selftest/target/Samba3.pm

   1 #!/usr/bin/perl
   2 # Bootstrap Samba and run a number of tests against it.
   3 # Copyright (C) 2005-2007 Jelmer Vernooij <jelmer@samba.org>
   4 # Published under the GNU GPL, v3 or later.
   5
   6 package Samba3;
   7
   8 use strict;
   9 use Cwd qw(abs_path);
  10 use FindBin qw($RealBin);
  11 use POSIX;
  12 use target::Samba;
  13
  14 sub have_ads($) {
  15         my ($self) = @_;
  16         my $found_ads = 0;
  17         my $smbd_build_options = Samba::bindir_path($self, "smbd") . " -b|";
  18         open(IN, $smbd_build_options) or die("Unable to run $smbd_build_options: $!");
  19
  20         while (<IN>) {
  21                 if (/WITH_ADS/) {
  22                        $found_ads = 1;
  23                 }
  24         }
  25         close IN;
  26
  27         # If we were not built with ADS support, pretend we were never even available
  28         print "smbd does not have ADS support\n" unless $found_ads;
  29         return $found_ads;
  30 }
  31
  32 # return smb.conf parameters applicable to @path, based on the underlying
  33 # filesystem type
  34 sub get_fs_specific_conf($$)
  35 {
  36         my ($self, $path) = @_;
  37         my $mods = "";
  38         my $stat_out = `stat --file-system $path` or return "";
  39
  40         if ($stat_out =~ m/Type:\s+btrfs/) {
  41                 $mods .= "btrfs ";
  42         }
  43
  44         if ($mods) {
  45                 return "vfs objects = $mods";
  46         }
  47
  48         return undef;
  49 }
  50
  51 sub new($$) {
  52         my ($classname, $bindir, $srcdir, $server_maxtime) = @_;
  53         my $self = { vars => {},
  54                      bindir => $bindir,
  55                      srcdir => $srcdir,
  56                      server_maxtime => $server_maxtime
  57         };
  58         bless $self;
  59         return $self;
  60 }
  61
  62 sub teardown_env($$)
  63 {
  64         my ($self, $envvars) = @_;
  65         my $count = 0;
  66
  67         # This should cause smbd to terminate gracefully
  68         close($envvars->{STDIN_PIPE});
  69
  70         my $smbdpid = $envvars->{SMBD_TL_PID};
  71         my $nmbdpid = $envvars->{NMBD_TL_PID};
  72         my $winbinddpid = $envvars->{WINBINDD_TL_PID};
  73
  74         # This should give it time to write out the gcov data
  75         until ($count > 20) {
  76             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  77             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
  78             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
  79             if ($smbdchild == -1
  80                 && $nmbdchild == -1
  81                 && $winbinddchild == -1) {
  82                 last;
  83             }
  84             sleep(1);
  85             $count++;
  86         }
  87
  88         if ($count <= 20 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
  89             return;
  90         }
  91
  92         $self->stop_sig_term($smbdpid);
  93         $self->stop_sig_term($nmbdpid);
  94         $self->stop_sig_term($winbinddpid);
  95
  96         $count = 0;
  97         until ($count > 10) {
  98             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  99             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
 100             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
 101             if ($smbdchild == -1
 102                 && $nmbdchild == -1
 103                 && $winbinddchild == -1) {
 104                 last;
 105             }
 106             sleep(1);
 107             $count++;
 108         }
 109
 110         if ($count <= 10 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
 111             return;
 112         }
 113
 114         warn("timelimit process did not quit on SIGTERM, sending SIGKILL");
 115         $self->stop_sig_kill($smbdpid);
 116         $self->stop_sig_kill($nmbdpid);
 117         $self->stop_sig_kill($winbinddpid);
 118
 119         return 0;
 120 }
 121
 122 sub getlog_env_app($$$)
 123 {
 124         my ($self, $envvars, $name) = @_;
 125
 126         my $title = "$name LOG of: $envvars->{NETBIOSNAME}\n";
 127         my $out = $title;
 128
 129         open(LOG, "<".$envvars->{$name."_TEST_LOG"});
 130
 131         seek(LOG, $envvars->{$name."_TEST_LOG_POS"}, SEEK_SET);
 132         while (<LOG>) {
 133                 $out .= $_;
 134         }
 135         $envvars->{$name."_TEST_LOG_POS"} = tell(LOG);
 136         close(LOG);
 137
 138         return "" if $out eq $title;
 139
 140         return $out;
 141 }
 142
 143 sub getlog_env($$)
 144 {
 145         my ($self, $envvars) = @_;
 146         my $ret = "";
 147
 148         $ret .= $self->getlog_env_app($envvars, "SMBD");
 149         $ret .= $self->getlog_env_app($envvars, "NMBD");
 150         $ret .= $self->getlog_env_app($envvars, "WINBINDD");
 151
 152         return $ret;
 153 }
 154
 155 sub check_env($$)
 156 {
 157         my ($self, $envvars) = @_;
 158
 159         my $childpid = waitpid(-1, WNOHANG);
 160
 161         # TODO ...
 162         return 1;
 163 }
 164
 165 sub setup_env($$$)
 166 {
 167         my ($self, $envname, $path) = @_;
 168
 169         $ENV{ENVNAME} = $envname;
 170
 171         if (defined($self->{vars}->{$envname})) {
 172                 return $self->{vars}->{$envname};
 173         }
 174
 175         #
 176         # Avoid hitting system krb5.conf -
 177         # An env that needs Kerberos will reset this to the real
 178         # value.
 179         #
 180         $ENV{KRB5_CONFIG} = "$path/no_krb5.conf";
 181
 182         if ($envname eq "nt4_dc") {
 183                 return $self->setup_nt4_dc("$path/nt4_dc");
 184         } elsif ($envname eq "nt4_dc_schannel") {
 185                 return $self->setup_nt4_dc_schannel("$path/nt4_dc_schannel");
 186         } elsif ($envname eq "simpleserver") {
 187                 return $self->setup_simpleserver("$path/simpleserver");
 188         } elsif ($envname eq "fileserver") {
 189                 return $self->setup_fileserver("$path/fileserver");
 190         } elsif ($envname eq "maptoguest") {
 191                 return $self->setup_maptoguest("$path/maptoguest");
 192         } elsif ($envname eq "ktest") {
 193                 return $self->setup_ktest("$path/ktest");
 194         } elsif ($envname eq "nt4_member") {
 195                 if (not defined($self->{vars}->{nt4_dc})) {
 196                         if (not defined($self->setup_nt4_dc("$path/nt4_dc"))) {
 197                                 return undef;
 198                         }
 199                 }
 200                 return $self->setup_nt4_member("$path/nt4_member", $self->{vars}->{nt4_dc});
 201         } else {
 202                 return "UNKNOWN";
 203         }
 204 }
 205
 206 sub setup_nt4_dc($$)
 207 {
 208         my ($self, $path) = @_;
 209
 210         print "PROVISIONING NT4 DC...";
 211
 212         my $nt4_dc_options = "
 213         domain master = yes
 214         domain logons = yes
 215         lanman auth = yes
 216
 217         rpc_server:epmapper = external
 218         rpc_server:spoolss = external
 219         rpc_server:lsarpc = external
 220         rpc_server:samr = external
 221         rpc_server:netlogon = external
 222         rpc_server:register_embedded_np = yes
 223         rpc_server:FssagentRpc = external
 224
 225         rpc_daemon:epmd = fork
 226         rpc_daemon:spoolssd = fork
 227         rpc_daemon:lsasd = fork
 228         rpc_daemon:fssd = fork
 229         fss: sequence timeout = 1
 230 ";
 231
 232         my $vars = $self->provision($path,
 233                                     "LOCALNT4DC2",
 234                                     "localntdc2pass",
 235                                     $nt4_dc_options);
 236
 237         $vars or return undef;
 238
 239         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 240                return undef;
 241         }
 242
 243         $vars->{DC_SERVER} = $vars->{SERVER};
 244         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 245         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 246         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 247         $vars->{DC_USERNAME} = $vars->{USERNAME};
 248         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 249
 250         $self->{vars}->{nt4_dc} = $vars;
 251
 252         return $vars;
 253 }
 254
 255 sub setup_nt4_dc_schannel($$)
 256 {
 257         my ($self, $path) = @_;
 258
 259         print "PROVISIONING NT4 DC WITH SERVER SCHANNEL ...";
 260
 261         my $pdc_options = "
 262         domain master = yes
 263         domain logons = yes
 264         lanman auth = yes
 265
 266         rpc_server:epmapper = external
 267         rpc_server:spoolss = external
 268         rpc_server:lsarpc = external
 269         rpc_server:samr = external
 270         rpc_server:netlogon = external
 271         rpc_server:register_embedded_np = yes
 272
 273         rpc_daemon:epmd = fork
 274         rpc_daemon:spoolssd = fork
 275         rpc_daemon:lsasd = fork
 276
 277         server schannel = yes
 278 ";
 279
 280         my $vars = $self->provision($path,
