2 Unix SMB/CIFS implementation.
3 SMB parameters and setup, plus a whole lot more.
5 Copyright (C) Andrew Tridgell 1992-2000
6 Copyright (C) John H Terpstra 1996-2002
7 Copyright (C) Luke Kenneth Casson Leighton 1996-2000
8 Copyright (C) Paul Ashton 1998-2000
9 Copyright (C) Simo Sorce 2001-2002
10 Copyright (C) Martin Pool 2002
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 2 of the License, or
15 (at your option) any later version.
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
22 You should have received a copy of the GNU General Public License
23 along with this program; if not, write to the Free Software
24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
30 #if defined(LARGE_SMB_OFF_T)
31 #define BUFFER_SIZE (128*1024)
32 #else /* no large readwrite possible */
33 #define BUFFER_SIZE (0xFFFF)
36 #define SAFETY_MARGIN 1024
37 #define LARGE_WRITEX_HDR_SIZE 65
40 #define DGRAM_PORT 138
43 #define SMB_PORTS "445 139"
45 #define Undefined (-1)
53 #define _BOOL /* So we don't typedef BOOL again in vfs.h */
56 /* limiting size of ipc replies */
57 #define REALLOC(ptr,size) Realloc(ptr,MAX((size),4*1024))
61 #ifndef DEF_CREATE_MASK
62 #define DEF_CREATE_MASK (0755)
65 /* string manipulation flags - see clistr.c and srvstr.c */
66 #define STR_TERMINATE 1
70 #define STR_NOALIGN 16
71 #define STR_TERMINATE_ASCII 128
73 /* how long to wait for secondary SMB packets (milli-seconds) */
74 #define SMB_SECONDARY_WAIT (60*1000)
79 /* this defines the error codes that receive_smb can put in smb_read_error */
80 #define READ_TIMEOUT 1
83 #define WRITE_ERROR 4 /* This error code can go into the client smb_rw_error. */
84 #define READ_BAD_SIG 5
86 #define DIR_STRUCT_SIZE 43
88 /* these define the attribute byte as seen by DOS */
89 #define aRONLY (1L<<0) /* 0x01 */
90 #define aHIDDEN (1L<<1) /* 0x02 */
91 #define aSYSTEM (1L<<2) /* 0x04 */
92 #define aVOLID (1L<<3) /* 0x08 */
93 #define aDIR (1L<<4) /* 0x10 */
94 #define aARCH (1L<<5) /* 0x20 */
105 #define DOS_OPEN_RDONLY 0
106 #define DOS_OPEN_WRONLY 1
107 #define DOS_OPEN_RDWR 2
108 #define DOS_OPEN_FCB 0xF
110 /* define shifts and masks for share and open modes. */
111 #define OPEN_MODE_MASK 0xF
112 #define SHARE_MODE_SHIFT 4
113 #define SHARE_MODE_MASK 0x7
114 #define GET_OPEN_MODE(x) ((x) & OPEN_MODE_MASK)
115 #define SET_OPEN_MODE(x) ((x) & OPEN_MODE_MASK)
116 #define GET_DENY_MODE(x) (((x)>>SHARE_MODE_SHIFT) & SHARE_MODE_MASK)
117 #define SET_DENY_MODE(x) (((x) & SHARE_MODE_MASK) <<SHARE_MODE_SHIFT)
119 /* Sync on open file (not sure if used anymore... ?) */
120 #define FILE_SYNC_OPENMODE (1<<14)
121 #define GET_FILE_SYNC_OPENMODE(x) (((x) & FILE_SYNC_OPENMODE) ? True : False)
123 /* allow delete on open file mode (used by NT SMB's). */
124 #define ALLOW_SHARE_DELETE (1<<15)
125 #define GET_ALLOW_SHARE_DELETE(x) (((x) & ALLOW_SHARE_DELETE) ? True : False)
126 #define SET_ALLOW_SHARE_DELETE(x) ((x) ? ALLOW_SHARE_DELETE : 0)
128 /* delete on close flag (used by NT SMB's). */
129 #define DELETE_ON_CLOSE_FLAG (1<<16)
130 #define GET_DELETE_ON_CLOSE_FLAG(x) (((x) & DELETE_ON_CLOSE_FLAG) ? True : False)
131 #define SET_DELETE_ON_CLOSE_FLAG(x) ((x) ? DELETE_ON_CLOSE_FLAG : 0)
133 /* open disposition values */
134 #define FILE_EXISTS_FAIL 0
135 #define FILE_EXISTS_OPEN 1
136 #define FILE_EXISTS_TRUNCATE 2
138 /* mask for open disposition. */
139 #define FILE_OPEN_MASK 0x3
141 #define GET_FILE_OPEN_DISPOSITION(x) ((x) & FILE_OPEN_MASK)
142 #define SET_FILE_OPEN_DISPOSITION(x) ((x) & FILE_OPEN_MASK)
144 /* The above can be OR'ed with... */
145 #define FILE_CREATE_IF_NOT_EXIST 0x10
146 #define FILE_FAIL_IF_NOT_EXIST 0
148 #define GET_FILE_CREATE_DISPOSITION(x) ((x) & (FILE_CREATE_IF_NOT_EXIST|FILE_FAIL_IF_NOT_EXIST))
151 #define STYPE_DISKTREE 0 /* Disk drive */
152 #define STYPE_PRINTQ 1 /* Spooler queue */
153 #define STYPE_DEVICE 2 /* Serial device */
154 #define STYPE_IPC 3 /* Interprocess communication (IPC) */
155 #define STYPE_HIDDEN 0x80000000 /* share is a hidden one (ends with $) */
159 typedef union unid_t
{
165 * SMB UCS2 (16-bit unicode) internal type.
168 typedef uint16 smb_ucs2_t
;
170 /* ucs2 string types. */
171 typedef smb_ucs2_t wpstring
[PSTRING_LEN
];
172 typedef smb_ucs2_t wfstring
[FSTRING_LEN
];
174 #ifdef WORDS_BIGENDIAN
180 /* turn a 7 bit character into a ucs2 character */
181 #define UCS2_CHAR(c) ((c) << UCS2_SHIFT)
183 /* pipe string names */
184 #define PIPE_LANMAN "\\PIPE\\LANMAN"
185 #define PIPE_SRVSVC "\\PIPE\\srvsvc"
186 #define PIPE_SAMR "\\PIPE\\samr"
187 #define PIPE_WINREG "\\PIPE\\winreg"
188 #define PIPE_WKSSVC "\\PIPE\\wkssvc"
189 #define PIPE_NETLOGON "\\PIPE\\NETLOGON"
190 #define PIPE_NTLSA "\\PIPE\\ntlsa"
191 #define PIPE_NTSVCS "\\PIPE\\ntsvcs"
192 #define PIPE_LSASS "\\PIPE\\lsass"
193 #define PIPE_LSARPC "\\PIPE\\lsarpc"
194 #define PIPE_SPOOLSS "\\PIPE\\spoolss"
195 #define PIPE_NETDFS "\\PIPE\\netdfs"
196 #define PIPE_ECHO "\\PIPE\\rpcecho"
197 #define PIPE_SHUTDOWN "\\PIPE\\initshutdown"
199 #define PIPE_NETLOGON_PLAIN "\\NETLOGON"
202 #define PI_LSARPC_DS 1
204 #define PI_NETLOGON 3
211 #define PI_SHUTDOWN 10
212 #define PI_MAX_PIPES 11
214 /* 64 bit time (100usec) since ????? - cifs6.txt, section 3.5, page 30 */
215 typedef struct nttime_info
222 /* Allowable account control bits */
223 #define ACB_DISABLED 0x0001 /* 1 = User account disabled */
224 #define ACB_HOMDIRREQ 0x0002 /* 1 = Home directory required */
225 #define ACB_PWNOTREQ 0x0004 /* 1 = User password not required */
226 #define ACB_TEMPDUP 0x0008 /* 1 = Temporary duplicate account */
227 #define ACB_NORMAL 0x0010 /* 1 = Normal user account */
228 #define ACB_MNS 0x0020 /* 1 = MNS logon user account */
229 #define ACB_DOMTRUST 0x0040 /* 1 = Interdomain trust account */
230 #define ACB_WSTRUST 0x0080 /* 1 = Workstation trust account */
231 #define ACB_SVRTRUST 0x0100 /* 1 = Server trust account */
232 #define ACB_PWNOEXP 0x0200 /* 1 = User password does not expire */
233 #define ACB_AUTOLOCK 0x0400 /* 1 = Account auto locked */
235 #define MAX_HOURS_LEN 32
238 * window during which we must talk to the PDC to avoid
239 * sam sync delays; expressed in seconds (15 minutes is the
240 * default period for SAM replication under Windows NT 4.0
242 #define SAM_SYNC_WINDOW 900
246 #define MAXSUBAUTHS 15 /* max sub authorities in a SID */
249 #define SID_MAX_SIZE ((size_t)(8+(MAXSUBAUTHS*4)))
254 SID_NAME_USE_NONE
= 0,
255 SID_NAME_USER
= 1, /* user */
256 SID_NAME_DOM_GRP
, /* domain group */
257 SID_NAME_DOMAIN
, /* domain sid */
258 SID_NAME_ALIAS
, /* local group */
259 SID_NAME_WKN_GRP
, /* well-known group */
260 SID_NAME_DELETED
, /* deleted account: needed for c2 rating */
261 SID_NAME_INVALID
, /* invalid account */
262 SID_NAME_UNKNOWN
, /* unknown sid type */
263 SID_NAME_COMPUTER
/* sid for a computer */
267 * @brief Security Identifier
269 * @sa http://msdn.microsoft.com/library/default.asp?url=/library/en-us/security/accctrl_38yn.asp
271 typedef struct sid_info
273 uint8 sid_rev_num
; /**< SID revision number */
274 uint8 num_auths
; /**< Number of sub-authorities */
275 uint8 id_auth
[6]; /**< Identifier Authority */
277 * Pointer to sub-authorities.
