selftest/target/Samba3.pm

   1 #!/usr/bin/perl
   2 # Bootstrap Samba and run a number of tests against it.
   3 # Copyright (C) 2005-2007 Jelmer Vernooij <jelmer@samba.org>
   4 # Published under the GNU GPL, v3 or later.
   5
   6 # NOTE: Refer to the README for more details about the various testenvs,
   7 # and tips about adding new testenvs.
   8
   9 package Samba3;
  10
  11 use strict;
  12 use Cwd qw(abs_path);
  13 use FindBin qw($RealBin);
  14 use POSIX;
  15 use target::Samba;
  16 use File::Path 'remove_tree';
  17
  18 sub have_ads($) {
  19         my ($self) = @_;
  20         my $found_ads = 0;
  21         my $smbd_build_options = Samba::bindir_path($self, "smbd") . " -b|";
  22         open(IN, $smbd_build_options) or die("Unable to run $smbd_build_options: $!");
  23
  24         while (<IN>) {
  25                 if (/WITH_ADS/) {
  26                        $found_ads = 1;
  27                 }
  28         }
  29         close IN;
  30
  31         # If we were not built with ADS support, pretend we were never even available
  32         print "smbd does not have ADS support\n" unless $found_ads;
  33         return $found_ads;
  34 }
  35
  36 # return smb.conf parameters applicable to @path, based on the underlying
  37 # filesystem type
  38 sub get_fs_specific_conf($$)
  39 {
  40         my ($self, $path) = @_;
  41         my $mods = "";
  42         my $stat_out = `stat --file-system $path` or return "";
  43
  44         if ($stat_out =~ m/Type:\s+btrfs/) {
  45                 $mods .= "streams_xattr btrfs";
  46         }
  47
  48         if ($mods) {
  49                 return "vfs objects = $mods";
  50         }
  51
  52         return undef;
  53 }
  54
  55 sub new($$) {
  56         my ($classname, $bindir, $srcdir, $server_maxtime) = @_;
  57         my $self = { vars => {},
  58                      bindir => $bindir,
  59                      srcdir => $srcdir,
  60                      server_maxtime => $server_maxtime
  61         };
  62         bless $self;
  63         return $self;
  64 }
  65
  66 sub teardown_env($$)
  67 {
  68         my ($self, $envvars) = @_;
  69         my $count = 0;
  70
  71         # This should cause smbd to terminate gracefully
  72         close($envvars->{STDIN_PIPE});
  73
  74         my $smbdpid = $envvars->{SMBD_TL_PID};
  75         my $nmbdpid = $envvars->{NMBD_TL_PID};
  76         my $winbinddpid = $envvars->{WINBINDD_TL_PID};
  77
  78         # This should give it time to write out the gcov data
  79         until ($count > 20) {
  80             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  81             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
  82             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
  83             if ($smbdchild == -1
  84                 && $nmbdchild == -1
  85                 && $winbinddchild == -1) {
  86                 last;
  87             }
  88             sleep(1);
  89             $count++;
  90         }
  91
  92         if ($count <= 20 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
  93             return;
  94         }
  95
  96         $self->stop_sig_term($smbdpid);
  97         $self->stop_sig_term($nmbdpid);
  98         $self->stop_sig_term($winbinddpid);
  99
 100         $count = 0;
 101         until ($count > 10) {
 102             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
 103             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
 104             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
 105             if ($smbdchild == -1
 106                 && $nmbdchild == -1
 107                 && $winbinddchild == -1) {
 108                 last;
 109             }
 110             sleep(1);
 111             $count++;
 112         }
 113
 114         if ($count <= 10 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
 115             return;
 116         }
 117
 118         warn("timelimit process did not quit on SIGTERM, sending SIGKILL");
 119         $self->stop_sig_kill($smbdpid);
 120         $self->stop_sig_kill($nmbdpid);
 121         $self->stop_sig_kill($winbinddpid);
 122
 123         return 0;
 124 }
 125
 126 sub getlog_env_app($$$)
 127 {
 128         my ($self, $envvars, $name) = @_;
 129
 130         my $title = "$name LOG of: $envvars->{NETBIOSNAME}\n";
 131         my $out = $title;
 132
 133         open(LOG, "<".$envvars->{$name."_TEST_LOG"});
 134
 135         seek(LOG, $envvars->{$name."_TEST_LOG_POS"}, SEEK_SET);
 136         while (<LOG>) {
 137                 $out .= $_;
 138         }
 139         $envvars->{$name."_TEST_LOG_POS"} = tell(LOG);
 140         close(LOG);
 141
 142         return "" if $out eq $title;
 143
 144         return $out;
 145 }
 146
 147 sub getlog_env($$)
 148 {
 149         my ($self, $envvars) = @_;
 150         my $ret = "";
 151
 152         $ret .= $self->getlog_env_app($envvars, "SMBD");
 153         $ret .= $self->getlog_env_app($envvars, "NMBD");
 154         $ret .= $self->getlog_env_app($envvars, "WINBINDD");
 155
 156         return $ret;
 157 }
 158
 159 sub check_env($$)
 160 {
 161         my ($self, $envvars) = @_;
 162
 163         my $childpid = waitpid(-1, WNOHANG);
 164
 165         # TODO ...
 166         return 1;
 167 }
 168
 169 # Declare the environments Samba3 makes available.
 170 # To be set up, they will be called as
 171 #   samba3->setup_$envname($self, $path, $dep_1_vars, $dep_2_vars, ...)
 172 %Samba3::ENV_DEPS = (
 173         # name              => [dep_1, dep_2, ...],
 174         nt4_dc              => [],
 175         nt4_dc_schannel     => [],
 176
 177         simpleserver        => [],
 178         fileserver          => [],
 179         maptoguest          => [],
 180         ktest               => [],
 181
 182         nt4_member          => ["nt4_dc"],
 183
 184         ad_member           => ["ad_dc"],
 185         ad_member_rfc2307   => ["ad_dc_ntvfs"],
 186         ad_member_idmap_rid => ["ad_dc"],
 187         ad_member_idmap_ad  => ["ad_dc"],
 188 );
 189
 190 sub setup_nt4_dc
 191 {
 192         my ($self, $path) = @_;
 193
 194         print "PROVISIONING NT4 DC...";
 195
 196         my $nt4_dc_options = "
 197         domain master = yes
 198         domain logons = yes
 199         lanman auth = yes
 200         ntlm auth = yes
 201         raw NTLMv2 auth = yes
 202         server schannel = auto
 203
 204         rpc_server:epmapper = external
 205         rpc_server:spoolss = external
 206         rpc_server:lsarpc = external
 207         rpc_server:samr = external
 208         rpc_server:netlogon = external
 209         rpc_server:register_embedded_np = yes
 210         rpc_server:FssagentRpc = external
 211
 212         rpc_daemon:epmd = fork
 213         rpc_daemon:spoolssd = fork
 214         rpc_daemon:lsasd = fork
 215         rpc_daemon:fssd = fork
 216         fss: sequence timeout = 1
 217         check parent directory delete on close = yes
 218 ";
 219
 220         my $vars = $self->provision($path, "SAMBA-TEST",
 221                                     "LOCALNT4DC2",
 222                                     "localntdc2pass",
 223                                     $nt4_dc_options);
 224
 225         $vars or return undef;
 226
 227         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 228                return undef;
 229         }
 230
 231         $vars->{DOMSID} = $vars->{SAMSID};
 232         $vars->{DC_SERVER} = $vars->{SERVER};
 233         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 234         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 235         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 236         $vars->{DC_USERNAME} = $vars->{USERNAME};
 237         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 238
 239         return $vars;
 240 }
 241
 242 sub setup_nt4_dc_schannel
 243 {
 244         my ($self, $path) = @_;
 245
 246         print "PROVISIONING NT4 DC WITH SERVER SCHANNEL ...";
 247
 248         my $pdc_options = "
 249         domain master = yes
 250         domain logons = yes
 251         lanman auth = yes
 252
 253         rpc_server:epmapper = external
 254         rpc_server:spoolss = external
 255         rpc_server:lsarpc = external
 256         rpc_server:samr = external
 257         rpc_server:netlogon = external
 258         rpc_server:register_embedded_np = yes
 259
 260         rpc_daemon:epmd = fork
 261         rpc_daemon:spoolssd = fork
 262         rpc_daemon:lsasd = fork
 263
 264         server schannel = yes
 265         # used to reproduce bug #12772
 266         server max protocol = SMB2_02
 267 ";
 268
 269         my $vars = $self->provision($path, "NT4SCHANNEL",
 270                                     "LOCALNT4DC9",
 271                                     "localntdc9pass",
 272                                     $pdc_options);
 273
 274         $vars or return undef;
 275
 276         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 277                return undef;
 278         }
 279
 280         $vars->{DOMSID} = $vars->{SAMSID};
 281         $vars->{DC_SERVER} = $vars->{SERVER};
 282         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 283         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 284         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 285         $vars->{DC_USERNAME} = $vars->{USERNAME};
 286         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 287
 288         return $vars;
 289 }
 290
 291 sub setup_nt4_member
 292 {
 293         my ($self, $prefix, $nt4_dc_vars) = @_;
 294         my $count = 0;
 295         my $rc;
 296
 297         print "PROVISIONING MEMBER...";
 298
 299         my $require_mutexes = "dbwrap_tdb_require_mutexes:* = yes";
 300         $require_mutexes = "" if ($ENV{SELFTEST_DONT_REQUIRE_TDB_MUTEX_SUPPORT} eq "1");
 301
 302         my $member_options = "
 303         security = domain
 304         dbwrap_tdb_mutexes:* = yes
 305         ${require_mutexes}
 306 ";
 307         my $ret = $self->provision($prefix, $nt4_dc_vars->{DOMAIN},
 308                                    "LOCALNT4MEMBER3",
 309                                    "localnt4member3pass",
 310                                    $member_options);
 311
 312         $ret or return undef;
 313
 314         my $nmblookup = Samba::bindir_path($self, "nmblookup");
 315         do {
 316                 print "Waiting for the LOGON SERVER registration ...\n";
 317                 $rc = system("$nmblookup $ret->{CONFIGURATION} $ret->{DOMAIN}\#1c");
 318                 if ($rc != 0) {
 319                         sleep(1);
 320                 }
 321                 $count++;
 322         } while ($rc != 0 && $count < 10);
 323         if ($count == 10) {
 324                 print "NMBD not reachable after 10 retries\n";
 325                 teardown_env($self, $ret);
 326                 return 0;
 327         }
 328
 329         my $net = Samba::bindir_path($self, "net");
 330         # Add hosts file for name lookups
 331         my $cmd = "NSS_WRAPPER_HOSTS='$ret->{NSS_WRAPPER_HOSTS}' ";
 332         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 333         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 334         $cmd .= "$net rpc join $ret->{CONFIGURATION} $nt4_dc_vars->{DOMAIN} member";
 335         $cmd .= " -U$nt4_dc_vars->{USERNAME}\%$nt4_dc_vars->{PASSWORD}";
 336
 337         if (system($cmd) != 0) {
 338             warn("Join failed\n$cmd");
 339             return undef;
 340         }
 341
 342         # Add hosts file for name lookups
 343         my $cmd = "NSS_WRAPPER_HOSTS='$ret->{NSS_WRAPPER_HOSTS}' ";
 344         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 345         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 346         $cmd .= "$net $ret->{CONFIGURATION} primarytrust dumpinfo | grep -q 'REDACTED SECRET VALUES'";
 347
 348         if (system($cmd) != 0) {
 349             warn("check failed\n$cmd");
 350             return undef;
 351         }
 352
 353         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 354                return undef;
 355         }
 356
 357         $ret->{DOMSID} = $nt4_dc_vars->{DOMSID};
 358         $ret->{DC_SERVER} = $nt4_dc_vars->{SERVER};
 359         $ret->{DC_SERVER_IP} = $nt4_dc_vars->{SERVER_IP};
 360         $ret->{DC_SERVER_IPV6} = $nt4_dc_vars->{SERVER_IPV6};
 361         $ret->{DC_NETBIOSNAME} = $nt4_dc_vars->{NETBIOSNAME};
 362         $ret->{DC_USERNAME} = $nt4_dc_vars->{USERNAME};
 363         $ret->{DC_PASSWORD} = $nt4_dc_vars->{PASSWORD};
 364
 365         return $ret;
 366 }
 367
 368 sub setup_ad_member
 369 {
 370         my ($self, $prefix, $dcvars) = @_;
 371
 372         my $prefix_abs = abs_path($prefix);
 373         my @dirs = ();
 374
 375         # If we didn't build with ADS, pretend this env was never available
 376         if (not $self->have_ads()) {
 377                 return "UNKNOWN";
 378         }
 379
 380         print "PROVISIONING S3 AD MEMBER...";
 381
 382         mkdir($prefix_abs, 0777);
 383
 384         my $share_dir="$prefix_abs/share";
 385         push(@dirs, $share_dir);
 386
 387         my $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}";
 388         push(@dirs, $substitution_path);
 389
 390         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/U_alice";
 391         push(@dirs, $substitution_path);
 392
 393         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/U_alice/G_domain users";
 394         push(@dirs, $substitution_path);
 395
 396         # Using '/' as the winbind separator is a bad idea ...
