docs-xml/Samba3-HOWTO/TOSHARG-WindowsClientConfig.xml

   1 <?xml version="1.0" encoding="iso-8859-1"?>
   2 <!DOCTYPE chapter PUBLIC "-//Samba-Team//DTD DocBook V4.2-Based Variant V1.0//EN" "http://www.samba.org/samba/DTD/samba-doc">
   3 <chapter id="ClientConfig">
   4 <chapterinfo>
   5         &author.jht;
   6 </chapterinfo>
   7
   8 <title>MS Windows Network Configuration Guide</title>
   9
  10 <sect1>
  11 <title>Features and Benefits</title>
  12
  13 <para>
  14 <indexterm><primary>network difficulty</primary></indexterm>
  15 <indexterm><primary>network client</primary></indexterm>
  16 <indexterm><primary>client instructions</primary></indexterm>
  17 Occasionally network administrators report difficulty getting Microsoft Windows clients to interoperate
  18 correctly with Samba servers. It seems that some folks just cannot accept the fact that the right way
  19 to configure an MS Windows network client is precisely as one would do when using MS Windows NT4 or 200x
  20 servers. Yet there is repetitious need to provide detailed Windows client configuration instructions.
  21 </para>
  22
  23 <para>
  24 <indexterm><primary>graphically illustrated client configuration</primary></indexterm>
  25 <indexterm><primary>critical aspects of configuration</primary></indexterm>
  26 The purpose of this chapter is to graphically illustrate MS Windows client configuration for the most common
  27 critical aspects of such configuration. An experienced network administrator will not be interested in the
  28 details of this chapter.
  29 </para>
  30
  31 </sect1>
  32
  33 <sect1>
  34 <title>Technical Details</title>
  35
  36 <para>
  37 <indexterm><primary>TCP/IP protocol configuration</primary></indexterm>
  38 <indexterm><primary>network membership</primary></indexterm>
  39 This chapter discusses TCP/IP protocol configuration as well as network membership for the platforms
  40 that are in common use today. These are:
  41 </para>
  42
  43 <itemizedlist>
  44         <listitem><para>
  45         Microsoft Windows XP Professional
  46         </para></listitem>
  47         <listitem><para>
  48         Windows 2000 Professional
  49         </para></listitem>
  50         <listitem><para>
  51         Windows Millennium edition (Me)
  52         </para></listitem>
  53 </itemizedlist>
  54
  55         <sect2>
  56         <title>TCP/IP Configuration</title>
  57
  58         <para>
  59 <indexterm><primary>network configuration problems</primary></indexterm>
  60 <indexterm><primary>plague network users</primary></indexterm>
  61         The builder of a house must ensure that all construction takes place on a firm foundation.
  62         The same is true for the builder of a TCP/IP-based networking system. Fundamental network configuration problems
  63         will plague all network users until they are resolved.
  64         </para>
  65
  66         <para>
  67 <indexterm><primary>fixed IP addresses</primary></indexterm>
  68 <indexterm><primary>DHCP</primary></indexterm>
  69         MS Windows workstations and servers can be configured either with fixed
  70         IP addresses or via DHCP. The examples that follow demonstrate the use of DHCP
  71         and make only passing reference to those situations where fixed IP configuration
  72         settings can be effected.
  73         </para>
  74
  75         <para>
  76 <indexterm><primary>shortcuts</primary></indexterm>
  77 <indexterm><primary>abbreviated keystrokes</primary></indexterm>
  78         It is possible to use shortcuts or abbreviated keystrokes to arrive at a
  79         particular configuration screen. The decision was made to base all examples in this
  80         chapter on use of the <guibutton>Start</guibutton> button.
