selftest/target/Samba3.pm

   1 #!/usr/bin/perl
   2 # Bootstrap Samba and run a number of tests against it.
   3 # Copyright (C) 2005-2007 Jelmer Vernooij <jelmer@samba.org>
   4 # Published under the GNU GPL, v3 or later.
   5
   6 package Samba3;
   7
   8 use strict;
   9 use Cwd qw(abs_path);
  10 use FindBin qw($RealBin);
  11 use POSIX;
  12 use target::Samba;
  13 use File::Path 'remove_tree';
  14
  15 sub have_ads($) {
  16         my ($self) = @_;
  17         my $found_ads = 0;
  18         my $smbd_build_options = Samba::bindir_path($self, "smbd") . " -b|";
  19         open(IN, $smbd_build_options) or die("Unable to run $smbd_build_options: $!");
  20
  21         while (<IN>) {
  22                 if (/WITH_ADS/) {
  23                        $found_ads = 1;
  24                 }
  25         }
  26         close IN;
  27
  28         # If we were not built with ADS support, pretend we were never even available
  29         print "smbd does not have ADS support\n" unless $found_ads;
  30         return $found_ads;
  31 }
  32
  33 # return smb.conf parameters applicable to @path, based on the underlying
  34 # filesystem type
  35 sub get_fs_specific_conf($$)
  36 {
  37         my ($self, $path) = @_;
  38         my $mods = "";
  39         my $stat_out = `stat --file-system $path` or return "";
  40
  41         if ($stat_out =~ m/Type:\s+btrfs/) {
  42                 $mods .= "streams_xattr btrfs";
  43         }
  44
  45         if ($mods) {
  46                 return "vfs objects = $mods";
  47         }
  48
  49         return undef;
  50 }
  51
  52 sub new($$) {
  53         my ($classname, $bindir, $srcdir, $server_maxtime) = @_;
  54         my $self = { vars => {},
  55                      bindir => $bindir,
  56                      srcdir => $srcdir,
  57                      server_maxtime => $server_maxtime
  58         };
  59         bless $self;
  60         return $self;
  61 }
  62
  63 sub teardown_env($$)
  64 {
  65         my ($self, $envvars) = @_;
  66         my $count = 0;
  67
  68         # This should cause smbd to terminate gracefully
  69         close($envvars->{STDIN_PIPE});
  70
  71         my $smbdpid = $envvars->{SMBD_TL_PID};
  72         my $nmbdpid = $envvars->{NMBD_TL_PID};
  73         my $winbinddpid = $envvars->{WINBINDD_TL_PID};
  74
  75         # This should give it time to write out the gcov data
  76         until ($count > 20) {
  77             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  78             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
  79             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
  80             if ($smbdchild == -1
  81                 && $nmbdchild == -1
  82                 && $winbinddchild == -1) {
  83                 last;
  84             }
  85             sleep(1);
  86             $count++;
  87         }
  88
  89         if ($count <= 20 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
  90             return;
  91         }
  92
  93         $self->stop_sig_term($smbdpid);
  94         $self->stop_sig_term($nmbdpid);
  95         $self->stop_sig_term($winbinddpid);
  96
  97         $count = 0;
  98         until ($count > 10) {
  99             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
 100             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
 101             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
 102             if ($smbdchild == -1
 103                 && $nmbdchild == -1
 104                 && $winbinddchild == -1) {
 105                 last;
 106             }
 107             sleep(1);
 108             $count++;
 109         }
 110
 111         if ($count <= 10 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
 112             return;
 113         }
 114
 115         warn("timelimit process did not quit on SIGTERM, sending SIGKILL");
 116         $self->stop_sig_kill($smbdpid);
 117         $self->stop_sig_kill($nmbdpid);
 118         $self->stop_sig_kill($winbinddpid);
 119
 120         return 0;
 121 }
 122
 123 sub getlog_env_app($$$)
 124 {
 125         my ($self, $envvars, $name) = @_;
 126
 127         my $title = "$name LOG of: $envvars->{NETBIOSNAME}\n";
 128         my $out = $title;
 129
 130         open(LOG, "<".$envvars->{$name."_TEST_LOG"});
 131
 132         seek(LOG, $envvars->{$name."_TEST_LOG_POS"}, SEEK_SET);
 133         while (<LOG>) {
 134                 $out .= $_;
 135         }
 136         $envvars->{$name."_TEST_LOG_POS"} = tell(LOG);
 137         close(LOG);
 138
 139         return "" if $out eq $title;
 140
 141         return $out;
 142 }
 143
 144 sub getlog_env($$)
 145 {
 146         my ($self, $envvars) = @_;
 147         my $ret = "";
 148
 149         $ret .= $self->getlog_env_app($envvars, "SMBD");
 150         $ret .= $self->getlog_env_app($envvars, "NMBD");
 151         $ret .= $self->getlog_env_app($envvars, "WINBINDD");
 152
 153         return $ret;
 154 }
 155
 156 sub check_env($$)
 157 {
 158         my ($self, $envvars) = @_;
 159
 160         my $childpid = waitpid(-1, WNOHANG);
 161
 162         # TODO ...
 163         return 1;
 164 }
 165
 166 sub setup_env($$$)
 167 {
 168         my ($self, $envname, $path) = @_;
 169
 170         $ENV{ENVNAME} = $envname;
 171
 172         if (defined($self->{vars}->{$envname})) {
 173                 return $self->{vars}->{$envname};
 174         }
 175
 176         #
 177         # Avoid hitting system krb5.conf -
 178         # An env that needs Kerberos will reset this to the real
 179         # value.
 180         #
 181         $ENV{KRB5_CONFIG} = "$path/no_krb5.conf";
 182
 183         if ($envname eq "nt4_dc") {
 184                 return $self->setup_nt4_dc("$path/nt4_dc");
 185         } elsif ($envname eq "nt4_dc_schannel") {
 186                 return $self->setup_nt4_dc_schannel("$path/nt4_dc_schannel");
 187         } elsif ($envname eq "simpleserver") {
 188                 return $self->setup_simpleserver("$path/simpleserver");
 189         } elsif ($envname eq "fileserver") {
 190                 return $self->setup_fileserver("$path/fileserver");
 191         } elsif ($envname eq "maptoguest") {
 192                 return $self->setup_maptoguest("$path/maptoguest");
 193         } elsif ($envname eq "ktest") {
 194                 return $self->setup_ktest("$path/ktest");
 195         } elsif ($envname eq "nt4_member") {
 196                 if (not defined($self->{vars}->{nt4_dc})) {
 197                         if (not defined($self->setup_nt4_dc("$path/nt4_dc"))) {
 198                                 return undef;
 199                         }
 200                 }
 201                 return $self->setup_nt4_member("$path/nt4_member", $self->{vars}->{nt4_dc});
 202         } else {
 203                 return "UNKNOWN";
 204         }
 205 }
 206
 207 sub setup_nt4_dc($$)
 208 {
 209         my ($self, $path) = @_;
 210
 211         print "PROVISIONING NT4 DC...";
 212
 213         my $nt4_dc_options = "
 214         domain master = yes
 215         domain logons = yes
 216         lanman auth = yes
 217         ntlm auth = yes
 218         raw NTLMv2 auth = yes
 219
 220         rpc_server:epmapper = external
 221         rpc_server:spoolss = external
 222         rpc_server:lsarpc = external
 223         rpc_server:samr = external
 224         rpc_server:netlogon = external
 225         rpc_server:register_embedded_np = yes
 226         rpc_server:FssagentRpc = external
 227
 228         rpc_daemon:epmd = fork
 229         rpc_daemon:spoolssd = fork
 230         rpc_daemon:lsasd = fork
 231         rpc_daemon:fssd = fork
 232         fss: sequence timeout = 1
 233 ";
 234
 235         my $vars = $self->provision($path, "SAMBA-TEST",
 236                                     "LOCALNT4DC2",
 237                                     "localntdc2pass",
 238                                     $nt4_dc_options);
 239
 240         $vars or return undef;
 241
 242         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 243                return undef;
 244         }
 245
 246         $vars->{DC_SERVER} = $vars->{SERVER};
 247         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 248         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 249         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 250         $vars->{DC_USERNAME} = $vars->{USERNAME};
 251         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 252
 253         $self->{vars}->{nt4_dc} = $vars;
 254
 255         return $vars;
 256 }
 257
 258 sub setup_nt4_dc_schannel($$)
 259 {
 260         my ($self, $path) = @_;
 261
 262         print "PROVISIONING NT4 DC WITH SERVER SCHANNEL ...";
 263
 264         my $pdc_options = "
 265         domain master = yes
 266         domain logons = yes
 267         lanman auth = yes
 268
 269         rpc_server:epmapper = external
 270         rpc_server:spoolss = external
 271         rpc_server:lsarpc = external
 272         rpc_server:samr = external
 273         rpc_server:netlogon = external
 274         rpc_server:register_embedded_np = yes
 275
 276         rpc_daemon:epmd = fork
 277         rpc_daemon:spoolssd = fork
 278         rpc_daemon:lsasd = fork
 279
 280         server schannel = yes
 281         # used to reproduce bug #12772
 282         server max protocol = SMB2_02
 283 ";
 284
 285         my $vars = $self->provision($path, "NT4SCHANNEL",
 286                                     "LOCALNT4DC9",
 287                                     "localntdc9pass",
 288                                     $pdc_options);
 289
 290         $vars or return undef;
 291
 292         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 293                return undef;
 294         }
 295
 296         $vars->{DC_SERVER} = $vars->{SERVER};
 297         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 298         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 299         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 300         $vars->{DC_USERNAME} = $vars->{USERNAME};
 301         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 302
 303         $self->{vars}->{nt4_dc_schannel} = $vars;
 304
 305         return $vars;
 306 }
 307
 308 sub setup_nt4_member($$$)
 309 {
 310         my ($self, $prefix, $nt4_dc_vars) = @_;
 311         my $count = 0;
 312         my $rc;
 313
 314         print "PROVISIONING MEMBER...";
 315
 316         my $require_mutexes = "dbwrap_tdb_require_mutexes:* = yes";
 317         $require_mutexes = "" if ($ENV{SELFTEST_DONT_REQUIRE_TDB_MUTEX_SUPPORT} eq "1");
 318
 319         my $member_options = "
 320         security = domain
 321         dbwrap_tdb_mutexes:* = yes
