selftest/target/Samba3.pm

   1 #!/usr/bin/perl
   2 # Bootstrap Samba and run a number of tests against it.
   3 # Copyright (C) 2005-2007 Jelmer Vernooij <jelmer@samba.org>
   4 # Published under the GNU GPL, v3 or later.
   5
   6 package Samba3;
   7
   8 use strict;
   9 use Cwd qw(abs_path);
  10 use FindBin qw($RealBin);
  11 use POSIX;
  12 use target::Samba;
  13
  14 sub have_ads($) {
  15         my ($self) = @_;
  16         my $found_ads = 0;
  17         my $smbd_build_options = Samba::bindir_path($self, "smbd") . " -b|";
  18         open(IN, $smbd_build_options) or die("Unable to run $smbd_build_options: $!");
  19
  20         while (<IN>) {
  21                 if (/WITH_ADS/) {
  22                        $found_ads = 1;
  23                 }
  24         }
  25         close IN;
  26
  27         # If we were not built with ADS support, pretend we were never even available
  28         print "smbd does not have ADS support\n" unless $found_ads;
  29         return $found_ads;
  30 }
  31
  32 # return smb.conf parameters applicable to @path, based on the underlying
  33 # filesystem type
  34 sub get_fs_specific_conf($$)
  35 {
  36         my ($self, $path) = @_;
  37         my $mods = "";
  38         my $stat_out = `stat --file-system $path` or return "";
  39
  40         if ($stat_out =~ m/Type:\s+btrfs/) {
  41                 $mods .= "btrfs ";
  42         }
  43
  44         if ($mods) {
  45                 return "vfs objects = $mods";
  46         }
  47
  48         return undef;
  49 }
  50
  51 sub new($$) {
  52         my ($classname, $bindir, $srcdir, $server_maxtime) = @_;
  53         my $self = { vars => {},
  54                      bindir => $bindir,
  55                      srcdir => $srcdir,
  56                      server_maxtime => $server_maxtime
  57         };
  58         bless $self;
  59         return $self;
  60 }
  61
  62 sub teardown_env($$)
  63 {
  64         my ($self, $envvars) = @_;
  65         my $count = 0;
  66
  67         # This should cause smbd to terminate gracefully
  68         close($envvars->{STDIN_PIPE});
  69
  70         my $smbdpid = $envvars->{SMBD_TL_PID};
  71         my $nmbdpid = $envvars->{NMBD_TL_PID};
  72         my $winbinddpid = $envvars->{WINBINDD_TL_PID};
  73
  74         # This should give it time to write out the gcov data
  75         until ($count > 20) {
  76             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  77             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
  78             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
  79             if ($smbdchild == -1
  80                 && $nmbdchild == -1
  81                 && $winbinddchild == -1) {
  82                 last;
  83             }
  84             sleep(1);
  85             $count++;
  86         }
  87
  88         if ($count <= 20 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
  89             return;
  90         }
  91
  92         $self->stop_sig_term($smbdpid);
  93         $self->stop_sig_term($nmbdpid);
  94         $self->stop_sig_term($winbinddpid);
  95
  96         $count = 0;
  97         until ($count > 10) {
  98             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  99             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
 100             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
 101             if ($smbdchild == -1
 102                 && $nmbdchild == -1
 103                 && $winbinddchild == -1) {
 104                 last;
 105             }
 106             sleep(1);
 107             $count++;
 108         }
 109
 110         if ($count <= 10 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
 111             return;
 112         }
 113
 114         warn("timelimit process did not quit on SIGTERM, sending SIGKILL");
 115         $self->stop_sig_kill($smbdpid);
 116         $self->stop_sig_kill($nmbdpid);
 117         $self->stop_sig_kill($winbinddpid);
 118
 119         return 0;
 120 }
 121
 122 sub getlog_env_app($$$)
 123 {
 124         my ($self, $envvars, $name) = @_;
 125
 126         my $title = "$name LOG of: $envvars->{NETBIOSNAME}\n";
 127         my $out = $title;
 128
 129         open(LOG, "<".$envvars->{$name."_TEST_LOG"});
 130
 131         seek(LOG, $envvars->{$name."_TEST_LOG_POS"}, SEEK_SET);
 132         while (<LOG>) {
 133                 $out .= $_;
 134         }
 135         $envvars->{$name."_TEST_LOG_POS"} = tell(LOG);
 136         close(LOG);
 137
 138         return "" if $out eq $title;
 139
 140         return $out;
 141 }
 142
 143 sub getlog_env($$)
 144 {
 145         my ($self, $envvars) = @_;
 146         my $ret = "";
 147
 148         $ret .= $self->getlog_env_app($envvars, "SMBD");
 149         $ret .= $self->getlog_env_app($envvars, "NMBD");
 150         $ret .= $self->getlog_env_app($envvars, "WINBINDD");
 151
 152         return $ret;
 153 }
 154
 155 sub check_env($$)
 156 {
 157         my ($self, $envvars) = @_;
 158
 159         my $childpid = waitpid(-1, WNOHANG);
 160
 161         # TODO ...
 162         return 1;
 163 }
 164
 165 sub setup_env($$$)
 166 {
 167         my ($self, $envname, $path) = @_;
 168
 169         $ENV{ENVNAME} = $envname;
 170
 171         if (defined($self->{vars}->{$envname})) {
 172                 return $self->{vars}->{$envname};
 173         }
 174
 175         if ($envname eq "nt4_dc") {
 176                 return $self->setup_nt4_dc("$path/nt4_dc");
 177         } elsif ($envname eq "nt4_dc_schannel") {
 178                 return $self->setup_nt4_dc_schannel("$path/nt4_dc_schannel");
 179         } elsif ($envname eq "simpleserver") {
 180                 return $self->setup_simpleserver("$path/simpleserver");
 181         } elsif ($envname eq "fileserver") {
 182                 return $self->setup_fileserver("$path/fileserver");
 183         } elsif ($envname eq "maptoguest") {
 184                 return $self->setup_maptoguest("$path/maptoguest");
 185         } elsif ($envname eq "ktest") {
 186                 return $self->setup_ktest("$path/ktest");
 187         } elsif ($envname eq "nt4_member") {
 188                 if (not defined($self->{vars}->{nt4_dc})) {
 189                         if (not defined($self->setup_nt4_dc("$path/nt4_dc"))) {
 190                                 return undef;
 191                         }
 192                 }
 193                 return $self->setup_nt4_member("$path/nt4_member", $self->{vars}->{nt4_dc});
 194         } else {
 195                 return "UNKNOWN";
 196         }
 197 }
 198
 199 sub setup_nt4_dc($$)
 200 {
 201         my ($self, $path) = @_;
 202
 203         print "PROVISIONING NT4 DC...";
 204
 205         my $nt4_dc_options = "
 206         domain master = yes
 207         domain logons = yes
 208         lanman auth = yes
 209
 210         rpc_server:epmapper = external
 211         rpc_server:spoolss = external
 212         rpc_server:lsarpc = external
 213         rpc_server:samr = external
 214         rpc_server:netlogon = external
 215         rpc_server:register_embedded_np = yes
 216         rpc_server:FssagentRpc = external
 217
 218         rpc_daemon:epmd = fork
 219         rpc_daemon:spoolssd = fork
 220         rpc_daemon:lsasd = fork
