printing: fix purge of all print jobs

[Samba.git] / docs-xml / manpages / smb.conf.5.xml

<refentry id="smb.conf.5" xmlns:xi="http://www.w3.org/2003/XInclude"
                         xmlns:samba="http://www.samba.org/samba/DTD/samba-doc">
        
<refmeta>
        <refentrytitle>smb.conf</refentrytitle>
        <manvolnum>5</manvolnum>
        <refmiscinfo class="source">Samba</refmiscinfo>
        <refmiscinfo class="manual">File Formats and Conventions</refmiscinfo>
        <refmiscinfo class="version">4.1</refmiscinfo>
</refmeta>


<refnamediv>
        <refname>smb.conf</refname>
        <refpurpose>The configuration file for the Samba suite</refpurpose>
</refnamediv>

<refsect1>
        <title>SYNOPSIS</title>

        <para>
        The <filename moreinfo="none">smb.conf</filename> file is a configuration  file for the Samba suite. <filename
        moreinfo="none">smb.conf</filename> contains  runtime configuration information for the Samba programs. The
        complete description of the file format and possible parameters held within are here for reference purposes.
        </para>
</refsect1>

<refsect1 id="FILEFORMATSECT">
        <title>FILE FORMAT</title>

        <para>
        The file consists of sections and parameters. A section begins with the name of the section in square brackets
        and continues until the next section begins. Sections contain parameters of the form:
<programlisting>
<replaceable>name</replaceable> = <replaceable>value </replaceable>
</programlisting>
        </para>

        <para>
        The file is line-based - that is, each newline-terminated line represents either a comment, a section name or
        a parameter.
        </para>

        <para>Section and parameter names are not case sensitive.</para>

        <para>
        Only the first equals sign in a parameter is significant.  Whitespace before or after the first equals sign is
        discarded.  Leading, trailing and internal whitespace in section and parameter names is irrelevant. Leading
        and trailing whitespace in a parameter value is discarded. Internal whitespace within a parameter value is
        retained verbatim.
        </para>

        <para>
        Any line beginning with a semicolon (<quote>;</quote>) or a hash (<quote>#</quote>) 
        character is ignored, as are lines containing only whitespace.
        </para>

        <para>
        Any line ending in a <quote><literal>\</literal></quote> is continued on the next line in the customary UNIX fashion.
        </para>

        <para>
        The values following the equals sign in parameters are all either a string (no quotes needed) or a boolean,
        which may be given as yes/no, 1/0 or true/false. Case is not significant in boolean values, but is preserved
        in string values. Some items such as create masks are numeric.
        </para>

</refsect1>

<refsect1>
        <title>SECTION DESCRIPTIONS</title>

        <para>
        Each section in the configuration file (except for the [global] section) describes a shared resource (known as
        a <quote>share</quote>). The section name is the name of the shared resource and the parameters within the
        section define the shares attributes.
        </para>

        <para>
        There are three special sections, [global], [homes] and [printers], which are described under
         <emphasis>special sections</emphasis>. The following notes apply to ordinary section descriptions.
        </para>

        <para>
        A share consists of a directory to which access is being given plus a description of the access rights
        which are granted to the user of the service. Some housekeeping options are also specifiable.
        </para>
        
        <para>
        Sections are either file share services (used by the client as an extension of their native file systems)
        or printable services (used by the client to access print services on the host running the server).
        </para>
        
        <para>
        Sections may be designated <emphasis>guest</emphasis> services, in which case no password is required to
        access them. A specified UNIX <emphasis>guest account</emphasis> is used to define access privileges in this
        case.
        </para>

        <para>
        Sections other than guest services will require a password to access them. The client provides the
        username. As older clients only provide passwords and not usernames, you may specify a list of usernames to
        check against the password using the <literal>user =</literal> option in the share definition. For modern clients
        such as Windows 95/98/ME/NT/2000, this should not be necessary.
        </para> 

