pidl: Include Python.h first, to avoid warnings.

[Samba/eduardoll.git] / docs-xml / Samba3-ByExample / SBE-MakingHappyUsers.xml

<?xml version="1.0" encoding="iso-8859-1"?>
<!DOCTYPE chapter PUBLIC "-//Samba-Team//DTD DocBook V4.2-Based Variant V1.0//EN" "http://www.samba.org/samba/DTD/samba-doc">
<chapter id="happy">
  <title>Making Happy Users</title>

        <para>
        It is said that <quote>a day that is without troubles is not fulfilling.  Rather, give 
        me a day of troubles well handled so that I can be content with my achievements.</quote>
        </para>

        <para>
        In the world of computer networks, problems are as varied as the people who create them
        or experience them. The design of the network implemented in <link linkend="Big500users"/>
        may create problems for some network users. The following lists some of the problems that
        may occur:
        </para>

        <indexterm><primary>PDC</primary></indexterm>
        <indexterm><primary>network bandwidth</primary><secondary>utilization</secondary></indexterm>
        <indexterm><primary>BDC</primary></indexterm>
        <indexterm><primary>user account</primary></indexterm>
        <indexterm><primary>PDC/BDC ratio</primary></indexterm>
<caution><para>
A significant number of network administrators have responded to the guidance given
here. It should be noted that there are sites that have a single PDC for many hundreds of
concurrent network clients. Network bandwidth, network bandwidth utilization, and server load
are among the factors that determine the maximum number of Windows clients that
can be served by a single domain controller (PDC or BDC) on a network segment. It is possible
to operate with only a single PDC over a routed network. What is possible is not necessarily
<emphasis>best practice</emphasis>. When Windows client network logons begin to fail with
the message that the domain controller cannot be found or that the user account cannot
be found (when you know it exists), that may be an indication that the domain controller is
overloaded or network bandwidth is overloaded. The guidance given for PDC/BDC ratio to Windows
clients is conservative and if followed will minimize problems &smbmdash; but it is not absolute.
</para></caution>

        <variablelist>
                <varlistentry>
                <term>Users experiencing difficulty logging onto the network</term>
                <listitem><para>
                <indexterm><primary>network</primary><secondary>logon</secondary></indexterm>
                <indexterm><primary>multiple domain controllers</primary></indexterm>
                When a Windows client logs onto the network, many data packets are exchanged
                between the client and the server that is providing the network logon services.
                Each request between the client and the server must complete within a specific
                time limit. This is one of the primary factors that govern the installation of
                multiple domain controllers (usually called secondary or backup controllers).
                As a rough rule, there should be one such backup controller for every
                30 to 150 clients. The actual limits are determined by network operational
                characteristics. 
                </para>

                <para>
                <indexterm><primary>PDC</primary></indexterm>
                <indexterm><primary>BDC</primary></indexterm>
                <indexterm><primary>clients per DC</primary></indexterm>
                If the domain controller provides only network logon services
                and all file and print activity is handled by domain member servers, one domain 
                controller per 150 clients on a single network segment may suffice. In any
                case, it is highly recommended to have a minimum of one domain controller (PDC or BDC)
                per network segment. It is better to have at least one BDC on the network
                segment that has a PDC. If the domain controller is also used as a file and
                print server, the number of clients it can service reliably is reduced,
                and generally for low powered hardware should not exceed 30 machines (Windows 
                workstations plus domain member servers) per domain controller. Many sites are
                able to operate with more clients per domain controller, the number of clients
                that can be supported is limited by the CPU speed, memory and the workload on
                the Samba server as well as network bandwidth utilization.
                </para></listitem>
                </varlistentry>

                <varlistentry>
                <term>Slow logons and log-offs</term>
                <listitem><para>
                <indexterm><primary>slow logon</primary></indexterm>
                Slow logons and log-offs may be caused by many factors that include:

                        <itemizedlist>
                                <listitem><para>
                                <indexterm><primary>NetBIOS</primary><secondary>name resolution</secondary><tertiary>delays</tertiary></indexterm>
                                <indexterm><primary>WINS</primary><secondary>server</secondary></indexterm>
                                Excessive delays in the resolution of a NetBIOS name to its IP
                                address. This may be observed when an overloaded domain controller 
                                is also the WINS server. Another cause may be the failure to use
                                a WINS server (this assumes that there is a single network segment).
                                </para></listitem>

                                <listitem><para>
                                <indexterm><primary>traffic collisions</primary></indexterm>
                                <indexterm><primary>HUB</primary></indexterm>
                                <indexterm><primary>ethernet switch</primary></indexterm>
                                Network traffic collisions due to overloading of the network
                                segment. One short-term workaround to this may be to replace
                                network HUBs with Ethernet switches.
                                </para></listitem>

                                <listitem><para>
                                <indexterm><primary>networking hardware</primary><secondary>defective</secondary></indexterm>
                                Defective networking hardware. Over the past few years, we have seen
                                on the Samba mailing list a significant increase in the number of
                                problems that were traced to a defective network interface controller,
                                a defective HUB or Ethernet switch, or defective cabling. In most cases,
                                it was the erratic nature of the problem that ultimately pointed to
                                the cause of the problem.
                                </para></listitem>

                                <listitem><para>
                                <indexterm><primary>profile</primary><secondary>roaming</secondary></indexterm>
                                <indexterm><primary>MS Outlook</primary><secondary>PST file</secondary></indexterm>
                                Excessively large roaming profiles. This type of problem is typically
                                the result of poor user education as well as poor network management.
                                It can be avoided by users not storing huge quantities of email in
                                MS Outlook PST files as well as by not storing files on the desktop.
                                These are old bad habits that require much discipline and vigilance
                                on the part of network management.
                                </para></listitem>

                                <listitem><para>
                                <indexterm><primary>WebClient</primary></indexterm>
                                You should verify that the Windows XP WebClient service is not running.
                                The use of the WebClient service has been implicated in many Windows
                                networking-related problems.
                                </para></listitem>
                        </itemizedlist>
                        </para></listitem>
                </varlistentry>

                <varlistentry>
                <term>Loss of access to network drives and printer resources</term>
                <listitem><para>
                Loss of access to network resources during client operation may be caused by a number
                of factors, including:
                </para>

                        <itemizedlist>
                                <listitem><para>
                                <indexterm><primary>network</primary><secondary>overload</secondary></indexterm>
                                Network overload (typically indicated by a high network collision rate)
                                </para></listitem>

                                <listitem><para>
                                Server overload
                                </para></listitem>

                                <listitem><para>
                                <indexterm><primary>network</primary><secondary>timeout</secondary></indexterm>
                                Timeout causing the client to close a connection that is in use but has
                                been latent (no traffic) for some time (5 minutes or more)
                                </para></listitem>

                                <listitem><para>
                                <indexterm><primary>network hardware</primary><secondary>defective</secondary></indexterm>
                                Defective networking hardware
                                </para></listitem>
                        </itemizedlist>

                <para>
                <indexterm><primary>data</primary><secondary>corruption</secondary></indexterm>
                No matter what the cause, a sudden loss of access to network resources can
                result in BSOD (blue screen of death) situations that necessitate rebooting of the client
                workstation. In the case of a mild problem, retrying to access the network drive of the printer
                may restore operations, but in any case this is a serious problem that may lead to the next
                problem, data corruption.
                </para></listitem>
                </varlistentry>

                <varlistentry>
                <term>Potential data corruption</term>
                <listitem><para>
                <indexterm><primary>data</primary><secondary>corruption</secondary></indexterm>
                Data corruption is one of the most serious problems. It leads to uncertainty, anger, and 
                frustration, and generally precipitates immediate corrective demands. Management response
                to this type of problem may be rational, as well as highly irrational. There have been
                cases where management has fired network staff for permitting this situation to occur without 
                immediate correction. There have been situations where perfectly functional hardware was thrown 
                out and replaced, only to find the problem caused by a low-cost network hardware item. There 
                have been cases where server operating systems were replaced, or where Samba was updated, 
                only to later isolate the problem due to defective client software.
                </para></listitem>
                </varlistentry>
        </variablelist>

        <para>
        In this chapter, you can work through a number of measures that significantly arm you to
        anticipate and combat network performance issues. You can work through complex and thorny
        methods to improve the reliability of your network environment, but be warned that all such steps
        demand the price of complexity.
        </para>

<sect1>
<title>Regarding LDAP Directories and Windows Computer Accounts</title>

        <para>
        <indexterm><primary>LDAP</primary><secondary>directory</secondary></indexterm>
        Computer (machine) accounts can be placed wherever you like in an LDAP directory subject to some 
        constraints that are described in this section.
        </para>

        <para>
        <indexterm><primary>POSIX</primary></indexterm>
        <indexterm><primary>SambaSAMAccount</primary></indexterm>
        <indexterm><primary>machine account</primary></indexterm>
        <indexterm><primary>trust account</primary></indexterm>
        The POSIX and SambaSAMAccount components of computer (machine) accounts are both used by Samba. 
        That is, machine  accounts are treated inside Samba in the same way that Windows NT4/200X treats 
        them. A user account and a machine account are indistinguishable from each other, except that
        the machine account ends in a $ character, as do trust accounts.
        </para>

        <para>
        <indexterm><primary>account</primary></indexterm>
        <indexterm><primary>UID</primary></indexterm>
        The need for Windows user, group, machine, trust, and other such accounts to be tied to a valid UNIX UID
        is a design decision that was made a long way back in the history of Samba development. It is 
        unlikely that this decision will be reversed or changed during the remaining life of the 
        Samba-3.x series. 
        </para>

        <para>
        <indexterm><primary>SID</primary></indexterm>
        <indexterm><primary>NSS</primary></indexterm>
        The resolution of a UID from the Windows SID is achieved within Samba through a mechanism that
        must refer back to the host operating system on which Samba is running. The name service
        switch (NSS) is the preferred mechanism that shields applications (like Samba) from the
        need to know everything about every host OS it runs on.
        </para>

        <para>
        Samba asks the host OS to provide a UID via the <quote>passwd</quote>, <quote>shadow</quote>
        and <quote>group</quote> facilities in the NSS control (configuration) file. The best tool
        for achieving this is left up to the UNIX administrator to determine. It is not imposed by
        Samba. Samba provides winbindd together with its support libraries as one method. It is
        possible to do this via LDAP, and for that Samba provides the appropriate hooks so that
        all account entities can be located in an LDAP directory.
        </para>

        <para>
        <indexterm><primary>nss_ldap</primary></indexterm>
        For many the weapon of choice is to use the PADL nss_ldap utility. This utility must
        be configured so that computer accounts can be resolved to a POSIX/UNIX account UID. That
        is fundamentally an LDAP design question.  The information provided on the Samba list and
        in the documentation is directed at providing working examples only. The design
        of an LDAP directory is a complex subject that is beyond the scope of this documentation.
        </para>

</sect1>


<sect1>
        <title>Introduction</title>

        <para>
        You just opened an email from Christine that reads:
        </para>

        <para>
        Good morning,
        <blockquote><attribution>Christine</attribution><para>
        A few months ago we sat down to design the network. We discussed the challenges ahead and we all
        agreed to compromise our design to keep it simple. We knew there would be problems, but anticipated
        that we would have some time to resolve any issues that might be encountered.
        </para>

        <para>
        As you now know, we started off on the wrong foot. We have a lot of unhappy users. One of them
        resigned yesterday afternoon because she was under duress to complete some critical projects. She
        suffered a blue screen of death situation just as she was finishing four hours of intensive work, all
        of which was lost. She has a unique requirement that involves storing large files on her desktop.
        Mary's desktop profile is nearly 1 GB in size. As a result of her desktop configuration, it
        takes her nearly 15 minutes just to log onto her workstation. But that is not enough. Because all
        network logon traffic passes over the network links between our buildings, logging on may take
        three or four attempts due to blue screen problems associated with network timeouts.
        </para>

        <para>
        A few of us worked to help her out of trouble. We convinced her to stay and promised to fully 
        resolve the difficulties she is facing. We have no choice. We must implement LDAP and set hard 
        limits on what our users can do with their desktops. Otherwise, we face staff losses 
        that can surely do harm to our growth as well as to staff morale. I am sure we can better deal 
        with the consequences of what we know we must do than we can with the unrest we have now.
        </para>

        <para>
        Stan and I have discussed the current situation. We are resolved to help our users and protect
        the well being of Abmas. Please acknowledge this advice with consent to proceed as required to
        regain control of our vital IT operations.
        </para></blockquote>
        </para>

        <para>
        <indexterm><primary>compromise</primary></indexterm>    
        <indexterm><primary>network</primary><secondary>multi-segment</secondary></indexterm>
        Every compromise has consequences. Having a large routed (i.e., multisegment) network with only a
        single domain controller is a poor design that has obvious operational effects that may
        frustrate users. Here is your reply:
        </para>

        <blockquote><attribution>Bob</attribution><para>
        Christine, Your diligence and attention to detail are much valued. Stan and I fully support your
        proposals to resolve the issues. I am confident that your plans fully realized will significantly
        boost staff morale. Please go ahead with your plans. If you have any problems, please let me know.
        Please let Stan know what the estimated cost will be so I can approve the expense. Do not wait
        for approval; I appreciate the urgency.
        </para></blockquote>

        <sect2>
                <title>Assignment Tasks</title>

                <para>
                The priority of assigned tasks in this chapter is:
                </para>

                <orderedlist>
                        <listitem><para>
                        <indexterm><primary>Backup Domain Controller</primary><see>BDC</see></indexterm>
                        <indexterm><primary>BDC</primary></indexterm>
                        <indexterm><primary>tdbsam</primary></indexterm>
                        <indexterm><primary>LDAP</primary></indexterm><indexterm><primary>migration</primary></indexterm>
                        Implement Backup Domain Controllers (BDCs) in each building. This involves
                        a change from a <emphasis>tdbsam</emphasis> backend that was used in the previous
                        chapter to an LDAP-based backend.
                        </para>

                        <para>
                        You can implement a single central LDAP server for this purpose.
                        </para></listitem>

                        <listitem><para>
                        <indexterm><primary>logon time</primary></indexterm>
                        <indexterm><primary>network share</primary></indexterm>
                        <indexterm><primary>default profile</primary></indexterm>
                        <indexterm><primary>profile</primary><secondary>default</secondary></indexterm>
                        Rectify the problem of excessive logon times. This involves redirection of
                        folders to network shares as well as modification of all user desktops to
                        exclude the redirected folders from being loaded at login time. You can also
                        create a new default profile that can be used for all new users.
                        </para></listitem>
                </orderedlist>

                <para>
                <indexterm><primary>disk image</primary></indexterm>
                You configure a new MS Windows XP Professional workstation disk image that you roll out
                to all desktop users. The instructions you have created are followed on a staging machine
                from which all changes can be carefully tested before inflicting them on your network users.
                </para>

                <para>
                <indexterm><primary>CUPS</primary></indexterm>
                This is the last network example in which specific mention of printing is made. The example
                again makes use of the CUPS printing system.
                </para>

        </sect2>

</sect1>

<sect1>
        <title>Dissection and Discussion</title>

        <para>
        <indexterm><primary>BDC</primary></indexterm>
        <indexterm><primary>LDAP</primary></indexterm>
        <indexterm><primary>OpenLDAP</primary></indexterm>
        The implementation of Samba BDCs necessitates the installation and configuration of LDAP.
        For this site, you use OpenLDAP, the open source software LDAP server platform. Commercial
        LDAP servers in current use with Samba-3 include:
        </para>

        <itemizedlist>
                <listitem><para>
                <indexterm><primary>eDirectory</primary></indexterm>
                Novell <ulink url="http://www.novell.com/products/edirectory/">eDirectory</ulink>
                is being successfully used by some sites. Information on how to use eDirectory can be
                obtained from the Samba mailing lists or from Novell.
                </para></listitem>

                <listitem><para>
                <indexterm><primary>Tivoli Directory Server</primary></indexterm>
                IBM <ulink url="http://www-306.ibm.com/software/tivoli/products/directory-server/">Tivoli 
                Directory Server</ulink> can be used to provide the Samba LDAP backend. Example schema 
                files are provided in the Samba source code tarball under the directory 
                <filename>~samba/example/LDAP.</filename>
                </para></listitem> 

                <listitem><para>
                <indexterm><primary>Sun ONE Identity Server</primary></indexterm>
                Sun <ulink url="http://www.sun.com/software/software/products/identity_srvr/home_identity.xml">ONE Identity 
                Server product suite</ulink> provides an LDAP server that can be used for Samba.
                Example schema files are provided in the Samba source code tarball under the directory
                <filename>~samba/example/LDAP.</filename>
                </para></listitem>
        </itemizedlist>

        <para>
        A word of caution is fully in order. OpenLDAP is purely an LDAP server, and unlike commercial
        offerings, it requires that you manually edit the server configuration files and manually
        initialize the LDAP directory database. OpenLDAP itself has only command-line tools to
        help you to get OpenLDAP and Samba-3 running as required, albeit with some learning curve challenges.
        </para>

        <para>
        <indexterm><primary>Active Directory</primary></indexterm>
        For most sites, the deployment of Microsoft Active Directory from the shrink-wrapped installation is quite
        adequate. If you are migrating from Microsoft Active Directory, be warned that OpenLDAP does not include
        GUI-based directory management tools. Even a simple task such as adding users to the OpenLDAP database 
        requires an understanding of what you are doing, why you are doing it, and the tools that you must use.
        </para>

        <para>
        <indexterm><primary>Identity Management</primary></indexterm>
        <indexterm><primary>high availability</primary></indexterm>
        <indexterm><primary>directory</primary><secondary>replication</secondary></indexterm>
        <indexterm><primary>directory</primary><secondary>synchronization</secondary></indexterm>
        <indexterm><primary>performance</primary></indexterm>
        <indexterm><primary>directory</primary><secondary>management</secondary></indexterm>
        <indexterm><primary>directory</primary><secondary>schema</secondary></indexterm>
        When installed and configured, an OpenLDAP Identity Management backend for Samba functions well. 
        High availability operation may be obtained through directory replication/synchronization and 
        master/slave server configurations. OpenLDAP is a mature platform to host the organizational 
        directory infrastructure that can include all UNIX accounts, directories for electronic mail, and much more. 
        The price paid through learning how to design an LDAP directory schema in implementation and configuration 
        of management tools is well rewarded by performance and flexibility and the freedom to manage directory
        contents with greater ability to back up, restore, and modify the directory than is generally possible
        with Microsoft Active Directory.
        </para>

        <para>
        <indexterm><primary>comparison</primary><secondary>Active Directory &amp; OpenLDAP</secondary></indexterm>
        <indexterm><primary>ADAM</primary></indexterm>
        <indexterm><primary>Active Directory</primary></indexterm>
        <indexterm><primary>OpenLDAP</primary></indexterm>
        A comparison of OpenLDAP with Microsoft Active Directory does not do justice to either. OpenLDAP is an LDAP directory
        tool-set. Microsoft Active Directory Server is an implementation of an LDAP server that is largely preconfigured
        for a specific task orientation. It comes with a set of administrative tools that is entirely customized
        for the purpose of running MS Windows applications that include file and print services, Microsoft Exchange
        server, Microsoft SQL server, and more. The complexity of OpenLDAP is highly valued by the UNIX administrator
        who wants to build a custom directory solution. Microsoft provides an application called 
        <ulink url="http://www.microsoft.com/windowsserver2003/adam/default.mspx">
        MS ADAM</ulink> that provides more generic LDAP services, yet it does not have the vanilla-like services
        of OpenLDAP.
        </para>

        <para>
        <indexterm><primary>directory</primary><secondary>schema</secondary></indexterm>
        <indexterm><primary>passdb backend</primary></indexterm>
        You may wish to consider outsourcing the development of your OpenLDAP directory to an expert, particularly
        if you find the challenge of learning about LDAP directories, schemas, configuration, and management
        tools and the creation of shell and Perl scripts a bit
        challenging. OpenLDAP can be easily customized, though it includes
        many ready-to-use schemas. Samba-3 provides an OpenLDAP schema file
        that is required for use as a passdb backend.
        </para>

        <para>
        <indexterm><primary>interoperability</primary></indexterm>
        For those who are willing to brave the process of installing and configuring LDAP and Samba-3 interoperability,
        there are a few nice Web-based tools that may help you to manage your users and groups more effectively.
        The Web-based tools you might like to consider include the
        <ulink url="http://lam.sourceforge.net/">LDAP Account Manager</ulink> (LAM) and the Webmin-based
        <ulink url="http://www.webmin.com">Webmin</ulink> Idealx
        <ulink url="http://webmin.idealx.org/index.en.html">CGI tools</ulink>.
        </para>

        <para>
        Some additional LDAP tools should be mentioned. Every so often a Samba user reports using one of 
        these, so it may be useful to them: 
        <ulink url="http://biot.com/gq">GQ</ulink>, a GTK-based LDAP browser; 
        LDAP <ulink url="http://www.iit.edu/~gawojar/ldap/">Browser/Editor</ulink> 
        <ulink url="http://www.jxplorer.org/">; JXplorer</ulink> (by Computer Associates);
        and <ulink url="http://phpldapadmin.sourceforge.net/">phpLDAPadmin</ulink>.
        </para>

        <note><para>
        The following prescriptive guidance is not an LDAP tutorial. The LDAP implementation expressly uses minimal
        security controls. No form of secure LDAP communications is attempted. The LDAP configuration information provided
        is considered to consist of the barest essentials only. You are strongly encouraged to learn more about
        LDAP before attempting to deploy it in a business-critical environment.
        </para></note>

        <para>
        Information to help you get started with OpenLDAP is available from the
        <ulink url="http://www.openldap.org/pub/">OpenLDAP web site</ulink>. Many people have found the book
        <ulink url="http://www.oreilly.com/catalog/ldapsa/index.html"><emphasis>LDAP System Administration</emphasis>,</ulink>
        by Jerry Carter quite useful.
        </para>

        <para>
        <indexterm><primary>BDC</primary></indexterm>
        <indexterm><primary>network</primary><secondary>segment</secondary></indexterm>
        <indexterm><primary>performance</primary></indexterm>
        <indexterm><primary>network</primary><secondary>wide-area</secondary></indexterm>
        Mary's problems are due to two factors. First, the absence of a domain controller on the local network is the
        main cause of the errors that result in blue screen crashes. Second, Mary has a large profile that must
        be loaded over the WAN connection. The addition of BDCs on each network segment significantly
        improves overall network performance for most users, but it is not enough. You must gain control over
        user desktops, and this must be done in a way that wins their support and does not cause further loss of
        staff morale. The following procedures solve this problem.
        </para>