279 * @note The values in these uint32's are in *native* byteorder, not
280 * neccessarily little-endian...... JRA.
282 uint32 sub_auths
[MAXSUBAUTHS
];
287 * The complete list of SIDS belonging to this user.
288 * Created when a vuid is registered.
289 * The definition of the user_sids array is as follows :
291 * token->user_sids[0] = primary user SID.
292 * token->user_sids[1] = primary group SID.
293 * token->user_sids[2..num_sids] = supplementary group SIDS.
296 #define PRIMARY_USER_SID_INDEX 0
297 #define PRIMARY_GROUP_SID_INDEX 1
299 typedef struct _nt_user_token
{
304 /*** query a local group, get a list of these: shows who is in that group ***/
306 /* local group member info */
307 typedef struct local_grp_member_info
309 DOM_SID sid
; /* matches with name */
310 uint8 sid_use
; /* usr=1 grp=2 dom=3 alias=4 wkng=5 del=6 inv=7 unk=8 */
311 fstring name
; /* matches with sid: must be of the form "DOMAIN\account" */
315 /* enumerate these to get list of local groups */
317 /* local group info */
318 typedef struct local_grp_info
325 /*** enumerate these to get list of domain groups ***/
327 /* domain group member info */
328 typedef struct domain_grp_info
332 uint32 rid
; /* group rid */
333 uint8 attr
; /* attributes forced to be set to 0x7: SE_GROUP_xxx */
337 /*** query a domain group, get a list of these: shows who is in that group ***/
339 /* domain group info */
340 typedef struct domain_grp_member_info
343 uint8 attr
; /* attributes forced to be set to 0x7: SE_GROUP_xxx */
347 /* 32 bit time (sec) since 01jan1970 - cifs6.txt, section 3.5, page 30 */
348 typedef struct time_info
353 /* Structure used when SMBwritebmpx is active */
356 size_t wr_total_written
; /* So we know when to discard this */
359 int32 wr_error
; /* Cached errors */
360 BOOL wr_mode
; /* write through mode) */
361 BOOL wr_discard
; /* discard all further data */
364 typedef struct write_cache
375 smb_ucs2_t
*origname
;
376 smb_ucs2_t
*filename
;
377 SMB_STRUCT_STAT
*statinfo
;
380 #include "fake_file.h"
382 typedef struct files_struct
384 struct files_struct
*next
, *prev
;
386 struct connection_struct
*conn
;
388 uint16 rap_print_jobid
;
391 BOOL delete_on_close
;
394 SMB_BIG_UINT initial_allocation_size
; /* Faked up initial allocation on disk. */
395 SMB_BIG_UINT position_information
;
399 write_bmpx_struct
*wbmpx_ptr
;
401 struct timeval open_time
;
403 uint32 desired_access
;
404 time_t pending_modtime
;
406 int sent_oplock_break
;
407 unsigned long file_id
;
415 BOOL directory_delete_on_close
;
417 FAKE_FILE_HANDLE
*fake_file_handle
;
420 #include "ntquotas.h"
421 #include "sysquotas.h"
423 /* used to hold an arbitrary blob of data */
424 typedef struct data_blob
428 void (*free
)(struct data_blob
*data_blob
);
432 * Structure used to keep directory state information around.
433 * Used in NT change-notify code.
442 struct vuid_cache_entry
451 unsigned int entries
;
452 struct vuid_cache_entry array
[VUID_CACHE_SIZE
];
459 } name_compare_entry
;
461 /* Include VFS stuff */
463 #include "smb_acls.h"
466 typedef struct connection_struct
468 struct connection_struct
*next
, *prev
;
470 unsigned cnum
; /* an index passed over the wire */
474 struct vuid_cache vuid_cache
;
478 BOOL read_only
; /* Attributes for the current user of the share. */
479 BOOL admin_user
; /* Attributes for the current user of the share. */
484 struct vfs_ops vfs
; /* Filesystem operations */
485 struct vfs_ops vfs_opaque
; /* OPAQUE Filesystem operations */
486 struct vfs_handle_struct
*vfs_handles
; /* for the new plugins */
488 char *user
; /* name of user who *opened* this connection */
489 uid_t uid
; /* uid of user who *opened* this connection */
490 gid_t gid
; /* gid of user who *opened* this connection */
491 char client_address
[18]; /* String version of client IP address. */
493 uint16 vuid
; /* vuid of user who *opened* this connection, or UID_FIELD_INVALID */
495 /* following groups stuff added by ih */
497 /* This groups info is valid for the user that *opened* the connection */
500 NT_USER_TOKEN
*nt_user_token
;
505 name_compare_entry
*hide_list
; /* Per-share list of files to return as hidden. */
506 name_compare_entry
*veto_list
; /* Per-share list of files to veto (never show). */
507 name_compare_entry
*veto_oplock_list
; /* Per-share list of files to refuse oplocks on. */
513 connection_struct
*conn
;
519 NT_USER_TOKEN
*nt_user_token
;
522 /* Defines for the sent_oplock_break field above. */
523 #define NO_BREAK_SENT 0
524 #define EXCLUSIVE_BREAK_SENT 1
525 #define LEVEL_II_BREAK_SENT 2
528 fstring smb_name
; /* user name from the client */
529 fstring unix_name
; /* unix user name of a validated user */
530 fstring full_name
; /* to store full name (such as "Joe Bloggs") from gecos field of password file */
531 fstring domain
; /* domain that the client specified */
534 /* Extra fields above "LPQ_PRINTING" are used to map extra NT status codes. */
536 enum {LPQ_QUEUED
=0,LPQ_PAUSED
,LPQ_SPOOLING
,LPQ_PRINTING
,LPQ_ERROR
,LPQ_DELETING
,
537 LPQ_OFFLINE
,LPQ_PAPEROUT
,LPQ_PRINTED
,LPQ_DELETED
,LPQ_BLOCKED
,LPQ_USER_INTERVENTION
};
539 typedef struct _print_queue_struct
541 int job
; /* normally the SMB jobid -- see note in
542 printing.c:traverse_fn_delete() */
550 } print_queue_struct
;
552 enum {LPSTAT_OK
, LPSTAT_STOPPED
, LPSTAT_ERROR
};
559 } print_status_struct
;
561 /* used for server information: client, nameserv and ipc */
562 struct server_info_struct
567 fstring domain
; /* used ONLY in ipc.c NOT namework.c */
568 BOOL server_added
; /* used ONLY in ipc.c NOT namework.c */
572 /* used for network interfaces */
575 struct interface
*next
, *prev
;
577 struct in_addr bcast
;
578 struct in_addr nmask
;
581 /* struct returned by get_share_modes */
587 uint32 desired_access
;
591 unsigned long share_file_id
;
595 #define SHAREMODE_FN_CAST() \
596 void (*)(share_mode_entry *, char*)
598 #define SHAREMODE_FN(fn) \
599 void (*fn)(share_mode_entry *, char*)
601 #define NT_HASH_LEN 16
602 #define LM_HASH_LEN 16
605 * Flags for account policy.
