selftest/target/Samba3.pm

   1 #!/usr/bin/perl
   2 # Bootstrap Samba and run a number of tests against it.
   3 # Copyright (C) 2005-2007 Jelmer Vernooij <jelmer@samba.org>
   4 # Published under the GNU GPL, v3 or later.
   5
   6 package Samba3;
   7
   8 use strict;
   9 use Cwd qw(abs_path);
  10 use FindBin qw($RealBin);
  11 use POSIX;
  12 use target::Samba;
  13
  14 sub have_ads($) {
  15         my ($self) = @_;
  16         my $found_ads = 0;
  17         my $smbd_build_options = Samba::bindir_path($self, "smbd") . " -b|";
  18         open(IN, $smbd_build_options) or die("Unable to run $smbd_build_options: $!");
  19
  20         while (<IN>) {
  21                 if (/WITH_ADS/) {
  22                        $found_ads = 1;
  23                 }
  24         }
  25         close IN;
  26
  27         # If we were not built with ADS support, pretend we were never even available
  28         print "smbd does not have ADS support\n" unless $found_ads;
  29         return $found_ads;
  30 }
  31
  32 # return smb.conf parameters applicable to @path, based on the underlying
  33 # filesystem type
  34 sub get_fs_specific_conf($$)
  35 {
  36         my ($self, $path) = @_;
  37         my $mods = "";
  38         my $stat_out = `stat --file-system $path` or return "";
  39
  40         if ($stat_out =~ m/Type:\s+btrfs/) {
  41                 $mods .= "btrfs ";
  42         }
  43
  44         if ($mods) {
  45                 return "vfs objects = $mods";
  46         }
  47
  48         return undef;
  49 }
  50
  51 sub new($$) {
  52         my ($classname, $bindir, $binary_mapping, $srcdir, $server_maxtime) = @_;
  53         my $self = { vars => {},
  54                      bindir => $bindir,
  55                      binary_mapping => $binary_mapping,
  56                      srcdir => $srcdir,
  57                      server_maxtime => $server_maxtime
  58         };
  59         bless $self;
  60         return $self;
  61 }
  62
  63 sub teardown_env($$)
  64 {
  65         my ($self, $envvars) = @_;
  66         my $count = 0;
  67
  68         # This should cause smbd to terminate gracefully
  69         close($envvars->{STDIN_PIPE});
  70
  71         my $smbdpid = $envvars->{SMBD_TL_PID};
  72         my $nmbdpid = $envvars->{NMBD_TL_PID};
  73         my $winbinddpid = $envvars->{WINBINDD_TL_PID};
  74
  75         # This should give it time to write out the gcov data
  76         until ($count > 20) {
  77             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  78             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
  79             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
  80             if ($smbdchild == -1
  81                 && $nmbdchild == -1
  82                 && $winbinddchild == -1) {
  83                 last;
  84             }
  85             sleep(1);
  86             $count++;
  87         }
  88
  89         if ($count <= 20 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
  90             return;
  91         }
  92
  93         $self->stop_sig_term($smbdpid);
  94         $self->stop_sig_term($nmbdpid);
  95         $self->stop_sig_term($winbinddpid);
  96
  97         $count = 0;
  98         until ($count > 10) {
  99             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
 100             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
 101             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
 102             if ($smbdchild == -1
 103                 && $nmbdchild == -1
 104                 && $winbinddchild == -1) {
 105                 last;
 106             }
 107             sleep(1);
 108             $count++;
 109         }
 110
 111         if ($count <= 10 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
 112             return;
 113         }
 114
 115         warn("timelimit process did not quit on SIGTERM, sending SIGKILL");
 116         $self->stop_sig_kill($smbdpid);
 117         $self->stop_sig_kill($nmbdpid);
 118         $self->stop_sig_kill($winbinddpid);
 119
 120         return 0;
 121 }
 122
 123 sub getlog_env_app($$$)
 124 {
 125         my ($self, $envvars, $name) = @_;
 126
 127         my $title = "$name LOG of: $envvars->{NETBIOSNAME}\n";
 128         my $out = $title;
 129
 130         open(LOG, "<".$envvars->{$name."_TEST_LOG"});
 131
 132         seek(LOG, $envvars->{$name."_TEST_LOG_POS"}, SEEK_SET);
 133         while (<LOG>) {
 134                 $out .= $_;
 135         }
 136         $envvars->{$name."_TEST_LOG_POS"} = tell(LOG);
 137         close(LOG);
 138
 139         return "" if $out eq $title;
 140
 141         return $out;
 142 }
 143
 144 sub getlog_env($$)
 145 {
 146         my ($self, $envvars) = @_;
 147         my $ret = "";
 148
 149         $ret .= $self->getlog_env_app($envvars, "SMBD");
 150         $ret .= $self->getlog_env_app($envvars, "NMBD");
 151         $ret .= $self->getlog_env_app($envvars, "WINBINDD");
 152
 153         return $ret;
 154 }
 155
 156 sub check_env($$)
 157 {
 158         my ($self, $envvars) = @_;
 159
 160         my $childpid = waitpid(-1, WNOHANG);
 161
 162         # TODO ...