        <para>
        <indexterm><primary>smart printing</primary></indexterm>
        There is also an opportunity to implement smart printing features. You add this to the Samba configuration
        so that future printer changes can be managed without need to change desktop configurations.
        </para>

        <para>
        You add the ability to automatically download new printer drivers, even if they are not installed 
        in the default desktop profile. Only one example of printing configuration is given. It is assumed that
        you can extrapolate the principles and use them to install all printers that may be needed.
        </para>

        <sect2>
        <title>Technical Issues</title>

        <para>
        <indexterm><primary>identity</primary><secondary>management</secondary></indexterm>
        <indexterm><primary>directory</primary><secondary>server</secondary></indexterm>
        <indexterm><primary>Posix</primary></indexterm>
        The solution provided is a minimal approach to getting OpenLDAP running as an identity management directory
        server for UNIX system accounts as well as for Samba. From the OpenLDAP perspective, UNIX system
        accounts are stored POSIX schema extensions. Samba provides its own schema to permit storage of account 
        attributes Samba needs. Samba-3 can use the LDAP backend to store:
        </para>
        
        <itemizedlist>
                <listitem><para>Windows Networking User Accounts</para></listitem>
                <listitem><para>Windows NT Group Accounts</para></listitem>
                <listitem><para>Mapping Information between UNIX Groups and Windows NT Groups</para></listitem>
                <listitem><para>ID Mappings for SIDs to UIDs (also for foreign Domain SIDs)</para></listitem>
        </itemizedlist>

        <para>
        <indexterm><primary>UNIX accounts</primary></indexterm>
        <indexterm><primary>Windows accounts</primary></indexterm>
        <indexterm><primary>PADL LDAP tools</primary></indexterm>
        <indexterm><primary>/etc/group</primary></indexterm>
        <indexterm><primary>LDAP</primary></indexterm>
        <indexterm><primary>name service switch</primary><see>NSS</see></indexterm>
        <indexterm><primary>NSS</primary></indexterm>
        <indexterm><primary>UID</primary></indexterm>
        <indexterm><primary>nss_ldap</primary></indexterm>
        The use of LDAP with Samba-3 makes it necessary to store UNIX accounts as well as Windows Networking
        accounts in the LDAP backend. This implies the need to use the 
        <ulink url="http://www.padl.com/Contents/OpenSourceSoftware.html">PADL LDAP tools</ulink>. The resolution 
        of the UNIX group name to its GID must be enabled from either the <filename>/etc/group</filename> 
        or from the LDAP backend. This requires the use of the PADL <filename>nss_ldap</filename> tool-set
        that integrates with the NSS. The same requirements exist for resolution
        of the UNIX username to the UID. The relationships are demonstrated in <link linkend="sbehap-LDAPdiag"/>.
        </para>

        <figure id="sbehap-LDAPdiag">
                <title>The Interaction of LDAP, UNIX Posix Accounts and Samba Accounts</title>
                <imagefile scale="50">UNIX-Samba-and-LDAP</imagefile>
        </figure>

        <para>
        <indexterm><primary>security</primary></indexterm>
        <indexterm><primary>LDAP</primary><secondary>secure</secondary></indexterm>
        You configure OpenLDAP so that it is operational. Before deploying the OpenLDAP, you really
        ought to learn how to configure secure communications over LDAP so that site security is not
        at risk. This is not covered in the following guidance.
        </para>

        <para>
        <indexterm><primary>PDC</primary></indexterm>
        <indexterm><primary>LDAP Interchange Format</primary><see>LDIF</see></indexterm>
        <indexterm><primary>LDIF</primary></indexterm>
        <indexterm><primary>secrets.tdb</primary></indexterm>
        When OpenLDAP has been made operative, you configure the PDC called <constant>MASSIVE</constant>.
        You initialize the Samba <filename>secrets.tdb<subscript></subscript></filename> file. Then you
        create the LDAP Interchange Format (LDIF) file from which the LDAP database can be initialized.
        You need to decide how best to create user and group accounts. A few hints are, of course, provided.
        You can also find on the enclosed CD-ROM, in the <filename>Chap06</filename> directory, a few tools
        that help to manage user and group configuration.
        </para>

        <para>
        <indexterm><primary>folder redirection</primary></indexterm>
        <indexterm><primary>default profile</primary></indexterm>
        <indexterm><primary>roaming profile</primary></indexterm>
        In order to effect folder redirection and to add robustness to the implementation,
        create a network default profile. All network users workstations are configured to use
        the new profile. Roaming profiles will automatically be deleted from the workstation
        when the user logs off.
        </para>

        <para>
        <indexterm><primary>mandatory profile</primary></indexterm>
        The profile is configured so that users cannot change the appearance
        of their desktop. This is known as a mandatory profile. You make certain that users
        are able to use their computers efficiently.
        </para>

        <para>
        <indexterm><primary>logon script</primary></indexterm>
        A network logon script is used to deliver flexible but consistent network drive
        connections.
        </para>

                <sect3 id="sbehap-ppc">
                <title>Addition of Machines to the Domain</title>

                <para>
                <indexterm><primary></primary></indexterm>
                <indexterm><primary></primary></indexterm>
                <indexterm><primary></primary></indexterm>
                <indexterm><primary></primary></indexterm>
                Samba versions prior to 3.0.11 necessitated the use of a domain administrator account
                that maps to the UNIX UID=0. The UNIX operating system permits only the <constant>root</constant>
                user to add user and group accounts. Samba 3.0.11 introduced a new facility known as
                <constant>Privileges</constant>, which provides five new privileges that
                can be assigned to users and/or groups; see Table 5.1.
                </para>


                <table id="sbehap-privs">
                        <title>Current Privilege Capabilities</title>
                        <tgroup cols="2">
                                <colspec align="left"/>
                                <colspec align="left"/>
                                <thead>
                                        <row>
                                                <entry align="left">Privilege</entry>
                                                <entry align="left">Description</entry>
                                        </row>
                                </thead>
                                <tbody>
                                        <row>
                                                <entry><para>SeMachineAccountPrivilege</para></entry>
                                                <entry><para>Add machines to domain</para></entry>
                                        </row>
                                        <row>
                                                <entry><para>SePrintOperatorPrivilege</para></entry>
                                                <entry><para>Manage printers</para></entry>
                                        </row>
                                        <row>
                                                <entry><para>SeAddUsersPrivilege</para></entry>
                                                <entry><para>Add users and groups to the domain</para></entry>
                                        </row>
                                        <row>
                                                <entry><para>SeRemoteShutdownPrivilege</para></entry>
                                                <entry><para>Force shutdown from a remote system</para></entry>
                                        </row>
                                        <row>
                                                <entry><para>SeDiskOperatorPrivilege</para></entry>
                                                <entry><para>Manage disk share</para></entry>
                                        </row>
                                </tbody>
                        </tgroup>
                </table>

                <para>
                In this network example use is made of one of the supported privileges purely to demonstrate
                how any user can now be given the ability to add machines to the domain using a normal user account
                that has been given the appropriate privileges.
                </para>

                </sect3>

                <sect3>
                <title>Roaming Profile Background</title>

                <para>
                As XP roaming profiles grow, so does the amount of time it takes to log in and out.
                </para>

                <para>
                <indexterm><primary>roaming profile</primary></indexterm>
                <indexterm><primary>HKEY_CURRENT_USER</primary></indexterm>
                <indexterm><primary>NTUSER.DAT</primary></indexterm>
                <indexterm><primary>%USERNAME%</primary></indexterm>
                An XP roaming profile consists of the <constant>HKEY_CURRENT_USER</constant> hive file
                <filename>NTUSER.DAT</filename> and a number of folders (My Documents, Application Data,
                Desktop, Start Menu, Templates, NetHood, Favorites, and so on).  When a user logs onto the 
                network with the default configuration of MS Windows NT/200x/XPP, all this data is 
                copied to the local machine under the <filename>C:\Documents and Settings\%USERNAME%</filename>
                directory. While the user is logged in, any changes made to any of these folders or to the
                <constant>HKEY_CURRENT_USER</constant> branch of the registry are made to the local copy
                of the profile.  At logout the profile data is copied back to the server. This behavior
                can be changed through appropriate registry changes and/or through changes to the default
                user profile. In the latter case, it updates the registry with the values that are set in the
                profile <filename>NTUSER.DAT</filename>
                file.
                </para>

                <para>
                The first challenge is to reduce the amount of data that must be transferred to and 
                from the profile server as roaming profiles are processed.  This includes removing 
                all the shortcuts in the Recent directory, making sure the cache used by the Web browser 
                is not being dumped into the <filename>Application Data</filename> folder, removing the 
                Java plug-ins cache (the .jpi_cache directory in the profile), as well as training the 
                user to not place large files on the desktop and to use his or her mapped home directory
                instead of the <filename>My Documents</filename> folder for saving documents.
                </para>

                <para>
                <indexterm><primary>My Documents</primary></indexterm>
                Using a folder other than <filename>My Documents</filename> is a nuisance for 
                some users, since many applications use it by default.
                </para>

                <para>
                <indexterm><primary>roaming profiles</primary></indexterm>
                <indexterm><primary>Local Group Policy</primary></indexterm>
                <indexterm><primary>NTUSER.DAT</primary></indexterm>
                The secret to rapid loading of roaming profiles is to prevent unnecessary data from 
                being copied back and forth, without losing any functionality. This is not difficult; 
                it can be done by making changes to the Local Group Policy on each client as well 
                as changing some paths in each user's <filename>NTUSER.DAT</filename> hive.
                </para>

                <para>
                <indexterm><primary>Network Default Profile</primary></indexterm>
                <indexterm><primary>redirected folders</primary></indexterm>
                Every user profile has its own <filename>NTUSER.DAT</filename> file. This means
                you need to edit every user's profile, unless a better method can be
                followed. Fortunately, with the right preparations, this is not difficult.
                It is possible to remove the <filename>NTUSER.DAT</filename> file from each
                user's profile. Then just create a Network Default Profile. Of course, it is
                necessary to copy all files from redirected folders to the network share to which
                they are redirected.
                </para>

                </sect3>

                <sect3 id="sbehap-locgrppol">
                <title>The Local Group Policy</title>

                <para>
                <indexterm><primary>Group Policy Objects</primary></indexterm>
                <indexterm><primary>Active Directory</primary></indexterm>
                <indexterm><primary>PDC</primary></indexterm>
                <indexterm><primary>Group Policy editor</primary></indexterm>
                Without an Active Directory PDC, you cannot take full advantage of Group Policy 
                Objects. However, you can still make changes to the Local Group Policy by using 
                the Group Policy editor (<command>gpedit.msc</command>).
                </para>

                <para>
                The <emphasis>Exclude directories in roaming profile</emphasis> settings can 
                be found under 
                <menuchoice>
                        <guimenu>User Configuration</guimenu>
                        <guimenuitem>Administrative Templates</guimenuitem>
                        <guimenuitem>System</guimenuitem>
                        <guimenuitem>User Profiles</guimenuitem>
                </menuchoice>. 
                By default this setting contains
                <quote>Local Settings; Temporary Internet Files; History; Temp</quote>.
                </para>

                <para>
                Simply add the folders you do not wish to be copied back and forth to this 
                semicolon-separated list. Note that this change must be made on all clients 
                that are using roaming profiles.
                </para>

                </sect3>

                <sect3>
                <title>Profile Changes</title>

                <para>
                <indexterm><primary>NTUSER.DAT</primary></indexterm>
                <indexterm><primary>%USERNAME%</primary></indexterm>
                There are two changes that should be done to each user's profile. Move each of 
                the directories that you have excluded from being copied back and forth out of 
                the usual profile path. Modify each user's <filename>NTUSER.DAT</filename> file 
                to point to the new paths that are shared over the network instead of to the default
                path (<filename>C:\Documents and Settings\%USERNAME%</filename>).
                </para>

                <para>
                <indexterm><primary>Default User</primary></indexterm>
                <indexterm><primary>regedt32</primary></indexterm>
                The above modifies existing user profiles. So that newly created profiles have 
                these settings, you need to modify the <filename>NTUSER.DAT</filename> in 
                the <filename>C:\Documents and Settings\Default User</filename> folder on each 
                client machine, changing the same registry keys.  You could do this by copying 
                <filename>NTUSER.DAT</filename> to a Linux box and using <command>regedt32</command>.
                The basic method is described under <link linkend="redirfold"/>.
                </para>

                </sect3>

                <sect3>
                <title>Using a Network Default User Profile</title>

                <para>
                <indexterm><primary>NETLOGON</primary></indexterm>
                <indexterm><primary>NTUSER.DAT</primary></indexterm>
                If you are using Samba as your PDC, you should create a file share called 
                <constant>NETLOGON</constant> and within that create a directory called 
                <filename>Default User</filename>, which is a copy of the desired default user 
                configuration (including a copy of <filename>NTUSER.DAT</filename>).
                If this share exists and the <filename>Default User</filename> folder exists, 
                the first login from a new account pulls its configuration from it.
                See also <ulink url="http://isg.ee.ethz.ch/tools/realmen/det/skel.en.html">
                the Real Men Don't Click</ulink> Web site.
                </para>

                </sect3>

                <sect3>
                <title>Installation of Printer Driver Auto-Download</title>

                <para>
                <indexterm><primary>printing</primary><secondary>dumb</secondary></indexterm>
                <indexterm><primary>dumb printing</primary></indexterm>
                <indexterm><primary>Raw Print Through</primary></indexterm>
                The subject of printing is quite topical. Printing problems run second place to name
                resolution issues today. So far in this book, you have experienced only what is generally
                known as <quote>dumb</quote> printing. Dumb printing is the arrangement by which all drivers
                are manually installed on each client and the printing subsystems perform no filtering
                or intelligent processing. Dumb printing is easily understood. It usually works without
                many problems, but it has its limitations also. Dumb printing is better known as
                <command>Raw-Print-Through</command> printing.
                </para>

                <para>
                <indexterm><primary>printing</primary><secondary>drag-and-drop</secondary></indexterm>
                <indexterm><primary>printing</primary><secondary>point-n-click</secondary></indexterm>
                Samba permits the configuration of <command>smart</command> printing using the Microsoft
                Windows point-and-click (also called drag-and-drop) printing. What this provides is
                essentially the ability to print to any printer. If the local client does not yet have a
                driver installed, the driver is automatically downloaded from the Samba server and
                installed on the client. Drag-and-drop printing is neat; it means the user never needs
                to fuss with driver installation, and that is a <trademark>Good Thing,</trademark>
                isn't it?
                </para>

                <para>
                There is a further layer of print job processing that is known as <command>intelligent</command>
                printing that automatically senses the file format of data submitted for printing and
                then invokes a suitable print filter to convert the incoming data stream into a format
                suited to the printer to which the job is dispatched.
                </para>

                <para>
                <indexterm><primary>CUPS</primary></indexterm>
                <indexterm><primary>Easy Software Products</primary></indexterm>
                <indexterm><primary>Postscript</primary></indexterm>
                The CUPS printing subsystem is capable of intelligent printing. It has the capacity to
                detect the data format and apply a print filter. This means that it is feasible to install
                on all Windows clients a single printer driver for use with all printers that are routed
                through CUPS. The most sensible driver to use is one for a PostScript printer. Fortunately,
                <ulink url="http://www.easysw.com">Easy Software Products</ulink>, the authors of CUPS, have
                released a PostScript printing driver for Windows. It can be installed into the Samba
                printing backend so that it automatically downloads to the client when needed. 
                </para>

                <para>
                This means that so long as there is a CUPS driver for the printer, all printing from Windows 
                software can use PostScript, no matter what the actual printer language for the physical 
                device is. It also means that the administrator can swap out a printer with a totally 
                different type of device without ever needing to change a client workstation driver.
                </para>

                <para>
                This book is about Samba-3, so you can confine the printing style to just the smart
                style of installation. Those interested in further information regarding intelligent
                printing should review documentation on the Easy Software Products Web site.
                </para>

                </sect3>

                <sect3 id="sbeavoid">
                <title>Avoiding Failures: Solving Problems Before They Happen</title>

                <para>
                It has often been said that there are three types of people in the world: those who
                have sharp minds and those who forget things. Please do not ask what the third group
                is like! Well, it seems that many of us have company in the second group. There must
                be a good explanation why so many network administrators fail to solve apparently
                simple problems efficiently and effectively.
                </para>

                <para>
                Here are some diagnostic guidelines that can be referred to when things go wrong:
                </para>

                <sect4>
                <title>Preliminary Advice: Dangers Can Be Avoided</title>

                <para>
                The best advice regarding how to mend a broken leg is <quote>Never break a leg!</quote>
                </para>

                <para>
                <indexterm><primary>LDAP</primary></indexterm>
                Newcomers to Samba and LDAP seem to struggle a great deal at first.  If you want advice
                regarding the best way to remedy LDAP and Samba problems: <quote>Avoid them like the plague!</quote>
                </para>

                <para>
                If you are now asking yourself how problems can be avoided, the best advice is to start
                out your learning experience with a <emphasis>known-good configuration.</emphasis> After
                you have seen a fully working solution, a good way to learn is to make slow and progressive
                changes that cause things to break, then observe carefully how and why things ceased to work.
                </para>

                <para>
                The examples in this chapter (also in the book as a whole) are known to work. That means
                that they could serve as the kick-off point for your journey through fields of knowledge.
                Use this resource carefully; we hope it serves you well.
                </para>

                <warning><para>
                Do not be lulled into thinking that you can easily adopt the examples in this
                book and adapt them without first working through the examples provided. A little
                thing overlooked can cause untold pain and may permanently tarnish your experience.
                </para></warning>

                </sect4>

                <sect4>
                <title>The Name Service Caching Daemon</title>

                <para>
                The name service caching daemon (nscd) is a primary cause of difficulties with name
                resolution, particularly where <command>winbind</command> is used. Winbind does its
                own caching, thus nscd causes double caching which can lead to peculiar problems during
                debugging. As a rule, it is a good idea to turn off the name service caching daemon.
                </para>

                <para>
                Operation of the name service caching daemon is controlled by the 
                <filename>/etc/nscd.conf</filename> file. Typical contents of this file are as follows:
<screen>
# /etc/nscd.conf
# An example Name Service Cache config file.  This file is needed by nscd.
# Legal entries are:
#       logfile                 &lt;file&gt;
#       debug-level             &lt;level&gt;
#       threads                 &lt;threads to use&gt;
#       server-user             &lt;user to run server as instead of root&gt;
#               server-user is ignored if nscd is started with -S parameters
#       stat-user               &lt;user who is allowed to request statistics&gt;
#       reload-count            unlimited|&lt;number&gt;
#
#       enable-cache            &lt;service&gt; &lt;yes|no&gt;
#       positive-time-to-live   &lt;service&gt; &lt;time in seconds&gt;
#       negative-time-to-live   &lt;service&gt; &lt;time in seconds&gt;
#       suggested-size          &lt;service&gt; &lt;prime number&gt;
#       check-files             &lt;service&gt; &lt;yes|no&gt;
#       persistent              &lt;service&gt; &lt;yes|no&gt;
#       shared                  &lt;service&gt; &lt;yes|no&gt;
# Currently supported cache names (services): passwd, group, hosts
#       logfile                 /var/log/nscd.log
#       threads                 6
#       server-user             nobody
#       stat-user               somebody
        debug-level             0
#       reload-count            5
        enable-cache            passwd          yes
        positive-time-to-live   passwd          600
        negative-time-to-live   passwd          20
        suggested-size          passwd          211
        check-files             passwd          yes
        persistent              passwd          yes
        shared                  passwd          yes
        enable-cache            group           yes
        positive-time-to-live   group           3600
        negative-time-to-live   group           60
        suggested-size          group           211
        check-files             group           yes
        persistent              group           yes
        shared                  group           yes
# !!!!!WARNING!!!!! Host cache is insecure!!! The mechanism in nscd to
# cache hosts will cause your local system to not be able to trust
# forward/reverse lookup checks. DO NOT USE THIS if your system relies on
# this sort of security mechanism. Use a caching DNS server instead.
        enable-cache            hosts           no
        positive-time-to-live   hosts           3600
        negative-time-to-live   hosts           20
        suggested-size          hosts           211
        check-files             hosts           yes
        persistent              hosts           yes
        shared                  hosts           yes
</screen>
        It is feasible to comment out the <constant>passwd</constant> and <constant>group</constant>
        entries so they will not be cached. Alternatively, it is often simpler to just disable the
        <command>nscd</command> service by executing (on Novell SUSE Linux):
<screen>
&rootprompt; chkconfig nscd off
&rootprompt; rcnscd off
</screen>
                </para>

                </sect4>

                <sect4>
                <title>Debugging LDAP</title>

                <para>
                <indexterm><primary>/etc/openldap/slapd.conf</primary></indexterm>
                <indexterm><primary>loglevel</primary></indexterm>
                <indexterm><primary>slapd</primary></indexterm>
                In the example <filename>/etc/openldap/slapd.conf</filename> control file
                (see <link linkend="sbehap-dbconf"/>) there is an entry for <constant>loglevel  256</constant>.
                To enable logging via the syslog infrastructure, it is necessary to uncomment this parameter
                and restart <command>slapd</command>.
                </para>

                <para>
                <indexterm><primary>/etc/syslog.conf</primary></indexterm>
                <indexterm><primary>/var/log/ldaplogs</primary></indexterm>
                LDAP log information can be directed into a file that is separate from the normal system
                log files by changing the <filename>/etc/syslog.conf</filename> file so it has the following
                contents:
<screen>
# Some foreign boot scripts require local7
#
local0,local1.*                 -/var/log/localmessages
local2,local3.*                 -/var/log/localmessages
local5.*                        -/var/log/localmessages
local6,local7.*                 -/var/log/localmessages
local4.*                        -/var/log/ldaplogs
</screen>
                In this case, all LDAP-related logs will be directed to the file
                <filename>/var/log/ldaplogs</filename>. This makes it easy to track LDAP errors.
                The snippet provides a simple example of usage that can be modified to suit
                local site needs. The configuration used later in this chapter reflects such
                customization with the intent that LDAP log files will be stored at a location
                that meets local site needs and wishes more fully.
                </para>

                </sect4>

                <sect4>
                <title>Debugging NSS_LDAP</title>

                <para>
                The basic mechanism for diagnosing problems with the nss_ldap utility involves adding to the
                <filename>/etc/ldap.conf</filename> file the following parameters:
<screen>
debug 256
logdir /data/logs
</screen>
                Create the log directory as follows:
<screen>
&rootprompt; mkdir /data/logs
</screen>
                </para>

