wscript: Refer to correct ConfigSet variable

[Samba.git] / source3 / modules / vfs_hpuxacl.c

/*
 * Unix SMB/Netbios implementation.
 * VFS module to get and set HP-UX ACLs
 * Copyright (C) Michael Adam 2006,2008
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, see <http://www.gnu.org/licenses/>.
 */

/*
 * This module supports JFS (POSIX) ACLs on VxFS (Veritas * Filesystem).
 * These are available on HP-UX 11.00 if JFS 3.3 is installed.
 * On HP-UX 11i (11.11 and above) these ACLs are supported out of
 * the box.
 *
 * There is another form of ACLs on HFS. These ACLs have a
 * completely different API and their own set of userland tools.
 * Since HFS seems to be considered deprecated, HFS acls
 * are not supported. (They could be supported through a separate
 * vfs-module if there is demand.)
 */

/* =================================================================
 * NOTE:
 *
 * The original hpux-acl code in lib/sysacls.c was based upon the
 * solaris acl code in the same file. Now for the new modularized
 * acl implementation, I have taken the code from vfs_solarisacls.c
 * and did similar adaptations as were done before, essentially
 * reusing the original internal aclsort functions.
 * The check for the presence of the acl() call has been adopted, and
 * a check for the presence of the aclsort() call has been added.
 *
 * Michael Adam <obnox@samba.org>
 *
 * ================================================================= */


#include "includes.h"
#include "system/filesys.h"
#include "smbd/smbd.h"
#include "modules/vfs_hpuxacl.h"


/*
 * including standard header <sys/aclv.h>
 *
 * included here as a quick hack for the special HP-UX-situation:
 *
 * The problem is that, on HP-UX, jfs/posix acls are
 * defined in <sys/aclv.h>, while the deprecated hfs acls
 * are defined inside <sys/acl.h>.
 *
 */
/* GROUP is defined somewhere else so undef it here... */
#undef GROUP
#include <sys/aclv.h>
/* dl.h: needed to check for acl call via shl_findsym */
#include <dl.h>

typedef struct acl HPUX_ACE_T;
typedef struct acl *HPUX_ACL_T;
typedef int HPUX_ACL_TAG_T;   /* the type of an ACL entry */
typedef ushort HPUX_PERM_T;

/* Structure to capture the count for each type of ACE.
 * (for hpux_internal_aclsort */
struct hpux_acl_types {
        int n_user;
        int n_def_user;
        int n_user_obj;
        int n_def_user_obj;

        int n_group;
        int n_def_group;
        int n_group_obj;
        int n_def_group_obj;

        int n_other;
        int n_other_obj;
        int n_def_other_obj;

        int n_class_obj;
        int n_def_class_obj;

        int n_illegal_obj;
};

/* for convenience: check if hpux acl entry is a default entry?  */
#define _IS_DEFAULT(ace) ((ace).a_type & ACL_DEFAULT)
#define _IS_OF_TYPE(ace, type) ( \
        (((type) == SMB_ACL_TYPE_ACCESS) && !_IS_DEFAULT(ace)) \
        || \
        (((type) == SMB_ACL_TYPE_DEFAULT) && _IS_DEFAULT(ace)) \
)