 397         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/u_$dcvars->{DOMAIN}";
 398         push(@dirs, $substitution_path);
 399
 400         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/u_$dcvars->{DOMAIN}/alice";
 401         push(@dirs, $substitution_path);
 402
 403         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/u_$dcvars->{DOMAIN}/alice/g_$dcvars->{DOMAIN}";
 404         push(@dirs, $substitution_path);
 405
 406         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/u_$dcvars->{DOMAIN}/alice/g_$dcvars->{DOMAIN}/domain users";
 407         push(@dirs, $substitution_path);
 408
 409         my $member_options = "
 410         security = ads
 411         workgroup = $dcvars->{DOMAIN}
 412         realm = $dcvars->{REALM}
 413         netbios aliases = foo bar
 414         template homedir = /home/%D/%G/%U
 415
 416 [sub_dug]
 417         path = $share_dir/D_%D/U_%U/G_%G
 418         writeable = yes
 419
 420 [sub_dug2]
 421         path = $share_dir/D_%D/u_%u/g_%g
 422         writeable = yes
 423
 424 ";
 425
 426         my $ret = $self->provision($prefix, $dcvars->{DOMAIN},
 427                                    "LOCALADMEMBER",
 428                                    "loCalMemberPass",
 429                                    $member_options,
 430                                    $dcvars->{SERVER_IP},
 431                                    $dcvars->{SERVER_IPV6});
 432
 433         $ret or return undef;
 434
 435         mkdir($_, 0777) foreach(@dirs);
 436
 437         close(USERMAP);
 438         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 439         $ret->{REALM} = $dcvars->{REALM};
 440         $ret->{DOMSID} = $dcvars->{DOMSID};
 441
 442         my $ctx;
 443         $ctx = {};
 444         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 445         $ctx->{domain} = $dcvars->{DOMAIN};
 446         $ctx->{realm} = $dcvars->{REALM};
 447         $ctx->{dnsname} = lc($dcvars->{REALM});
 448         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 449         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 450         $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
 451         Samba::mk_krb5_conf($ctx, "");
 452
 453         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 454
 455         my $net = Samba::bindir_path($self, "net");
 456         # Add hosts file for name lookups
 457         my $cmd = "NSS_WRAPPER_HOSTS='$ret->{NSS_WRAPPER_HOSTS}' ";
 458         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 459         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 460                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 461         } else {
 462                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 463         }
 464         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 465         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 466         $cmd .= "$net join $ret->{CONFIGURATION}";
 467         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 468
 469         if (system($cmd) != 0) {
 470             warn("Join failed\n$cmd");
 471             return undef;
 472         }
 473
 474         # We need world access to this share, as otherwise the domain
 475         # administrator from the AD domain provided by Samba4 can't
 476         # access the share for tests.
 477         chmod 0777, "$prefix/share";
 478
 479         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 480                 return undef;
 481         }
 482
 483         $ret->{DC_SERVER} = $dcvars->{SERVER};
 484         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 485         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 486         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 487         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 488         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 489
 490         return $ret;
 491 }
 492
 493 sub setup_ad_member_rfc2307
 494 {
 495         my ($self, $prefix, $dcvars) = @_;
 496
 497         # If we didn't build with ADS, pretend this env was never available
 498         if (not $self->have_ads()) {
 499                 return "UNKNOWN";
 500         }
 501
 502         print "PROVISIONING S3 AD MEMBER WITH idmap_rfc2307 config...";
 503
 504         my $member_options = "
 505         security = ads
 506         workgroup = $dcvars->{DOMAIN}
 507         realm = $dcvars->{REALM}
 508         idmap cache time = 0
 509         idmap negative cache time = 0
 510         idmap config * : backend = autorid
 511         idmap config * : range = 1000000-1999999
 512         idmap config * : rangesize = 100000
 513         idmap config $dcvars->{DOMAIN} : backend = rfc2307
 514         idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
 515         idmap config $dcvars->{DOMAIN} : ldap_server = ad
 516         idmap config $dcvars->{DOMAIN} : bind_path_user = ou=idmap,dc=samba,dc=example,dc=com
 517         idmap config $dcvars->{DOMAIN} : bind_path_group = ou=idmap,dc=samba,dc=example,dc=com
 518
 519         password server = $dcvars->{SERVER}
 520 ";
 521
 522         my $ret = $self->provision($prefix, $dcvars->{DOMAIN},
 523                                    "RFC2307MEMBER",
 524                                    "loCalMemberPass",
 525                                    $member_options,
 526                                    $dcvars->{SERVER_IP},
 527                                    $dcvars->{SERVER_IPV6});
 528
 529         $ret or return undef;
 530
 531         close(USERMAP);
 532         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 533         $ret->{REALM} = $dcvars->{REALM};
 534         $ret->{DOMSID} = $dcvars->{DOMSID};
 535
 536         my $ctx;
 537         my $prefix_abs = abs_path($prefix);
 538         $ctx = {};
 539         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 540         $ctx->{domain} = $dcvars->{DOMAIN};
 541         $ctx->{realm} = $dcvars->{REALM};
 542         $ctx->{dnsname} = lc($dcvars->{REALM});
 543         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 544         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 545         $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
 546         Samba::mk_krb5_conf($ctx, "");
 547
 548         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 549
 550         my $net = Samba::bindir_path($self, "net");
 551         # Add hosts file for name lookups
 552         my $cmd = "NSS_WRAPPER_HOSTS='$ret->{NSS_WRAPPER_HOSTS}' ";
 553         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 554         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 555                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 556         } else {
 557                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 558         }
 559         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 560         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 561         $cmd .= "$net join $ret->{CONFIGURATION}";
 562         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 563
 564         if (system($cmd) != 0) {
 565             warn("Join failed\n$cmd");
 566             return undef;
 567         }
 568
 569         # We need world access to this share, as otherwise the domain
 570         # administrator from the AD domain provided by Samba4 can't
 571         # access the share for tests.
 572         chmod 0777, "$prefix/share";
 573
 574         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 575                 return undef;
 576         }
 577
 578         $ret->{DC_SERVER} = $dcvars->{SERVER};
 579         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 580         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 581         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 582         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 583         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 584
 585         return $ret;
 586 }
 587
 588 sub setup_ad_member_idmap_rid
 589 {
 590         my ($self, $prefix, $dcvars) = @_;
 591
 592         # If we didn't build with ADS, pretend this env was never available
 593         if (not $self->have_ads()) {
 594                 return "UNKNOWN";
 595         }
 596
 597         print "PROVISIONING S3 AD MEMBER WITH idmap_rid config...";
 598
 599         my $member_options = "
 600         security = ads
 601         workgroup = $dcvars->{DOMAIN}
 602         realm = $dcvars->{REALM}
 603         idmap config * : backend = tdb
 604         idmap config * : range = 1000000-1999999
 605         idmap config $dcvars->{DOMAIN} : backend = rid
 606         idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
 607 ";
 608
 609         my $ret = $self->provision($prefix, $dcvars->{DOMAIN},
 610                                    "IDMAPRIDMEMBER",
 611                                    "loCalMemberPass",
 612                                    $member_options,
 613                                    $dcvars->{SERVER_IP},
 614                                    $dcvars->{SERVER_IPV6});
 615
 616         $ret or return undef;
 617
 618         close(USERMAP);
 619         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 620         $ret->{REALM} = $dcvars->{REALM};
 621         $ret->{DOMSID} = $dcvars->{DOMSID};
 622
 623         my $ctx;
 624         my $prefix_abs = abs_path($prefix);
 625         $ctx = {};
 626         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 627         $ctx->{domain} = $dcvars->{DOMAIN};
 628         $ctx->{realm} = $dcvars->{REALM};
 629         $ctx->{dnsname} = lc($dcvars->{REALM});
 630         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 631         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 632         $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
 633         Samba::mk_krb5_conf($ctx, "");
 634
 635         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 636
 637         my $net = Samba::bindir_path($self, "net");
 638         # Add hosts file for name lookups
 639         my $cmd = "NSS_WRAPPER_HOSTS='$ret->{NSS_WRAPPER_HOSTS}' ";
 640         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 641         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 642                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 643         } else {
 644                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 645         }
 646         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 647         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 648         $cmd .= "$net join $ret->{CONFIGURATION}";
 649         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 650
 651         if (system($cmd) != 0) {
 652             warn("Join failed\n$cmd");
 653             return undef;
 654         }
 655
 656         # We need world access to this share, as otherwise the domain
 657         # administrator from the AD domain provided by Samba4 can't
 658         # access the share for tests.
 659         chmod 0777, "$prefix/share";
 660
 661         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 662                 return undef;
 663         }
 664
 665         $ret->{DC_SERVER} = $dcvars->{SERVER};
 666         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 667         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 668         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 669         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 670         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 671
 672         return $ret;
 673 }
 674
 675 sub setup_ad_member_idmap_ad
 676 {
 677         my ($self, $prefix, $dcvars) = @_;
 678
 679         # If we didn't build with ADS, pretend this env was never available
 680         if (not $self->have_ads()) {
 681                 return "UNKNOWN";
 682         }
 683
 684         print "PROVISIONING S3 AD MEMBER WITH idmap_ad config...";
 685
 686         my $member_options = "
 687         security = ads
 688         workgroup = $dcvars->{DOMAIN}
 689         realm = $dcvars->{REALM}
 690         password server = $dcvars->{SERVER}
 691         idmap config * : backend = tdb
 692         idmap config * : range = 1000000-1999999
 693         idmap config $dcvars->{DOMAIN} : backend = ad
 694         idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
 695 ";
 696
 697         my $ret = $self->provision($prefix, $dcvars->{DOMAIN},
 698                                    "IDMAPADMEMBER",
 699                                    "loCalMemberPass",
 700                                    $member_options,
 701                                    $dcvars->{SERVER_IP},
 702                                    $dcvars->{SERVER_IPV6});
 703
 704         $ret or return undef;
 705
 706         close(USERMAP);
 707         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 708         $ret->{REALM} = $dcvars->{REALM};
 709         $ret->{DOMSID} = $dcvars->{DOMSID};
 710
 711         my $ctx;
 712         my $prefix_abs = abs_path($prefix);
 713         $ctx = {};
 714         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 715         $ctx->{domain} = $dcvars->{DOMAIN};
 716         $ctx->{realm} = $dcvars->{REALM};
 717         $ctx->{dnsname} = lc($dcvars->{REALM});
 718         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 719         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 720         $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
 721         Samba::mk_krb5_conf($ctx, "");
 722
 723         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 724
 725         my $net = Samba::bindir_path($self, "net");
 726         # Add hosts file for name lookups
 727         my $cmd = "NSS_WRAPPER_HOSTS='$ret->{NSS_WRAPPER_HOSTS}' ";
 728         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 729         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 730                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 731         } else {
 732                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 733         }
 734         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 735         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 736         $cmd .= "$net join $ret->{CONFIGURATION}";
 737         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 738
 739         if (system($cmd) != 0) {
 740             warn("Join failed\n$cmd");
 741             return undef;
 742         }
 743
 744         # We need world access to this share, as otherwise the domain
 745         # administrator from the AD domain provided by Samba4 can't
 746         # access the share for tests.