        <para>
        The access rights granted by the server are masked by the access rights granted to the specified or guest
        UNIX user by the host system. The server does not grant more access than the host system grants.
        </para>
        
        <para>
        The following sample section defines a file space share.  The user has write access to the path <filename
        moreinfo="none">/home/bar</filename>.  The share is accessed via the share name <literal>foo</literal>:
<programlisting>
        <smbconfsection name="[foo]"/>
        <smbconfoption name="path">/home/bar</smbconfoption>
        <smbconfoption name="read only">no</smbconfoption>
</programlisting>
        </para>

        <para>
        The following sample section defines a printable share.  The share is read-only, but printable. That is,
        the only write access permitted is via calls to open, write to and close a spool file. The <emphasis>guest
        ok</emphasis> parameter means access will be permitted as the default guest user (specified elsewhere):
<programlisting>
        <smbconfsection name="[aprinter]"/>
        <smbconfoption name="path">/usr/spool/public</smbconfoption>
        <smbconfoption name="read only">yes</smbconfoption>
        <smbconfoption name="printable">yes</smbconfoption>
        <smbconfoption name="guest ok">yes</smbconfoption>
</programlisting>
        </para>

</refsect1>

<refsect1>
        <title>SPECIAL SECTIONS</title>
        
        <refsect2>
                <title>The [global] section</title>
                
                <para>
                Parameters in this section apply to the server as a whole, or are defaults for sections that do not
                specifically define certain items. See the notes under PARAMETERS for more information.
                </para>
        </refsect2>
        
        <refsect2 id="HOMESECT">
                <title>The [homes] section</title>
                
                <para>
                If a section called [homes] is included in the configuration file, services connecting clients
                to their home directories can be created on the fly by the server.
                </para>

                <para>
                When the connection request is made, the existing sections are scanned. If a match is found, it is
                used. If no match is found, the requested section name is treated as a username and looked up in the local
                password file. If the name exists and the correct password has been given, a share is created by cloning the
                [homes] section.
                </para>
                
                <para>
                Some modifications are then made to the newly created share:
                </para>
                
                <itemizedlist>
                        <listitem><para>
                        The share name is changed from homes to the located username.
                        </para></listitem>

                        <listitem><para>
                        If no path was given, the path is set to the user's home directory.
                        </para></listitem>
                </itemizedlist>

                <para>
                If you decide to use a <emphasis>path =</emphasis> line in your [homes] section, it may be useful 
                to use the %S macro. For example:
<programlisting>
<userinput moreinfo="none">path = /data/pchome/%S</userinput>
</programlisting>
                is useful if you have different home directories for your PCs than for UNIX access.
                </para>

                <para>
                This is a fast and simple way to give a large number of clients access to their home directories with a minimum 
                of fuss.
                </para>

                <para>
                A similar process occurs if the requested section name is <quote>homes</quote>, except that the share
                name is not changed to that of the requesting user. This method of using the [homes] section works well if
                different users share a client PC.
                </para>
                
                <para>
                The [homes] section can specify all the parameters a normal service section can specify, though some make more sense 
                than others. The following is a typical and suitable [homes] section:
<programlisting>
<smbconfsection name="[homes]"/>
<smbconfoption name="read only">no</smbconfoption>
</programlisting>
                </para>
        
                <para>
                An important point is that if guest access is specified in the [homes] section, all home directories will be 
                visible to all clients <emphasis>without a password</emphasis>.  In the very unlikely event that this is actually
                desirable, it is wise to also specify <emphasis>read only access</emphasis>.
                </para>

                <para>
                The <emphasis>browseable</emphasis> flag for auto home directories will be inherited from the global browseable 
                flag, not the [homes] browseable flag. This is useful as it means setting <emphasis>browseable = no</emphasis> in
                the [homes] section will hide the [homes] share but make any auto home directories visible.
                </para>
        </refsect2>