  81         </para>
  82
  83                 <sect3>
  84                 <title>MS Windows XP Professional</title>
  85
  86                 <para>
  87 <indexterm><primary>Windows XP TCP/IP</primary></indexterm>
  88                 There are two paths to the Windows XP TCP/IP configuration panel. Choose the access method that you prefer:
  89                 </para>
  90
  91                 <para>
  92                 Click <guimenu>Start -> Control Panel -> Network Connections</guimenu>.
  93                 </para>
  94
  95                 <para>
  96                 <emphasis>Alternately,</emphasis> click <guimenu>Start -></guimenu>, and right-click <guimenu>My Network Places</guimenu>
  97                 then select <guimenuitem>Properties</guimenuitem>.
  98                 </para>
  99
 100                 <para>
 101 <indexterm><primary>Windows XP Professional</primary></indexterm>
 102                 The following procedure steps through the Windows XP Professional TCP/IP configuration process:
 103                 </para>
 104
 105                 <procedure>
 106                         <step><para>
 107 <indexterm><primary>Local Area Connection</primary></indexterm>
 108 <indexterm><primary>Network Bridge</primary></indexterm>
 109 <indexterm><primary>interface</primary></indexterm>
 110                         On some installations the interface will be called <guimenu>Local Area Connection</guimenu> and
 111                         on others it will be called <guimenu>Network Bridge</guimenu>. On our system it is called <guimenu>Network Bridge</guimenu>.
 112                         Right-click on <guimenu>Network Bridge -> Properties</guimenu>. See <link linkend="WXPP002"/>.
 113                         <figure id="WXPP002"><title>Network Bridge Configuration.</title><imagefile>WXPP002</imagefile></figure>
 114                         </para>
 115                         </step>
 116
 117                         <step><para>
 118 <indexterm><primary>TCP/IP protocol settings</primary></indexterm>
 119 <indexterm><primary>Network Bridge Configuration</primary></indexterm>
 120                         The Network Bridge Configuration, or Local Area Connection, panel is used to set TCP/IP protocol settings.
 121                         In <guimenuitem>This connection uses the following items:</guimenuitem> box,
 122                         click on <guimenu>Internet Protocol (TCP/IP)</guimenu>, then click on <guibutton>Properties</guibutton>.
 123                         </para>
 124
 125                         <para>
 126 <indexterm><primary>DHCP-enabled operation</primary></indexterm>
 127 <indexterm><primary>IP address automatically</primary></indexterm>
 128                         The default setting is DHCP-enabled operation
 129                         (i.e., <quote>Obtain an IP address automatically</quote>). See <link linkend="WXPP003"/>.
 130                         <figure id="WXPP003">
 131                                 <title>Internet Protocol (TCP/IP) Properties.</title>
 132                                 <imagefile>WXPP003</imagefile>
 133                         </figure>
 134                         </para>
 135
 136                         <para>
 137 <indexterm><primary>DHCP</primary></indexterm>
 138 <indexterm><primary>TCP/IP</primary></indexterm>
 139 <indexterm><primary>DNS</primary></indexterm>
 140 <indexterm><primary>ISC DHCP server</primary></indexterm>
 141                         Many network administrators will want to use DHCP to configure all client TCP/IP
 142                         protocol stack settings. (For information on how to configure the ISC DHCP server
 143                         for Windows client support see <link linkend="DHCP">the DNS and DHCP Configuration Guide</link>,
 144                         <link linkend="DHCP">DHCP Server</link>).
 145                         </para>
 146
 147                         <para>
 148 <indexterm><primary>fixed IP address</primary></indexterm>
 149 <indexterm><primary>subnet mask</primary></indexterm>
 150 <indexterm><primary>gateway address</primary></indexterm>
 151                         If it is necessary to provide a fixed IP address, click on <quote>Use the following IP address</quote> and enter the
 152                         IP Address, the subnet mask, and the default gateway address in the boxes provided.
 153                         </para></step>
 154
 155                         <step><para>
 156 <indexterm><primary>Advanced TCP/IP configuration</primary></indexterm>
 157 <indexterm><primary>TCP/IP configuration</primary></indexterm>
 158 <indexterm><primary>IP aliases</primary></indexterm>
 159 <indexterm><primary>default gateways</primary></indexterm>
 160                         Click the <guibutton>Advanced</guibutton> button to proceed with TCP/IP configuration.
 161                         This opens a panel in which it is possible to create additional IP addresses for this interface.