607 #define AP_MIN_PASSWORD_LEN 1
608 #define AP_PASSWORD_HISTORY 2
609 #define AP_USER_MUST_LOGON_TO_CHG_PASS 3
610 #define AP_MAX_PASSWORD_AGE 4
611 #define AP_MIN_PASSWORD_AGE 5
612 #define AP_LOCK_ACCOUNT_DURATION 6
613 #define AP_RESET_COUNT_TIME 7
614 #define AP_BAD_ATTEMPT_LOCKOUT 8
615 #define AP_TIME_TO_LOGOUT 9
619 * Flags for local user manipulation.
622 #define LOCAL_ADD_USER 0x1
623 #define LOCAL_DELETE_USER 0x2
624 #define LOCAL_DISABLE_USER 0x4
625 #define LOCAL_ENABLE_USER 0x8
626 #define LOCAL_TRUST_ACCOUNT 0x10
627 #define LOCAL_SET_NO_PASSWORD 0x20
628 #define LOCAL_SET_PASSWORD 0x40
629 #define LOCAL_SET_LDAP_ADMIN_PW 0x80
630 #define LOCAL_INTERDOM_ACCOUNT 0x100
631 #define LOCAL_AM_ROOT 0x200 /* Act as root */
633 /* key and data in the connections database - used in smbstatus and smbd */
634 struct connections_key
{
640 struct connections_data
{
648 char machine
[FSTRING_LEN
];
650 uint32 bcast_msg_flags
;
654 /* key and data records in the tdb locking database */
660 struct locking_data
{
662 int num_share_mode_entries
;
663 share_mode_entry dummy
; /* Needed for alignment. */
665 /* the following two entries are implicit
666 share_mode_entry modes[num_share_mode_entries];
672 /* the following are used by loadparm for option lists */
675 P_BOOL
,P_BOOLREV
,P_CHAR
,P_INTEGER
,P_OCTAL
,P_LIST
,
676 P_STRING
,P_USTRING
,P_GSTRING
,P_UGSTRING
,P_ENUM
,P_SEP
681 P_LOCAL
,P_GLOBAL
,P_SEPARATOR
,P_NONE
684 /* passed to br lock code */
685 enum brl_type
{READ_LOCK
, WRITE_LOCK
, PENDING_LOCK
};
692 #define BRLOCK_FN_CAST() \
693 void (*)(SMB_DEV_T dev, SMB_INO_T ino, int pid, \
694 enum brl_type lock_type, \
695 br_off start, br_off size)
696 #define BRLOCK_FN(fn) \
697 void (*fn)(SMB_DEV_T dev, SMB_INO_T ino, int pid, \
698 enum brl_type lock_type, \
699 br_off start, br_off size)
706 BOOL (*special
)(const char *, char **);
707 const struct enum_list
*enum_list
;
723 /* The following flags are used in SWAT */
724 #define FLAG_BASIC 0x0001 /* Display only in BASIC view */
725 #define FLAG_SHARE 0x0002 /* file sharing options */
726 #define FLAG_PRINT 0x0004 /* printing options */
727 #define FLAG_GLOBAL 0x0008 /* local options that should be globally settable in SWAT */
728 #define FLAG_WIZARD 0x0010 /* Parameters that the wizard will operate on */
729 #define FLAG_ADVANCED 0x0020 /* Parameters that will be visible in advanced view */
730 #define FLAG_DEVELOPER 0x0040 /* No longer used */
731 #define FLAG_DEPRECATED 0x1000 /* options that should no longer be used */
732 #define FLAG_HIDE 0x2000 /* options that should be hidden in SWAT */
733 #define FLAG_DOS_STRING 0x4000 /* convert from UNIX to DOS codepage when reading this string. */
735 #ifndef LOCKING_VERSION
736 #define LOCKING_VERSION 4
737 #endif /* LOCKING_VERSION */
740 /* the basic packet size, assuming no words or bytes */
743 /* offsets into message for common items */
750 #define smb_pidhigh 16
751 #define smb_ss_field 18
777 /* flag defines. CIFS spec 3.1.1 */
778 #define FLAG_SUPPORT_LOCKREAD 0x01
779 #define FLAG_CLIENT_BUF_AVAIL 0x02
780 #define FLAG_RESERVED 0x04
781 #define FLAG_CASELESS_PATHNAMES 0x08
782 #define FLAG_CANONICAL_PATHNAMES 0x10
783 #define FLAG_REQUEST_OPLOCK 0x20
784 #define FLAG_REQUEST_BATCH_OPLOCK 0x40
785 #define FLAG_REPLY 0x80
788 #define SMBmkdir 0x00 /* create directory */
789 #define SMBrmdir 0x01 /* delete directory */
790 #define SMBopen 0x02 /* open file */
791 #define SMBcreate 0x03 /* create file */
792 #define SMBclose 0x04 /* close file */
793 #define SMBflush 0x05 /* flush file */
794 #define SMBunlink 0x06 /* delete file */
795 #define SMBmv 0x07 /* rename file */
796 #define SMBgetatr 0x08 /* get file attributes */
797 #define SMBsetatr 0x09 /* set file attributes */
798 #define SMBread 0x0A /* read from file */
799 #define SMBwrite 0x0B /* write to file */
800 #define SMBlock 0x0C /* lock byte range */
801 #define SMBunlock 0x0D /* unlock byte range */
802 #define SMBctemp 0x0E /* create temporary file */
803 #define SMBmknew 0x0F /* make new file */
804 #define SMBchkpth 0x10 /* check directory path */
805 #define SMBexit 0x11 /* process exit */
806 #define SMBlseek 0x12 /* seek */
807 #define SMBtcon 0x70 /* tree connect */
808 #define SMBtconX 0x75 /* tree connect and X*/
809 #define SMBtdis 0x71 /* tree disconnect */
810 #define SMBnegprot 0x72 /* negotiate protocol */
811 #define SMBdskattr 0x80 /* get disk attributes */
812 #define SMBsearch 0x81 /* search directory */
813 #define SMBsplopen 0xC0 /* open print spool file */
814 #define SMBsplwr 0xC1 /* write to print spool file */
815 #define SMBsplclose 0xC2 /* close print spool file */
816 #define SMBsplretq 0xC3 /* return print queue */
817 #define SMBsends 0xD0 /* send single block message */
818 #define SMBsendb 0xD1 /* send broadcast message */
819 #define SMBfwdname 0xD2 /* forward user name */
820 #define SMBcancelf 0xD3 /* cancel forward */
821 #define SMBgetmac 0xD4 /* get machine name */
822 #define SMBsendstrt 0xD5 /* send start of multi-block message */
823 #define SMBsendend 0xD6 /* send end of multi-block message */