 322         ${require_mutexes}
 323 ";
 324         my $ret = $self->provision($prefix, $nt4_dc_vars->{DOMAIN},
 325                                    "LOCALNT4MEMBER3",
 326                                    "localnt4member3pass",
 327                                    $member_options);
 328
 329         $ret or return undef;
 330
 331         my $nmblookup = Samba::bindir_path($self, "nmblookup");
 332         do {
 333                 print "Waiting for the LOGON SERVER registration ...\n";
 334                 $rc = system("$nmblookup $ret->{CONFIGURATION} $ret->{DOMAIN}\#1c");
 335                 if ($rc != 0) {
 336                         sleep(1);
 337                 }
 338                 $count++;
 339         } while ($rc != 0 && $count < 10);
 340         if ($count == 10) {
 341                 print "NMBD not reachable after 10 retries\n";
 342                 teardown_env($self, $ret);
 343                 return 0;
 344         }
 345
 346         my $net = Samba::bindir_path($self, "net");
 347         my $cmd = "";
 348         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 349         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 350         $cmd .= "$net join $ret->{CONFIGURATION} $nt4_dc_vars->{DOMAIN} member";
 351         $cmd .= " -U$nt4_dc_vars->{USERNAME}\%$nt4_dc_vars->{PASSWORD}";
 352
 353         if (system($cmd) != 0) {
 354             warn("Join failed\n$cmd");
 355             return undef;
 356         }
 357
 358         my $cmd = "";
 359         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 360         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 361         $cmd .= "$net $ret->{CONFIGURATION} primarytrust dumpinfo | grep -q 'REDACTED SECRET VALUES'";
 362
 363         if (system($cmd) != 0) {
 364             warn("check failed\n$cmd");
 365             return undef;
 366         }
 367
 368         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 369                return undef;
 370         }
 371
 372         $ret->{DC_SERVER} = $nt4_dc_vars->{SERVER};
 373         $ret->{DC_SERVER_IP} = $nt4_dc_vars->{SERVER_IP};
 374         $ret->{DC_SERVER_IPV6} = $nt4_dc_vars->{SERVER_IPV6};
 375         $ret->{DC_NETBIOSNAME} = $nt4_dc_vars->{NETBIOSNAME};
 376         $ret->{DC_USERNAME} = $nt4_dc_vars->{USERNAME};
 377         $ret->{DC_PASSWORD} = $nt4_dc_vars->{PASSWORD};
 378
 379         return $ret;
 380 }
 381
 382 sub setup_admember($$$$)
 383 {
 384         my ($self, $prefix, $dcvars) = @_;
 385
 386         my $prefix_abs = abs_path($prefix);
 387         my @dirs = ();
 388
 389         # If we didn't build with ADS, pretend this env was never available
 390         if (not $self->have_ads()) {
 391                 return "UNKNOWN";
 392         }
 393
 394         print "PROVISIONING S3 AD MEMBER...";
 395
 396         mkdir($prefix_abs, 0777);
 397
 398         my $share_dir="$prefix_abs/share";
 399         push(@dirs, $share_dir);
 400
 401         my $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}";
 402         push(@dirs, $substitution_path);
 403
 404         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/U_alice";
 405         push(@dirs, $substitution_path);
 406
 407         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/U_alice/G_domain users";
 408         push(@dirs, $substitution_path);
 409
 410         # Using '/' as the winbind separator is a bad idea ...
 411         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/u_$dcvars->{DOMAIN}";
 412         push(@dirs, $substitution_path);
 413
 414         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/u_$dcvars->{DOMAIN}/alice";
 415         push(@dirs, $substitution_path);
 416
 417         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/u_$dcvars->{DOMAIN}/alice/g_$dcvars->{DOMAIN}";
 418         push(@dirs, $substitution_path);
 419
 420         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/u_$dcvars->{DOMAIN}/alice/g_$dcvars->{DOMAIN}/domain users";
 421         push(@dirs, $substitution_path);
 422
 423         my $member_options = "
 424         security = ads
 425         workgroup = $dcvars->{DOMAIN}
 426         realm = $dcvars->{REALM}
 427         netbios aliases = foo bar
 428         template homedir = /home/%D/%G/%U
 429
 430 [sub_dug]
 431         path = $share_dir/D_%D/U_%U/G_%G
 432         writeable = yes
 433
 434 [sub_dug2]
 435         path = $share_dir/D_%D/u_%u/g_%g
 436         writeable = yes
 437
 438 ";
 439
 440         my $ret = $self->provision($prefix, $dcvars->{DOMAIN},
 441                                    "LOCALADMEMBER",
 442                                    "loCalMemberPass",
 443                                    $member_options,
 444                                    $dcvars->{SERVER_IP},
 445                                    $dcvars->{SERVER_IPV6});
 446
 447         $ret or return undef;
 448
 449         mkdir($_, 0777) foreach(@dirs);
 450
 451         close(USERMAP);
 452         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 453         $ret->{REALM} = $dcvars->{REALM};
 454
 455         my $ctx;
 456         $ctx = {};
 457         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 458         $ctx->{domain} = $dcvars->{DOMAIN};
 459         $ctx->{realm} = $dcvars->{REALM};
 460         $ctx->{dnsname} = lc($dcvars->{REALM});
 461         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 462         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 463         $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
 464         Samba::mk_krb5_conf($ctx, "");
 465
 466         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 467
 468         my $net = Samba::bindir_path($self, "net");
 469         my $cmd = "";
 470         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 471         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 472                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 473         } else {
 474                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 475         }
 476         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 477         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 478         $cmd .= "$net join $ret->{CONFIGURATION}";
 479         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 480
 481         if (system($cmd) != 0) {
 482             warn("Join failed\n$cmd");
 483             return undef;
 484         }
 485
 486         # We need world access to this share, as otherwise the domain
 487         # administrator from the AD domain provided by Samba4 can't
 488         # access the share for tests.
 489         chmod 0777, "$prefix/share";
 490
 491         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 492                 return undef;
 493         }
 494
 495         $ret->{DC_SERVER} = $dcvars->{SERVER};
 496         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 497         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 498         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 499         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 500         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 501
 502         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 503         $ret->{target} = $self;
 504
 505         return $ret;
 506 }
 507
 508 sub setup_admember_rfc2307($$$$)
 509 {
 510         my ($self, $prefix, $dcvars) = @_;
 511
 512         # If we didn't build with ADS, pretend this env was never available
 513         if (not $self->have_ads()) {
 514                 return "UNKNOWN";
 515         }
 516
 517         print "PROVISIONING S3 AD MEMBER WITH idmap_rfc2307 config...";
 518
 519         my $member_options = "
 520         security = ads
 521         workgroup = $dcvars->{DOMAIN}
 522         realm = $dcvars->{REALM}
 523         idmap cache time = 0
 524         idmap negative cache time = 0
 525         idmap config * : backend = autorid
 526         idmap config * : range = 1000000-1999999
 527         idmap config * : rangesize = 100000
 528         idmap config $dcvars->{DOMAIN} : backend = rfc2307
 529         idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
 530         idmap config $dcvars->{DOMAIN} : ldap_server = ad
 531         idmap config $dcvars->{DOMAIN} : bind_path_user = ou=idmap,dc=samba,dc=example,dc=com
 532         idmap config $dcvars->{DOMAIN} : bind_path_group = ou=idmap,dc=samba,dc=example,dc=com
 533
 534         password server = $dcvars->{SERVER}
 535 ";
 536
 537         my $ret = $self->provision($prefix, $dcvars->{DOMAIN},
 538                                    "RFC2307MEMBER",
 539                                    "loCalMemberPass",
 540                                    $member_options,
 541                                    $dcvars->{SERVER_IP},
 542                                    $dcvars->{SERVER_IPV6});
 543
 544         $ret or return undef;
 545
 546         close(USERMAP);
 547         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 548         $ret->{REALM} = $dcvars->{REALM};
 549
 550         my $ctx;
 551         my $prefix_abs = abs_path($prefix);
 552         $ctx = {};
 553         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 554         $ctx->{domain} = $dcvars->{DOMAIN};
 555         $ctx->{realm} = $dcvars->{REALM};
 556         $ctx->{dnsname} = lc($dcvars->{REALM});
 557         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 558         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 559         $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
 560         Samba::mk_krb5_conf($ctx, "");
 561
 562         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 563
 564         my $net = Samba::bindir_path($self, "net");
 565         my $cmd = "";
 566         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 567         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 568                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 569         } else {
 570                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 571         }
 572         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 573         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 574         $cmd .= "$net join $ret->{CONFIGURATION}";
 575         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 576
 577         if (system($cmd) != 0) {
 578             warn("Join failed\n$cmd");
 579             return undef;
 580         }
 581
 582         # We need world access to this share, as otherwise the domain
 583         # administrator from the AD domain provided by Samba4 can't
 584         # access the share for tests.