 162                         The technical name for the additional addresses is <emphasis>IP aliases</emphasis>, and additionally this
 163                         panel permits the setting of more default gateways (routers). In most cases where DHCP is used, it will not be
 164                         necessary to create additional settings. See <link linkend="WXPP005"></link> to see the appearance of this panel.
 165                         <figure id="WXPP005"><title>Advanced Network Settings</title><imagefile>WXPP005</imagefile></figure>
 166                         </para>
 167
 168                         <para>
 169 <indexterm><primary>DNS</primary></indexterm>
 170 <indexterm><primary>WINS</primary></indexterm>
 171 <indexterm><primary>DHCP</primary></indexterm>
 172                         Fixed settings may be required for DNS and WINS if these settings are not provided automatically via DHCP.
 173                         </para></step>
 174
 175                         <step><para>
 176 <indexterm><primary>DNS server settings</primary></indexterm>
 177 <indexterm><primary>manually configured DNS settings</primary></indexterm>
 178                         Click the <guimenu>DNS</guimenu> tab to add DNS server settings.
 179                         The example system uses manually configured DNS settings. When finished making changes, click the
 180                         <guibutton>OK</guibutton> to commit the settings. See <link linkend="WXPP014"/>.
 181                         <figure id="WXPP014"> <title>DNS Configuration.</title> <imagefile>WXPP014</imagefile> </figure>
 182                         </para></step>
 183
 184                         <step><para>
 185 <indexterm><primary>WINS</primary></indexterm>
 186 <indexterm><primary>manual WINS server entries</primary></indexterm>
 187                         Click the <guibutton>WINS</guibutton> tab to add manual WINS server entries.
 188                         This step demonstrates an example system that uses manually configured WINS settings.
 189                         When finished making changes, click <guibutton>OK</guibutton> to commit
 190                         the settings. See <link linkend="WXPP009"></link>.
 191                         <figure id="WXPP009"><title>WINS Configuration</title><imagefile>WXPP009</imagefile></figure>
 192                         </para></step>
 193                 </procedure>
 194
 195                 </sect3>
 196
 197                 <sect3>
 198                 <title>MS Windows 2000</title>
 199
 200                 <para>
 201 <indexterm><primary>Windows 2000 Professional TCP/IP</primary></indexterm>
 202 <indexterm><primary>TCP/IP configuration panel</primary></indexterm>
 203                 There are two paths to the Windows 2000 Professional TCP/IP configuration panel. Choose the access method that you prefer:
 204                 </para>
 205
 206                 <para>
 207                 Click <guimenu>Start -> Control Panel -> Network and Dial-up Connections</guimenu>.
 208                 </para>
 209
 210                 <para>
 211                 <emphasis>Alternatively,</emphasis> click <guimenu>Start</guimenu>, then right-click <guimenu>My Network Places</guimenu>, and
 212                 select <guimenuitem>Properties</guimenuitem>.
 213                 </para>
 214
 215                 <para>
 216 <indexterm><primary>Windows XP Professional TCP/IP</primary></indexterm>
 217                 The following procedure steps through the Windows XP Professional TCP/IP configuration process:
 218                 </para>
 219
 220                 <procedure>
 221                         <step><para>
 222                         Right-click on <guimenu>Local Area Connection</guimenu>, then click
 223                         <guimenuitem>Properties</guimenuitem>. See <link linkend="w2kp001"></link>.
