selftest/Subunit.pm

   1 # Perl module for parsing and generating the Subunit protocol
   2 # Copyright (C) 2008-2009 Jelmer Vernooij <jelmer@samba.org>
   3 #
   4 # This program is free software; you can redistribute it and/or modify
   5 # it under the terms of the GNU General Public License as published by
   6 # the Free Software Foundation; either version 3 of the License, or
   7 # (at your option) any later version.
   8
   9 # This program is distributed in the hope that it will be useful,
  10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12 # GNU General Public License for more details.
  13
  14 # You should have received a copy of the GNU General Public License
  15 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
  16
  17 package Subunit;
  18 use POSIX;
  19
  20 require Exporter;
  21 @ISA = qw(Exporter);
  22 @EXPORT_OK = qw(parse_results);
  23
  24 use strict;
  25
  26 sub parse_results($$$)
  27 {
  28         my ($msg_ops, $statistics, $fh) = @_;
  29         my $expected_fail = 0;
  30         my $open_tests = [];
  31
  32         while(<$fh>) {
  33                 if (/^test: (.+)\n/) {
  34                         $msg_ops->control_msg($_);
  35                         $msg_ops->start_test($1);
  36                         push (@$open_tests, $1);
  37                 } elsif (/^time: (\d+)-(\d+)-(\d+) (\d+):(\d+):(\d+)\n/) {
  38                         $msg_ops->report_time(mktime($6, $5, $4, $3, $2-1, $1-1900));
  39                 } elsif (/^(success|successful|failure|fail|skip|knownfail|error|xfail|skip-testsuite|testsuite-failure|testsuite-xfail|testsuite-success|testsuite-error): (.*?)( \[)?([ \t]*)( multipart)?\n/) {
  40                         $msg_ops->control_msg($_);
  41                         my $result = $1;
  42                         my $testname = $2;
  43                         my $reason = undef;
  44                         if ($3) {
  45                                 $reason = "";
  46                                 # reason may be specified in next lines
  47                                 my $terminated = 0;
  48                                 while(<$fh>) {
  49                                         $msg_ops->control_msg($_);
  50                                         if ($_ eq "]\n") { $terminated = 1; last; } else { $reason .= $_; }
  51                                 }
  52
  53                                 unless ($terminated) {
  54                                         $statistics->{TESTS_ERROR}++;
  55                                         $msg_ops->end_test($testname, "error", 1,
  56                                                                "reason ($result) interrupted");
  57                                         return 1;
  58                                 }
  59                         }
  60                         if ($result eq "success" or $result eq "successful") {
  61                                 pop(@$open_tests); #FIXME: Check that popped value == $testname
  62                                 $statistics->{TESTS_EXPECTED_OK}++;
  63                                 $msg_ops->end_test($testname, "success", 0, $reason);
  64                         } elsif ($result eq "xfail" or $result eq "knownfail") {
  65                                 pop(@$open_tests); #FIXME: Check that popped value == $testname
  66                                 $statistics->{TESTS_EXPECTED_FAIL}++;
  67                                 $msg_ops->end_test($testname, "xfail", 0, $reason);
  68                                 $expected_fail++;
  69                         } elsif ($result eq "failure" or $result eq "fail") {
  70                                 pop(@$open_tests); #FIXME: Check that popped value == $testname
  71                                 $statistics->{TESTS_UNEXPECTED_FAIL}++;
  72                                 $msg_ops->end_test($testname, "failure", 1, $reason);
  73                         } elsif ($result eq "skip") {
  74                                 $statistics->{TESTS_SKIP}++;
  75                                 # Allow tests to be skipped without prior announcement of test
  76                                 my $last = pop(@$open_tests);
  77                                 if (defined($last) and $last ne $testname) {
  78                                         push (@$open_tests, $testname);
  79                                 }
  80                                 $msg_ops->end_test($testname, "skip", 0, $reason);
  81                         } elsif ($result eq "error") {