 163         return 1;
 164 }
 165
 166 sub setup_env($$$)
 167 {
 168         my ($self, $envname, $path) = @_;
 169
 170         $ENV{ENVNAME} = $envname;
 171
 172         if (defined($self->{vars}->{$envname})) {
 173                 return $self->{vars}->{$envname};
 174         }
 175
 176         if ($envname eq "s3dc") {
 177                 return $self->setup_s3dc("$path/s3dc");
 178         } elsif ($envname eq "simpleserver") {
 179                 return $self->setup_simpleserver("$path/simpleserver");
 180         } elsif ($envname eq "maptoguest") {
 181                 return $self->setup_maptoguest("$path/maptoguest");
 182         } elsif ($envname eq "ktest") {
 183                 return $self->setup_ktest("$path/ktest");
 184         } elsif ($envname eq "member") {
 185                 if (not defined($self->{vars}->{s3dc})) {
 186                         if (not defined($self->setup_s3dc("$path/s3dc"))) {
 187                                 return undef;
 188                         }
 189                 }
 190                 return $self->setup_member("$path/member", $self->{vars}->{s3dc});
 191         } else {
 192                 return "UNKNOWN";
 193         }
 194 }
 195
 196 sub setup_s3dc($$)
 197 {
 198         my ($self, $path) = @_;
 199
 200         print "PROVISIONING S3DC...";
 201
 202         my $s3dc_options = "
 203         domain master = yes
 204         domain logons = yes
 205         lanman auth = yes
 206
 207         rpc_server:epmapper = external
 208         rpc_server:spoolss = external
 209         rpc_server:lsarpc = external
 210         rpc_server:samr = external
 211         rpc_server:netlogon = external
 212         rpc_server:register_embedded_np = yes
 213
 214         rpc_daemon:epmd = fork
 215         rpc_daemon:spoolssd = fork
 216         rpc_daemon:lsasd = fork
 217 ";
 218
 219         my $vars = $self->provision($path,
 220                                     "LOCALS3DC2",
 221                                     "locals3dc2pass",
 222                                     $s3dc_options);
 223
 224         $vars or return undef;
 225
 226         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 227                return undef;
 228         }
 229
 230         $vars->{DC_SERVER} = $vars->{SERVER};
 231         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 232         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 233         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 234         $vars->{DC_USERNAME} = $vars->{USERNAME};
 235         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 236
 237         $self->{vars}->{s3dc} = $vars;
 238
 239         return $vars;
 240 }
 241
 242 sub setup_member($$$)
 243 {
 244         my ($self, $prefix, $s3dcvars) = @_;
 245
 246         print "PROVISIONING MEMBER...";
 247
 248         my $member_options = "
 249         security = domain
 250         server signing = on
 251         dbwrap_tdb_mutexes:* = yes
 252 ";
 253         my $ret = $self->provision($prefix,
 254                                    "LOCALMEMBER3",
 255                                    "localmember3pass",
 256                                    $member_options);
 257
 258         $ret or return undef;
 259
 260         my $net = Samba::bindir_path($self, "net");
 261         my $cmd = "";
 262         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 263         $cmd .= "$net join $ret->{CONFIGURATION} $s3dcvars->{DOMAIN} member";
 264         $cmd .= " -U$s3dcvars->{USERNAME}\%$s3dcvars->{PASSWORD}";
 265
 266         if (system($cmd) != 0) {
 267             warn("Join failed\n$cmd");
 268             return undef;
 269         }
 270
 271         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 272                return undef;
 273         }
 274
 275         $ret->{DC_SERVER} = $s3dcvars->{SERVER};
 276         $ret->{DC_SERVER_IP} = $s3dcvars->{SERVER_IP};
 277         $ret->{DC_SERVER_IPV6} = $s3dcvars->{SERVER_IPV6};
 278         $ret->{DC_NETBIOSNAME} = $s3dcvars->{NETBIOSNAME};
 279         $ret->{DC_USERNAME} = $s3dcvars->{USERNAME};
 280         $ret->{DC_PASSWORD} = $s3dcvars->{PASSWORD};
 281
 282         return $ret;
 283 }
 284
 285 sub setup_admember($$$$)
 286 {
 287         my ($self, $prefix, $dcvars) = @_;
 288
 289         # If we didn't build with ADS, pretend this env was never available
 290         if (not $self->have_ads()) {
 291                 return "UNKNOWN";
 292         }
 293
 294         print "PROVISIONING S3 AD MEMBER...";
 295
 296         my $member_options = "
 297         security = ads
 298         server signing = on
 299         workgroup = $dcvars->{DOMAIN}
 300         realm = $dcvars->{REALM}
 301 ";
 302
 303         my $ret = $self->provision($prefix,
 304                                    "LOCALADMEMBER",
 305                                    "loCalMemberPass",
 306                                    $member_options);
 307
 308         $ret or return undef;
 309
 310         close(USERMAP);
 311         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 312         $ret->{REALM} = $dcvars->{REALM};
 313
 314         my $ctx;
 315         my $prefix_abs = abs_path($prefix);
 316         $ctx = {};
 317         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 318         $ctx->{domain} = $dcvars->{DOMAIN};
 319         $ctx->{realm} = $dcvars->{REALM};
 320         $ctx->{dnsname} = lc($dcvars->{REALM});
 321         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 322         Samba::mk_krb5_conf($ctx, "");
 323
 324         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 325
 326         my $net = Samba::bindir_path($self, "net");
 327         my $cmd = "";
 328         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 329         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 330         $cmd .= "$net join $ret->{CONFIGURATION}";
 331         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 332
 333         if (system($cmd) != 0) {
 334             warn("Join failed\n$cmd");
 335             return undef;
 336         }
 337
 338         # We need world access to this share, as otherwise the domain
 339         # administrator from the AD domain provided by Samba4 can't
 340         # access the share for tests.
 341         chmod 0777, "$prefix/share";
 342
 343         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 344                 return undef;
 345         }
 346
 347         $ret->{DC_SERVER} = $dcvars->{SERVER};
 348         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 349         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 350         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 351         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 352         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 353
 354         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 355         $ret->{target} = $self;
 356
 357         return $ret;
 358 }
 359
 360 sub setup_admember_rfc2307($$$$)
 361 {
 362         my ($self, $prefix, $dcvars) = @_;
 363
 364         # If we didn't build with ADS, pretend this env was never available
 365         if (not $self->have_ads()) {
 366                 return "UNKNOWN";
 367         }
 368
 369         print "PROVISIONING S3 AD MEMBER WITH idmap_rfc2307 config...";
 370
 371         my $member_options = "
 372         security = ads
 373         server signing = on
 374         workgroup = $dcvars->{DOMAIN}
 375         realm = $dcvars->{REALM}
 376         idmap config $dcvars->{DOMAIN} : backend = rfc2307
 377         idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
 378         idmap config $dcvars->{DOMAIN} : ldap_server = ad
 379         idmap config $dcvars->{DOMAIN} : bind_path_user = ou=idmap,dc=samba,dc=example,dc=com
 380         idmap config $dcvars->{DOMAIN} : bind_path_group = ou=idmap,dc=samba,dc=example,dc=com
 381 ";
 382
 383         my $ret = $self->provision($prefix,
 384                                    "RFC2307MEMBER",
 385                                    "loCalMemberPass",
 386                                    $member_options);
 387
 388         $ret or return undef;
 389
 390         close(USERMAP);
 391         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 392         $ret->{REALM} = $dcvars->{REALM};
 393
 394         my $ctx;
 395         my $prefix_abs = abs_path($prefix);
 396         $ctx = {};
 397         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 398         $ctx->{domain} = $dcvars->{DOMAIN};
 399         $ctx->{realm} = $dcvars->{REALM};
 400         $ctx->{dnsname} = lc($dcvars->{REALM});
 401         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 402         Samba::mk_krb5_conf($ctx, "");
 403
 404         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 405
 406         my $net = Samba::bindir_path($self, "net");
 407         my $cmd = "";
 408         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 409         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 410         $cmd .= "$net join $ret->{CONFIGURATION}";
 411         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 412
 413         if (system($cmd) != 0) {
 414             warn("Join failed\n$cmd");
 415             return undef;
 416         }
 417
 418         # We need world access to this share, as otherwise the domain
 419         # administrator from the AD domain provided by Samba4 can't
 420         # access the share for tests.