        <refsect2 id="PRINTERSSECT">
                <title>The [printers] section</title>
                
                <para>
                This section works like [homes], but for printers.
                </para>

                <para>
                If a [printers] section occurs in the configuration file, users are able to connect to any printer 
                specified in the local host's printcap file.
                </para>

                <para>
                When a connection request is made, the existing sections are scanned. If a match is found, it is used.
                If no match is found, but a [homes] section exists, it is used as described above. Otherwise, the requested
                section name is treated as a printer name and the appropriate printcap file is scanned to see if the requested
                section name is a valid printer share name. If a match is found, a new printer share is created by cloning the
                [printers] section.
                </para>

                <para>
                A few modifications are then made to the newly created share:
                </para>

                <itemizedlist>
                        <listitem><para>The share name is set to the located printer name</para></listitem>

                        <listitem><para>If no printer name was given, the printer name is set to the located printer name</para></listitem>

                        <listitem><para>If the share does not permit guest access and no username was given, the username is set
                                to the located printer name.</para></listitem>
                </itemizedlist>

                <para>
                The [printers] service MUST be printable - if you specify otherwise, the server will refuse 
                to load the configuration file.
                </para>
                
                <para>
                Typically the path specified is that of a world-writeable spool directory with the sticky bit set on 
                it. A typical [printers] entry looks like this:
<programlisting>
<smbconfsection name="[printers]"/>
<smbconfoption name="path">/usr/spool/public</smbconfoption>
<smbconfoption name="guest ok">yes</smbconfoption>
<smbconfoption name="printable">yes</smbconfoption>
</programlisting>
                </para>

                <para>
                All aliases given for a printer in the printcap file are legitimate printer names as far as the server is concerned. 
                If your printing subsystem doesn't work like that, you will have to set up a pseudo-printcap. This is a file
                consisting of one or more lines like this:
<programlisting>
alias|alias|alias|alias...    
</programlisting>
                </para>

                <para>
                Each alias should be an acceptable printer name for your printing subsystem. In the [global] section,
                specify the new file as your printcap.  The server will only recognize names found in your pseudo-printcap,
                which of course can contain whatever aliases you like. The same technique could be used simply to limit access
                to a subset of your local printers.
                </para>

                <para>
                An alias, by the way, is defined as any component of the first entry of a printcap record. Records are separated by newlines,
                components (if there are more than one) are separated by vertical bar symbols (<literal>|</literal>).
                </para>
                
                <note><para>
                On SYSV systems which use lpstat to determine what printers are defined on the system you may be able to use
                <literal>printcap name = lpstat</literal> to automatically obtain a list of printers. See the
                <literal>printcap name</literal> option for more details.
                </para></note>
        </refsect2>
</refsect1>

<refsect1>
        <title>USERSHARES</title>

        <para>Starting with Samba version 3.0.23 the capability for non-root users to add, modify, and delete
        their own share definitions has been added. This capability is called <emphasis>usershares</emphasis> and
        is controlled by a set of parameters in the [global] section of the smb.conf.
        The relevant parameters are :
        </para>

        <variablelist>
                <varlistentry>
                <term>usershare allow guests</term>
                <listitem><para>Controls if usershares can permit guest access.</para></listitem>
                </varlistentry>

                <varlistentry>
                <term>usershare max shares</term>
                <listitem><para>Maximum number of user defined shares allowed.</para></listitem>
                </varlistentry>

                <varlistentry>
                <term>usershare owner only</term>
                <listitem><para>If set only directories owned by the sharing user can be shared.</para></listitem>
                </varlistentry>

                <varlistentry>
                <term>usershare path</term>
                <listitem><para>Points to the directory containing the user defined share definitions.
                The filesystem permissions on this directory control who can create user defined shares.</para></listitem>
                </varlistentry>