 747         chmod 0777, "$prefix/share";
 748
 749         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 750                 return undef;
 751         }
 752
 753         $ret->{DC_SERVER} = $dcvars->{SERVER};
 754         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 755         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 756         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 757         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 758         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 759
 760         return $ret;
 761 }
 762
 763 sub setup_simpleserver
 764 {
 765         my ($self, $path) = @_;
 766
 767         print "PROVISIONING simple server...";
 768
 769         my $prefix_abs = abs_path($path);
 770
 771         my $simpleserver_options = "
 772         lanman auth = yes
 773         ntlm auth = yes
 774         vfs objects = xattr_tdb streams_depot
 775         change notify = no
 776         smb encrypt = off
 777
 778 [vfs_aio_pthread]
 779         path = $prefix_abs/share
 780         read only = no
 781         vfs objects = aio_pthread
 782         aio_pthread:aio open = yes
 783         smbd:async dosmode = no
 784
 785 [vfs_aio_pthread_async_dosmode_default1]
 786         path = $prefix_abs/share
 787         read only = no
 788         vfs objects = aio_pthread
 789         store dos attributes = yes
 790         aio_pthread:aio open = yes
 791         smbd:async dosmode = yes
 792
 793 [vfs_aio_pthread_async_dosmode_default2]
 794         path = $prefix_abs/share
 795         read only = no
 796         vfs objects = aio_pthread xattr_tdb
 797         store dos attributes = yes
 798         aio_pthread:aio open = yes
 799         smbd:async dosmode = yes
 800
 801 [vfs_aio_pthread_async_dosmode_force_sync1]
 802         path = $prefix_abs/share
 803         read only = no
 804         vfs objects = aio_pthread
 805         store dos attributes = yes
 806         aio_pthread:aio open = yes
 807         smbd:async dosmode = yes
 808         # This simulates non linux systems
 809         smbd:force sync user path safe threadpool = yes
 810         smbd:force sync user chdir safe threadpool = yes
 811         smbd:force sync root path safe threadpool = yes
 812         smbd:force sync root chdir safe threadpool = yes
 813
 814 [vfs_aio_pthread_async_dosmode_force_sync2]
 815         path = $prefix_abs/share
 816         read only = no
 817         vfs objects = aio_pthread xattr_tdb
 818         store dos attributes = yes
 819         aio_pthread:aio open = yes
 820         smbd:async dosmode = yes
 821         # This simulates non linux systems
 822         smbd:force sync user path safe threadpool = yes
 823         smbd:force sync user chdir safe threadpool = yes
 824         smbd:force sync root path safe threadpool = yes
 825         smbd:force sync root chdir safe threadpool = yes
 826
 827 [vfs_aio_fork]
 828         path = $prefix_abs/share
 829         vfs objects = aio_fork
 830         read only = no
 831         vfs_aio_fork:erratic_testing_mode=yes
 832
 833 [dosmode]
 834         path = $prefix_abs/share
 835         vfs objects =
 836         store dos attributes = yes
 837         hide files = /hidefile/
 838         hide dot files = yes
 839
 840 [enc_desired]
 841         path = $prefix_abs/share
 842         vfs objects =
 843         smb encrypt = desired
 844
 845 [hidenewfiles]
 846         path = $prefix_abs/share
 847         hide new files timeout = 5
 848 ";
 849
 850         my $vars = $self->provision($path, "WORKGROUP",
 851                                     "LOCALSHARE4",
 852                                     "local4pass",
 853                                     $simpleserver_options);
 854
 855         $vars or return undef;
 856
 857         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 858                return undef;
 859         }
 860
 861         return $vars;
 862 }
 863
 864 sub setup_fileserver
 865 {
 866         my ($self, $path) = @_;
 867         my $prefix_abs = abs_path($path);
 868         my $srcdir_abs = abs_path($self->{srcdir});
 869
 870         print "PROVISIONING file server ...\n";
 871
 872         my @dirs = ();
 873
 874         mkdir($prefix_abs, 0777);
 875
 876         my $usershare_dir="$prefix_abs/lib/usershare";
 877
 878         mkdir("$prefix_abs/lib", 0755);
 879         remove_tree($usershare_dir);
 880         mkdir($usershare_dir, 01770);
 881
 882         my $share_dir="$prefix_abs/share";
 883
 884         # Create share directory structure
 885         my $lower_case_share_dir="$share_dir/lower-case";
 886         push(@dirs, $lower_case_share_dir);
 887
 888         my $lower_case_share_dir_30000="$share_dir/lower-case-30000";
 889         push(@dirs, $lower_case_share_dir_30000);
 890
 891         my $dfree_share_dir="$share_dir/dfree";
 892         push(@dirs, $dfree_share_dir);
 893         push(@dirs, "$dfree_share_dir/subdir1");
 894         push(@dirs, "$dfree_share_dir/subdir2");
 895         push(@dirs, "$dfree_share_dir/subdir3");
 896
 897         my $quotadir_dir="$share_dir/quota";
 898         push(@dirs, $quotadir_dir);
 899
 900         my $valid_users_sharedir="$share_dir/valid_users";
 901         push(@dirs,$valid_users_sharedir);
 902
 903         my $offline_sharedir="$share_dir/offline";
 904         push(@dirs,$offline_sharedir);
 905
 906         my $force_user_valid_users_dir = "$share_dir/force_user_valid_users";
 907         push(@dirs, $force_user_valid_users_dir);
 908
 909         my $smbget_sharedir="$share_dir/smbget";
 910         push(@dirs,$smbget_sharedir);
 911
 912         my $tarmode_sharedir="$share_dir/tarmode";
 913         push(@dirs,$tarmode_sharedir);
 914
 915         my $usershare_sharedir="$share_dir/usershares";
 916         push(@dirs,$usershare_sharedir);
 917
 918         my $fileserver_options = "
 919         kernel change notify = yes
 920
 921         usershare path = $usershare_dir
 922         usershare max shares = 10
 923         usershare allow guests = yes
 924         usershare prefix allow list = $usershare_sharedir
 925
 926         get quota command = $prefix_abs/getset_quota.py
 927         set quota command = $prefix_abs/getset_quota.py
 928 [lowercase]
 929         path = $lower_case_share_dir
 930         comment = smb username is [%U]
 931         case sensitive = True
 932         default case = lower
 933         preserve case = no
 934         short preserve case = no
 935 [lowercase-30000]
 936         path = $lower_case_share_dir_30000
 937         comment = smb username is [%U]
 938         case sensitive = True
 939         default case = lower
 940         preserve case = no
 941         short preserve case = no
 942 [dfree]
 943         path = $dfree_share_dir
 944         comment = smb username is [%U]
 945         dfree command = $srcdir_abs/testprogs/blackbox/dfree.sh
 946 [valid-users-access]
 947         path = $valid_users_sharedir
 948         valid users = +userdup
 949 [offline]
 950         path = $offline_sharedir
 951         vfs objects = offline
 952
 953 # BUG: https://bugzilla.samba.org/show_bug.cgi?id=9878
 954 # RH BUG: https://bugzilla.redhat.com/show_bug.cgi?id=1077651
 955 [force_user_valid_users]
 956         path = $force_user_valid_users_dir
 957         comment = force user with valid users combination test share
 958         valid users = +force_user
 959         force user = force_user
 960         force group = everyone
 961         write list = force_user
 962
 963 [smbget]
 964         path = $smbget_sharedir
 965         comment = smb username is [%U]
 966         guest ok = yes
 967 [ign_sysacls]
 968         path = $share_dir
 969         comment = ignore system acls
 970         acl_xattr:ignore system acls = yes
 971 [inherit_owner]
 972         path = $share_dir
 973         comment = inherit owner
 974         inherit owner = yes
 975 [inherit_owner_u]
 976         path = $share_dir
 977         comment = inherit only unix owner
 978         inherit owner = unix only
 979         acl_xattr:ignore system acls = yes
 980 [homes]
 981         comment = Home directories
 982         browseable = No
 983         read only = No
 984 ";
 985
 986         my $vars = $self->provision($path, "WORKGROUP",
 987                                     "FILESERVER",
 988                                     "fileserver",
 989                                     $fileserver_options,
 990                                     undef,
 991                                     undef,
 992                                     1);
 993
 994         $vars or return undef;
 995
 996         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 997                return undef;
 998         }
 999
1000
1001         mkdir($_, 0777) foreach(@dirs);
1002
1003         ## Create case sensitive lower case share dir
1004         foreach my $file ('a'..'z') {
1005                 my $full_path = $lower_case_share_dir . '/' . $file;
1006                 open my $fh, '>', $full_path;
1007                 # Add some content to file
1008                 print $fh $full_path;
1009                 close $fh;
1010         }
1011
1012         for (my $file = 1; $file < 51; ++$file) {
1013                 my $full_path = $lower_case_share_dir . '/' . $file;
1014                 open my $fh, '>', $full_path;
1015                 # Add some content to file
1016                 print $fh $full_path;
1017                 close $fh;
1018         }
1019
1020         # Create content for 30000 share
1021         foreach my $file ('a'..'z') {
1022                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
1023                 open my $fh, '>', $full_path;
1024                 # Add some content to file
1025                 print $fh $full_path;
1026                 close $fh;
1027         }
1028
1029         for (my $file = 1; $file < 30001; ++$file) {
1030                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
1031                 open my $fh, '>', $full_path;
1032                 # Add some content to file
1033                 print $fh $full_path;
1034                 close $fh;
1035         }
1036
1037         ##
1038         ## create a listable file in valid_users_share
1039         ##
1040         my $valid_users_target = "$valid_users_sharedir/foo";
1041         unless (open(VALID_USERS_TARGET, ">$valid_users_target")) {
1042                 warn("Unable to open $valid_users_target");
1043                 return undef;
1044         }
1045         close(VALID_USERS_TARGET);
1046         chmod 0644, $valid_users_target;
1047
1048         return $vars;
1049 }
1050
1051 sub setup_ktest
1052 {
1053         my ($self, $prefix) = @_;
1054
1055         # If we didn't build with ADS, pretend this env was never available
1056         if (not $self->have_ads()) {
1057                 return "UNKNOWN";
1058         }
1059
1060         print "PROVISIONING server with security=ads...";
1061
1062         my $ktest_options = "
1063         workgroup = KTEST
1064         realm = ktest.samba.example.com
1065         security = ads
1066         username map = $prefix/lib/username.map
1067         server signing = required
1068         server min protocol = SMB3_00
1069         client max protocol = SMB3
1070
1071         # This disables NTLM auth against the local SAM, which
1072         # we use can then test this setting by.
1073         ntlm auth = disabled
1074 ";
1075
1076         my $ret = $self->provision($prefix, "KTEST",
1077                                    "LOCALKTEST6",
1078                                    "localktest6pass",
1079                                    $ktest_options);
1080
1081         $ret or return undef;
1082
1083         my $ctx;
1084         my $prefix_abs = abs_path($prefix);
1085         $ctx = {};
1086         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
1087         $ctx->{domain} = "KTEST";
1088         $ctx->{realm} = "KTEST.SAMBA.EXAMPLE.COM";
1089         $ctx->{dnsname} = lc($ctx->{realm});
1090         $ctx->{kdc_ipv4} = "0.0.0.0";
1091         $ctx->{kdc_ipv6} = "::";
1092         $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
1093         Samba::mk_krb5_conf($ctx, "");
1094
1095         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
1096
1097         open(USERMAP, ">$prefix/lib/username.map") or die("Unable to open $prefix/lib/username.map");
1098         print USERMAP "
1099 $ret->{USERNAME} = KTEST\\Administrator
1100 ";
1101         close(USERMAP);
1102
1103 #This is the secrets.tdb created by 'net ads join' from Samba3 to a
1104 #Samba4 DC with the same parameters as are being used here.  The
1105 #domain SID is S-1-5-21-1071277805-689288055-3486227160
1106         $ret->{SAMSID} = "S-1-5-21-1911091480-1468226576-2729736297";
1107         $ret->{DOMSID} = "S-1-5-21-1071277805-689288055-3486227160";
1108
1109         system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb $prefix/private/secrets.tdb");
1110         chmod 0600, "$prefix/private/secrets.tdb";
1111
1112 #Make sure there's no old ntdb file.