 421         chmod 0777, "$prefix/share";
 422
 423         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 424                 return undef;
 425         }
 426
 427         $ret->{DC_SERVER} = $dcvars->{SERVER};
 428         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 429         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 430         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 431         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 432         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 433
 434         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 435         $ret->{target} = $self;
 436
 437         return $ret;
 438 }
 439
 440 sub setup_simpleserver($$)
 441 {
 442         my ($self, $path) = @_;
 443
 444         print "PROVISIONING server with security=share...";
 445
 446         my $prefix_abs = abs_path($path);
 447
 448         my $simpleserver_options = "
 449         lanman auth = yes
 450         vfs objects = xattr_tdb streams_depot
 451
 452 [vfs_aio_fork]
 453         path = $prefix_abs/share
 454         vfs objects = aio_fork
 455         read only = no
 456         vfs_aio_fork:erratic_testing_mode=yes
 457 ";
 458
 459         my $vars = $self->provision($path,
 460                                     "LOCALSHARE4",
 461                                     "local4pass",
 462                                     $simpleserver_options);
 463
 464         $vars or return undef;
 465
 466         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 467                return undef;
 468         }
 469
 470         $self->{vars}->{simpleserver} = $vars;
 471
 472         return $vars;
 473 }
 474
 475 sub setup_ktest($$$)
 476 {
 477         my ($self, $prefix) = @_;
 478
 479         # If we didn't build with ADS, pretend this env was never available
 480         if (not $self->have_ads()) {
 481                 return "UNKNOWN";
 482         }
 483
 484         print "PROVISIONING server with security=ads...";
 485
 486         my $ktest_options = "
 487         workgroup = KTEST
 488         realm = ktest.samba.example.com
 489         security = ads
 490         username map = $prefix/lib/username.map
 491         server signing = required
 492 ";
 493
 494         my $ret = $self->provision($prefix,
 495                                    "LOCALKTEST6",
 496                                    "localktest6pass",
 497                                    $ktest_options);
 498
 499         $ret or return undef;
 500
 501         my $ctx;
 502         my $prefix_abs = abs_path($prefix);
 503         $ctx = {};
 504         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 505         $ctx->{domain} = "KTEST";
 506         $ctx->{realm} = "KTEST.SAMBA.EXAMPLE.COM";
 507         $ctx->{dnsname} = lc($ctx->{realm});
 508         $ctx->{kdc_ipv4} = "0.0.0.0";
 509         Samba::mk_krb5_conf($ctx, "");
 510
 511         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 512
 513         open(USERMAP, ">$prefix/lib/username.map") or die("Unable to open $prefix/lib/username.map");
 514         print USERMAP "
 515 $ret->{USERNAME} = KTEST\\Administrator
 516 ";
 517         close(USERMAP);
 518
 519 #This is the secrets.tdb created by 'net ads join' from Samba3 to a
 520 #Samba4 DC with the same parameters as are being used here.  The
 521 #domain SID is S-1-5-21-1071277805-689288055-3486227160
 522
 523         system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb $prefix/private/secrets.tdb");
 524         chmod 0600, "$prefix/private/secrets.tdb";
 525
 526 #Make sure there's no old ntdb file.
 527         system("rm -f $prefix/private/secrets.ntdb");
 528
 529 #This uses a pre-calculated krb5 credentials cache, obtained by running Samba4 with:
 530 # "--option=kdc:service ticket lifetime=239232" "--option=kdc:user ticket lifetime=239232" "--option=kdc:renewal lifetime=239232"
 531 #
 532 #and having in krb5.conf:
 533 # ticket_lifetime = 799718400
 534 # renew_lifetime = 799718400
 535 #
 536 # The commands for the -2 keytab where were:
 537 # kinit administrator@KTEST.SAMBA.EXAMPLE.COM
 538 # kvno host/localktest6@KTEST.SAMBA.EXAMPLE.COM
 539 # kvno cifs/localktest6@KTEST.SAMBA.EXAMPLE.COM
 540 # kvno host/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 541 # kvno cifs/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 542 #
 543 # and then for the -3 keytab, I did
 544 #
 545 # net changetrustpw; kdestroy and the same again.
 546 #
 547 # This creates a credential cache with a very long lifetime (2036 at
 548 # at 2011-04), and shows that running 'net changetrustpw' does not
 549 # break existing logins (for the secrets.tdb method at least).
 550 #
 551
 552         $ret->{KRB5_CCACHE}="FILE:$prefix/krb5_ccache";
 553
 554         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-2 $prefix/krb5_ccache-2");
 555         chmod 0600, "$prefix/krb5_ccache-2";
 556
 557         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-3 $prefix/krb5_ccache-3");
 558         chmod 0600, "$prefix/krb5_ccache-3";
 559
 560         # We need world access to this share, as otherwise the domain
 561         # administrator from the AD domain provided by ktest can't
 562         # access the share for tests.