                <varlistentry>
                <term>usershare prefix allow list</term>
                <listitem><para>Comma-separated list of absolute pathnames restricting what directories
                can be shared. Only directories below the pathnames in this list are permitted.</para></listitem>
                </varlistentry>

                <varlistentry>
                <term>usershare prefix deny list</term>
                <listitem><para>Comma-separated list of absolute pathnames restricting what directories
                can be shared. Directories below the pathnames in this list are prohibited.</para></listitem>
                </varlistentry>

                <varlistentry>
                <term>usershare template share</term>
                <listitem><para>Names a pre-existing share used as a template for creating new usershares.
                All other share parameters not specified in the user defined share definition
                are copied from this named share.</para></listitem>
                </varlistentry>
        </variablelist>

        <para>To allow members of the UNIX group <literal>foo</literal> to create user defined
        shares, create the directory to contain the share definitions as follows:
        </para>
        <para>Become root:</para>
<programlisting>
mkdir /usr/local/samba/lib/usershares
chgrp foo /usr/local/samba/lib/usershares
chmod 1770 /usr/local/samba/lib/usershares
</programlisting>
<para>Then add the parameters 

<programlisting>
        <smbconfoption name="usershare path">/usr/local/samba/lib/usershares</smbconfoption>
        <smbconfoption name="usershare max shares">10</smbconfoption> # (or the desired number of shares)
</programlisting> 

        to the global
        section of your <filename>smb.conf</filename>. Members of the group foo may then manipulate the user defined shares
        using the following commands.</para>

        <variablelist>
                <varlistentry>
                <term>net usershare add sharename path [comment] [acl] [guest_ok=[y|n]]</term>
                <listitem><para>To create or modify (overwrite) a user defined share.</para></listitem>
                </varlistentry>

                <varlistentry>
                <term>net usershare delete sharename</term>
                <listitem><para>To delete a user defined share.</para></listitem>
                </varlistentry>

                <varlistentry>
                <term>net usershare list wildcard-sharename</term>
                <listitem><para>To list user defined shares.</para></listitem>
                </varlistentry>

                <varlistentry>
                <term>net usershare info wildcard-sharename</term>
                <listitem><para>To print information about user defined shares.</para></listitem>
                </varlistentry>
        </variablelist>
</refsect1>
        
<refsect1>
        <title>PARAMETERS</title>

        <para>Parameters define the specific attributes of sections.</para>

        <para>
        Some parameters are specific to the [global] section (e.g., <emphasis>security</emphasis>).  Some parameters
        are usable in all sections (e.g., <emphasis>create mask</emphasis>). All others are permissible only in normal
        sections. For the purposes of the following descriptions the [homes] and [printers] sections will be
        considered normal.  The letter <emphasis>G</emphasis> in parentheses indicates that a parameter is specific to
        the [global] section. The letter <emphasis>S</emphasis> indicates that a parameter can be specified in a
        service specific section. All <emphasis>S</emphasis> parameters can also be specified in the [global] section
        - in which case they will define the default behavior for all services.
        </para>

        <para>
        Parameters are arranged here in alphabetical order - this may not create best bedfellows, but at least you can
        find them! Where there are synonyms, the preferred synonym is described, others refer to the preferred
        synonym.
        </para>
</refsect1>

<refsect1>
        <title>VARIABLE SUBSTITUTIONS</title>

        <para>
        Many of the strings that are settable in the config file can take substitutions. For example the option
        <quote>path = /tmp/%u</quote> is interpreted as <quote>path = /tmp/john</quote> if the user connected with the
        username john.
        </para>

        <para>
        These substitutions are mostly noted in the descriptions below, but there are some general substitutions
        which apply whenever they might be relevant. These are:
        </para>

        <variablelist>
                <varlistentry>
                <term>%U</term>
                <listitem><para>session username (the username that the client wanted, not
                        necessarily the same as the one they got).</para></listitem>
                </varlistentry>
                