1113         system("rm -f $prefix/private/secrets.ntdb");
1114
1115 #This uses a pre-calculated krb5 credentials cache, obtained by running Samba4 with:
1116 # "--option=kdc:service ticket lifetime=239232" "--option=kdc:user ticket lifetime=239232" "--option=kdc:renewal lifetime=239232"
1117 #
1118 #and having in krb5.conf:
1119 # ticket_lifetime = 799718400
1120 # renew_lifetime = 799718400
1121 #
1122 # The commands for the -2 keytab where were:
1123 # kinit administrator@KTEST.SAMBA.EXAMPLE.COM
1124 # kvno host/localktest6@KTEST.SAMBA.EXAMPLE.COM
1125 # kvno cifs/localktest6@KTEST.SAMBA.EXAMPLE.COM
1126 # kvno host/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
1127 # kvno cifs/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
1128 #
1129 # and then for the -3 keytab, I did
1130 #
1131 # net changetrustpw; kdestroy and the same again.
1132 #
1133 # This creates a credential cache with a very long lifetime (2036 at
1134 # at 2011-04), and shows that running 'net changetrustpw' does not
1135 # break existing logins (for the secrets.tdb method at least).
1136 #
1137
1138         $ret->{KRB5_CCACHE}="FILE:$prefix/krb5_ccache";
1139
1140         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-2 $prefix/krb5_ccache-2");
1141         chmod 0600, "$prefix/krb5_ccache-2";
1142
1143         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-3 $prefix/krb5_ccache-3");
1144         chmod 0600, "$prefix/krb5_ccache-3";
1145
1146         # We need world access to this share, as otherwise the domain
1147         # administrator from the AD domain provided by ktest can't
1148         # access the share for tests.
1149         chmod 0777, "$prefix/share";
1150
1151         if (not $self->check_or_start($ret, "yes", "no", "yes")) {
1152                return undef;
1153         }
1154         return $ret;
1155 }
1156
1157 sub setup_maptoguest
1158 {
1159         my ($self, $path) = @_;
1160
1161         print "PROVISIONING maptoguest...";
1162
1163         my $options = "
1164 map to guest = bad user
1165 ntlm auth = yes
1166 ";
1167
1168         my $vars = $self->provision($path, "WORKGROUP",
1169                                     "maptoguest",
1170                                     "maptoguestpass",
1171                                     $options);
1172
1173         $vars or return undef;
1174
1175         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
1176                return undef;
1177         }
1178
1179         return $vars;
1180 }
1181
1182 sub stop_sig_term($$) {
1183         my ($self, $pid) = @_;
1184         kill("USR1", $pid) or kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
1185 }
1186
1187 sub stop_sig_kill($$) {
1188         my ($self, $pid) = @_;
1189         kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
1190 }
1191
1192 sub write_pid($$$)
1193 {
1194         my ($env_vars, $app, $pid) = @_;
1195
1196         open(PID, ">$env_vars->{PIDDIR}/timelimit.$app.pid");
1197         print PID $pid;
1198         close(PID);
1199 }
1200
1201 sub read_pid($$)
1202 {
1203         my ($env_vars, $app) = @_;
1204
1205         open(PID, "<$env_vars->{PIDDIR}/timelimit.$app.pid");
1206         my $pid = <PID>;
1207         close(PID);
1208         return $pid;
1209 }
1210
1211 sub check_or_start($$$$$) {
1212         my ($self, $env_vars, $nmbd, $winbindd, $smbd) = @_;
1213
1214         # use a pipe for stdin in the child processes. This allows
1215         # those processes to monitor the pipe for EOF to ensure they
1216         # exit when the test script exits
1217         pipe(STDIN_READER, $env_vars->{STDIN_PIPE});
1218
1219         unlink($env_vars->{NMBD_TEST_LOG});
1220         print "STARTING NMBD...";
1221         my $pid = fork();
1222         if ($pid == 0) {
1223                 open STDOUT, ">$env_vars->{NMBD_TEST_LOG}";
1224                 open STDERR, '>&STDOUT';
1225
1226                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
1227
1228                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
1229                 $ENV{KRB5CCNAME} = "$env_vars->{KRB5_CCACHE}.nmbd";
1230                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
1231                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
1232
1233                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
1234                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
1235                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
1236                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
1237                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
1238                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
1239                 $ENV{UID_WRAPPER_ROOT} = "1";
1240
1241                 $ENV{ENVNAME} = "$ENV{ENVNAME}.nmbd";
1242
1243                 if ($nmbd ne "yes") {
1244                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
1245                                 my $signame = shift;
1246                                 print("Skip nmbd received signal $signame");
1247                                 exit 0;
1248                         };
1249                         sleep($self->{server_maxtime});
1250                         exit 0;
1251                 }
1252
1253                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
1254                 my @optargs = ("-d0");
1255                 if (defined($ENV{NMBD_OPTIONS})) {
1256                         @optargs = split(/ /, $ENV{NMBD_OPTIONS});
1257                 }
1258                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
1259                 if(defined($ENV{NMBD_VALGRIND})) {
1260                         @preargs = split(/ /, $ENV{NMBD_VALGRIND});
1261                 }
1262                 my @args = ("-F", "--no-process-group",
1263                             "-s", $env_vars->{SERVERCONFFILE},
1264                             "-l", $env_vars->{LOGDIR});
1265                 if (not defined($ENV{NMBD_DONT_LOG_STDOUT})) {
1266                         push(@args, "--log-stdout");
1267                 }
1268
1269                 close($env_vars->{STDIN_PIPE});
1270                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1271
1272                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1273                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1274         }
1275         $env_vars->{NMBD_TL_PID} = $pid;
1276         write_pid($env_vars, "nmbd", $pid);
1277         print "DONE\n";
1278
1279         unlink($env_vars->{WINBINDD_TEST_LOG});
1280         print "STARTING WINBINDD...";
1281         $pid = fork();
1282         if ($pid == 0) {
1283                 open STDOUT, ">$env_vars->{WINBINDD_TEST_LOG}";
1284                 open STDERR, '>&STDOUT';
1285
1286                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
1287
1288                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
1289                 $ENV{KRB5CCNAME} = "$env_vars->{KRB5_CCACHE}.winbindd";
1290                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
1291                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
1292
1293                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
1294                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
1295                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
1296                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
1297                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
1298                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
1299                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
1300                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
1301                 } else {
1302                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
1303                 }
1304                 $ENV{UID_WRAPPER_ROOT} = "1";
1305
1306                 $ENV{ENVNAME} = "$ENV{ENVNAME}.winbindd";
1307
1308                 if ($winbindd ne "yes") {
1309                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
1310                                 my $signame = shift;
1311                                 print("Skip winbindd received signal $signame");
1312                                 exit 0;
1313                         };
1314                         sleep($self->{server_maxtime});
1315                         exit 0;
1316                 }
1317
1318                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
1319                 my @optargs = ("-d0");
1320                 if (defined($ENV{WINBINDD_OPTIONS})) {
1321                         @optargs = split(/ /, $ENV{WINBINDD_OPTIONS});
1322                 }
1323                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
1324                 if(defined($ENV{WINBINDD_VALGRIND})) {
1325                         @preargs = split(/ /, $ENV{WINBINDD_VALGRIND});
1326                 }
1327                 my @args = ("-F", "--no-process-group",
1328                             "-s", $env_vars->{SERVERCONFFILE},
1329                             "-l", $env_vars->{LOGDIR});
1330                 if (not defined($ENV{WINBINDD_DONT_LOG_STDOUT})) {
1331                         push(@args, "--stdout");
1332                 }
1333
1334                 close($env_vars->{STDIN_PIPE});
1335                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1336
1337                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1338                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1339         }
1340         $env_vars->{WINBINDD_TL_PID} = $pid;
1341         write_pid($env_vars, "winbindd", $pid);
1342         print "DONE\n";
1343
1344         unlink($env_vars->{SMBD_TEST_LOG});
1345         print "STARTING SMBD...";
1346         $pid = fork();
1347         if ($pid == 0) {
1348                 open STDOUT, ">$env_vars->{SMBD_TEST_LOG}";
1349                 open STDERR, '>&STDOUT';
1350
1351                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
1352
1353                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
1354                 $ENV{KRB5CCNAME} = "$env_vars->{KRB5_CCACHE}.smbd";
1355                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
1356                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
1357
1358                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
1359                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
1360                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
1361                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
1362                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
1363                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
1364                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
1365                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
1366                 } else {
1367                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
1368                 }
1369                 $ENV{UID_WRAPPER_ROOT} = "1";
1370
1371                 $ENV{ENVNAME} = "$ENV{ENVNAME}.smbd";
1372
1373                 if ($smbd ne "yes") {
1374                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
1375                                 my $signame = shift;
1376                                 print("Skip smbd received signal $signame");
1377                                 exit 0;
1378                         };
1379                         sleep($self->{server_maxtime});
1380                         exit 0;
1381                 }
1382
1383                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "smbd");
1384                 my @optargs = ("-d0");
1385                 if (defined($ENV{SMBD_OPTIONS})) {
1386                         @optargs = split(/ /, $ENV{SMBD_OPTIONS});
1387                 }
1388                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
1389                 if(defined($ENV{SMBD_VALGRIND})) {
1390                         @preargs = split(/ /,$ENV{SMBD_VALGRIND});
1391                 }
1392                 my @args = ("-F", "--no-process-group",
1393                             "-s", $env_vars->{SERVERCONFFILE},
1394                             "-l", $env_vars->{LOGDIR});
1395                 if (not defined($ENV{SMBD_DONT_LOG_STDOUT})) {
1396                         push(@args, "--log-stdout");
1397                 }
1398
1399                 close($env_vars->{STDIN_PIPE});
1400                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1401
1402                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1403                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1404         }
1405         $env_vars->{SMBD_TL_PID} = $pid;
1406         write_pid($env_vars, "smbd", $pid);
1407         print "DONE\n";
1408
1409         close(STDIN_READER);
1410
1411         return $self->wait_for_start($env_vars, $nmbd, $winbindd, $smbd);
1412 }
1413
1414 sub createuser($$$$$)
1415 {
1416         my ($self, $username, $password, $conffile, $env) = @_;
1417         my $cmd = "UID_WRAPPER_ROOT=1 " . Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $username > /dev/null";
1418
1419         keys %$env;
1420         while(my($var, $val) = each %$env) {
1421                 $cmd = "$var=\"$val\" $cmd";
1422         }
1423
1424         unless (open(PWD, "|$cmd")) {
1425             warn("Unable to set password for $username account\n$cmd");
1426             return undef;
1427         }
1428         print PWD "$password\n$password\n";
1429         unless (close(PWD)) {
1430             warn("Unable to set password for $username account\n$cmd");
1431             return undef;
1432         }
1433 }
1434
1435 sub provision($$$$$$$$$)
1436 {
1437         my ($self, $prefix, $domain, $server, $password, $extra_options, $dc_server_ip, $dc_server_ipv6, $no_delete_prefix) = @_;
1438
1439         ##
1440         ## setup the various environment variables we need