<?latex \newpage ?>

                <para>
                The diagnostic process should follow these steps:
                </para>

                <procedure>
                <title>NSS_LDAP Diagnostic Steps</title>

                        <step><para>
                        Verify the <constant>nss_base_passwd, nss_base_shadow, nss_base_group</constant> entries
                        in the <filename>/etc/ldap.conf</filename> file and compare them closely with the directory
                        tree location that was chosen when the directory was first created.
                        </para>

                        <para>
                        One way this can be done is by executing:
<screen>
&rootprompt; slapcat | grep Group | grep dn
dn: ou=Groups,dc=abmas,dc=biz
dn: cn=Domain Admins,ou=Groups,dc=abmas,dc=biz
dn: cn=Domain Users,ou=Groups,dc=abmas,dc=biz
dn: cn=Domain Guests,ou=Groups,dc=abmas,dc=biz
dn: cn=Domain Computers,ou=Groups,dc=abmas,dc=biz
dn: cn=Administrators,ou=Groups,dc=abmas,dc=biz
dn: cn=Print Operators,ou=Groups,dc=abmas,dc=biz
dn: cn=Backup Operators,ou=Groups,dc=abmas,dc=biz
dn: cn=Replicators,ou=Groups,dc=abmas,dc=biz
</screen>
                        The first line is the DIT entry point for the container for POSIX groups. The correct entry
                        for the <filename>/etc/ldap.conf</filename> for the <constant>nss_base_group</constant>
                        parameter therefore is the distinguished name (dn) as applied here:
<screen>
nss_base_group ou=Groups,dc=abmas,dc=biz?one
</screen>
                        The same process may be followed to determine the appropriate dn for user accounts.
                        If the container for computer accounts is not the same as that for users (see the &smb.conf;
                        file entry for <constant>ldap machine suffix</constant>), it may be necessary to set the 
                        following DIT dn in the <filename>/etc/ldap.conf</filename> file:
<screen>
nss_base_passwd dc=abmas,dc=biz?sub
</screen>
                        This instructs LDAP to search for machine as well as user entries from the top of the DIT
                        down. This is inefficient, but at least should work. Note: It is possible to specify multiple
                        <constant>nss_base_passwd</constant> entries in the <filename>/etc/ldap.conf</filename> file; they
                        will be evaluated sequentially. Let us consider an example of use where the following DIT
                        has been implemented:
                        </para>

                        <para>
                        <itemizedlist>
                        <listitem><para>User accounts are stored under the DIT: ou=Users, dc=abmas, dc=biz</para></listitem>
                        <listitem><para>User login accounts are under the DIT: ou=People, ou-Users, dc=abmas, dc=biz</para></listitem>
                        <listitem><para>Computer accounts are under the DIT: ou=Computers, ou=Users, dc=abmas, dc=biz</para></listitem>
                        </itemizedlist>
                        </para>

                        <para>
                        The appropriate multiple entry for the <constant>nss_base_passwd</constant> directive
                        in the <filename>/etc/ldap.conf</filename> file may be:
<screen>
nss_base_passwd ou=People,ou=Users,dc=abmas,dc=org?one
nss_base_passwd ou=Computers,ou=Users,dc=abmas,dc=org?one
</screen>
                        </para></step>

                        <step><para>
                        Perform lookups such as:
<screen>
&rootprompt; getent passwd
</screen>
                        Each such lookup will create an entry in the <filename>/data/log</filename> directory
                        for each such process executed. The contents of each file created in this directory
                        may provide a hint as to the cause of the a problem that is under investigation. 
                        </para></step>

                        <step><para>
                        For additional diagnostic information, check the contents of the <filename>/var/log/messages</filename>
                        to see what error messages are being generated as a result of the LDAP lookups. Here is an example of
                        a successful lookup:
<screen>
slapd[12164]: conn=0 fd=10 ACCEPT from IP=127.0.0.1:33539
(IP=0.0.0.0:389)
slapd[12164]: conn=0 op=0 BIND dn="" method=128
slapd[12164]: conn=0 op=0 RESULT tag=97 err=0 text=
slapd[12164]: conn=0 op=1 SRCH base="" scope=0 deref=0
filter="(objectClass=*)"
slapd[12164]: conn=0 op=1 SEARCH RESULT tag=101 err=0
nentries=1 text=
slapd[12164]: conn=0 op=2 UNBIND
slapd[12164]: conn=0 fd=10 closed
slapd[12164]: conn=1 fd=10 ACCEPT from
IP=127.0.0.1:33540 (IP=0.0.0.0:389)
slapd[12164]: conn=1 op=0 BIND
dn="cn=Manager,dc=abmas,dc=biz" method=128
slapd[12164]: conn=1 op=0 BIND
dn="cn=Manager,dc=abmas,dc=biz" mech=SIMPLE ssf=0
slapd[12164]: conn=1 op=0 RESULT tag=97 err=0 text=
slapd[12164]: conn=1 op=1 SRCH
base="ou=People,dc=abmas,dc=biz" scope=1 deref=0
filter="(objectClass=posixAccount)"
slapd[12164]: conn=1 op=1 SRCH attr=uid userPassword
uidNumber gidNumber cn
homeDirectory loginShell gecos description objectClass
slapd[12164]: conn=1 op=1 SEARCH RESULT tag=101 err=0
nentries=2 text=
slapd[12164]: conn=1 fd=10 closed

</screen>
                        </para></step>

                        <step><para>
                        Check that the bindpw entry in the <filename>/etc/ldap.conf</filename> or in the
                        <filename>/etc/ldap.secrets</filename> file is correct, as specified in the
                        <filename>/etc/openldap/slapd.conf</filename> file.
                        </para></step>

                </procedure>

                </sect4>

                <sect4>
                <title>Debugging Samba</title>

                <para>
                The following parameters in the &smb.conf; file can be useful in tracking down Samba-related problems:
<screen>
[global]
        ...
        log level = 5
        log file = /var/log/samba/%m.log
        max log size = 0
        ...
</screen>
                This will result in the creation of a separate log file for every client from which connections
                are made. The log file will be quite verbose and will grow continually. Do not forget to
                change these lines to the following when debugging has been completed:
<screen>
[global]
        ...
        log level = 1
        log file = /var/log/samba/%m.log
        max log size = 50
        ...
</screen>
                </para>

                <para>
                The log file can be analyzed by executing:
<screen>
&rootprompt; cd /var/log/samba
&rootprompt; grep -v "^\[200" machine_name.log
</screen>
                </para>

                <para>
                Search for hints of what may have failed by looking for the words <emphasis>fail</emphasis>
                and <emphasis>error</emphasis>.
                </para>

                </sect4>

                <sect4>
                <title>Debugging on the Windows Client</title>

                <para>
                MS Windows 2000 Professional and Windows  XP Professional clients can be configured
                to create a netlogon.log file that can be very helpful in diagnosing network logon problems. Search
                the Microsoft knowledge base for detailed instructions. The techniques vary a little with each
                version of MS Windows.
                </para>

                </sect4>

                </sect3>

        </sect2>


        <sect2>
                <title>Political Issues</title>

                <para>
                MS Windows network users are generally very sensitive to limits that may be imposed when 
                confronted with locked-down workstation configurations. The challenge you face must 
                be promoted as a choice between reliable, fast network operation and a constant flux    
                of problems that result in user irritation.
                </para>

        </sect2>

        <sect2>
                <title>Installation Checklist</title>

        <para>
        You are starting a complex project. Even though you went through the installation of a complex
        network in <link linkend="Big500users"/>, this network is a bigger challenge because of the
        large number of complex applications that must be configured before the first few steps
        can be validated. Take stock of what you are about to undertake, prepare yourself, and
        frequently review the steps ahead while making at least a mental note of what has already
        been completed. The following task list may help you to keep track of the task items
        that are covered:
        </para>


        <itemizedlist>
                <listitem><para>Samba-3 PDC Server Configuration</para>
                        <orderedlist>
                                <listitem><para>DHCP and DNS servers</para></listitem>
                                <listitem><para>OpenLDAP server</para></listitem>
                                <listitem><para>PAM and NSS client tools</para></listitem>
                                <listitem><para>Samba-3 PDC</para></listitem>
                                <listitem><para>Idealx smbldap scripts</para></listitem>
                                <listitem><para>LDAP initialization</para></listitem>
                                <listitem><para>Create user and group accounts</para></listitem>
                                <listitem><para>Printers</para></listitem>
                                <listitem><para>Share point directory roots</para></listitem>
                                <listitem><para>Profile directories</para></listitem>
                                <listitem><para>Logon scripts</para></listitem>
                                <listitem><para>Configuration of user rights and privileges</para></listitem>
                        </orderedlist>
                </listitem>
                <listitem><para>Samba-3 BDC Server Configuration</para>
                        <orderedlist>
                                <listitem><para>DHCP and DNS servers</para></listitem>
                                <listitem><para>PAM and NSS client tools</para></listitem>
                                <listitem><para>Printers</para></listitem>
                                <listitem><para>Share point directory roots</para></listitem>
                                <listitem><para>Profiles directories</para></listitem>
                        </orderedlist>
                </listitem>
                <listitem><para>Windows XP Client Configuration</para>
                        <orderedlist>
                                <listitem><para>Default profile folder redirection</para></listitem>
                                <listitem><para>MS Outlook PST file relocation</para></listitem>
                                <listitem><para>Delete roaming profile on logout</para></listitem>
                                <listitem><para>Upload printer drivers to Samba servers</para></listitem>
                                <listitem><para>Install software</para></listitem>
                                <listitem><para>Creation of roll-out images</para></listitem>
                        </orderedlist>
                </listitem>
        </itemizedlist>


        </sect2>

</sect1>

<sect1>
        <title>Samba Server Implementation</title>

        <para>
        <indexterm><primary>file servers</primary></indexterm>
        <indexterm><primary>BDC</primary></indexterm>
        The network design shown in <link linkend="chap6net"/> is not comprehensive. It is assumed
        that you will install additional file servers and possibly additional BDCs.
        </para>

        <figure id="chap6net">
                <title>Network Topology &smbmdash; 500 User Network Using ldapsam passdb backend</title>
                <imagefile scale="50">chap6-net</imagefile>
        </figure>

        <para>
        <indexterm><primary>SUSE Linux</primary></indexterm>
        <indexterm><primary>Red Hat Linux</primary></indexterm>
        All configuration files and locations are shown for SUSE Linux 9.2 and are equally valid for SUSE
        Linux Enterprise Server 9. The file locations for Red Hat Linux are similar. You may need to
        adjust the locations for your particular Linux system distribution/implementation.
        </para>

<note><para>
The following information applies to Samba-3.0.20 when used with the Idealx smbldap-tools
scripts version 0.9.1. If using a different version of Samba or of the smbldap-tools tarball,
please verify that the versions you are about to use are matching. The smbldap-tools package
uses counter-entries in the LDAP directory to avoid duplication of the UIDs and GIDs that are
issued for POSIX accounts. The LDAP rdn under which this information is stored are called
<constant>uidNumber</constant> and <constant>gidNumber</constant> respectively. These may be
located in any convenient part of the directory information tree (DIT). In the examples that
follow they have been located under <constant>dn=sambaDomainName=MEGANET2,dc=abmas,dc=org</constant>.
They could just as well be located under the rdn <constant>cn=NextFreeUnixId</constant>.
</para></note>

        <para>
        The steps in the process involve changes from the network configuration shown in
        <link linkend="Big500users"/>.  Before implementing the following steps, you must
        have completed the network implementation shown in that chapter. If you are starting
        with newly installed Linux servers, you must complete the steps shown in
        <link linkend="ch5-dnshcp-setup"/> before commencing at <link linkend="ldapsetup"/>.
        </para>

        <sect2 id="ldapsetup">
        <title>OpenLDAP Server Configuration</title>

        <para>
        <indexterm><primary>nss_ldap</primary></indexterm>
        <indexterm><primary>pam_ldap</primary></indexterm>
        <indexterm><primary>openldap</primary></indexterm>
        Confirm that the packages shown in <link linkend="oldapreq"/> are installed on your system.
        </para>

        <table id="oldapreq">
                <title>Required OpenLDAP Linux Packages</title>
                <tgroup cols="3">
                        <colspec align="left"/>
                        <colspec align="left"/>
                        <colspec align="left"/>
                        <thead>
                                <row>
                                        <entry align="center">SUSE Linux 8.x</entry>
                                        <entry align="center">SUSE Linux 9.x</entry>
                                        <entry align="center">Red Hat Linux</entry>
                                </row>
                        </thead>
                        <tbody>
                                <row>
                                        <entry>nss_ldap</entry>
                                        <entry>nss_ldap</entry>
                                        <entry>nss_ldap</entry>
                                </row>
                                <row>
                                        <entry>pam_ldap</entry>
                                        <entry>pam_ldap</entry>
                                        <entry>pam_ldap</entry>
                                </row>
                                <row>
                                        <entry>openldap2</entry>
                                        <entry>openldap2</entry>
                                        <entry>openldap</entry>
                                </row>
                                <row>
                                        <entry>openldap2-client</entry>
                                        <entry>openldap2-client</entry>
                                        <entry></entry>
                                </row>
                        </tbody>
                </tgroup>
        </table>

        <para>
        Samba-3 and OpenLDAP will have a degree of interdependence that is unavoidable. The method
        for bootstrapping the LDAP and Samba-3 configuration is relatively straightforward. If you
        follow these guidelines, the resulting system should work fine.
        </para>

        <procedure>
        <title>OpenLDAP Server Configuration Steps</title>

                <step><para>
                <indexterm><primary>/etc/openldap/slapd.conf</primary></indexterm>
                Install the file shown in <link linkend="sbehap-slapdconf"/> in the directory
                <filename>/etc/openldap</filename>.
                </para></step>

                <step><para>
                <indexterm><primary>/data/ldap</primary></indexterm>
                <indexterm><primary>group account</primary></indexterm>
                <indexterm><primary>user account</primary></indexterm>
                Remove all files from the directory <filename>/data/ldap</filename>, making certain that
                the directory exists with permissions:
<screen>
&rootprompt; ls -al /data | grep ldap
drwx------   2 ldap    ldap       48 Dec 15 22:11 ldap
</screen>
                This may require you to add a user and a group account for LDAP if they do not exist.
                </para></step>

                <step><para>
                <indexterm><primary>DB_CONFIG</primary></indexterm>
                Install the file shown in <link linkend="sbehap-dbconf"/> in the directory
                <filename>/data/ldap</filename>. In the event that this file is added after <constant>ldap</constant>
                has been started, it is possible to cause the new settings to take effect by shutting down
                the <constant>LDAP</constant> server, executing the <command>db_recover</command> command inside the
                <filename>/data/ldap</filename> directory, and then restarting the <constant>LDAP</constant> server.
                </para></step>

                <step><para>
                <indexterm><primary>syslog</primary></indexterm>
                Performance logging can be enabled and should preferably be sent to a file on
                a file system that is large enough to handle significantly sized logs. To enable
                the logging at a verbose level to permit detailed analysis, uncomment the entry in
                the <filename>/etc/openldap/slapd.conf</filename> shown as <quote>loglevel 256</quote>.
                </para>

                <para>
                Edit the <filename>/etc/syslog.conf</filename> file to add the following at the end
                of the file:
<screen>
local4.*        -/data/ldap/log/openldap.log
</screen>
                Note: The path <filename>/data/ldap/log</filename> should be set at a location
                that is convenient and that can store a large volume of data.
                </para></step>

        </procedure>

<example id="sbehap-dbconf">
<title>LDAP DB_CONFIG File</title>
<screen>
set_cachesize           0 150000000 1
set_lg_regionmax        262144
set_lg_bsize            2097152
#set_lg_dir             /var/log/bdb
set_flags               DB_LOG_AUTOREMOVE
</screen>
</example>

<example id="sbehap-slapdconf">
<title>LDAP Master Configuration File &smbmdash; <filename>/etc/openldap/slapd.conf</filename> Part A</title>
<screen>
include         /etc/openldap/schema/core.schema
include         /etc/openldap/schema/cosine.schema
include         /etc/openldap/schema/inetorgperson.schema
include         /etc/openldap/schema/nis.schema
include         /etc/openldap/schema/samba3.schema

pidfile         /var/run/slapd/slapd.pid
argsfile        /var/run/slapd/slapd.args

access to dn.base=""
                by self write
                by * auth

access to attr=userPassword
                by self write
                by * auth

access to attr=shadowLastChange
                by self write
                by * read

access to *
                by * read
                by anonymous auth

#loglevel       256

schemacheck     on
idletimeout     30
backend         bdb
database        bdb
checkpoint      1024 5
cachesize       10000

suffix          "dc=abmas,dc=biz"
rootdn          "cn=Manager,dc=abmas,dc=biz"

# rootpw = not24get
rootpw          {SSHA}86kTavd9Dw3FAz6qzWTrCOKX/c0Qe+UV

directory       /data/ldap
</screen>
</example>

<example id="sbehap-slapdconf2">
<title>LDAP Master Configuration File &smbmdash; <filename>/etc/openldap/slapd.conf</filename> Part B</title>
<screen>
# Indices to maintain
index objectClass           eq
index cn                    pres,sub,eq
index sn                    pres,sub,eq
index uid                   pres,sub,eq
index displayName           pres,sub,eq
index uidNumber             eq
index gidNumber             eq
index memberUID             eq
index sambaSID              eq
index sambaPrimaryGroupSID  eq
index sambaDomainName       eq
index default               sub
</screen>
</example>

        </sect2>

        <sect2 id="sbehap-PAM-NSS">
        <title>PAM and NSS Client Configuration</title>

        <para>
        <indexterm><primary>LDAP</primary></indexterm>
        <indexterm><primary>NSS</primary></indexterm>
        <indexterm><primary>PAM</primary></indexterm>
        The steps that follow involve configuration of LDAP, NSS LDAP-based resolution of users and
        groups. Also, so that LDAP-based accounts can log onto the system, the steps ahead configure
        the Pluggable Authentication Modules (PAM) to permit LDAP-based authentication.
        </para>

        <para>
        <indexterm><primary>Pluggable Authentication Modules</primary><see>PAM</see></indexterm>
        <indexterm><primary>pam_unix2.so</primary></indexterm>
        Since you have chosen to put UNIX user and group accounts into the LDAP database, it is likely
        that you may want to use them for UNIX system (Linux) local machine logons. This necessitates
        correct configuration of PAM. The <command>pam_ldap</command> open source package provides the
        PAM modules that most people would use. On SUSE Linux systems, the <command>pam_unix2.so</command>
        module also has the ability to redirect authentication requests through LDAP.
        </para>

        <para>
        <indexterm><primary>YaST</primary></indexterm>
        <indexterm><primary>SUSE Linux</primary></indexterm>
        <indexterm><primary>Red Hat Linux</primary></indexterm>
        <indexterm><primary>authconfig</primary></indexterm>
        You have chosen to configure these services by directly editing the system files, but of course, you
        know that this configuration can be done using system tools provided by the Linux system vendor.
        SUSE Linux has a facility in YaST (the system admin tool) through <menuchoice><guimenu>yast</guimenu>
        <guimenuitem>system</guimenuitem><guimenuitem>ldap-client</guimenuitem></menuchoice> that permits
        configuration of SUSE Linux as an LDAP client. Red Hat Linux provides the <command>authconfig</command>
        tool for this.
        </para>

        <procedure>
        <title>PAM and NSS Client Configuration Steps</title>

                <step><para>
                <indexterm><primary>/lib/libnss_ldap.so.2</primary></indexterm>
                <indexterm><primary>/etc/ldap.conf</primary></indexterm>
                <indexterm><primary>nss_ldap</primary></indexterm>
                Execute the following command to find where the <filename>nss_ldap</filename> module
                expects to find its control file:
<screen>
&rootprompt; strings /lib/libnss_ldap.so.2 | grep conf
</screen>
                The preferred and usual location is <filename>/etc/ldap.conf</filename>.
                </para></step>

                <step><para>
                On the server <constant>MASSIVE</constant>, install the file shown in 
                <link linkend="sbehap-nss01"/> into the path that was obtained from the step above.
                On the servers called <constant>BLDG1</constant> and <constant>BLDG2</constant>, install the file shown in
                <link linkend="sbehap-nss02"/> into the path that was obtained from the step above.
                </para></step>

<example id="sbehap-nss01">
<title>Configuration File for NSS LDAP Support &smbmdash; <filename>/etc/ldap.conf</filename></title>
<screen>
host 127.0.0.1

base dc=abmas,dc=biz

binddn cn=Manager,dc=abmas,dc=biz
bindpw not24get

timelimit 50
bind_timelimit 50
bind_policy hard

idle_timelimit 3600

pam_password exop

nss_base_passwd ou=People,dc=abmas,dc=biz?one
nss_base_shadow ou=People,dc=abmas,dc=biz?one
nss_base_group  ou=Groups,dc=abmas,dc=biz?one

ssl off
</screen>
</example>

<example id="sbehap-nss02">
<title>Configuration File for NSS LDAP Clients Support &smbmdash; <filename>/etc/ldap.conf</filename></title>
<screen>
host 172.16.0.1

base dc=abmas,dc=biz

binddn cn=Manager,dc=abmas,dc=biz
bindpw not24get

timelimit 50
bind_timelimit 50
bind_policy hard

idle_timelimit 3600

pam_password exop

nss_base_passwd ou=People,dc=abmas,dc=biz?one
nss_base_shadow ou=People,dc=abmas,dc=biz?one
nss_base_group  ou=Groups,dc=abmas,dc=biz?one

ssl off
</screen>
</example>

                <step><para>
                <indexterm><primary>/etc/nsswitch.conf</primary></indexterm>
                Edit the NSS control file (<filename>/etc/nsswitch.conf</filename>) so that the lines that
                control user and group resolution will obtain information from the normal system files as
                well as from <command>ldap</command>:
<screen>
passwd: files ldap
shadow: files ldap
group:  files ldap
hosts:  files dns wins
</screen>
                Later, when the LDAP database has been initialized and user and group accounts have been
                added, you can validate resolution of the LDAP resolver process. The inclusion of 
                WINS-based hostname resolution is deliberate so that all MS Windows client hostnames can be 
                resolved to their IP addresses, whether or not they are DHCP clients.
                </para>

