s3:include: let CLI_BUFFER_SIZE be an alias of SMB_BUFFER_SIZE_MAX

[Samba.git] / docs-xml / Samba3-HOWTO / TOSHARG-ChangeNotes.xml

<?xml version="1.0" encoding="iso-8859-1"?>
<!DOCTYPE chapter PUBLIC "-//Samba-Team//DTD DocBook V4.2-Based Variant V1.0//EN" "http://www.samba.org/samba/DTD/samba-doc">
<chapter id="ChangeNotes">
<chapterinfo>
        &author.jht;
        &author.jerry;
</chapterinfo>

<title>Important and Critical Change Notes for the Samba 3.x Series</title>
<para>
Please read this chapter carefully before update or upgrading Samba.  You should expect to find only critical
or very important information here. Comprehensive change notes and guidance information can be found in the
section <link linkend="upgrading-to-3.0">Updating and Upgrading Samba</link>.
</para>

<sect1>

<title>Important Samba-3.2.x Change Notes</title>
<para>
!!!!!!!!!!!!Add all critical update notes here!!!!!!!!!!!!!
</para>

</sect1>

<sect1>

<title>Important Samba-3.0.x Change Notes</title>
<para>
These following notes pertain in particular to Samba 3.0.23 through Samba 3.0.25c (or more recent 3.0.25
update).  Samba is a fluid and ever changing project. Changes throughout the 3.0.x series release are
documented in this documention - See <link linkend="oldupdatenotes">Upgrading from Samba-2.x to Samba-3.0.25</link>.
</para>

<para>
Sometimes it is difficult to figure out which part, or parts, of the HOWTO documentation should be updated to
reflect the impact of new or modified features. At other times it becomes clear that the documentation is in
need of being restructured.
</para>

<para>
In recent times a group of Samba users has joined the thrust to create a new <ulink
url="http://wiki.samba.org/">Samba Wiki</ulink> that is slated to become the all-singing and all-dancing
new face of Samba documentation. Hopefully, the Wiki will benefit from greater community input and
thus may be kept more up to date. Until that golden dream materializes and matures it is necessary to
continue to maintain the HOWTO. This chapter will document major departures from earlier behavior until
such time as the body of this HOWTO is restructured or modified.
</para>

<para>
This chapter is new to the release of the HOWTO for Samba 3.0.23. It includes much of the notes provided
in the <filename>WHATSNEW.txt</filename> file that is included with the Samba source code release tarball.
</para>

<sect2>
<title>User and Group Changes</title>

<para>
The change documented here affects unmapped user and group accounts only.
</para>

<para>
<indexterm><primary>user</primary></indexterm>
<indexterm><primary>group</primary></indexterm>
<indexterm><primary>Relative Identifiers</primary><see>RID</see></indexterm>
<indexterm><primary>net</primary><secondary>groupmap</secondary></indexterm>
<indexterm><primary>net</primary><secondary>rpc</secondary><tertiary>vampire</tertiary></indexterm>
The user and group internal management routines have been rewritten to prevent overlaps of
assigned Relative Identifiers (RIDs).  In the past the has been a potential problem when
either manually mapping Unix groups with the <command>net groupmap</command> command or
when migrating a Windows domain to a Samba domain by executing:
<command>net rpc vampire</command>.
</para>

<para>
<indexterm><primary>SID</primary></indexterm>
<indexterm><primary>SAM</primary></indexterm>
<indexterm><primary>RID</primary></indexterm>
<indexterm><primary>net</primary><secondary>getlocalsid</secondary></indexterm>
Unmapped users are now assigned a SID in the <literal>S-1-22-1</literal> domain and unmapped
groups are assigned a SID in the <literal>S-1-22-2</literal> domain.  Previously they were
assigned a RID within the SAM on the Samba server.  For a domain controller this would have been under the
authority of the domain SID where as on a member server or standalone server, this would have
been under the authority of the local SAM (see the man page for <command>net getlocalsid</command>).
</para>

<para>
<indexterm><primary>unmapped users</primary></indexterm>
<indexterm><primary>unmapped groups</primary></indexterm>
<indexterm><primary>SID</primary></indexterm>
<indexterm><primary>NTFS</primary></indexterm>
<indexterm><primary>GID</primary></indexterm>
The result is that any unmapped users or groups on an upgraded Samba domain controller may
be assigned a new SID.  Because the SID rather than a name is stored in Windows security
descriptors, this can cause a user to no longer have access to a resource for example if a
file was copied from a Samba file server to a local Windows client NTFS partition.  Any files
stored on the Samba server itself will continue to be accessible because UNIX stores the UNIX
GID and not the SID for authorization checks.
</para>

<para>
An example helps to illustrate the change:
</para>

<para>
<indexterm><primary>group mapping</primary></indexterm>
<indexterm><primary>GID</primary></indexterm>
<indexterm><primary>ACL</primary></indexterm>
<indexterm><primary>SID</primary></indexterm>
Assume that a group named <emphasis>developers</emphasis> exists with a UNIX GID of 782. In this
case this group does not exist in Samba's group mapping table. It would be perfectly normal for
this group to be appear in an ACL editor.  Prior to Samba-3.0.23, the group SID might appear as
<literal>S-1-5-21-647511796-4126122067-3123570092-2565</literal>.
</para>