1441         ##
1442
1443         my $samsid = Samba::random_domain_sid();
1444         my $swiface = Samba::get_interface($server);
1445         my %ret = ();
1446         my %createuser_env = ();
1447         my $server_ip = "127.0.0.$swiface";
1448         my $server_ipv6 = sprintf("fd00:0000:0000:0000:0000:0000:5357:5f%02x", $swiface);
1449
1450         my $unix_name = ($ENV{USER} or $ENV{LOGNAME} or `PATH=/usr/ucb:$ENV{PATH} whoami`);
1451         chomp $unix_name;
1452         my $unix_uid = $>;
1453         my $unix_gids_str = $);
1454         my @unix_gids = split(" ", $unix_gids_str);
1455
1456         my $prefix_abs = abs_path($prefix);
1457         my $bindir_abs = abs_path($self->{bindir});
1458
1459         my @dirs = ();
1460
1461         my $shrdir="$prefix_abs/share";
1462         push(@dirs,$shrdir);
1463
1464         my $libdir="$prefix_abs/lib";
1465         push(@dirs,$libdir);
1466
1467         my $piddir="$prefix_abs/pid";
1468         push(@dirs,$piddir);
1469
1470         my $privatedir="$prefix_abs/private";
1471         push(@dirs,$privatedir);
1472
1473         my $binddnsdir = "$prefix_abs/bind-dns";
1474         push(@dirs, $binddnsdir);
1475
1476         my $lockdir="$prefix_abs/lockdir";
1477         push(@dirs,$lockdir);
1478
1479         my $eventlogdir="$prefix_abs/lockdir/eventlog";
1480         push(@dirs,$eventlogdir);
1481
1482         my $logdir="$prefix_abs/logs";
1483         push(@dirs,$logdir);
1484
1485         my $driver32dir="$shrdir/W32X86";
1486         push(@dirs,$driver32dir);
1487
1488         my $driver64dir="$shrdir/x64";
1489         push(@dirs,$driver64dir);
1490
1491         my $driver40dir="$shrdir/WIN40";
1492         push(@dirs,$driver40dir);
1493
1494         my $ro_shrdir="$shrdir/root-tmp";
1495         push(@dirs,$ro_shrdir);
1496
1497         my $msdfs_shrdir="$shrdir/msdfsshare";
1498         push(@dirs,$msdfs_shrdir);
1499
1500         my $msdfs_deeppath="$msdfs_shrdir/deeppath";
1501         push(@dirs,$msdfs_deeppath);
1502
1503         my $badnames_shrdir="$shrdir/badnames";
1504         push(@dirs,$badnames_shrdir);
1505
1506         my $lease1_shrdir="$shrdir/SMB2_10";
1507         push(@dirs,$lease1_shrdir);
1508
1509         my $lease2_shrdir="$shrdir/SMB3_00";
1510         push(@dirs,$lease2_shrdir);
1511
1512         my $manglenames_shrdir="$shrdir/manglenames";
1513         push(@dirs,$manglenames_shrdir);
1514
1515         my $widelinks_shrdir="$shrdir/widelinks";
1516         push(@dirs,$widelinks_shrdir);
1517
1518         my $widelinks_linkdir="$shrdir/widelinks_foo";
1519         push(@dirs,$widelinks_linkdir);
1520
1521         my $shadow_tstdir="$shrdir/shadow";
1522         push(@dirs,$shadow_tstdir);
1523         my $shadow_mntdir="$shadow_tstdir/mount";
1524         push(@dirs,$shadow_mntdir);
1525         my $shadow_basedir="$shadow_mntdir/base";
1526         push(@dirs,$shadow_basedir);
1527         my $shadow_shrdir="$shadow_basedir/share";
1528         push(@dirs,$shadow_shrdir);
1529
1530         my $nosymlinks_shrdir="$shrdir/nosymlinks";
1531         push(@dirs,$nosymlinks_shrdir);
1532
1533         my $local_symlinks_shrdir="$shrdir/local_symlinks";
1534         push(@dirs,$local_symlinks_shrdir);
1535
1536         # this gets autocreated by winbindd
1537         my $wbsockdir="$prefix_abs/winbindd";
1538
1539         my $nmbdsockdir="$prefix_abs/nmbd";
1540         unlink($nmbdsockdir);
1541
1542         ##
1543         ## create the test directory layout
1544         ##
1545         die ("prefix_abs = ''") if $prefix_abs eq "";
1546         die ("prefix_abs = '/'") if $prefix_abs eq "/";
1547
1548         mkdir($prefix_abs, 0777);
1549         print "CREATE TEST ENVIRONMENT IN '$prefix'...";
1550         if (not defined($no_delete_prefix) or not $no_delete_prefix) {
1551             system("rm -rf $prefix_abs/*");
1552         }
1553         mkdir($_, 0777) foreach(@dirs);
1554
1555         my $fs_specific_conf = $self->get_fs_specific_conf($shrdir);
1556
1557         ##
1558         ## lockdir and piddir must be 0755
1559         ##
1560         chmod 0755, $lockdir;
1561         chmod 0755, $piddir;
1562
1563
1564         ##
1565         ## create ro and msdfs share layout
1566         ##
1567
1568         chmod 0755, $ro_shrdir;
1569         my $unreadable_file = "$ro_shrdir/unreadable_file";
1570         unless (open(UNREADABLE_FILE, ">$unreadable_file")) {
1571                 warn("Unable to open $unreadable_file");
1572                 return undef;
1573         }
1574         close(UNREADABLE_FILE);
1575         chmod 0600, $unreadable_file;
1576
1577         my $msdfs_target = "$ro_shrdir/msdfs-target";
1578         unless (open(MSDFS_TARGET, ">$msdfs_target")) {
1579                 warn("Unable to open $msdfs_target");
1580                 return undef;
1581         }
1582         close(MSDFS_TARGET);
1583         chmod 0666, $msdfs_target;
1584         symlink "msdfs:$server_ip\\ro-tmp,$server_ipv6\\ro-tmp",
1585                 "$msdfs_shrdir/msdfs-src1";
1586         symlink "msdfs:$server_ipv6\\ro-tmp", "$msdfs_shrdir/deeppath/msdfs-src2";
1587
1588         ##
1589         ## create bad names in $badnames_shrdir
1590         ##
1591         ## (An invalid name, would be mangled to 8.3).
1592         my $badname_target = "$badnames_shrdir/\340|\231\216\377\177";
1593         unless (open(BADNAME_TARGET, ">$badname_target")) {
1594                 warn("Unable to open $badname_target");
1595                 return undef;
1596         }
1597         close(BADNAME_TARGET);
1598         chmod 0666, $badname_target;
1599
1600         ## (A bad name, would not be mangled to 8.3).
1601         my $badname_target = "$badnames_shrdir/\240\276\346\327\377\177";
1602         unless (open(BADNAME_TARGET, ">$badname_target")) {
1603                 warn("Unable to open $badname_target");
1604                 return undef;
1605         }
1606         close(BADNAME_TARGET);
1607         chmod 0666, $badname_target;
1608
1609         ## (A bad good name).
1610         my $badname_target = "$badnames_shrdir/blank.txt";
1611         unless (open(BADNAME_TARGET, ">$badname_target")) {
1612                 warn("Unable to open $badname_target");
1613                 return undef;
1614         }
1615         close(BADNAME_TARGET);
1616         chmod 0666, $badname_target;
1617
1618         ##
1619         ## create mangleable directory names in $manglenames_shrdir
1620         ##
1621         my $manglename_target = "$manglenames_shrdir/foo:bar";
1622         mkdir($manglename_target, 0777);
1623
1624         ##
1625         ## create symlinks for widelinks tests.
1626         ##
1627         my $widelinks_target = "$widelinks_linkdir/target";
1628         unless (open(WIDELINKS_TARGET, ">$widelinks_target")) {
1629                 warn("Unable to open $widelinks_target");
1630                 return undef;
1631         }
1632         close(WIDELINKS_TARGET);
1633         chmod 0666, $widelinks_target;
1634         ##
1635         ## This link should get ACCESS_DENIED
1636         ##
1637         symlink "$widelinks_target", "$widelinks_shrdir/source";
1638         ##
1639         ## This link should be allowed
1640         ##
1641         symlink "$widelinks_shrdir", "$widelinks_shrdir/dot";
1642
1643         my $conffile="$libdir/server.conf";
1644         my $dfqconffile="$libdir/dfq.conf";
1645
1646         my $nss_wrapper_pl = "$ENV{PERL} $self->{srcdir}/third_party/nss_wrapper/nss_wrapper.pl";
1647         my $nss_wrapper_passwd = "$privatedir/passwd";
1648         my $nss_wrapper_group = "$privatedir/group";
1649         my $nss_wrapper_hosts = "$ENV{SELFTEST_PREFIX}/hosts";
1650         my $resolv_conf = "$privatedir/resolv.conf";
1651         my $dns_host_file = "$ENV{SELFTEST_PREFIX}/dns_host_file";
1652
1653         my $mod_printer_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/printing/modprinter.pl";
1654
1655         my $fake_snap_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/fake_snap.pl";
1656
1657         my @eventlog_list = ("dns server", "application");
1658
1659         ##
1660         ## calculate uids and gids
1661         ##
1662
1663         my ($max_uid, $max_gid);
1664         my ($uid_nobody, $uid_root, $uid_pdbtest, $uid_pdbtest2, $uid_userdup);
1665         my ($uid_pdbtest_wkn);
1666         my ($uid_smbget);
1667         my ($uid_force_user);
1668         my ($gid_nobody, $gid_nogroup, $gid_root, $gid_domusers, $gid_domadmins);
1669         my ($gid_userdup, $gid_everyone);
1670         my ($gid_force_user);
1671         my ($uid_user1);
1672         my ($uid_user2);
1673         my ($uid_gooduser);
1674         my ($uid_eviluser);
1675
1676         if ($unix_uid < 0xffff - 12) {
1677                 $max_uid = 0xffff;
1678         } else {
1679                 $max_uid = $unix_uid;
1680         }
1681
1682         $uid_root = $max_uid - 1;
1683         $uid_nobody = $max_uid - 2;
1684         $uid_pdbtest = $max_uid - 3;
1685         $uid_pdbtest2 = $max_uid - 4;
1686         $uid_userdup = $max_uid - 5;
1687         $uid_pdbtest_wkn = $max_uid - 6;
1688         $uid_force_user = $max_uid - 7;
1689         $uid_smbget = $max_uid - 8;
1690         $uid_user1 = $max_uid - 9;
1691         $uid_user2 = $max_uid - 10;
1692         $uid_gooduser = $max_uid - 11;
1693         $uid_eviluser = $max_uid - 12;
1694
1695         if ($unix_gids[0] < 0xffff - 8) {
1696                 $max_gid = 0xffff;
1697         } else {
1698                 $max_gid = $unix_gids[0];
1699         }
1700
1701         $gid_nobody = $max_gid - 1;
1702         $gid_nogroup = $max_gid - 2;
1703         $gid_root = $max_gid - 3;
1704         $gid_domusers = $max_gid - 4;
1705         $gid_domadmins = $max_gid - 5;
1706         $gid_userdup = $max_gid - 6;
1707         $gid_everyone = $max_gid - 7;
1708         $gid_force_user = $max_gid - 8;
1709
1710         ##
1711         ## create conffile
1712         ##
1713
1714         unless (open(CONF, ">$conffile")) {
1715                 warn("Unable to open $conffile");
1716                 return undef;
1717         }
1718         print CONF "
1719 [global]
1720         netbios name = $server
1721         interfaces = $server_ip/8 $server_ipv6/64
1722         bind interfaces only = yes
1723         panic action = cd $self->{srcdir} && $self->{srcdir}/selftest/gdb_backtrace %d %\$(MAKE_TEST_BINARY)
1724         smbd:suicide mode = yes
1725
1726         workgroup = $domain
1727
1728         private dir = $privatedir
1729         binddns dir = $binddnsdir
1730         pid directory = $piddir
1731         lock directory = $lockdir
1732         log file = $logdir/log.\%m
1733         log level = 1
1734         debug pid = yes
1735         max log size = 0
1736
1737         state directory = $lockdir
1738         cache directory = $lockdir
1739
1740         passdb backend = tdbsam
1741
1742         time server = yes
1743
1744         add user script =               $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1745         add group script =              $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action add --name %g
1746         add machine script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1747         add user to group script =      $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action add --member %u --name %g --group_path $nss_wrapper_group
1748         delete user script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action delete --name %u
1749         delete group script =           $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action delete --name %g
1750         delete user from group script = $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action delete --member %u --name %g --group_path $nss_wrapper_group
1751
1752         addprinter command =            $mod_printer_pl -a -s $conffile --
1753         deleteprinter command =         $mod_printer_pl -d -s $conffile --
1754
1755         eventlog list = application \"dns server\"
1756
1757         kernel oplocks = no
1758         kernel change notify = no
1759
1760         logging = file
1761         printing = bsd
1762         printcap name = /dev/null
1763
1764         winbindd socket directory = $wbsockdir
1765         nmbd:socket dir = $nmbdsockdir
1766         idmap config * : range = 100000-200000
1767         winbind enum users = yes
1768         winbind enum groups = yes
1769         winbind separator = /
1770         include system krb5 conf = no
1771
1772 #       min receivefile size = 4000
1773
1774         read only = no
1775
1776         smbd:sharedelay = 100000
1777         smbd:writetimeupdatedelay = 500000
1778         map hidden = no
1779         map system = no
1780         map readonly = no
1781         store dos attributes = yes
1782         create mask = 755
1783         dos filemode = yes
1784         strict rename = yes
1785         strict sync = yes
1786         vfs objects = acl_xattr fake_acls xattr_tdb streams_depot time_audit full_audit
1787
1788         full_audit:syslog = no
1789         full_audit:success = none
1790         full_audit:failure = none
1791
1792         printing = vlp
1793         print command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb print %p %s
1794         lpq command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpq %p
1795         lp rm command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lprm %p %j
1796         lp pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lppause %p %j
1797         lp resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpresume %p %j
1798         queue pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queuepause %p
1799         queue resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queueresume %p
1800         lpq cache time = 0
1801         print notify backchannel = yes
1802
1803         ncalrpc dir = $prefix_abs/ncalrpc
1804
1805         # The samba3.blackbox.smbclient_s3 test uses this to test that
1806         # sending messages works, and that the %m sub works.