                <note><para>
                Some Linux systems (Novell SUSE Linux in particular) add entries to the <filename>nsswitch.conf</filename>
                file that may cause operational problems with the configuration methods adopted in this book. It is
                advisable to comment out the entries <constant>passwd_compat</constant> and <constant>group_compat</constant>
                where they are found in this file.
                </para></note>

                <para>
                Even at the risk of overstating the issue, incorrect and inappropriate configuration of the
                <filename>nsswitch.conf</filename> file is a significant cause of operational problems with LDAP.
                </para></step>

                <step><para>
                <indexterm><primary>pam_unix2.so</primary><secondary>use_ldap</secondary></indexterm>
                For PAM LDAP configuration on this SUSE Linux 9.0 system, the simplest solution is to edit the following
                files in the <filename>/etc/pam.d</filename> directory: <command>login</command>, <command>password</command>,
                <command>samba</command>, <command>sshd</command>.  In each file, locate every entry that has the
                <command>pam_unix2.so</command> entry and add to the line the entry <command>use_ldap</command> as shown
                for the <command>login</command> module in this example:
<screen>
#%PAM-1.0
auth      requisite  pam_unix2.so   nullok use_ldap #set_secrpc
auth      required   pam_securetty.so
auth      required   pam_nologin.so
#auth     required   pam_homecheck.so
auth      required   pam_env.so
auth      required   pam_mail.so
account   required   pam_unix2.so   use_ldap
password  required   pam_pwcheck.s  nullok
password  required   pam_unix2.so   nullok use_first_pass \
                                    use_authtok use_ldap
session   required   pam_unix2.so   none use_ldap # debug or trace
session   required   pam_limits.so
</screen>
                </para>

                <para>
                <indexterm><primary>pam_ldap.so</primary></indexterm>
                On other Linux systems that do not have an LDAP-enabled <command>pam_unix2.so</command> module,
                you must edit these files by adding the <command>pam_ldap.so</command> modules as shown here:
<screen>
#%PAM-1.0
auth     required    pam_securetty.so
auth     required    pam_nologin.so
auth     sufficient  pam_ldap.so
auth     required    pam_unix2.so   nullok try_first_pass #set_secrpc
account  sufficient  pam_ldap.so
account  required    pam_unix2.so
password required    pam_pwcheck.so nullok
password required    pam_ldap.so    use_first_pass use_authtok
password required    pam_unix2.so   nullok use_first_pass use_authtok
session  required    pam_unix2.so   none # debug or trace
session  required    pam_limits.so
session  required    pam_env.so
session  optional    pam_mail.so
</screen>
                This example does have the LDAP-enabled <command>pam_unix2.so</command>, but simply
                demonstrates the use of the <command>pam_ldap.so</command> module. You can use either
                implementation, but if the <command>pam_unix2.so</command> on your system supports
                LDAP, you probably want to use it rather than add an additional module.
                </para></step>

        </procedure>

        </sect2>

        <sect2 id="sbehap-massive">
        <title>Samba-3 PDC Configuration</title>

        <para>
        <indexterm><primary>Samba RPM Packages</primary></indexterm>
        Verify that the Samba-3.0.20 (or later) packages are installed on each SUSE Linux server 
        before following the steps below. If Samba-3.0.20 (or later) is not installed, you have the
        choice to either build your own or obtain the packages from a dependable source.
        Packages for SUSE Linux 8.x, 9.x, and SUSE Linux Enterprise Server 9, as well as for 
        Red Hat Fedora Core and Red Hat Enterprise Linux Server 3 and 4, are included on the CD-ROM that
        is included with this book.
        </para>

        <procedure>
        <title>Configuration of PDC Called <constant>MASSIVE</constant></title>

                <step><para>
                Install the files in <link linkend="sbehap-massive-smbconfa"/>, 
                <link linkend="sbehap-massive-smbconfb"/>, <link linkend="sbehap-shareconfa"/>, 
                and <link linkend="sbehap-shareconfb"/> into the <filename>/etc/samba/</filename> 
                directory. The three files should be added together to form the &smb.conf; 
                master file. It is a good practice to call this file something like
                <filename>smb.conf.master</filename> and then to perform all file edits
                on the master file. The operational &smb.conf; is then generated as shown in
                the next step.
                </para></step>

                <step><para>
                <indexterm><primary>testparm</primary></indexterm>
                Create and verify the contents of the &smb.conf; file that is generated by:
<screen>
&rootprompt; testparm -s smb.conf.master &gt; smb.conf
</screen>
                Immediately follow this with the following:
<screen>
&rootprompt; testparm
</screen>
                The output that is created should be free from errors, as shown here:

<screen>
Load smb config files from /etc/samba/smb.conf
Processing section "[accounts]"
Processing section "[service]"
Processing section "[pidata]"
Processing section "[homes]"
Processing section "[printers]"
Processing section "[apps]"
Processing section "[netlogon]"
Processing section "[profiles]"
Processing section "[profdata]"
Processing section "[print$]"
Loaded services file OK.
Server role: ROLE_DOMAIN_PDC
Press enter to see a dump of your service definitions
</screen>
                </para></step>
                
                <step><para>
                Delete all runtime files from prior Samba operation by executing (for SUSE
                Linux):
<screen>
&rootprompt; rm /etc/samba/*tdb
&rootprompt; rm /var/lib/samba/*tdb
&rootprompt; rm /var/lib/samba/*dat
&rootprompt; rm /var/log/samba/*
</screen>
                </para></step>

                <step><para>
                <indexterm><primary>secrets.tdb</primary></indexterm>
                <indexterm><primary>smbpasswd</primary></indexterm>
                Samba-3 communicates with the LDAP server. The password that it uses to
                authenticate to the LDAP server must be stored in the <filename>secrets.tdb</filename>
                file. Execute the following to create the new <filename>secrets.tdb</filename> files
                and store the password for the LDAP Manager:
<screen>
&rootprompt; smbpasswd -w not24get
</screen>
                The expected output from this command is:
<screen>
Setting stored password for "cn=Manager,dc=abmas,dc=biz" in secrets.tdb
</screen>
                </para></step>

                <step><para>
                <indexterm><primary>smbd</primary></indexterm>
                <indexterm><primary>net</primary><secondary>getlocalsid</secondary></indexterm>
                Samba-3 generates a Windows Security Identifier (SID) only when <command>smbd</command>
                has been started. For this reason, you start Samba. After a few seconds delay,
                execute:
<screen>
&rootprompt; smbclient -L localhost -U%
&rootprompt; net getlocalsid
</screen>
                A report such as the following means that the domain SID has not yet
                been written to the <filename>secrets.tdb</filename> or to the LDAP backend:
<screen>
[2005/03/03 23:19:34, 0] lib/smbldap.c:smbldap_connect_system(852)
  failed to bind to server ldap://massive.abmas.biz
with dn="cn=Manager,dc=abmas,dc=biz" Error: Can't contact LDAP server
        (unknown)
[2005/03/03 23:19:48, 0] lib/smbldap.c:smbldap_search_suffix(1169)
  smbldap_search_suffix: Problem during the LDAP search:
        (unknown) (Timed out)
</screen>
                The attempt to read the SID will cause and attempted bind to the LDAP server. Because the LDAP server
                is not running, this operation will fail by way of a timeout, as shown previously. This is
                normal output; do not worry about this error message.  When the domain has been created and
                written to the <filename>secrets.tdb</filename> file, the output should look like this:
<screen>
SID for domain MASSIVE is: S-1-5-21-3504140859-1010554828-2431957765
</screen>
                If, after a short delay (a few seconds), the domain SID has still not been written to 
                the <filename>secrets.tdb</filename> file, it is necessary to investigate what 
                may be misconfigured. In this case, carefully check the &smb.conf; file for typographical 
                errors (the most common problem).  The use of the <command>testparm</command> is highly 
                recommended to validate the contents of this file.
                </para></step>

                <step><para>
                When a positive domain SID has been reported, stop Samba.
                </para></step>

                <step><para>
                <indexterm><primary>NFS server</primary></indexterm>
                <indexterm><primary>/etc/exports</primary></indexterm>
                <indexterm><primary>BDC</primary></indexterm>
                <indexterm><primary>rsync</primary></indexterm>
                Configure the NFS server for your Linux system. So you can complete the steps that
                follow, enter into the <filename>/etc/exports</filename> the following entry:
<screen>
/home   *(rw,root_squash,sync)
</screen>
                This permits the user home directories to be used on the BDC servers for testing
                purposes. You, of course, decide what is the best way for your site to distribute
                data drives, and you create suitable backup and restore procedures for Abmas
                I'd strongly recommend that for normal operation the BDC is completely independent 
                of the PDC. rsync is a useful tool here, as it resembles the NT replication service quite 
                closely. If you do use NFS, do not forget to start the NFS server as follows:
<screen>
&rootprompt; rcnfsserver start
</screen>
                </para></step>
        </procedure>

        <para>
        Your Samba-3 PDC is now ready to communicate with the LDAP password backend. Let's get on with
        configuration of the LDAP server.
        </para>

<example id="sbehap-massive-smbconfa">
<title>LDAP Based &smb.conf; File, Server: MASSIVE &smbmdash; global Section: Part A</title>
<smbconfblock>
<smbconfcomment>Global parameters</smbconfcomment>
<smbconfsection name="[global]"/>
        <smbconfoption name="unix charset">LOCALE</smbconfoption>
        <smbconfoption name="workgroup">MEGANET2</smbconfoption>
        <smbconfoption name="netbios name">MASSIVE</smbconfoption>
        <smbconfoption name="interfaces">eth1, lo</smbconfoption>
        <smbconfoption name="bind interfaces only">Yes</smbconfoption>
        <smbconfoption name="passdb backend">ldapsam:ldap://massive.abmas.biz</smbconfoption>
        <smbconfoption name="enable privileges">Yes</smbconfoption>
        <smbconfoption name="username map">/etc/samba/smbusers</smbconfoption>
        <smbconfoption name="log level">1</smbconfoption>
        <smbconfoption name="syslog">0</smbconfoption>
        <smbconfoption name="log file">/var/log/samba/%m</smbconfoption>
        <smbconfoption name="max log size">50</smbconfoption>
        <smbconfoption name="smb ports">139</smbconfoption>
        <smbconfoption name="name resolve order">wins bcast hosts</smbconfoption>
        <smbconfoption name="time server">Yes</smbconfoption>
        <smbconfoption name="printcap name">CUPS</smbconfoption>
        <smbconfoption name="show add printer wizard">No</smbconfoption>
        <smbconfoption name="add user script">/opt/IDEALX/sbin/smbldap-useradd -m "%u"</smbconfoption>
        <smbconfoption name="delete user script">/opt/IDEALX/sbin/smbldap-userdel "%u"</smbconfoption>
        <smbconfoption name="add group script">/opt/IDEALX/sbin/smbldap-groupadd -p "%g"</smbconfoption>
        <smbconfoption name="delete group script">/opt/IDEALX/sbin/smbldap-groupdel "%g"</smbconfoption>
        <smbconfoption name="add user to group script">/opt/IDEALX/sbin/smbldap-groupmod -m "%u" "%g"</smbconfoption>
        <smbconfoption name="delete user from group script">/opt/IDEALX/sbin/smbldap-groupmod -x "%u" "%g"</smbconfoption>
        <smbconfoption name="set primary group script">/opt/IDEALX/sbin/smbldap-usermod -g "%g" "%u"</smbconfoption>
        <smbconfoption name="add machine script">/opt/IDEALX/sbin/smbldap-useradd -w "%u"</smbconfoption>
</smbconfblock>
</example>

<example id="sbehap-massive-smbconfb">
<title>LDAP Based &smb.conf; File, Server: MASSIVE &smbmdash; global Section: Part B</title>
<smbconfblock>
        <smbconfoption name="logon script">scripts\logon.bat</smbconfoption>
        <smbconfoption name="logon path">\\%L\profiles\%U</smbconfoption>
        <smbconfoption name="logon drive">X:</smbconfoption>
        <smbconfoption name="domain logons">Yes</smbconfoption>
        <smbconfoption name="preferred master">Yes</smbconfoption>
        <smbconfoption name="wins support">Yes</smbconfoption>
        <smbconfoption name="ldap suffix">dc=abmas,dc=biz</smbconfoption>
        <smbconfoption name="ldap machine suffix">ou=People</smbconfoption>
        <smbconfoption name="ldap user suffix">ou=People</smbconfoption>
        <smbconfoption name="ldap group suffix">ou=Groups</smbconfoption>
        <smbconfoption name="ldap idmap suffix">ou=Idmap</smbconfoption>
        <smbconfoption name="ldap admin dn">cn=Manager,dc=abmas,dc=biz</smbconfoption>
        <smbconfoption name="idmap backend">ldap:ldap://massive.abmas.biz</smbconfoption>
        <smbconfoption name="idmap uid">10000-20000</smbconfoption>
        <smbconfoption name="idmap gid">10000-20000</smbconfoption>
        <smbconfoption name="map acl inherit">Yes</smbconfoption>
        <smbconfoption name="printing">cups</smbconfoption>
        <smbconfoption name="printer admin">root, chrisr</smbconfoption>
</smbconfblock>
</example>

        </sect2>


        <sect2 id="sbeidealx">
        <title>Install and Configure Idealx smbldap-tools Scripts</title>

        <para>
        <indexterm><primary>Idealx</primary><secondary>smbldap-tools</secondary></indexterm>
        The Idealx scripts, or equivalent, are necessary to permit Samba-3 to manage accounts
        on the LDAP server. You have chosen the Idealx scripts because they are the best-known
        LDAP configuration scripts. The use of these scripts will help avoid the necessity
        to create custom scripts. It is easy to download them from the Idealx
        <ulink url="http://samba.idealx.org/index.en.html">Web site</ulink>. The tarball may
        be directly <ulink url="http://samba.idealx.org/dist/smbldap-tools-0.9.1.tgz">downloaded</ulink>
        from this site also. Alternatively, you may obtain the 
        <ulink url="http://samba.idealx.org/dist/smbldap-tools-0.9.1-1.src.rpm">smbldap-tools-0.9.1-1.src.rpm</ulink>
        file that may be used to build an installable RPM package for your Linux system.
        </para>

<note><para>
The smbldap-tools scripts can be installed in any convenient directory of your choice, in which case you must
change the path to them in your &smb.conf; file on the PDC (<constant>MASSIVE</constant>).
</para></note>

        <para>
        The smbldap-tools are located in <filename>/opt/IDEALX/sbin</filename>.
        The scripts are not needed on BDC machines because all LDAP updates are handled by
        the PDC alone.
        </para>

        <sect3>
        <title>Installation of smbldap-tools from the Tarball</title>

        <para>
        To perform a manual installation of the smbldap-tools scripts, the following procedure may be used:
        </para>

        <procedure id="idealxscript">
        <title>Unpacking and Installation Steps for the <constant>smbldap-tools</constant> Tarball</title>

                <step><para>
                Create the <filename>/opt/IDEALX/sbin</filename> directory, and set its permissions
                and ownership as shown here:
<screen>
&rootprompt; mkdir -p /opt/IDEALX/sbin
&rootprompt; chown root:root /opt/IDEALX/sbin
&rootprompt; chmod 755 /opt/IDEALX/sbin
&rootprompt; mkdir -p /etc/smbldap-tools
&rootprompt; chown root:root /etc/smbldap-tools
&rootprompt; chmod 755 /etc/smbldap-tools
</screen>
                </para></step>

                <step><para>
                If you wish to use the downloaded tarball, unpack the smbldap-tools in a suitable temporary location.
                Change into either the directory extracted from the tarball or the smbldap-tools
                directory in your <filename>/usr/share/doc/packages</filename> directory tree.
                </para></step>

                <step><para>
                Copy all the <filename>smbldap-*</filename> and the <filename>configure.pl</filename> files into the 
                <filename>/opt/IDEALX/sbin</filename> directory, as shown here:
<screen>
&rootprompt; cd smbldap-tools-0.9.1/
&rootprompt; cp smbldap-* configure.pl *pm /opt/IDEALX/sbin/
&rootprompt; cp smbldap*conf /etc/smbldap-tools/
&rootprompt; chmod 750 /opt/IDEALX/sbin/smbldap-*
&rootprompt; chmod 750 /opt/IDEALX/sbin/configure.pl
&rootprompt; chmod 640 /etc/smbldap-tools/smbldap.conf
&rootprompt; chmod 600 /etc/smbldap-tools/smbldap_bind.conf
</screen>
                </para></step>

                <step><para>
                The smbldap-tools scripts master control file must now be configured.
                Change to the <filename>/opt/IDEALX/sbin</filename> directory, then edit the
                <filename>smbldap_tools.pm</filename> to affect the changes
                shown here:
<screen>
...
# ugly funcs using global variables and spawning openldap clients

my $smbldap_conf="/etc/smbldap-tools/smbldap.conf";
my $smbldap_bind_conf="/etc/smbldap-tools/smbldap_bind.conf";
...
</screen>
                </para></step>

                <step><para>
                To complete the configuration of the smbldap-tools, set the permissions and ownership
                by executing the following commands:
<screen>
&rootprompt; chown root:root /opt/IDEALX/sbin/* 
&rootprompt; chmod 755 /opt/IDEALX/sbin/smbldap-*
&rootprompt; chmod 640 /opt/IDEALX/sbin/smb*pm 
</screen>
                The smbldap-tools scripts are now ready for the configuration step outlined in
                <link linkend="smbldap-init"/>.
                </para></step>

        </procedure>

        </sect3>

        <sect3>
        <title>Installing smbldap-tools from the RPM Package</title>

        <para>
        In the event that you have elected to use the RPM package provided by Idealx, download the
        source RPM <filename>smbldap-tools-0.9.1-1.src.rpm</filename>, then follow this procedure:
        </para>

        <procedure>
        <title>Installation Steps for <constant>smbldap-tools</constant> RPM's</title>

                <step><para>
                Install the source RPM that has been downloaded as follows:
<screen>
&rootprompt; rpm -i smbldap-tools-0.9.1-1.src.rpm
</screen>
                </para></step>

                <step><para>
                Change into the directory in which the SPEC files are located. On SUSE Linux:
<screen>
&rootprompt; cd /usr/src/packages/SPECS
</screen>
                On Red Hat Linux systems:
<screen>
&rootprompt; cd /usr/src/redhat/SPECS
</screen>
                </para></step>

                <step><para>
                Edit the <filename>smbldap-tools.spec</filename> file to change the value of the
                <constant>_sysconfig</constant> macro as shown here:
<screen>
%define _prefix /opt/IDEALX
%define _sysconfdir /etc
</screen>
                Note: Any suitable directory can be specified.
                </para></step>

                <step><para>
                Build the package by executing:
<screen>
&rootprompt; rpmbuild -ba -v smbldap-tools.spec
</screen>
                A build process that has completed without error will place the installable binary
                files in the directory <filename>../RPMS/noarch</filename>.
                </para></step>

                <step><para>
                Install the binary package by executing:
<screen>
&rootprompt; rpm -Uvh ../RPMS/noarch/smbldap-tools-0.9.1-1.noarch.rpm
</screen>
                </para></step>

        </procedure>

        <para>
        The Idealx scripts should now be ready for configuration using the steps outlined in
        <link linkend="smbldap-init">Configuration of smbldap-tools</link>.
        </para>

        </sect3>

        <sect3 id="smbldap-init">
        <title>Configuration of smbldap-tools</title>

        <para>
        Prior to use, the smbldap-tools must be configured to match the settings in the &smb.conf; file
        and to match the settings in the <filename>/etc/openldap/slapd.conf</filename> file. The assumption
        is made that the &smb.conf; file has correct contents. The following procedure ensures that
        this is completed correctly:
        </para>

        <para>
        The smbldap-tools require that the NetBIOS name (machine name) of the Samba server be included
        in the &smb.conf; file.
        </para>

        <procedure>
        <title>Configuration Steps for <constant>smbldap-tools</constant> to Enable Use</title>

                <step><para>
                Change into the directory that contains the <filename>configure.pl</filename> script.
<screen>
&rootprompt; cd /opt/IDEALX/sbin
</screen>
                </para></step>

                <step><para>
                Execute the <filename>configure.pl</filename> script as follows:
<screen>
&rootprompt; ./configure.pl
</screen>
                The interactive use of this script for the PDC is demonstrated here:
<screen>
&rootprompt; /opt/IDEALX/sbin/configure.pl 
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
       smbldap-tools script configuration
       -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Before starting, check
 . if your samba controller is up and running.
 . if the domain SID is defined (you can get it with the
                                                    'net getlocalsid')

 . you can leave the configuration using the Crtl-c key combination
 . empty value can be set with the "." character
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Looking for configuration files...

Samba Config File Location [/etc/samba/smb.conf] > 
smbldap-tools configuration file Location (global parameters)
                        [/etc/opt/IDEALX/smbldap-tools/smbldap.conf] > 
smbldap Config file Location (bind parameters) 
                   [/etc/opt/IDEALX/smbldap-tools/smbldap_bind.conf] > 
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Let's start configuring the smbldap-tools scripts ...