/* prototypes for private functions */

static HPUX_ACL_T hpux_acl_init(int count);
static bool smb_acl_to_hpux_acl(SMB_ACL_T smb_acl,
                HPUX_ACL_T *solariacl, int *count,
                SMB_ACL_TYPE_T type);
static SMB_ACL_T hpux_acl_to_smb_acl(HPUX_ACL_T hpuxacl, int count,
                                     SMB_ACL_TYPE_T type, TALLOC_CTX *mem_ctx);
static HPUX_ACL_TAG_T smb_tag_to_hpux_tag(SMB_ACL_TAG_T smb_tag);
static SMB_ACL_TAG_T hpux_tag_to_smb_tag(HPUX_ACL_TAG_T hpux_tag);
static bool hpux_add_to_acl(HPUX_ACL_T *hpux_acl, int *count,
                HPUX_ACL_T add_acl, int add_count, SMB_ACL_TYPE_T type);
static bool hpux_acl_get_file(const char *name, HPUX_ACL_T *hpuxacl,
                int *count);
static SMB_ACL_PERM_T hpux_perm_to_smb_perm(const HPUX_PERM_T perm);
static HPUX_PERM_T smb_perm_to_hpux_perm(const SMB_ACL_PERM_T perm);
#if 0
static bool hpux_acl_check(HPUX_ACL_T hpux_acl, int count);
#endif
/* aclsort (internal) and helpers: */
static bool hpux_acl_sort(HPUX_ACL_T acl, int count);
static int hpux_internal_aclsort(int acl_count, int calclass, HPUX_ACL_T aclp);
static void hpux_count_obj(int acl_count, HPUX_ACL_T aclp,
                struct hpux_acl_types *acl_type_count);
static void hpux_swap_acl_entries(HPUX_ACE_T *aclp0, HPUX_ACE_T *aclp1);
static bool hpux_prohibited_duplicate_type(int acl_type);

static bool hpux_acl_call_present(void);
static bool hpux_aclsort_call_present(void);


/* public functions - the api */

static SMB_ACL_T hpuxacl_sys_acl_get_file(vfs_handle_struct *handle,
                                const struct smb_filename *smb_fname,
                                SMB_ACL_TYPE_T type,
                                TALLOC_CTX *mem_ctx)
{
        SMB_ACL_T result = NULL;
        int count;
        HPUX_ACL_T hpux_acl = NULL;
        const char *path_p = smb_fname->base_name;

        DEBUG(10, ("hpuxacl_sys_acl_get_file called for file '%s'.\n",
                   path_p));

        if(hpux_acl_call_present() == False) {
                /* Looks like we don't have the acl() system call on HPUX.
                 * May be the system doesn't have the latest version of JFS.
                 */
                goto done;
        }

        if (type != SMB_ACL_TYPE_ACCESS && type != SMB_ACL_TYPE_DEFAULT) {
                DEBUG(10, ("invalid SMB_ACL_TYPE given (%d)\n", type));
                errno = EINVAL;
                goto done;
        }

        DEBUGADD(10, ("getting %s acl\n",
                      ((type == SMB_ACL_TYPE_ACCESS) ? "access" : "default")));

        if (!hpux_acl_get_file(path_p, &hpux_acl, &count)) {
                goto done;
        }
        result = hpux_acl_to_smb_acl(hpux_acl, count, type, mem_ctx);
        if (result == NULL) {
                DEBUG(10, ("conversion hpux_acl -> smb_acl failed (%s).\n",
                           strerror(errno)));
        }

 done:
        DEBUG(10, ("hpuxacl_sys_acl_get_file %s.\n",
                   ((result == NULL) ? "failed" : "succeeded" )));
        SAFE_FREE(hpux_acl);
        return result;
}


/*
 * get the access ACL of a file referred to by a fd
 */
SMB_ACL_T hpuxacl_sys_acl_get_fd(vfs_handle_struct *handle,
                                 files_struct *fsp,
                                 SMB_ACL_TYPE_T type,
                                 TALLOC_CTX *mem_ctx)
{
        /*
         * HPUX doesn't have the facl call. Fake it using the path.... JRA.
         */
        /*
         * We know we're in the same conn context. So we
         * can use the relative path.
         */
        DEBUG(10, ("redirecting call of hpuxacl_sys_acl_get_fd to "
                "hpuxacl_sys_acl_get_file (no facl syscall on HPUX).\n"));

        return hpuxacl_sys_acl_get_file(handle,
                                        fsp->fsp_name->base_name,
                                        type,
                                        mem_ctx);
}


int hpuxacl_sys_acl_set_file(vfs_handle_struct *handle,
                             const struct smb_filename *smb_fname_in,
                             SMB_ACL_TYPE_T type,
                             SMB_ACL_T theacl)
{
        int ret = -1;
        HPUX_ACL_T hpux_acl = NULL;
        int count;
        struct smb_filename *smb_fname = NULL;
        NTSTATUS status;