 281                                     "LOCALNT4DC9",
 282                                     "localntdc9pass",
 283                                     $pdc_options);
 284
 285         $vars or return undef;
 286
 287         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 288                return undef;
 289         }
 290
 291         $vars->{DC_SERVER} = $vars->{SERVER};
 292         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 293         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 294         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 295         $vars->{DC_USERNAME} = $vars->{USERNAME};
 296         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 297
 298         $self->{vars}->{nt4_dc_schannel} = $vars;
 299
 300         return $vars;
 301 }
 302
 303 sub setup_nt4_member($$$)
 304 {
 305         my ($self, $prefix, $nt4_dc_vars) = @_;
 306         my $count = 0;
 307         my $rc;
 308
 309         print "PROVISIONING MEMBER...";
 310
 311         my $member_options = "
 312         security = domain
 313         server signing = on
 314         dbwrap_tdb_mutexes:* = yes
 315 ";
 316         my $ret = $self->provision($prefix,
 317                                    "LOCALNT4MEMBER3",
 318                                    "localnt4member3pass",
 319                                    $member_options);
 320
 321         $ret or return undef;
 322
 323         my $nmblookup = Samba::bindir_path($self, "nmblookup");
 324         do {
 325                 print "Waiting for the LOGON SERVER registration ...\n";
 326                 $rc = system("$nmblookup $ret->{CONFIGURATION} $ret->{DOMAIN}\#1c");
 327                 if ($rc != 0) {
 328                         sleep(1);
 329                 }
 330                 $count++;
 331         } while ($rc != 0 && $count < 10);
 332         if ($count == 10) {
 333                 print "NMBD not reachable after 10 retries\n";
 334                 teardown_env($self, $ret);
 335                 return 0;
 336         }
 337
 338         my $net = Samba::bindir_path($self, "net");
 339         my $cmd = "";
 340         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 341         $cmd .= "$net join $ret->{CONFIGURATION} $nt4_dc_vars->{DOMAIN} member";
 342         $cmd .= " -U$nt4_dc_vars->{USERNAME}\%$nt4_dc_vars->{PASSWORD}";
 343
 344         if (system($cmd) != 0) {
 345             warn("Join failed\n$cmd");
 346             return undef;
 347         }
 348
 349         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 350                return undef;
 351         }
 352
 353         $ret->{DC_SERVER} = $nt4_dc_vars->{SERVER};
 354         $ret->{DC_SERVER_IP} = $nt4_dc_vars->{SERVER_IP};
 355         $ret->{DC_SERVER_IPV6} = $nt4_dc_vars->{SERVER_IPV6};
 356         $ret->{DC_NETBIOSNAME} = $nt4_dc_vars->{NETBIOSNAME};
 357         $ret->{DC_USERNAME} = $nt4_dc_vars->{USERNAME};
 358         $ret->{DC_PASSWORD} = $nt4_dc_vars->{PASSWORD};
 359
 360         return $ret;
 361 }
 362
 363 sub setup_admember($$$$)
 364 {
 365         my ($self, $prefix, $dcvars) = @_;
 366
 367         # If we didn't build with ADS, pretend this env was never available
 368         if (not $self->have_ads()) {
 369                 return "UNKNOWN";
 370         }
 371
 372         print "PROVISIONING S3 AD MEMBER...";
 373
 374         my $member_options = "
 375         security = ads
 376         server signing = on
 377         workgroup = $dcvars->{DOMAIN}
 378         realm = $dcvars->{REALM}
 379 ";
 380
 381         my $ret = $self->provision($prefix,
 382                                    "LOCALADMEMBER",
 383                                    "loCalMemberPass",
 384                                    $member_options,
 385                                    $dcvars->{SERVER_IP},
 386                                    $dcvars->{SERVER_IPV6});
 387
 388         $ret or return undef;
 389
 390         close(USERMAP);
 391         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 392         $ret->{REALM} = $dcvars->{REALM};
 393
 394         my $ctx;
 395         my $prefix_abs = abs_path($prefix);
 396         $ctx = {};
 397         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 398         $ctx->{domain} = $dcvars->{DOMAIN};
 399         $ctx->{realm} = $dcvars->{REALM};
 400         $ctx->{dnsname} = lc($dcvars->{REALM});
 401         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 402         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 403         Samba::mk_krb5_conf($ctx, "");
 404
 405         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 406
 407         my $net = Samba::bindir_path($self, "net");
 408         my $cmd = "";
 409         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 410         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 411                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 412         } else {
 413                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 414         }
 415         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 416         $cmd .= "$net join $ret->{CONFIGURATION}";
 417         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 418
 419         if (system($cmd) != 0) {
 420             warn("Join failed\n$cmd");
 421             return undef;
 422         }
 423
 424         # We need world access to this share, as otherwise the domain
 425         # administrator from the AD domain provided by Samba4 can't
 426         # access the share for tests.
 427         chmod 0777, "$prefix/share";
 428
 429         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 430                 return undef;
 431         }
 432
 433         $ret->{DC_SERVER} = $dcvars->{SERVER};
 434         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 435         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 436         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 437         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 438         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 439
 440         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 441         $ret->{target} = $self;
 442
 443         return $ret;
 444 }
 445
 446 sub setup_admember_rfc2307($$$$)
 447 {
 448         my ($self, $prefix, $dcvars) = @_;
 449
 450         # If we didn't build with ADS, pretend this env was never available
 451         if (not $self->have_ads()) {
 452                 return "UNKNOWN";
 453         }
 454
 455         print "PROVISIONING S3 AD MEMBER WITH idmap_rfc2307 config...";
 456
 457         my $member_options = "
 458         security = ads
 459         server signing = on
 460         workgroup = $dcvars->{DOMAIN}
 461         realm = $dcvars->{REALM}
 462         idmap config $dcvars->{DOMAIN} : backend = rfc2307
 463         idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
 464         idmap config $dcvars->{DOMAIN} : ldap_server = ad
 465         idmap config $dcvars->{DOMAIN} : bind_path_user = ou=idmap,dc=samba,dc=example,dc=com
 466         idmap config $dcvars->{DOMAIN} : bind_path_group = ou=idmap,dc=samba,dc=example,dc=com
 467 ";
 468
 469         my $ret = $self->provision($prefix,
 470                                    "RFC2307MEMBER",
 471                                    "loCalMemberPass",
 472                                    $member_options,
 473                                    $dcvars->{SERVER_IP},
 474                                    $dcvars->{SERVER_IPV6});
 475
 476         $ret or return undef;
 477
 478         close(USERMAP);
 479         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 480         $ret->{REALM} = $dcvars->{REALM};
 481
 482         my $ctx;
 483         my $prefix_abs = abs_path($prefix);
 484         $ctx = {};
 485         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 486         $ctx->{domain} = $dcvars->{DOMAIN};
 487         $ctx->{realm} = $dcvars->{REALM};
 488         $ctx->{dnsname} = lc($dcvars->{REALM});
 489         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 490         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 491         Samba::mk_krb5_conf($ctx, "");
 492
 493         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 494
 495         my $net = Samba::bindir_path($self, "net");
 496         my $cmd = "";
 497         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 498         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 499                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 500         } else {
 501                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 502         }
 503         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 504         $cmd .= "$net join $ret->{CONFIGURATION}";
 505         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 506
 507         if (system($cmd) != 0) {
 508             warn("Join failed\n$cmd");
 509             return undef;
 510         }
 511
 512         # We need world access to this share, as otherwise the domain
 513         # administrator from the AD domain provided by Samba4 can't
 514         # access the share for tests.