 221         rpc_daemon:fssd = fork
 222         fss: sequence timeout = 1
 223 ";
 224
 225         my $vars = $self->provision($path,
 226                                     "LOCALNT4DC2",
 227                                     "localntdc2pass",
 228                                     $nt4_dc_options);
 229
 230         $vars or return undef;
 231
 232         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 233                return undef;
 234         }
 235
 236         $vars->{DC_SERVER} = $vars->{SERVER};
 237         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 238         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 239         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 240         $vars->{DC_USERNAME} = $vars->{USERNAME};
 241         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 242
 243         $self->{vars}->{nt4_dc} = $vars;
 244
 245         return $vars;
 246 }
 247
 248 sub setup_nt4_dc_schannel($$)
 249 {
 250         my ($self, $path) = @_;
 251
 252         print "PROVISIONING NT4 DC WITH SERVER SCHANNEL ...";
 253
 254         my $pdc_options = "
 255         domain master = yes
 256         domain logons = yes
 257         lanman auth = yes
 258
 259         rpc_server:epmapper = external
 260         rpc_server:spoolss = external
 261         rpc_server:lsarpc = external
 262         rpc_server:samr = external
 263         rpc_server:netlogon = external
 264         rpc_server:register_embedded_np = yes
 265
 266         rpc_daemon:epmd = fork
 267         rpc_daemon:spoolssd = fork
 268         rpc_daemon:lsasd = fork
 269
 270         server schannel = yes
 271 ";
 272
 273         my $vars = $self->provision($path,
 274                                     "LOCALNT4DC9",
 275                                     "localntdc9pass",
 276                                     $pdc_options);
 277
 278         $vars or return undef;
 279
 280         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 281                return undef;
 282         }
 283
 284         $vars->{DC_SERVER} = $vars->{SERVER};
 285         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 286         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 287         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 288         $vars->{DC_USERNAME} = $vars->{USERNAME};
 289         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 290
 291         $self->{vars}->{nt4_dc_schannel} = $vars;
 292
 293         return $vars;
 294 }
 295
 296 sub setup_nt4_member($$$)
 297 {
 298         my ($self, $prefix, $nt4_dc_vars) = @_;
 299         my $count = 0;
 300         my $rc;
 301
 302         print "PROVISIONING MEMBER...";
 303
 304         my $member_options = "
 305         security = domain
 306         server signing = on
 307         dbwrap_tdb_mutexes:* = yes
 308 ";
 309         my $ret = $self->provision($prefix,
 310                                    "LOCALNT4MEMBER3",
 311                                    "localnt4member3pass",
 312                                    $member_options);
 313
 314         $ret or return undef;
 315
 316         my $nmblookup = Samba::bindir_path($self, "nmblookup");
 317         do {
 318                 print "Waiting for the LOGON SERVER registration ...\n";
 319                 $rc = system("$nmblookup $ret->{CONFIGURATION} $ret->{DOMAIN}\#1c");
 320                 if ($rc != 0) {
 321                         sleep(1);
 322                 }
 323                 $count++;
 324         } while ($rc != 0 && $count < 10);
 325         if ($count == 10) {
 326                 print "NMBD not reachable after 10 retries\n";
 327                 teardown_env($self, $ret);
 328                 return 0;
 329         }
 330
 331         my $net = Samba::bindir_path($self, "net");
 332         my $cmd = "";
 333         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 334         $cmd .= "$net join $ret->{CONFIGURATION} $nt4_dc_vars->{DOMAIN} member";
 335         $cmd .= " -U$nt4_dc_vars->{USERNAME}\%$nt4_dc_vars->{PASSWORD}";
 336
 337         if (system($cmd) != 0) {
 338             warn("Join failed\n$cmd");
 339             return undef;
 340         }
 341
 342         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 343                return undef;
 344         }
 345
 346         $ret->{DC_SERVER} = $nt4_dc_vars->{SERVER};
 347         $ret->{DC_SERVER_IP} = $nt4_dc_vars->{SERVER_IP};
 348         $ret->{DC_SERVER_IPV6} = $nt4_dc_vars->{SERVER_IPV6};
 349         $ret->{DC_NETBIOSNAME} = $nt4_dc_vars->{NETBIOSNAME};
 350         $ret->{DC_USERNAME} = $nt4_dc_vars->{USERNAME};
 351         $ret->{DC_PASSWORD} = $nt4_dc_vars->{PASSWORD};
 352
 353         return $ret;
 354 }
 355
 356 sub setup_admember($$$$)
 357 {
 358         my ($self, $prefix, $dcvars) = @_;
 359
 360         # If we didn't build with ADS, pretend this env was never available
 361         if (not $self->have_ads()) {
 362                 return "UNKNOWN";
 363         }
 364
 365         print "PROVISIONING S3 AD MEMBER...";
 366
 367         my $member_options = "
 368         security = ads
 369         server signing = on
 370         workgroup = $dcvars->{DOMAIN}
 371         realm = $dcvars->{REALM}
 372 ";
 373
 374         my $ret = $self->provision($prefix,
 375                                    "LOCALADMEMBER",
 376                                    "loCalMemberPass",
 377                                    $member_options,
 378                                    $dcvars->{SERVER_IP},
 379                                    $dcvars->{SERVER_IPV6});
 380
 381         $ret or return undef;
 382
 383         close(USERMAP);
 384         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 385         $ret->{REALM} = $dcvars->{REALM};
 386
 387         my $ctx;
 388         my $prefix_abs = abs_path($prefix);
 389         $ctx = {};
 390         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 391         $ctx->{domain} = $dcvars->{DOMAIN};
 392         $ctx->{realm} = $dcvars->{REALM};
 393         $ctx->{dnsname} = lc($dcvars->{REALM});
 394         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 395         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 396         Samba::mk_krb5_conf($ctx, "");
 397
 398         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 399
 400         my $net = Samba::bindir_path($self, "net");
 401         my $cmd = "";
 402         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 403         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 404                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 405         } else {
 406                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 407         }
 408         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 409         $cmd .= "$net join $ret->{CONFIGURATION}";
 410         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 411
 412         if (system($cmd) != 0) {
 413             warn("Join failed\n$cmd");
 414             return undef;
 415         }
 416
 417         # We need world access to this share, as otherwise the domain
 418         # administrator from the AD domain provided by Samba4 can't
 419         # access the share for tests.