 224                         <figure id="w2kp001"><title>Local Area Connection Properties.</title><imagefile>w2kp001</imagefile></figure>
 225                         </para></step>
 226
 227                         <step><para>
 228 <indexterm><primary>Local Area Connection Properties</primary></indexterm>
 229 <indexterm><primary>TCP/IP protocol settings</primary></indexterm>
 230                         The Local Area Connection Properties is used to set TCP/IP protocol settings. Click on
 231                         <guimenu>Internet Protocol (TCP/IP)</guimenu> in the <guimenuitem>Components checked are used by this
 232                         connection:</guimenuitem> box, then click the <guibutton>Properties</guibutton> button.
 233                         </para></step>
 234
 235                         <step><para>
 236 <indexterm><primary>DHCP-enabled</primary></indexterm>
 237 <indexterm><primary>IP address automatically</primary></indexterm>
 238                         The default setting is DHCP-enabled operation
 239                         (i.e., <quote>Obtain an IP address automatically</quote>). See <link linkend="w2kp002"/>.
 240                         <figure id="w2kp002"><title>Internet Protocol (TCP/IP) Properties.</title><imagefile>w2kp002</imagefile></figure>
 241                         </para>
 242
 243                         <para>
 244 <indexterm><primary>DHCP</primary></indexterm>
 245 <indexterm><primary>protocol stack settings</primary></indexterm>
 246                         Many network administrators will want to use DHCP to configure all client TCP/IP
 247                         protocol stack settings. (For information on how to configure the ISC DHCP server
 248                         for Windows client support, see, <link linkend="DHCP"></link>).
 249                         </para>
 250
 251                         <para>
 252 <indexterm><primary>fixed IP address</primary></indexterm>
 253 <indexterm><primary>network clients</primary></indexterm>
 254                         If it is necessary to provide a fixed IP address, click on <quote>Use the following IP address</quote> and enter the
 255                         IP Address, the subnet mask, and the default gateway address in the boxes provided.
 256                         For this example we are assuming that all network clients will be configured using DHCP.
 257                         </para></step>
 258
 259                         <step><para>
 260                         Click the <guimenu>Advanced</guimenu> button to proceed with TCP/IP configuration.
 261                         Refer to <link linkend="w2kp003"></link>.
 262                         <figure id="w2kp003"><title>Advanced Network Settings.</title><imagefile>w2kp003</imagefile></figure>
 263                         </para>
 264
 265                         <para>
 266 <indexterm><primary>DNS</primary></indexterm>
 267 <indexterm><primary>WINS</primary></indexterm>
 268 <indexterm><primary>DHCP</primary></indexterm>
 269                         Fixed settings may be required for DNS and WINS if these settings are not provided automatically via DHCP.
 270                         </para></step>
 271
 272                         <step><para>
 273 <indexterm><primary>DNS server settings</primary></indexterm>
 274 <indexterm><primary>commit the settings</primary></indexterm>
 275                         Click the <guimenu>DNS</guimenu> tab to add DNS server settings.
 276                         The example system uses manually configured DNS settings. When finished making changes,
 277                         click <guibutton>OK</guibutton> to commit the settings. See <link linkend="w2kp004"></link>.
 278                         <figure id="w2kp004"><title>DNS Configuration.</title><imagefile>w2kp004</imagefile></figure>