        DEBUG(10, ("hpuxacl_sys_acl_set_file called for file '%s'\n",
                   name));

        smb_fname = cp_smb_filename(talloc_tos(), smb_fname_in);
        if (smb_fname == NULL) {
                status = NT_STATUS_NO_MEMORY;
                goto done;
        }

        if(hpux_acl_call_present() == False) {
                /* Looks like we don't have the acl() system call on HPUX.
                 * May be the system doesn't have the latest version of JFS.
                 */
                goto done;
        }

        if ((type != SMB_ACL_TYPE_ACCESS) && (type != SMB_ACL_TYPE_DEFAULT)) {
                errno = EINVAL;
                DEBUG(10, ("invalid smb acl type given (%d).\n", type));
                goto done;
        }
        DEBUGADD(10, ("setting %s acl\n",
                      ((type == SMB_ACL_TYPE_ACCESS) ? "access" : "default")));

        if(!smb_acl_to_hpux_acl(theacl, &hpux_acl, &count, type)) {
                DEBUG(10, ("conversion smb_acl -> hpux_acl failed (%s).\n",
                           strerror(errno)));
                goto done;
        }

        /*
         * We can directly use SMB_VFS_STAT here, as if this was a
         * POSIX call on a symlink, we've already refused it.
         * For a Windows acl mapped call on a symlink, we want to follow
         * it.
         */
        ret = SMB_VFS_STAT(handle->conn, smb_fname);
        if (ret != 0) {
                DEBUG(10, ("Error in stat call: %s\n", strerror(errno)));
                goto done;
        }
        if (S_ISDIR(smb_fname->st.st_ex_mode)) {
                /*
                 * if the file is a directory, there is extra work to do:
                 * since the hpux acl call stores both the access acl and
                 * the default acl as provided, we have to get the acl part
                 * that has _not_ been specified in "type" from the file first
                 * and concatenate it with the acl provided.
                 */
                HPUX_ACL_T other_acl;
                int other_count;
                SMB_ACL_TYPE_T other_type;

                other_type = (type == SMB_ACL_TYPE_ACCESS)
                        ? SMB_ACL_TYPE_DEFAULT
                        : SMB_ACL_TYPE_ACCESS;
                DEBUGADD(10, ("getting acl from filesystem\n"));
                if (!hpux_acl_get_file(smb_fname->base_name, &other_acl,
                                       &other_count)) {
                        DEBUG(10, ("error getting acl from directory\n"));
                        goto done;
                }
                DEBUG(10, ("adding %s part of fs acl to given acl\n",
                           ((other_type == SMB_ACL_TYPE_ACCESS)
                            ? "access"
                            : "default")));
                if (!hpux_add_to_acl(&hpux_acl, &count, other_acl,
                                        other_count, other_type))
                {
                        DEBUG(10, ("error adding other acl.\n"));
                        SAFE_FREE(other_acl);
                        goto done;
                }
                SAFE_FREE(other_acl);
        }
        else if (type != SMB_ACL_TYPE_ACCESS) {
                errno = EINVAL;
                goto done;
        }

        if (!hpux_acl_sort(hpux_acl, count)) {
                DEBUG(10, ("resulting acl is not valid!\n"));
                goto done;
        }
        DEBUG(10, ("resulting acl is valid.\n"));

        ret = acl(discard_const_p(char, smb_fname->base_name), ACL_SET, count,
                  hpux_acl);
        if (ret != 0) {
                DEBUG(0, ("ERROR calling acl: %s\n", strerror(errno)));
        }

 done:
        DEBUG(10, ("hpuxacl_sys_acl_set_file %s.\n",
                   ((ret != 0) ? "failed" : "succeeded")));
        TALLOC_FREE(smb_fname);
        SAFE_FREE(hpux_acl);
        return ret;
}