 515         chmod 0777, "$prefix/share";
 516
 517         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 518                 return undef;
 519         }
 520
 521         $ret->{DC_SERVER} = $dcvars->{SERVER};
 522         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 523         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 524         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 525         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 526         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 527
 528         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 529         $ret->{target} = $self;
 530
 531         return $ret;
 532 }
 533
 534 sub setup_simpleserver($$)
 535 {
 536         my ($self, $path) = @_;
 537
 538         print "PROVISIONING simple server...";
 539
 540         my $prefix_abs = abs_path($path);
 541
 542         my $simpleserver_options = "
 543         lanman auth = yes
 544         vfs objects = xattr_tdb streams_depot
 545         change notify = no
 546
 547 [vfs_aio_fork]
 548         path = $prefix_abs/share
 549         vfs objects = aio_fork
 550         read only = no
 551         vfs_aio_fork:erratic_testing_mode=yes
 552 ";
 553
 554         my $vars = $self->provision($path,
 555                                     "LOCALSHARE4",
 556                                     "local4pass",
 557                                     $simpleserver_options);
 558
 559         $vars or return undef;
 560
 561         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 562                return undef;
 563         }
 564
 565         $self->{vars}->{simpleserver} = $vars;
 566
 567         return $vars;
 568 }
 569
 570 sub setup_fileserver($$)
 571 {
 572         my ($self, $path) = @_;
 573         my $prefix_abs = abs_path($path);
 574         my $srcdir_abs = abs_path($self->{srcdir});
 575
 576         print "PROVISIONING file server ...\n";
 577
 578         my @dirs = ();
 579
 580         mkdir($prefix_abs, 0777);
 581
 582         my $share_dir="$prefix_abs/share";
 583
 584         # Create share directory structure
 585         my $lower_case_share_dir="$share_dir/lower-case";
 586         push(@dirs, $lower_case_share_dir);
 587
 588         my $lower_case_share_dir_30000="$share_dir/lower-case-30000";
 589         push(@dirs, $lower_case_share_dir_30000);
 590
 591         my $dfree_share_dir="$share_dir/dfree";
 592         push(@dirs, $dfree_share_dir);
 593         push(@dirs, "$dfree_share_dir/subdir1");
 594         push(@dirs, "$dfree_share_dir/subdir2");
 595
 596         my $valid_users_sharedir="$share_dir/valid_users";
 597         push(@dirs,$valid_users_sharedir);
 598
 599         my $offline_sharedir="$share_dir/offline";
 600         push(@dirs,$offline_sharedir);
 601
 602         my $force_user_valid_users_dir = "$share_dir/force_user_valid_users";
 603         push(@dirs, $force_user_valid_users_dir);
 604
 605         my $fileserver_options = "
 606 [lowercase]
 607         path = $lower_case_share_dir
 608         comment = smb username is [%U]
 609         case sensitive = True
 610         default case = lower
 611         preserve case = no
 612         short preserve case = no
 613 [lowercase-30000]
 614         path = $lower_case_share_dir_30000
 615         comment = smb username is [%U]
 616         case sensitive = True
 617         default case = lower
 618         preserve case = no
 619         short preserve case = no
 620 [dfree]
 621         path = $dfree_share_dir
 622         comment = smb username is [%U]
 623         dfree command = $srcdir_abs/testprogs/blackbox/dfree.sh
 624 [valid-users-access]
 625         path = $valid_users_sharedir
 626         valid users = +userdup
 627 [offline]
 628         path = $offline_sharedir
 629         vfs objects = offline
 630
 631 # BUG: https://bugzilla.samba.org/show_bug.cgi?id=9878
 632 # RH BUG: https://bugzilla.redhat.com/show_bug.cgi?id=1077651
 633 [force_user_valid_users]
 634         path = $force_user_valid_users_dir
 635         comment = force user with valid users combination test share
 636         valid users = +force_user
 637         force user = force_user
 638         force group = everyone
 639         write list = force_user
 640         ";
 641
 642         my $vars = $self->provision($path,
 643                                     "FILESERVER",
 644                                     "fileserver",
 645                                     $fileserver_options,
 646                                     undef,
 647                                     undef,
 648                                     1);
 649
 650         $vars or return undef;
 651
 652         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 653                return undef;
 654         }
 655
 656         $self->{vars}->{fileserver} = $vars;
 657
 658         mkdir($_, 0777) foreach(@dirs);
 659
 660         ## Create case sensitive lower case share dir
 661         foreach my $file ('a'..'z') {
 662                 my $full_path = $lower_case_share_dir . '/' . $file;
 663                 open my $fh, '>', $full_path;
 664                 # Add some content to file
 665                 print $fh $full_path;
 666                 close $fh;
 667         }
 668
 669         for (my $file = 1; $file < 51; ++$file) {
 670                 my $full_path = $lower_case_share_dir . '/' . $file;
 671                 open my $fh, '>', $full_path;
 672                 # Add some content to file
 673                 print $fh $full_path;
 674                 close $fh;
 675         }
 676
 677         # Create content for 30000 share
 678         foreach my $file ('a'..'z') {
 679                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
 680                 open my $fh, '>', $full_path;
 681                 # Add some content to file
 682                 print $fh $full_path;
 683                 close $fh;
 684         }
 685
 686         for (my $file = 1; $file < 30001; ++$file) {
 687                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
 688                 open my $fh, '>', $full_path;
 689                 # Add some content to file
 690                 print $fh $full_path;
 691                 close $fh;
 692         }
 693
 694         ##
 695         ## create a listable file in valid_users_share
 696         ##
 697         my $valid_users_target = "$valid_users_sharedir/foo";
 698         unless (open(VALID_USERS_TARGET, ">$valid_users_target")) {
 699                 warn("Unable to open $valid_users_target");
 700                 return undef;
 701         }
 702         close(VALID_USERS_TARGET);
 703         chmod 0644, $valid_users_target;
 704
 705         return $vars;
 706 }
 707
 708 sub setup_ktest($$$)
 709 {
 710         my ($self, $prefix) = @_;
 711
 712         # If we didn't build with ADS, pretend this env was never available
 713         if (not $self->have_ads()) {
 714                 return "UNKNOWN";
 715         }
 716
 717         print "PROVISIONING server with security=ads...";
 718
 719         my $ktest_options = "
 720         workgroup = KTEST
 721         realm = ktest.samba.example.com
 722         security = ads
 723         username map = $prefix/lib/username.map
 724         server signing = required
 725 ";
 726
 727         my $ret = $self->provision($prefix,
 728                                    "LOCALKTEST6",
 729                                    "localktest6pass",
 730                                    $ktest_options);
 731
 732         $ret or return undef;
 733
 734         my $ctx;
 735         my $prefix_abs = abs_path($prefix);
 736         $ctx = {};
 737         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 738         $ctx->{domain} = "KTEST";
 739         $ctx->{realm} = "KTEST.SAMBA.EXAMPLE.COM";
 740         $ctx->{dnsname} = lc($ctx->{realm});
 741         $ctx->{kdc_ipv4} = "0.0.0.0";
 742         $ctx->{kdc_ipv6} = "::";
 743         Samba::mk_krb5_conf($ctx, "");
 744
 745         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 746
 747         open(USERMAP, ">$prefix/lib/username.map") or die("Unable to open $prefix/lib/username.map");
 748         print USERMAP "
 749 $ret->{USERNAME} = KTEST\\Administrator
 750 ";
 751         close(USERMAP);
 752
 753 #This is the secrets.tdb created by 'net ads join' from Samba3 to a
 754 #Samba4 DC with the same parameters as are being used here.  The
 755 #domain SID is S-1-5-21-1071277805-689288055-3486227160
 756
 757         system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb $prefix/private/secrets.tdb");
 758         chmod 0600, "$prefix/private/secrets.tdb";
 759
 760 #Make sure there's no old ntdb file.
 761         system("rm -f $prefix/private/secrets.ntdb");
 762
 763 #This uses a pre-calculated krb5 credentials cache, obtained by running Samba4 with:
 764 # "--option=kdc:service ticket lifetime=239232" "--option=kdc:user ticket lifetime=239232" "--option=kdc:renewal lifetime=239232"
 765 #
 766 #and having in krb5.conf:
 767 # ticket_lifetime = 799718400
 768 # renew_lifetime = 799718400
 769 #
 770 # The commands for the -2 keytab where were:
 771 # kinit administrator@KTEST.SAMBA.EXAMPLE.COM
 772 # kvno host/localktest6@KTEST.SAMBA.EXAMPLE.COM
 773 # kvno cifs/localktest6@KTEST.SAMBA.EXAMPLE.COM
 774 # kvno host/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 775 # kvno cifs/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 776 #
 777 # and then for the -3 keytab, I did
 778 #
 779 # net changetrustpw; kdestroy and the same again.