 279                         </para></step>
 280
 281                         <step><para>
 282 <indexterm><primary>manual WINS server entries</primary></indexterm>
 283 <indexterm><primary>WINS</primary></indexterm>
 284                         Click the <guibutton>WINS</guibutton> tab to add manual WINS server entries.
 285                         This step demonstrates an example system that uses manually configured WINS settings.
 286                         When finished making changes, click <guibutton>OK</guibutton> to commit the settings.
 287                         See <link linkend="w2kp005"></link>.
 288                         <figure id="w2kp005">
 289                                 <title>WINS Configuration.</title><imagefile>w2kp005</imagefile>
 290                         </figure>
 291                         </para></step>
 292
 293                 </procedure>
 294
 295                 </sect3>
 296
 297                 <sect3>
 298                 <title>MS Windows Me</title>
 299
 300                 <para>
 301 <indexterm><primary>Windows Millennium edition (Me) TCP/IP</primary></indexterm>
 302 <indexterm><primary>Windows Millennium</primary></indexterm>
 303 <indexterm><primary>TCP/IP configuration</primary></indexterm>
 304                 There are two paths to the Windows Millennium edition (Me) TCP/IP configuration panel. Choose the access method that you prefer:
 305                 </para>
 306
 307                 <para>
 308                 Click <guimenu>Start -> Control Panel -> Network Connections</guimenu>.
 309                 </para>
 310
 311                 <para>
 312 <indexterm><primary>My Network Places</primary></indexterm>
 313 <indexterm><primary>Properties</primary></indexterm>
 314                 <emphasis>Alternatively,</emphasis> click on <guimenu>Start -></guimenu>, and right click on <guimenu>My Network Places</guimenu>
 315                 then select <guimenuitem>Properties</guimenuitem>.
 316                 </para>
 317
 318                 <para>
 319 <indexterm><primary>Windows Me TCP/IP</primary></indexterm>
 320                 The following procedure steps through the Windows Me TCP/IP configuration process:
 321                 </para>
 322
 323                 <procedure>
 324                         <step><para>
 325 <indexterm><primary>Internet Protocol TCP/IP</primary></indexterm>
 326                         In the box labeled <guimenuitem>The following network components are installed:</guimenuitem>,
 327                         click on <guimenu>Internet Protocol TCP/IP</guimenu>, then click on the <guibutton>Properties</guibutton> button.
 328                         See <link linkend="WME001"></link>.
 329                         <figure id="WME001">
 330                                 <title>The Windows Me Network Configuration Panel.</title>
 331                                 <imagefile>WME001</imagefile>
 332                         </figure>
 333                         </para></step>
 334
 335                         <step><para>
 336 <indexterm><primary>DHCP</primary></indexterm>
 337 <indexterm><primary>TCP/IP</primary></indexterm>
 338 <indexterm><primary>ISC DHCP server</primary></indexterm>
 339                         Many network administrators will want to use DHCP to configure all client TCP/IP
 340                         protocol stack settings. (For information on how to configure the ISC DHCP server
 341                         for Windows client support see <link linkend="DHCP">the DNS and DHCP Configuration Guide</link>,
 342                         <link linkend="DHCP">DHCP Server</link>). The default setting on Windows Me workstations is for DHCP-enabled operation
 343                         (i.e., <guimenu>Obtain IP address automatically</guimenu> is enabled). See <link linkend="WME002"></link>.
 344                         <figure id="WME002"><title>IP Address.</title><imagefile>WME002</imagefile></figure>
 345                         </para>
 346
 347                         <para>
 348 <indexterm><primary>Specify an IP address</primary></indexterm>
 349 <indexterm><primary>subnet mask</primary></indexterm>
 350 <indexterm><primary>DHCP</primary></indexterm>
 351                         If it is necessary to provide a fixed IP address, click on <guimenuitem>Specify an IP address</guimenuitem> and enter the
 352                         IP Address and the subnet mask in the boxes provided. For this example we are assuming that all
 353                         network clients will be configured using DHCP.
 354                         </para></step>
 355
 356                         <step><para>
 357 <indexterm><primary>DNS</primary></indexterm>
 358 <indexterm><primary>WINS</primary></indexterm>
 359                         Fixed settings may be required for DNS and WINS if these settings are not provided automatically via DHCP.
 360                         </para></step>
 361
 362                         <step><para>
 363 <indexterm><primary>WINS server settings</primary></indexterm>
 364                         If necessary, click the <guimenu>DNS Configuration</guimenu> tab to add DNS server settings.
 365                         Click the <guibutton>WINS Configuration</guibutton> tab to add WINS server settings.
 366                         The <guimenu>Gateway</guimenu> tab allows additional gateways (router addresses) to be added to the network
 367                         interface settings. In most cases where DHCP is used, it will not be necessary to
 368                         create these manual settings.