824 #define SMBsendtxt 0xD7 /* send text of multi-block message */
827 #define SMBlockread 0x13 /* Lock a range and read */
828 #define SMBwriteunlock 0x14 /* Unlock a range then write */
829 #define SMBreadbraw 0x1a /* read a block of data with no smb header */
830 #define SMBwritebraw 0x1d /* write a block of data with no smb header */
831 #define SMBwritec 0x20 /* secondary write request */
832 #define SMBwriteclose 0x2c /* write a file then close it */
834 /* dos extended protocol */
835 #define SMBreadBraw 0x1A /* read block raw */
836 #define SMBreadBmpx 0x1B /* read block multiplexed */
837 #define SMBreadBs 0x1C /* read block (secondary response) */
838 #define SMBwriteBraw 0x1D /* write block raw */
839 #define SMBwriteBmpx 0x1E /* write block multiplexed */
840 #define SMBwriteBs 0x1F /* write block (secondary request) */
841 #define SMBwriteC 0x20 /* write complete response */
842 #define SMBsetattrE 0x22 /* set file attributes expanded */
843 #define SMBgetattrE 0x23 /* get file attributes expanded */
844 #define SMBlockingX 0x24 /* lock/unlock byte ranges and X */
845 #define SMBtrans 0x25 /* transaction - name, bytes in/out */
846 #define SMBtranss 0x26 /* transaction (secondary request/response) */
847 #define SMBioctl 0x27 /* IOCTL */
848 #define SMBioctls 0x28 /* IOCTL (secondary request/response) */
849 #define SMBcopy 0x29 /* copy */
850 #define SMBmove 0x2A /* move */
851 #define SMBecho 0x2B /* echo */
852 #define SMBopenX 0x2D /* open and X */
853 #define SMBreadX 0x2E /* read and X */
854 #define SMBwriteX 0x2F /* write and X */
855 #define SMBsesssetupX 0x73 /* Session Set Up & X (including User Logon) */
856 #define SMBffirst 0x82 /* find first */
857 #define SMBfunique 0x83 /* find unique */
858 #define SMBfclose 0x84 /* find close */
859 #define SMBkeepalive 0x85 /* keepalive */
860 #define SMBinvalid 0xFE /* invalid command */
862 /* Extended 2.0 protocol */
863 #define SMBtrans2 0x32 /* TRANS2 protocol set */
864 #define SMBtranss2 0x33 /* TRANS2 protocol set, secondary command */
865 #define SMBfindclose 0x34 /* Terminate a TRANSACT2_FINDFIRST */
866 #define SMBfindnclose 0x35 /* Terminate a TRANSACT2_FINDNOTIFYFIRST */
867 #define SMBulogoffX 0x74 /* user logoff */
869 /* NT SMB extensions. */
870 #define SMBnttrans 0xA0 /* NT transact */
871 #define SMBnttranss 0xA1 /* NT transact secondary */
872 #define SMBntcreateX 0xA2 /* NT create and X */
873 #define SMBntcancel 0xA4 /* NT cancel */
874 #define SMBntrename 0xA5 /* NT rename */
876 /* These are the trans subcommands */
877 #define TRANSACT_SETNAMEDPIPEHANDLESTATE 0x01
878 #define TRANSACT_DCERPCCMD 0x26
879 #define TRANSACT_WAITNAMEDPIPEHANDLESTATE 0x53
881 /* These are the TRANS2 sub commands */
882 #define TRANSACT2_OPEN 0x00
883 #define TRANSACT2_FINDFIRST 0x01
884 #define TRANSACT2_FINDNEXT 0x02
885 #define TRANSACT2_QFSINFO 0x03
886 #define TRANSACT2_SETFSINFO 0x04
887 #define TRANSACT2_QPATHINFO 0x05
888 #define TRANSACT2_SETPATHINFO 0x06
889 #define TRANSACT2_QFILEINFO 0x07
890 #define TRANSACT2_SETFILEINFO 0x08
891 #define TRANSACT2_FSCTL 0x09
892 #define TRANSACT2_IOCTL 0x0A
893 #define TRANSACT2_FINDNOTIFYFIRST 0x0B
894 #define TRANSACT2_FINDNOTIFYNEXT 0x0C
895 #define TRANSACT2_MKDIR 0x0D
896 #define TRANSACT2_SESSION_SETUP 0x0E
897 #define TRANSACT2_GET_DFS_REFERRAL 0x10
898 #define TRANSACT2_REPORT_DFS_INCONSISTANCY 0x11
900 /* These are the NT transact sub commands. */
901 #define NT_TRANSACT_CREATE 1
902 #define NT_TRANSACT_IOCTL 2
903 #define NT_TRANSACT_SET_SECURITY_DESC 3
904 #define NT_TRANSACT_NOTIFY_CHANGE 4
905 #define NT_TRANSACT_RENAME 5
906 #define NT_TRANSACT_QUERY_SECURITY_DESC 6
907 #define NT_TRANSACT_GET_USER_QUOTA 7
908 #define NT_TRANSACT_SET_USER_QUOTA 8
910 /* These are the NT transact_get_user_quota sub commands */
911 #define TRANSACT_GET_USER_QUOTA_LIST_CONTINUE 0x0000
912 #define TRANSACT_GET_USER_QUOTA_LIST_START 0x0100
913 #define TRANSACT_GET_USER_QUOTA_FOR_SID 0x0101
915 /* Relevant IOCTL codes */
916 #define IOCTL_QUERY_JOB_INFO 0x530060
918 /* these are the trans2 sub fields for primary requests */
919 #define smb_tpscnt smb_vwv0
920 #define smb_tdscnt smb_vwv1
921 #define smb_mprcnt smb_vwv2
922 #define smb_mdrcnt smb_vwv3
923 #define smb_msrcnt smb_vwv4
924 #define smb_flags smb_vwv5
925 #define smb_timeout smb_vwv6
926 #define smb_pscnt smb_vwv9
927 #define smb_psoff smb_vwv10
928 #define smb_dscnt smb_vwv11
929 #define smb_dsoff smb_vwv12
930 #define smb_suwcnt smb_vwv13
931 #define smb_setup smb_vwv14
932 #define smb_setup0 smb_setup
933 #define smb_setup1 (smb_setup+2)
934 #define smb_setup2 (smb_setup+4)
936 /* these are for the secondary requests */
937 #define smb_spscnt smb_vwv2
938 #define smb_spsoff smb_vwv3
939 #define smb_spsdisp smb_vwv4
940 #define smb_sdscnt smb_vwv5
941 #define smb_sdsoff smb_vwv6
942 #define smb_sdsdisp smb_vwv7
943 #define smb_sfid smb_vwv8
945 /* and these for responses */
946 #define smb_tprcnt smb_vwv0
947 #define smb_tdrcnt smb_vwv1
948 #define smb_prcnt smb_vwv3
949 #define smb_proff smb_vwv4
950 #define smb_prdisp smb_vwv5
951 #define smb_drcnt smb_vwv6