 563         chmod 0777, "$prefix/share";
 564
 565         if (not $self->check_or_start($ret, "yes", "no", "yes")) {
 566                return undef;
 567         }
 568         return $ret;
 569 }
 570
 571 sub setup_maptoguest($$)
 572 {
 573         my ($self, $path) = @_;
 574
 575         print "PROVISIONING maptoguest...";
 576
 577         my $options = "
 578 map to guest = bad user
 579 ";
 580
 581         my $vars = $self->provision($path,
 582                                     "maptoguest",
 583                                     "maptoguestpass",
 584                                     $options);
 585
 586         $vars or return undef;
 587
 588         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 589                return undef;
 590         }
 591
 592         $self->{vars}->{s3maptoguest} = $vars;
 593
 594         return $vars;
 595 }
 596
 597 sub stop_sig_term($$) {
 598         my ($self, $pid) = @_;
 599         kill("USR1", $pid) or kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 600 }
 601
 602 sub stop_sig_kill($$) {
 603         my ($self, $pid) = @_;
 604         kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 605 }
 606
 607 sub write_pid($$$)
 608 {
 609         my ($env_vars, $app, $pid) = @_;
 610
 611         open(PID, ">$env_vars->{PIDDIR}/timelimit.$app.pid");
 612         print PID $pid;
 613         close(PID);
 614 }
 615
 616 sub read_pid($$)
 617 {
 618         my ($env_vars, $app) = @_;
 619
 620         open(PID, "<$env_vars->{PIDDIR}/timelimit.$app.pid");
 621         my $pid = <PID>;
 622         close(PID);
 623         return $pid;
 624 }
 625
 626 sub check_or_start($$$$$) {
 627         my ($self, $env_vars, $nmbd, $winbindd, $smbd) = @_;
 628
 629         # use a pipe for stdin in the child processes. This allows
 630         # those processes to monitor the pipe for EOF to ensure they
 631         # exit when the test script exits
 632         pipe(STDIN_READER, $env_vars->{STDIN_PIPE});
 633
 634         unlink($env_vars->{NMBD_TEST_LOG});
 635         print "STARTING NMBD...";
 636         my $pid = fork();
 637         if ($pid == 0) {
 638                 open STDOUT, ">$env_vars->{NMBD_TEST_LOG}";
 639                 open STDERR, '>&STDOUT';
 640
 641                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 642
 643                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 644                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 645                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 646
 647                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 648                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 649                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 650                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 651                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 652
 653                 $ENV{ENVNAME} = "$ENV{ENVNAME}.nmbd";
 654
 655                 if ($nmbd ne "yes") {
 656                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 657                                 my $signame = shift;
 658                                 print("Skip nmbd received signal $signame");
 659                                 exit 0;
 660                         };
 661                         sleep($self->{server_maxtime});
 662                         exit 0;
 663                 }
 664
 665                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
 666                 my @optargs = ("-d0");
 667                 if (defined($ENV{NMBD_OPTIONS})) {
 668                         @optargs = split(/ /, $ENV{NMBD_OPTIONS});
 669                 }
 670                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 671                 if(defined($ENV{NMBD_VALGRIND})) {
 672                         @preargs = split(/ /, $ENV{NMBD_VALGRIND});
 673                 }
 674                 my @args = ("-F", "--no-process-group",
 675                             "-s", $env_vars->{SERVERCONFFILE},
 676                             "-l", $env_vars->{LOGDIR});
 677                 if (not defined($ENV{NMBD_DONT_LOG_STDOUT})) {
 678                         push(@args, "--log-stdout");
 679                 }
 680
 681                 close($env_vars->{STDIN_PIPE});
 682                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 683
 684                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
 685                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
 686         }
 687         $env_vars->{NMBD_TL_PID} = $pid;
 688         write_pid($env_vars, "nmbd", $pid);
 689         print "DONE\n";
 690
 691         unlink($env_vars->{WINBINDD_TEST_LOG});
 692         print "STARTING WINBINDD...";
 693         $pid = fork();
 694         if ($pid == 0) {
 695                 open STDOUT, ">$env_vars->{WINBINDD_TEST_LOG}";
 696                 open STDERR, '>&STDOUT';
 697
 698                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 699
 700                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 701                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 702                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 703
 704                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 705                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 706                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 707                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 708                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 709
 710                 $ENV{ENVNAME} = "$ENV{ENVNAME}.winbindd";
 711
 712                 if ($winbindd ne "yes") {
 713                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 714                                 my $signame = shift;
 715                                 print("Skip winbindd received signal $signame");
 716                                 exit 0;
 717                         };
 718                         sleep($self->{server_maxtime});
 719                         exit 0;
 720                 }
 721
 722                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
 723                 my @optargs = ("-d0");
 724                 if (defined($ENV{WINBINDD_OPTIONS})) {
 725                         @optargs = split(/ /, $ENV{WINBINDD_OPTIONS});
 726                 }
 727                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 728                 if(defined($ENV{WINBINDD_VALGRIND})) {
 729                         @preargs = split(/ /, $ENV{WINBINDD_VALGRIND});
 730                 }
 731                 my @args = ("-F", "--no-process-group",
 732                             "-s", $env_vars->{SERVERCONFFILE},
 733                             "-l", $env_vars->{LOGDIR});
 734                 if (not defined($ENV{WINBINDD_DONT_LOG_STDOUT})) {
 735                         push(@args, "--stdout");
 736                 }
 737
 738                 close($env_vars->{STDIN_PIPE});
 739                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 740
 741                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
 742                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