. workgroup name: name of the domain Samba act as a PDC
  workgroup name [MEGANET2] > 
. netbios name: netbios name of the samba controler
  netbios name [MASSIVE] > 
. logon drive: local path to which the home directory 
                    will be connected (for NT Workstations). Ex: 'H:'
  logon drive [H:] > 
. logon home: home directory location (for Win95/98 or NT Workstation)
  (use %U as username) Ex:'\\MASSIVE\%U'
  logon home (press the "." character if you don't want homeDirectory)
                                                     [\\MASSIVE\%U] > 
. logon path: directory where roaming profiles are stored. 
                                            Ex:'\\MASSIVE\profiles\%U'
  logon path (press the "." character
               if you don't want roaming profile) [\\%L\profiles\%U] >
. home directory prefix (use %U as username)
                                           [/home/%U] > /data/users/%U
. default users' homeDirectory mode [700] > 
. default user netlogon script (use %U as username)
                                                 [scripts\logon.bat] >
  default password validation time (time in days) [45] > 900
. ldap suffix [dc=abmas,dc=biz] > 
. ldap group suffix [ou=Groups] > 
. ldap user suffix [ou=People,ou=Users] > 
. ldap machine suffix [ou=Computers,ou=Users] > 
. Idmap suffix [ou=Idmap] > 
. sambaUnixIdPooldn: object where you want to store the next uidNumber
  and gidNumber available for new users and groups
  sambaUnixIdPooldn object (relative to ${suffix}) 
                                          [sambaDomainName=MEGANET2] > 
. ldap master server: IP adress or DNS name of the master 
                                                (writable) ldap server
  ldap master server [massive.abmas.biz] > 
. ldap master port [389] > 
. ldap master bind dn [cn=Manager,dc=abmas,dc=biz] > 
. ldap master bind password [] > 
. ldap slave server: IP adress or DNS name of the slave ldap server: 
                                            can also be the master one
  ldap slave server [massive.abmas.biz] > 
. ldap slave port [389] > 
. ldap slave bind dn [cn=Manager,dc=abmas,dc=biz] > 
. ldap slave bind password [] > 
. ldap tls support (1/0) [0] > 
. SID for domain MEGANET2: SID of the domain 
                      (can be obtained with 'net getlocalsid MASSIVE')
  SID for domain MEGANET2
                        [S-1-5-21-3504140859-1010554828-2431957765]] >
. unix password encryption: encryption used for unix passwords
  unix password encryption (CRYPT, MD5, SMD5, SSHA, SHA) [SSHA] > MD5
. default user gidNumber [513] > 
. default computer gidNumber [515] > 
. default login shell [/bin/bash] > 
. default skeleton directory [/etc/skel] > 
. default domain name to append to mail adress [] > abmas.biz
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
backup old configuration files:
  /etc/opt/IDEALX/smbldap-tools/smbldap.conf->
                        /etc/opt/IDEALX/smbldap-tools/smbldap.conf.old
  /etc/opt/IDEALX/smbldap-tools/smbldap_bind.conf->
                   /etc/opt/IDEALX/smbldap-tools/smbldap_bind.conf.old
writing new configuration file:
  /etc/opt/IDEALX/smbldap-tools/smbldap.conf done.
  /etc/opt/IDEALX/smbldap-tools/smbldap_bind.conf done.
</screen>
                Since a slave LDAP server has not been configured, it is necessary to specify the IP
                address of the master LDAP server for both the master and the slave configuration
                prompts.
                </para></step>

                <step><para>
                Change to the directory that contains the <filename>smbldap.conf</filename> file,
                then verify its contents.
                </para></step>

        </procedure>

        <para>
        The smbldap-tools are now ready for use.
        </para>

        </sect3>

        </sect2>

        <sect2>
        <title>LDAP Initialization and Creation of User and Group Accounts</title>

        <para>
        The LDAP database must be populated with well-known Windows domain user accounts and domain group 
        accounts before Samba can be used. The following procedures step you through the process.
        </para>

        <para>
        At this time, Samba-3 requires that on a PDC all UNIX (POSIX) group accounts that are
        mapped (linked) to Windows domain group accounts must be in the LDAP database. It does not
        hurt to have UNIX user and group accounts in both the system files as well as in the LDAP
        database. From a UNIX system perspective, the NSS resolver checks system files before
        referring to LDAP. If the UNIX system can resolve (find) an account in the system file, it
        does not need to ask LDAP.
        </para>

        <para>
        Addition of an account to the LDAP backend can be done in two ways:
        </para>

        <itemizedlist>
                <listitem><para>
                <indexterm><primary>NIS</primary></indexterm>
                <indexterm><primary>/etc/passwd</primary></indexterm>
                <indexterm><primary>Posix accounts</primary></indexterm>
                <indexterm><primary>pdbedit</primary></indexterm>
                <indexterm><primary>SambaSamAccount</primary></indexterm>
                <indexterm><primary>PosixAccount</primary></indexterm>
                If you always have a user account in the <filename>/etc/passwd</filename> on every 
                server or in a NIS(+) backend, it is not necessary to add POSIX accounts for them in 
                LDAP. In this case, you can add Windows domain user accounts using the 
                <command>pdbedit</command> utility. Use of this tool from the command line adds the 
                SambaSamAccount entry for the user, but does not add the PosixAccount entry for the user.
                </para>

                <para>
                This is the least desirable method because when LDAP is used as the passwd backend Samba
                expects the POSIX account to be in LDAP also. It is possible to use the PADL account
                migration tool to migrate all system accounts from either the <filename>/etc/passwd</filename>
                files, or from NIS, to LDAP.
                </para></listitem>

                <listitem><para>
                If you decide that it is probably a good idea to add both the PosixAccount attributes
                as well as the SambaSamAccount attributes for each user, then a suitable script is needed.
                In the example system you are installing in this exercise, you are making use of the
                Idealx smbldap-tools scripts. A copy of these tools, preconfigured for this system,
                is included on the enclosed CD-ROM under <filename>Chap06/Tools.</filename>
                </para></listitem>
        </itemizedlist>

        <para>
        <indexterm><primary>Idealx</primary><secondary>smbldap-tools</secondary></indexterm>
        If you wish to have more control over how the LDAP database is initialized or 
        if you don't want to use the Idealx smbldap-tools, you should refer to 
        <link linkend="appendix"/>, <link linkend="altldapcfg"/>.
        </para>

        <para>
        <indexterm><primary>smbldap-populate</primary></indexterm>
        The following steps initialize the LDAP database, and then you can add user and group
        accounts that Samba can use. You use the <command>smbldap-populate</command> to
        seed the LDAP database. You then manually add the accounts shown in <link linkend="sbehap-bigacct"/>. 
        The list of users does not cover all 500 network users; it provides examples only.
        </para>

        <note><para>
        <indexterm><primary>LDAP</primary><secondary>database</secondary></indexterm>
        <indexterm><primary>directory</primary><secondary>People container</secondary></indexterm>
        <indexterm><primary>directory</primary><secondary>Computers container</secondary></indexterm>
        In the following examples, as the LDAP database is initialized, we do create a container
        for Computer (machine) accounts. In the Samba-3 &smb.conf; files, specific use is made
        of the People container, not the Computers container, for domain member accounts. This is not a
        mistake; it is a deliberate action that is necessitated by the fact that the resolution of 
        a machine (computer) account to a UID is done via NSS. The only way this can be handled is
        using the NSS (<filename>/etc/nsswitch.conf</filename>) entry for <constant>passwd</constant>,
        which is resolved using the <filename>nss_ldap</filename> library. The configuration file for
        the <filename>nss_ldap</filename> library is the file <filename>/etc/ldap.conf</filename> that
        provides only one possible LDAP search command that is specified by the entry called
        <constant>nss_base_passwd</constant>. This means that the search path must take into account
        the directory structure so that the LDAP search will commence at a level that is above
        both the Computers container and the Users (or People) container. If this is done, it is
        necessary to use a search that will descend the directory tree so that the machine account
        can be found. Alternatively, by placing all machine accounts in the People container, we
        are able to sidestep this limitation. This is the simpler solution that has been adopted
        in this chapter.
        </para></note>


        <table id="sbehap-bigacct">
                <title>Abmas Network Users and Groups</title>
                <tgroup cols="4">
                        <colspec align="left"/>
                        <colspec align="left"/>
                        <colspec align="left"/>
                        <colspec align="left"/>
                        <thead>
                                <row>
                                        <entry align="center">Account Name</entry>
                                        <entry align="center">Type</entry>
                                        <entry align="center">ID</entry>
                                        <entry align="center">Password</entry>
                                </row>
                        </thead>
                        <tbody>
                                <row>
                                        <entry>Robert Jordan</entry>
                                        <entry>User</entry>
                                        <entry>bobj</entry>
                                        <entry>n3v3r2l8</entry>
                                </row>
                                <row>
                                        <entry>Stanley Soroka</entry>
                                        <entry>User</entry>
                                        <entry>stans</entry>
                                        <entry>impl13dst4r</entry>
                                </row>
                                <row>
                                        <entry>Christine Roberson</entry>
                                        <entry>User</entry>
                                        <entry>chrisr</entry>
                                        <entry>S9n0nw4ll</entry>
                                </row>
                                <row>
                                        <entry>Mary Vortexis</entry>
                                        <entry>User</entry>
                                        <entry>maryv</entry>
                                        <entry>kw13t0n3</entry>
                                </row>
                                <row>
                                        <entry>Accounts</entry>
                                        <entry>Group</entry>
                                        <entry>Accounts</entry>
                                        <entry></entry>
                                </row>
                                <row>
                                        <entry>Finances</entry>
                                        <entry>Group</entry>
                                        <entry>Finances</entry>
                                        <entry></entry>
                                </row>
                                <row>
                                        <entry>Insurance</entry>
                                        <entry>Group</entry>
                                        <entry>PIOps</entry>
                                        <entry></entry>
                                </row>
                        </tbody>
                </tgroup>
        </table>

        <procedure id="creatacc">
        <title>LDAP Directory Initialization Steps</title>

                <step><para>
                Start the LDAP server by executing:
<screen>
&rootprompt; rcldap start
Starting ldap-server                           done
</screen>
                </para></step>

                <step><para>
                Change to the <filename>/opt/IDEALX/sbin</filename> directory.
                </para></step>

                <step><para>
                Execute the script that will populate the LDAP database as shown here:
<screen>
&rootprompt; ./smbldap-populate -a root -k 0 -m 0
</screen>
                The expected output from this is:
<screen>
Using workgroup name from smb.conf: sambaDomainName=MEGANET2
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
=> Warning: you must update smbldap.conf configuration file to :
=> sambaUnixIdPooldn parameter must be set
        to "sambaDomainName=MEGANET2,dc=abmas,dc=biz"
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Using builtin directory structure
adding new entry: dc=abmas,dc=biz
adding new entry: ou=People,dc=abmas,dc=biz
adding new entry: ou=Groups,dc=abmas,dc=biz
entry ou=People,dc=abmas,dc=biz already exist.
adding new entry: ou=Idmap,dc=abmas,dc=biz
adding new entry: sambaDomainName=MEGANET2,dc=abmas,dc=biz
adding new entry: uid=root,ou=People,dc=abmas,dc=biz
adding new entry: uid=nobody,ou=People,dc=abmas,dc=biz
adding new entry: cn=Domain Admins,ou=Groups,dc=abmas,dc=biz
adding new entry: cn=Domain Users,ou=Groups,dc=abmas,dc=biz
adding new entry: cn=Domain Guests,ou=Groups,dc=abmas,dc=biz
adding new entry: cn=Domain Computers,ou=Groups,dc=abmas,dc=biz
adding new entry: cn=Administrators,ou=Groups,dc=abmas,dc=biz
adding new entry: cn=Print Operators,ou=Groups,dc=abmas,dc=biz
adding new entry: cn=Backup Operators,ou=Groups,dc=abmas,dc=biz
adding new entry: cn=Replicators,ou=Groups,dc=abmas,dc=biz
</screen>
                </para></step>

                <step><para>
                Edit the <filename>/etc/smbldap-tools/smbldap.conf</filename> file so that the following
                information is changed from:
<screen>
# Where to store next uidNumber and gidNumber available
sambaUnixIdPooldn="cn=NextFreeUnixId,${suffix}"
</screen>
                to read, after modification:
<screen>
# Where to store next uidNumber and gidNumber available
#sambaUnixIdPooldn="cn=NextFreeUnixId,${suffix}"
sambaUnixIdPooldn="sambaDomainName=MEGANET2,dc=abmas,dc=biz"
</screen>
                </para></step>

                <step><para>
                It is necessary to restart the LDAP server as shown here:
<screen>
&rootprompt; rcldap restart
Shutting down ldap-server                            done
Starting ldap-server                                 done
</screen>
                </para></step>

                <step><para>
                <indexterm><primary>slapcat</primary></indexterm>
                So that we can use a global IDMAP repository, the LDAP directory must have a container object for IDMAP data. 
                There are several ways you can check that your LDAP database is able to receive IDMAP information. One of 
                the simplest is to execute:
<screen>
&rootprompt; slapcat | grep -i idmap
dn: ou=Idmap,dc=abmas,dc=biz
ou: idmap
</screen>
                <indexterm> <primary>ldapadd</primary></indexterm>
                If the execution of this command does not return IDMAP entries, you need to create an LDIF
                template file (see <link linkend="sbehap-ldifadd"/>). You can add the required entries using 
                the following command:
<screen>
&rootprompt; ldapadd -x -D "cn=Manager,dc=abmas,dc=biz" \
                -w not24get &lt; /etc/openldap/idmap.LDIF
</screen>
                Samba automatically populates this LDAP directory container when it needs to.
                </para></step>

                <step><para>
                <indexterm><primary>slapcat</primary></indexterm>
                It looks like all has gone well, as expected. Let's confirm that this is the case
                by running a few tests. First we check the contents of the database directly
                by running <command>slapcat</command> as follows (the output has been cut down):
<screen>
&rootprompt; slapcat
dn: dc=abmas,dc=biz
objectClass: dcObject
objectClass: organization
dc: abmas
o: abmas
structuralObjectClass: organization
entryUUID: 5ab02bf6-c536-1027-9d29-b1f32350fb43
creatorsName: cn=Manager,dc=abmas,dc=biz
createTimestamp: 20031217234200Z
entryCSN: 2003121723:42:00Z#0x0001#0#0000
modifiersName: cn=Manager,dc=abmas,dc=biz
modifyTimestamp: 20031217234200Z
...
dn: cn=Domain Computers,ou=Groups,dc=abmas,dc=biz
objectClass: posixGroup
objectClass: sambaGroupMapping
gidNumber: 553
cn: Domain Computers
description: Netbios Domain Computers accounts
sambaSID: S-1-5-21-3504140859-1010554828-2431957765-553
sambaGroupType: 2
displayName: Domain Computers
structuralObjectClass: posixGroup
entryUUID: 5e0a41d8-c536-1027-9d3b-b1f32350fb43
creatorsName: cn=Manager,dc=abmas,dc=biz
createTimestamp: 20031217234206Z
entryCSN: 2003121723:42:06Z#0x0002#0#0000
modifiersName: cn=Manager,dc=abmas,dc=biz
modifyTimestamp: 20031217234206Z
</screen>
                This looks good so far.
                </para></step>

                <step><para>
                <indexterm><primary>ldapsearch</primary></indexterm>
                The next step is to prove that the LDAP server is running and responds to a
                search request. Execute the following as shown (output has been cut to save space):
<screen>
&rootprompt; ldapsearch -x -b "dc=abmas,dc=biz" "(ObjectClass=*)"
# extended LDIF
#
# LDAPv3
# base &lt;dc=abmas,dc=biz&gt; with scope sub
# filter: (ObjectClass=*)
# requesting: ALL
#

# abmas.biz
dn: dc=abmas,dc=biz
objectClass: dcObject
objectClass: organization
dc: abmas
o: abmas

# People, abmas.biz
dn: ou=People,dc=abmas,dc=biz
objectClass: organizationalUnit
ou: People
...
# Domain Computers, Groups, abmas.biz
dn: cn=Domain Computers,ou=Groups,dc=abmas,dc=biz
objectClass: posixGroup
objectClass: sambaGroupMapping
gidNumber: 553
cn: Domain Computers
description: Netbios Domain Computers accounts
sambaSID: S-1-5-21-3504140859-1010554828-2431957765-553
sambaGroupType: 2
displayName: Domain Computers

# search result
search: 2
result: 0 Success

# numResponses: 20
# numEntries: 19
</screen>
                Good. It is all working just fine.
                </para></step>

                <step><para>
                <indexterm><primary>getent</primary></indexterm>
                You must now make certain that the NSS resolver can interrogate LDAP also.
                Execute the following commands:
<screen>
&rootprompt; getent passwd | grep root
root:x:998:512:Netbios Domain Administrator:/home:/bin/false

&rootprompt; getent group | grep Domain
Domain Admins:x:512:root
Domain Users:x:513:
Domain Guests:x:514:
Domain Computers:x:553:
</screen>
                <indexterm><primary>nss_ldap</primary></indexterm>
                This demonstrates that the <command>nss_ldap</command> library is functioning
                as it should. If these two steps fail to produce this information, refer to
                <link linkend="sbeavoid"/> for diagnostic procedures that can be followed to
                isolate the cause of the problem. Proceed to the next step only when the previous steps
                have been successfully completed.
                </para></step>

                <step><para>
                <indexterm><primary>smbldap-useradd</primary></indexterm>
                <indexterm><primary>smbldap-passwd</primary></indexterm>
                <indexterm><primary>smbpasswd</primary></indexterm>
                Our database is now ready for the addition of network users. For each user for
                whom an account must be created, execute the following:
<screen>
&rootprompt; ./smbldap-useradd -m -a <constant>username</constant>
&rootprompt; ./smbldap-passwd <constant>username</constant>
Changing password for <constant>username</constant>
New password : XXXXXXXX
Retype new password : XXXXXXXX

&rootprompt; smbpasswd <constant>username</constant>
New SMB password: XXXXXXXX
Retype new SMB password: XXXXXXXX
</screen>
                where <constant>username</constant> is the login ID for each user.
                </para></step>

                <step><para>
                <indexterm><primary>getent</primary></indexterm>
                Now verify that the UNIX (POSIX) accounts can be resolved via NSS by executing the
                following:
<screen>
&rootprompt; getent passwd
root:x:0:0:root:/root:/bin/bash
bin:x:1:1:bin:/bin:/bin/bash
...
root:x:0:512:Netbios Domain Administrator:/home:/bin/false
nobody:x:999:514:nobody:/dev/null:/bin/false
bobj:x:1000:513:System User:/home/bobj:/bin/bash
stans:x:1001:513:System User:/home/stans:/bin/bash
chrisr:x:1002:513:System User:/home/chrisr:/bin/bash
maryv:x:1003:513:System User:/home/maryv:/bin/bash
</screen>
                This demonstrates that user account resolution via LDAP is working.
                </para></step>

                <step><para>
                This step will determine whether or not identity resolution is working correctly.
                Do not procede is this step fails, rather find the cause of the failure. The
                <command>id</command> command may be used to validate your configuration so far,
                as shown here:
<screen>
&rootprompt; id chrisr
uid=1002(chrisr) gid=513(Domain Users) groups=513(Domain Users)
</screen>
                This confirms that the UNIX (POSIX) user account information can be resolved from LDAP
                by system tools that make a getentpw() system call.
                </para></step>

                <step><para>
                <indexterm><primary>smbldap-usermod</primary></indexterm>
                The root account must have UID=0; if not, this means that operations conducted from
                a Windows client using tools such as the Domain User Manager fails under UNIX because
                the management of user and group accounts requires that the UID=0. Additionally, it is
                a good idea to make certain that no matter how root account credentials are resolved,
                the home directory and shell are valid. You decide to effect this immediately
                as demonstrated here:
<screen>
&rootprompt; cd /opt/IDEALX/sbin
&rootprompt; ./smbldap-usermod -u 0 -d /root -s /bin/bash root
</screen>
                </para></step>

                <step><para>
                Verify that the changes just made to the <constant>root</constant> account were
                accepted by executing:
<screen>
&rootprompt; getent passwd | grep root
root:x:0:0:root:/root:/bin/bash
root:x:0:512:Netbios Domain Administrator:/root:/bin/bash
</screen>
                This demonstrates that the changes were accepted.
                </para></step>

                <step><para>
                Make certain that a home directory has been created for every user by listing the
                directories in <filename>/home</filename> as follows:
<screen>
&rootprompt; ls -al /home
drwxr-xr-x   8 root   root         176 Dec 17 18:50 ./
drwxr-xr-x  21 root   root         560 Dec 15 22:19 ../
drwx------   7 bobj   Domain Users     568 Dec 17 01:16 bobj/
drwx------   7 chrisr Domain Users     568 Dec 17 01:19 chrisr/
drwx------   7 maryv  Domain Users     568 Dec 17 01:27 maryv/
drwx------   7 stans  Domain Users     568 Dec 17 01:43 stans/
</screen>
                This is precisely what we want to see.
                </para></step>

                <step><para>
                <indexterm><primary>ldapsam</primary></indexterm>
                <indexterm><primary>pdbedit</primary></indexterm>
                The final validation step involves making certain that Samba-3 can obtain the user
                accounts from the LDAP ldapsam passwd backend. Execute the following command as shown:
<screen>
&rootprompt; pdbedit -Lv chrisr
Unix username:        chrisr
NT username:          chrisr
Account Flags:        [U          ]
User SID:             S-1-5-21-3504140859-1010554828-2431957765-3004
Primary Group SID:    S-1-5-21-3504140859-1010554828-2431957765-513
Full Name:            System User
Home Directory:       \\MASSIVE\homes
HomeDir Drive:        H:
Logon Script:         scripts\login.cmd
Profile Path:         \\MASSIVE\profiles\chrisr
Domain:               MEGANET2
Account desc:         System User
Workstations:
Munged dial:
Logon time:           0
Logoff time:          Mon, 18 Jan 2038 20:14:07 GMT
Kickoff time:         Mon, 18 Jan 2038 20:14:07 GMT
Password last set:    Wed, 17 Dec 2003 17:17:40 GMT
Password can change:  Wed, 17 Dec 2003 17:17:40 GMT
Password must change: Mon, 18 Jan 2038 20:14:07 GMT
Last bad password   : 0
Bad password count  : 0
Logon hours         : FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
</screen>
                This looks good. Of course, you fully expected that it would all work, didn't you?
                </para></step>

                <step><para>
                <indexterm><primary>smbldap-groupadd</primary></indexterm>
                Now you add the group accounts that are used on the Abmas network. Execute
                the following exactly as shown:
<screen>
&rootprompt; ./smbldap-groupadd -a Accounts
&rootprompt; ./smbldap-groupadd -a Finances
&rootprompt; ./smbldap-groupadd -a PIOps
</screen>
                The addition of groups does not involve keyboard interaction, so the lack of console
                output is of no concern.
                </para></step>

                <step><para>
                <indexterm><primary>getent</primary></indexterm>
                You really do want to confirm that UNIX group resolution from LDAP is functioning 
                as it should. Let's do this as shown here:
<screen>
&rootprompt; getent group
...
Domain Admins:x:512:root
Domain Users:x:513:bobj,stans,chrisr,maryv
Domain Guests:x:514:
...
Accounts:x:1000:
Finances:x:1001:
PIOps:x:1002:
</screen>
                The well-known special accounts (Domain Admins, Domain Users, Domain Guests), as well
                as our own site-specific group accounts, are correctly listed. This is looking good.
                </para></step>