 369                         </para></step>
 370
 371                         <step><para>
 372 <indexterm><primary>WINS</primary></indexterm>
 373 <indexterm><primary>manually configured</primary></indexterm>
 374                         The following example uses manually configured WINS settings. See <link linkend="WME005"></link>.
 375                         When finished making changes, click <guibutton>OK</guibutton> to commit the settings.
 376                         <figure id="WME005"><title>DNS Configuration.</title><imagefile>WME005</imagefile></figure>
 377                         </para>
 378
 379                         <para>
 380 <indexterm><primary>single DHCP server</primary></indexterm>
 381 <indexterm><primary>multiple Windows workgroups or domains</primary></indexterm>
 382                         This is an example of a system that uses manually configured WINS settings. One situation where
 383                         this might apply is on a network that has a single DHCP server that provides settings for multiple
 384                         Windows workgroups or domains. See <link linkend="WME003"></link>.
 385                         <figure id="WME003"><title>WINS Configuration.</title><imagefile>WME003</imagefile></figure>
 386                         </para></step>
 387                 </procedure>
 388
 389
 390                 </sect3>
 391
 392         </sect2>
 393
 394         <sect2>
 395         <title>Joining a Domain: Windows 2000/XP Professional</title>
 396
 397         <para>
 398 <indexterm><primary>Windows NT/200x/XP Professional</primary></indexterm>
 399 <indexterm><primary>domain security</primary></indexterm>
 400 <indexterm><primary>domain member</primary></indexterm>
 401 <indexterm><primary>domain joining</primary></indexterm>
 402         Microsoft Windows NT/200x/XP Professional platforms can participate in domain security.
 403         This section steps through the process for making a Windows 200x/XP Professional machine a
 404         member of a domain security environment. It should be noted that this process is identical
 405         when joining a domain that is controlled by Windows NT4/200x as well as a Samba PDC.
 406         </para>
 407
 408         <procedure>
 409                 <step><para>
 410                 Click <guimenu>Start</guimenu>.
 411                 </para></step>
 412
 413                 <step><para>
 414                 Right-click <guimenu>My Computer</guimenu>, then select <guimenuitem>Properties</guimenuitem>.
 415                 </para></step>
 416
 417                 <step><para>
 418 <indexterm><primary>Control Panel</primary></indexterm>
 419                 The opening panel is the same one that can be reached by clicking <guimenu>System</guimenu> on the Control Panel.
 420                 See <link linkend="wxpp001"></link>.
 421                 <figure id="wxpp001"><title>The General Panel.</title><imagefile>wxpp001</imagefile></figure>
 422                 </para></step>
 423
 424                 <step><para>
 425 <indexterm><primary>Computer Name</primary></indexterm>
 426                 Click the <guimenu>Computer Name</guimenu> tab.
 427                 This panel shows the <guimenuitem>Computer Description</guimenuitem>, the <guimenuitem>Full computer name</guimenuitem>,
 428                 and the <guimenuitem>Workgroup</guimenuitem> or <guimenuitem>Domain name</guimenuitem>.
 429                 </para>
 430
 431                 <para>
 432 <indexterm><primary>Network ID</primary></indexterm>
 433 <indexterm><primary>configuration wizard</primary></indexterm>
 434                 Clicking the <guimenu>Network ID</guimenu> button will launch the configuration wizard. Do not use this with
 435                 Samba-3. If you wish to change the computer name or join or leave the domain, click the <guimenu>Change</guimenu> button.
 436                 See <link linkend="wxpp004"></link>.
 437                 <figure id="wxpp004"><title>The Computer Name Panel.</title><imagefile>wxpp004</imagefile></figure>
 438                 </para></step>
 439
 440                 <step><para>
 441                 Click on <guimenu>Change</guimenu>. This panel shows that our example machine (TEMPTATION) is in a workgroup called WORKGROUP.