 743         }
 744         $env_vars->{WINBINDD_TL_PID} = $pid;
 745         write_pid($env_vars, "winbindd", $pid);
 746         print "DONE\n";
 747
 748         unlink($env_vars->{SMBD_TEST_LOG});
 749         print "STARTING SMBD...";
 750         $pid = fork();
 751         if ($pid == 0) {
 752                 open STDOUT, ">$env_vars->{SMBD_TEST_LOG}";
 753                 open STDERR, '>&STDOUT';
 754
 755                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 756
 757                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 758                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 759                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 760
 761                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 762                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 763                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 764                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 765                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 766
 767                 $ENV{ENVNAME} = "$ENV{ENVNAME}.smbd";
 768
 769                 if ($smbd ne "yes") {
 770                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 771                                 my $signame = shift;
 772                                 print("Skip smbd received signal $signame");
 773                                 exit 0;
 774                         };
 775                         sleep($self->{server_maxtime});
 776                         exit 0;
 777                 }
 778
 779                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "smbd");
 780                 my @optargs = ("-d0");
 781                 if (defined($ENV{SMBD_OPTIONS})) {
 782                         @optargs = split(/ /, $ENV{SMBD_OPTIONS});
 783                 }
 784                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 785                 if(defined($ENV{SMBD_VALGRIND})) {
 786                         @preargs = split(/ /,$ENV{SMBD_VALGRIND});
 787                 }
 788                 my @args = ("-F", "--no-process-group",
 789                             "-s", $env_vars->{SERVERCONFFILE},
 790                             "-l", $env_vars->{LOGDIR});
 791                 if (not defined($ENV{SMBD_DONT_LOG_STDOUT})) {
 792                         push(@args, "--log-stdout");
 793                 }
 794
 795                 close($env_vars->{STDIN_PIPE});
 796                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 797
 798                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
 799                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
 800         }
 801         $env_vars->{SMBD_TL_PID} = $pid;
 802         write_pid($env_vars, "smbd", $pid);
 803         print "DONE\n";
 804
 805         close(STDIN_READER);
 806
 807         return $self->wait_for_start($env_vars, $nmbd, $winbindd, $smbd);
 808 }
 809
 810 sub provision($$$$$$)
 811 {
 812         my ($self, $prefix, $server, $password, $extra_options, $no_delete_prefix) = @_;
 813
 814         ##
 815         ## setup the various environment variables we need
 816         ##
 817
 818         my $swiface = Samba::get_interface($server);
 819         my %ret = ();
 820         my $server_ip = "127.0.0.$swiface";
 821         my $server_ipv6 = sprintf("fd00:0000:0000:0000:0000:0000:5357:5f%02x", $swiface);
 822         my $domain = "SAMBA-TEST";
 823
 824         my $unix_name = ($ENV{USER} or $ENV{LOGNAME} or `PATH=/usr/ucb:$ENV{PATH} whoami`);
 825         chomp $unix_name;
 826         my $unix_uid = $>;
 827         my $unix_gids_str = $);
 828         my @unix_gids = split(" ", $unix_gids_str);
 829
 830         my $prefix_abs = abs_path($prefix);
 831         my $bindir_abs = abs_path($self->{bindir});
 832
 833         my $dns_host_file = "$ENV{SELFTEST_PREFIX}/dns_host_file";
 834
 835         my @dirs = ();
 836
 837         my $shrdir="$prefix_abs/share";
 838         push(@dirs,$shrdir);
 839
 840         my $libdir="$prefix_abs/lib";
 841         push(@dirs,$libdir);
 842
 843         my $piddir="$prefix_abs/pid";
 844         push(@dirs,$piddir);
 845
 846         my $privatedir="$prefix_abs/private";
 847         push(@dirs,$privatedir);
 848
 849         my $lockdir="$prefix_abs/lockdir";
 850         push(@dirs,$lockdir);
 851
 852         my $eventlogdir="$prefix_abs/lockdir/eventlog";
 853         push(@dirs,$eventlogdir);
 854
 855         my $logdir="$prefix_abs/logs";
 856         push(@dirs,$logdir);
 857
 858         my $driver32dir="$shrdir/W32X86";
 859         push(@dirs,$driver32dir);
 860
 861         my $driver64dir="$shrdir/x64";
 862         push(@dirs,$driver64dir);
 863
 864         my $driver40dir="$shrdir/WIN40";
 865         push(@dirs,$driver40dir);
 866
 867         my $ro_shrdir="$shrdir/root-tmp";
 868         push(@dirs,$ro_shrdir);
 869
 870         my $msdfs_shrdir="$shrdir/msdfsshare";
 871         push(@dirs,$msdfs_shrdir);
 872
 873         my $msdfs_deeppath="$msdfs_shrdir/deeppath";
 874         push(@dirs,$msdfs_deeppath);
 875
 876         my $badnames_shrdir="$shrdir/badnames";
 877         push(@dirs,$badnames_shrdir);
 878
 879         # this gets autocreated by winbindd
 880         my $wbsockdir="$prefix_abs/winbindd";
 881         my $wbsockprivdir="$lockdir/winbindd_privileged";
 882
 883         my $nmbdsockdir="$prefix_abs/nmbd";
 884         unlink($nmbdsockdir);
 885
 886         ##
 887         ## create the test directory layout
 888         ##
 889         die ("prefix_abs = ''") if $prefix_abs eq "";
 890         die ("prefix_abs = '/'") if $prefix_abs eq "/";
 891
 892         mkdir($prefix_abs, 0777);
 893         print "CREATE TEST ENVIRONMENT IN '$prefix'...";
 894         if (not defined($no_delete_prefix) or not $no_delete_prefix) {
 895             system("rm -rf $prefix_abs/*");
 896         }
 897         mkdir($_, 0777) foreach(@dirs);
 898
 899         my $fs_specific_conf = $self->get_fs_specific_conf($shrdir);
 900
 901         ##
 902         ## lockdir and piddir must be 0755
 903         ##
 904         chmod 0755, $lockdir;
 905         chmod 0755, $piddir;
 906
 907
 908         ##
 909         ## create ro and msdfs share layout
 910         ##
 911
 912         chmod 0755, $ro_shrdir;
 913         my $unreadable_file = "$ro_shrdir/unreadable_file";
 914         unless (open(UNREADABLE_FILE, ">$unreadable_file")) {
 915                 warn("Unable to open $unreadable_file");
 916                 return undef;
 917         }
 918         close(UNREADABLE_FILE);
 919         chmod 0600, $unreadable_file;
 920
 921         my $msdfs_target = "$ro_shrdir/msdfs-target";
 922         unless (open(MSDFS_TARGET, ">$msdfs_target")) {
 923                 warn("Unable to open $msdfs_target");
 924                 return undef;
 925         }
 926         close(MSDFS_TARGET);
 927         chmod 0666, $msdfs_target;
 928         symlink "msdfs:$server_ip\\ro-tmp", "$msdfs_shrdir/msdfs-src1";
 929         symlink "msdfs:$server_ipv6\\ro-tmp", "$msdfs_shrdir/deeppath/msdfs-src2";
 930
 931         ##
 932         ## create bad names in $badnames_shrdir
 933         ##
 934         ## (An invalid name, would be mangled to 8.3).