                <step><para>
                <indexterm><primary>net</primary><secondary>groupmap</secondary><tertiary>list</tertiary></indexterm>
                The final step we need to validate is that Samba can see all the Windows domain groups
                and that they are correctly mapped to the respective UNIX group account. To do this,
                just execute the following command:
<screen>
&rootprompt; net groupmap list
Domain Admins (S-1-5-21-3504140859-...-2431957765-512) -> Domain Admins
Domain Users (S-1-5-21-3504140859-...-2431957765-513) -> Domain Users
Domain Guests (S-1-5-21-3504140859-...-2431957765-514) -> Domain Guests
...
Accounts (S-1-5-21-3504140859-1010554828-2431957765-3001) -> Accounts
Finances (S-1-5-21-3504140859-1010554828-2431957765-3003) -> Finances
PIOps (S-1-5-21-3504140859-1010554828-2431957765-3005) -> PIOps
</screen>
                This is looking good. Congratulations &smbmdash; it works! Note that in the above output
                the lines were shortened by replacing the middle value (1010554828) of the SID with the 
                ellipsis (...).
                </para></step>

                <step><para>
                The server you have so carefully built is now ready for another important step. You 
                start the Samba-3 server and validate its operation. Execute the following to render all 
                the processes needed fully operative so that, on system reboot, they are automatically 
                started:
<screen>
&rootprompt; chkconfig named on
&rootprompt; chkconfig dhcpd on
&rootprompt; chkconfig ldap on
&rootprompt; chkconfig nmb on
&rootprompt; chkconfig smb on
&rootprompt; chkconfig winbind on
&rootprompt; rcnmb start
&rootprompt; rcsmb start
&rootprompt; rcwinbind start
</screen>
                </para></step>

                <step><para>
                The next step might seem a little odd at this point, but take note that you are about to
                start <command>winbindd</command>, which must be able to authenticate to the PDC via the
                localhost interface with the <command>smbd</command> process. This account can be
                easily created by joining the PDC to the domain by executing the following command:
<screen>
&rootprompt; net rpc join -S MASSIVE -U root%not24get
</screen>
                Note: Before executing this command on the PDC, both <command>nmbd</command> and
                <command>smbd</command> must be started so that the <command>net</command> command
                can communicate with <command>smbd</command>. The expected output is as follows:
<screen>
Joined domain MEGANET2.
</screen>
                This indicates that the domain security account for the PDC has been correctly created.
                </para></step>

                <step><para>
                At this time it is necessary to restart <command>winbindd</command> so that it can
                correctly authenticate to the PDC. The following command achieves that:
<screen>
&rootprompt; rcwinbind restart
</screen>
                </para></step>

                <step><para>
                <indexterm><primary>smbclient</primary></indexterm>
                You may now check Samba-3 operation as follows:
<screen>
&rootprompt; smbclient -L massive -U%

        Sharename      Type      Comment
        ---------      ----      -------
        IPC$           IPC       IPC Service (Samba 3.0.20)
        accounts       Disk      Accounting Files
        service        Disk      Financial Services Files
        pidata         Disk      Property Insurance Files
        apps           Disk      Application Files
        netlogon       Disk      Network Logon Service
        profiles       Disk      Profile Share
        profdata       Disk      Profile Data Share
        ADMIN$         IPC       IPC Service (Samba 3.0.20)

        Server               Comment
        ---------            -------
        MASSIVE              Samba 3.0.20

        Workgroup            Master
        ---------            -------
        MEGANET2             MASSIVE
</screen>
        This shows that an anonymous connection is working.
                </para></step>

                <step><para>
                For your finale, let's try an authenticated connection:
<screen>
&rootprompt; smbclient //massive/bobj -Ubobj%n3v3r2l8
smb: \> dir
  .                    D        0  Wed Dec 17 01:16:19 2003
  ..                   D        0  Wed Dec 17 19:04:42 2003
  bin                  D        0  Tue Sep  2 04:00:57 2003
  Documents            D        0  Sun Nov 30 07:28:20 2003
  public_html          D        0  Sun Nov 30 07:28:20 2003
  .urlview             H      311  Fri Jul  7 06:55:35 2000
  .dvipsrc             H      208  Fri Nov 17 11:22:02 1995

          57681 blocks of size 524288. 57128 blocks available
smb: \> q
</screen>
                Well done. All is working fine.
                </para></step>
        </procedure>

        <para>
        The server <constant>MASSIVE</constant> is now configured, and it is time to move onto the next task.
        </para>

        </sect2>

        <sect2 id="sbehap-ptrcfg">
        <title>Printer Configuration</title>

        <para>
        <indexterm><primary>CUPS</primary></indexterm>
        The configuration for Samba-3 to enable CUPS raw-print-through printing has already been
        taken care of in the &smb.conf; file. The only preparation needed for <constant>smart</constant>
        printing to be possible involves creation of the directories in which Samba-3 stores
        Windows printing driver files.
        </para>

        <procedure>
        <title>Printer Configuration Steps</title>

                <step><para>
                Configure all network-attached printers to have a fixed IP address.
                </para></step>

                <step><para>
                Create an entry in the DNS database on the server <constant>MASSIVE</constant>
                in both the forward lookup database for the zone <constant>abmas.biz.hosts</constant>
                and in the reverse lookup database for the network segment that the printer is to
                be located in. Example configuration files for similar zones were presented in <link linkend="secure"/>,
                <link linkend="abmasbiz"/> and in <link linkend="eth2zone"/>.
                </para></step>

                <step><para>
                Follow the instructions in the printer manufacturers' manuals to permit printing
                to port 9100.  Use any other port the manufacturer specifies for direct mode,
                raw printing.  This allows the CUPS spooler to print using raw mode protocols.
                <indexterm><primary>CUPS</primary></indexterm>
                <indexterm><primary>raw printing</primary></indexterm>
                </para></step>

                <step><para>
                <indexterm><primary>lpadmin</primary></indexterm>
                <indexterm><primary>CUPS</primary><secondary>queue</secondary></indexterm>
                Only on the server to which the printer is attached, configure the CUPS Print
                Queues as follows:
<screen>
&rootprompt; lpadmin -p <parameter>printque</parameter>
         -v socket://<parameter>printer-name</parameter>.abmas.biz:9100 -E
</screen>
                <indexterm><primary>print filter</primary></indexterm>
                This step creates the necessary print queue to use no assigned print filter. This
                is ideal for raw printing, that is, printing without use of filters.
                The name <parameter>printque</parameter> is the name you have assigned for
                the particular printer.
                </para></step>

                <step><para>
                Print queues may not be enabled at creation. Make certain that the queues
                you have just created are enabled by executing the following:
<screen>
&rootprompt; /usr/bin/enable <parameter>printque</parameter>
</screen>
                </para></step>

                <step><para>
                Even though your print queue may be enabled, it is still possible that it
                may not accept print jobs. A print queue will service incoming printing
                requests only when configured to do so. Ensure that your print queue is
                set to accept incoming jobs by executing the following commands:
<screen>
&rootprompt; /usr/bin/accept <parameter>printque</parameter>
</screen>
                </para></step>

                <step><para>
                <indexterm><primary>mime type</primary></indexterm>
                <indexterm><primary>/etc/mime.convs</primary></indexterm>
                <indexterm><primary>application/octet-stream</primary></indexterm>
                Edit the file <filename>/etc/cups/mime.convs</filename> to uncomment the line:
<screen>
application/octet-stream     application/vnd.cups-raw      0     -
</screen>
                </para></step>

                 <step><para>
                 <indexterm><primary>/etc/mime.types</primary></indexterm>
                 Edit the file <filename>/etc/cups/mime.types</filename> to uncomment the line:
<screen>
application/octet-stream
</screen>
                </para></step>

                <step><para>
                Refer to the CUPS printing manual for instructions regarding how to configure
                CUPS so that print queues that reside on CUPS servers on remote networks
                route print jobs to the print server that owns that queue. The default setting
                on your CUPS server may automatically discover remotely installed printers and
                may permit this functionality without requiring specific configuration.
                </para></step>

                <step><para>
                The following action creates the necessary directory subsystem. Follow these 
                steps to printing heaven:
<screen>
&rootprompt; mkdir -p /var/lib/samba/drivers/{W32ALPHA,W32MIPS,W32X86,WIN40}
&rootprompt; chown -R root:root /var/lib/samba/drivers
&rootprompt; chmod -R ug=rwx,o=rx /var/lib/samba/drivers
</screen>
                </para></step>

        </procedure>

        </sect2>

</sect1>

<sect1 id="sbehap-bldg1">
        <title>Samba-3 BDC Configuration</title>

        <procedure>
        <title>Configuration of BDC Called: <constant>BLDG1</constant></title>

                <step><para>
                Install the files in <link linkend="sbehap-bldg1-smbconf"/>,
                <link linkend="sbehap-shareconfa"/>, and <link linkend="sbehap-shareconfb"/>
                into the <filename>/etc/samba/</filename> directory. The three files
                should be added together to form the &smb.conf; file.
                </para></step>

                <step><para>
                Verify the &smb.conf; file as in step 2 of <link
              linkend="sbehap-massive"/>.
                </para></step>

                <step><para>
                Carefully follow the steps outlined in <link linkend="sbehap-PAM-NSS"/>, taking
                particular note to install the correct <filename>ldap.conf</filename>.
                </para></step>

                <step><para>
                Verify that the NSS resolver is working. You may need to cycle the run level
                to 1 and back to 5 before the NSS LDAP resolver functions. Follow these
                commands:
<screen>
&rootprompt; init 1
</screen>
                After the run level has been achieved, you are prompted to provide the
                <constant>root</constant> password. Log on, and then execute:
<screen>
&rootprompt; init 5
</screen>
                When the normal logon prompt appears, log into the system as <constant>root</constant>
                and then execute these commands:
<screen>
&rootprompt; getent passwd
root:x:0:0:root:/root:/bin/bash
bin:x:1:1:bin:/bin:/bin/bash
daemon:x:2:2:Daemon:/sbin:/bin/bash
lp:x:4:7:Printing daemon:/var/spool/lpd:/bin/bash
mail:x:8:12:Mailer daemon:/var/spool/clientmqueue:/bin/false
...
root:x:0:512:Netbios Domain Administrator:/root:/bin/bash
nobody:x:999:514:nobody:/dev/null:/bin/false
bobj:x:1000:513:System User:/home/bobj:/bin/bash
stans:x:1001:513:System User:/home/stans:/bin/bash
chrisr:x:1002:513:System User:/home/chrisr:/bin/bash
maryv:x:1003:513:System User:/home/maryv:/bin/bash
vaioboss$:x:1005:553:vaioboss$:/dev/null:/bin/false
bldg1$:x:1006:553:bldg1$:/dev/null:/bin/false
</screen>
                This is the correct output. If the accounts that have UIDs above 512 are not shown, there is a problem.
                </para></step>

                <step><para>
                <indexterm><primary>getent</primary></indexterm>
                The next step in the verification process involves testing the operation of UNIX group
                resolution via the NSS LDAP resolver. Execute these commands:
<screen>
&rootprompt; getent group
root:x:0:
bin:x:1:daemon
daemon:x:2:
sys:x:3:
...
Domain Admins:x:512:root
Domain Users:x:513:bobj,stans,chrisr,maryv,jht
Domain Guests:x:514:
Administrators:x:544:
Users:x:545:
Guests:x:546:nobody
Power Users:x:547:
Account Operators:x:548:
Server Operators:x:549:
Print Operators:x:550:
Backup Operators:x:551:
Replicator:x:552:
Domain Computers:x:553:
Accounts:x:1000:
Finances:x:1001:
PIOps:x:1002:
</screen>
                This is also the correct and desired output, because it demonstrates that the LDAP client
                is able to communicate correctly with the LDAP server (<constant>MASSIVE</constant>).
                </para></step>

                <step><para>
                <indexterm><primary>smbpasswd</primary></indexterm>
                You must now set the LDAP administrative password into the Samba-3 <filename>secrets.tdb</filename>
                file by executing this command:
<screen>
&rootprompt; smbpasswd -w not24get
Setting stored password for "cn=Manager,dc=abmas,dc=biz" in secrets.tdb
</screen>
                </para></step>

                <step><para>
                Now you must obtain the domain SID from the PDC and store it into the
                <filename>secrets.tdb</filename> file also. This step is not necessary with an LDAP
                passdb backend because Samba-3 obtains the domain SID from the 
                sambaDomain object it automatically stores in the LDAP backend. It does not hurt to
                add the SID to the <filename>secrets.tdb</filename>, and if you wish to do so, this 
                command can achieve that:
<screen>
&rootprompt; net rpc getsid MEGANET2
Storing SID S-1-5-21-3504140859-1010554828-2431957765 \
                           for Domain MEGANET2 in secrets.tdb
</screen>
                When configuring a Samba-3 BDC that has an LDAP backend, there is no need to take
                any special action to join it to the domain. However, winbind communicates with the
                domain controller that is running on the localhost and must be able to authenticate,
                thus requiring that the BDC should be joined to the domain. The process of joining
                the domain creates the necessary authentication accounts.
                </para></step>

                <step><para>
                To join the Samba BDC to the domain, execute the following:
<screen>
&rootprompt; net rpc join -U root%not24get
Joined domain MEGANET2.
</screen>
                This indicates that the domain security account for the BDC has been correctly created.
                </para></step>

                <step><para>
                <indexterm>
                        <primary>pdbedit</primary>
                </indexterm>
                Verify that user and group account resolution works via Samba-3 tools as follows:
<screen>
&rootprompt; pdbedit -L
root:0:root
nobody:65534:nobody
bobj:1000:System User
stans:1001:System User
chrisr:1002:System User
maryv:1003:System User
bldg1$:1006:bldg1$

&rootprompt; net groupmap list
Domain Admins (S-1-5-21-3504140859-...-2431957765-512) ->
                                                        Domain Admins
Domain Users (S-1-5-21-3504140859-...-2431957765-513) -> Domain Users
Domain Guests (S-1-5-21-3504140859-...-2431957765-514) -> 
                                                        Domain Guests
Administrators (S-1-5-21-3504140859-...-2431957765-544) ->
                                                       Administrators
...
Accounts (S-1-5-21-3504140859-1010554828-2431957765-3001) -> Accounts
Finances (S-1-5-21-3504140859-1010554828-2431957765-3003) -> Finances
PIOps (S-1-5-21-3504140859-1010554828-2431957765-3005) -> PIOps
</screen>
                These results show that all things are in order.
                </para></step>

                <step><para>
                The server you have so carefully built is now ready for another important step. Now
                start the Samba-3 server and validate its operation. Execute the following to render all
                the processes needed fully operative so that, upon system reboot, they are automatically
                started:
<screen>
&rootprompt; chkconfig named on
&rootprompt; chkconfig dhcpd on
&rootprompt; chkconfig nmb on
&rootprompt; chkconfig smb on
&rootprompt; chkconfig winbind on
&rootprompt; rcnmb start
&rootprompt; rcsmb start
&rootprompt; rcwinbind start
</screen>
                Samba-3 should now be running and is ready for a quick test. But not quite yet!
                </para></step>

                <step><para>
                Your new <constant>BLDG1, BLDG2</constant> servers do not have home directories for users.
                To rectify this using the SUSE yast2 utility or by manually editing the <filename>/etc/fstab</filename>
                file, add a mount entry to mount the <constant>home</constant> directory that has been exported
                from the <constant>MASSIVE</constant> server. Mount this resource before proceeding. An alternate
                approach could be to create local home directories for users who are to use these machines.
                This is a choice that you, as system administrator, must make. The following entry in the
                <filename>/etc/fstab</filename> file suffices for now:
<screen>
massive.abmas.biz:/home  /home  nfs     rw 0 0
</screen>
                To mount this resource, execute:
<screen>
&rootprompt; mount -a
</screen>
                Verify that the home directory has been mounted as follows:
<screen>
&rootprompt; df | grep home
massive:/home         29532988    283388  29249600   1% /home
</screen>
                </para></step>

                <step><para>
                Implement a quick check using one of the users that is in the LDAP database. Here you go:
<screen>
&rootprompt; smbclient //bldg1/bobj -Ubobj%n3v3r2l8
smb: \> dir
  .                    D        0  Wed Dec 17 01:16:19 2003
  ..                   D        0  Wed Dec 17 19:04:42 2003
  bin                  D        0  Tue Sep  2 04:00:57 2003
  Documents            D        0  Sun Nov 30 07:28:20 2003
  public_html          D        0  Sun Nov 30 07:28:20 2003
  .urlview             H      311  Fri Jul  7 06:55:35 2000
  .dvipsrc             H      208  Fri Nov 17 11:22:02 1995

          57681 blocks of size 524288. 57128 blocks available
smb: \> q
</screen>
                </para></step>

        </procedure>

        <para>
        Now that the first BDC (<constant>BDLG1</constant>) has been configured it is time to build 
        and configure the second BDC server (<constant>BLDG2</constant>) as follows:
        </para>

        <procedure id="sbehap-bldg2">
        <title>Configuration of BDC Called <constant>BLDG2</constant></title>

                <step><para>
                Install the files in <link linkend="sbehap-bldg2-smbconf"/>,
                <link linkend="sbehap-shareconfa"/>, and <link linkend="sbehap-shareconfb"/>
                into the <filename>/etc/samba/</filename> directory. The three files
                should be added together to form the &smb.conf; file.
                </para></step>

                <step><para>
                Follow carefully the steps shown in <link linkend="sbehap-bldg1"/>, starting at step 2.
                </para></step>

        </procedure>

<example id="sbehap-bldg1-smbconf">
<title>LDAP Based &smb.conf; File, Server: BLDG1</title>
<smbconfblock>
<smbconfcomment>Global parameters</smbconfcomment>
<smbconfsection name="[global]"/>
        <smbconfoption name="unix charset">LOCALE</smbconfoption>
        <smbconfoption name="workgroup">MEGANET2</smbconfoption>
        <smbconfoption name="netbios name">BLDG1</smbconfoption>
        <smbconfoption name="passdb backend">ldapsam:ldap://massive.abmas.biz</smbconfoption>
        <smbconfoption name="enable privileges">Yes</smbconfoption>
        <smbconfoption name="username map">/etc/samba/smbusers</smbconfoption>
        <smbconfoption name="log level">1</smbconfoption>
        <smbconfoption name="syslog">0</smbconfoption>
        <smbconfoption name="log file">/var/log/samba/%m</smbconfoption>
        <smbconfoption name="max log size">50</smbconfoption>
        <smbconfoption name="smb ports">139</smbconfoption>
        <smbconfoption name="name resolve order">wins bcast hosts</smbconfoption>
        <smbconfoption name="printcap name">CUPS</smbconfoption>
        <smbconfoption name="show add printer wizard">No</smbconfoption>
        <smbconfoption name="logon script">scripts\logon.bat</smbconfoption>
        <smbconfoption name="logon path">\\%L\profiles\%U</smbconfoption>
        <smbconfoption name="logon drive">X:</smbconfoption>
        <smbconfoption name="domain logons">Yes</smbconfoption>
        <smbconfoption name="domain master">No</smbconfoption>
        <smbconfoption name="wins server">172.16.0.1</smbconfoption>
        <smbconfoption name="ldap suffix">dc=abmas,dc=biz</smbconfoption>
        <smbconfoption name="ldap machine suffix">ou=People</smbconfoption>
        <smbconfoption name="ldap user suffix">ou=People</smbconfoption>
        <smbconfoption name="ldap group suffix">ou=Groups</smbconfoption>
        <smbconfoption name="ldap idmap suffix">ou=Idmap</smbconfoption>
        <smbconfoption name="ldap admin dn">cn=Manager,dc=abmas,dc=biz</smbconfoption>
        <smbconfoption name="idmap backend">ldap:ldap://massive.abmas.biz</smbconfoption>
        <smbconfoption name="idmap uid">10000-20000</smbconfoption>
        <smbconfoption name="idmap gid">10000-20000</smbconfoption>
        <smbconfoption name="printing">cups</smbconfoption>
        <smbconfoption name="printer admin">root, chrisr</smbconfoption>
</smbconfblock>
</example>


<example id="sbehap-bldg2-smbconf">
<title>LDAP Based &smb.conf; File, Server: BLDG2</title>
<smbconfblock>
<smbconfcomment>Global parameters</smbconfcomment>
<smbconfsection name="[global]"/>
        <smbconfoption name="unix charset">LOCALE</smbconfoption>
        <smbconfoption name="workgroup">MEGANET2</smbconfoption>
        <smbconfoption name="netbios name">BLDG2</smbconfoption>
        <smbconfoption name="passdb backend">ldapsam:ldap://massive.abmas.biz</smbconfoption>
        <smbconfoption name="enable privileges">Yes</smbconfoption>
        <smbconfoption name="username map">/etc/samba/smbusers</smbconfoption>
        <smbconfoption name="log level">1</smbconfoption>
        <smbconfoption name="syslog">0</smbconfoption>
        <smbconfoption name="log file">/var/log/samba/%m</smbconfoption>
        <smbconfoption name="max log size">50</smbconfoption>
        <smbconfoption name="smb ports">139</smbconfoption>
        <smbconfoption name="name resolve order">wins bcast hosts</smbconfoption>
        <smbconfoption name="printcap name">CUPS</smbconfoption>
        <smbconfoption name="show add printer wizard">No</smbconfoption>
        <smbconfoption name="logon script">scripts\logon.bat</smbconfoption>
        <smbconfoption name="logon path">\\%L\profiles\%U</smbconfoption>
        <smbconfoption name="logon drive">X:</smbconfoption>
        <smbconfoption name="domain logons">Yes</smbconfoption>
        <smbconfoption name="domain master">No</smbconfoption>
        <smbconfoption name="wins server">172.16.0.1</smbconfoption>
        <smbconfoption name="ldap suffix">dc=abmas,dc=biz</smbconfoption>
        <smbconfoption name="ldap machine suffix">ou=People</smbconfoption>
        <smbconfoption name="ldap user suffix">ou=People</smbconfoption>
        <smbconfoption name="ldap group suffix">ou=Groups</smbconfoption>
        <smbconfoption name="ldap idmap suffix">ou=Idmap</smbconfoption>
        <smbconfoption name="ldap admin dn">cn=Manager,dc=abmas,dc=biz</smbconfoption>
        <smbconfoption name="idmap backend">ldap:ldap://massive.abmas.biz</smbconfoption>
        <smbconfoption name="idmap uid">10000-20000</smbconfoption>
        <smbconfoption name="idmap gid">10000-20000</smbconfoption>
        <smbconfoption name="printing">cups</smbconfoption>
        <smbconfoption name="printer admin">root, chrisr</smbconfoption>
</smbconfblock>
</example>


<example id="sbehap-shareconfa">
<title>LDAP Based &smb.conf; File, Shares Section &smbmdash; Part A</title>
<smbconfblock>
<smbconfsection name="[accounts]"/>
        <smbconfoption name="comment">Accounting Files</smbconfoption>
        <smbconfoption name="path">/data/accounts</smbconfoption>
        <smbconfoption name="read only">No</smbconfoption>