                <varlistentry>
                <term>%G</term>
                <listitem><para>primary group name of %U.</para></listitem>
                </varlistentry>

                <varlistentry>
                <term>%h</term>
                <listitem><para>the Internet hostname that Samba is running on.</para></listitem>
                </varlistentry>

                <varlistentry>
                <term>%m</term>
                <listitem><para>the NetBIOS name of the client machine (very useful).</para>

                        <para>This parameter is not available when Samba listens on port 445, as clients no longer
                        send this information. If you use this macro in an include statement on a domain that has
                        a Samba domain controller be sure to set in the [global] section <parameter>smb ports =
                        139</parameter>. This will cause Samba to not listen on port 445 and will permit include
                        functionality to function as it did with Samba 2.x.
                        </para></listitem>

                </varlistentry>
                
                <varlistentry>
                <term>%L</term>
                <listitem><para>the NetBIOS name of the server. This allows you to change your config based on what
                        the client calls you. Your server can have a <quote>dual personality</quote>.
                </para></listitem>
                </varlistentry>
                
                <varlistentry>
                <term>%M</term>
                <listitem><para>the Internet name of the client machine.
                </para></listitem>
                </varlistentry>
                
                <varlistentry>
                <term>%R</term>
                <listitem><para>the selected protocol level after protocol negotiation. It can be one of CORE, COREPLUS, 
                        LANMAN1, LANMAN2, NT1, SMB2_02, SMB2_10, SMB2_22, SMB2_24, SMB3_00, SMB3_02 or SMB2_FF.</para></listitem>
                </varlistentry>

                <varlistentry>
                <term>%d</term>
                <listitem><para>the process id of the current server
                        process.</para></listitem>
                </varlistentry>
                
                <varlistentry>
                <term>%a</term>
                <listitem><para>
                    The architecture of the remote
                    machine.  It currently recognizes Samba (<constant>Samba</constant>), 
                    the Linux CIFS file system (<constant>CIFSFS</constant>), OS/2, (<constant>OS2</constant>),
                    Mac OS X (<constant>OSX</constant>), Windows for Workgroups (<constant>WfWg</constant>), Windows 9x/ME 
                    (<constant>Win95</constant>), Windows NT (<constant>WinNT</constant>),
                    Windows 2000 (<constant>Win2K</constant>),
                    Windows XP (<constant>WinXP</constant>),
                    Windows XP 64-bit(<constant>WinXP64</constant>),
                    Windows 2003 including
                    2003R2 (<constant>Win2K3</constant>), and Windows
                    Vista (<constant>Vista</constant>).  Anything else will be known as 
                    <constant>UNKNOWN</constant>.</para> 
                </listitem>
                </varlistentry>
                
                <varlistentry>
                <term>%I</term>
                <listitem><para>the IP address of the client machine.</para>
                <para>Before 4.0.0 it could contain IPv4 mapped IPv6 addresses,
                        now it only contains IPv4 or IPv6 addresses.</para>
                </listitem>
                </varlistentry>

                <varlistentry>
                <term>%i</term>
                <listitem><para>the local IP address to which a client connected.</para>
                <para>Before 4.0.0 it could contain IPv4 mapped IPv6 addresses,
                        now it only contains IPv4 or IPv6 addresses.</para>
                </listitem>
                </varlistentry>

                <varlistentry>
                <term>%T</term>
                <listitem><para>the current date and time.</para></listitem>
                </varlistentry>

                <varlistentry>
                <term>%D</term>
                <listitem><para>name of the domain or workgroup of the current user.</para></listitem>
                </varlistentry>
                
                <varlistentry>
                <term>%w</term>
                <listitem><para>the winbind separator.</para></listitem>
                </varlistentry>
                
                <varlistentry>
                <term>%$(<replaceable>envvar</replaceable>)</term>
                <listitem><para>the value of the environment variable
                <replaceable>envar</replaceable>.</para></listitem>
                </varlistentry>
        </variablelist>