 780 #
 781 # This creates a credential cache with a very long lifetime (2036 at
 782 # at 2011-04), and shows that running 'net changetrustpw' does not
 783 # break existing logins (for the secrets.tdb method at least).
 784 #
 785
 786         $ret->{KRB5_CCACHE}="FILE:$prefix/krb5_ccache";
 787
 788         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-2 $prefix/krb5_ccache-2");
 789         chmod 0600, "$prefix/krb5_ccache-2";
 790
 791         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-3 $prefix/krb5_ccache-3");
 792         chmod 0600, "$prefix/krb5_ccache-3";
 793
 794         # We need world access to this share, as otherwise the domain
 795         # administrator from the AD domain provided by ktest can't
 796         # access the share for tests.
 797         chmod 0777, "$prefix/share";
 798
 799         if (not $self->check_or_start($ret, "yes", "no", "yes")) {
 800                return undef;
 801         }
 802         return $ret;
 803 }
 804
 805 sub setup_maptoguest($$)
 806 {
 807         my ($self, $path) = @_;
 808
 809         print "PROVISIONING maptoguest...";
 810
 811         my $options = "
 812 map to guest = bad user
 813 ";
 814
 815         my $vars = $self->provision($path,
 816                                     "maptoguest",
 817                                     "maptoguestpass",
 818                                     $options);
 819
 820         $vars or return undef;
 821
 822         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 823                return undef;
 824         }
 825
 826         $self->{vars}->{s3maptoguest} = $vars;
 827
 828         return $vars;
 829 }
 830
 831 sub stop_sig_term($$) {
 832         my ($self, $pid) = @_;
 833         kill("USR1", $pid) or kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 834 }
 835
 836 sub stop_sig_kill($$) {
 837         my ($self, $pid) = @_;
 838         kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 839 }
 840
 841 sub write_pid($$$)
 842 {
 843         my ($env_vars, $app, $pid) = @_;
 844
 845         open(PID, ">$env_vars->{PIDDIR}/timelimit.$app.pid");
 846         print PID $pid;
 847         close(PID);
 848 }
 849
 850 sub read_pid($$)
 851 {
 852         my ($env_vars, $app) = @_;
 853
 854         open(PID, "<$env_vars->{PIDDIR}/timelimit.$app.pid");
 855         my $pid = <PID>;
 856         close(PID);
 857         return $pid;
 858 }
 859
 860 sub check_or_start($$$$$) {
 861         my ($self, $env_vars, $nmbd, $winbindd, $smbd) = @_;
 862
 863         # use a pipe for stdin in the child processes. This allows
 864         # those processes to monitor the pipe for EOF to ensure they
 865         # exit when the test script exits
 866         pipe(STDIN_READER, $env_vars->{STDIN_PIPE});
 867
 868         unlink($env_vars->{NMBD_TEST_LOG});
 869         print "STARTING NMBD...";
 870         my $pid = fork();
 871         if ($pid == 0) {
 872                 open STDOUT, ">$env_vars->{NMBD_TEST_LOG}";
 873                 open STDERR, '>&STDOUT';
 874
 875                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 876
 877                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 878                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 879                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 880
 881                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 882                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 883                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 884                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 885                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 886                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 887                 $ENV{UID_WRAPPER_ROOT} = "1";
 888
 889                 $ENV{ENVNAME} = "$ENV{ENVNAME}.nmbd";
 890
 891                 if ($nmbd ne "yes") {
 892                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 893                                 my $signame = shift;
 894                                 print("Skip nmbd received signal $signame");
 895                                 exit 0;
 896                         };
 897                         sleep($self->{server_maxtime});
 898                         exit 0;
 899                 }
 900
 901                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
 902                 my @optargs = ("-d0");
 903                 if (defined($ENV{NMBD_OPTIONS})) {
 904                         @optargs = split(/ /, $ENV{NMBD_OPTIONS});
 905                 }
 906                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 907                 if(defined($ENV{NMBD_VALGRIND})) {
 908                         @preargs = split(/ /, $ENV{NMBD_VALGRIND});
 909                 }
 910                 my @args = ("-F", "--no-process-group",
 911                             "-s", $env_vars->{SERVERCONFFILE},
 912                             "-l", $env_vars->{LOGDIR});
 913                 if (not defined($ENV{NMBD_DONT_LOG_STDOUT})) {
 914                         push(@args, "--log-stdout");
 915                 }
 916
 917                 close($env_vars->{STDIN_PIPE});
 918                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 919
 920                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
 921                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
 922         }
 923         $env_vars->{NMBD_TL_PID} = $pid;
 924         write_pid($env_vars, "nmbd", $pid);
 925         print "DONE\n";
 926
 927         unlink($env_vars->{WINBINDD_TEST_LOG});
 928         print "STARTING WINBINDD...";
 929         $pid = fork();
 930         if ($pid == 0) {
 931                 open STDOUT, ">$env_vars->{WINBINDD_TEST_LOG}";
 932                 open STDERR, '>&STDOUT';
 933
 934                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 935
 936                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 937                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 938                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 939
 940                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 941                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 942                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 943                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 944                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 945                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 946                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
 947                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
 948                 } else {
 949                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
 950                 }
 951                 $ENV{UID_WRAPPER_ROOT} = "1";
 952
 953                 $ENV{ENVNAME} = "$ENV{ENVNAME}.winbindd";
 954
 955                 if ($winbindd ne "yes") {
 956                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 957                                 my $signame = shift;
 958                                 print("Skip winbindd received signal $signame");
 959                                 exit 0;
 960                         };
 961                         sleep($self->{server_maxtime});
 962                         exit 0;
 963                 }
 964
 965                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
 966                 my @optargs = ("-d0");
 967                 if (defined($ENV{WINBINDD_OPTIONS})) {
 968                         @optargs = split(/ /, $ENV{WINBINDD_OPTIONS});
 969                 }
 970                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 971                 if(defined($ENV{WINBINDD_VALGRIND})) {
 972                         @preargs = split(/ /, $ENV{WINBINDD_VALGRIND});
 973                 }
 974                 my @args = ("-F", "--no-process-group",
 975                             "-s", $env_vars->{SERVERCONFFILE},
 976                             "-l", $env_vars->{LOGDIR});
 977                 if (not defined($ENV{WINBINDD_DONT_LOG_STDOUT})) {
 978                         push(@args, "--stdout");
 979                 }
 980
 981                 close($env_vars->{STDIN_PIPE});
 982                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 983
 984                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
 985                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
 986         }
 987         $env_vars->{WINBINDD_TL_PID} = $pid;
 988         write_pid($env_vars, "winbindd", $pid);
 989         print "DONE\n";
 990
 991         unlink($env_vars->{SMBD_TEST_LOG});
 992         print "STARTING SMBD...";
 993         $pid = fork();
 994         if ($pid == 0) {
 995                 open STDOUT, ">$env_vars->{SMBD_TEST_LOG}";
 996                 open STDERR, '>&STDOUT';
 997
 998                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 999
1000                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
1001                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
1002                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
1003
1004                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
1005                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
1006                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
1007                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