/*
 * set the access ACL on the file referred to by a fd
 */
int hpuxacl_sys_acl_set_fd(vfs_handle_struct *handle,
                              files_struct *fsp,
                              SMB_ACL_TYPE_T type,
                              SMB_ACL_T theacl)
{
        /*
         * HPUX doesn't have the facl call. Fake it using the path.... JRA.
         */
        /*
         * We know we're in the same conn context. So we
         * can use the relative path.
         */
        DEBUG(10, ("redirecting call of hpuxacl_sys_acl_set_fd to "
                "hpuxacl_sys_acl_set_file (no facl syscall on HPUX)\n"));

        return hpuxacl_sys_acl_set_file(handle,
                                        fsp->fsp_name->base_name,
                                        type, theacl);
}

/*
 * delete the default ACL of a directory
 *
 * This is achieved by fetching the access ACL and rewriting it
 * directly, via the hpux system call: the ACL_SET call on
 * directories writes both the access and the default ACL as provided.
 *
 * XXX: posix acl_delete_def_file returns an error if
 * the file referred to by path is not a directory.
 * this function does not complain but the actions
 * have no effect on a file other than a directory.
 * But sys_acl_delete_default_file is only called in
 * smbd/posixacls.c after having checked that the file
 * is a directory, anyways. So implementing the extra
 * check is considered unnecessary. --- Agreed? XXX
 */
int hpuxacl_sys_acl_delete_def_fd(vfs_handle_struct *handle,
                                  files_struct *fsp)
{
        SMB_ACL_T smb_acl;
        int ret = -1;
        HPUX_ACL_T hpux_acl;
        int count;

        DBG_DEBUG("entering hpuxacl_sys_acl_delete_def_fd.\n");

        smb_acl = hpuxacl_sys_acl_get_file(handle, fsp->fsp_name->base_name,
                                           SMB_ACL_TYPE_ACCESS);
        if (smb_acl == NULL) {
                DBG_DEBUG("getting file acl failed!\n");
                goto done;
        }
        if (!smb_acl_to_hpux_acl(smb_acl, &hpux_acl, &count,
                                 SMB_ACL_TYPE_ACCESS))
        {
                DBG_DEBUG("conversion smb_acl -> hpux_acl failed.\n");
                goto done;
        }
        if (!hpux_acl_sort(hpux_acl, count)) {
                DBG_DEBUG("resulting acl is not valid!\n");
                goto done;
        }
        ret = acl(discard_const_p(char, fsp->fsp_name->base_name),
                                ACL_SET, count, hpux_acl);
        if (ret != 0) {
                DBG_DEBUG("settinge file acl failed!\n");
        }

 done:
        DBG_DEBUG("hpuxacl_sys_acl_delete_def_fd %s.\n",
                  ((ret != 0) ? "failed" : "succeeded" ));
        TALLOC_FREE(smb_acl);
        return ret;
}

/*
 * private functions
 */

static HPUX_ACL_T hpux_acl_init(int count)
{
        HPUX_ACL_T hpux_acl =
                (HPUX_ACL_T)SMB_MALLOC(sizeof(HPUX_ACE_T) * count);
        if (hpux_acl == NULL) {
                errno = ENOMEM;
        }
        return hpux_acl;
}

/*
 * Convert the SMB acl to the ACCESS or DEFAULT part of a
 * hpux ACL, as desired.
 */
static bool smb_acl_to_hpux_acl(SMB_ACL_T smb_acl,
                                   HPUX_ACL_T *hpux_acl, int *count,
                                   SMB_ACL_TYPE_T type)
{
        bool ret = False;
        int i;
        int check_which, check_rc;

        DEBUG(10, ("entering smb_acl_to_hpux_acl\n"));

        *hpux_acl = NULL;
        *count = 0;

        for (i = 0; i < smb_acl->count; i++) {
                const struct smb_acl_entry *smb_entry = &(smb_acl->acl[i]);
                HPUX_ACE_T hpux_entry;