        <para>
        The following substitutes apply only to some configuration options (only those that are
        used when a connection has been established):
        </para>

        <variablelist>
                <varlistentry>
                <term>%S</term>
                <listitem><para>the name of the current service, if any.</para>
                </listitem>
                </varlistentry>
        
                <varlistentry>
                <term>%P</term>
                <listitem><para>the root directory of the current service, if any.</para></listitem>
                </varlistentry>
        
                <varlistentry>
                <term>%u</term>
                <listitem><para>username of the current service, if any.</para>
                </listitem>
                </varlistentry>
        
                <varlistentry>
                <term>%g</term>
                <listitem><para>primary group name of %u.</para></listitem>
                </varlistentry>
        
                <varlistentry>
                <term>%H</term>
                <listitem><para>the home directory of the user given by %u.</para></listitem>
                </varlistentry>

                <varlistentry>
                <term>%N</term>
                <listitem><para>
                        the name of your NIS home directory server.  This is obtained from your NIS auto.map entry. 
                        If you have not compiled Samba with the <emphasis>--with-automount</emphasis> option, this
                        value will be the same as %L.</para></listitem>
                </varlistentry>
        
                <varlistentry>
                <term>%p</term>
                <listitem><para>
                        the path of the service's home directory, obtained from your NIS auto.map entry. The NIS
                        auto.map entry is split up as <literal>%N:%p</literal>.</para></listitem>
                </varlistentry>
        </variablelist>
        
        <para>
        There are some quite creative things that can be done with these substitutions and other
        <filename moreinfo="none">smb.conf</filename> options.
        </para>
</refsect1>

<refsect1 id="NAMEMANGLINGSECT">
        <title>NAME MANGLING</title>
        
        <para>
        Samba supports <literal>name mangling</literal> so that DOS and Windows clients can use files that don't
        conform to the 8.3 format. It can also be set to adjust the case of 8.3 format filenames.
        </para>

        <para>
        There are several options that control the way mangling is performed, and they are grouped here rather
        than listed separately. For the defaults look at the output of the testparm program.
        </para>

        <para>
        These options can be set separately for each service.
        </para>

        <para>
        The options are:
        </para>
        
        <variablelist>
        
        <varlistentry>
                <term>case sensitive = yes/no/auto</term>
                <listitem><para>
                controls whether filenames are case sensitive. If they aren't, Samba must do a filename search and match on
                passed names. The default setting of auto allows clients that support case sensitive filenames (Linux CIFSVFS
                and smbclient 3.0.5 and above currently) to tell the Samba server on a per-packet basis that they wish to
                access the file system in a case-sensitive manner (to support UNIX case sensitive semantics). No Windows or
                DOS system supports case-sensitive filename so setting this option to auto is that same as setting it to no
                for them. Default <emphasis>auto</emphasis>.
                </para></listitem>
                </varlistentry> 

                <varlistentry>
                <term>default case = upper/lower</term>
                <listitem><para>
                controls what the default case is for new filenames (ie. files that don't currently exist in the filesystem).
                Default <emphasis>lower</emphasis>.  IMPORTANT NOTE: As part of the optimizations for directories containing
                large numbers of files, the following special case applies. If the options
                <smbconfoption  name="case sensitive">yes</smbconfoption>, <smbconfoption name="preserve case">No</smbconfoption>, and
                <smbconfoption name="short preserve case">No</smbconfoption> are set, then the case of <emphasis>all</emphasis>
                incoming client filenames, not just new filenames, will be modified. See additional notes below.
                </para></listitem>
                </varlistentry> 
        
                <varlistentry>
                <term>preserve case = yes/no</term>
                <listitem><para>
                controls whether new files (ie. files that don't currently exist in the filesystem) are created with the case
                that the client passes, or if they are forced to be the <literal>default</literal> case. Default
                <emphasis>yes</emphasis>.
                </para></listitem>
                </varlistentry> 