 420         chmod 0777, "$prefix/share";
 421
 422         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 423                 return undef;
 424         }
 425
 426         $ret->{DC_SERVER} = $dcvars->{SERVER};
 427         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 428         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 429         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 430         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 431         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 432
 433         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 434         $ret->{target} = $self;
 435
 436         return $ret;
 437 }
 438
 439 sub setup_admember_rfc2307($$$$)
 440 {
 441         my ($self, $prefix, $dcvars) = @_;
 442
 443         # If we didn't build with ADS, pretend this env was never available
 444         if (not $self->have_ads()) {
 445                 return "UNKNOWN";
 446         }
 447
 448         print "PROVISIONING S3 AD MEMBER WITH idmap_rfc2307 config...";
 449
 450         my $member_options = "
 451         security = ads
 452         server signing = on
 453         workgroup = $dcvars->{DOMAIN}
 454         realm = $dcvars->{REALM}
 455         idmap config $dcvars->{DOMAIN} : backend = rfc2307
 456         idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
 457         idmap config $dcvars->{DOMAIN} : ldap_server = ad
 458         idmap config $dcvars->{DOMAIN} : bind_path_user = ou=idmap,dc=samba,dc=example,dc=com
 459         idmap config $dcvars->{DOMAIN} : bind_path_group = ou=idmap,dc=samba,dc=example,dc=com
 460 ";
 461
 462         my $ret = $self->provision($prefix,
 463                                    "RFC2307MEMBER",
 464                                    "loCalMemberPass",
 465                                    $member_options,
 466                                    $dcvars->{SERVER_IP},
 467                                    $dcvars->{SERVER_IPV6});
 468
 469         $ret or return undef;
 470
 471         close(USERMAP);
 472         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 473         $ret->{REALM} = $dcvars->{REALM};
 474
 475         my $ctx;
 476         my $prefix_abs = abs_path($prefix);
 477         $ctx = {};
 478         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 479         $ctx->{domain} = $dcvars->{DOMAIN};
 480         $ctx->{realm} = $dcvars->{REALM};
 481         $ctx->{dnsname} = lc($dcvars->{REALM});
 482         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 483         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 484         Samba::mk_krb5_conf($ctx, "");
 485
 486         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 487
 488         my $net = Samba::bindir_path($self, "net");
 489         my $cmd = "";
 490         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 491         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 492                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 493         } else {
 494                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 495         }
 496         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 497         $cmd .= "$net join $ret->{CONFIGURATION}";
 498         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 499
 500         if (system($cmd) != 0) {
 501             warn("Join failed\n$cmd");
 502             return undef;
 503         }
 504
 505         # We need world access to this share, as otherwise the domain
 506         # administrator from the AD domain provided by Samba4 can't
 507         # access the share for tests.
 508         chmod 0777, "$prefix/share";
 509
 510         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 511                 return undef;
 512         }
 513
 514         $ret->{DC_SERVER} = $dcvars->{SERVER};
 515         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 516         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 517         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 518         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 519         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 520
 521         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 522         $ret->{target} = $self;
 523
 524         return $ret;
 525 }
 526
 527 sub setup_simpleserver($$)
 528 {
 529         my ($self, $path) = @_;
 530
 531         print "PROVISIONING simple server...";
 532
 533         my $prefix_abs = abs_path($path);
 534
 535         my $simpleserver_options = "
 536         lanman auth = yes
 537         vfs objects = xattr_tdb streams_depot
 538
 539 [vfs_aio_fork]
 540         path = $prefix_abs/share
 541         vfs objects = aio_fork
 542         read only = no
 543         vfs_aio_fork:erratic_testing_mode=yes
 544 ";
 545
 546         my $vars = $self->provision($path,
 547                                     "LOCALSHARE4",
 548                                     "local4pass",
 549                                     $simpleserver_options);
 550
 551         $vars or return undef;
 552
 553         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 554                return undef;
 555         }
 556
 557         $self->{vars}->{simpleserver} = $vars;
 558
 559         return $vars;
 560 }
 561
 562 sub setup_fileserver($$)
 563 {
 564         my ($self, $path) = @_;
 565         my $prefix_abs = abs_path($path);
 566
 567         print "PROVISIONING file server ...\n";
 568
 569         my @dirs = ();
 570
 571         mkdir($prefix_abs, 0777);
 572
 573         my $share_dir="$prefix_abs/share";
 574
 575         # Create share directory structure
 576         my $lower_case_share_dir="$share_dir/lower-case";
 577         push(@dirs, $lower_case_share_dir);
 578
 579         my $lower_case_share_dir_30000="$share_dir/lower-case-30000";
 580         push(@dirs, $lower_case_share_dir_30000);
 581
 582         my $fileserver_options = "
 583 [lowercase]
 584         path = $lower_case_share_dir
 585         comment = smb username is [%U]
 586         case sensitive = True
 587         default case = lower
 588         preserve case = no
 589         short preserve case = no
 590 [lowercase-30000]
 591         path = $lower_case_share_dir_30000
 592         comment = smb username is [%U]
 593         case sensitive = True
 594         default case = lower
 595         preserve case = no
 596         short preserve case = no
 597         ";
 598
 599         my $vars = $self->provision($path,
 600                                     "FILESERVER",
 601                                     "fileserver_secret",
 602                                     $fileserver_options,
 603                                     undef,
 604                                     undef,
 605                                     1);
 606
 607         $vars or return undef;
 608
 609         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 610                return undef;
 611         }
 612
 613         $self->{vars}->{fileserver} = $vars;
 614
 615         mkdir($_, 0777) foreach(@dirs);
 616
 617         ## Create case sensitive lower case share dir
 618         foreach my $file ('a'..'z') {
 619                 my $full_path = $lower_case_share_dir . '/' . $file;
 620                 open my $fh, '>', $full_path;
 621                 # Add some content to file
 622                 print $fh $full_path;
 623                 close $fh;
 624         }
 625
 626         for (my $file = 1; $file < 51; ++$file) {
 627                 my $full_path = $lower_case_share_dir . '/' . $file;
 628                 open my $fh, '>', $full_path;
 629                 # Add some content to file
 630                 print $fh $full_path;
 631                 close $fh;
 632         }
 633
 634         # Create content for 30000 share
 635         foreach my $file ('a'..'z') {
 636                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
 637                 open my $fh, '>', $full_path;
 638                 # Add some content to file
 639                 print $fh $full_path;
 640                 close $fh;
 641         }
 642
 643         for (my $file = 1; $file < 30001; ++$file) {
 644                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
 645                 open my $fh, '>', $full_path;
 646                 # Add some content to file
 647                 print $fh $full_path;
 648                 close $fh;
 649         }
 650
 651         return $vars;
 652 }
 653
 654 sub setup_ktest($$$)
 655 {
 656         my ($self, $prefix) = @_;
 657
 658         # If we didn't build with ADS, pretend this env was never available
 659         if (not $self->have_ads()) {
 660                 return "UNKNOWN";
 661         }
 662
 663         print "PROVISIONING server with security=ads...";
 664
 665         my $ktest_options = "
 666         workgroup = KTEST
 667         realm = ktest.samba.example.com
 668         security = ads
 669         username map = $prefix/lib/username.map
 670         server signing = required
 671 ";
 672
 673         my $ret = $self->provision($prefix,
 674                                    "LOCALKTEST6",
 675                                    "localktest6pass",
 676                                    $ktest_options);
 677
 678         $ret or return undef;
 679
 680         my $ctx;
 681         my $prefix_abs = abs_path($prefix);
 682         $ctx = {};
 683         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 684         $ctx->{domain} = "KTEST";
 685         $ctx->{realm} = "KTEST.SAMBA.EXAMPLE.COM";
 686         $ctx->{dnsname} = lc($ctx->{realm});
 687         $ctx->{kdc_ipv4} = "0.0.0.0";
 688         $ctx->{kdc_ipv6} = "::";
 689         Samba::mk_krb5_conf($ctx, "");
 690
 691         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 692
 693         open(USERMAP, ">$prefix/lib/username.map") or die("Unable to open $prefix/lib/username.map");
 694         print USERMAP "
 695 $ret->{USERNAME} = KTEST\\Administrator
 696 ";
 697         close(USERMAP);
 698
 699 #This is the secrets.tdb created by 'net ads join' from Samba3 to a
 700 #Samba4 DC with the same parameters as are being used here.  The
 701 #domain SID is S-1-5-21-1071277805-689288055-3486227160
 702
 703         system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb $prefix/private/secrets.tdb");
 704         chmod 0600, "$prefix/private/secrets.tdb";
 705
 706 #Make sure there's no old ntdb file.