 935         my $badname_target = "$badnames_shrdir/\340|\231\216\377\177";
 936         unless (open(BADNAME_TARGET, ">$badname_target")) {
 937                 warn("Unable to open $badname_target");
 938                 return undef;
 939         }
 940         close(BADNAME_TARGET);
 941         chmod 0666, $badname_target;
 942
 943         ## (A bad name, would not be mangled to 8.3).
 944         my $badname_target = "$badnames_shrdir/\240\276\346\327\377\177";
 945         unless (open(BADNAME_TARGET, ">$badname_target")) {
 946                 warn("Unable to open $badname_target");
 947                 return undef;
 948         }
 949         close(BADNAME_TARGET);
 950         chmod 0666, $badname_target;
 951
 952         ## (A bad good name).
 953         my $badname_target = "$badnames_shrdir/blank.txt";
 954         unless (open(BADNAME_TARGET, ">$badname_target")) {
 955                 warn("Unable to open $badname_target");
 956                 return undef;
 957         }
 958         close(BADNAME_TARGET);
 959         chmod 0666, $badname_target;
 960
 961         my $conffile="$libdir/server.conf";
 962
 963         my $nss_wrapper_pl = "$ENV{PERL} $self->{srcdir}/lib/nss_wrapper/nss_wrapper.pl";
 964         my $nss_wrapper_passwd = "$privatedir/passwd";
 965         my $nss_wrapper_group = "$privatedir/group";
 966         my $nss_wrapper_hosts = "$ENV{SELFTEST_PREFIX}/hosts";
 967
 968         my $mod_printer_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/printing/modprinter.pl";
 969
 970         my @eventlog_list = ("dns server", "application");
 971
 972         ##
 973         ## calculate uids and gids
 974         ##
 975
 976         my ($max_uid, $max_gid);
 977         my ($uid_nobody, $uid_root, $uid_pdbtest, $uid_pdbtest2);
 978         my ($gid_nobody, $gid_nogroup, $gid_root, $gid_domusers, $gid_domadmins);
 979
 980         if ($unix_uid < 0xffff - 4) {
 981                 $max_uid = 0xffff;
 982         } else {
 983                 $max_uid = $unix_uid;
 984         }
 985
 986         $uid_root = $max_uid - 1;
 987         $uid_nobody = $max_uid - 2;
 988         $uid_pdbtest = $max_uid - 3;
 989         $uid_pdbtest2 = $max_uid - 4;
 990
 991         if ($unix_gids[0] < 0xffff - 5) {
 992                 $max_gid = 0xffff;
 993         } else {
 994                 $max_gid = $unix_gids[0];
 995         }
 996
 997         $gid_nobody = $max_gid - 1;
 998         $gid_nogroup = $max_gid - 2;
 999         $gid_root = $max_gid - 3;
1000         $gid_domusers = $max_gid - 4;
1001         $gid_domadmins = $max_gid - 5;
1002
1003         ##
1004         ## create conffile
1005         ##
1006
1007         unless (open(CONF, ">$conffile")) {
1008                 warn("Unable to open $conffile");
1009                 return undef;
1010         }
1011         print CONF "
1012 [global]
1013         netbios name = $server
1014         interfaces = $server_ip/8 $server_ipv6/64
1015         bind interfaces only = yes
1016         panic action = cd $self->{srcdir} && $self->{srcdir}/selftest/gdb_backtrace %d %\$(MAKE_TEST_BINARY)
1017         smbd:suicide mode = yes
1018
1019         workgroup = $domain
1020
1021         private dir = $privatedir
1022         pid directory = $piddir
1023         lock directory = $lockdir
1024         log file = $logdir/log.\%m
1025         log level = 1
1026         debug pid = yes
1027         max log size = 0
1028
1029         state directory = $lockdir
1030         cache directory = $lockdir
1031
1032         passdb backend = tdbsam
1033
1034         time server = yes
1035
1036         add user script =               $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1037         add group script =              $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action add --name %g
1038         add machine script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1039         add user to group script =      $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action add --member %u --name %g --group_path $nss_wrapper_group
1040         delete user script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action delete --name %u
1041         delete group script =           $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action delete --name %g
1042         delete user from group script = $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action delete --member %u --name %g --group_path $nss_wrapper_group
1043
1044         addprinter command =            $mod_printer_pl -a -s $conffile --
1045         deleteprinter command =         $mod_printer_pl -d -s $conffile --
1046
1047         eventlog list = application \"dns server\"
1048
1049         kernel oplocks = no
1050         kernel change notify = no
1051
1052         syslog = no
1053         printing = bsd
1054         printcap name = /dev/null
1055
1056         winbindd socket directory = $wbsockdir
1057         nmbd:socket dir = $nmbdsockdir
1058         idmap config * : range = 100000-200000
1059         winbind enum users = yes
1060         winbind enum groups = yes
1061         winbind separator = /
1062
1063 #       min receivefile size = 4000
1064
1065         read only = no
1066         server signing = auto
1067
1068         smbd:sharedelay = 100000
1069         smbd:writetimeupdatedelay = 500000
1070         map hidden = no
1071         map system = no
1072         map readonly = no
1073         store dos attributes = yes
1074         create mask = 755
1075         dos filemode = yes
1076         vfs objects = acl_xattr fake_acls xattr_tdb streams_depot
1077
1078         printing = vlp
1079         print command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb print %p %s
1080         lpq command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpq %p
1081         lp rm command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lprm %p %j
1082         lp pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lppause %p %j
1083         lp resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpresume %p %j
1084         queue pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queuepause %p
1085         queue resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queueresume %p
1086         lpq cache time = 0
1087         print notify backchannel = yes
1088
1089         ncalrpc dir = $prefix_abs/ncalrpc
1090         resolv:host file = $dns_host_file
1091
1092         # The samba3.blackbox.smbclient_s3 test uses this to test that
1093         # sending messages works, and that the %m sub works.