<para>
<indexterm><primary>SID</primary></indexterm>
<indexterm><primary>NTFS</primary></indexterm>
<indexterm><primary>access</primary></indexterm>
<indexterm><primary>group permissions</primary></indexterm>
With the release of Samba-3.0.23, the group SID would be reported as <literal>S-1-22-2-782</literal>.  Any
security descriptors associated with files stored on a Windows NTFS disk partition will not allow access based
on the group permissions if the user was not a member of the
<literal>S-1-5-21-647511796-4126122067-3123570092-2565</literal>  group.  Because this group SID is
<literal>S-1-22-2-782</literal> and not reported in a user's token, Windows would fail the authorization check
even though both SIDs in some respect refer to the same UNIX group.
</para>

<para>
<indexterm><primary>group mapping</primary></indexterm>
<indexterm><primary>SID</primary></indexterm>
The workaround for versions of Samba prior to 3.0.23, is to create a manual domain group mapping
entry for the group <emphasis>developers</emphasis> to point at the
<literal>S-1-5-21-647511796-4126122067-3123570092-2565</literal> SID. With the release of Samba-3.0.23 this
workaround is no longer needed.
</para>
</sect2>

<sect2>
<title>Essential Group Mappings</title>
<para>
Samba 3.0.x series  releases before 3.0.23 automatically created group mappings for the essential Windows
domain groups <literal>Domain Admins, Domain Users, Domain Guests</literal>. Commencing with Samba 3.0.23
these mappings need to be created by the Samba administrator. Failure to do this may result in a failure to
correctly authenticate and recoognize valid domain users. When this happens users will not be able to log onto
the Windows client.
</para>

<note><para>
Group mappings are essentail only if the Samba servers is running as a PDC/BDC. Stand-alone servers do not
require these group mappings.
</para></note>

<para>
The following mappings are required:
</para>

<table frame="all" id="TOSH-domgroups">
        <title>Essential Domain Group Mappings</title>
        <tgroup align="center" cols="3">
        <thead>
                <row><entry>Domain Group</entry><entry>RID</entry><entry>Example UNIX Group</entry></row>
        </thead>
        <tbody>
                <row><entry>Domain Admins</entry><entry>512</entry><entry>root</entry></row>
                <row><entry>Domain Users</entry><entry>513</entry><entry>users</entry></row>
                <row><entry>Domain Guests</entry><entry>514</entry><entry>nobody</entry></row>
        </tbody>
        </tgroup>
</table>

<para>
When the POSIX (UNIX) groups are stored in LDAP, it may be desirable to call these <literal>domadmins, domusers,
domguests</literal> respectively.
</para>

<para>
For further information regarding group mappings see <link linkend="groupmapping">Group Mapping: MS Windows
and UNIX</link>.
</para>

</sect2>

<sect2>
<title>Passdb Changes</title>

<para>
<indexterm><primary>backends</primary></indexterm>
<indexterm><primary>GID</primary></indexterm>
<indexterm><primary>SQL</primary></indexterm>
<indexterm><primary>XML</primary></indexterm>
The <smbconfoption name="passdb backend"/> parameter no longer accepts multiple passdb backends in a
chained configuration.  Also be aware that the SQL and XML based passdb modules have been
removed in the Samba-3.0.23 release.  More information regarding external support for a SQL
passdb module can be found on the  <ulink url="http://pdbsql.sourceforge.net/">pdbsql</ulink> web site.
</para>

</sect2>

<sect2>
<title>Group Mapping Changes in Samba-3.0.23</title>

<para>
<indexterm><primary>default mapping</primary></indexterm>
<indexterm><primary>Domain Admins</primary></indexterm>
<indexterm><primary>smbpasswd</primary></indexterm>
<indexterm><primary>tdbsam</primary></indexterm>
<indexterm><primary>passdb backend</primary></indexterm>
<indexterm><primary>group mappings</primary></indexterm>
<indexterm><primary>GID</primary></indexterm>
<indexterm><primary>SID</primary></indexterm>
<indexterm><primary>IDMAP</primary></indexterm>
<indexterm><primary>winbindd</primary></indexterm>
<indexterm><primary>domain groups</primary></indexterm>
The default mapping entries for groups such as <literal>Domain Admins</literal> are no longer
created when using an <literal>smbpasswd</literal> file or a <literal>tdbsam</literal> passdb
backend.  This means that it is necessary to explicitly execute the <command>net groupmap add</command>
to create group mappings, rather than use the <command>net groupmap modify</command> method to create the
Windows group SID to UNIX GID mappings.  This change has no effect on winbindd's IDMAP functionality
for domain groups.
</para>

</sect2>

<sect2>
<title>LDAP Changes in Samba-3.0.23</title>

<para>
<indexterm><primary>LDAP schema</primary></indexterm>
<indexterm><primary>sambaSID</primary></indexterm>
<indexterm><primary>OpenLDAP</primary></indexterm>
<indexterm><primary>slapindex</primary></indexterm>
<indexterm><primary>slapd.conf</primary></indexterm>
There has been a minor update the Samba LDAP schema file. A substring matching rule has been
added to the <literal>sambaSID</literal> attribute definition.  For OpenLDAP servers, this
will require the addition of <literal>index sambaSID sub</literal> to the
<filename>slapd.conf</filename> configuration file.  It will be necessary to execute the
<command>slapindex</command> command after making this change. There has been no change to the
actual data storage schema.
</para>

</sect2>
</sect1>

</chapter>