952 #define smb_droff smb_vwv7
953 #define smb_drdisp smb_vwv8
955 /* these are for the NT trans primary request. */
956 #define smb_nt_MaxSetupCount smb_vwv0
957 #define smb_nt_Flags (smb_vwv0 + 1)
958 #define smb_nt_TotalParameterCount (smb_vwv0 + 3)
959 #define smb_nt_TotalDataCount (smb_vwv0 + 7)
960 #define smb_nt_MaxParameterCount (smb_vwv0 + 11)
961 #define smb_nt_MaxDataCount (smb_vwv0 + 15)
962 #define smb_nt_ParameterCount (smb_vwv0 + 19)
963 #define smb_nt_ParameterOffset (smb_vwv0 + 23)
964 #define smb_nt_DataCount (smb_vwv0 + 27)
965 #define smb_nt_DataOffset (smb_vwv0 + 31)
966 #define smb_nt_SetupCount (smb_vwv0 + 35)
967 #define smb_nt_Function (smb_vwv0 + 36)
968 #define smb_nt_SetupStart (smb_vwv0 + 38)
970 /* these are for the NT trans secondary request. */
971 #define smb_nts_TotalParameterCount (smb_vwv0 + 3)
972 #define smb_nts_TotalDataCount (smb_vwv0 + 7)
973 #define smb_nts_ParameterCount (smb_vwv0 + 11)
974 #define smb_nts_ParameterOffset (smb_vwv0 + 15)
975 #define smb_nts_ParameterDisplacement (smb_vwv0 + 19)
976 #define smb_nts_DataCount (smb_vwv0 + 23)
977 #define smb_nts_DataOffset (smb_vwv0 + 27)
978 #define smb_nts_DataDisplacement (smb_vwv0 + 31)
980 /* these are for the NT trans reply. */
981 #define smb_ntr_TotalParameterCount (smb_vwv0 + 3)
982 #define smb_ntr_TotalDataCount (smb_vwv0 + 7)
983 #define smb_ntr_ParameterCount (smb_vwv0 + 11)
984 #define smb_ntr_ParameterOffset (smb_vwv0 + 15)
985 #define smb_ntr_ParameterDisplacement (smb_vwv0 + 19)
986 #define smb_ntr_DataCount (smb_vwv0 + 23)
987 #define smb_ntr_DataOffset (smb_vwv0 + 27)
988 #define smb_ntr_DataDisplacement (smb_vwv0 + 31)
990 /* these are for the NT create_and_X */
991 #define smb_ntcreate_NameLength (smb_vwv0 + 5)
992 #define smb_ntcreate_Flags (smb_vwv0 + 7)
993 #define smb_ntcreate_RootDirectoryFid (smb_vwv0 + 11)
994 #define smb_ntcreate_DesiredAccess (smb_vwv0 + 15)
995 #define smb_ntcreate_AllocationSize (smb_vwv0 + 19)
996 #define smb_ntcreate_FileAttributes (smb_vwv0 + 27)
997 #define smb_ntcreate_ShareAccess (smb_vwv0 + 31)
998 #define smb_ntcreate_CreateDisposition (smb_vwv0 + 35)
999 #define smb_ntcreate_CreateOptions (smb_vwv0 + 39)
1000 #define smb_ntcreate_ImpersonationLevel (smb_vwv0 + 43)
1001 #define smb_ntcreate_SecurityFlags (smb_vwv0 + 47)
1003 /* this is used on a TConX. I'm not sure the name is very helpful though */
1004 #define SMB_SUPPORT_SEARCH_BITS 0x0001
1005 #define SMB_SHARE_IN_DFS 0x0002
1007 /* Named pipe write mode flags. Used in writeX calls. */
1008 #define PIPE_RAW_MODE 0x4
1009 #define PIPE_START_MESSAGE 0x8
1011 /* File Specific access rights */
1012 #define FILE_READ_DATA 0x00000001
1013 #define FILE_WRITE_DATA 0x00000002
1014 #define FILE_APPEND_DATA 0x00000004
1015 #define FILE_READ_EA 0x00000008 /* File and directory */
1016 #define FILE_WRITE_EA 0x00000010 /* File and directory */
1017 #define FILE_EXECUTE 0x00000020
1018 #define FILE_DELETE_CHILD 0x00000040
1019 #define FILE_READ_ATTRIBUTES 0x00000080
1020 #define FILE_WRITE_ATTRIBUTES 0x00000100
1022 #define FILE_ALL_ACCESS 0x000001FF
1024 /* Directory specific access rights */
1025 #define FILE_LIST_DIRECTORY 0x00000001
1026 #define FILE_ADD_FILE 0x00000002
1027 #define FILE_ADD_SUBDIRECTORY 0x00000004
1028 #define FILE_TRAVERSE 0x00000020
1029 #define FILE_DELETE_CHILD 0x00000040
1031 /* the desired access to use when opening a pipe */
1032 #define DESIRED_ACCESS_PIPE 0x2019f
1034 /* Generic access masks & rights. */
1035 #define DELETE_ACCESS (1L<<16) /* 0x00010000 */
1036 #define READ_CONTROL_ACCESS (1L<<17) /* 0x00020000 */
1037 #define WRITE_DAC_ACCESS (1L<<18) /* 0x00040000 */
1038 #define WRITE_OWNER_ACCESS (1L<<19) /* 0x00080000 */
1039 #define SYNCHRONIZE_ACCESS (1L<<20) /* 0x00100000 */
1041 #define SYSTEM_SECURITY_ACCESS (1L<<24) /* 0x01000000 */
1042 #define MAXIMUM_ALLOWED_ACCESS (1L<<25) /* 0x02000000 */
1043 #define GENERIC_ALL_ACCESS (1<<28) /* 0x10000000 */
1044 #define GENERIC_EXECUTE_ACCESS (1<<29) /* 0x20000000 */
1045 #define GENERIC_WRITE_ACCESS (1<<30) /* 0x40000000 */
1046 #define GENERIC_READ_ACCESS (((unsigned)1)<<31) /* 0x80000000 */
1048 /* Mapping of generic access rights for files to specific rights. */
1050 #define FILE_GENERIC_ALL (STANDARD_RIGHTS_REQUIRED_ACCESS| SYNCHRONIZE_ACCESS|FILE_ALL_ACCESS)
1052 #define FILE_GENERIC_READ (STANDARD_RIGHTS_READ_ACCESS|FILE_READ_DATA|FILE_READ_ATTRIBUTES|\
1053 FILE_READ_EA|SYNCHRONIZE_ACCESS)
1055 #define FILE_GENERIC_WRITE (STANDARD_RIGHTS_WRITE_ACCESS|FILE_WRITE_DATA|FILE_WRITE_ATTRIBUTES|\
1056 FILE_WRITE_EA|FILE_APPEND_DATA|SYNCHRONIZE_ACCESS)
1058 #define FILE_GENERIC_EXECUTE (STANDARD_RIGHTS_EXECUTE_ACCESS|FILE_READ_ATTRIBUTES|\
1059 FILE_EXECUTE|SYNCHRONIZE_ACCESS)
1061 /* Mapping of access rights to UNIX perms. */
1062 #define UNIX_ACCESS_RWX FILE_GENERIC_ALL
1063 #define UNIX_ACCESS_R FILE_GENERIC_READ
1064 #define UNIX_ACCESS_W FILE_GENERIC_WRITE
1065 #define UNIX_ACCESS_X FILE_GENERIC_EXECUTE
1069 * This is the old mapping we used to use. To get W2KSP2 profiles
1070 * working we need to map to the canonical file perms.