<smbconfsection name="[service]"/>
        <smbconfoption name="comment">Financial Services Files</smbconfoption>
        <smbconfoption name="path">/data/service</smbconfoption>
        <smbconfoption name="read only">No</smbconfoption>

<smbconfsection name="[pidata]"/>
        <smbconfoption name="comment">Property Insurance Files</smbconfoption>
        <smbconfoption name="path">/data/pidata</smbconfoption>
        <smbconfoption name="read only">No</smbconfoption>

<smbconfsection name="[homes]"/>
        <smbconfoption name="comment">Home Directories</smbconfoption>
        <smbconfoption name="valid users">%S</smbconfoption>
        <smbconfoption name="read only">No</smbconfoption>
        <smbconfoption name="browseable">No</smbconfoption>

<smbconfsection name="[printers]"/>
        <smbconfoption name="comment">SMB Print Spool</smbconfoption>
        <smbconfoption name="path">/var/spool/samba</smbconfoption>
        <smbconfoption name="guest ok">Yes</smbconfoption>
        <smbconfoption name="printable">Yes</smbconfoption>
        <smbconfoption name="browseable">No</smbconfoption>
</smbconfblock>
</example>

<example id="sbehap-shareconfb">
<title>LDAP Based &smb.conf; File, Shares Section &smbmdash; Part B</title>
<smbconfblock>
<smbconfsection name="[apps]"/>
        <smbconfoption name="comment">Application Files</smbconfoption>
        <smbconfoption name="path">/apps</smbconfoption>
        <smbconfoption name="admin users">bjordan</smbconfoption>
        <smbconfoption name="read only">No</smbconfoption>

<smbconfsection name="[netlogon]"/>
        <smbconfoption name="comment">Network Logon Service</smbconfoption>
        <smbconfoption name="path">/var/lib/samba/netlogon</smbconfoption>
        <smbconfoption name="guest ok">Yes</smbconfoption>
        <smbconfoption name="locking">No</smbconfoption>

<smbconfsection name="[profiles]"/>
        <smbconfoption name="comment">Profile Share</smbconfoption>
        <smbconfoption name="path">/var/lib/samba/profiles</smbconfoption>
        <smbconfoption name="read only">No</smbconfoption>
        <smbconfoption name="profile acls">Yes</smbconfoption>

<smbconfsection name="[profdata]"/>
        <smbconfoption name="comment">Profile Data Share</smbconfoption>
        <smbconfoption name="path">/var/lib/samba/profdata</smbconfoption>
        <smbconfoption name="read only">No</smbconfoption>
        <smbconfoption name="profile acls">Yes</smbconfoption>

<smbconfsection name="[print$]"/>
        <smbconfoption name="comment">Printer Drivers</smbconfoption>
        <smbconfoption name="path">/var/lib/samba/drivers</smbconfoption>
        <smbconfoption name="browseable">yes</smbconfoption>
        <smbconfoption name="guest ok">no</smbconfoption>
        <smbconfoption name="read only">yes</smbconfoption>
        <smbconfoption name="write list">root, chrisr</smbconfoption>
</smbconfblock>
</example>

<example id="sbehap-ldifadd">
<title>LDIF IDMAP Add-On Load File &smbmdash; File: /etc/openldap/idmap.LDIF</title>
<screen>
dn: ou=Idmap,dc=abmas,dc=biz
objectClass: organizationalUnit
ou: idmap
structuralObjectClass: organizationalUnit
</screen>
</example>

</sect1>

<sect1>
        <title>Miscellaneous Server Preparation Tasks</title>

        <para>
        My father would say, <quote>Dinner is not over until the dishes have been done.</quote>
        The makings of a great network environment take a lot of effort and attention to detail.
        So far, you have completed most of the complex (and to many administrators, the interesting
        part of server configuration) steps, but remember to tie it all together. Here are
        a few more steps that must be completed so that your network runs like a well-rehearsed
        orchestra.
        </para>

        <sect2>
        <title>Configuring Directory Share Point Roots</title>

        <para>
        In your &smb.conf; file, you have specified Windows shares. Each has a <parameter>path</parameter>
        parameter. Even though it is obvious to all, one of the common Samba networking problems is
        caused by forgetting to verify that every such share root directory actually exists and that it
        has the necessary permissions and ownership.
        </para>

        <para>
        Here is an example, but remember to create the directory needed for every share:
<screen>
&rootprompt; mkdir -p /data/{accounts,finsvcs,piops}
&rootprompt; mkdir -p /apps
&rootprompt; chown -R root:root /data
&rootprompt; chown -R root:root /apps
&rootprompt; chown -R bobj:Accounts /data/accounts
&rootprompt; chown -R bobj:Finances /data/finsvcs
&rootprompt; chown -R bobj:PIOps /data/piops
&rootprompt; chmod -R ug+rwxs,o-rwx /data
&rootprompt; chmod -R ug+rwx,o+rx-w /apps
</screen>
        </para>

        </sect2>

        <sect2>
        <title>Configuring Profile Directories</title>

        <para>
        You made a conscious decision to do everything it would take to improve network client
        performance. One of your decisions was to implement folder redirection. This means that Windows
        user desktop profiles are now made up of two components: a dynamically loaded part and a set of file
        network folders.
        </para>

        <para>
        For this arrangement to work, every user needs a directory structure for the network folder
        portion of his or her profile as shown here:
<screen>
&rootprompt; mkdir -p /var/lib/samba/profdata
&rootprompt; chown root:root /var/lib/samba/profdata
&rootprompt; chmod 755 /var/lib/samba/profdata

# Per user structure
&rootprompt; cd /var/lib/samba/profdata
&rootprompt; mkdir -p <emphasis>username</emphasis>
&rootprompt; for i in InternetFiles Cookies History AppData \
                      LocalSettings MyPictures MyDocuments Recent
&rootprompt; do
&rootprompt; mkdir <emphasis>username</emphasis>/$i
&rootprompt; done
&rootprompt; chown -R <emphasis>username</emphasis>:Domain\ Users <emphasis>username</emphasis>
&rootprompt; chmod -R 750 <emphasis>username</emphasis>
</screen>
        </para>

        <para>
        <indexterm><primary>roaming profile</primary></indexterm>
        <indexterm><primary>mandatory profile</primary></indexterm>
        You have three options insofar as the dynamically loaded portion of the roaming profile
        is concerned: 
        </para>

        <itemizedlist>
                <listitem><para>You may permit the user to obtain a default profile.</para></listitem>
                <listitem><para>You can create a mandatory profile.</para></listitem>
                <listitem><para>You can create a group profile (which is almost always a mandatory profile).</para></listitem>
        </itemizedlist>

        <para>
        Mandatory profiles cannot be overwritten by a user. The change from a user profile to a mandatory
        profile is effected by renaming the <filename>NTUSER.DAT</filename> to <filename>NTUSER.MAN</filename>,
        that is, just by changing the filename extension.
        </para>

        <para>
        <indexterm><primary>SRVTOOLS.EXE</primary></indexterm>
        <indexterm><primary>Domain User Manager</primary></indexterm>
        The location of the profile that a user can obtain is set in the user's account in the LDAP passdb backend.
        You can manage this using the Idealx smbldap-tools or using the 
        <ulink url="ftp://ftp.microsoft.com/Softlib/MSLFILES/SRVTOOLS.EXE">Windows NT4 Domain User Manager</ulink>.
        </para>

        <para>
        It may not be obvious that you must ensure that the root directory for the user's profile exists
        and has the needed permissions. Use the following commands to create this directory:
<screen>
&rootprompt; mkdir -p /var/lib/samba/profiles/<emphasis>username</emphasis>
&rootprompt; chown <emphasis>username</emphasis>:Domain\ Users
            /var/lib/samba/profiles/<emphasis>username</emphasis>
&rootprompt; chmod 700  /var/lib/samba/profiles/<emphasis>username</emphasis>
</screen>
        </para>

        </sect2>

        <sect2>
        <title>Preparation of Logon Scripts</title>

        <para>
        <indexterm><primary>logon script</primary></indexterm>
        The use of a logon script with Windows XP Professional is an option that every site should consider.
        Unless you have locked down the desktop so the user cannot change anything, there is risk that
        a vital network drive setting may be broken or that printer connections may be lost. Logon scripts
        can help to restore persistent network folder (drive) and printer connections in a predictable
        manner. One situation in which such breakage may occur in particular is when a mobile PC (notebook)
        user attaches to another company's network that forces environment changes that are alien to your
        network.
        </para>

        <para>
        If you decide to use network logon scripts, by reference to the &smb.conf; files for the domain
        controllers, you see that the path to the share point for the <constant>NETLOGON</constant>
        share defined is <filename>/var/lib/samba/netlogon</filename>. The path defined for the logon
        script inside that share is <filename>scripts\logon.bat</filename>. This means that as a Windows
        NT/200x/XP client logs onto the network, it tries to obtain the file <filename>logon.bat</filename>
        from the fully qualified path <filename>/var/lib/samba/netlogon/scripts</filename>. This fully
        qualified path should therefore exist whether you install the <filename>logon.bat</filename>.
        </para>

        <para>
        You can, of course, create the fully qualified path by executing:
<screen>
&rootprompt; mkdir -p /var/lib/samba/netlogon/scripts
</screen>
        </para>

        <para>
        You should research the options for logon script implementation by referring to <emphasis>TOSHARG2</emphasis>, Chapter 24,
        Section 24.4. A quick Web search will bring up a host of options. One of the most popular logon
        facilities in use today is called <ulink url="http://www.kixtart.org">KiXtart</ulink>.
        </para>

        </sect2>

        <sect2>
        <title>Assigning User Rights and Privileges</title>

        <para>
        The ability to perform tasks such as joining Windows clients to the domain can be assigned to
        normal user accounts. By default, only the domain administrator account (<constant>root</constant> on UNIX
        systems because it has UID=0) can add accounts. New to Samba 3.0.11 is the ability to grant
        this privilege in a very limited fashion to particular accounts.
        </para>

        <para>
        By default, even Samba-3.0.11 does not grant any rights even to the <constant>Domain Admins</constant>
        group. Here we grant this group all privileges.
        </para>

        <para>
        Samba limits privileges on a per-server basis. This is a deliberate limitation so that users who
        are granted rights can be restricted to particular machines. It is left to the network administrator
        to determine which rights should be provided and to whom.
        </para>

        <procedure>
        <title>Steps for Assignment of User Rights and Privileges</title>

                <step><para>
                Log onto the PDC as the <constant>root</constant> account.
                </para></step>

                <step><para>
                Execute the following command to grant the <constant>Domain Admins</constant> group all
                rights and privileges:
<screen>
&rootprompt; net -S MASSIVE  -U root%not24get rpc rights grant \
        "MEGANET2\Domain Admins" SeMachineAccountPrivilege \
        SePrintOperatorPrivilege SeAddUsersPrivilege \
        SeDiskOperatorPrivilege SeRemoteShutdownPrivilege
Successfully granted rights.
</screen>
                Repeat this step on each domain controller, in each case substituting the name of the server
                (e.g., BLDG1, BLDG2) in place of the PDC called MASSIVE.
                </para></step>

                <step><para>
                In this step the privilege will be granted to Bob Jordan (bobj) to add Windows workstations
                to the domain. Execute the following only on the PDC. It is not necessary to do this on
                BDCs or on DMS machines because machine accounts are only ever added by the PDC:
<screen>
&rootprompt; net -S MASSIVE  -U root%not24get rpc rights grant \
             "MEGANET2\bobj" SeMachineAccountPrivilege
Successfully granted rights.
</screen>
                </para></step>

                <step><para>
                Verify that privilege assignments have been correctly applied by executing:
<screen>
net rpc rights list accounts -Uroot%not24get
MEGANET2\bobj
SeMachineAccountPrivilege

S-0-0
No privileges assigned

BUILTIN\Print Operators
No privileges assigned

BUILTIN\Account Operators
No privileges assigned

BUILTIN\Backup Operators
No privileges assigned

BUILTIN\Server Operators
No privileges assigned

BUILTIN\Administrators
No privileges assigned

Everyone
No privileges assigned

MEGANET2\Domain Admins
SeMachineAccountPrivilege
SePrintOperatorPrivilege
SeAddUsersPrivilege
SeRemoteShutdownPrivilege
SeDiskOperatorPrivilege
</screen>
                </para></step>

        </procedure>

        </sect2>

</sect1>

<sect1>
        <title>Windows Client Configuration</title>

        <para>
        <indexterm><primary>NETLOGON</primary></indexterm>
        In the next few sections, you can configure a new Windows XP Professional disk image on a staging
        machine. You will configure all software, printer settings, profile and policy handling, and desktop
        default profile settings on this system. When it is complete, you copy the contents of the
        <filename>C:\Documents and Settings\Default User</filename> directory to a directory with the same
        name in the <constant>NETLOGON</constant> share on the domain controllers.
        </para>

        <para>
        Much can be learned from the Microsoft Support site regarding how best to set up shared profiles.
        One knowledge-base article in particular stands out:
        "<ulink url="http://support.microsoft.com/default.aspx?scid=kb;EN-US;168475">How to Create a 
        Base Profile for All Users."</ulink>

        </para>

        <sect2 id="redirfold">
        <title>Configuration of Default Profile with Folder Redirection</title>

        <para>
        <indexterm><primary>folder redirection</primary></indexterm>
        Log onto the Windows XP Professional workstation as the local <constant>Administrator</constant>.
        It is necessary to expose folders that are generally hidden to provide access to the
        <constant>Default User</constant> folder.
        </para>

        <procedure>
        <title>Expose Hidden Folders</title>

                <step><para>
                Launch the Windows Explorer by clicking
                        <menuchoice>
                                <guimenu>Start</guimenu>
                                <guimenuitem>My Computer</guimenuitem>
                                <guimenuitem>Tools</guimenuitem>
                                <guimenuitem>Folder Options</guimenuitem>
                                <guimenuitem>View Tab</guimenuitem>
                        </menuchoice>.
                Select <guilabel>Show hidden files and folders</guilabel>,
                and click <guibutton>OK</guibutton>.  Exit Windows Explorer.
                </para></step>

                <step><para>
                <indexterm><primary>regedt32</primary></indexterm>
                Launch the Registry Editor. Click 
                <menuchoice>
                        <guimenu>Start</guimenu>
                        <guimenuitem>Run</guimenuitem>
                </menuchoice>. Key in <command>regedt32</command>, and click
                <guibutton>OK</guibutton>.
                </para></step>

        </procedure>

        <para>
        </para>

        <procedure id="sbehap-rdrfldr">
        <title>Redirect Folders in Default System User Profile</title>

                <step><para>
                <indexterm><primary>HKEY_LOCAL_MACHINE</primary></indexterm>
                <indexterm><primary>Default User</primary></indexterm>
                Give focus to <constant>HKEY_LOCAL_MACHINE</constant> hive entry in the left panel.
                Click <menuchoice>
                        <guimenu>File</guimenu>
                        <guimenuitem>Load Hive...</guimenuitem>
                        <guimenuitem>Documents and Settings</guimenuitem>
                        <guimenuitem>Default User</guimenuitem>
                        <guimenuitem>NTUSER</guimenuitem>
                        <guimenuitem>Open</guimenuitem>
                      </menuchoice>. In the dialog box that opens, enter the key name
                <constant>Default</constant> and click <guibutton>OK</guibutton>.
                </para></step>

                <step><para>
                Browse inside the newly loaded Default folder to:
<screen>
HKEY_LOCAL_MACHINE\Default\Software\Microsoft\Windows\
                     CurrentVersion\Explorer\User Shell Folders\
</screen>
                The right panel reveals the contents as shown in <link linkend="XP-screen001"/>.
                </para></step>

                <step><para>
                <indexterm><primary>%USERPROFILE%</primary></indexterm>
                <indexterm><primary>%LOGONSERVER%</primary></indexterm>
                You edit hive keys. Acceptable values to replace the 
                <constant>%USERPROFILE%</constant> variable includes:

                <itemizedlist>
                        <listitem><para>A drive letter such as <constant>U:</constant></para></listitem>
                        <listitem><para>A direct network path such as
                                <constant>\\MASSIVE\profdata</constant></para></listitem>
                        <listitem><para>A network redirection (UNC name) that contains a macro such as </para>
                                <para><constant>%LOGONSERVER%\profdata\</constant></para></listitem>
                </itemizedlist>
                </para></step>

                <step><para>
                <indexterm><primary>registry keys</primary></indexterm>
                Set the registry keys as shown in <link linkend="proffold"/>. Your implementation makes the assumption
                that users have statically located machines. Notebook computers (mobile users) need to be
                accommodated using local profiles. This is not an uncommon assumption.
                </para></step>

                <step><para>
                Click back to the root of the loaded hive <constant>Default</constant>.
                Click <menuchoice><guimenu>File</guimenu><guimenuitem>Unload Hive...</guimenuitem>
                <guimenuitem>Yes</guimenuitem></menuchoice>.
                </para></step>

                <step><para>
                <indexterm><primary>Registry Editor</primary></indexterm>
                Click <menuchoice><guimenu>File</guimenu><guimenuitem>Exit</guimenuitem></menuchoice>. This exits the
                Registry Editor.
                </para></step>

                <step><para>
                Now follow the procedure given in <link linkend="sbehap-locgrppol"/>. Make sure that each folder you
                have redirected is in the exclusion list.
                </para></step>

                <step><para>
                You are now ready to copy<footnote><para>
                        There is an alternate method by which a default user profile can be added to the
                        <constant>NETLOGON</constant> share. This facility in the Windows System tool 
                        permits profiles to be exported. The export target may be a particular user or 
                        group profile share point or else the <constant>NETLOGON</constant> share. 
                        In this case, the profile directory must be named <constant>Default User</constant>.
                        </para></footnote> 
                the Default User profile to the Samba domain controllers. Launch Microsoft Windows Explorer,
                and use it to copy the full contents of the directory <filename>Default User</filename> that
                is in the <filename>C:\Documents and Settings</filename> to the root directory of the
                <constant>NETLOGON</constant> share. If the <constant>NETLOGON</constant> share has the defined
                UNIX path of <filename>/var/lib/samba/netlogon</filename>, when the copy is complete there must
                be a directory in there called <filename>Default User</filename>.
                </para></step>

        </procedure>

        <para>
        Before punching out new desktop images for the client workstations, it is perhaps a good idea that
        desktop behavior should be returned to the original Microsoft settings. The following steps achieve
        that ojective:
        </para>

        <procedure>
        <title>Reset Folder Display to Original Behavior</title>

                <step><para>
                To launch the Windows Explorer, click
                        <menuchoice>
                                <guimenu>Start</guimenu>
                                <guimenuitem>My Computer</guimenuitem>
                                <guimenuitem>Tools</guimenuitem>
                                <guimenuitem>Folder Options</guimenuitem>
                                <guimenuitem>View Tab</guimenuitem>
                        </menuchoice>.
                Deselect <guilabel>Show hidden files and folders</guilabel>, and click <guibutton>OK</guibutton>.
                Exit Windows Explorer.
                </para></step>

        </procedure>

        <figure id="XP-screen001">
                <title>Windows XP Professional &smbmdash; User Shared Folders</title>
                <imagefile scale="65">XP-screen001</imagefile>
        </figure>

<table id="proffold">
        <title>Default Profile Redirections</title>
        <tgroup cols="2">
                <colspec align="left"/>
                <colspec align="left"/>
                <thead>
                        <row>
                                <entry>Registry Key</entry>
                                <entry>Redirected Value</entry>
                        </row>
                </thead>
                <tbody>
                        <row>
                                <entry>Cache</entry>
                                <entry>%LOGONSERVER%\profdata\%USERNAME%\InternetFiles</entry>
                        </row>
                        <row>
                                <entry>Cookies</entry>
                                <entry>%LOGONSERVER%\profdata\%USERNAME%\Cookies</entry>
                        </row>
                        <row>
                                <entry>History</entry>
                                <entry>%LOGONSERVER%\profdata\%USERNAME%\History</entry>
                        </row>
                        <row>
                                <entry>Local AppData</entry>
                                <entry>%LOGONSERVER%\profdata\%USERNAME%\AppData</entry>
                        </row>
                        <row>
                                <entry>Local Settings</entry>
                                <entry>%LOGONSERVER%\profdata\%USERNAME%\LocalSettings</entry>
                        </row>
                        <row>
                                <entry>My Pictures</entry>
                                <entry>%LOGONSERVER%\profdata\%USERNAME%\MyPictures</entry>
                        </row>
                        <row>
                                <entry>Personal</entry>
                                <entry>%LOGONSERVER%\profdata\%USERNAME%\MyDocuments</entry>
                        </row>
                        <row>
                                <entry>Recent</entry>
                                <entry>%LOGONSERVER%\profdata\%USERNAME%\Recent</entry>
                        </row>
                </tbody>
        </tgroup>
</table>

        </sect2>

        <sect2>
        <title>Configuration of MS Outlook to Relocate PST File</title>

        <para>
        <indexterm><primary>Outlook</primary><secondary>PST</secondary></indexterm>
        <indexterm><primary>MS Outlook</primary><secondary>PST</secondary></indexterm>
        Microsoft Outlook can store a Personal Storage file, generally known as a PST file.
        It is the nature of email storage that this file grows, at times quite rapidly.
        So that users' email is available to them at every workstation they may log onto,
        it is common practice in well-controlled sites to redirect the PST folder to the
        users' home directory. Follow these steps for each user who wishes to do this.
        </para>

        <para>
        To redirect the Outlook PST file in Outlook 2003 (older versions of Outlook behave
        slightly differently), follow these steps:
        </para>

        <procedure>
        <title>Outlook PST File Relocation</title>

                <step><para>
                Close Outlook if it is open.
                </para></step>

                <step><para>
                From the <guimenu>Control Panel</guimenu>, launch the Mail icon.
                </para></step>

                <step><para>
                Click <guimenu>Email Accounts.</guimenu>
                </para></step>

                <step><para>
                Make a note of the location of the PST file(s). From this location, move
                the files to the desired new target location. The most desired new target location 
                may well be the users' home directory.
                </para></step>

                <step><para>
                Add a new data file, selecting the PST file in the new desired target location.
                Give this entry (not the filename) a new name such as <quote>Personal Mail Folders.</quote>
                </para>