 442                 We will join the domain called MIDEARTH. See <link linkend="wxpp006"></link>.
 443                 <figure id="wxpp006"><title>The Computer Name Changes Panel.</title><imagefile>wxpp006</imagefile></figure>
 444         </para></step>
 445
 446                 <step><para>
 447 <indexterm><primary>domain radio button</primary></indexterm>
 448                 Enter the name <guimenu>MIDEARTH</guimenu> in the field below the domain radio button.
 449                 </para>
 450
 451         <para>
 452                 This panel shows that our example machine (TEMPTATION) is set to join the domain called MIDEARTH. See <link linkend="wxpp007"></link>.
 453                 <figure id="wxpp007"><title>The Computer Name Changes Panel &smbmdash; Domain MIDEARTH.</title><imagefile>wxpp007</imagefile></figure>
 454         </para></step>
 455
 456                 <step><para>
 457 <indexterm><primary>credentials</primary></indexterm>
 458 <indexterm><primary>username and password</primary></indexterm>
 459                 Now click the <guimenu>OK</guimenu> button. A dialog box should appear to allow you to provide the
 460                 credentials (username and password) of a domain administrative account that has the rights to add machines to
 461                 the domain.
 462                 </para>
 463
 464         <para>
 465 <indexterm><primary>root</primary></indexterm>
 466                 Enter the name <quote>root</quote> and the root password from your Samba-3 server. See <link linkend="wxpp008"></link>.
 467                 <figure id="wxpp008">
 468                         <title>Computer Name Changes &smbmdash; Username and Password Panel.</title><imagefile>wxpp008</imagefile>
 469                 </figure>
 470         </para></step>
 471
 472                 <step><para>
 473                 Click on <guimenu>OK</guimenu>.
 474         </para>
 475
 476                 <para>
 477 <indexterm><primary>Welcome</primary></indexterm>
 478 <indexterm><primary>rebooted</primary></indexterm>
 479                 The <quote>Welcome to the MIDEARTH domain.</quote> dialog box should appear. At this point the machine must be rebooted.
 480                 Joining the domain is now complete.
 481         </para></step>
 482
 483         </procedure>
 484
 485         </sect2>
 486
 487         <sect2>
 488         <title>Domain Logon Configuration: Windows 9x/Me</title>
 489
 490         <para>
 491 <indexterm><primary>Windows 9x/Me</primary></indexterm>
 492 <indexterm><primary>domain logon</primary></indexterm>
 493 <indexterm><primary>LanManager</primary></indexterm>
 494         We follow the convention used by most in saying that Windows 9x/Me machines can participate in domain logons. The truth is
 495         that these platforms can use only the LanManager network logon protocols.
 496         </para>
 497
 498         <note><para>
 499 <indexterm><primary>Windows XP Home edition</primary></indexterm>
 500 <indexterm><primary>LanManager</primary></indexterm>
 501 <indexterm><primary>network logon</primary></indexterm>
 502         Windows XP Home edition cannot participate in domain or LanManager network logons.
 503         </para></note>
 504
 505         <procedure>
 506                 <step><para>
 507                 Right-click on the <guimenu>Network Neighborhood</guimenu> icon.
 508                 </para></step>
 509
 510                 <step><para>
 511                 The Network Configuration Panel allows all common network settings to be changed.
 512                 See <link linkend="WME009"></link>.
 513                 <figure id="WME009"><title>The Network Panel.</title><imagefile>WME009</imagefile></figure>
 514                 </para>
 515
 516                 <para>
 517 <indexterm><primary>Client for Microsoft Networks</primary></indexterm>
 518 <indexterm><primary>Properties</primary></indexterm>
 519                 Make sure that the <guimenu>Client for Microsoft Networks</guimenu> driver is installed as shown.
 520                 Click on the <guimenu>Client for Microsoft Networks</guimenu> entry in <guimenu>The following network
 521                 components are installed:</guimenu> box. Then click the <guibutton>Properties</guibutton> button.
