source3/modules/vfs_smb_traffic_analyzer.h

   1 /*
   2  * traffic-analyzer VFS module. Measure the smb traffic users create
   3  * on the net.
   4  *
   5  * Copyright (C) Holger Hetterich, 2008
   6  * Copyright (C) Jeremy Allison, 2008
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License as published by
  10  * the Free Software Foundation; either version 3 of the License, or
  11  * (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, see <http://www.gnu.org/licenses/>.
  20  */
  21
  22 /**
  23  * Protocol version 2.0 description
  24  *
  25  * The following table shows the exact assembly of the 2.0 protocol.
  26  *
  27  * -->Header<--
  28  * The protocol header is always send first, and contains various
  29  * information about the data block to come.
  30  * The header is always of fixed length, and will be send unencrypted.
  31  *
  32  * Byte Number/Bytes    Description
  33  * 00-02                Contains always the string "V2."
  34  * 03                   This byte contains a possible subrelease number of the
  35  *                      protocol. This enables the receiver to make a version
  36  *                      check to ensure the compatibility and allows us to
  37  *                      release 2.x versions of the protocol with bugfixes or
  38  *                      enhancements.
  39  * 04                   This byte is reserved for possible future extensions.
  40  * 05                   Usually, this byte contains the character '0'. If the
  41  *                      VFS module is configured for encryption of the data,
  42  *                      this byte is set to 'E'.
  43  * 06-09                These bytes contain the character '0' by default, and
  44  *                      are reserved for possible future extensions. They have
  45  *                      no function in 2.0.
  46  * 10-27                17 bytes containing a string representation of the
  47  *                      number of bytes to come in the following data block.
  48  *                      It is right aligned and filled from the left with '0'.
  49  *
  50  * -->Data Block<--
  51  * The data block is send immediately after the header was send. It's length
  52  * is exactly what was given in bytes 11-28 from in the header.
  53  *
  54  * The data block may be send encrypted.
  55  *
  56  * To make the data block easy for the receiver to read, it is divided into
  57  * several sub-blocks, each with it's own header of four byte length. In each
  58  * of the sub-headers, a string representation of the length of this block is
  59  * to be found.
  60  *
  61  * Thus the formal structure is very simple:
  62  *
  63  * [HEADER]data[HEADER]data[HEADER]data[END]
  64  *
  65  * whereas [END] is exactly at the position given in bytes 11-28 of the
  66  * header.
  67  *
  68  * Some data the VFS module is capturing is of use for any VFS operation.
  69  * Therefore, there is a "common set" of data, that will be send with any
  70  * data block. The following provides a list of this data.
  71  * - the VFS function identifier (see VFS function ifentifier table below).
  72  * - a timestamp to the millisecond.
  73  * - the username (as text) who runs the VFS operation.
  74  * - the SID of the user who run the VFS operation.
  75  * - the domain under which the VFS operation has happened.
  76  *
  77  */
  78
  79 /* Protocol subrelease number */
  80 #define SMBTA_SUBRELEASE '0'
  81
  82 /*
  83  * Every data block sends a number of blocks sending common data
  84  * we send the number of "common data blocks" to come very first
  85  * so that if the receiver is using an older version of the protocol
  86  * it knows which blocks it can ignore.
  87  */
  88 #define SMBTA_COMMON_DATA_COUNT "00017"
  89
  90 /*
  91  * VFS Functions identifier table. In protocol version 2, every vfs
  92  * function is given a unique id.
  93  */
  94 enum vfs_id {
  95         /*
  96          * care for the order here, required for compatibility
  97          * with protocol version 1.
  98          */
  99         vfs_id_read,
 100         vfs_id_pread,
 101         vfs_id_write,
 102         vfs_id_pwrite,
 103         /* end of protocol version 1 identifiers. */
 104         vfs_id_mkdir,
 105         vfs_id_rmdir,
 106         vfs_id_rename,
 107         vfs_id_chdir,
 108         vfs_id_open,
 109         vfs_id_close
 110 };
 111
 112
 113
 114 /*
 115  * Specific data sets for the VFS functions.
 116  * A compatible receiver has to have the exact same dataset.
 117  */
 118 struct open_data {
 119         const char *filename;
 120         mode_t mode;
 121         int result;
 122 };
 123
 124 struct close_data {
 125         const char *filename;
 126         int result;
 127 };
 128
 129 struct mkdir_data {
 130         const char *path;
 131         mode_t mode;
 132         int result;
 133 };
 134
 135 struct rmdir_data {
 136         const char *path;
 137         int result;
 138 };
 139
 140 struct rename_data {
 141         const char *src;
 142         const char *dst;
 143         int result;
 144 };
 145
 146 struct chdir_data {
 147         const char *path;
 148         int result;
 149 };
 150
 151 /* rw_data used for read/write/pread/pwrite */
 152 struct rw_data {
 153         char *filename;
 154         size_t len;
 155 };
 156
 157