1072 #define UNIX_ACCESS_RWX (UNIX_ACCESS_R|UNIX_ACCESS_W|UNIX_ACCESS_X)
1073 #define UNIX_ACCESS_R (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1074 FILE_READ_ATTRIBUTES|FILE_READ_EA|FILE_READ_DATA)
1075 #define UNIX_ACCESS_W (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1076 FILE_WRITE_ATTRIBUTES|FILE_WRITE_EA|\
1077 FILE_APPEND_DATA|FILE_WRITE_DATA)
1078 #define UNIX_ACCESS_X (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1079 FILE_EXECUTE|FILE_READ_ATTRIBUTES)
1082 #define UNIX_ACCESS_NONE (WRITE_OWNER_ACCESS)
1085 #define REQUEST_OPLOCK 2
1086 #define REQUEST_BATCH_OPLOCK 4
1087 #define OPEN_DIRECTORY 8
1088 #define EXTENDED_RESPONSE_REQUIRED 0x10
1090 /* ShareAccess field. */
1091 #define FILE_SHARE_NONE 0 /* Cannot be used in bitmask. */
1092 #define FILE_SHARE_READ 1
1093 #define FILE_SHARE_WRITE 2
1094 #define FILE_SHARE_DELETE 4
1096 /* FileAttributesField */
1097 #define FILE_ATTRIBUTE_READONLY 0x001L
1098 #define FILE_ATTRIBUTE_HIDDEN 0x002L
1099 #define FILE_ATTRIBUTE_SYSTEM 0x004L
1100 #define FILE_ATTRIBUTE_DIRECTORY 0x010L
1101 #define FILE_ATTRIBUTE_ARCHIVE 0x020L
1102 #define FILE_ATTRIBUTE_NORMAL 0x080L
1103 #define FILE_ATTRIBUTE_TEMPORARY 0x100L
1104 #define FILE_ATTRIBUTE_SPARSE 0x200L
1105 #define FILE_ATTRIBUTE_COMPRESSED 0x800L
1106 #define FILE_ATTRIBUTE_NONINDEXED 0x2000L
1107 #define SAMBA_ATTRIBUTES_MASK 0x7F
1109 /* Flags - combined with attributes. */
1110 #define FILE_FLAG_WRITE_THROUGH 0x80000000L
1111 #define FILE_FLAG_NO_BUFFERING 0x20000000L
1112 #define FILE_FLAG_RANDOM_ACCESS 0x10000000L
1113 #define FILE_FLAG_SEQUENTIAL_SCAN 0x08000000L
1114 #define FILE_FLAG_DELETE_ON_CLOSE 0x04000000L
1115 #define FILE_FLAG_BACKUP_SEMANTICS 0x02000000L
1116 #define FILE_FLAG_POSIX_SEMANTICS 0x01000000L
1118 /* CreateDisposition field. */
1119 #define FILE_SUPERSEDE 0
1121 #define FILE_CREATE 2
1122 #define FILE_OPEN_IF 3
1123 #define FILE_OVERWRITE 4
1124 #define FILE_OVERWRITE_IF 5
1126 /* CreateOptions field. */
1127 #define FILE_DIRECTORY_FILE 0x0001
1128 #define FILE_WRITE_THROUGH 0x0002
1129 #define FILE_SEQUENTIAL_ONLY 0x0004
1130 #define FILE_NON_DIRECTORY_FILE 0x0040
1131 #define FILE_NO_EA_KNOWLEDGE 0x0200
1132 #define FILE_EIGHT_DOT_THREE_ONLY 0x0400
1133 #define FILE_RANDOM_ACCESS 0x0800
1134 #define FILE_DELETE_ON_CLOSE 0x1000
1135 #define FILE_OPEN_BY_FILE_ID 0x2000
1137 /* Responses when opening a file. */
1138 #define FILE_WAS_SUPERSEDED 0
1139 #define FILE_WAS_OPENED 1
1140 #define FILE_WAS_CREATED 2
1141 #define FILE_WAS_OVERWRITTEN 3
1143 /* File type flags */
1144 #define FILE_TYPE_DISK 0
1145 #define FILE_TYPE_BYTE_MODE_PIPE 1
1146 #define FILE_TYPE_MESSAGE_MODE_PIPE 2
1147 #define FILE_TYPE_PRINTER 3
1148 #define FILE_TYPE_COMM_DEVICE 4
1149 #define FILE_TYPE_UNKNOWN 0xFFFF
1151 /* Flag for NT transact rename call. */
1152 #define RENAME_REPLACE_IF_EXISTS 1
1154 /* flags for SMBntrename call (from Samba4) */
1155 #define RENAME_FLAG_MOVE_CLUSTER_INFORMATION 0x102 /* ???? */
1156 #define RENAME_FLAG_HARD_LINK 0x103
1157 #define RENAME_FLAG_RENAME 0x104
1158 #define RENAME_FLAG_COPY 0x105
1160 /* Filesystem Attributes. */
1161 #define FILE_CASE_SENSITIVE_SEARCH 0x00000001
1162 #define FILE_CASE_PRESERVED_NAMES 0x00000002
1163 #define FILE_UNICODE_ON_DISK 0x00000004
1164 /* According to cifs9f, this is 4, not 8 */
1165 /* Acconding to testing, this actually sets the security attribute! */
1166 #define FILE_PERSISTENT_ACLS 0x00000008
1167 #define FILE_FILE_COMPRESSION 0x00000010
1168 #define FILE_VOLUME_QUOTAS 0x00000020
1169 #define FILE_SUPPORTS_SPARSE_FILES 0x00000040
1170 #define FILE_SUPPORTS_REPARSE_POINTS 0x00000080
1171 #define FILE_SUPPORTS_REMOTE_STORAGE 0x00000100
1172 #define FS_LFN_APIS 0x00004000
1173 #define FILE_VOLUME_IS_COMPRESSED 0x00008000
1174 #define FILE_SUPPORTS_OBJECT_IDS 0x00010000
1175 #define FILE_SUPPORTS_ENCRYPTION 0x00020000
1176 #define FILE_NAMED_STREAMS 0x00040000
1177 #define FILE_READ_ONLY_VOLUME 0x00080000
1179 /* ChangeNotify flags. */
1180 #define FILE_NOTIFY_CHANGE_FILE 0x001
1181 #define FILE_NOTIFY_CHANGE_DIR_NAME 0x002
1182 #define FILE_NOTIFY_CHANGE_ATTRIBUTES 0x004
1183 #define FILE_NOTIFY_CHANGE_SIZE 0x008
1184 #define FILE_NOTIFY_CHANGE_LAST_WRITE 0x010
1185 #define FILE_NOTIFY_CHANGE_LAST_ACCESS 0x020
1186 #define FILE_NOTIFY_CHANGE_CREATION 0x040
1187 #define FILE_NOTIFY_CHANGE_EA 0x080
1188 #define FILE_NOTIFY_CHANGE_SECURITY 0x100
1189 #define FILE_NOTIFY_CHANGE_FILE_NAME 0x200
1191 /* where to find the base of the SMB packet proper */
1192 #define smb_base(buf) (((char *)(buf))+4)
1194 /* we don't allow server strings to be longer than 48 characters as
1195 otherwise NT will not honour the announce packets */
1196 #define MAX_SERVER_STRING_LENGTH 48
1199 #define SMB_SUCCESS 0 /* The request was successful. */
1202 void dfs_unlogin(void);
1203 extern int dcelogin_atmost_once
;
1207 char *strdup(char *s
);
1211 #define SIGNAL_CAST (RETSIGTYPE (*)(int))
1218 /* these are used in NetServerEnum to choose what to receive */
1219 #define SV_TYPE_WORKSTATION 0x00000001
1220 #define SV_TYPE_SERVER 0x00000002
1221 #define SV_TYPE_SQLSERVER 0x00000004
1222 #define SV_TYPE_DOMAIN_CTRL 0x00000008
1223 #define SV_TYPE_DOMAIN_BAKCTRL 0x00000010
1224 #define SV_TYPE_TIME_SOURCE 0x00000020
1225 #define SV_TYPE_AFP 0x00000040
1226 #define SV_TYPE_NOVELL 0x00000080
1227 #define SV_TYPE_DOMAIN_MEMBER 0x00000100
1228 #define SV_TYPE_PRINTQ_SERVER 0x00000200
1229 #define SV_TYPE_DIALIN_SERVER 0x00000400
1230 #define SV_TYPE_SERVER_UNIX 0x00000800
1231 #define SV_TYPE_NT 0x00001000
1232 #define SV_TYPE_WFW 0x00002000
1233 #define SV_TYPE_SERVER_MFPN 0x00004000
1234 #define SV_TYPE_SERVER_NT 0x00008000
1235 #define SV_TYPE_POTENTIAL_BROWSER 0x00010000
1236 #define SV_TYPE_BACKUP_BROWSER 0x00020000
1237 #define SV_TYPE_MASTER_BROWSER 0x00040000
1238 #define SV_TYPE_DOMAIN_MASTER 0x00080000
1239 #define SV_TYPE_SERVER_OSF 0x00100000
1240 #define SV_TYPE_SERVER_VMS 0x00200000
1241 #define SV_TYPE_WIN95_PLUS 0x00400000
1242 #define SV_TYPE_DFS_SERVER 0x00800000
1243 #define SV_TYPE_ALTERNATE_XPORT 0x20000000
1244 #define SV_TYPE_LOCAL_LIST_ONLY 0x40000000
1245 #define SV_TYPE_DOMAIN_ENUM 0x80000000
1246 #define SV_TYPE_ALL 0xFFFFFFFF
1248 /* This was set by JHT in liaison with Jeremy Allison early 1997
1250 * Version 4.0 - never made public
1251 * Version 4.10 - New to 1.9.16p2, lost in space 1.9.16p3 to 1.9.16p9
1252 * - Reappeared in 1.9.16p11 with fixed smbd services
1253 * Version 4.20 - To indicate that nmbd and browsing now works better
1254 * Version 4.50 - Set at release of samba-2.2.0 by JHT
1256 * Note: In the presence of NT4.X do not set above 4.9
1257 * Setting this above 4.9 can have undesired side-effects.