                <varlistentry>
                <term>short preserve case = yes/no</term>
                <listitem><para>
                controls if new files (ie. files that don't currently exist in the filesystem) which conform to 8.3 syntax,
                that is all in upper case and of suitable length, are created upper case, or if they are forced to be the
                <literal>default</literal> case. This option can be used with <literal>preserve case = yes</literal> to permit
                long filenames to retain their case, while short names are lowercased. Default <emphasis>yes</emphasis>.
                </para></listitem>
                </varlistentry> 
        </variablelist>
        
        <para>
        By default, Samba 3.0 has the same semantics as a Windows NT server, in that it is case insensitive
        but case preserving. As a special case for directories with large numbers of files, if the case
        options are set as follows, "case sensitive = yes", "case preserve = no", "short preserve case = no"
        then the "default case" option will be applied and will modify all filenames sent from the client
        when accessing this share.
        </para>
        
</refsect1>

<refsect1>
        <title>REGISTRY-BASED CONFIGURATION</title>

        <para>
                Starting with Samba version 3.2.0, the capability to
                store Samba configuration in the registry is available.
                The configuration is stored in the registry key
                 <emphasis><literal>HKLM\Software\Samba\smbconf</literal></emphasis>.
                There are two levels of registry configuration:
        </para>

        <orderedlist continuation="restarts" inheritnum="ignore" numeration="arabic">
                <listitem><para>Share definitions stored in registry are used.
                This is triggered by setting the global 
                parameter <parameter>registry shares</parameter>
                to <quote>yes</quote> in <emphasis>smb.conf</emphasis>.
                </para>

                <para>The registry shares are loaded not at startup but
                on demand at runtime by <emphasis>smbd</emphasis>.
                Shares defined in <emphasis>smb.conf</emphasis> take
                priority over shares of the same name defined in
                registry.</para></listitem>

                <listitem>
                <para>Global <emphasis>smb.conf</emphasis>
                options stored in registry are used. This can be activated
                in two different ways:</para>

                <para>Firstly, a registry only configuration is triggered
                by setting
                <smbconfoption name="config backend">registry</smbconfoption>
                in the [global] section of <emphasis>smb.conf</emphasis>.
                This resets everything that has been read from config files
                to this point and reads the content of the global configuration
                section from the registry.
                This is the recommended method of using registry based
                configuration.</para>

                <para>Secondly, a mixed configuration can be activated
                by a special new meaning of the parameter
                <smbconfoption name="include">registry</smbconfoption>
                in the [global] section of <emphasis>smb.conf</emphasis>.
                This reads the global options from registry with the same
                priorities as for an include of a text file.
                This may be especially useful in cases where an initial
                configuration is needed to access the registry.</para>

                <para>Activation of global registry options automatically
                activates registry shares. So in the registry only case,
                shares are loaded on demand only.</para>
                </listitem>
        </orderedlist>

        <para>
                Note: To make registry-based configurations foolproof
                at least to a certain extent, the use
                of <parameter>lock directory</parameter> and
                 <parameter>config backend</parameter>
                inside the registry configuration has been disabled:
                Especially by changing the
                 <parameter>lock directory</parameter> inside the registry
                configuration, one would create a broken setup where the daemons
                do not see the configuration they loaded once it is active.
        </para>

        <para>
                The registry configuration can be accessed with
                tools like <emphasis>regedit</emphasis> or <emphasis>net (rpc)
                registry</emphasis> in the key
                 <emphasis><literal>HKLM\Software\Samba\smbconf</literal></emphasis>.