1094         message command = mv %s $shrdir/message.%m
1095
1096         # Begin extra options
1097         $extra_options
1098         # End extra options
1099
1100         #Include user defined custom parameters if set
1101 ";
1102
1103         if (defined($ENV{INCLUDE_CUSTOM_CONF})) {
1104                 print CONF "\t$ENV{INCLUDE_CUSTOM_CONF}\n";
1105         }
1106
1107         print CONF "
1108 [tmp]
1109         path = $shrdir
1110         comment = smb username is [%U]
1111 [tmpsort]
1112         path = $shrdir
1113         comment = Load dirsort module
1114         vfs objects = dirsort acl_xattr fake_acls xattr_tdb streams_depot
1115 [tmpenc]
1116         path = $shrdir
1117         comment = encrypt smb username is [%U]
1118         smb encrypt = required
1119         vfs objects = dirsort
1120 [tmpguest]
1121         path = $shrdir
1122         guest ok = yes
1123 [guestonly]
1124         path = $shrdir
1125         guest only = yes
1126         guest ok = yes
1127 [forceuser]
1128         path = $shrdir
1129         force user = $unix_name
1130         guest ok = yes
1131 [forcegroup]
1132         path = $shrdir
1133         force group = nogroup
1134         guest ok = yes
1135 [ro-tmp]
1136         path = $ro_shrdir
1137         guest ok = yes
1138 [write-list-tmp]
1139         path = $shrdir
1140         read only = yes
1141         write list = $unix_name
1142 [valid-users-tmp]
1143         path = $shrdir
1144         valid users = $unix_name
1145 [msdfs-share]
1146         path = $msdfs_shrdir
1147         msdfs root = yes
1148         guest ok = yes
1149 [hideunread]
1150         copy = tmp
1151         hide unreadable = yes
1152 [tmpcase]
1153         copy = tmp
1154         case sensitive = yes
1155 [hideunwrite]
1156         copy = tmp
1157         hide unwriteable files = yes
1158 [durable]
1159         copy = tmp
1160         kernel share modes = no
1161         kernel oplocks = no
1162         posix locking = no
1163 [fs_specific]
1164         copy = tmp
1165         $fs_specific_conf
1166 [print1]
1167         copy = tmp
1168         printable = yes
1169
1170 [print2]
1171         copy = print1
1172 [print3]
1173         copy = print1
1174         default devmode = no
1175 [lp]
1176         copy = print1
1177
1178 [nfs4acl_simple]
1179         path = $shrdir
1180         comment = smb username is [%U]
1181         nfs4:mode = simple
1182         vfs objects = nfs4acl_xattr xattr_tdb
1183
1184 [nfs4acl_special]
1185         path = $shrdir
1186         comment = smb username is [%U]
1187         nfs4:mode = special
1188         vfs objects = nfs4acl_xattr xattr_tdb
1189
1190 [xcopy_share]
1191         path = $shrdir
1192         comment = smb username is [%U]
1193         create mask = 777
1194         force create mode = 777
1195 [posix_share]
1196         path = $shrdir
1197         comment = smb username is [%U]
1198         create mask = 0777
1199         force create mode = 0
1200         directory mask = 0777
1201         force directory mode = 0
1202         vfs objects = xattr_tdb
1203 [aio]
1204         copy = tmp
1205         aio read size = 1
1206         aio write size = 1
1207
1208 [print\$]
1209         copy = tmp
1210
1211 [vfs_fruit]
1212         path = $shrdir
1213         vfs objects = catia fruit streams_xattr
1214         fruit:ressource = file
1215         fruit:metadata = netatalk
1216         fruit:locking = netatalk
1217         fruit:encoding = native
1218
1219 [badname-tmp]
1220         path = $badnames_shrdir
1221         guest ok = yes
1222         ";
1223         close(CONF);
1224
1225         ##
1226         ## create a test account
1227         ##
1228
1229         unless (open(PASSWD, ">$nss_wrapper_passwd")) {
1230            warn("Unable to open $nss_wrapper_passwd");
1231            return undef;
1232         }
1233         print PASSWD "nobody:x:$uid_nobody:$gid_nobody:nobody gecos:$prefix_abs:/bin/false
1234 $unix_name:x:$unix_uid:$unix_gids[0]:$unix_name gecos:$prefix_abs:/bin/false
1235 pdbtest:x:$uid_pdbtest:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
1236 pdbtest2:x:$uid_pdbtest2:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
1237 ";
1238         if ($unix_uid != 0) {
1239                 print PASSWD "root:x:$uid_root:$gid_root:root gecos:$prefix_abs:/bin/false
1240 ";
1241         }
1242         close(PASSWD);
1243
1244         unless (open(GROUP, ">$nss_wrapper_group")) {
1245              warn("Unable to open $nss_wrapper_group");
1246              return undef;
1247         }
1248         print GROUP "nobody:x:$gid_nobody:
1249 nogroup:x:$gid_nogroup:nobody
1250 $unix_name-group:x:$unix_gids[0]:
1251 domusers:X:$gid_domusers:
1252 domadmins:X:$gid_domadmins:
1253 ";
1254         if ($unix_gids[0] != 0) {
1255                 print GROUP "root:x:$gid_root:
1256 ";
1257         }
1258
1259         close(GROUP);
1260
1261         ## hosts
1262         my $hostname = lc($server);
1263         unless (open(HOSTS, ">>$nss_wrapper_hosts")) {
1264                 warn("Unable to open $nss_wrapper_hosts");
1265                 return undef;
1266         }
1267         print HOSTS "${server_ip} ${hostname}.samba.example.com ${hostname}\n";
1268         print HOSTS "${server_ipv6} ${hostname}.samba.example.com ${hostname}\n";
1269         close(HOSTS);
1270
1271
1272         foreach my $evlog (@eventlog_list) {
1273                 my $evlogtdb = "$eventlogdir/$evlog.tdb";
1274                 open(EVENTLOG, ">$evlogtdb") or die("Unable to open $evlogtdb");
1275                 close(EVENTLOG);
1276         }
1277
1278         $ENV{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1279         $ENV{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1280         $ENV{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
1281
1282         my $cmd = "UID_WRAPPER_ROOT=1 " . Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $unix_name > /dev/null";
1283         unless (open(PWD, "|$cmd")) {
1284              warn("Unable to set password for test account\n$cmd");
1285              return undef;
1286         }
1287         print PWD "$password\n$password\n";
1288         unless (close(PWD)) {
1289              warn("Unable to set password for test account\n$cmd");
1290              return undef;
1291         }
1292         print "DONE\n";
1293
1294         open(DNS_UPDATE_LIST, ">$prefix/dns_update_list") or die("Unable to open $$prefix/dns_update_list");