 707         system("rm -f $prefix/private/secrets.ntdb");
 708
 709 #This uses a pre-calculated krb5 credentials cache, obtained by running Samba4 with:
 710 # "--option=kdc:service ticket lifetime=239232" "--option=kdc:user ticket lifetime=239232" "--option=kdc:renewal lifetime=239232"
 711 #
 712 #and having in krb5.conf:
 713 # ticket_lifetime = 799718400
 714 # renew_lifetime = 799718400
 715 #
 716 # The commands for the -2 keytab where were:
 717 # kinit administrator@KTEST.SAMBA.EXAMPLE.COM
 718 # kvno host/localktest6@KTEST.SAMBA.EXAMPLE.COM
 719 # kvno cifs/localktest6@KTEST.SAMBA.EXAMPLE.COM
 720 # kvno host/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 721 # kvno cifs/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 722 #
 723 # and then for the -3 keytab, I did
 724 #
 725 # net changetrustpw; kdestroy and the same again.
 726 #
 727 # This creates a credential cache with a very long lifetime (2036 at
 728 # at 2011-04), and shows that running 'net changetrustpw' does not
 729 # break existing logins (for the secrets.tdb method at least).
 730 #
 731
 732         $ret->{KRB5_CCACHE}="FILE:$prefix/krb5_ccache";
 733
 734         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-2 $prefix/krb5_ccache-2");
 735         chmod 0600, "$prefix/krb5_ccache-2";
 736
 737         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-3 $prefix/krb5_ccache-3");
 738         chmod 0600, "$prefix/krb5_ccache-3";
 739
 740         # We need world access to this share, as otherwise the domain
 741         # administrator from the AD domain provided by ktest can't
 742         # access the share for tests.
 743         chmod 0777, "$prefix/share";
 744
 745         if (not $self->check_or_start($ret, "yes", "no", "yes")) {
 746                return undef;
 747         }
 748         return $ret;
 749 }
 750
 751 sub setup_maptoguest($$)
 752 {
 753         my ($self, $path) = @_;
 754
 755         print "PROVISIONING maptoguest...";
 756
 757         my $options = "
 758 map to guest = bad user
 759 ";
 760
 761         my $vars = $self->provision($path,
 762                                     "maptoguest",
 763                                     "maptoguestpass",
 764                                     $options);
 765
 766         $vars or return undef;
 767
 768         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 769                return undef;
 770         }
 771
 772         $self->{vars}->{s3maptoguest} = $vars;
 773
 774         return $vars;
 775 }
 776
 777 sub stop_sig_term($$) {
 778         my ($self, $pid) = @_;
 779         kill("USR1", $pid) or kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 780 }
 781
 782 sub stop_sig_kill($$) {
 783         my ($self, $pid) = @_;
 784         kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 785 }
 786
 787 sub write_pid($$$)
 788 {
 789         my ($env_vars, $app, $pid) = @_;
 790
 791         open(PID, ">$env_vars->{PIDDIR}/timelimit.$app.pid");
 792         print PID $pid;
 793         close(PID);
 794 }
 795
 796 sub read_pid($$)
 797 {
 798         my ($env_vars, $app) = @_;
 799
 800         open(PID, "<$env_vars->{PIDDIR}/timelimit.$app.pid");
 801         my $pid = <PID>;
 802         close(PID);
 803         return $pid;
 804 }
 805
 806 sub check_or_start($$$$$) {
 807         my ($self, $env_vars, $nmbd, $winbindd, $smbd) = @_;
 808
 809         # use a pipe for stdin in the child processes. This allows
 810         # those processes to monitor the pipe for EOF to ensure they
 811         # exit when the test script exits
 812         pipe(STDIN_READER, $env_vars->{STDIN_PIPE});
 813
 814         unlink($env_vars->{NMBD_TEST_LOG});
 815         print "STARTING NMBD...";
 816         my $pid = fork();
 817         if ($pid == 0) {
 818                 open STDOUT, ">$env_vars->{NMBD_TEST_LOG}";
 819                 open STDERR, '>&STDOUT';
 820
 821                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 822
 823                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 824                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 825                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 826
 827                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 828                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 829                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 830                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 831                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 832                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 833
 834                 $ENV{ENVNAME} = "$ENV{ENVNAME}.nmbd";
 835
 836                 if ($nmbd ne "yes") {
 837                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 838                                 my $signame = shift;
 839                                 print("Skip nmbd received signal $signame");
 840                                 exit 0;
 841                         };
 842                         sleep($self->{server_maxtime});
 843                         exit 0;
 844                 }
 845
 846                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
 847                 my @optargs = ("-d0");
 848                 if (defined($ENV{NMBD_OPTIONS})) {
 849                         @optargs = split(/ /, $ENV{NMBD_OPTIONS});
 850                 }
 851                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 852                 if(defined($ENV{NMBD_VALGRIND})) {
 853                         @preargs = split(/ /, $ENV{NMBD_VALGRIND});
 854                 }
 855                 my @args = ("-F", "--no-process-group",
 856                             "-s", $env_vars->{SERVERCONFFILE},
 857                             "-l", $env_vars->{LOGDIR});
 858                 if (not defined($ENV{NMBD_DONT_LOG_STDOUT})) {
 859                         push(@args, "--log-stdout");
 860                 }
 861
 862                 close($env_vars->{STDIN_PIPE});
 863                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 864
 865                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
 866                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
 867         }
 868         $env_vars->{NMBD_TL_PID} = $pid;
 869         write_pid($env_vars, "nmbd", $pid);
 870         print "DONE\n";
 871
 872         unlink($env_vars->{WINBINDD_TEST_LOG});
 873         print "STARTING WINBINDD...";
 874         $pid = fork();
 875         if ($pid == 0) {
 876                 open STDOUT, ">$env_vars->{WINBINDD_TEST_LOG}";
 877                 open STDERR, '>&STDOUT';
 878
 879                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 880
 881                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 882                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 883                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 884
 885                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 886                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 887                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 888                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 889                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 890                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 891                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
 892                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
 893                 } else {
 894                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
 895                 }
 896
 897                 $ENV{ENVNAME} = "$ENV{ENVNAME}.winbindd";
 898
 899                 if ($winbindd ne "yes") {
 900                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 901                                 my $signame = shift;
 902                                 print("Skip winbindd received signal $signame");
 903                                 exit 0;
 904                         };
 905                         sleep($self->{server_maxtime});
 906                         exit 0;
 907                 }
 908
 909                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
 910                 my @optargs = ("-d0");
 911                 if (defined($ENV{WINBINDD_OPTIONS})) {
 912                         @optargs = split(/ /, $ENV{WINBINDD_OPTIONS});
 913                 }
 914                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 915                 if(defined($ENV{WINBINDD_VALGRIND})) {