1008                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
1009                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
1010                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
1011                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
1012                 } else {
1013                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
1014                 }
1015                 $ENV{UID_WRAPPER_ROOT} = "1";
1016
1017                 $ENV{ENVNAME} = "$ENV{ENVNAME}.smbd";
1018
1019                 if ($smbd ne "yes") {
1020                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
1021                                 my $signame = shift;
1022                                 print("Skip smbd received signal $signame");
1023                                 exit 0;
1024                         };
1025                         sleep($self->{server_maxtime});
1026                         exit 0;
1027                 }
1028
1029                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "smbd");
1030                 my @optargs = ("-d0");
1031                 if (defined($ENV{SMBD_OPTIONS})) {
1032                         @optargs = split(/ /, $ENV{SMBD_OPTIONS});
1033                 }
1034                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
1035                 if(defined($ENV{SMBD_VALGRIND})) {
1036                         @preargs = split(/ /,$ENV{SMBD_VALGRIND});
1037                 }
1038                 my @args = ("-F", "--no-process-group",
1039                             "-s", $env_vars->{SERVERCONFFILE},
1040                             "-l", $env_vars->{LOGDIR});
1041                 if (not defined($ENV{SMBD_DONT_LOG_STDOUT})) {
1042                         push(@args, "--log-stdout");
1043                 }
1044
1045                 close($env_vars->{STDIN_PIPE});
1046                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1047
1048                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1049                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1050         }
1051         $env_vars->{SMBD_TL_PID} = $pid;
1052         write_pid($env_vars, "smbd", $pid);
1053         print "DONE\n";
1054
1055         close(STDIN_READER);
1056
1057         return $self->wait_for_start($env_vars, $nmbd, $winbindd, $smbd);
1058 }
1059
1060 sub createuser($$$$)
1061 {
1062         my ($self, $username, $password, $conffile) = @_;
1063         my $cmd = "UID_WRAPPER_ROOT=1 " . Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $username > /dev/null";
1064         unless (open(PWD, "|$cmd")) {
1065             warn("Unable to set password for $username account\n$cmd");
1066             return undef;
1067         }
1068         print PWD "$password\n$password\n";
1069         unless (close(PWD)) {
1070             warn("Unable to set password for $username account\n$cmd");
1071             return undef;
1072         }
1073         print "DONE\n";
1074 }
1075
1076 sub provision($$$$$$$$)
1077 {
1078         my ($self, $prefix, $server, $password, $extra_options, $dc_server_ip, $dc_server_ipv6, $no_delete_prefix) = @_;
1079
1080         ##
1081         ## setup the various environment variables we need
1082         ##
1083
1084         my $swiface = Samba::get_interface($server);
1085         my %ret = ();
1086         my $server_ip = "127.0.0.$swiface";
1087         my $server_ipv6 = sprintf("fd00:0000:0000:0000:0000:0000:5357:5f%02x", $swiface);
1088         my $domain = "SAMBA-TEST";
1089
1090         my $unix_name = ($ENV{USER} or $ENV{LOGNAME} or `PATH=/usr/ucb:$ENV{PATH} whoami`);
1091         chomp $unix_name;
1092         my $unix_uid = $>;
1093         my $unix_gids_str = $);
1094         my @unix_gids = split(" ", $unix_gids_str);
1095
1096         my $prefix_abs = abs_path($prefix);
1097         my $bindir_abs = abs_path($self->{bindir});
1098
1099         my @dirs = ();
1100
1101         my $shrdir="$prefix_abs/share";
1102         push(@dirs,$shrdir);
1103
1104         my $libdir="$prefix_abs/lib";
1105         push(@dirs,$libdir);
1106
1107         my $piddir="$prefix_abs/pid";
1108         push(@dirs,$piddir);
1109
1110         my $privatedir="$prefix_abs/private";
1111         push(@dirs,$privatedir);
1112
1113         my $lockdir="$prefix_abs/lockdir";
1114         push(@dirs,$lockdir);
1115
1116         my $eventlogdir="$prefix_abs/lockdir/eventlog";
1117         push(@dirs,$eventlogdir);
1118
1119         my $logdir="$prefix_abs/logs";
1120         push(@dirs,$logdir);
1121
1122         my $driver32dir="$shrdir/W32X86";
1123         push(@dirs,$driver32dir);
1124
1125         my $driver64dir="$shrdir/x64";
1126         push(@dirs,$driver64dir);
1127
1128         my $driver40dir="$shrdir/WIN40";
1129         push(@dirs,$driver40dir);
1130
1131         my $ro_shrdir="$shrdir/root-tmp";
1132         push(@dirs,$ro_shrdir);
1133
1134         my $msdfs_shrdir="$shrdir/msdfsshare";
1135         push(@dirs,$msdfs_shrdir);
1136
1137         my $msdfs_deeppath="$msdfs_shrdir/deeppath";
1138         push(@dirs,$msdfs_deeppath);
1139
1140         my $badnames_shrdir="$shrdir/badnames";
1141         push(@dirs,$badnames_shrdir);
1142
1143         my $lease1_shrdir="$shrdir/SMB2_10";
1144         push(@dirs,$lease1_shrdir);
1145
1146         my $lease2_shrdir="$shrdir/SMB3_00";
1147         push(@dirs,$lease2_shrdir);
1148
1149         my $manglenames_shrdir="$shrdir/manglenames";
1150         push(@dirs,$manglenames_shrdir);
1151
1152         my $widelinks_shrdir="$shrdir/widelinks";
1153         push(@dirs,$widelinks_shrdir);
1154
1155         my $widelinks_linkdir="$shrdir/widelinks_foo";
1156         push(@dirs,$widelinks_linkdir);
1157
1158         my $shadow_tstdir="$shrdir/shadow";
1159         push(@dirs,$shadow_tstdir);
1160         my $shadow_mntdir="$shadow_tstdir/mount";
1161         push(@dirs,$shadow_mntdir);
1162         my $shadow_basedir="$shadow_mntdir/base";
1163         push(@dirs,$shadow_basedir);
1164         my $shadow_shrdir="$shadow_basedir/share";
1165         push(@dirs,$shadow_shrdir);
1166
1167         # this gets autocreated by winbindd
1168         my $wbsockdir="$prefix_abs/winbindd";
1169         my $wbsockprivdir="$lockdir/winbindd_privileged";
1170
1171         my $nmbdsockdir="$prefix_abs/nmbd";
1172         unlink($nmbdsockdir);
1173
1174         ##
1175         ## create the test directory layout
1176         ##
1177         die ("prefix_abs = ''") if $prefix_abs eq "";
1178         die ("prefix_abs = '/'") if $prefix_abs eq "/";
1179
1180         mkdir($prefix_abs, 0777);
1181         print "CREATE TEST ENVIRONMENT IN '$prefix'...";
1182         if (not defined($no_delete_prefix) or not $no_delete_prefix) {
1183             system("rm -rf $prefix_abs/*");
1184         }
1185         mkdir($_, 0777) foreach(@dirs);
1186
1187         my $fs_specific_conf = $self->get_fs_specific_conf($shrdir);
1188
1189         ##
1190         ## lockdir and piddir must be 0755
1191         ##
1192         chmod 0755, $lockdir;
1193         chmod 0755, $piddir;
1194
1195
1196         ##
1197         ## create ro and msdfs share layout
1198         ##
1199
1200         chmod 0755, $ro_shrdir;
1201         my $unreadable_file = "$ro_shrdir/unreadable_file";
1202         unless (open(UNREADABLE_FILE, ">$unreadable_file")) {
1203                 warn("Unable to open $unreadable_file");
1204                 return undef;
1205         }
1206         close(UNREADABLE_FILE);
1207         chmod 0600, $unreadable_file;
1208
1209         my $msdfs_target = "$ro_shrdir/msdfs-target";
1210         unless (open(MSDFS_TARGET, ">$msdfs_target")) {
1211                 warn("Unable to open $msdfs_target");
1212                 return undef;
1213         }
1214         close(MSDFS_TARGET);
1215         chmod 0666, $msdfs_target;
1216         symlink "msdfs:$server_ip\\ro-tmp,$server_ipv6\\ro-tmp",
1217                 "$msdfs_shrdir/msdfs-src1";
1218         symlink "msdfs:$server_ipv6\\ro-tmp", "$msdfs_shrdir/deeppath/msdfs-src2";
1219
1220         ##
1221         ## create bad names in $badnames_shrdir
1222         ##
1223         ## (An invalid name, would be mangled to 8.3).
1224         my $badname_target = "$badnames_shrdir/\340|\231\216\377\177";
1225         unless (open(BADNAME_TARGET, ">$badname_target")) {
1226                 warn("Unable to open $badname_target");
1227                 return undef;
1228         }
1229         close(BADNAME_TARGET);
1230         chmod 0666, $badname_target;
1231
1232         ## (A bad name, would not be mangled to 8.3).
1233         my $badname_target = "$badnames_shrdir/\240\276\346\327\377\177";
1234         unless (open(BADNAME_TARGET, ">$badname_target")) {
1235                 warn("Unable to open $badname_target");
1236                 return undef;
1237         }
1238         close(BADNAME_TARGET);
1239         chmod 0666, $badname_target;
1240
1241         ## (A bad good name).
1242         my $badname_target = "$badnames_shrdir/blank.txt";
1243         unless (open(BADNAME_TARGET, ">$badname_target")) {
1244                 warn("Unable to open $badname_target");
1245                 return undef;
1246         }
1247         close(BADNAME_TARGET);
1248         chmod 0666, $badname_target;
1249
1250         ##
1251         ## create mangleable directory names in $manglenames_shrdir
1252         ##
1253         my $manglename_target = "$manglenames_shrdir/foo:bar";
1254         mkdir($manglename_target, 0777);
1255
1256         ##
1257         ## create symlinks for widelinks tests.