 585         chmod 0777, "$prefix/share";
 586
 587         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 588                 return undef;
 589         }
 590
 591         $ret->{DC_SERVER} = $dcvars->{SERVER};
 592         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 593         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 594         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 595         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 596         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 597
 598         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 599         $ret->{target} = $self;
 600
 601         return $ret;
 602 }
 603
 604 sub setup_ad_member_idmap_rid($$$$)
 605 {
 606         my ($self, $prefix, $dcvars) = @_;
 607
 608         # If we didn't build with ADS, pretend this env was never available
 609         if (not $self->have_ads()) {
 610                 return "UNKNOWN";
 611         }
 612
 613         print "PROVISIONING S3 AD MEMBER WITH idmap_rid config...";
 614
 615         my $member_options = "
 616         security = ads
 617         workgroup = $dcvars->{DOMAIN}
 618         realm = $dcvars->{REALM}
 619         idmap config * : backend = tdb
 620         idmap config * : range = 1000000-1999999
 621         idmap config $dcvars->{DOMAIN} : backend = rid
 622         idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
 623 ";
 624
 625         my $ret = $self->provision($prefix, $dcvars->{DOMAIN},
 626                                    "IDMAPRIDMEMBER",
 627                                    "loCalMemberPass",
 628                                    $member_options,
 629                                    $dcvars->{SERVER_IP},
 630                                    $dcvars->{SERVER_IPV6});
 631
 632         $ret or return undef;
 633
 634         close(USERMAP);
 635         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 636         $ret->{REALM} = $dcvars->{REALM};
 637
 638         my $ctx;
 639         my $prefix_abs = abs_path($prefix);
 640         $ctx = {};
 641         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 642         $ctx->{domain} = $dcvars->{DOMAIN};
 643         $ctx->{realm} = $dcvars->{REALM};
 644         $ctx->{dnsname} = lc($dcvars->{REALM});
 645         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 646         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 647         $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
 648         Samba::mk_krb5_conf($ctx, "");
 649
 650         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 651
 652         my $net = Samba::bindir_path($self, "net");
 653         my $cmd = "";
 654         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 655         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 656                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 657         } else {
 658                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 659         }
 660         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 661         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 662         $cmd .= "$net join $ret->{CONFIGURATION}";
 663         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 664
 665         if (system($cmd) != 0) {
 666             warn("Join failed\n$cmd");
 667             return undef;
 668         }
 669
 670         # We need world access to this share, as otherwise the domain
 671         # administrator from the AD domain provided by Samba4 can't
 672         # access the share for tests.
 673         chmod 0777, "$prefix/share";
 674
 675         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 676                 return undef;
 677         }
 678
 679         $ret->{DC_SERVER} = $dcvars->{SERVER};
 680         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 681         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 682         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 683         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 684         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 685
 686         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 687         $ret->{target} = $self;
 688
 689         return $ret;
 690 }
 691
 692 sub setup_simpleserver($$)
 693 {
 694         my ($self, $path) = @_;
 695
 696         print "PROVISIONING simple server...";
 697
 698         my $prefix_abs = abs_path($path);
 699
 700         my $simpleserver_options = "
 701         lanman auth = yes
 702         ntlm auth = yes
 703         vfs objects = xattr_tdb streams_depot time_audit full_audit
 704         change notify = no
 705         smb encrypt = off
 706
 707         full_audit:syslog = no
 708         full_audit:success = none
 709         full_audit:failure = none
 710
 711 [vfs_aio_fork]
 712         path = $prefix_abs/share
 713         vfs objects = aio_fork
 714         read only = no
 715         vfs_aio_fork:erratic_testing_mode=yes
 716
 717 [dosmode]
 718         path = $prefix_abs/share
 719         vfs objects =
 720         store dos attributes = yes
 721         hide files = /hidefile/
 722         hide dot files = yes
 723
 724 [enc_desired]
 725         path = $prefix_abs/share
 726         vfs objects =
 727         smb encrypt = desired
 728 ";
 729
 730         my $vars = $self->provision($path, "WORKGROUP",
 731                                     "LOCALSHARE4",
 732                                     "local4pass",
 733                                     $simpleserver_options);
 734
 735         $vars or return undef;
 736
 737         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 738                return undef;
 739         }
 740
 741         $self->{vars}->{simpleserver} = $vars;
 742
 743         return $vars;
 744 }
 745
 746 sub setup_fileserver($$)
 747 {
 748         my ($self, $path) = @_;
 749         my $prefix_abs = abs_path($path);
 750         my $srcdir_abs = abs_path($self->{srcdir});
 751
 752         print "PROVISIONING file server ...\n";
 753
 754         my @dirs = ();
 755
 756         mkdir($prefix_abs, 0777);
 757
 758         my $usershare_dir="$prefix_abs/lib/usershare";
 759
 760         mkdir("$prefix_abs/lib", 0755);
 761         remove_tree($usershare_dir);
 762         mkdir($usershare_dir, 01770);
 763
 764         my $share_dir="$prefix_abs/share";
 765
 766         # Create share directory structure
 767         my $lower_case_share_dir="$share_dir/lower-case";
 768         push(@dirs, $lower_case_share_dir);
 769
 770         my $lower_case_share_dir_30000="$share_dir/lower-case-30000";
 771         push(@dirs, $lower_case_share_dir_30000);
 772
 773         my $dfree_share_dir="$share_dir/dfree";
 774         push(@dirs, $dfree_share_dir);
 775         push(@dirs, "$dfree_share_dir/subdir1");
 776         push(@dirs, "$dfree_share_dir/subdir2");
 777         push(@dirs, "$dfree_share_dir/subdir3");
 778
 779         my $valid_users_sharedir="$share_dir/valid_users";
 780         push(@dirs,$valid_users_sharedir);
 781
 782         my $offline_sharedir="$share_dir/offline";
 783         push(@dirs,$offline_sharedir);
 784
 785         my $force_user_valid_users_dir = "$share_dir/force_user_valid_users";
 786         push(@dirs, $force_user_valid_users_dir);
 787
 788         my $smbget_sharedir="$share_dir/smbget";
 789         push(@dirs,$smbget_sharedir);
 790
 791         my $tarmode_sharedir="$share_dir/tarmode";
 792         push(@dirs,$tarmode_sharedir);
 793
 794         my $usershare_sharedir="$share_dir/usershares";
 795         push(@dirs,$usershare_sharedir);
 796
 797         my $fileserver_options = "
 798         usershare path = $usershare_dir
 799         usershare max shares = 10
 800         usershare allow guests = yes
 801         usershare prefix allow list = $usershare_sharedir
 802
 803 [lowercase]
 804         path = $lower_case_share_dir
 805         comment = smb username is [%U]
 806         case sensitive = True
 807         default case = lower
 808         preserve case = no
 809         short preserve case = no
 810 [lowercase-30000]
 811         path = $lower_case_share_dir_30000
 812         comment = smb username is [%U]
 813         case sensitive = True
 814         default case = lower
 815         preserve case = no
 816         short preserve case = no
 817 [dfree]
 818         path = $dfree_share_dir
 819         comment = smb username is [%U]
 820         dfree command = $srcdir_abs/testprogs/blackbox/dfree.sh
 821 [valid-users-access]
 822         path = $valid_users_sharedir
 823         valid users = +userdup
 824 [offline]
 825         path = $offline_sharedir
 826         vfs objects = offline
 827
 828 # BUG: https://bugzilla.samba.org/show_bug.cgi?id=9878
 829 # RH BUG: https://bugzilla.redhat.com/show_bug.cgi?id=1077651
 830 [force_user_valid_users]
 831         path = $force_user_valid_users_dir
 832         comment = force user with valid users combination test share
 833         valid users = +force_user
 834         force user = force_user
 835         force group = everyone
 836         write list = force_user
 837
 838 [smbget]
 839         path = $smbget_sharedir
 840         comment = smb username is [%U]
 841         guest ok = yes
 842 [ign_sysacls]
 843         path = $share_dir
 844         comment = ignore system acls
 845         acl_xattr:ignore system acls = yes
 846 [inherit_owner]
 847         path = $share_dir
 848         comment = inherit owner
 849         inherit owner = yes
 850 [inherit_owner_u]
 851         path = $share_dir
 852         comment = inherit only unix owner
 853         inherit owner = unix only
 854         acl_xattr:ignore system acls = yes
 855 ";
 856
 857         my $vars = $self->provision($path, "WORKGROUP",
 858                                     "FILESERVER",
 859                                     "fileserver",
 860                                     $fileserver_options,
 861                                     undef,
 862                                     undef,
 863                                     1);
 864
 865         $vars or return undef;
 866
 867         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 868                return undef;
 869         }
 870
 871         $self->{vars}->{fileserver} = $vars;
 872
 873         mkdir($_, 0777) foreach(@dirs);
 874
 875         ## Create case sensitive lower case share dir
 876         foreach my $file ('a'..'z') {
 877                 my $full_path = $lower_case_share_dir . '/' . $file;
 878                 open my $fh, '>', $full_path;
 879                 # Add some content to file
 880                 print $fh $full_path;
 881                 close $fh;
 882         }
 883
 884         for (my $file = 1; $file < 51; ++$file) {
 885                 my $full_path = $lower_case_share_dir . '/' . $file;
 886                 open my $fh, '>', $full_path;
 887                 # Add some content to file
 888                 print $fh $full_path;
 889                 close $fh;
 890         }
 891
 892         # Create content for 30000 share
 893         foreach my $file ('a'..'z') {
 894                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
 895                 open my $fh, '>', $full_path;
 896                 # Add some content to file
 897                 print $fh $full_path;
 898                 close $fh;
 899         }
 900
 901         for (my $file = 1; $file < 30001; ++$file) {
 902                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
 903                 open my $fh, '>', $full_path;
 904                 # Add some content to file
 905                 print $fh $full_path;
 906                 close $fh;
 907         }
 908
 909         ##
 910         ## create a listable file in valid_users_share
 911         ##
 912         my $valid_users_target = "$valid_users_sharedir/foo";
 913         unless (open(VALID_USERS_TARGET, ">$valid_users_target")) {
 914                 warn("Unable to open $valid_users_target");
 915                 return undef;
 916         }
 917         close(VALID_USERS_TARGET);
 918         chmod 0644, $valid_users_target;
 919
 920         return $vars;
 921 }
 922
 923 sub setup_ktest($$$)
 924 {
 925         my ($self, $prefix) = @_;
 926
 927         # If we didn't build with ADS, pretend this env was never available
 928         if (not $self->have_ads()) {
 929                 return "UNKNOWN";
 930         }
 931
 932         print "PROVISIONING server with security=ads...";
 933
 934         my $ktest_options = "
 935         workgroup = KTEST
 936         realm = ktest.samba.example.com
 937         security = ads
 938         username map = $prefix/lib/username.map
 939         server signing = required
 940         server min protocol = SMB3_00
 941         client max protocol = SMB3
 942 ";
 943
 944         my $ret = $self->provision($prefix, "KTEST",
 945                                    "LOCALKTEST6",
 946                                    "localktest6pass",
 947                                    $ktest_options);
 948
 949         $ret or return undef;
 950
 951         my $ctx;
 952         my $prefix_abs = abs_path($prefix);
 953         $ctx = {};
 954         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 955         $ctx->{domain} = "KTEST";
 956         $ctx->{realm} = "KTEST.SAMBA.EXAMPLE.COM";
 957         $ctx->{dnsname} = lc($ctx->{realm});
 958         $ctx->{kdc_ipv4} = "0.0.0.0";
 959         $ctx->{kdc_ipv6} = "::";
 960         $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
 961         Samba::mk_krb5_conf($ctx, "");
 962
 963         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 964
 965         open(USERMAP, ">$prefix/lib/username.map") or die("Unable to open $prefix/lib/username.map");
 966         print USERMAP "
 967 $ret->{USERNAME} = KTEST\\Administrator
 968 ";
 969         close(USERMAP);
 970
 971 #This is the secrets.tdb created by 'net ads join' from Samba3 to a
 972 #Samba4 DC with the same parameters as are being used here.  The
 973 #domain SID is S-1-5-21-1071277805-689288055-3486227160
 974
 975         system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb $prefix/private/secrets.tdb");
 976         chmod 0600, "$prefix/private/secrets.tdb";
 977
 978 #Make sure there's no old ntdb file.