1258 * This may change again in Samba-3.0 after further testing. JHT
1261 #define DEFAULT_MAJOR_VERSION 0x04
1262 #define DEFAULT_MINOR_VERSION 0x09
1264 /* Browser Election Values */
1265 #define BROWSER_ELECTION_VERSION 0x010f
1266 #define BROWSER_CONSTANT 0xaa55
1268 /* Sercurity mode bits. */
1269 #define NEGOTIATE_SECURITY_USER_LEVEL 0x01
1270 #define NEGOTIATE_SECURITY_CHALLENGE_RESPONSE 0x02
1271 #define NEGOTIATE_SECURITY_SIGNATURES_ENABLED 0x04
1272 #define NEGOTIATE_SECURITY_SIGNATURES_REQUIRED 0x08
1274 /* NT Flags2 bits - cifs6.txt section 3.1.2 */
1276 #define FLAGS2_LONG_PATH_COMPONENTS 0x0001
1277 #define FLAGS2_EXTENDED_ATTRIBUTES 0x0002
1278 #define FLAGS2_SMB_SECURITY_SIGNATURES 0x0004
1279 #define FLAGS2_IS_LONG_NAME 0x0040
1280 #define FLAGS2_EXTENDED_SECURITY 0x0800
1281 #define FLAGS2_DFS_PATHNAMES 0x1000
1282 #define FLAGS2_READ_PERMIT_NO_EXECUTE 0x2000
1283 #define FLAGS2_32_BIT_ERROR_CODES 0x4000
1284 #define FLAGS2_UNICODE_STRINGS 0x8000
1286 #define FLAGS2_WIN2K_SIGNATURE 0xC852 /* Hack alert ! For now... JRA. */
1288 /* Capabilities. see ftp.microsoft.com/developr/drg/cifs/cifs/cifs4.txt */
1290 #define CAP_RAW_MODE 0x0001
1291 #define CAP_MPX_MODE 0x0002
1292 #define CAP_UNICODE 0x0004
1293 #define CAP_LARGE_FILES 0x0008
1294 #define CAP_NT_SMBS 0x0010
1295 #define CAP_RPC_REMOTE_APIS 0x0020
1296 #define CAP_STATUS32 0x0040
1297 #define CAP_LEVEL_II_OPLOCKS 0x0080
1298 #define CAP_LOCK_AND_READ 0x0100
1299 #define CAP_NT_FIND 0x0200
1300 #define CAP_DFS 0x1000
1301 #define CAP_W2K_SMBS 0x2000
1302 #define CAP_LARGE_READX 0x4000
1303 #define CAP_LARGE_WRITEX 0x8000
1304 #define CAP_UNIX 0x800000 /* Capabilities for UNIX extensions. Created by HP. */
1305 #define CAP_EXTENDED_SECURITY 0x80000000
1307 /* protocol types. It assumes that higher protocols include lower protocols
1309 enum protocol_types
{PROTOCOL_NONE
,PROTOCOL_CORE
,PROTOCOL_COREPLUS
,PROTOCOL_LANMAN1
,PROTOCOL_LANMAN2
,PROTOCOL_NT1
};
1311 /* security levels */
1312 enum security_types
{SEC_SHARE
,SEC_USER
,SEC_SERVER
,SEC_DOMAIN
,SEC_ADS
};
1323 /* printing types */
1324 enum printing_types
{PRINT_BSD
,PRINT_SYSV
,PRINT_AIX
,PRINT_HPUX
,
1325 PRINT_QNX
,PRINT_PLP
,PRINT_LPRNG
,PRINT_SOFTQ
,
1326 PRINT_CUPS
,PRINT_LPRNT
,PRINT_LPROS2
1328 ,PRINT_TEST
,PRINT_VLP
1329 #endif /* DEVELOPER */
1332 /* LDAP schema types */
1333 enum schema_types
{SCHEMA_COMPAT
, SCHEMA_AD
, SCHEMA_SAMBA
};
1335 /* LDAP SSL options */
1336 enum ldap_ssl_types
{LDAP_SSL_ON
, LDAP_SSL_OFF
, LDAP_SSL_START_TLS
};
1338 /* LDAP PASSWD SYNC methods */
1339 enum ldap_passwd_sync_types
{LDAP_PASSWD_SYNC_ON
, LDAP_PASSWD_SYNC_OFF
, LDAP_PASSWD_SYNC_ONLY
};
1341 /* Remote architectures we know about. */
1342 enum remote_arch_types
{RA_UNKNOWN
, RA_WFWG
, RA_OS2
, RA_WIN95
, RA_WINNT
, RA_WIN2K
, RA_WINXP
, RA_WIN2K3
, RA_SAMBA
};
1345 enum case_handling
{CASE_LOWER
,CASE_UPPER
};
1348 * Global value meaing that the smb_uid field should be
1349 * ingored (in share level security and protocol level == CORE)
1352 #define UID_FIELD_INVALID 0
1353 #define VUID_OFFSET 100 /* Amount to bias returned vuid numbers */
1356 * Size of buffer to use when moving files across filesystems.
1358 #define COPYBUF_SIZE (8*1024)
1361 * Values used to override error codes.
1363 extern int unix_ERR_class
;
1364 extern int unix_ERR_code
;
1365 extern NTSTATUS unix_ERR_ntstatus
;
1368 * Used in chaining code.
1370 extern int chain_size
;
1373 * Map the Core and Extended Oplock requesst bits down
1374 * to common bits (EXCLUSIVE_OPLOCK & BATCH_OPLOCK).
1380 #define CORE_OPLOCK_REQUEST(inbuf) \
1381 ((CVAL(inbuf,smb_flg)&(FLAG_REQUEST_OPLOCK|FLAG_REQUEST_BATCH_OPLOCK))>>5)
1384 * Extended protocol.
1386 #define EXTENDED_OPLOCK_REQUEST(inbuf) ((SVAL(inbuf,smb_vwv2)&((1<<1)|(1<<2)))>>1)
1389 #define LOCKING_ANDX_SHARED_LOCK 0x1
1390 #define LOCKING_ANDX_OPLOCK_RELEASE 0x2
1391 #define LOCKING_ANDX_CHANGE_LOCKTYPE 0x4
1392 #define LOCKING_ANDX_CANCEL_LOCK 0x8
1393 #define LOCKING_ANDX_LARGE_FILES 0x10
1396 #define OPLOCKLEVEL_NONE 0
1397 #define OPLOCKLEVEL_II 1
1400 * Bits we test with.
1404 #define EXCLUSIVE_OPLOCK 1
1405 #define BATCH_OPLOCK 2
1406 #define LEVEL_II_OPLOCK 4
1408 #define EXCLUSIVE_OPLOCK_TYPE(lck) ((lck) & (EXCLUSIVE_OPLOCK|BATCH_OPLOCK))
1409 #define BATCH_OPLOCK_TYPE(lck) ((lck) & BATCH_OPLOCK)
1410 #define LEVEL_II_OPLOCK_TYPE(lck) ((lck) & LEVEL_II_OPLOCK)
1412 #define CORE_OPLOCK_GRANTED (1<<5)
1413 #define EXTENDED_OPLOCK_GRANTED (1<<15)
1416 * Return values for oplock types.
1419 #define NO_OPLOCK_RETURN 0
1420 #define EXCLUSIVE_OPLOCK_RETURN 1
1421 #define BATCH_OPLOCK_RETURN 2
1422 #define LEVEL_II_OPLOCK_RETURN 3
1425 * Loopback command offsets.
1428 #define OPBRK_CMD_LEN_OFFSET 0
1429 #define OPBRK_CMD_PORT_OFFSET 4
1430 #define OPBRK_CMD_HEADER_LEN 6
1432 #define OPBRK_MESSAGE_CMD_OFFSET 0
1435 * Oplock break command code to send over the udp socket.