1258         ##
1259         my $widelinks_target = "$widelinks_linkdir/target";
1260         unless (open(WIDELINKS_TARGET, ">$widelinks_target")) {
1261                 warn("Unable to open $widelinks_target");
1262                 return undef;
1263         }
1264         close(WIDELINKS_TARGET);
1265         chmod 0666, $widelinks_target;
1266         ##
1267         ## This link should get ACCESS_DENIED
1268         ##
1269         symlink "$widelinks_target", "$widelinks_shrdir/source";
1270         ##
1271         ## This link should be allowed
1272         ##
1273         symlink "$widelinks_shrdir", "$widelinks_shrdir/dot";
1274
1275         my $conffile="$libdir/server.conf";
1276         my $dfqconffile="$libdir/dfq.conf";
1277
1278         my $nss_wrapper_pl = "$ENV{PERL} $self->{srcdir}/lib/nss_wrapper/nss_wrapper.pl";
1279         my $nss_wrapper_passwd = "$privatedir/passwd";
1280         my $nss_wrapper_group = "$privatedir/group";
1281         my $nss_wrapper_hosts = "$ENV{SELFTEST_PREFIX}/hosts";
1282         my $resolv_conf = "$privatedir/resolv.conf";
1283         my $dns_host_file = "$ENV{SELFTEST_PREFIX}/dns_host_file";
1284
1285         my $mod_printer_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/printing/modprinter.pl";
1286
1287         my $fake_snap_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/fake_snap.pl";
1288
1289         my @eventlog_list = ("dns server", "application");
1290
1291         ##
1292         ## calculate uids and gids
1293         ##
1294
1295         my ($max_uid, $max_gid);
1296         my ($uid_nobody, $uid_root, $uid_pdbtest, $uid_pdbtest2, $uid_userdup);
1297         my ($uid_pdbtest_wkn);
1298         my ($uid_force_user);
1299         my ($gid_nobody, $gid_nogroup, $gid_root, $gid_domusers, $gid_domadmins);
1300         my ($gid_userdup, $gid_everyone);
1301         my ($gid_force_user);
1302
1303         if ($unix_uid < 0xffff - 7) {
1304                 $max_uid = 0xffff;
1305         } else {
1306                 $max_uid = $unix_uid;
1307         }
1308
1309         $uid_root = $max_uid - 1;
1310         $uid_nobody = $max_uid - 2;
1311         $uid_pdbtest = $max_uid - 3;
1312         $uid_pdbtest2 = $max_uid - 4;
1313         $uid_userdup = $max_uid - 5;
1314         $uid_pdbtest_wkn = $max_uid - 6;
1315         $uid_force_user = $max_uid - 7;
1316
1317         if ($unix_gids[0] < 0xffff - 8) {
1318                 $max_gid = 0xffff;
1319         } else {
1320                 $max_gid = $unix_gids[0];
1321         }
1322
1323         $gid_nobody = $max_gid - 1;
1324         $gid_nogroup = $max_gid - 2;
1325         $gid_root = $max_gid - 3;
1326         $gid_domusers = $max_gid - 4;
1327         $gid_domadmins = $max_gid - 5;
1328         $gid_userdup = $max_gid - 6;
1329         $gid_everyone = $max_gid - 7;
1330         $gid_force_user = $max_gid - 8;
1331
1332         ##
1333         ## create conffile
1334         ##
1335
1336         unless (open(CONF, ">$conffile")) {
1337                 warn("Unable to open $conffile");
1338                 return undef;
1339         }
1340         print CONF "
1341 [global]
1342         netbios name = $server
1343         interfaces = $server_ip/8 $server_ipv6/64
1344         bind interfaces only = yes
1345         panic action = cd $self->{srcdir} && $self->{srcdir}/selftest/gdb_backtrace %d %\$(MAKE_TEST_BINARY)
1346         smbd:suicide mode = yes
1347
1348         workgroup = $domain
1349
1350         private dir = $privatedir
1351         pid directory = $piddir
1352         lock directory = $lockdir
1353         log file = $logdir/log.\%m
1354         log level = 1
1355         debug pid = yes
1356         max log size = 0
1357
1358         state directory = $lockdir
1359         cache directory = $lockdir
1360
1361         passdb backend = tdbsam
1362
1363         time server = yes
1364
1365         add user script =               $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1366         add group script =              $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action add --name %g
1367         add machine script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1368         add user to group script =      $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action add --member %u --name %g --group_path $nss_wrapper_group
1369         delete user script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action delete --name %u
1370         delete group script =           $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action delete --name %g
1371         delete user from group script = $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action delete --member %u --name %g --group_path $nss_wrapper_group
1372
1373         addprinter command =            $mod_printer_pl -a -s $conffile --
1374         deleteprinter command =         $mod_printer_pl -d -s $conffile --
1375
1376         eventlog list = application \"dns server\"
1377
1378         kernel oplocks = no
1379         kernel change notify = no
1380         smb2 leases = yes
1381
1382         logging = file
1383         printing = bsd
1384         printcap name = /dev/null
1385
1386         winbindd socket directory = $wbsockdir
1387         nmbd:socket dir = $nmbdsockdir
1388         idmap config * : range = 100000-200000
1389         winbind enum users = yes
1390         winbind enum groups = yes
1391         winbind separator = /
1392
1393 #       min receivefile size = 4000
1394
1395         read only = no
1396         server signing = auto
1397
1398         smbd:sharedelay = 100000
1399         smbd:writetimeupdatedelay = 500000
1400         map hidden = no
1401         map system = no
1402         map readonly = no
1403         store dos attributes = yes
1404         create mask = 755
1405         dos filemode = yes
1406         strict rename = yes
1407         strict sync = yes
1408         vfs objects = acl_xattr fake_acls xattr_tdb streams_depot
1409
1410         printing = vlp
1411         print command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb print %p %s
1412         lpq command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpq %p
1413         lp rm command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lprm %p %j
1414         lp pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lppause %p %j
1415         lp resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpresume %p %j
1416         queue pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queuepause %p
1417         queue resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queueresume %p
1418         lpq cache time = 0
1419         print notify backchannel = yes
1420
1421         ncalrpc dir = $prefix_abs/ncalrpc
1422
1423         # The samba3.blackbox.smbclient_s3 test uses this to test that
1424         # sending messages works, and that the %m sub works.
1425         message command = mv %s $shrdir/message.%m
1426
1427         # fsrvp server requires registry shares
1428         registry shares = yes
1429
1430         # Used by RPC SRVSVC tests
1431         add share command = $bindir_abs/smbaddshare
1432         change share command = $bindir_abs/smbchangeshare
1433         delete share command = $bindir_abs/smbdeleteshare
1434
1435         # fruit:copyfile is a global option
1436         fruit:copyfile = yes
1437
1438         #this does not mean that we use non-secure test env,
1439         #it just means we ALLOW one to be configured.