                <para>
                Note: If MS Outlook has been configured to use an IMAP account configuration there may be problems
                following these instructions. Feedback from users suggests that where IMAP is used the PST
                file is used to store rules and filters. When the PST store is relocated it appears to break
                MS Outlook's Send/Receive button. If anyone has sucessfully relocated PST files where IMAP is 
                used please email <literal>jht@samba.org</literal> with useful tips and suggestions so that
                this warning can be removed or modified.
                </para></step>

                <step><para>
                Close the <guimenu>Date Files</guimenu> windows, then click <guimenu>Email Accounts</guimenu>.
                </para></step>

                <step><para>
                Select <guimenu>View of Change</guimenu> exiting email accounts, click <guibutton>Next.</guibutton>
                </para></step>

                <step><para>
                Change the <guimenu>Mail Delivery Location</guimenu> so as to use the data file in the new
                target location.
                </para></step>

                <step><para>
                Go back to the <guimenu>Data Files</guimenu> window, then delete the old data file entry.
                </para></step>

        </procedure>
        
        <note><para>
        <indexterm><primary>Outlook Address Book</primary></indexterm>
        You may have to remove and reinstall the Outlook Address Book (Contacts) entries, otherwise 
        the user may be not be able to retrieve contacts when addressing a new email message.
        </para></note>

        <note><para>
        <indexterm><primary>Outlook Express</primary></indexterm>
        Outlook Express is not at all like MS OutLook. It stores file very differently also. Outlook
        Express storage files can not be redirected to network shares. The options panel will not permit
        this, but they can be moved to folders outside of the user's profile. They can also be excluded
        from folder synchronization as part of the roaming profile.
        </para>

        <para>
        While it is possible to redirect the data stores for Outlook Express data stores by editing the 
        registry, experience has shown that data corruption and loss of email messages will result.
        </para>

        <para>
        <indexterm><primary>Outlook Express</primary></indexterm>
        <indexterm><primary>MS Outlook</primary></indexterm>
        In the same vane as MS Outlook, Outlook Express data stores can become very large. When used with
        roaming profiles this can result in excruciatingly long login and logout behavior will files are
        synchronized. For this reason, it is highly recommended not to use Outlook Express where roaming
        profiles are used.
        </para></note>

        <para>
        <indexterm><primary>PST file</primary></indexterm>
        Microsoft does not support storing PST files on network shares, although the practice does appear
        to be rather popular. Anyone who does relocation the PST file to a network resource should refer
        the Microsoft <ulink url="http://support.microsoft.com/kb/297019/">reference</ulink> to better
        understand the issues.
        </para>

        <para>
        <indexterm><primary>PST file</primary></indexterm>
        Apart from manually moving PST files to a network share, it is possible to set the default PST
        location for new accounts by following the instructions at the WindowsITPro <ulink
        url="http://www.windowsitpro.com/Windows/Article/ArticleID/48228/48228.html">web</ulink> site.
        </para>

        <para>
        <indexterm><primary>PST file</primary></indexterm>
        User feedback suggests that disabling of oplocks on PST files will significantly improve
        network performance by reducing locking overheads. One way this can be done is to add to the
        &smb.conf; file stanza for the share the PST file the following:
<screen>
veto oplock files = /*.pdf/*.PST/
</screen>
        </para>

        </sect2>

        <sect2>
        <title>Configure Delete Cached Profiles on Logout</title>

        <para>
        Configure the Windows XP Professional client to auto-delete roaming profiles on logout:
        </para>

        <para>
        <indexterm><primary>MMC</primary></indexterm>
        Click 
        <menuchoice>
                <guimenu>Start</guimenu>
                <guimenuitem>Run</guimenuitem>
        </menuchoice>. In the dialog box, enter <command>MMC</command> and click <guibutton>OK</guibutton>.
        </para>

        <para>
        Follow these steps to set the default behavior of the staging machine so that all roaming
        profiles are deleted as network users log out of the system. Click
        <menuchoice>
                <guimenu>File</guimenu>
                <guimenuitem>Add/Remove Snap-in</guimenuitem>
                <guimenuitem>Add</guimenuitem>
                <guimenuitem>Group Policy</guimenuitem>
                <guimenuitem>Add</guimenuitem>
                <guimenuitem>Finish</guimenuitem>
                <guimenuitem>Close</guimenuitem>
                <guimenuitem>OK</guimenuitem>
        </menuchoice>. 
        </para>

        <para>
        <indexterm><primary>Microsoft Management Console</primary><see>MMC</see></indexterm>
        The Microsoft Management Console now shows the <guimenu>Group Policy</guimenu>
        utility that enables you to set the policies needed. In the left panel, click
        <menuchoice>
                <guimenuitem>Local Computer Policy</guimenuitem>
                <guimenuitem>Administrative Templates</guimenuitem>
                <guimenuitem>System</guimenuitem>
                <guimenuitem>User Profiles</guimenuitem>
        </menuchoice>. In the right panel, set the properties shown here by double-clicking on each
        item as shown:
        </para>

        <itemizedlist>
                <listitem><para>Do not check for user ownership of Roaming Profile Folders = Enabled</para></listitem>
                <listitem><para>Delete cached copies of roaming profiles = Enabled</para></listitem>
        </itemizedlist>

        <para>
        Close the Microsoft Management Console. The settings take immediate effect and persist onto all image copies
        made of this system to deploy the new standard desktop system.
        </para>

        </sect2>

        <sect2>
        <title>Uploading Printer Drivers to Samba Servers</title>

        <para>
        <indexterm><primary>printing</primary><secondary>drag-and-drop</secondary></indexterm>
        Users want to be able to use network printers. You have a vested interest in making
        it easy for them to print. You have chosen to install the printer drivers onto the Samba
        servers and to enable point-and-click (drag-and-drop) printing. This process results in
        Samba being able to automatically provide the Windows client with the driver necessary to
        print to the printer chosen. The following procedure must be followed for every network
        printer:
        </para>

        <procedure>
        <title>Steps to Install Printer Drivers on the Samba Servers</title>

                <step><para>
                Join your Windows XP Professional workstation (the staging machine) to the 
                <constant>MEGANET2</constant> domain. If you are not sure of the procedure, 
                follow the guidance given in <link linkend="appendix"/>, <link linkend="domjoin"/>.
                </para></step>

                <step><para>
                After the machine has rebooted, log onto the workstation as the domain
                <constant>root</constant> (this is the Administrator account for the 
                operating system that is the host platform for this implementation of Samba.
                </para></step>

                <step><para>
                Launch MS Windows Explorer. Navigate in the left panel. Click
                <menuchoice>
                        <guimenu>My Network Places</guimenu>
                        <guimenuitem>Entire Network</guimenuitem>
                        <guimenuitem>Microsoft Windows Network</guimenuitem>
                        <guimenuitem>Meganet2</guimenuitem>
                        <guimenuitem>Massive</guimenuitem>
                </menuchoice>. Click on <guimenu>Massive</guimenu>
                        <guimenu>Printers and Faxes</guimenu>.
                </para></step>

                <step><para>
                Identify a printer that is shown in the right panel. Let us assume the printer is called 
                <constant>ps01-color</constant>. Right-click on the <guimenu>ps01-color</guimenu> icon
                and select the <guimenu>Properties</guimenu> entry. This opens a dialog box that indicates
                that <quote>The printer driver is not installed on this computer. Some printer properties
                will not be accessible unless you install the printer driver. Do you want to install the
                driver now?</quote> It is important at this point you answer <guimenu>No</guimenu>.
                </para></step>

                <step><para>
                The printer properties panel for the <guimenu>ps01-color</guimenu> printer on the server 
                <constant>MASSIVE</constant> is displayed. Click the <guimenu>Advanced</guimenu> tab.
                Note that the box labeled <guimenu>Driver</guimenu> is empty. Click the <guimenu>New Driver</guimenu>
                button that is next to the <guimenu>Driver</guimenu> box. This launches the <quote>Add Printer Wizard</quote>.
                </para></step>

                <step><para>
                <indexterm><primary>Add Printer Wizard</primary><secondary>APW</secondary></indexterm>
                <indexterm><primary>APW</primary></indexterm>
                The <quote>Add Printer Driver Wizard on <constant>MASSIVE</constant></quote> panel 
                is now presented. Click <guimenu>Next</guimenu> to continue. From the left panel, select the 
                printer manufacturer. In your case, you are adding a driver for a printer manufactured by 
                Lexmark. In the right panel, select the printer (Lexmark Optra Color 40 PS). Click 
                <guimenu>Next</guimenu>, and then <guimenu>Finish</guimenu> to commence driver upload. A 
                progress bar appears and instructs you as each file is being uploaded and that it is being 
                directed at the network server <constant>\\massive\ps01-color</constant>.
                </para></step>

                <step><para>
                <indexterm><primary>printers</primary><secondary>Advanced</secondary></indexterm>
                <indexterm><primary>printers</primary><secondary>Properties</secondary></indexterm>
                <indexterm><primary>printers</primary><secondary>Sharing</secondary></indexterm>
                <indexterm><primary>printers</primary><secondary>General</secondary></indexterm>
                <indexterm><primary>printers</primary><secondary>Security</secondary></indexterm>
                <indexterm><primary>AD printer publishing</primary></indexterm>
                The driver upload completes in anywhere from a few seconds to a few minutes. When it completes,
                you are returned to the <guimenu>Advanced</guimenu> tab in the <guimenu>Properties</guimenu> panel. 
                You can set the Location (under the <guimenu>General</guimenu> tab) and Security settings (under 
                the <guimenu>Security</guimenu> tab). Under the <guimenu>Sharing</guimenu> tab it is possible to
                load additional printer drivers; there is also a check-box in this tab called <quote>List in the
                directory</quote>. When this box is checked, the printer will be published in Active Directory
                (Applicable to Active Directory use only.)
                </para></step>

                <step><para>
                <indexterm><primary>printers</primary><secondary>Default Settings</secondary></indexterm>
                Click <guimenu>OK</guimenu>. It will take a minute or so to upload the settings to the server. 
                You are now returned to the <guimenu>Printers and Faxes on Massive</guimenu> monitor.
                Right-click on the printer, click <menuchoice><guimenu>Properties</guimenu> 
                <guimenuitem>Device Settings</guimenuitem> </menuchoice>.  Now change the settings to suit 
                your requirements. BE CERTAIN TO CHANGE AT LEAST ONE SETTING and apply the changes even if 
                you need to reverse the changes back to their original settings. 
                </para></step>

                <step><para>
                This is necessary so that the printer settings are initialized in the Samba printers
                database. Click <guimenu>Apply</guimenu> to commit your settings. Revert any settings you changed
                just to initialize the Samba printers database entry for this printer. If you need to revert a setting,
                click <guimenu>Apply</guimenu> again.
                </para></step>

                <step><para>
                <indexterm><primary>Print Test Page</primary></indexterm>
                Verify that all printer settings are at the desired configuration. When you are satisfied that they are,
                click the <guimenu>General</guimenu> tab. Now click the <guimenu>Print Test Page</guimenu> button.
                A test page should print. Verify that it has printed correctly. Then click <guimenu>OK</guimenu>
                in the panel that is newly presented. Click <guimenu>OK</guimenu> on the <guimenu>ps01-color on 
                massive Properties</guimenu> panel.
                </para></step>

                <step><para>
                You must repeat this process for all network printers (i.e., for every printer on each server).
                When you have finished uploading drivers to all printers, close all applications. The next task
                is to install software your users require to do their work.
                </para></step>

        </procedure>

        </sect2>

        <sect2>
        <title>Software Installation</title>

        <para>
        Your network has both fixed desktop workstations as well as notebook computers. As a general rule, it is
        a good idea to not tamper with the operating system that is provided by the notebook computer manufacturer.
        Notebooks require special handling that is beyond the scope of this chapter.
        </para>

        <para>
        For desktop systems, the installation of software onto administratively centralized application servers
        make a lot of sense. This means that you can manage software maintenance from a central
        perspective and that only minimal application stubware needs to be installed onto the desktop
        systems. You should proceed with software installation and default configuration as far as is humanly
        possible and so long as it makes sense to do so. Make certain to thoroughly test and validate every aspect
        of software operations and configuration.
        </para>

        <para>
        When you believe that the overall configuration is complete, be sure to create a shared group profile
        and migrate that to the Samba server for later reuse when creating custom mandatory profiles, just in
        case a user may have specific needs you had not anticipated.
        </para>

        </sect2>

        <sect2>
        <title>Roll-out Image Creation</title>

        <para>
        The final steps before preparing the distribution Norton Ghost image file you might follow are:
        </para>

        <blockquote><para>
        Unjoin the domain &smbmdash; Each workstation requires a unique name and must be independently
        joined into domain membership.
        </para></blockquote>

        <blockquote><para>
        Defragment the hard disk &smbmdash; While not obvious to the uninitiated, defragmentation results
        in better performance and often significantly reduces the size of the compressed disk image. That
        also means it will take less time to deploy the image onto 500 workstations.
        </para></blockquote>

        </sect2>

</sect1>

<sect1>
        <title>Key Points Learned</title>

        <para>
        This chapter introduced many new concepts. Is it a sad fact that the example presented deliberately
        avoided any consideration of security. Security does not just happen; you must design it into your total
        network. Security begins with a systems design and implementation that anticipates hostile behavior from
        users both inside and outside the organization. Hostile and malicious intruders do not respect barriers;
        they accept them as challenges. For that reason, if not simply from a desire to establish safe networking
        practices, you must not deploy the design presented in this book in an environment where there is risk
        of compromise.
        </para>

        <para>
        <indexterm><primary>Access Control Lists</primary><see>ACLs</see></indexterm>
        <indexterm><primary>ACLs</primary></indexterm>
        As a minimum, the LDAP server must be protected by way of Access Control Lists (ACLs), and it must be
        configured to use secure protocols for all communications over the network. Of course, secure networking
        does not result just from systems design and implementation but involves constant user education
        training and, above all, disciplined attention to detail and constant searching for signs of unfriendly
        or alien activities. Security is itself a topic for a whole book. Please do consult appropriate sources.
        Jerry Carter's book <ulink url="http://www.booksense.com/product/info.jsp&amp;isbn=1565924916">
        <emphasis>LDAP System Administration</emphasis></ulink> is a good place to start reading about OpenLDAP
        as well as security considerations.
        </para>

        <para>
        The substance of this chapter that has been deserving of particular attention includes:
        </para>

        <itemizedlist>
                <listitem><para>
                Implementation of an OpenLDAP-based passwd backend, necessary to support distributed
                domain control.
                </para></listitem>

                <listitem><para>
                Implementation of Samba primary and secondary domain controllers with a common LDAP backend
                for user and group accounts that is shared with the UNIX system through the PADL nss_ldap and
                pam_ldap tool-sets.
                </para></listitem>

                <listitem><para>
                Use of the Idealx smbldap-tools scripts for UNIX (POSIX) account management as well as
                to manage Samba Windows user and group accounts.
                </para></listitem>

                <listitem><para>
                The basics of implementation of Group Policy controls for Windows network clients.
                </para></listitem>

                <listitem><para>
                Control over roaming profiles, with particular focus on folder redirection to network drives.
                </para></listitem>

                <listitem><para>
                Use of the CUPS printing system together with Samba-based printer driver auto-download.
                </para></listitem>
        </itemizedlist>

</sect1>


<sect1>
        <title>Questions and Answers</title>

        <para>
        Well, here we are at the end of this chapter and we have only ten questions to help you to
        remember so much. There are bound to be some sticky issues here.
        </para>

        <qandaset defaultlabel="chap06qa" type="number">
        <qandaentry>
        <question>

                <para>
                Why did you not cover secure practices? Isn't it rather irresponsible to instruct
                network administrators to implement insecure solutions?
                </para>

        </question>
        <answer>

                <para>
                Let's get this right. This is a book about Samba, not about OpenLDAP and secure
                communication protocols for subjects other than Samba. Earlier on, you note,
                that the dynamic DNS and DHCP solutions also used no protective secure communications
                protocols. The reason for this is simple: There are so many ways of implementing
                secure protocols that this book would have been even larger and more complex.
                </para>

                <para>
                The solutions presented here all work (at least they did for me). Network administrators
                have the interest and the need to be better trained and instructed in secure networking
                practices and ought to implement safe systems. I made the decision, right or wrong,
                to keep this material as simple as possible. The intent of this book is to demonstrate
                a working solution and not to discuss too many peripheral issues.
                </para>

                <para>
                This book makes little mention of backup techniques. Does that mean that I am recommending
                that you should implement a network without provision for data recovery and for disaster
                management? Back to our focus: The deployment of Samba has been clearly demonstrated.
                </para>

        </answer>
        </qandaentry>

        <qandaentry>
        <question>

                <para>
                You have focused much on SUSE Linux and little on the market leader, Red Hat. Do
                you have a problem with Red Hat Linux? Doesn't that make your guidance irrelevant
                to the Linux I might be using?
                </para>

        </question>
        <answer>

                <para>
                Both Red Hat Linux and SUSE Linux comply with the Linux Standards Base specifications
                for a standard Linux distribution. The differences are marginal. Surely you know
                your Linux platform, and you do have access to administration manuals for it. This
                book is not a Linux tutorial; it is a Samba tutorial. Let's keep the focus on
                the Samba part of the book; all the other bits are peripheral (but important) to
                creation of a total network solution. 
                </para>

                <para>
                What I find interesting is the attention reviewers give to Linux installation and to
                the look and feel of the desktop, but does that make for a great server? In this book,
                I have paid particular attention to the details of creating a whole solution framework.
                I have not tightened every nut and bolt, but I have touched on all the issues you
                need to be familiar with. Over the years many people have approached me wanting to
                know the details of exactly how to implement a DHCP and dynamic DNS server with Samba
                and WINS. In this chapter, it is plain to see what needs to be configured to provide
                transparent interoperability. Likewise for CUPS and Samba interoperation. These are
                key stumbling areas for many people.
                </para>

                <para>
                At every critical junction, I have provided comparative guidance for both SUSE and
                Red Hat Linux. Both manufacturers have done a great job in furthering the cause
                of open source software. I favor neither and respect both. I like particular
                features of both products (companies also). No bias in presentation is intended.
                Oh, before I forget, I particularly like Debian Linux; that is my favorite playground.
                </para>

        </answer>
        </qandaentry>

        <qandaentry>
        <question>

                <para>
                You did not use SWAT to configure Samba. Is there something wrong with it?
                </para>

        </question>
        <answer>

                <para>
                That is a good question. As it is, the &smb.conf; file configurations are presented
                in as direct a format as possible. Adding SWAT into the equation would have complicated
                matters. I sought simplicity of implementation. The fact is that I did use SWAT to
                create the files in the first place.
                </para>

                <para>
                There are people in the Linux and open source community who feel that SWAT is dangerous
                and insecure. Many will not touch it with a barge-pole. By not introducing SWAT, I
                hope to have brought their interests on board. SWAT is well covered is <emphasis>TOSHARG2</emphasis>.
                </para>

        </answer>
        </qandaentry>

        <qandaentry>
        <question>

                <para>
                You have exposed a well-used password <emphasis>not24get</emphasis>. Is that
                not irresponsible? 
                </para>

        </question>
        <answer>

                <para>
                Well, I had to use a password of some sort. At least this one has been consistently
                used throughout. I guess you can figure out that in a real deployment it would make 
                sense to use a more secure and original password.
                </para>

        </answer>
        </qandaentry>

        <qandaentry>
        <question>

                <para>
                The Idealx smbldap-tools create many domain group accounts that are not used. Is that
                a good thing?
                </para>

        </question>
        <answer>

                <para>
                I took this up with Idealx and found them most willing to change that in the next version.
                Let's give Idealx some credit for the contribution they have made. I appreciate their work
                and, besides, it does no harm to create accounts that are not now used &smbmdash; at some time 
                Samba may well use them.
                </para>

        </answer>
        </qandaentry>

        <qandaentry>
        <question>

                <para>
                Can I use LDAP just for Samba accounts and not for UNIX system accounts?
                </para>

        </question>
        <answer>

                <para>
                Yes, you can do that for user accounts only. Samba requires there to be a POSIX (UNIX)
                group account for every Windows domain group account. But if you put your users into
                the system password account, how do you plan to keep all domain controller system
                password files in sync? I think that having everything in LDAP makes a lot of sense
                for the UNIX administrator who is still learning the craft and is migrating from MS Windows.
                </para>

        </answer>
        </qandaentry>

        <qandaentry>
        <question>

                <para>
                Why are the Windows domain RID portions not the same as the UNIX UID?
                </para>

        </question>
        <answer>

                <para>
                Samba uses a well-known public algorithm for assigning RIDs from UIDs and GIDs.
                This algorithm ought to ensure that there will be no clashes with well-known RIDs.
                Well-known RIDs have special significance to MS Windows clients. The automatic
                assignment used the calculation: RID = UID x 2 + 1000. Of course, Samba does
                permit you to override that to some extent. See the &smb.conf; man page entry
                for <parameter>algorithmic rid base</parameter>.
                </para>

        </answer>
        </qandaentry>

        <qandaentry>
        <question>

                <para>
                Printer configuration examples all show printing to the HP port 9100. Does this
                mean that I must have HP printers for these solutions to work?
                </para>

        </question>
        <answer>

                <para>
                No. You can use any type of printer and must use the interfacing protocol supported
                by the printer. Many networks use LPR/LPD print servers to which are attached
                PCL printers, inkjet printers, plotters, and so on. At home I use a USB-attached
                inkjet printer. Use the appropriate device URI (Universal Resource Interface)
                argument to the <constant>lpadmin -v</constant> option that is right for your
                printer.
                </para>

        </answer>
        </qandaentry>

        <qandaentry>
        <question>

                <para>
                Is folder redirection dangerous? I've heard that you can lose your data that way.
                </para>

        </question>
        <answer>

                <para>
                The only loss of data I know of that involved folder redirection was caused by
                manual misuse of the redirection tool. The administrator redirected a folder to
                a network drive and said he wanted to migrate (move) the data over. Then he 
                changed his mind, so he moved the folder back to the roaming profile. This time,
                he declined to move the data because he thought it was still in the local profile
                folder. That was not the case, so by declining to move the data back, he wiped out
                the data. You cannot hold the tool responsible for that. Caveat emptor still applies.
                </para>

        </answer>
        </qandaentry>

        <qandaentry>
        <question>

                <para>
                Is it really necessary to set a local Group Policy to exclude the redirected
                folders from the roaming profile?
                </para>

        </question>
        <answer>

                <para>
                Yes. If you do not do this, the data will still be copied from the network folder
                (share) to the local cached copy of the profile.
                </para>

        </answer>
        </qandaentry>

        </qandaset>

</sect1>

</chapter>