 916                         @preargs = split(/ /, $ENV{WINBINDD_VALGRIND});
 917                 }
 918                 my @args = ("-F", "--no-process-group",
 919                             "-s", $env_vars->{SERVERCONFFILE},
 920                             "-l", $env_vars->{LOGDIR});
 921                 if (not defined($ENV{WINBINDD_DONT_LOG_STDOUT})) {
 922                         push(@args, "--stdout");
 923                 }
 924
 925                 close($env_vars->{STDIN_PIPE});
 926                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 927
 928                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
 929                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
 930         }
 931         $env_vars->{WINBINDD_TL_PID} = $pid;
 932         write_pid($env_vars, "winbindd", $pid);
 933         print "DONE\n";
 934
 935         unlink($env_vars->{SMBD_TEST_LOG});
 936         print "STARTING SMBD...";
 937         $pid = fork();
 938         if ($pid == 0) {
 939                 open STDOUT, ">$env_vars->{SMBD_TEST_LOG}";
 940                 open STDERR, '>&STDOUT';
 941
 942                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 943
 944                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 945                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 946                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 947
 948                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 949                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 950                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 951                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 952                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 953                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 954                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
 955                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
 956                 } else {
 957                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
 958                 }
 959
 960                 $ENV{ENVNAME} = "$ENV{ENVNAME}.smbd";
 961
 962                 if ($smbd ne "yes") {
 963                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 964                                 my $signame = shift;
 965                                 print("Skip smbd received signal $signame");
 966                                 exit 0;
 967                         };
 968                         sleep($self->{server_maxtime});
 969                         exit 0;
 970                 }
 971
 972                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "smbd");
 973                 my @optargs = ("-d0");
 974                 if (defined($ENV{SMBD_OPTIONS})) {
 975                         @optargs = split(/ /, $ENV{SMBD_OPTIONS});
 976                 }
 977                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 978                 if(defined($ENV{SMBD_VALGRIND})) {
 979                         @preargs = split(/ /,$ENV{SMBD_VALGRIND});
 980                 }
 981                 my @args = ("-F", "--no-process-group",
 982                             "-s", $env_vars->{SERVERCONFFILE},
 983                             "-l", $env_vars->{LOGDIR});
 984                 if (not defined($ENV{SMBD_DONT_LOG_STDOUT})) {
 985                         push(@args, "--log-stdout");
 986                 }
 987
 988                 close($env_vars->{STDIN_PIPE});
 989                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 990
 991                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
 992                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
 993         }
 994         $env_vars->{SMBD_TL_PID} = $pid;
 995         write_pid($env_vars, "smbd", $pid);
 996         print "DONE\n";
 997
 998         close(STDIN_READER);
 999
1000         return $self->wait_for_start($env_vars, $nmbd, $winbindd, $smbd);
1001 }
1002
1003 sub provision($$$$$$$$)
1004 {
1005         my ($self, $prefix, $server, $password, $extra_options, $dc_server_ip, $dc_server_ipv6, $no_delete_prefix) = @_;
1006
1007         ##
1008         ## setup the various environment variables we need
1009         ##
1010
1011         my $swiface = Samba::get_interface($server);
1012         my %ret = ();
1013         my $server_ip = "127.0.0.$swiface";
1014         my $server_ipv6 = sprintf("fd00:0000:0000:0000:0000:0000:5357:5f%02x", $swiface);
1015         my $domain = "SAMBA-TEST";
1016
1017         my $unix_name = ($ENV{USER} or $ENV{LOGNAME} or `PATH=/usr/ucb:$ENV{PATH} whoami`);
1018         chomp $unix_name;
1019         my $unix_uid = $>;
1020         my $unix_gids_str = $);
1021         my @unix_gids = split(" ", $unix_gids_str);
1022
1023         my $prefix_abs = abs_path($prefix);
1024         my $bindir_abs = abs_path($self->{bindir});
1025
1026         my @dirs = ();
1027
1028         my $shrdir="$prefix_abs/share";
1029         push(@dirs,$shrdir);
1030
1031         my $libdir="$prefix_abs/lib";
1032         push(@dirs,$libdir);
1033
1034         my $piddir="$prefix_abs/pid";
1035         push(@dirs,$piddir);
1036
1037         my $privatedir="$prefix_abs/private";
1038         push(@dirs,$privatedir);
1039
1040         my $lockdir="$prefix_abs/lockdir";
1041         push(@dirs,$lockdir);
1042
1043         my $eventlogdir="$prefix_abs/lockdir/eventlog";
1044         push(@dirs,$eventlogdir);
1045
1046         my $logdir="$prefix_abs/logs";
1047         push(@dirs,$logdir);
1048
1049         my $driver32dir="$shrdir/W32X86";
1050         push(@dirs,$driver32dir);
1051
1052         my $driver64dir="$shrdir/x64";
1053         push(@dirs,$driver64dir);
1054
1055         my $driver40dir="$shrdir/WIN40";
1056         push(@dirs,$driver40dir);
1057
1058         my $ro_shrdir="$shrdir/root-tmp";
1059         push(@dirs,$ro_shrdir);
1060
1061         my $msdfs_shrdir="$shrdir/msdfsshare";
1062         push(@dirs,$msdfs_shrdir);
1063
1064         my $msdfs_deeppath="$msdfs_shrdir/deeppath";
1065         push(@dirs,$msdfs_deeppath);
1066
1067         my $badnames_shrdir="$shrdir/badnames";
1068         push(@dirs,$badnames_shrdir);
1069
1070         my $lease1_shrdir="$shrdir/SMB2_10";
1071         push(@dirs,$lease1_shrdir);
1072
1073         my $lease2_shrdir="$shrdir/SMB3_00";
1074         push(@dirs,$lease2_shrdir);
1075
1076         my $manglenames_shrdir="$shrdir/manglenames";
1077         push(@dirs,$manglenames_shrdir);
1078
1079         # this gets autocreated by winbindd
1080         my $wbsockdir="$prefix_abs/winbindd";
1081         my $wbsockprivdir="$lockdir/winbindd_privileged";
1082
1083         my $nmbdsockdir="$prefix_abs/nmbd";
1084         unlink($nmbdsockdir);
1085
1086         ##
1087         ## create the test directory layout
1088         ##
1089         die ("prefix_abs = ''") if $prefix_abs eq "";
1090         die ("prefix_abs = '/'") if $prefix_abs eq "/";
1091
1092         mkdir($prefix_abs, 0777);
1093         print "CREATE TEST ENVIRONMENT IN '$prefix'...";
1094         if (not defined($no_delete_prefix) or not $no_delete_prefix) {
1095             system("rm -rf $prefix_abs/*");
1096         }
1097         mkdir($_, 0777) foreach(@dirs);
1098
1099         my $fs_specific_conf = $self->get_fs_specific_conf($shrdir);
1100
1101         ##
1102         ## lockdir and piddir must be 0755
1103         ##
1104         chmod 0755, $lockdir;
1105         chmod 0755, $piddir;
1106
1107
1108         ##
1109         ## create ro and msdfs share layout
1110         ##
1111
1112         chmod 0755, $ro_shrdir;
1113         my $unreadable_file = "$ro_shrdir/unreadable_file";
1114         unless (open(UNREADABLE_FILE, ">$unreadable_file")) {
1115                 warn("Unable to open $unreadable_file");
1116                 return undef;
1117         }
1118         close(UNREADABLE_FILE);
1119         chmod 0600, $unreadable_file;
1120
1121         my $msdfs_target = "$ro_shrdir/msdfs-target";
1122         unless (open(MSDFS_TARGET, ">$msdfs_target")) {
1123                 warn("Unable to open $msdfs_target");
1124                 return undef;
1125         }
1126         close(MSDFS_TARGET);
1127         chmod 0666, $msdfs_target;
1128         symlink "msdfs:$server_ip\\ro-tmp,$server_ipv6\\ro-tmp",
1129                 "$msdfs_shrdir/msdfs-src1";
1130         symlink "msdfs:$server_ipv6\\ro-tmp", "$msdfs_shrdir/deeppath/msdfs-src2";
1131
1132         ##
1133         ## create bad names in $badnames_shrdir
1134         ##
1135         ## (An invalid name, would be mangled to 8.3).