1440         allow insecure wide links = yes
1441
1442         # Begin extra options
1443         $extra_options
1444         # End extra options
1445
1446         #Include user defined custom parameters if set
1447 ";
1448
1449         if (defined($ENV{INCLUDE_CUSTOM_CONF})) {
1450                 print CONF "\t$ENV{INCLUDE_CUSTOM_CONF}\n";
1451         }
1452
1453         print CONF "
1454 [tmp]
1455         path = $shrdir
1456         comment = smb username is [%U]
1457 [tmpsort]
1458         path = $shrdir
1459         comment = Load dirsort module
1460         vfs objects = dirsort acl_xattr fake_acls xattr_tdb streams_depot
1461 [tmpenc]
1462         path = $shrdir
1463         comment = encrypt smb username is [%U]
1464         smb encrypt = required
1465         vfs objects = dirsort
1466 [tmpguest]
1467         path = $shrdir
1468         guest ok = yes
1469 [guestonly]
1470         path = $shrdir
1471         guest only = yes
1472         guest ok = yes
1473 [forceuser]
1474         path = $shrdir
1475         force user = $unix_name
1476         guest ok = yes
1477 [forceuser_unixonly]
1478         comment = force a user with unix user SID and group SID
1479         path = $shrdir
1480         force user = pdbtest
1481         guest ok = yes
1482 [forceuser_wkngroup]
1483         comment = force a user with well-known group SID
1484         path = $shrdir
1485         force user = pdbtest_wkn
1486         guest ok = yes
1487 [forcegroup]
1488         path = $shrdir
1489         force group = nogroup
1490         guest ok = yes
1491 [ro-tmp]
1492         path = $ro_shrdir
1493         guest ok = yes
1494 [write-list-tmp]
1495         path = $shrdir
1496         read only = yes
1497         write list = $unix_name
1498 [valid-users-tmp]
1499         path = $shrdir
1500         valid users = $unix_name
1501 [msdfs-share]
1502         path = $msdfs_shrdir
1503         msdfs root = yes
1504         msdfs shuffle referrals = yes
1505         guest ok = yes
1506 [hideunread]
1507         copy = tmp
1508         hide unreadable = yes
1509 [tmpcase]
1510         copy = tmp
1511         case sensitive = yes
1512 [hideunwrite]
1513         copy = tmp
1514         hide unwriteable files = yes
1515 [durable]
1516         copy = tmp
1517         kernel share modes = no
1518         kernel oplocks = no
1519         posix locking = no
1520 [fs_specific]
1521         copy = tmp
1522         $fs_specific_conf
1523 [print1]
1524         copy = tmp
1525         printable = yes
1526
1527 [print2]
1528         copy = print1
1529 [print3]
1530         copy = print1
1531         default devmode = no
1532 [lp]
1533         copy = print1
1534
1535 [nfs4acl_simple]
1536         path = $shrdir
1537         comment = smb username is [%U]
1538         nfs4:mode = simple
1539         vfs objects = nfs4acl_xattr xattr_tdb
1540
1541 [nfs4acl_special]
1542         path = $shrdir
1543         comment = smb username is [%U]
1544         nfs4:mode = special
1545         vfs objects = nfs4acl_xattr xattr_tdb
1546
1547 [xcopy_share]
1548         path = $shrdir
1549         comment = smb username is [%U]
1550         create mask = 777
1551         force create mode = 777
1552 [posix_share]
1553         path = $shrdir
1554         comment = smb username is [%U]
1555         create mask = 0777
1556         force create mode = 0
1557         directory mask = 0777
1558         force directory mode = 0
1559         vfs objects = xattr_tdb
1560 [aio]
1561         copy = tmp
1562         aio read size = 1
1563         aio write size = 1
1564
1565 [print\$]
1566         copy = tmp
1567
1568 [vfs_fruit]
1569         path = $shrdir
1570         vfs objects = catia fruit streams_xattr acl_xattr
1571         ea support = yes
1572         fruit:ressource = file
1573         fruit:metadata = netatalk
1574         fruit:locking = netatalk
1575         fruit:encoding = native
1576
1577 [badname-tmp]
1578         path = $badnames_shrdir
1579         guest ok = yes
1580
1581 [manglenames_share]
1582         path = $manglenames_shrdir
1583         guest ok = yes
1584
1585 [dynamic_share]
1586         path = $shrdir/%R
1587         guest ok = yes
1588
1589 [widelinks_share]
1590         path = $widelinks_shrdir
1591         wide links = no
1592         guest ok = yes
1593
1594 [fsrvp_share]
1595         path = $shrdir
1596         comment = fake shapshots using rsync
1597         vfs objects = shell_snap shadow_copy2
1598         shell_snap:check path command = $fake_snap_pl --check
1599         shell_snap:create command = $fake_snap_pl --create
1600         shell_snap:delete command = $fake_snap_pl --delete
1601         # a relative path here fails, the snapshot dir is no longer found
1602         shadow:snapdir = $shrdir/.snapshots
1603
1604 [shadow1]
1605         path = $shadow_shrdir
1606         comment = previous versions snapshots under mount point
1607         vfs objects = shadow_copy2
1608         shadow:mountpoint = $shadow_mntdir
1609
1610 [shadow2]
1611         path = $shadow_shrdir
1612         comment = previous versions snapshots outside mount point
1613         vfs objects = shadow_copy2
1614         shadow:mountpoint = $shadow_mntdir
1615         shadow:snapdir = $shadow_tstdir/.snapshots
1616
1617 [shadow3]
1618         path = $shadow_shrdir
1619         comment = previous versions with subvolume snapshots, snapshots under base dir
1620         vfs objects = shadow_copy2
1621         shadow:mountpoint = $shadow_mntdir
1622         shadow:basedir = $shadow_basedir
1623         shadow:snapdir = $shadow_basedir/.snapshots
1624
1625 [shadow4]
1626         path = $shadow_shrdir
1627         comment = previous versions with subvolume snapshots, snapshots outside mount point
1628         vfs objects = shadow_copy2
1629         shadow:mountpoint = $shadow_mntdir
1630         shadow:basedir = $shadow_basedir
1631         shadow:snapdir = $shadow_tstdir/.snapshots
1632
1633 [shadow5]
1634         path = $shadow_shrdir
1635         comment = previous versions at volume root snapshots under mount point
1636         vfs objects = shadow_copy2
1637         shadow:mountpoint = $shadow_shrdir
1638
1639 [shadow6]
1640         path = $shadow_shrdir
1641         comment = previous versions at volume root snapshots outside mount point
1642         vfs objects = shadow_copy2
1643         shadow:mountpoint = $shadow_shrdir
1644         shadow:snapdir = $shadow_tstdir/.snapshots
1645
1646 [shadow7]
1647         path = $shadow_shrdir
1648         comment = previous versions snapshots everywhere
1649         vfs objects = shadow_copy2
1650         shadow:mountpoint = $shadow_mntdir
1651         shadow:snapdirseverywhere = yes
1652
1653 [shadow8]
1654         path = $shadow_shrdir
1655         comment = previous versions using snapsharepath
1656         vfs objects = shadow_copy2
1657         shadow:mountpoint = $shadow_mntdir
1658         shadow:snapdir = $shadow_tstdir/.snapshots
1659         shadow:snapsharepath = share
1660
1661 [shadow_wl]
1662         path = $shadow_shrdir
1663         comment = previous versions with wide links allowed
1664         vfs objects = shadow_copy2
1665         shadow:mountpoint = $shadow_mntdir
1666         wide links = yes
1667 [dfq]
1668         path = $shrdir/dfree
1669         vfs objects = fake_dfq
1670         admin users = $unix_name
1671         include = $dfqconffile
1672         ";
1673         close(CONF);
1674
1675         unless (open(DFQCONF, ">$dfqconffile")) {
1676                 warn("Unable to open $dfqconffile");
1677                 return undef;
1678         }
1679         close(DFQCONF);
1680
1681         ##
1682         ## create a test account
1683         ##
1684
1685         unless (open(PASSWD, ">$nss_wrapper_passwd")) {
1686            warn("Unable to open $nss_wrapper_passwd");
1687            return undef;
1688         }
1689         print PASSWD "nobody:x:$uid_nobody:$gid_nobody:nobody gecos:$prefix_abs:/bin/false
1690 $unix_name:x:$unix_uid:$unix_gids[0]:$unix_name gecos:$prefix_abs:/bin/false
1691 pdbtest:x:$uid_pdbtest:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
1692 pdbtest2:x:$uid_pdbtest2:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
1693 userdup:x:$uid_userdup:$gid_userdup:userdup gecos:$prefix_abs:/bin/false
1694 pdbtest_wkn:x:$uid_pdbtest_wkn:$gid_everyone:pdbtest_wkn gecos:$prefix_abs:/bin/false
1695 force_user:x:$uid_force_user:$gid_force_user:force user gecos:$prefix_abs:/bin/false
1696 ";
1697         if ($unix_uid != 0) {
1698                 print PASSWD "root:x:$uid_root:$gid_root:root gecos:$prefix_abs:/bin/false
1699 ";
1700         }
1701         close(PASSWD);
1702
1703         unless (open(GROUP, ">$nss_wrapper_group")) {
1704              warn("Unable to open $nss_wrapper_group");
1705              return undef;
1706         }
1707         print GROUP "nobody:x:$gid_nobody:
1708 nogroup:x:$gid_nogroup:nobody
1709 $unix_name-group:x:$unix_gids[0]:
1710 domusers:X:$gid_domusers:
1711 domadmins:X:$gid_domadmins:
1712 userdup:x:$gid_userdup:$unix_name
1713 everyone:x:$gid_everyone:
1714 force_user:x:$gid_force_user:
1715 ";
1716         if ($unix_gids[0] != 0) {
1717                 print GROUP "root:x:$gid_root:
1718 ";
1719         }
1720
1721         close(GROUP);
1722
1723         ## hosts
1724         my $hostname = lc($server);
1725         unless (open(HOSTS, ">>$nss_wrapper_hosts")) {
1726                 warn("Unable to open $nss_wrapper_hosts");
1727                 return undef;
1728         }
1729         print HOSTS "${server_ip} ${hostname}.samba.example.com ${hostname}\n";
1730         print HOSTS "${server_ipv6} ${hostname}.samba.example.com ${hostname}\n";
1731         close(HOSTS);
1732
1733         ## hosts
1734         unless (open(RESOLV_CONF, ">$resolv_conf")) {
1735                 warn("Unable to open $resolv_conf");
1736                 return undef;
1737         }
1738         if (defined($dc_server_ip) or defined($dc_server_ipv6)) {
1739                 if (defined($dc_server_ip)) {
1740                         print RESOLV_CONF "nameserver $dc_server_ip\n";
1741                 }
1742                 if (defined($dc_server_ipv6)) {
1743                         print RESOLV_CONF "nameserver $dc_server_ipv6\n";
1744                 }
1745         } else {
1746                 print RESOLV_CONF "nameserver ${server_ip}\n";
1747                 print RESOLV_CONF "nameserver ${server_ipv6}\n";
1748         }
1749         close(RESOLV_CONF);
1750
1751         foreach my $evlog (@eventlog_list) {
1752                 my $evlogtdb = "$eventlogdir/$evlog.tdb";
1753                 open(EVENTLOG, ">$evlogtdb") or die("Unable to open $evlogtdb");
1754                 close(EVENTLOG);
1755         }
1756
1757         $ENV{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1758         $ENV{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1759         $ENV{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
1760         $ENV{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
1761         if ($ENV{SAMBA_DNS_FAKING}) {
1762                 $ENV{RESOLV_WRAPPER_CONF} = $resolv_conf;
1763         } else {
1764                 $ENV{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
1765         }
1766
1767         createuser($self, $unix_name, $password, $conffile) || die("Unable to create user");
1768         createuser($self, "force_user", $password, $conffile) || die("Unable to create force_user");
1769
1770         open(DNS_UPDATE_LIST, ">$prefix/dns_update_list") or die("Unable to open $$prefix/dns_update_list");
1771         print DNS_UPDATE_LIST "A $server. $server_ip\n";
1772         print DNS_UPDATE_LIST "AAAA $server. $server_ipv6\n";
1773         close(DNS_UPDATE_LIST);
1774
1775         $ret{SERVER_IP} = $server_ip;
1776         $ret{SERVER_IPV6} = $server_ipv6;
1777         $ret{NMBD_TEST_LOG} = "$prefix/nmbd_test.log";
1778         $ret{NMBD_TEST_LOG_POS} = 0;
1779         $ret{WINBINDD_TEST_LOG} = "$prefix/winbindd_test.log";
1780         $ret{WINBINDD_TEST_LOG_POS} = 0;
1781         $ret{SMBD_TEST_LOG} = "$prefix/smbd_test.log";
1782         $ret{SMBD_TEST_LOG_POS} = 0;
1783         $ret{SERVERCONFFILE} = $conffile;
1784         $ret{CONFIGURATION} ="-s $conffile";
1785         $ret{SERVER} = $server;
1786         $ret{USERNAME} = $unix_name;
1787         $ret{USERID} = $unix_uid;
1788         $ret{DOMAIN} = $domain;
1789         $ret{NETBIOSNAME} = $server;
1790         $ret{PASSWORD} = $password;
1791         $ret{PIDDIR} = $piddir;
1792         $ret{SELFTEST_WINBINDD_SOCKET_DIR} = $wbsockdir;
1793         $ret{WINBINDD_PRIV_PIPE_DIR} = $wbsockprivdir;
1794         $ret{NMBD_SOCKET_DIR} = $nmbdsockdir;
1795         $ret{SOCKET_WRAPPER_DEFAULT_IFACE} = $swiface;
1796         $ret{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1797         $ret{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1798         $ret{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
1799         $ret{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
1800         $ret{NSS_WRAPPER_MODULE_SO_PATH} = Samba::nss_wrapper_winbind_so_path($self);
1801         $ret{NSS_WRAPPER_MODULE_FN_PREFIX} = "winbind";
1802         if ($ENV{SAMBA_DNS_FAKING}) {
1803                 $ret{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
1804         } else {
1805                 $ret{RESOLV_WRAPPER_CONF} = $resolv_conf;
1806         }
1807         $ret{LOCAL_PATH} = "$shrdir";
1808         $ret{LOGDIR} = $logdir;
1809
1810         #
1811         # Avoid hitting system krb5.conf -
1812         # An env that needs Kerberos will reset this to the real
1813         # value.
1814         #
1815         $ret{KRB5_CONFIG} = abs_path($prefix) . "/no_krb5.conf";
1816
1817         return \%ret;
1818 }
1819
1820 sub wait_for_start($$$$$)
1821 {
1822         my ($self, $envvars, $nmbd, $winbindd, $smbd) = @_;
1823         my $ret;
1824
1825         if ($nmbd eq "yes") {
1826                 my $count = 0;
1827
1828                 # give time for nbt server to register its names
1829                 print "checking for nmbd\n";
1830
1831                 # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
1832                 my $nmblookup = Samba::bindir_path($self, "nmblookup");
1833
1834                 do {
1835                         $ret = system("$nmblookup $envvars->{CONFIGURATION} $envvars->{SERVER}");
1836                         if ($ret != 0) {
1837                                 sleep(1);
1838                         } else {
1839                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
1840                                 system("$nmblookup $envvars->{CONFIGURATION} __SAMBA__");
1841                                 system("$nmblookup $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
1842                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
1843                         }
1844                         $count++;
1845                 } while ($ret != 0 && $count < 10);
1846                 if ($count == 10) {
1847                         print "NMBD not reachable after 10 retries\n";
1848                         teardown_env($self, $envvars);
1849                         return 0;
1850                 }
1851         }
1852
1853         if ($winbindd eq "yes") {
1854             print "checking for winbindd\n";
1855             my $count = 0;
1856             do {
1857                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --ping-dc");
1858                 if ($ret != 0) {
1859                     sleep(2);
1860                 }
1861                 $count++;
1862             } while ($ret != 0 && $count < 10);
1863             if ($count == 10) {
1864                 print "WINBINDD not reachable after 20 seconds\n";
1865                 teardown_env($self, $envvars);
1866                 return 0;
1867             }
1868         }
1869
1870         if ($smbd eq "yes") {
1871             # make sure smbd is also up set
1872             print "wait for smbd\n";
1873
1874             my $count = 0;
1875             do {
1876                 $ret = system(Samba::bindir_path($self, "smbclient") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
1877                 if ($ret != 0) {
1878                     sleep(2);
1879                 }
1880                 $count++
1881             } while ($ret != 0 && $count < 10);
1882             if ($count == 10) {
1883                 print "SMBD failed to start up in a reasonable time (20sec)\n";
1884                 teardown_env($self, $envvars);
1885                 return 0;
1886             }
1887         }
1888
1889         # Ensure we have domain users mapped.
1890         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=513 unixgroup=domusers type=domain");
1891         if ($ret != 0) {
1892             return 1;
1893         }
1894         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=512 unixgroup=domadmins type=domain");
1895         if ($ret != 0) {
1896             return 1;
1897         }
1898         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add sid=S-1-1-0 unixgroup=everyone type=builtin");
1899         if ($ret != 0) {
1900             return 1;
1901         }
1902
1903         if ($winbindd eq "yes") {
1904             # note: creating builtin groups requires winbindd for the
1905             # unix id allocator
1906             $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} sam createbuiltingroup Users");
1907             if ($ret != 0) {
1908                 print "Failed to create BUILTIN\\Users group\n";
1909                 return 0;
1910             }
1911             my $count = 0;
1912             do {
1913                 system(Samba::bindir_path($self, "net") . " $envvars->{CONFIGURATION} cache flush");
1914                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --sid-to-gid=S-1-5-32-545");
1915                 if ($ret != 0) {
1916                     sleep(2);
1917                 }
1918                 $count++;
1919             } while ($ret != 0 && $count < 10);
1920             if ($count == 10) {
1921                 print "WINBINDD not reachable after 20 seconds\n";
1922                 teardown_env($self, $envvars);
1923                 return 0;
1924             }
1925         }
1926
1927         print $self->getlog_env($envvars);
1928
1929         return 1;
1930 }
1931
1932 1;