                ZERO_STRUCT(hpux_entry);

                hpux_entry.a_type = smb_tag_to_hpux_tag(smb_entry->a_type);
                if (hpux_entry.a_type == 0) {
                        DEBUG(10, ("smb_tag to hpux_tag failed\n"));
                        goto fail;
                }
                switch(hpux_entry.a_type) {
                case USER:
                        DEBUG(10, ("got tag type USER with uid %d\n",
                                   smb_entry->info.user.uid));
                        hpux_entry.a_id = (uid_t)smb_entry->info.user.uid;
                        break;
                case GROUP:
                        DEBUG(10, ("got tag type GROUP with gid %d\n",
                                   smb_entry->info.group.gid));
                        hpux_entry.a_id = (uid_t)smb_entry->info.group.gid;
                        break;
                default:
                        break;
                }
                if (type == SMB_ACL_TYPE_DEFAULT) {
                        DEBUG(10, ("adding default bit to hpux ace\n"));
                        hpux_entry.a_type |= ACL_DEFAULT;
                }

                hpux_entry.a_perm =
                        smb_perm_to_hpux_perm(smb_entry->a_perm);
                DEBUG(10, ("assembled the following hpux ace:\n"));
                DEBUGADD(10, (" - type: 0x%04x\n", hpux_entry.a_type));
                DEBUGADD(10, (" - id: %d\n", hpux_entry.a_id));
                DEBUGADD(10, (" - perm: o%o\n", hpux_entry.a_perm));
                if (!hpux_add_to_acl(hpux_acl, count, &hpux_entry,
                                        1, type))
                {
                        DEBUG(10, ("error adding acl entry\n"));
                        goto fail;
                }
                DEBUG(10, ("count after adding: %d (i: %d)\n", *count, i));
                DEBUG(10, ("test, if entry has been copied into acl:\n"));
                DEBUGADD(10, (" - type: 0x%04x\n",
                              (*hpux_acl)[(*count)-1].a_type));
                DEBUGADD(10, (" - id: %d\n",
                              (*hpux_acl)[(*count)-1].a_id));
                DEBUGADD(10, (" - perm: o%o\n",
                              (*hpux_acl)[(*count)-1].a_perm));
        }

        ret = True;
        goto done;

 fail:
        SAFE_FREE(*hpux_acl);
 done:
        DEBUG(10, ("smb_acl_to_hpux_acl %s\n",
                   ((ret == True) ? "succeeded" : "failed")));
        return ret;
}

/*
 * convert either the access or the default part of a
 * soaris acl to the SMB_ACL format.
 */
static SMB_ACL_T hpux_acl_to_smb_acl(HPUX_ACL_T hpux_acl, int count,
                                     SMB_ACL_TYPE_T type, TALLOC_CTX *mem_ctx)
{
        SMB_ACL_T result;
        int i;

        if ((result = sys_acl_init(mem_ctx)) == NULL) {
                DEBUG(10, ("error allocating memory for SMB_ACL\n"));
                goto fail;
        }
        for (i = 0; i < count; i++) {
                SMB_ACL_ENTRY_T smb_entry;
                SMB_ACL_PERM_T smb_perm;

                if (!_IS_OF_TYPE(hpux_acl[i], type)) {
                        continue;
                }
                result->acl = talloc_realloc(result, result->acl, struct smb_acl_entry, result->count + 1);
                if (result->acl == NULL) {
                        DEBUG(10, ("error reallocating memory for SMB_ACL\n"));
                        goto fail;
                }
                smb_entry = &result->acl[result->count];
                if (sys_acl_set_tag_type(smb_entry,
                                         hpux_tag_to_smb_tag(hpux_acl[i].a_type)) != 0)
                {
                        DEBUG(10, ("invalid tag type given: 0x%04x\n",
                                   hpux_acl[i].a_type));
                        goto fail;
                }
                /* intentionally not checking return code here: */
                sys_acl_set_qualifier(smb_entry, (void *)&hpux_acl[i].a_id);
                smb_perm = hpux_perm_to_smb_perm(hpux_acl[i].a_perm);
                if (sys_acl_set_permset(smb_entry, &smb_perm) != 0) {
                        DEBUG(10, ("invalid permset given: %d\n",
                                   hpux_acl[i].a_perm));
                        goto fail;
                }
                result->count += 1;
        }
        goto done;
 fail:
        TALLOC_FREE(result);
 done:
        DEBUG(10, ("hpux_acl_to_smb_acl %s\n",
                   ((result == NULL) ? "failed" : "succeeded")));
        return result;
}



static HPUX_ACL_TAG_T smb_tag_to_hpux_tag(SMB_ACL_TAG_T smb_tag)
{
        HPUX_ACL_TAG_T hpux_tag = 0;