1136         my $badname_target = "$badnames_shrdir/\340|\231\216\377\177";
1137         unless (open(BADNAME_TARGET, ">$badname_target")) {
1138                 warn("Unable to open $badname_target");
1139                 return undef;
1140         }
1141         close(BADNAME_TARGET);
1142         chmod 0666, $badname_target;
1143
1144         ## (A bad name, would not be mangled to 8.3).
1145         my $badname_target = "$badnames_shrdir/\240\276\346\327\377\177";
1146         unless (open(BADNAME_TARGET, ">$badname_target")) {
1147                 warn("Unable to open $badname_target");
1148                 return undef;
1149         }
1150         close(BADNAME_TARGET);
1151         chmod 0666, $badname_target;
1152
1153         ## (A bad good name).
1154         my $badname_target = "$badnames_shrdir/blank.txt";
1155         unless (open(BADNAME_TARGET, ">$badname_target")) {
1156                 warn("Unable to open $badname_target");
1157                 return undef;
1158         }
1159         close(BADNAME_TARGET);
1160         chmod 0666, $badname_target;
1161
1162         ##
1163         ## create mangleable directory names in $manglenames_shrdir
1164         ##
1165         my $manglename_target = "$manglenames_shrdir/foo:bar";
1166         mkdir($manglename_target, 0777);
1167
1168         my $conffile="$libdir/server.conf";
1169
1170         my $nss_wrapper_pl = "$ENV{PERL} $self->{srcdir}/lib/nss_wrapper/nss_wrapper.pl";
1171         my $nss_wrapper_passwd = "$privatedir/passwd";
1172         my $nss_wrapper_group = "$privatedir/group";
1173         my $nss_wrapper_hosts = "$ENV{SELFTEST_PREFIX}/hosts";
1174         my $resolv_conf = "$privatedir/resolv.conf";
1175         my $dns_host_file = "$ENV{SELFTEST_PREFIX}/dns_host_file";
1176
1177         my $mod_printer_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/printing/modprinter.pl";
1178
1179         my $fake_snap_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/fake_snap.pl";
1180
1181         my @eventlog_list = ("dns server", "application");
1182
1183         ##
1184         ## calculate uids and gids
1185         ##
1186
1187         my ($max_uid, $max_gid);
1188         my ($uid_nobody, $uid_root, $uid_pdbtest, $uid_pdbtest2);
1189         my ($gid_nobody, $gid_nogroup, $gid_root, $gid_domusers, $gid_domadmins);
1190
1191         if ($unix_uid < 0xffff - 4) {
1192                 $max_uid = 0xffff;
1193         } else {
1194                 $max_uid = $unix_uid;
1195         }
1196
1197         $uid_root = $max_uid - 1;
1198         $uid_nobody = $max_uid - 2;
1199         $uid_pdbtest = $max_uid - 3;
1200         $uid_pdbtest2 = $max_uid - 4;
1201
1202         if ($unix_gids[0] < 0xffff - 5) {
1203                 $max_gid = 0xffff;
1204         } else {
1205                 $max_gid = $unix_gids[0];
1206         }
1207
1208         $gid_nobody = $max_gid - 1;
1209         $gid_nogroup = $max_gid - 2;
1210         $gid_root = $max_gid - 3;
1211         $gid_domusers = $max_gid - 4;
1212         $gid_domadmins = $max_gid - 5;
1213
1214         ##
1215         ## create conffile
1216         ##
1217
1218         unless (open(CONF, ">$conffile")) {
1219                 warn("Unable to open $conffile");
1220                 return undef;
1221         }
1222         print CONF "
1223 [global]
1224         netbios name = $server
1225         interfaces = $server_ip/8 $server_ipv6/64
1226         bind interfaces only = yes
1227         panic action = cd $self->{srcdir} && $self->{srcdir}/selftest/gdb_backtrace %d %\$(MAKE_TEST_BINARY)
1228         smbd:suicide mode = yes
1229
1230         workgroup = $domain
1231
1232         private dir = $privatedir
1233         pid directory = $piddir
1234         lock directory = $lockdir
1235         log file = $logdir/log.\%m
1236         log level = 1
1237         debug pid = yes
1238         max log size = 0
1239
1240         state directory = $lockdir
1241         cache directory = $lockdir
1242
1243         passdb backend = tdbsam
1244
1245         time server = yes
1246
1247         add user script =               $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1248         add group script =              $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action add --name %g
1249         add machine script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1250         add user to group script =      $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action add --member %u --name %g --group_path $nss_wrapper_group
1251         delete user script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action delete --name %u
1252         delete group script =           $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action delete --name %g
1253         delete user from group script = $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action delete --member %u --name %g --group_path $nss_wrapper_group
1254
1255         addprinter command =            $mod_printer_pl -a -s $conffile --
1256         deleteprinter command =         $mod_printer_pl -d -s $conffile --
1257
1258         eventlog list = application \"dns server\"
1259
1260         kernel oplocks = no
1261         kernel change notify = no
1262         smb2 leases = yes
1263
1264         logging = file
1265         printing = bsd
1266         printcap name = /dev/null
1267
1268         winbindd socket directory = $wbsockdir
1269         nmbd:socket dir = $nmbdsockdir
1270         idmap config * : range = 100000-200000
1271         winbind enum users = yes
1272         winbind enum groups = yes
1273         winbind separator = /
1274
1275 #       min receivefile size = 4000
1276
1277         read only = no
1278         server signing = auto
1279
1280         smbd:sharedelay = 100000
1281         smbd:writetimeupdatedelay = 500000
1282         map hidden = no
1283         map system = no
1284         map readonly = no
1285         store dos attributes = yes
1286         create mask = 755
1287         dos filemode = yes
1288         strict rename = yes
1289         vfs objects = acl_xattr fake_acls xattr_tdb streams_depot
1290
1291         printing = vlp
1292         print command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb print %p %s
1293         lpq command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpq %p
1294         lp rm command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lprm %p %j
1295         lp pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lppause %p %j
1296         lp resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpresume %p %j
1297         queue pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queuepause %p
1298         queue resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queueresume %p
1299         lpq cache time = 0
1300         print notify backchannel = yes
1301
1302         ncalrpc dir = $prefix_abs/ncalrpc
1303
1304         # The samba3.blackbox.smbclient_s3 test uses this to test that
1305         # sending messages works, and that the %m sub works.