                More conveniently, the <emphasis>conf</emphasis> subcommand of the
                 <citerefentry><refentrytitle>net</refentrytitle>
                <manvolnum>8</manvolnum></citerefentry> utility
                offers a dedicated interface to read and write the
                registry based configuration locally, i.e. directly
                accessing the database file, circumventing the
                server.
        </para>

</refsect1>

<refsect1>
        <title>EXPLANATION OF EACH PARAMETER</title>
        
        <samba:parameterlist>
                <!-- The URI below is resolved to local generated version of parameters.all.xml //-->
                <!-- WAF build places it in bin/default/docs-xml/smbdotconf/parameters.all.xml //-->
                <!-- and we redirect there via use of XML_CATALOG_FILES, see docs-xml/build/catalog.xml.in //-->
                <xi:include href="http://www.samba.org/samba/smbdotconf/parameters.all.xml" parse="xml"/>
        </samba:parameterlist>

</refsect1>

<refsect1>
        <title>WARNINGS</title>
        
        <para>
        Although the configuration file permits service names to contain spaces, your client software may not.
        Spaces will be ignored in comparisons anyway, so it shouldn't be a problem - but be aware of the possibility.
        </para>

        <para>
        On a similar note, many clients - especially DOS clients - limit service names to eight characters.
        <citerefentry><refentrytitle>smbd</refentrytitle> <manvolnum>8</manvolnum></citerefentry> has no such
        limitation, but attempts to connect from such clients will fail if they truncate the service names.  For this
        reason you should probably keep your service names down to eight characters in length.
        </para>

        <para>
        Use of the <literal>[homes]</literal> and <literal>[printers]</literal> special sections make life 
        for an administrator easy, but the various combinations of default attributes can be tricky. Take extreme
        care when designing these sections. In particular, ensure that the permissions on spool directories are
        correct.
        </para>

</refsect1>

<refsect1>
        <title>VERSION</title>

        <para>This man page is correct for version 4 of the Samba suite.</para>
</refsect1>

<refsect1>
        <title>SEE ALSO</title>
        <para>
        <citerefentry><refentrytitle>samba</refentrytitle>
        <manvolnum>7</manvolnum></citerefentry>, <citerefentry><refentrytitle>smbpasswd</refentrytitle>
        <manvolnum>8</manvolnum></citerefentry>, <citerefentry><refentrytitle>smbd</refentrytitle>
        <manvolnum>8</manvolnum></citerefentry>, <citerefentry><refentrytitle>nmbd</refentrytitle>
        <manvolnum>8</manvolnum></citerefentry>, <citerefentry><refentrytitle>winbindd</refentrytitle>
        <manvolnum>8</manvolnum></citerefentry>, <citerefentry><refentrytitle>samba</refentrytitle>
        <manvolnum>8</manvolnum></citerefentry>, <citerefentry><refentrytitle>samba-tool</refentrytitle>
        <manvolnum>8</manvolnum></citerefentry>, <citerefentry><refentrytitle>smbclient</refentrytitle>
        <manvolnum>1</manvolnum></citerefentry>, <citerefentry><refentrytitle>nmblookup</refentrytitle>
        <manvolnum>1</manvolnum></citerefentry>, <citerefentry><refentrytitle>testparm</refentrytitle>
        <manvolnum>1</manvolnum></citerefentry>.</para>
</refsect1>

<refsect1>
        <title>AUTHOR</title>
        
        <para>
        The original Samba software and related utilities were created by Andrew Tridgell. Samba is now developed
        by the Samba Team as an Open Source project similar to the way the Linux kernel is developed.
        </para>
        
        <para>
        The original Samba man pages were written by Karl Auer. The man page sources were converted to YODL format (another 
        excellent piece of Open Source software, available at <ulink noescape="1" url="ftp://ftp.icce.rug.nl/pub/unix/">
        ftp://ftp.icce.rug.nl/pub/unix/</ulink>) and updated for the Samba 2.0 release by Jeremy Allison.  The conversion
        to DocBook for Samba 2.2 was done by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 was done by
        Alexander Bokovoy.
        </para>
</refsect1>

</refentry>