 979         system("rm -f $prefix/private/secrets.ntdb");
 980
 981 #This uses a pre-calculated krb5 credentials cache, obtained by running Samba4 with:
 982 # "--option=kdc:service ticket lifetime=239232" "--option=kdc:user ticket lifetime=239232" "--option=kdc:renewal lifetime=239232"
 983 #
 984 #and having in krb5.conf:
 985 # ticket_lifetime = 799718400
 986 # renew_lifetime = 799718400
 987 #
 988 # The commands for the -2 keytab where were:
 989 # kinit administrator@KTEST.SAMBA.EXAMPLE.COM
 990 # kvno host/localktest6@KTEST.SAMBA.EXAMPLE.COM
 991 # kvno cifs/localktest6@KTEST.SAMBA.EXAMPLE.COM
 992 # kvno host/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 993 # kvno cifs/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 994 #
 995 # and then for the -3 keytab, I did
 996 #
 997 # net changetrustpw; kdestroy and the same again.
 998 #
 999 # This creates a credential cache with a very long lifetime (2036 at
1000 # at 2011-04), and shows that running 'net changetrustpw' does not
1001 # break existing logins (for the secrets.tdb method at least).
1002 #
1003
1004         $ret->{KRB5_CCACHE}="FILE:$prefix/krb5_ccache";
1005
1006         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-2 $prefix/krb5_ccache-2");
1007         chmod 0600, "$prefix/krb5_ccache-2";
1008
1009         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-3 $prefix/krb5_ccache-3");
1010         chmod 0600, "$prefix/krb5_ccache-3";
1011
1012         # We need world access to this share, as otherwise the domain
1013         # administrator from the AD domain provided by ktest can't
1014         # access the share for tests.
1015         chmod 0777, "$prefix/share";
1016
1017         if (not $self->check_or_start($ret, "yes", "no", "yes")) {
1018                return undef;
1019         }
1020         return $ret;
1021 }
1022
1023 sub setup_maptoguest($$)
1024 {
1025         my ($self, $path) = @_;
1026
1027         print "PROVISIONING maptoguest...";
1028
1029         my $options = "
1030 map to guest = bad user
1031 ntlm auth = yes
1032 ";
1033
1034         my $vars = $self->provision($path, "WORKGROUP",
1035                                     "maptoguest",
1036                                     "maptoguestpass",
1037                                     $options);
1038
1039         $vars or return undef;
1040
1041         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
1042                return undef;
1043         }
1044
1045         $self->{vars}->{s3maptoguest} = $vars;
1046
1047         return $vars;
1048 }
1049
1050 sub stop_sig_term($$) {
1051         my ($self, $pid) = @_;
1052         kill("USR1", $pid) or kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
1053 }
1054
1055 sub stop_sig_kill($$) {
1056         my ($self, $pid) = @_;
1057         kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
1058 }
1059
1060 sub write_pid($$$)
1061 {
1062         my ($env_vars, $app, $pid) = @_;
1063
1064         open(PID, ">$env_vars->{PIDDIR}/timelimit.$app.pid");
1065         print PID $pid;
1066         close(PID);
1067 }
1068
1069 sub read_pid($$)
1070 {
1071         my ($env_vars, $app) = @_;
1072
1073         open(PID, "<$env_vars->{PIDDIR}/timelimit.$app.pid");
1074         my $pid = <PID>;
1075         close(PID);
1076         return $pid;
1077 }
1078
1079 sub check_or_start($$$$$) {
1080         my ($self, $env_vars, $nmbd, $winbindd, $smbd) = @_;
1081
1082         # use a pipe for stdin in the child processes. This allows
1083         # those processes to monitor the pipe for EOF to ensure they
1084         # exit when the test script exits
1085         pipe(STDIN_READER, $env_vars->{STDIN_PIPE});
1086
1087         unlink($env_vars->{NMBD_TEST_LOG});
1088         print "STARTING NMBD...";
1089         my $pid = fork();
1090         if ($pid == 0) {
1091                 open STDOUT, ">$env_vars->{NMBD_TEST_LOG}";
1092                 open STDERR, '>&STDOUT';
1093
1094                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
1095
1096                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
1097                 $ENV{KRB5CCNAME} = "$env_vars->{KRB5_CCACHE}.nmbd";
1098                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
1099                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
1100
1101                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
1102                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
1103                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
1104                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
1105                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
1106                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
1107                 $ENV{UID_WRAPPER_ROOT} = "1";
1108
1109                 $ENV{ENVNAME} = "$ENV{ENVNAME}.nmbd";
1110
1111                 if ($nmbd ne "yes") {
1112                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
1113                                 my $signame = shift;
1114                                 print("Skip nmbd received signal $signame");
1115                                 exit 0;
1116                         };
1117                         sleep($self->{server_maxtime});
1118                         exit 0;
1119                 }
1120
1121                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
1122                 my @optargs = ("-d0");
1123                 if (defined($ENV{NMBD_OPTIONS})) {
1124                         @optargs = split(/ /, $ENV{NMBD_OPTIONS});
1125                 }
1126                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
1127                 if(defined($ENV{NMBD_VALGRIND})) {
1128                         @preargs = split(/ /, $ENV{NMBD_VALGRIND});
1129                 }
1130                 my @args = ("-F", "--no-process-group",
1131                             "-s", $env_vars->{SERVERCONFFILE},
1132                             "-l", $env_vars->{LOGDIR});
1133                 if (not defined($ENV{NMBD_DONT_LOG_STDOUT})) {
1134                         push(@args, "--log-stdout");
1135                 }
1136
1137                 close($env_vars->{STDIN_PIPE});
1138                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1139
1140                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1141                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1142         }
1143         $env_vars->{NMBD_TL_PID} = $pid;
1144         write_pid($env_vars, "nmbd", $pid);
1145         print "DONE\n";
1146
1147         unlink($env_vars->{WINBINDD_TEST_LOG});
1148         print "STARTING WINBINDD...";
1149         $pid = fork();
1150         if ($pid == 0) {
1151                 open STDOUT, ">$env_vars->{WINBINDD_TEST_LOG}";
1152                 open STDERR, '>&STDOUT';
1153
1154                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
1155
1156                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
1157                 $ENV{KRB5CCNAME} = "$env_vars->{KRB5_CCACHE}.winbindd";
1158                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
1159                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
1160
1161                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
1162                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
1163                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
1164                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
1165                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
1166                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
1167                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
1168                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
1169                 } else {
1170                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
1171                 }
1172                 $ENV{UID_WRAPPER_ROOT} = "1";
1173
1174                 $ENV{ENVNAME} = "$ENV{ENVNAME}.winbindd";
1175
1176                 if ($winbindd ne "yes") {
1177                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
1178                                 my $signame = shift;
1179                                 print("Skip winbindd received signal $signame");
1180                                 exit 0;
1181                         };
1182                         sleep($self->{server_maxtime});
1183                         exit 0;
1184                 }
1185
1186                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
1187                 my @optargs = ("-d0");
1188                 if (defined($ENV{WINBINDD_OPTIONS})) {
1189                         @optargs = split(/ /, $ENV{WINBINDD_OPTIONS});
1190                 }
1191                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
1192                 if(defined($ENV{WINBINDD_VALGRIND})) {
1193                         @preargs = split(/ /, $ENV{WINBINDD_VALGRIND});
1194                 }
1195                 my @args = ("-F", "--no-process-group",
1196                             "-s", $env_vars->{SERVERCONFFILE},
1197                             "-l", $env_vars->{LOGDIR});
1198                 if (not defined($ENV{WINBINDD_DONT_LOG_STDOUT})) {
1199                         push(@args, "--stdout");
1200                 }
1201
1202                 close($env_vars->{STDIN_PIPE});
1203                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1204
1205                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1206                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1207         }
1208         $env_vars->{WINBINDD_TL_PID} = $pid;
1209         write_pid($env_vars, "winbindd", $pid);
1210         print "DONE\n";
1211
1212         unlink($env_vars->{SMBD_TEST_LOG});
1213         print "STARTING SMBD...";
1214         $pid = fork();
1215         if ($pid == 0) {
1216                 open STDOUT, ">$env_vars->{SMBD_TEST_LOG}";
1217                 open STDERR, '>&STDOUT';
1218
1219                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
1220
1221                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