1306         message command = mv %s $shrdir/message.%m
1307
1308         # fsrvp server requires registry shares
1309         registry shares = yes
1310
1311         # Used by RPC SRVSVC tests
1312         add share command = $bindir_abs/smbaddshare
1313         change share command = $bindir_abs/smbchangeshare
1314         delete share command = $bindir_abs/smbdeleteshare
1315
1316         # fruit:copyfile is a global option
1317         fruit:copyfile = yes
1318
1319         # Begin extra options
1320         $extra_options
1321         # End extra options
1322
1323         #Include user defined custom parameters if set
1324 ";
1325
1326         if (defined($ENV{INCLUDE_CUSTOM_CONF})) {
1327                 print CONF "\t$ENV{INCLUDE_CUSTOM_CONF}\n";
1328         }
1329
1330         print CONF "
1331 [tmp]
1332         path = $shrdir
1333         comment = smb username is [%U]
1334 [tmpsort]
1335         path = $shrdir
1336         comment = Load dirsort module
1337         vfs objects = dirsort acl_xattr fake_acls xattr_tdb streams_depot
1338 [tmpenc]
1339         path = $shrdir
1340         comment = encrypt smb username is [%U]
1341         smb encrypt = required
1342         vfs objects = dirsort
1343 [tmpguest]
1344         path = $shrdir
1345         guest ok = yes
1346 [guestonly]
1347         path = $shrdir
1348         guest only = yes
1349         guest ok = yes
1350 [forceuser]
1351         path = $shrdir
1352         force user = $unix_name
1353         guest ok = yes
1354 [forceuser_unixonly]
1355         path = $shrdir
1356         force user = pdbtest
1357         guest ok = yes
1358 [forcegroup]
1359         path = $shrdir
1360         force group = nogroup
1361         guest ok = yes
1362 [ro-tmp]
1363         path = $ro_shrdir
1364         guest ok = yes
1365 [write-list-tmp]
1366         path = $shrdir
1367         read only = yes
1368         write list = $unix_name
1369 [valid-users-tmp]
1370         path = $shrdir
1371         valid users = $unix_name
1372 [msdfs-share]
1373         path = $msdfs_shrdir
1374         msdfs root = yes
1375         msdfs shuffle referrals = yes
1376         guest ok = yes
1377 [hideunread]
1378         copy = tmp
1379         hide unreadable = yes
1380 [tmpcase]
1381         copy = tmp
1382         case sensitive = yes
1383 [hideunwrite]
1384         copy = tmp
1385         hide unwriteable files = yes
1386 [durable]
1387         copy = tmp
1388         kernel share modes = no
1389         kernel oplocks = no
1390         posix locking = no
1391 [fs_specific]
1392         copy = tmp
1393         $fs_specific_conf
1394 [print1]
1395         copy = tmp
1396         printable = yes
1397
1398 [print2]
1399         copy = print1
1400 [print3]
1401         copy = print1
1402         default devmode = no
1403 [lp]
1404         copy = print1
1405
1406 [nfs4acl_simple]
1407         path = $shrdir
1408         comment = smb username is [%U]
1409         nfs4:mode = simple
1410         vfs objects = nfs4acl_xattr xattr_tdb
1411
1412 [nfs4acl_special]
1413         path = $shrdir
1414         comment = smb username is [%U]
1415         nfs4:mode = special
1416         vfs objects = nfs4acl_xattr xattr_tdb
1417
1418 [xcopy_share]
1419         path = $shrdir
1420         comment = smb username is [%U]
1421         create mask = 777
1422         force create mode = 777
1423 [posix_share]
1424         path = $shrdir
1425         comment = smb username is [%U]
1426         create mask = 0777
1427         force create mode = 0
1428         directory mask = 0777
1429         force directory mode = 0
1430         vfs objects = xattr_tdb
1431 [aio]
1432         copy = tmp
1433         aio read size = 1
1434         aio write size = 1
1435
1436 [print\$]
1437         copy = tmp
1438
1439 [vfs_fruit]
1440         path = $shrdir
1441         vfs objects = catia fruit streams_xattr
1442         fruit:ressource = file
1443         fruit:metadata = netatalk
1444         fruit:locking = netatalk
1445         fruit:encoding = native
1446
1447 [badname-tmp]
1448         path = $badnames_shrdir
1449         guest ok = yes
1450
1451 [manglenames_share]
1452         path = $manglenames_shrdir
1453         guest ok = yes
1454
1455 [dynamic_share]
1456         path = $shrdir/%R
1457         guest ok = yes
1458
1459 [fsrvp_share]
1460         path = $shrdir
1461         comment = fake shapshots using rsync
1462         vfs objects = shell_snap shadow_copy2
1463         shell_snap:check path command = $fake_snap_pl --check
1464         shell_snap:create command = $fake_snap_pl --create
1465         shell_snap:delete command = $fake_snap_pl --delete
1466         # a relative path here fails, the snapshot dir is no longer found
1467         shadow:snapdir = $shrdir/.snapshots
1468         ";
1469         close(CONF);
1470
1471         ##
1472         ## create a test account
1473         ##
1474
1475         unless (open(PASSWD, ">$nss_wrapper_passwd")) {
1476            warn("Unable to open $nss_wrapper_passwd");
1477            return undef;
1478         }
1479         print PASSWD "nobody:x:$uid_nobody:$gid_nobody:nobody gecos:$prefix_abs:/bin/false
1480 $unix_name:x:$unix_uid:$unix_gids[0]:$unix_name gecos:$prefix_abs:/bin/false
1481 pdbtest:x:$uid_pdbtest:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
1482 pdbtest2:x:$uid_pdbtest2:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
1483 ";
1484         if ($unix_uid != 0) {
1485                 print PASSWD "root:x:$uid_root:$gid_root:root gecos:$prefix_abs:/bin/false
1486 ";
1487         }
1488         close(PASSWD);
1489
1490         unless (open(GROUP, ">$nss_wrapper_group")) {
1491              warn("Unable to open $nss_wrapper_group");
1492              return undef;
1493         }
1494         print GROUP "nobody:x:$gid_nobody:
1495 nogroup:x:$gid_nogroup:nobody
1496 $unix_name-group:x:$unix_gids[0]:
1497 domusers:X:$gid_domusers:
1498 domadmins:X:$gid_domadmins:
1499 ";
1500         if ($unix_gids[0] != 0) {
1501                 print GROUP "root:x:$gid_root:
1502 ";
1503         }
1504
1505         close(GROUP);
1506
1507         ## hosts
1508         my $hostname = lc($server);
1509         unless (open(HOSTS, ">>$nss_wrapper_hosts")) {
1510                 warn("Unable to open $nss_wrapper_hosts");
1511                 return undef;
1512         }
1513         print HOSTS "${server_ip} ${hostname}.samba.example.com ${hostname}\n";
1514         print HOSTS "${server_ipv6} ${hostname}.samba.example.com ${hostname}\n";
1515         close(HOSTS);
1516
1517         ## hosts
1518         unless (open(RESOLV_CONF, ">$resolv_conf")) {
1519                 warn("Unable to open $resolv_conf");
1520                 return undef;
1521         }
1522         if (defined($dc_server_ip) or defined($dc_server_ipv6)) {
1523                 if (defined($dc_server_ip)) {
1524                         print RESOLV_CONF "nameserver $dc_server_ip\n";
1525                 }
1526                 if (defined($dc_server_ipv6)) {
1527                         print RESOLV_CONF "nameserver $dc_server_ipv6\n";
1528                 }
1529         } else {
1530                 print RESOLV_CONF "nameserver ${server_ip}\n";
1531                 print RESOLV_CONF "nameserver ${server_ipv6}\n";
1532         }
1533         close(RESOLV_CONF);
1534
1535         foreach my $evlog (@eventlog_list) {
1536                 my $evlogtdb = "$eventlogdir/$evlog.tdb";
1537                 open(EVENTLOG, ">$evlogtdb") or die("Unable to open $evlogtdb");
1538                 close(EVENTLOG);
1539         }