 522                 </para></step>
 523
 524                 <step><para>
 525 <indexterm><primary>Networks Properties</primary></indexterm>
 526 <indexterm><primary>network logon</primary></indexterm>
 527                 The Client for Microsoft Networks Properties panel is the correct location to configure network logon
 528                 settings. See <link linkend="WME010"></link>.
 529                 <figure id="WME010"><title>Client for Microsoft Networks Properties Panel.</title><imagefile>WME010</imagefile></figure>
 530                 </para>
 531
 532                 <para>
 533 <indexterm><primary>Windows NT domain name</primary></indexterm>
 534 <indexterm><primary>domain name</primary></indexterm>
 535                 Enter the Windows NT domain name, check the <guimenu>Log on to Windows NT domain</guimenu> box,
 536                 and click <guimenu>OK</guimenu>.
 537                 </para></step>
 538
 539                 <step><para>
 540 <indexterm><primary>Identification</primary></indexterm>
 541 <indexterm><primary>workgroup</primary></indexterm>
 542 <indexterm><primary>computer name</primary></indexterm>
 543                 Click on the <guimenu>Identification</guimenu> button. This is the location at which the workgroup
 544                 (domain) name and the machine name (computer name) need to be set. See <link linkend="WME013"></link>.
 545                 <figure id="WME013"><title>Identification Panel.</title><imagefile>WME013</imagefile></figure>
 546                 </para></step>
 547
 548                 <step><para>
 549 <indexterm><primary>Access Control</primary></indexterm>
 550 <indexterm><primary>group accounts</primary></indexterm>
 551 <indexterm><primary>domain user</primary></indexterm>
 552 <indexterm><primary>User-level access control</primary></indexterm>
 553                 Now click the <guimenu>Access Control</guimenu> button. If you want to be able to assign share access
 554                 permissions using domain user and group accounts, it is necessary to enable
 555                 <guimenu>User-level access control</guimenu> as shown in this panel.  See <link linkend="WME014"></link>.
 556                 <figure id="WME014"><title>Access Control Panel.</title><imagefile>WME014</imagefile></figure>
 557                 </para></step>
 558
 559         </procedure>
 560
 561         </sect2>
 562
 563 </sect1>
 564
 565 <sect1>
 566 <title>Common Errors</title>
 567
 568 <para>
 569 <indexterm><primary>networking systems</primary></indexterm>
 570 <indexterm><primary>errors that can afflict</primary></indexterm>
 571 The most common errors that can afflict Windows networking systems include:
 572 </para>
 573
 574 <itemizedlist>
 575         <listitem><para>Incorrect IP address.</para></listitem>
 576         <listitem><para>Incorrect or inconsistent netmasks.</para></listitem>
 577         <listitem><para>Incorrect router address.</para></listitem>
 578         <listitem><para>Incorrect DNS server address.</para></listitem>
 579         <listitem><para>Incorrect WINS server address.</para></listitem>
 580         <listitem><para>Use of a Network Scope setting &smbmdash; watch out for this one!</para></listitem>
 581 </itemizedlist>
 582
 583 <para>
 584 <indexterm><primary>Windows NT/200x/XP Professional</primary></indexterm>
 585 <indexterm><primary>cannot join domain</primary></indexterm>
 586 The most common reasons for which a Windows NT/200x/XP Professional client cannot join the Samba controlled domain are:
 587 </para>
 588
 589 <itemizedlist>
 590         <listitem><para>&smb.conf; does not have correct <smbconfoption name="add machine script"/> settings.</para></listitem>
 591         <listitem><para><quote>root</quote> account is not in password backend database.</para></listitem>
 592         <listitem><para>Attempt to use a user account instead of the <quote>root</quote> account to join a machine to the domain.</para></listitem>
 593         <listitem><para>Open connections from the workstation to the server.</para></listitem>
 594         <listitem><para>Firewall or filter configurations in place on either the client or the Samba server.</para></listitem>
 595 </itemizedlist>
 596
 597 </sect1>
 598
 599 </chapter>