1222                 $ENV{KRB5CCNAME} = "$env_vars->{KRB5_CCACHE}.smbd";
1223                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
1224                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
1225
1226                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
1227                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
1228                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
1229                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
1230                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
1231                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
1232                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
1233                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
1234                 } else {
1235                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
1236                 }
1237                 $ENV{UID_WRAPPER_ROOT} = "1";
1238
1239                 $ENV{ENVNAME} = "$ENV{ENVNAME}.smbd";
1240
1241                 if ($smbd ne "yes") {
1242                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
1243                                 my $signame = shift;
1244                                 print("Skip smbd received signal $signame");
1245                                 exit 0;
1246                         };
1247                         sleep($self->{server_maxtime});
1248                         exit 0;
1249                 }
1250
1251                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "smbd");
1252                 my @optargs = ("-d0");
1253                 if (defined($ENV{SMBD_OPTIONS})) {
1254                         @optargs = split(/ /, $ENV{SMBD_OPTIONS});
1255                 }
1256                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
1257                 if(defined($ENV{SMBD_VALGRIND})) {
1258                         @preargs = split(/ /,$ENV{SMBD_VALGRIND});
1259                 }
1260                 my @args = ("-F", "--no-process-group",
1261                             "-s", $env_vars->{SERVERCONFFILE},
1262                             "-l", $env_vars->{LOGDIR});
1263                 if (not defined($ENV{SMBD_DONT_LOG_STDOUT})) {
1264                         push(@args, "--log-stdout");
1265                 }
1266
1267                 close($env_vars->{STDIN_PIPE});
1268                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1269
1270                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1271                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1272         }
1273         $env_vars->{SMBD_TL_PID} = $pid;
1274         write_pid($env_vars, "smbd", $pid);
1275         print "DONE\n";
1276
1277         close(STDIN_READER);
1278
1279         return $self->wait_for_start($env_vars, $nmbd, $winbindd, $smbd);
1280 }
1281
1282 sub createuser($$$$)
1283 {
1284         my ($self, $username, $password, $conffile) = @_;
1285         my $cmd = "UID_WRAPPER_ROOT=1 " . Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $username > /dev/null";
1286         unless (open(PWD, "|$cmd")) {
1287             warn("Unable to set password for $username account\n$cmd");
1288             return undef;
1289         }
1290         print PWD "$password\n$password\n";
1291         unless (close(PWD)) {
1292             warn("Unable to set password for $username account\n$cmd");
1293             return undef;
1294         }
1295 }
1296
1297 sub provision($$$$$$$$$)
1298 {
1299         my ($self, $prefix, $domain, $server, $password, $extra_options, $dc_server_ip, $dc_server_ipv6, $no_delete_prefix) = @_;
1300
1301         ##
1302         ## setup the various environment variables we need
1303         ##
1304
1305         my $swiface = Samba::get_interface($server);
1306         my %ret = ();
1307         my $server_ip = "127.0.0.$swiface";
1308         my $server_ipv6 = sprintf("fd00:0000:0000:0000:0000:0000:5357:5f%02x", $swiface);
1309
1310         my $unix_name = ($ENV{USER} or $ENV{LOGNAME} or `PATH=/usr/ucb:$ENV{PATH} whoami`);
1311         chomp $unix_name;
1312         my $unix_uid = $>;
1313         my $unix_gids_str = $);
1314         my @unix_gids = split(" ", $unix_gids_str);
1315
1316         my $prefix_abs = abs_path($prefix);
1317         my $bindir_abs = abs_path($self->{bindir});
1318
1319         my @dirs = ();
1320
1321         my $shrdir="$prefix_abs/share";
1322         push(@dirs,$shrdir);
1323
1324         my $libdir="$prefix_abs/lib";
1325         push(@dirs,$libdir);
1326
1327         my $piddir="$prefix_abs/pid";
1328         push(@dirs,$piddir);
1329
1330         my $privatedir="$prefix_abs/private";
1331         push(@dirs,$privatedir);
1332
1333         my $lockdir="$prefix_abs/lockdir";
1334         push(@dirs,$lockdir);
1335
1336         my $eventlogdir="$prefix_abs/lockdir/eventlog";
1337         push(@dirs,$eventlogdir);
1338
1339         my $logdir="$prefix_abs/logs";
1340         push(@dirs,$logdir);
1341
1342         my $driver32dir="$shrdir/W32X86";
1343         push(@dirs,$driver32dir);
1344
1345         my $driver64dir="$shrdir/x64";
1346         push(@dirs,$driver64dir);
1347
1348         my $driver40dir="$shrdir/WIN40";
1349         push(@dirs,$driver40dir);
1350
1351         my $ro_shrdir="$shrdir/root-tmp";
1352         push(@dirs,$ro_shrdir);
1353
1354         my $msdfs_shrdir="$shrdir/msdfsshare";
1355         push(@dirs,$msdfs_shrdir);
1356
1357         my $msdfs_deeppath="$msdfs_shrdir/deeppath";
1358         push(@dirs,$msdfs_deeppath);
1359
1360         my $badnames_shrdir="$shrdir/badnames";
1361         push(@dirs,$badnames_shrdir);
1362
1363         my $lease1_shrdir="$shrdir/SMB2_10";
1364         push(@dirs,$lease1_shrdir);
1365
1366         my $lease2_shrdir="$shrdir/SMB3_00";
1367         push(@dirs,$lease2_shrdir);
1368
1369         my $manglenames_shrdir="$shrdir/manglenames";
1370         push(@dirs,$manglenames_shrdir);
1371
1372         my $widelinks_shrdir="$shrdir/widelinks";
1373         push(@dirs,$widelinks_shrdir);
1374
1375         my $widelinks_linkdir="$shrdir/widelinks_foo";
1376         push(@dirs,$widelinks_linkdir);
1377
1378         my $shadow_tstdir="$shrdir/shadow";
1379         push(@dirs,$shadow_tstdir);
1380         my $shadow_mntdir="$shadow_tstdir/mount";
1381         push(@dirs,$shadow_mntdir);
1382         my $shadow_basedir="$shadow_mntdir/base";
1383         push(@dirs,$shadow_basedir);
1384         my $shadow_shrdir="$shadow_basedir/share";
1385         push(@dirs,$shadow_shrdir);
1386
1387         my $nosymlinks_shrdir="$shrdir/nosymlinks";
1388         push(@dirs,$nosymlinks_shrdir);
1389
1390         my $local_symlinks_shrdir="$shrdir/local_symlinks";
1391         push(@dirs,$local_symlinks_shrdir);
1392
1393         # this gets autocreated by winbindd
1394         my $wbsockdir="$prefix_abs/winbindd";
1395
1396         my $nmbdsockdir="$prefix_abs/nmbd";
1397         unlink($nmbdsockdir);
1398
1399         ##
1400         ## create the test directory layout
1401         ##
1402         die ("prefix_abs = ''") if $prefix_abs eq "";
1403         die ("prefix_abs = '/'") if $prefix_abs eq "/";
1404
1405         mkdir($prefix_abs, 0777);
1406         print "CREATE TEST ENVIRONMENT IN '$prefix'...";
1407         if (not defined($no_delete_prefix) or not $no_delete_prefix) {
1408             system("rm -rf $prefix_abs/*");
1409         }
1410         mkdir($_, 0777) foreach(@dirs);
1411
1412         my $fs_specific_conf = $self->get_fs_specific_conf($shrdir);
1413
1414         ##
1415         ## lockdir and piddir must be 0755
1416         ##
1417         chmod 0755, $lockdir;
1418         chmod 0755, $piddir;
1419
1420
1421         ##
1422         ## create ro and msdfs share layout
1423         ##
1424
1425         chmod 0755, $ro_shrdir;
1426         my $unreadable_file = "$ro_shrdir/unreadable_file";
1427         unless (open(UNREADABLE_FILE, ">$unreadable_file")) {
1428                 warn("Unable to open $unreadable_file");
1429                 return undef;
1430         }
1431         close(UNREADABLE_FILE);
1432         chmod 0600, $unreadable_file;
1433
1434         my $msdfs_target = "$ro_shrdir/msdfs-target";
1435         unless (open(MSDFS_TARGET, ">$msdfs_target")) {
1436                 warn("Unable to open $msdfs_target");
1437                 return undef;
1438         }
1439         close(MSDFS_TARGET);
1440         chmod 0666, $msdfs_target;
1441         symlink "msdfs:$server_ip\\ro-tmp,$server_ipv6\\ro-tmp",
1442                 "$msdfs_shrdir/msdfs-src1";
1443         symlink "msdfs:$server_ipv6\\ro-tmp", "$msdfs_shrdir/deeppath/msdfs-src2";
1444
1445         ##
1446         ## create bad names in $badnames_shrdir
1447         ##
1448         ## (An invalid name, would be mangled to 8.3).
1449         my $badname_target = "$badnames_shrdir/\340|\231\216\377\177";
1450         unless (open(BADNAME_TARGET, ">$badname_target")) {
1451                 warn("Unable to open $badname_target");
1452                 return undef;
1453         }
1454         close(BADNAME_TARGET);
1455         chmod 0666, $badname_target;
1456
1457         ## (A bad name, would not be mangled to 8.3).
1458         my $badname_target = "$badnames_shrdir/\240\276\346\327\377\177";
1459         unless (open(BADNAME_TARGET, ">$badname_target")) {
1460                 warn("Unable to open $badname_target");
1461                 return undef;
1462         }
1463         close(BADNAME_TARGET);
1464         chmod 0666, $badname_target;
1465
1466         ## (A bad good name).
1467         my $badname_target = "$badnames_shrdir/blank.txt";
1468         unless (open(BADNAME_TARGET, ">$badname_target")) {
1469                 warn("Unable to open $badname_target");
1470                 return undef;
1471         }
1472         close(BADNAME_TARGET);
1473         chmod 0666, $badname_target;
1474
1475         ##
1476         ## create mangleable directory names in $manglenames_shrdir
1477         ##
1478         my $manglename_target = "$manglenames_shrdir/foo:bar";
1479         mkdir($manglename_target, 0777);
1480
1481         ##
1482         ## create symlinks for widelinks tests.