1540
1541         $ENV{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1542         $ENV{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1543         $ENV{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
1544         $ENV{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
1545         if ($ENV{SAMBA_DNS_FAKING}) {
1546                 $ENV{RESOLV_WRAPPER_CONF} = $resolv_conf;
1547         } else {
1548                 $ENV{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
1549         }
1550
1551         my $cmd = "UID_WRAPPER_ROOT=1 " . Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $unix_name > /dev/null";
1552         unless (open(PWD, "|$cmd")) {
1553              warn("Unable to set password for test account\n$cmd");
1554              return undef;
1555         }
1556         print PWD "$password\n$password\n";
1557         unless (close(PWD)) {
1558              warn("Unable to set password for test account\n$cmd");
1559              return undef;
1560         }
1561         print "DONE\n";
1562
1563         open(DNS_UPDATE_LIST, ">$prefix/dns_update_list") or die("Unable to open $$prefix/dns_update_list");
1564         print DNS_UPDATE_LIST "A $server. $server_ip\n";
1565         print DNS_UPDATE_LIST "AAAA $server. $server_ipv6\n";
1566         close(DNS_UPDATE_LIST);
1567
1568         $ret{SERVER_IP} = $server_ip;
1569         $ret{SERVER_IPV6} = $server_ipv6;
1570         $ret{NMBD_TEST_LOG} = "$prefix/nmbd_test.log";
1571         $ret{NMBD_TEST_LOG_POS} = 0;
1572         $ret{WINBINDD_TEST_LOG} = "$prefix/winbindd_test.log";
1573         $ret{WINBINDD_TEST_LOG_POS} = 0;
1574         $ret{SMBD_TEST_LOG} = "$prefix/smbd_test.log";
1575         $ret{SMBD_TEST_LOG_POS} = 0;
1576         $ret{SERVERCONFFILE} = $conffile;
1577         $ret{CONFIGURATION} ="-s $conffile";
1578         $ret{SERVER} = $server;
1579         $ret{USERNAME} = $unix_name;
1580         $ret{USERID} = $unix_uid;
1581         $ret{DOMAIN} = $domain;
1582         $ret{NETBIOSNAME} = $server;
1583         $ret{PASSWORD} = $password;
1584         $ret{PIDDIR} = $piddir;
1585         $ret{SELFTEST_WINBINDD_SOCKET_DIR} = $wbsockdir;
1586         $ret{WINBINDD_PRIV_PIPE_DIR} = $wbsockprivdir;
1587         $ret{NMBD_SOCKET_DIR} = $nmbdsockdir;
1588         $ret{SOCKET_WRAPPER_DEFAULT_IFACE} = $swiface;
1589         $ret{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1590         $ret{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1591         $ret{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
1592         $ret{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
1593         $ret{NSS_WRAPPER_MODULE_SO_PATH} = Samba::nss_wrapper_winbind_so_path($self);
1594         $ret{NSS_WRAPPER_MODULE_FN_PREFIX} = "winbind";
1595         if ($ENV{SAMBA_DNS_FAKING}) {
1596                 $ret{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
1597         } else {
1598                 $ret{RESOLV_WRAPPER_CONF} = $resolv_conf;
1599         }
1600         $ret{LOCAL_PATH} = "$shrdir";
1601         $ret{LOGDIR} = $logdir;
1602
1603         return \%ret;
1604 }
1605
1606 sub wait_for_start($$$$$)
1607 {
1608         my ($self, $envvars, $nmbd, $winbindd, $smbd) = @_;
1609         my $ret;
1610
1611         if ($nmbd eq "yes") {
1612                 my $count = 0;
1613
1614                 # give time for nbt server to register its names
1615                 print "checking for nmbd\n";
1616
1617                 # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
1618                 my $nmblookup = Samba::bindir_path($self, "nmblookup");
1619
1620                 do {
1621                         $ret = system("$nmblookup $envvars->{CONFIGURATION} $envvars->{SERVER}");
1622                         if ($ret != 0) {
1623                                 sleep(1);
1624                         } else {
1625                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
1626                                 system("$nmblookup $envvars->{CONFIGURATION} __SAMBA__");
1627                                 system("$nmblookup $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
1628                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
1629                         }
1630                         $count++;
1631                 } while ($ret != 0 && $count < 10);
1632                 if ($count == 10) {
1633                         print "NMBD not reachable after 10 retries\n";
1634                         teardown_env($self, $envvars);
1635                         return 0;
1636                 }
1637         }
1638
1639         if ($winbindd eq "yes") {
1640             print "checking for winbindd\n";
1641             my $count = 0;
1642             do {
1643                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --ping-dc");
1644                 if ($ret != 0) {
1645                     sleep(2);
1646                 }
1647                 $count++;
1648             } while ($ret != 0 && $count < 10);
1649             if ($count == 10) {
1650                 print "WINBINDD not reachable after 20 seconds\n";
1651                 teardown_env($self, $envvars);
1652                 return 0;
1653             }
1654         }
1655
1656         if ($smbd eq "yes") {
1657             # make sure smbd is also up set
1658             print "wait for smbd\n";
1659
1660             my $count = 0;
1661             do {
1662                 $ret = system(Samba::bindir_path($self, "smbclient") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
1663                 if ($ret != 0) {
1664                     sleep(2);
1665                 }
1666                 $count++
1667             } while ($ret != 0 && $count < 10);
1668             if ($count == 10) {
1669                 print "SMBD failed to start up in a reasonable time (20sec)\n";
1670                 teardown_env($self, $envvars);
1671                 return 0;
1672             }
1673         }
1674
1675         # Ensure we have domain users mapped.
1676         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=513 unixgroup=domusers type=domain");
1677         if ($ret != 0) {
1678             return 1;
1679         }
1680         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=512 unixgroup=domadmins type=domain");
1681         if ($ret != 0) {
1682             return 1;
1683         }
1684
1685         if ($winbindd eq "yes") {
1686             # note: creating builtin groups requires winbindd for the
1687             # unix id allocator
1688             $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} sam createbuiltingroup Users");
1689             if ($ret != 0) {
1690                 print "Failed to create BUILTIN\\Users group\n";
1691                 return 0;
1692             }
1693             my $count = 0;
1694             do {
1695                 system(Samba::bindir_path($self, "net") . " $envvars->{CONFIGURATION} cache flush");
1696                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --sid-to-gid=S-1-5-32-545");
1697                 if ($ret != 0) {
1698                     sleep(2);
1699                 }
1700                 $count++;
1701             } while ($ret != 0 && $count < 10);
1702             if ($count == 10) {
1703                 print "WINBINDD not reachable after 20 seconds\n";
1704                 teardown_env($self, $envvars);
1705                 return 0;
1706             }
1707         }
1708
1709         print $self->getlog_env($envvars);
1710
1711         return 1;
1712 }
1713
1714 1;