1436 * The same message is sent for both exlusive and level II breaks.
1438 * The form of this is :
1440 * 0 2 2+pid 2+pid+dev 2+pid+dev+ino
1441 * +----+--------+-------+--------+---------+
1442 * | cmd| pid | dev | inode | fileid |
1443 * +----+--------+-------+--------+---------+
1446 #define OPLOCK_BREAK_PID_OFFSET 2
1447 #define OPLOCK_BREAK_DEV_OFFSET (OPLOCK_BREAK_PID_OFFSET + sizeof(pid_t))
1448 #define OPLOCK_BREAK_INODE_OFFSET (OPLOCK_BREAK_DEV_OFFSET + sizeof(SMB_DEV_T))
1449 #define OPLOCK_BREAK_FILEID_OFFSET (OPLOCK_BREAK_INODE_OFFSET + sizeof(SMB_INO_T))
1450 #define OPLOCK_BREAK_MSG_LEN (OPLOCK_BREAK_FILEID_OFFSET + sizeof(unsigned long))
1453 #define OPLOCK_BREAK_CMD 0x1
1454 #define KERNEL_OPLOCK_BREAK_CMD 0x2
1455 #define LEVEL_II_OPLOCK_BREAK_CMD 0x3
1456 #define ASYNC_LEVEL_II_OPLOCK_BREAK_CMD 0x4
1459 * Capabilities abstracted for different systems.
1462 #define KERNEL_OPLOCK_CAPABILITY 0x1
1465 * Oplock break command code sent via the kernel interface (if it exists).
1469 * 0 2 2+devsize 2+devsize+inodesize
1470 * +----+--------+--------+----------+
1471 * | cmd| dev | inode | fileid |
1472 * +----+--------+--------+----------+
1474 #define KERNEL_OPLOCK_BREAK_DEV_OFFSET 2
1475 #define KERNEL_OPLOCK_BREAK_INODE_OFFSET (KERNEL_OPLOCK_BREAK_DEV_OFFSET + sizeof(SMB_DEV_T))
1476 #define KERNEL_OPLOCK_BREAK_FILEID_OFFSET (KERNEL_OPLOCK_BREAK_INODE_OFFSET + sizeof(SMB_INO_T))
1477 #define KERNEL_OPLOCK_BREAK_MSG_LEN (KERNEL_OPLOCK_BREAK_FILEID_OFFSET + sizeof(unsigned long))
1480 /* if a kernel does support oplocks then a structure of the following
1481 typee is used to describe how to interact with the kernel */
1482 struct kernel_oplocks
{
1483 BOOL (*receive_message
)(fd_set
*fds
, char *buffer
, int buffer_len
);
1484 BOOL (*set_oplock
)(files_struct
*fsp
, int oplock_type
);
1485 void (*release_oplock
)(files_struct
*fsp
);
1486 BOOL (*parse_message
)(char *msg_start
, int msg_len
, SMB_INO_T
*inode
, SMB_DEV_T
*dev
, unsigned long *file_id
);
1487 BOOL (*msg_waiting
)(fd_set
*fds
);
1488 int notification_fd
;
1492 #define CMD_REPLY 0x8000
1494 /* this structure defines the functions for doing change notify in
1495 various implementations */
1496 struct cnotify_fns
{
1497 void * (*register_notify
)(connection_struct
*conn
, char *path
, uint32 flags
);
1498 BOOL (*check_notify
)(connection_struct
*conn
, uint16 vuid
, char *path
, uint32 flags
, void *data
, time_t t
);
1499 void (*remove_notify
)(void *data
);
1505 #include "smb_macros.h"
1507 #define MAX_NETBIOSNAME_LEN 16
1508 /* DOS character, NetBIOS namestring. Type used on the wire. */
1509 typedef char nstring
[MAX_NETBIOSNAME_LEN
];
1510 /* Unix character, NetBIOS namestring. Type used to manipulate name in nmbd. */
1511 typedef char unstring
[MAX_NETBIOSNAME_LEN
*4];
1513 /* A netbios name structure. */
1517 unsigned int name_type
;
1521 /* A netbios node status array element. */
1522 struct node_status
{
1525 unsigned char flags
;
1537 typedef struct user_struct
1539 struct user_struct
*next
, *prev
;
1540 uint16 vuid
; /* Tag for this entry. */
1541 uid_t uid
; /* uid of a validated user */
1542 gid_t gid
; /* gid of a validated user */
1544 userdom_struct user
;
1551 /* following groups stuff added by ih */
1552 /* This groups info is needed for when we become_user() for this uid */
1556 NT_USER_TOKEN
*nt_user_token
;
1558 DATA_BLOB session_key
;
1560 char *session_keystr
; /* used by utmp and pam session code.
1564 struct auth_serversupplied_info
*server_info
;
1569 struct unix_error_map
{
1577 #include "ntdomain.h"
1583 * Size of new password account encoding string. This is enough space to
1584 * hold 11 ACB characters, plus the surrounding [] and a terminating null.
1585 * Do not change unless you are adding new ACB bits!
1588 #define NEW_PW_FORMAT_SPACE_PADDED_LEN 14
1591 Do you want session setups at user level security with a invalid
1592 password to be rejected or allowed in as guest? WinNT rejects them
1593 but it can be a pain as it means "net view" needs to use a password
1595 You have 3 choices in the setting of map_to_guest:
1597 "NEVER_MAP_TO_GUEST" means session setups with an invalid password
1598 are rejected. This is the default.
1600 "MAP_TO_GUEST_ON_BAD_USER" means session setups with an invalid password
1601 are rejected, unless the username does not exist, in which case it
1602 is treated as a guest login
1604 "MAP_TO_GUEST_ON_BAD_PASSWORD" means session setups with an invalid password
1605 are treated as a guest login
1607 Note that map_to_guest only has an effect in user or server
1611 #define NEVER_MAP_TO_GUEST 0
1612 #define MAP_TO_GUEST_ON_BAD_USER 1
1613 #define MAP_TO_GUEST_ON_BAD_PASSWORD 2
1615 #define SAFE_NETBIOS_CHARS ". -_"
1617 /* generic iconv conversion structure */
1619 size_t (*direct
)(void *cd
, char **inbuf
, size_t *inbytesleft
,
1620 char **outbuf
, size_t *outbytesleft
);
1621 size_t (*pull
)(void *cd
, char **inbuf
, size_t *inbytesleft
,
1622 char **outbuf
, size_t *outbytesleft
);
1623 size_t (*push
)(void *cd
, char **inbuf
, size_t *inbytesleft
,
1624 char **outbuf
, size_t *outbytesleft
);
1625 void *cd_direct
, *cd_pull
, *cd_push
;
1626 char *from_name
, *to_name
;
1629 /* The maximum length of a trust account password.
1630 Used when we randomly create it, 15 char passwords
1631 exceed NT4's max password length */
1633 #define DEFAULT_TRUST_ACCOUNT_PASSWORD_LENGTH 14
1635 #include "popt_common.h"
1639 #define LDAP_PORT 389
1642 /* used by the IP comparison function */
1648 /* Used by the SMB signing functions. */
1650 typedef struct smb_sign_info
{
1651 void (*sign_outgoing_message
)(char *outbuf
, struct smb_sign_info
*si
);
1652 BOOL (*check_incoming_message
)(char *inbuf
, struct smb_sign_info
*si
, BOOL must_be_ok
);
1653 void (*free_signing_context
)(struct smb_sign_info
*si
);
1654 void *signing_context
;
1656 BOOL negotiated_smb_signing
;
1657 BOOL allow_smb_signing
;
1659 BOOL mandatory_signing
;
1660 BOOL seen_valid
; /* Have I ever seen a validly signed packet? */
1669 /* EA names used internally in Samba. KEEP UP TO DATE with prohibited_ea_names in trans2.c !. */
1670 #define SAMBA_POSIX_INHERITANCE_EA_NAME "user.SAMBA_PAI"