  82                                 $statistics->{TESTS_ERROR}++;
  83                                 pop(@$open_tests); #FIXME: Check that popped value == $testname
  84                                 $msg_ops->end_test($testname, "error", 1, $reason);
  85                         } elsif ($result eq "skip-testsuite") {
  86                                 $msg_ops->skip_testsuite($testname);
  87                         } elsif ($result eq "testsuite-success") {
  88                                 $msg_ops->end_testsuite($testname, "success", $reason);
  89                         } elsif ($result eq "testsuite-failure") {
  90                                 $msg_ops->end_testsuite($testname, "failure", $reason);
  91                         } elsif ($result eq "testsuite-xfail") {
  92                                 $msg_ops->end_testsuite($testname, "xfail", $reason);
  93                         } elsif ($result eq "testsuite-error") {
  94                                 $msg_ops->end_testsuite($testname, "error", $reason);
  95                         }
  96                 } elsif (/^testsuite: (.*)\n/) {
  97                         $msg_ops->start_testsuite($1);
  98                 } elsif (/^testsuite-count: (\d+)\n/) {
  99                         $msg_ops->testsuite_count($1);
 100                 } else {
 101                         $msg_ops->output_msg($_);
 102                 }
 103         }
 104
 105         while ($#$open_tests+1 > 0) {
 106                 $msg_ops->end_test(pop(@$open_tests), "error", 1,
 107                                    "was started but never finished!");
 108                 $statistics->{TESTS_ERROR}++;
 109         }
 110
 111         # if the Filter module is in use, it will have the right counts
 112         if (defined($msg_ops->{total_error})) {
 113                 $statistics->{TESTS_ERROR} = $msg_ops->{total_error};
 114                 $statistics->{TESTS_UNEXPECTED_FAIL} = $msg_ops->{total_fail};
 115                 $statistics->{TESTS_EXPECTED_FAIL} = $msg_ops->{total_xfail};
 116         }
 117
 118         return 1 if $statistics->{TESTS_ERROR} > 0;
 119         return 1 if $statistics->{TESTS_UNEXPECTED_FAIL} > 0;
 120
 121         return 0;
 122 }
 123
 124 sub start_test($)
 125 {
 126         my ($testname) = @_;
 127         print "test: $testname\n";
 128 }
 129
 130 sub end_test($$;$)
 131 {
 132         my $name = shift;
 133         my $result = shift;
 134         my $reason = shift;
 135         if ($reason) {
 136                 print "$result: $name [\n";
 137                 print "$reason";
 138                 print "]\n";
 139         } else {
 140                 print "$result: $name\n";
 141         }
 142 }
 143
 144 sub skip_test($;$)
 145 {
 146         my $name = shift;
 147         my $reason = shift;
 148         end_test($name, "skip", $reason);
 149 }
 150
 151 sub fail_test($;$)
 152 {
 153         my $name = shift;
 154         my $reason = shift;
 155         end_test($name, "fail", $reason);
 156 }
 157
 158 sub success_test($;$)
 159 {
 160         my $name = shift;
 161         my $reason = shift;
 162         end_test($name, "success", $reason);
 163 }
 164
 165 sub xfail_test($;$)
 166 {
 167         my $name = shift;
 168         my $reason = shift;
 169         end_test($name, "xfail", $reason);
 170 }
 171
 172 sub report_time($)
 173 {
 174         my ($time) = @_;
 175         my ($sec, $min, $hour, $mday, $mon, $year, $wday, $yday, $isdst) = localtime($time);
 176         printf "time: %04d-%02d-%02d %02d:%02d:%02d\n", $year+1900, $mon+1, $mday, $hour, $min, $sec;
 177 }
 178
 179 # The following are Samba extensions:
 180
 181 sub start_testsuite($)
 182 {
 183         my ($name) = @_;
 184         print "testsuite: $name\n";
 185 }
 186
 187 sub skip_testsuite($;$)
 188 {
 189         my ($name, $reason) = @_;
 190         if ($reason) {
 191                 print "skip-testsuite: $name [\n$reason\n]\n";
 192         } else {
 193                 print "skip-testsuite: $name\n";
 194         }
 195 }
 196
 197 sub end_testsuite($$;$)
 198 {
 199         my $name = shift;
 200         my $result = shift;
 201         my $reason = shift;
 202         if ($reason) {
 203                 print "testsuite-$result: $name [\n";
 204                 print "$reason\n";
 205                 print "]\n";
 206         } else {
 207                 print "testsuite-$result: $name\n";
 208         }
 209 }
 210
 211 sub testsuite_count($)
 212 {
 213         my ($count) = @_;
 214         print "testsuite-count: $count\n";
 215 }
 216
 217 1;