1295         print DNS_UPDATE_LIST "A $server. $server_ip\n";
1296         print DNS_UPDATE_LIST "AAAA $server. $server_ipv6\n";
1297         close(DNS_UPDATE_LIST);
1298
1299         if (system("$ENV{SRCDIR_ABS}/source4/scripting/bin/samba_dnsupdate --all-interfaces --use-file=$dns_host_file -s $conffile --update-list=$prefix/dns_update_list --update-cache=$prefix/dns_update_cache --no-substiutions --no-credentials") != 0) {
1300                 die "Unable to update hostname into $dns_host_file";
1301         }
1302
1303         $ret{SERVER_IP} = $server_ip;
1304         $ret{SERVER_IPV6} = $server_ipv6;
1305         $ret{NMBD_TEST_LOG} = "$prefix/nmbd_test.log";
1306         $ret{NMBD_TEST_LOG_POS} = 0;
1307         $ret{WINBINDD_TEST_LOG} = "$prefix/winbindd_test.log";
1308         $ret{WINBINDD_TEST_LOG_POS} = 0;
1309         $ret{SMBD_TEST_LOG} = "$prefix/smbd_test.log";
1310         $ret{SMBD_TEST_LOG_POS} = 0;
1311         $ret{SERVERCONFFILE} = $conffile;
1312         $ret{CONFIGURATION} ="-s $conffile";
1313         $ret{SERVER} = $server;
1314         $ret{USERNAME} = $unix_name;
1315         $ret{USERID} = $unix_uid;
1316         $ret{DOMAIN} = $domain;
1317         $ret{NETBIOSNAME} = $server;
1318         $ret{PASSWORD} = $password;
1319         $ret{PIDDIR} = $piddir;
1320         $ret{SELFTEST_WINBINDD_SOCKET_DIR} = $wbsockdir;
1321         $ret{WINBINDD_PRIV_PIPE_DIR} = $wbsockprivdir;
1322         $ret{NMBD_SOCKET_DIR} = $nmbdsockdir;
1323         $ret{SOCKET_WRAPPER_DEFAULT_IFACE} = $swiface;
1324         $ret{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1325         $ret{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1326         $ret{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
1327         $ret{NSS_WRAPPER_MODULE_SO_PATH} = Samba::nss_wrapper_winbind_so_path($self);
1328         $ret{NSS_WRAPPER_MODULE_FN_PREFIX} = "winbind";
1329         $ret{LOCAL_PATH} = "$shrdir";
1330         $ret{LOGDIR} = $logdir;
1331
1332         return \%ret;
1333 }
1334
1335 sub wait_for_start($$$$$)
1336 {
1337         my ($self, $envvars, $nmbd, $winbindd, $smbd) = @_;
1338         my $ret;
1339
1340         if ($nmbd eq "yes") {
1341                 my $count = 0;
1342
1343                 # give time for nbt server to register its names
1344                 print "checking for nmbd\n";
1345
1346                 # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
1347                 my $nmblookup = Samba::bindir_path($self, "nmblookup");
1348
1349                 do {
1350                         $ret = system("$nmblookup $envvars->{CONFIGURATION} $envvars->{SERVER}");
1351                         if ($ret != 0) {
1352                                 sleep(1);
1353                         } else {
1354                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
1355                                 system("$nmblookup $envvars->{CONFIGURATION} __SAMBA__");
1356                                 system("$nmblookup $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
1357                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
1358                         }
1359                         $count++;
1360                 } while ($ret != 0 && $count < 10);
1361                 if ($count == 10) {
1362                         print "NMBD not reachable after 10 retries\n";
1363                         teardown_env($self, $envvars);
1364                         return 0;
1365                 }
1366         }
1367
1368         if ($winbindd eq "yes") {
1369             print "checking for winbindd\n";
1370             my $count = 0;
1371             do {
1372                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --ping-dc");
1373                 if ($ret != 0) {
1374                     sleep(2);
1375                 }
1376                 $count++;
1377             } while ($ret != 0 && $count < 10);
1378             if ($count == 10) {
1379                 print "WINBINDD not reachable after 20 seconds\n";
1380                 teardown_env($self, $envvars);
1381                 return 0;
1382             }
1383         }
1384
1385         if ($smbd eq "yes") {
1386             # make sure smbd is also up set
1387             print "wait for smbd\n";
1388
1389             my $count = 0;
1390             do {
1391                 $ret = system(Samba::bindir_path($self, "smbclient3") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
1392                 if ($ret != 0) {
1393                     sleep(2);
1394                 }
1395                 $count++
1396             } while ($ret != 0 && $count < 10);
1397             if ($count == 10) {
1398                 print "SMBD failed to start up in a reasonable time (20sec)\n";
1399                 teardown_env($self, $envvars);
1400                 return 0;
1401             }
1402         }
1403
1404         # Ensure we have domain users mapped.
1405         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=513 unixgroup=domusers type=domain");
1406         if ($ret != 0) {
1407             return 1;
1408         }
1409         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=512 unixgroup=domadmins type=domain");
1410         if ($ret != 0) {
1411             return 1;
1412         }
1413
1414         if ($winbindd eq "yes") {
1415             # note: creating builtin groups requires winbindd for the
1416             # unix id allocator
1417             $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} sam createbuiltingroup Users");
1418             if ($ret != 0) {
1419                 print "Failed to create BUILTIN\\Users group\n";
1420                 return 0;
1421             }
1422             my $count = 0;
1423             do {
1424                 system(Samba::bindir_path($self, "net") . " $envvars->{CONFIGURATION} cache flush");
1425                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --sid-to-gid=S-1-5-32-545");
1426                 if ($ret != 0) {
1427                     sleep(2);
1428                 }
1429                 $count++;
1430             } while ($ret != 0 && $count < 10);
1431             if ($count == 10) {
1432                 print "WINBINDD not reachable after 20 seconds\n";
1433                 teardown_env($self, $envvars);
1434                 return 0;
1435             }
1436         }
1437
1438         print $self->getlog_env($envvars);
1439
1440         return 1;
1441 }
1442
1443 1;