1807         message command = mv %s $shrdir/message.%m
1808
1809         # fsrvp server requires registry shares
1810         registry shares = yes
1811
1812         # Used by RPC SRVSVC tests
1813         add share command = $bindir_abs/smbaddshare
1814         change share command = $bindir_abs/smbchangeshare
1815         delete share command = $bindir_abs/smbdeleteshare
1816
1817         # fruit:copyfile is a global option
1818         fruit:copyfile = yes
1819
1820         #this does not mean that we use non-secure test env,
1821         #it just means we ALLOW one to be configured.
1822         allow insecure wide links = yes
1823
1824         # Begin extra options
1825         $extra_options
1826         # End extra options
1827
1828         #Include user defined custom parameters if set
1829 ";
1830
1831         if (defined($ENV{INCLUDE_CUSTOM_CONF})) {
1832                 print CONF "\t$ENV{INCLUDE_CUSTOM_CONF}\n";
1833         }
1834
1835         print CONF "
1836 [tmp]
1837         path = $shrdir
1838         comment = smb username is [%U]
1839 [tmpsort]
1840         path = $shrdir
1841         comment = Load dirsort module
1842         vfs objects = dirsort acl_xattr fake_acls xattr_tdb streams_depot
1843 [tmpenc]
1844         path = $shrdir
1845         comment = encrypt smb username is [%U]
1846         smb encrypt = required
1847         vfs objects = dirsort
1848 [tmpguest]
1849         path = $shrdir
1850         guest ok = yes
1851 [guestonly]
1852         path = $shrdir
1853         guest only = yes
1854         guest ok = yes
1855 [forceuser]
1856         path = $shrdir
1857         force user = $unix_name
1858         guest ok = yes
1859 [forceuser_unixonly]
1860         comment = force a user with unix user SID and group SID
1861         path = $shrdir
1862         force user = pdbtest
1863         guest ok = yes
1864 [forceuser_wkngroup]
1865         comment = force a user with well-known group SID
1866         path = $shrdir
1867         force user = pdbtest_wkn
1868         guest ok = yes
1869 [forcegroup]
1870         path = $shrdir
1871         force group = nogroup
1872         guest ok = yes
1873 [ro-tmp]
1874         path = $ro_shrdir
1875         guest ok = yes
1876 [write-list-tmp]
1877         path = $shrdir
1878         read only = yes
1879         write list = $unix_name
1880 [valid-users-tmp]
1881         path = $shrdir
1882         valid users = $unix_name
1883         access based share enum = yes
1884 [msdfs-share]
1885         path = $msdfs_shrdir
1886         msdfs root = yes
1887         msdfs shuffle referrals = yes
1888         guest ok = yes
1889 [hideunread]
1890         copy = tmp
1891         hide unreadable = yes
1892 [tmpcase]
1893         copy = tmp
1894         case sensitive = yes
1895 [hideunwrite]
1896         copy = tmp
1897         hide unwriteable files = yes
1898 [durable]
1899         copy = tmp
1900         kernel share modes = no
1901         kernel oplocks = no
1902         posix locking = no
1903 [fs_specific]
1904         copy = tmp
1905         $fs_specific_conf
1906 [print1]
1907         copy = tmp
1908         printable = yes
1909
1910 [print2]
1911         copy = print1
1912 [print3]
1913         copy = print1
1914         default devmode = no
1915 [lp]
1916         copy = print1
1917
1918 [nfs4acl_simple_40]
1919         path = $shrdir
1920         comment = smb username is [%U]
1921         nfs4:mode = simple
1922         nfs4acl_xattr:version = 40
1923         vfs objects = nfs4acl_xattr xattr_tdb
1924
1925 [nfs4acl_special_40]
1926         path = $shrdir
1927         comment = smb username is [%U]
1928         nfs4:mode = special
1929         nfs4acl_xattr:version = 40
1930         vfs objects = nfs4acl_xattr xattr_tdb
1931
1932 [nfs4acl_simple_41]
1933         path = $shrdir
1934         comment = smb username is [%U]
1935         nfs4:mode = simple
1936         vfs objects = nfs4acl_xattr xattr_tdb
1937
1938 [nfs4acl_xdr_40]
1939         path = $shrdir
1940         comment = smb username is [%U]
1941         vfs objects = nfs4acl_xattr xattr_tdb
1942         nfs4:mode = simple
1943         nfs4acl_xattr:encoding = xdr
1944         nfs4acl_xattr:version = 40
1945
1946 [nfs4acl_xdr_41]
1947         path = $shrdir
1948         comment = smb username is [%U]
1949         vfs objects = nfs4acl_xattr xattr_tdb
1950         nfs4:mode = simple
1951         nfs4acl_xattr:encoding = xdr
1952         nfs4acl_xattr:version = 41
1953
1954 [xcopy_share]
1955         path = $shrdir
1956         comment = smb username is [%U]
1957         create mask = 777
1958         force create mode = 777
1959 [posix_share]
1960         path = $shrdir
1961         comment = smb username is [%U]
1962         create mask = 0777
1963         force create mode = 0
1964         directory mask = 0777
1965         force directory mode = 0
1966         vfs objects = xattr_tdb streams_depot
1967 [aio]
1968         copy = tmp
1969         aio read size = 1
1970         aio write size = 1
1971
1972 [print\$]
1973         copy = tmp
1974
1975 [vfs_fruit]
1976         path = $shrdir
1977         vfs objects = catia fruit streams_xattr acl_xattr xattr_tdb
1978         fruit:resource = file
1979         fruit:metadata = netatalk
1980         fruit:locking = netatalk
1981         fruit:encoding = native
1982         fruit:veto_appledouble = no
1983
1984 [vfs_fruit_xattr]
1985         path = $shrdir
1986         # This is used by vfs.fruit tests that require real fs xattr
1987         vfs objects = catia fruit streams_xattr acl_xattr
1988         fruit:resource = file
1989         fruit:metadata = netatalk
1990         fruit:locking = netatalk
1991         fruit:encoding = native
1992         fruit:veto_appledouble = no
1993
1994 [vfs_fruit_metadata_stream]
1995         path = $shrdir
1996         vfs objects = fruit streams_xattr acl_xattr xattr_tdb
1997         fruit:resource = file
1998         fruit:metadata = stream
1999         fruit:veto_appledouble = no
2000
2001 [vfs_fruit_stream_depot]
2002         path = $shrdir
2003         vfs objects = fruit streams_depot acl_xattr xattr_tdb
2004         fruit:resource = stream
2005         fruit:metadata = stream
2006         fruit:veto_appledouble = no
2007
2008 [vfs_wo_fruit]
2009         path = $shrdir
2010         vfs objects = streams_xattr acl_xattr xattr_tdb
2011
2012 [vfs_wo_fruit_stream_depot]
2013         path = $shrdir
2014         vfs objects = streams_depot acl_xattr xattr_tdb
2015
2016 [vfs_fruit_timemachine]
2017         path = $shrdir
2018         vfs objects = fruit streams_xattr acl_xattr xattr_tdb
2019         fruit:resource = file
2020         fruit:metadata = stream
2021         fruit:time machine = yes
2022         fruit:time machine max size = 32K
2023
2024 [vfs_fruit_wipe_intentionally_left_blank_rfork]
2025         path = $shrdir
2026         vfs objects = fruit streams_xattr acl_xattr xattr_tdb
2027         fruit:resource = file
2028         fruit:metadata = stream
2029         fruit:wipe_intentionally_left_blank_rfork = true
2030         fruit:delete_empty_adfiles = false
2031         fruit:veto_appledouble = no
2032
2033 [vfs_fruit_delete_empty_adfiles]
2034         path = $shrdir
2035         vfs objects = fruit streams_xattr acl_xattr xattr_tdb
2036         fruit:resource = file
2037         fruit:metadata = stream
2038         fruit:wipe_intentionally_left_blank_rfork = true
2039         fruit:delete_empty_adfiles = true
2040         fruit:veto_appledouble = no
2041
2042 [badname-tmp]
2043         path = $badnames_shrdir
2044         guest ok = yes
2045
2046 [manglenames_share]
2047         path = $manglenames_shrdir
2048         guest ok = yes
2049
2050 [dynamic_share]
2051         path = $shrdir/%R
2052         guest ok = yes
2053
2054 [widelinks_share]
2055         path = $widelinks_shrdir
2056         wide links = no
2057         guest ok = yes
2058
2059 [fsrvp_share]
2060         path = $shrdir
2061         comment = fake shapshots using rsync
2062         vfs objects = shell_snap shadow_copy2
2063         shell_snap:check path command = $fake_snap_pl --check
2064         shell_snap:create command = $fake_snap_pl --create
2065         shell_snap:delete command = $fake_snap_pl --delete
2066         # a relative path here fails, the snapshot dir is no longer found
2067         shadow:snapdir = $shrdir/.snapshots
2068
2069 [shadow1]
2070         path = $shadow_shrdir
2071         comment = previous versions snapshots under mount point
2072         vfs objects = shadow_copy2
2073         shadow:mountpoint = $shadow_mntdir
2074
2075 [shadow2]
2076         path = $shadow_shrdir
2077         comment = previous versions snapshots outside mount point
2078         vfs objects = shadow_copy2
2079         shadow:mountpoint = $shadow_mntdir
2080         shadow:snapdir = $shadow_tstdir/.snapshots
2081
2082 [shadow3]
2083         path = $shadow_shrdir
2084         comment = previous versions with subvolume snapshots, snapshots under base dir
2085         vfs objects = shadow_copy2
2086         shadow:mountpoint = $shadow_mntdir
2087         shadow:basedir = $shadow_basedir
2088         shadow:snapdir = $shadow_basedir/.snapshots
2089
2090 [shadow4]
2091         path = $shadow_shrdir
2092         comment = previous versions with subvolume snapshots, snapshots outside mount point
2093         vfs objects = shadow_copy2
2094         shadow:mountpoint = $shadow_mntdir
2095         shadow:basedir = $shadow_basedir
2096         shadow:snapdir = $shadow_tstdir/.snapshots
2097
2098 [shadow5]
2099         path = $shadow_shrdir
2100         comment = previous versions at volume root snapshots under mount point
2101         vfs objects = shadow_copy2
2102         shadow:mountpoint = $shadow_shrdir
2103
2104 [shadow6]
2105         path = $shadow_shrdir
2106         comment = previous versions at volume root snapshots outside mount point
2107         vfs objects = shadow_copy2
2108         shadow:mountpoint = $shadow_shrdir
2109         shadow:snapdir = $shadow_tstdir/.snapshots
2110
2111 [shadow7]
2112         path = $shadow_shrdir
2113         comment = previous versions snapshots everywhere
2114         vfs objects = shadow_copy2
2115         shadow:mountpoint = $shadow_mntdir
2116         shadow:snapdirseverywhere = yes
2117
2118 [shadow8]
2119         path = $shadow_shrdir
2120         comment = previous versions using snapsharepath
2121         vfs objects = shadow_copy2
2122         shadow:mountpoint = $shadow_mntdir
2123         shadow:snapdir = $shadow_tstdir/.snapshots
2124         shadow:snapsharepath = share