1483         ##
1484         my $widelinks_target = "$widelinks_linkdir/target";
1485         unless (open(WIDELINKS_TARGET, ">$widelinks_target")) {
1486                 warn("Unable to open $widelinks_target");
1487                 return undef;
1488         }
1489         close(WIDELINKS_TARGET);
1490         chmod 0666, $widelinks_target;
1491         ##
1492         ## This link should get ACCESS_DENIED
1493         ##
1494         symlink "$widelinks_target", "$widelinks_shrdir/source";
1495         ##
1496         ## This link should be allowed
1497         ##
1498         symlink "$widelinks_shrdir", "$widelinks_shrdir/dot";
1499
1500         my $conffile="$libdir/server.conf";
1501         my $dfqconffile="$libdir/dfq.conf";
1502
1503         my $nss_wrapper_pl = "$ENV{PERL} $self->{srcdir}/lib/nss_wrapper/nss_wrapper.pl";
1504         my $nss_wrapper_passwd = "$privatedir/passwd";
1505         my $nss_wrapper_group = "$privatedir/group";
1506         my $nss_wrapper_hosts = "$ENV{SELFTEST_PREFIX}/hosts";
1507         my $resolv_conf = "$privatedir/resolv.conf";
1508         my $dns_host_file = "$ENV{SELFTEST_PREFIX}/dns_host_file";
1509
1510         my $mod_printer_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/printing/modprinter.pl";
1511
1512         my $fake_snap_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/fake_snap.pl";
1513
1514         my @eventlog_list = ("dns server", "application");
1515
1516         ##
1517         ## calculate uids and gids
1518         ##
1519
1520         my ($max_uid, $max_gid);
1521         my ($uid_nobody, $uid_root, $uid_pdbtest, $uid_pdbtest2, $uid_userdup);
1522         my ($uid_pdbtest_wkn);
1523         my ($uid_smbget);
1524         my ($uid_force_user);
1525         my ($gid_nobody, $gid_nogroup, $gid_root, $gid_domusers, $gid_domadmins);
1526         my ($gid_userdup, $gid_everyone);
1527         my ($gid_force_user);
1528         my ($uid_user1);
1529         my ($uid_user2);
1530
1531         if ($unix_uid < 0xffff - 10) {
1532                 $max_uid = 0xffff;
1533         } else {
1534                 $max_uid = $unix_uid;
1535         }
1536
1537         $uid_root = $max_uid - 1;
1538         $uid_nobody = $max_uid - 2;
1539         $uid_pdbtest = $max_uid - 3;
1540         $uid_pdbtest2 = $max_uid - 4;
1541         $uid_userdup = $max_uid - 5;
1542         $uid_pdbtest_wkn = $max_uid - 6;
1543         $uid_force_user = $max_uid - 7;
1544         $uid_smbget = $max_uid - 8;
1545         $uid_user1 = $max_uid - 9;
1546         $uid_user2 = $max_uid - 10;
1547
1548         if ($unix_gids[0] < 0xffff - 8) {
1549                 $max_gid = 0xffff;
1550         } else {
1551                 $max_gid = $unix_gids[0];
1552         }
1553
1554         $gid_nobody = $max_gid - 1;
1555         $gid_nogroup = $max_gid - 2;
1556         $gid_root = $max_gid - 3;
1557         $gid_domusers = $max_gid - 4;
1558         $gid_domadmins = $max_gid - 5;
1559         $gid_userdup = $max_gid - 6;
1560         $gid_everyone = $max_gid - 7;
1561         $gid_force_user = $max_gid - 8;
1562
1563         ##
1564         ## create conffile
1565         ##
1566
1567         unless (open(CONF, ">$conffile")) {
1568                 warn("Unable to open $conffile");
1569                 return undef;
1570         }
1571         print CONF "
1572 [global]
1573         netbios name = $server
1574         interfaces = $server_ip/8 $server_ipv6/64
1575         bind interfaces only = yes
1576         panic action = cd $self->{srcdir} && $self->{srcdir}/selftest/gdb_backtrace %d %\$(MAKE_TEST_BINARY)
1577         smbd:suicide mode = yes
1578
1579         workgroup = $domain
1580
1581         private dir = $privatedir
1582         pid directory = $piddir
1583         lock directory = $lockdir
1584         log file = $logdir/log.\%m
1585         log level = 1
1586         debug pid = yes
1587         max log size = 0
1588
1589         state directory = $lockdir
1590         cache directory = $lockdir
1591
1592         passdb backend = tdbsam
1593
1594         time server = yes
1595
1596         add user script =               $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1597         add group script =              $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action add --name %g
1598         add machine script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1599         add user to group script =      $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action add --member %u --name %g --group_path $nss_wrapper_group
1600         delete user script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action delete --name %u
1601         delete group script =           $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action delete --name %g
1602         delete user from group script = $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action delete --member %u --name %g --group_path $nss_wrapper_group
1603
1604         addprinter command =            $mod_printer_pl -a -s $conffile --
1605         deleteprinter command =         $mod_printer_pl -d -s $conffile --
1606
1607         eventlog list = application \"dns server\"
1608
1609         kernel oplocks = no
1610         kernel change notify = no
1611
1612         logging = file
1613         printing = bsd
1614         printcap name = /dev/null
1615
1616         winbindd socket directory = $wbsockdir
1617         nmbd:socket dir = $nmbdsockdir
1618         idmap config * : range = 100000-200000
1619         winbind enum users = yes
1620         winbind enum groups = yes
1621         winbind separator = /
1622         include system krb5 conf = no
1623
1624 #       min receivefile size = 4000
1625
1626         read only = no
1627
1628         smbd:sharedelay = 100000
1629         smbd:writetimeupdatedelay = 500000
1630         map hidden = no
1631         map system = no
1632         map readonly = no
1633         store dos attributes = yes
1634         create mask = 755
1635         dos filemode = yes
1636         strict rename = yes
1637         strict sync = yes
1638         vfs objects = acl_xattr fake_acls xattr_tdb streams_depot
1639
1640         printing = vlp
1641         print command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb print %p %s
1642         lpq command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpq %p
1643         lp rm command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lprm %p %j
1644         lp pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lppause %p %j
1645         lp resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpresume %p %j
1646         queue pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queuepause %p
1647         queue resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queueresume %p
1648         lpq cache time = 0
1649         print notify backchannel = yes
1650
1651         ncalrpc dir = $prefix_abs/ncalrpc
1652
1653         # The samba3.blackbox.smbclient_s3 test uses this to test that
1654         # sending messages works, and that the %m sub works.
1655         message command = mv %s $shrdir/message.%m
1656
1657         # fsrvp server requires registry shares
1658         registry shares = yes
1659
1660         # Used by RPC SRVSVC tests
1661         add share command = $bindir_abs/smbaddshare
1662         change share command = $bindir_abs/smbchangeshare
1663         delete share command = $bindir_abs/smbdeleteshare
1664
1665         # fruit:copyfile is a global option
1666         fruit:copyfile = yes
1667
1668         #this does not mean that we use non-secure test env,
1669         #it just means we ALLOW one to be configured.
1670         allow insecure wide links = yes
1671
1672         # Begin extra options
1673         $extra_options
1674         # End extra options
1675
1676         #Include user defined custom parameters if set
1677 ";
1678
1679         if (defined($ENV{INCLUDE_CUSTOM_CONF})) {
1680                 print CONF "\t$ENV{INCLUDE_CUSTOM_CONF}\n";
1681         }
1682
1683         print CONF "
1684 [tmp]
1685         path = $shrdir
1686         comment = smb username is [%U]
1687 [tmpsort]
1688         path = $shrdir
1689         comment = Load dirsort module
1690         vfs objects = dirsort acl_xattr fake_acls xattr_tdb streams_depot
1691 [tmpenc]
1692         path = $shrdir
1693         comment = encrypt smb username is [%U]
1694         smb encrypt = required
1695         vfs objects = dirsort
1696 [tmpguest]
1697         path = $shrdir
1698         guest ok = yes
1699 [guestonly]
1700         path = $shrdir
1701         guest only = yes
1702         guest ok = yes
1703 [forceuser]
1704         path = $shrdir
1705         force user = $unix_name
1706         guest ok = yes
1707 [forceuser_unixonly]
1708         comment = force a user with unix user SID and group SID
1709         path = $shrdir
1710         force user = pdbtest
1711         guest ok = yes
1712 [forceuser_wkngroup]
1713         comment = force a user with well-known group SID
1714         path = $shrdir
1715         force user = pdbtest_wkn
1716         guest ok = yes
1717 [forcegroup]
1718         path = $shrdir
1719         force group = nogroup
1720         guest ok = yes
1721 [ro-tmp]
1722         path = $ro_shrdir
1723         guest ok = yes
1724 [write-list-tmp]
1725         path = $shrdir
1726         read only = yes
1727         write list = $unix_name
1728 [valid-users-tmp]
1729         path = $shrdir
1730         valid users = $unix_name
1731         access based share enum = yes
1732 [msdfs-share]
1733         path = $msdfs_shrdir
1734         msdfs root = yes
1735         msdfs shuffle referrals = yes
1736         guest ok = yes
1737 [hideunread]
1738         copy = tmp
1739         hide unreadable = yes
1740 [tmpcase]
1741         copy = tmp
1742         case sensitive = yes
1743 [hideunwrite]
1744         copy = tmp
1745         hide unwriteable files = yes
1746 [durable]
1747         copy = tmp
1748         kernel share modes = no
1749         kernel oplocks = no
1750         posix locking = no
1751 [fs_specific]
1752         copy = tmp
1753         $fs_specific_conf
1754 [print1]
1755         copy = tmp
1756         printable = yes
1757
1758 [print2]
1759         copy = print1
1760 [print3]
1761         copy = print1
1762         default devmode = no
1763 [lp]
1764         copy = print1
1765
1766 [nfs4acl_simple]