2125
2126 [shadow_fmt0]
2127         comment = Testing shadow:format with default option
2128         vfs object = shadow_copy2
2129         path = $shadow_shrdir
2130         read only = no
2131         guest ok = yes
2132         shadow:mountpoint = $shadow_mntdir
2133         shadow:basedir = $shadow_basedir
2134         shadow:snapdir = $shadow_basedir/.snapshots
2135         shadow:format = \@GMT-%Y.%m.%d-%H.%M.%S
2136
2137 [shadow_fmt1]
2138         comment = Testing shadow:format with only date component
2139         vfs object = shadow_copy2
2140         path = $shadow_shrdir
2141         read only = no
2142         guest ok = yes
2143         shadow:mountpoint = $shadow_mntdir
2144         shadow:basedir = $shadow_basedir
2145         shadow:snapdir = $shadow_basedir/.snapshots
2146         shadow:format = \@GMT-%Y-%m-%d
2147
2148 [shadow_fmt2]
2149         comment = Testing shadow:format with some hardcoded prefix
2150         vfs object = shadow_copy2
2151         path = $shadow_shrdir
2152         read only = no
2153         guest ok = yes
2154         shadow:mountpoint = $shadow_mntdir
2155         shadow:basedir = $shadow_basedir
2156         shadow:snapdir = $shadow_basedir/.snapshots
2157         shadow:format = snap\@GMT-%Y.%m.%d-%H.%M.%S
2158
2159 [shadow_fmt3]
2160         comment = Testing shadow:format with modified format
2161         vfs object = shadow_copy2
2162         path = $shadow_shrdir
2163         read only = no
2164         guest ok = yes
2165         shadow:mountpoint = $shadow_mntdir
2166         shadow:basedir = $shadow_basedir
2167         shadow:snapdir = $shadow_basedir/.snapshots
2168         shadow:format = \@GMT-%Y.%m.%d-%H_%M_%S-snap
2169
2170 [shadow_fmt4]
2171         comment = Testing shadow:snapprefix regex
2172         vfs object = shadow_copy2
2173         path = $shadow_shrdir
2174         read only = no
2175         guest ok = yes
2176         shadow:mountpoint = $shadow_mntdir
2177         shadow:basedir = $shadow_basedir
2178         shadow:snapdir = $shadow_basedir/.snapshots
2179         shadow:snapprefix = \^s[a-z]*p\$
2180         shadow:format = _GMT-%Y.%m.%d-%H.%M.%S
2181
2182 [shadow_fmt5]
2183         comment = Testing shadow:snapprefix with delim regex
2184         vfs object = shadow_copy2
2185         path = $shadow_shrdir
2186         read only = no
2187         guest ok = yes
2188         shadow:mountpoint = $shadow_mntdir
2189         shadow:basedir = $shadow_basedir
2190         shadow:snapdir = $shadow_basedir/.snapshots
2191         shadow:delimiter = \@GMT
2192         shadow:snapprefix = [a-z]*
2193         shadow:format = \@GMT-%Y.%m.%d-%H.%M.%S
2194
2195 [shadow_wl]
2196         path = $shadow_shrdir
2197         comment = previous versions with wide links allowed
2198         vfs objects = shadow_copy2
2199         shadow:mountpoint = $shadow_mntdir
2200         wide links = yes
2201
2202 [shadow_write]
2203         path = $shadow_tstdir
2204         comment = previous versions snapshots under mount point
2205         vfs objects = shadow_copy2 streams_xattr error_inject
2206         aio write size = 0
2207         error_inject:pwrite = EBADF
2208         shadow:mountpoint = $shadow_tstdir
2209
2210 [dfq]
2211         path = $shrdir/dfree
2212         vfs objects = acl_xattr fake_acls xattr_tdb fake_dfq
2213         admin users = $unix_name
2214         include = $dfqconffile
2215 [dfq_cache]
2216         path = $shrdir/dfree
2217         vfs objects = acl_xattr fake_acls xattr_tdb fake_dfq
2218         admin users = $unix_name
2219         include = $dfqconffile
2220         dfree cache time = 60
2221 [dfq_owner]
2222         path = $shrdir/dfree
2223         vfs objects = acl_xattr fake_acls xattr_tdb fake_dfq
2224         inherit owner = yes
2225         include = $dfqconffile
2226 [quotadir]
2227         path = $shrdir/quota
2228         admin users = $unix_name
2229
2230 [acl_xattr_ign_sysacl_posix]
2231         copy = tmp
2232         acl_xattr:ignore system acls = yes
2233         acl_xattr:default acl style = posix
2234 [acl_xattr_ign_sysacl_windows]
2235         copy = tmp
2236         acl_xattr:ignore system acls = yes
2237         acl_xattr:default acl style = windows
2238
2239 [mangle_illegal]
2240         copy = tmp
2241         mangled names = illegal
2242
2243 [nosymlinks]
2244         copy = tmp
2245         path = $nosymlinks_shrdir
2246         follow symlinks = no
2247
2248 [local_symlinks]
2249         copy = tmp
2250         path = $local_symlinks_shrdir
2251         follow symlinks = yes
2252
2253 [kernel_oplocks]
2254         copy = tmp
2255         kernel oplocks = yes
2256         vfs objects = streams_xattr xattr_tdb
2257
2258 [streams_xattr]
2259         copy = tmp
2260         vfs objects = streams_xattr xattr_tdb
2261
2262 [compound_find]
2263         copy = tmp
2264         smbd:find async delay usec = 10000
2265 [error_inject]
2266         copy = tmp
2267         vfs objects = error_inject
2268         include = $libdir/error_inject.conf
2269
2270 [delay_inject]
2271         copy = tmp
2272         vfs objects = delay_inject
2273         kernel share modes = no
2274         kernel oplocks = no
2275         posix locking = no
2276         include = $libdir/delay_inject.conf
2277
2278 [aio_delay_inject]
2279         copy = tmp
2280         vfs objects = delay_inject
2281         delay_inject:pread_send = 2000
2282         delay_inject:pwrite_send = 2000
2283
2284 [delete_readonly]
2285         path = $prefix_abs/share
2286         delete readonly = yes
2287         ";
2288         close(CONF);
2289
2290         my $net = Samba::bindir_path($self, "net");
2291         my $cmd = "";
2292         $cmd .= "SMB_CONF_PATH=\"$conffile\" ";
2293         $cmd .= "$net setlocalsid $samsid";
2294
2295         if (system($cmd) != 0) {
2296             warn("Join failed\n$cmd");
2297             return undef;
2298         }
2299
2300         unless (open(DFQCONF, ">$dfqconffile")) {
2301                 warn("Unable to open $dfqconffile");
2302                 return undef;
2303         }
2304         close(DFQCONF);
2305
2306         ##
2307         ## create a test account
2308         ##
2309
2310         unless (open(PASSWD, ">$nss_wrapper_passwd")) {
2311            warn("Unable to open $nss_wrapper_passwd");
2312            return undef;
2313         }
2314         print PASSWD "nobody:x:$uid_nobody:$gid_nobody:nobody gecos:$prefix_abs:/bin/false
2315 $unix_name:x:$unix_uid:$unix_gids[0]:$unix_name gecos:$prefix_abs:/bin/false
2316 pdbtest:x:$uid_pdbtest:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
2317 pdbtest2:x:$uid_pdbtest2:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
2318 userdup:x:$uid_userdup:$gid_userdup:userdup gecos:$prefix_abs:/bin/false
2319 pdbtest_wkn:x:$uid_pdbtest_wkn:$gid_everyone:pdbtest_wkn gecos:$prefix_abs:/bin/false
2320 force_user:x:$uid_force_user:$gid_force_user:force user gecos:$prefix_abs:/bin/false
2321 smbget_user:x:$uid_smbget:$gid_domusers:smbget_user gecos:$prefix_abs:/bin/false
2322 user1:x:$uid_user1:$gid_nogroup:user1 gecos:$prefix_abs:/bin/false
2323 user2:x:$uid_user2:$gid_nogroup:user2 gecos:$prefix_abs:/bin/false
2324 gooduser:x:$uid_gooduser:$gid_domusers:gooduser gecos:$prefix_abs:/bin/false
2325 eviluser:x:$uid_eviluser:$gid_domusers:eviluser gecos::/bin/false
2326 ";
2327         if ($unix_uid != 0) {
2328                 print PASSWD "root:x:$uid_root:$gid_root:root gecos:$prefix_abs:/bin/false
2329 ";
2330         }
2331         close(PASSWD);
2332
2333         unless (open(GROUP, ">$nss_wrapper_group")) {
2334              warn("Unable to open $nss_wrapper_group");
2335              return undef;
2336         }
2337         print GROUP "nobody:x:$gid_nobody:
2338 nogroup:x:$gid_nogroup:nobody
2339 $unix_name-group:x:$unix_gids[0]:
2340 domusers:X:$gid_domusers:
2341 domadmins:X:$gid_domadmins:
2342 userdup:x:$gid_userdup:$unix_name
2343 everyone:x:$gid_everyone:
2344 force_user:x:$gid_force_user:
2345 ";
2346         if ($unix_gids[0] != 0) {
2347                 print GROUP "root:x:$gid_root:
2348 ";
2349         }
2350
2351         close(GROUP);
2352
2353         ## hosts
2354         my $hostname = lc($server);
2355         unless (open(HOSTS, ">>$nss_wrapper_hosts")) {
2356                 warn("Unable to open $nss_wrapper_hosts");
2357                 return undef;
2358         }
2359         print HOSTS "${server_ip} ${hostname}.samba.example.com ${hostname}\n";
2360         print HOSTS "${server_ipv6} ${hostname}.samba.example.com ${hostname}\n";
2361         close(HOSTS);
2362
2363         ## hosts
2364         unless (open(RESOLV_CONF, ">$resolv_conf")) {
2365                 warn("Unable to open $resolv_conf");
2366                 return undef;
2367         }
2368         if (defined($dc_server_ip) or defined($dc_server_ipv6)) {
2369                 if (defined($dc_server_ip)) {
2370                         print RESOLV_CONF "nameserver $dc_server_ip\n";
2371                 }
2372                 if (defined($dc_server_ipv6)) {
2373                         print RESOLV_CONF "nameserver $dc_server_ipv6\n";
2374                 }
2375         } else {
2376                 print RESOLV_CONF "nameserver ${server_ip}\n";
2377                 print RESOLV_CONF "nameserver ${server_ipv6}\n";
2378         }
2379         close(RESOLV_CONF);
2380
2381         foreach my $evlog (@eventlog_list) {
2382                 my $evlogtdb = "$eventlogdir/$evlog.tdb";
2383                 open(EVENTLOG, ">$evlogtdb") or die("Unable to open $evlogtdb");
2384                 close(EVENTLOG);
2385         }
2386
2387         $createuser_env{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
2388         $createuser_env{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
2389         $createuser_env{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
2390         $createuser_env{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
2391         if ($ENV{SAMBA_DNS_FAKING}) {
2392                 $createuser_env{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
2393         } else {
2394                 $createuser_env{RESOLV_WRAPPER_CONF} = $resolv_conf;
2395         }
2396
2397         createuser($self, $unix_name, $password, $conffile, \%createuser_env) || die("Unable to create user");
2398         createuser($self, "force_user", $password, $conffile, \%createuser_env) || die("Unable to create force_user");
2399         createuser($self, "smbget_user", $password, $conffile, \%createuser_env) || die("Unable to create smbget_user");