1767         path = $shrdir
1768         comment = smb username is [%U]
1769         nfs4:mode = simple
1770         vfs objects = nfs4acl_xattr xattr_tdb
1771
1772 [nfs4acl_special]
1773         path = $shrdir
1774         comment = smb username is [%U]
1775         nfs4:mode = special
1776         vfs objects = nfs4acl_xattr xattr_tdb
1777
1778 [xcopy_share]
1779         path = $shrdir
1780         comment = smb username is [%U]
1781         create mask = 777
1782         force create mode = 777
1783 [posix_share]
1784         path = $shrdir
1785         comment = smb username is [%U]
1786         create mask = 0777
1787         force create mode = 0
1788         directory mask = 0777
1789         force directory mode = 0
1790         vfs objects = xattr_tdb streams_depot
1791 [aio]
1792         copy = tmp
1793         aio read size = 1
1794         aio write size = 1
1795
1796 [print\$]
1797         copy = tmp
1798
1799 [vfs_fruit]
1800         path = $shrdir
1801         vfs objects = catia fruit streams_xattr acl_xattr
1802         fruit:resource = file
1803         fruit:metadata = netatalk
1804         fruit:locking = netatalk
1805         fruit:encoding = native
1806
1807 [vfs_fruit_metadata_stream]
1808         path = $shrdir
1809         vfs objects = fruit streams_xattr acl_xattr
1810         fruit:resource = file
1811         fruit:metadata = stream
1812
1813 [vfs_fruit_stream_depot]
1814         path = $shrdir
1815         vfs objects = fruit streams_depot acl_xattr
1816         fruit:resource = stream
1817         fruit:metadata = stream
1818
1819 [vfs_wo_fruit]
1820         path = $shrdir
1821         vfs objects = streams_xattr acl_xattr
1822
1823 [vfs_wo_fruit_stream_depot]
1824         path = $shrdir
1825         vfs objects = streams_depot acl_xattr
1826
1827 [badname-tmp]
1828         path = $badnames_shrdir
1829         guest ok = yes
1830
1831 [manglenames_share]
1832         path = $manglenames_shrdir
1833         guest ok = yes
1834
1835 [dynamic_share]
1836         path = $shrdir/%R
1837         guest ok = yes
1838
1839 [widelinks_share]
1840         path = $widelinks_shrdir
1841         wide links = no
1842         guest ok = yes
1843
1844 [fsrvp_share]
1845         path = $shrdir
1846         comment = fake shapshots using rsync
1847         vfs objects = shell_snap shadow_copy2
1848         shell_snap:check path command = $fake_snap_pl --check
1849         shell_snap:create command = $fake_snap_pl --create
1850         shell_snap:delete command = $fake_snap_pl --delete
1851         # a relative path here fails, the snapshot dir is no longer found
1852         shadow:snapdir = $shrdir/.snapshots
1853
1854 [shadow1]
1855         path = $shadow_shrdir
1856         comment = previous versions snapshots under mount point
1857         vfs objects = shadow_copy2
1858         shadow:mountpoint = $shadow_mntdir
1859
1860 [shadow2]
1861         path = $shadow_shrdir
1862         comment = previous versions snapshots outside mount point
1863         vfs objects = shadow_copy2
1864         shadow:mountpoint = $shadow_mntdir
1865         shadow:snapdir = $shadow_tstdir/.snapshots
1866
1867 [shadow3]
1868         path = $shadow_shrdir
1869         comment = previous versions with subvolume snapshots, snapshots under base dir
1870         vfs objects = shadow_copy2
1871         shadow:mountpoint = $shadow_mntdir
1872         shadow:basedir = $shadow_basedir
1873         shadow:snapdir = $shadow_basedir/.snapshots
1874
1875 [shadow4]
1876         path = $shadow_shrdir
1877         comment = previous versions with subvolume snapshots, snapshots outside mount point
1878         vfs objects = shadow_copy2
1879         shadow:mountpoint = $shadow_mntdir
1880         shadow:basedir = $shadow_basedir
1881         shadow:snapdir = $shadow_tstdir/.snapshots
1882
1883 [shadow5]
1884         path = $shadow_shrdir
1885         comment = previous versions at volume root snapshots under mount point
1886         vfs objects = shadow_copy2
1887         shadow:mountpoint = $shadow_shrdir
1888
1889 [shadow6]
1890         path = $shadow_shrdir
1891         comment = previous versions at volume root snapshots outside mount point
1892         vfs objects = shadow_copy2
1893         shadow:mountpoint = $shadow_shrdir
1894         shadow:snapdir = $shadow_tstdir/.snapshots
1895
1896 [shadow7]
1897         path = $shadow_shrdir
1898         comment = previous versions snapshots everywhere
1899         vfs objects = shadow_copy2
1900         shadow:mountpoint = $shadow_mntdir
1901         shadow:snapdirseverywhere = yes
1902
1903 [shadow8]
1904         path = $shadow_shrdir
1905         comment = previous versions using snapsharepath
1906         vfs objects = shadow_copy2
1907         shadow:mountpoint = $shadow_mntdir
1908         shadow:snapdir = $shadow_tstdir/.snapshots
1909         shadow:snapsharepath = share
1910
1911 [shadow_fmt0]
1912         comment = Testing shadow:format with default option
1913         vfs object = shadow_copy2
1914         path = $shadow_shrdir
1915         read only = no
1916         guest ok = yes
1917         shadow:mountpoint = $shadow_mntdir
1918         shadow:basedir = $shadow_basedir
1919         shadow:snapdir = $shadow_basedir/.snapshots
1920         shadow:format = \@GMT-%Y.%m.%d-%H.%M.%S
1921
1922 [shadow_fmt1]
1923         comment = Testing shadow:format with only date component
1924         vfs object = shadow_copy2
1925         path = $shadow_shrdir
1926         read only = no
1927         guest ok = yes
1928         shadow:mountpoint = $shadow_mntdir
1929         shadow:basedir = $shadow_basedir
1930         shadow:snapdir = $shadow_basedir/.snapshots
1931         shadow:format = \@GMT-%Y-%m-%d
1932
1933 [shadow_fmt2]
1934         comment = Testing shadow:format with some hardcoded prefix
1935         vfs object = shadow_copy2
1936         path = $shadow_shrdir
1937         read only = no
1938         guest ok = yes
1939         shadow:mountpoint = $shadow_mntdir
1940         shadow:basedir = $shadow_basedir
1941         shadow:snapdir = $shadow_basedir/.snapshots
1942         shadow:format = snap\@GMT-%Y.%m.%d-%H.%M.%S
1943
1944 [shadow_fmt3]
1945         comment = Testing shadow:format with modified format
1946         vfs object = shadow_copy2
1947         path = $shadow_shrdir
1948         read only = no
1949         guest ok = yes
1950         shadow:mountpoint = $shadow_mntdir
1951         shadow:basedir = $shadow_basedir
1952         shadow:snapdir = $shadow_basedir/.snapshots
1953         shadow:format = \@GMT-%Y.%m.%d-%H_%M_%S-snap
1954
1955 [shadow_fmt4]
1956         comment = Testing shadow:snapprefix regex
1957         vfs object = shadow_copy2
1958         path = $shadow_shrdir
1959         read only = no
1960         guest ok = yes
1961         shadow:mountpoint = $shadow_mntdir
1962         shadow:basedir = $shadow_basedir
1963         shadow:snapdir = $shadow_basedir/.snapshots
1964         shadow:snapprefix = \^s[a-z]*p\$
1965         shadow:format = _GMT-%Y.%m.%d-%H.%M.%S
1966
1967 [shadow_fmt5]
1968         comment = Testing shadow:snapprefix with delim regex
1969         vfs object = shadow_copy2
1970         path = $shadow_shrdir
1971         read only = no
1972         guest ok = yes
1973         shadow:mountpoint = $shadow_mntdir
1974         shadow:basedir = $shadow_basedir
1975         shadow:snapdir = $shadow_basedir/.snapshots
1976         shadow:delimiter = \@GMT
1977         shadow:snapprefix = [a-z]*
1978         shadow:format = \@GMT-%Y.%m.%d-%H.%M.%S
1979
1980 [shadow_wl]
1981         path = $shadow_shrdir
1982         comment = previous versions with wide links allowed
1983         vfs objects = shadow_copy2
1984         shadow:mountpoint = $shadow_mntdir
1985         wide links = yes
1986 [dfq]
1987         path = $shrdir/dfree
1988         vfs objects = acl_xattr fake_acls xattr_tdb fake_dfq
1989         admin users = $unix_name
1990         include = $dfqconffile
1991 [dfq_owner]
1992         path = $shrdir/dfree
1993         vfs objects = acl_xattr fake_acls xattr_tdb fake_dfq
1994         inherit owner = yes
1995         include = $dfqconffile
1996 [acl_xattr_ign_sysacl_posix]
1997         copy = tmp
1998         acl_xattr:ignore system acls = yes
1999         acl_xattr:default acl style = posix
2000 [acl_xattr_ign_sysacl_windows]
2001         copy = tmp
2002         acl_xattr:ignore system acls = yes
2003         acl_xattr:default acl style = windows
2004
2005 [mangle_illegal]
2006         copy = tmp
2007         mangled names = illegal
2008
2009 [nosymlinks]
2010         copy = tmp
2011         path = $nosymlinks_shrdir
2012         follow symlinks = no
2013
2014 [local_symlinks]
2015         copy = tmp
2016         path = $local_symlinks_shrdir
2017         follow symlinks = yes
2018
2019 [kernel_oplocks]
2020         copy = tmp
2021         kernel oplocks = yes
2022         vfs objects = streams_xattr xattr_tdb
2023
2024 [compound_find]
2025         copy = tmp
2026         smbd:find async delay usec = 10000
2027         ";
2028         close(CONF);
2029
2030         unless (open(DFQCONF, ">$dfqconffile")) {
2031                 warn("Unable to open $dfqconffile");
2032                 return undef;
2033         }
2034         close(DFQCONF);
2035
2036         ##
2037         ## create a test account
2038         ##
2039
2040         unless (open(PASSWD, ">$nss_wrapper_passwd")) {
2041            warn("Unable to open $nss_wrapper_passwd");
2042            return undef;
2043         }
2044         print PASSWD "nobody:x:$uid_nobody:$gid_nobody:nobody gecos:$prefix_abs:/bin/false
2045 $unix_name:x:$unix_uid:$unix_gids[0]:$unix_name gecos:$prefix_abs:/bin/false
2046 pdbtest:x:$uid_pdbtest:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
2047 pdbtest2:x:$uid_pdbtest2:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
2048 userdup:x:$uid_userdup:$gid_userdup:userdup gecos:$prefix_abs:/bin/false
2049 pdbtest_wkn:x:$uid_pdbtest_wkn:$gid_everyone:pdbtest_wkn gecos:$prefix_abs:/bin/false
2050 force_user:x:$uid_force_user:$gid_force_user:force user gecos:$prefix_abs:/bin/false
2051 smbget_user:x:$uid_smbget:$gid_domusers:smbget_user gecos:$prefix_abs:/bin/false
2052 user1:x:$uid_user1:$gid_nogroup:user1 gecos:$prefix_abs:/bin/false
2053 user2:x:$uid_user2:$gid_nogroup:user2 gecos:$prefix_abs:/bin/false
2054 ";
2055         if ($unix_uid != 0) {
2056                 print PASSWD "root:x:$uid_root:$gid_root:root gecos:$prefix_abs:/bin/false
2057 ";
2058         }
2059         close(PASSWD);
2060
2061         unless (open(GROUP, ">$nss_wrapper_group")) {
2062              warn("Unable to open $nss_wrapper_group");
2063              return undef;
2064         }
2065         print GROUP "nobody:x:$gid_nobody:
2066 nogroup:x:$gid_nogroup:nobody
2067 $unix_name-group:x:$unix_gids[0]:
2068 domusers:X:$gid_domusers:
2069 domadmins:X:$gid_domadmins:
2070 userdup:x:$gid_userdup:$unix_name
2071 everyone:x:$gid_everyone:
2072 force_user:x:$gid_force_user:
2073 ";
2074         if ($unix_gids[0] != 0) {
2075                 print GROUP "root:x:$gid_root:
2076 ";
2077         }
2078
2079         close(GROUP);
2080
2081         ## hosts
2082         my $hostname = lc($server);
2083         unless (open(HOSTS, ">>$nss_wrapper_hosts")) {
2084                 warn("Unable to open $nss_wrapper_hosts");
2085                 return undef;
2086         }
2087         print HOSTS "${server_ip} ${hostname}.samba.example.com ${hostname}\n";
2088         print HOSTS "${server_ipv6} ${hostname}.samba.example.com ${hostname}\n";
2089         close(HOSTS);
2090
2091         ## hosts
2092         unless (open(RESOLV_CONF, ">$resolv_conf")) {
2093                 warn("Unable to open $resolv_conf");
2094                 return undef;
2095         }
2096         if (defined($dc_server_ip) or defined($dc_server_ipv6)) {
2097                 if (defined($dc_server_ip)) {
2098                         print RESOLV_CONF "nameserver $dc_server_ip\n";
2099                 }
2100                 if (defined($dc_server_ipv6)) {
2101                         print RESOLV_CONF "nameserver $dc_server_ipv6\n";
2102                 }
2103         } else {
2104                 print RESOLV_CONF "nameserver ${server_ip}\n";
2105                 print RESOLV_CONF "nameserver ${server_ipv6}\n";
2106         }
2107         close(RESOLV_CONF);
2108
2109         foreach my $evlog (@eventlog_list) {
2110                 my $evlogtdb = "$eventlogdir/$evlog.tdb";
2111                 open(EVENTLOG, ">$evlogtdb") or die("Unable to open $evlogtdb");
2112                 close(EVENTLOG);
2113         }
2114
2115         $ENV{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
2116         $ENV{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
2117         $ENV{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
2118         $ENV{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
2119         if ($ENV{SAMBA_DNS_FAKING}) {
2120                 $ENV{RESOLV_WRAPPER_CONF} = $resolv_conf;
2121         } else {
2122                 $ENV{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
2123         }
2124
2125         createuser($self, $unix_name, $password, $conffile) || die("Unable to create user");
2126         createuser($self, "force_user", $password, $conffile) || die("Unable to create force_user");
2127         createuser($self, "smbget_user", $password, $conffile) || die("Unable to create smbget_user");
2128         createuser($self, "user1", $password, $conffile) || die("Unable to create user1");
2129         createuser($self, "user2", $password, $conffile) || die("Unable to create user2");
2130
2131         open(DNS_UPDATE_LIST, ">$prefix/dns_update_list") or die("Unable to open $$prefix/dns_update_list");
2132         print DNS_UPDATE_LIST "A $server. $server_ip\n";
2133         print DNS_UPDATE_LIST "AAAA $server. $server_ipv6\n";
2134         close(DNS_UPDATE_LIST);
2135
2136         print "DONE\n";
2137
2138         $ret{SERVER_IP} = $server_ip;
2139         $ret{SERVER_IPV6} = $server_ipv6;
2140         $ret{NMBD_TEST_LOG} = "$prefix/nmbd_test.log";
2141         $ret{NMBD_TEST_LOG_POS} = 0;
2142         $ret{WINBINDD_TEST_LOG} = "$prefix/winbindd_test.log";
2143         $ret{WINBINDD_TEST_LOG_POS} = 0;
2144         $ret{SMBD_TEST_LOG} = "$prefix/smbd_test.log";
2145         $ret{SMBD_TEST_LOG_POS} = 0;
2146         $ret{SERVERCONFFILE} = $conffile;
2147         $ret{CONFIGURATION} ="-s $conffile";
2148         $ret{LOCK_DIR} = $lockdir;
2149         $ret{SERVER} = $server;
2150         $ret{USERNAME} = $unix_name;
2151         $ret{USERID} = $unix_uid;
2152         $ret{DOMAIN} = $domain;
2153         $ret{NETBIOSNAME} = $server;
2154         $ret{PASSWORD} = $password;
2155         $ret{PIDDIR} = $piddir;
2156         $ret{SELFTEST_WINBINDD_SOCKET_DIR} = $wbsockdir;
2157         $ret{NMBD_SOCKET_DIR} = $nmbdsockdir;
2158         $ret{SOCKET_WRAPPER_DEFAULT_IFACE} = $swiface;
2159         $ret{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
2160         $ret{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
2161         $ret{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
2162         $ret{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
2163         $ret{NSS_WRAPPER_MODULE_SO_PATH} = Samba::nss_wrapper_winbind_so_path($self);
2164         $ret{NSS_WRAPPER_MODULE_FN_PREFIX} = "winbind";
2165         if ($ENV{SAMBA_DNS_FAKING}) {
2166                 $ret{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
2167         } else {
2168                 $ret{RESOLV_WRAPPER_CONF} = $resolv_conf;
2169         }
2170         $ret{LOCAL_PATH} = "$shrdir";
2171         $ret{LOGDIR} = $logdir;
2172
2173         #
2174         # Avoid hitting system krb5.conf -
2175         # An env that needs Kerberos will reset this to the real
2176         # value.
2177         #
2178         $ret{KRB5_CONFIG} = abs_path($prefix) . "/no_krb5.conf";
2179
2180         # Define KRB5CCNAME for each environment we set up
2181         $ret{KRB5_CCACHE} = abs_path($prefix) . "/krb5ccache";
2182         $ENV{KRB5CCNAME} = $ret{KRB5_CCACHE};
2183
2184         return \%ret;
2185 }
2186
2187 sub wait_for_start($$$$$)
2188 {
2189         my ($self, $envvars, $nmbd, $winbindd, $smbd) = @_;
2190         my $ret;
2191
2192         if ($nmbd eq "yes") {
2193                 my $count = 0;
2194
2195                 # give time for nbt server to register its names
2196                 print "checking for nmbd\n";
2197
2198                 # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
2199                 my $nmblookup = Samba::bindir_path($self, "nmblookup");
2200
2201                 do {
2202                         $ret = system("$nmblookup $envvars->{CONFIGURATION} $envvars->{SERVER}");
2203                         if ($ret != 0) {
2204                                 sleep(1);
2205                         } else {
2206                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
2207                                 system("$nmblookup $envvars->{CONFIGURATION} __SAMBA__");
2208                                 system("$nmblookup $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
2209                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
2210                         }
2211                         $count++;
2212                 } while ($ret != 0 && $count < 10);
2213                 if ($count == 10) {
2214                         print "NMBD not reachable after 10 retries\n";
2215                         teardown_env($self, $envvars);
2216                         return 0;
2217                 }
2218         }
2219
2220         if ($winbindd eq "yes") {
2221             print "checking for winbindd\n";
2222             my $count = 0;
2223             do {
2224                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --ping-dc");
2225                 if ($ret != 0) {
2226                     sleep(1);
2227                 }
2228                 $count++;
2229             } while ($ret != 0 && $count < 20);
2230             if ($count == 20) {
2231                 print "WINBINDD not reachable after 20 seconds\n";
2232                 teardown_env($self, $envvars);
2233                 return 0;
2234             }
2235         }
2236
2237         if ($smbd eq "yes") {
2238             # make sure smbd is also up set
2239             print "wait for smbd\n";
2240
2241             my $count = 0;
2242             do {
2243                 $ret = system(Samba::bindir_path($self, "smbclient") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
2244                 if ($ret != 0) {
2245                     sleep(1);
2246                 }
2247                 $count++
2248             } while ($ret != 0 && $count < 20);
2249             if ($count == 20) {
2250                 print "SMBD failed to start up in a reasonable time (20sec)\n";
2251                 teardown_env($self, $envvars);
2252                 return 0;
2253             }
2254         }
2255
2256         # Ensure we have domain users mapped.
2257         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=513 unixgroup=domusers type=domain");
2258         if ($ret != 0) {
2259             return 1;
2260         }
2261         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=512 unixgroup=domadmins type=domain");
2262         if ($ret != 0) {
2263             return 1;
2264         }
2265         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add sid=S-1-1-0 unixgroup=everyone type=builtin");
2266         if ($ret != 0) {
2267             return 1;
2268         }
2269
2270         if ($winbindd eq "yes") {
2271             # note: creating builtin groups requires winbindd for the
2272             # unix id allocator
2273             $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} sam createbuiltingroup Users");
2274             if ($ret != 0) {
2275                 print "Failed to create BUILTIN\\Users group\n";
2276                 return 0;
2277             }
2278             my $count = 0;
2279             do {
2280                 system(Samba::bindir_path($self, "net") . " $envvars->{CONFIGURATION} cache del IDMAP/SID2XID/S-1-5-32-545");
2281                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --sid-to-gid=S-1-5-32-545");
2282                 if ($ret != 0) {
2283                     sleep(2);
2284                 }
2285                 $count++;
2286             } while ($ret != 0 && $count < 10);
2287             if ($count == 10) {
2288                 print "WINBINDD not reachable after 20 seconds\n";
2289                 teardown_env($self, $envvars);
2290                 return 0;
2291             }
2292         }
2293
2294         print $self->getlog_env($envvars);
2295
2296         return 1;
2297 }
2298
2299 1;