2400         createuser($self, "user1", $password, $conffile, \%createuser_env) || die("Unable to create user1");
2401         createuser($self, "user2", $password, $conffile, \%createuser_env) || die("Unable to create user2");
2402         createuser($self, "gooduser", $password, $conffile, \%createuser_env) || die("Unable to create gooduser");
2403         createuser($self, "eviluser", $password, $conffile, \%createuser_env) || die("Unable to create eviluser");
2404
2405         open(DNS_UPDATE_LIST, ">$prefix/dns_update_list") or die("Unable to open $$prefix/dns_update_list");
2406         print DNS_UPDATE_LIST "A $server. $server_ip\n";
2407         print DNS_UPDATE_LIST "AAAA $server. $server_ipv6\n";
2408         close(DNS_UPDATE_LIST);
2409
2410         print "DONE\n";
2411
2412         $ret{SERVER_IP} = $server_ip;
2413         $ret{SERVER_IPV6} = $server_ipv6;
2414         $ret{NMBD_TEST_LOG} = "$prefix/nmbd_test.log";
2415         $ret{NMBD_TEST_LOG_POS} = 0;
2416         $ret{WINBINDD_TEST_LOG} = "$prefix/winbindd_test.log";
2417         $ret{WINBINDD_TEST_LOG_POS} = 0;
2418         $ret{SMBD_TEST_LOG} = "$prefix/smbd_test.log";
2419         $ret{SMBD_TEST_LOG_POS} = 0;
2420         $ret{SERVERCONFFILE} = $conffile;
2421         $ret{CONFIGURATION} ="-s $conffile";
2422         $ret{LOCK_DIR} = $lockdir;
2423         $ret{SERVER} = $server;
2424         $ret{USERNAME} = $unix_name;
2425         $ret{USERID} = $unix_uid;
2426         $ret{DOMAIN} = $domain;
2427         $ret{SAMSID} = $samsid;
2428         $ret{NETBIOSNAME} = $server;
2429         $ret{PASSWORD} = $password;
2430         $ret{PIDDIR} = $piddir;
2431         $ret{SELFTEST_WINBINDD_SOCKET_DIR} = $wbsockdir;
2432         $ret{NMBD_SOCKET_DIR} = $nmbdsockdir;
2433         $ret{SOCKET_WRAPPER_DEFAULT_IFACE} = $swiface;
2434         $ret{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
2435         $ret{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
2436         $ret{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
2437         $ret{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
2438         $ret{NSS_WRAPPER_MODULE_SO_PATH} = Samba::nss_wrapper_winbind_so_path($self);
2439         $ret{NSS_WRAPPER_MODULE_FN_PREFIX} = "winbind";
2440         if ($ENV{SAMBA_DNS_FAKING}) {
2441                 $ret{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
2442         } else {
2443                 $ret{RESOLV_WRAPPER_CONF} = $resolv_conf;
2444         }
2445         $ret{LOCAL_PATH} = "$shrdir";
2446         $ret{LOGDIR} = $logdir;
2447
2448         #
2449         # Avoid hitting system krb5.conf -
2450         # An env that needs Kerberos will reset this to the real
2451         # value.
2452         #
2453         $ret{KRB5_CONFIG} = abs_path($prefix) . "/no_krb5.conf";
2454
2455         # Define KRB5CCNAME for each environment we set up
2456         $ret{KRB5_CCACHE} = abs_path($prefix) . "/krb5ccache";
2457         $ENV{KRB5CCNAME} = $ret{KRB5_CCACHE};
2458
2459         return \%ret;
2460 }
2461
2462 sub wait_for_start($$$$$)
2463 {
2464         my ($self, $envvars, $nmbd, $winbindd, $smbd) = @_;
2465         my $cmd;
2466         my $netcmd;
2467         my $ret;
2468
2469         if ($nmbd eq "yes") {
2470                 my $count = 0;
2471
2472                 # give time for nbt server to register its names
2473                 print "checking for nmbd\n";
2474
2475                 # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
2476                 my $nmblookup = Samba::bindir_path($self, "nmblookup");
2477
2478                 do {
2479                         $ret = system("$nmblookup $envvars->{CONFIGURATION} $envvars->{SERVER}");
2480                         if ($ret != 0) {
2481                                 sleep(1);
2482                         } else {
2483                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
2484                                 system("$nmblookup $envvars->{CONFIGURATION} __SAMBA__");
2485                                 system("$nmblookup $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
2486                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
2487                         }
2488                         $count++;
2489                 } while ($ret != 0 && $count < 10);
2490                 if ($count == 10) {
2491                         print "NMBD not reachable after 10 retries\n";
2492                         teardown_env($self, $envvars);
2493                         return 0;
2494                 }
2495         }
2496
2497         if ($winbindd eq "yes") {
2498             print "checking for winbindd\n";
2499             my $count = 0;
2500             $cmd = "SELFTEST_WINBINDD_SOCKET_DIR='$envvars->{SELFTEST_WINBINDD_SOCKET_DIR}' ";
2501             $cmd .= "NSS_WRAPPER_PASSWD='$envvars->{NSS_WRAPPER_PASSWD}' ";
2502             $cmd .= "NSS_WRAPPER_GROUP='$envvars->{NSS_WRAPPER_GROUP}' ";
2503             $cmd .= Samba::bindir_path($self, "wbinfo") . " --ping-dc";
2504
2505             do {
2506                 if ($ret != 0) {
2507                     $ret = system($cmd);
2508                     sleep(1);
2509                 }
2510                 $count++;
2511             } while ($ret != 0 && $count < 20);
2512             if ($count == 20) {
2513                 print "WINBINDD not reachable after 20 seconds\n";
2514                 teardown_env($self, $envvars);
2515                 return 0;
2516             }
2517         }
2518
2519         if ($smbd eq "yes") {
2520             # make sure smbd is also up set
2521             print "wait for smbd\n";
2522
2523             my $count = 0;
2524             do {
2525                 $ret = system(Samba::bindir_path($self, "smbclient") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
2526                 if ($ret != 0) {
2527                     sleep(1);
2528                 }
2529                 $count++
2530             } while ($ret != 0 && $count < 20);
2531             if ($count == 20) {
2532                 print "SMBD failed to start up in a reasonable time (20sec)\n";
2533                 teardown_env($self, $envvars);
2534                 return 0;
2535             }
2536         }
2537
2538         # Ensure we have domain users mapped.
2539         $netcmd = "NSS_WRAPPER_PASSWD='$envvars->{NSS_WRAPPER_PASSWD}' ";
2540         $netcmd .= "NSS_WRAPPER_GROUP='$envvars->{NSS_WRAPPER_GROUP}' ";
2541         $netcmd .= Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} ";
2542
2543         $cmd = $netcmd . "groupmap delete ntgroup=domusers";
2544         $ret = system($cmd);
2545
2546         $cmd = $netcmd . "groupmap add rid=513 unixgroup=domusers type=domain";
2547         $ret = system($cmd);
2548         if ($ret != 0) {
2549                 print("\"$cmd\" failed\n");
2550                 return 1;
2551         }
2552
2553         $cmd = $netcmd . "groupmap delete ntgroup=domadmins";
2554         $ret = system($cmd);
2555
2556         $cmd = $netcmd . "groupmap add rid=512 unixgroup=domadmins type=domain";
2557         $ret = system($cmd);
2558         if ($ret != 0) {
2559                 print("\"$cmd\" failed\n");
2560                 return 1;
2561         }
2562
2563         $cmd = $netcmd . "groupmap delete ntgroup=everyone";
2564         $ret = system($cmd);
2565
2566         $cmd = $netcmd . "groupmap add sid=S-1-1-0 unixgroup=everyone type=builtin";
2567         $ret = system($cmd);
2568         if ($ret != 0) {
2569                 print("\"$cmd\" failed\n");
2570                 return 1;
2571         }
2572
2573         # note: creating builtin groups requires winbindd for the
2574         # unix id allocator
2575         my $create_builtin_users = "no";
2576         if ($winbindd eq "yes") {
2577                 $cmd = "SELFTEST_WINBINDD_SOCKET_DIR='$envvars->{SELFTEST_WINBINDD_SOCKET_DIR}' ";
2578                 $cmd .= "NSS_WRAPPER_PASSWD='$envvars->{NSS_WRAPPER_PASSWD}' ";
2579                 $cmd .= "NSS_WRAPPER_GROUP='$envvars->{NSS_WRAPPER_GROUP}' ";
2580                 $cmd .= Samba::bindir_path($self, "wbinfo") . " --sid-to-gid=S-1-5-32-545";
2581                 my $wbinfo_out = qx($cmd 2>&1);
2582                 if ($? != 0) {
2583                         # wbinfo doesn't give us a better error code then
2584                         # WBC_ERR_DOMAIN_NOT_FOUND, but at least that's
2585                         # different then WBC_ERR_WINBIND_NOT_AVAILABLE
2586                         if ($wbinfo_out !~ /WBC_ERR_DOMAIN_NOT_FOUND/) {
2587                                 print("Failed to run \"wbinfo --sid-to-gid=S-1-5-32-545\": $wbinfo_out");
2588                                 teardown_env($self, $envvars);
2589                                 return 0;
2590                         }
2591                         $create_builtin_users = "yes";
2592                 }
2593         }
2594         if ($create_builtin_users eq "yes") {
2595             $cmd = "SELFTEST_WINBINDD_SOCKET_DIR='$envvars->{SELFTEST_WINBINDD_SOCKET_DIR}' ";
2596             $cmd .= "NSS_WRAPPER_PASSWD='$envvars->{NSS_WRAPPER_PASSWD}' ";
2597             $cmd .= "NSS_WRAPPER_GROUP='$envvars->{NSS_WRAPPER_GROUP}' ";
2598             $cmd .= Samba::bindir_path($self, "net") . " $envvars->{CONFIGURATION} ";
2599             $cmd .= "sam createbuiltingroup Users";
2600             $ret = system($cmd);
2601             if ($ret != 0) {
2602                 print "Failed to create BUILTIN\\Users group\n";
2603                 teardown_env($self, $envvars);
2604                 return 0;
2605             }
2606
2607             $cmd = Samba::bindir_path($self, "net") . " $envvars->{CONFIGURATION} ";
2608             $cmd .= "cache del IDMAP/SID2XID/S-1-5-32-545";
2609             system($cmd);
2610
2611             $cmd = "SELFTEST_WINBINDD_SOCKET_DIR='$envvars->{SELFTEST_WINBINDD_SOCKET_DIR}' ";
2612             $cmd .= "NSS_WRAPPER_PASSWD='$envvars->{NSS_WRAPPER_PASSWD}' ";
2613             $cmd .= "NSS_WRAPPER_GROUP='$envvars->{NSS_WRAPPER_GROUP}' ";
2614             $cmd .= Samba::bindir_path($self, "wbinfo") . " --sid-to-gid=S-1-5-32-545";
2615             $ret = system($cmd);
2616             if ($ret != 0) {
2617                 print "Missing \"BUILTIN\\Users\", did net sam createbuiltingroup Users fail?\n";
2618                 teardown_env($self, $envvars);
2619                 return 0;
2620             }
2621         }
2622
2623         print $self->getlog_env($envvars);
2624
2625         return 1;
2626 }
2627
2628 1;