        DEBUG(10, ("smb_tag_to_hpux_tag\n"));
        DEBUGADD(10, (" --> got smb tag 0x%04x\n", smb_tag));

        switch (smb_tag) {
        case SMB_ACL_USER:
                hpux_tag = USER;
                break;
        case SMB_ACL_USER_OBJ:
                hpux_tag = USER_OBJ;
                break;
        case SMB_ACL_GROUP:
                hpux_tag = GROUP;
                break;
        case SMB_ACL_GROUP_OBJ:
                hpux_tag = GROUP_OBJ;
                break;
        case SMB_ACL_OTHER:
                hpux_tag = OTHER_OBJ;
                break;
        case SMB_ACL_MASK:
                hpux_tag = CLASS_OBJ;
                break;
        default:
                DEBUGADD(10, (" !!! unknown smb tag type 0x%04x\n", smb_tag));
                break;
        }

        DEBUGADD(10, (" --> determined hpux tag 0x%04x\n", hpux_tag));

        return hpux_tag;
}

static SMB_ACL_TAG_T hpux_tag_to_smb_tag(HPUX_ACL_TAG_T hpux_tag)
{
        SMB_ACL_TAG_T smb_tag = 0;

        DEBUG(10, ("hpux_tag_to_smb_tag:\n"));
        DEBUGADD(10, (" --> got hpux tag 0x%04x\n", hpux_tag));

        hpux_tag &= ~ACL_DEFAULT;

        switch (hpux_tag) {
        case USER:
                smb_tag = SMB_ACL_USER;
                break;
        case USER_OBJ:
                smb_tag = SMB_ACL_USER_OBJ;
                break;
        case GROUP:
                smb_tag = SMB_ACL_GROUP;
                break;
        case GROUP_OBJ:
                smb_tag = SMB_ACL_GROUP_OBJ;
                break;
        case OTHER_OBJ:
                smb_tag = SMB_ACL_OTHER;
                break;
        case CLASS_OBJ:
                smb_tag = SMB_ACL_MASK;
                break;
        default:
                DEBUGADD(10, (" !!! unknown hpux tag type: 0x%04x\n",
                                        hpux_tag));
                break;
        }

        DEBUGADD(10, (" --> determined smb tag 0x%04x\n", smb_tag));

        return smb_tag;
}


/*
 * The permission bits used in the following two permission conversion
 * functions are same, but the functions make us independent of the concrete
 * permission data types.
 */
static SMB_ACL_PERM_T hpux_perm_to_smb_perm(const HPUX_PERM_T perm)
{
        SMB_ACL_PERM_T smb_perm = 0;
        smb_perm |= ((perm & SMB_ACL_READ) ? SMB_ACL_READ : 0);
        smb_perm |= ((perm & SMB_ACL_WRITE) ? SMB_ACL_WRITE : 0);
        smb_perm |= ((perm & SMB_ACL_EXECUTE) ? SMB_ACL_EXECUTE : 0);
        return smb_perm;
}


static HPUX_PERM_T smb_perm_to_hpux_perm(const SMB_ACL_PERM_T perm)
{
        HPUX_PERM_T hpux_perm = 0;
        hpux_perm |= ((perm & SMB_ACL_READ) ? SMB_ACL_READ : 0);
        hpux_perm |= ((perm & SMB_ACL_WRITE) ? SMB_ACL_WRITE : 0);
        hpux_perm |= ((perm & SMB_ACL_EXECUTE) ? SMB_ACL_EXECUTE : 0);
        return hpux_perm;
}


static bool hpux_acl_get_file(const char *name, HPUX_ACL_T *hpux_acl,
                                 int *count)
{
        bool result = False;
        static HPUX_ACE_T dummy_ace;

        DEBUG(10, ("hpux_acl_get_file called for file '%s'\n", name));

        /*
         * The original code tries some INITIAL_ACL_SIZE
         * and only did the ACL_CNT call upon failure
         * (for performance reasons).
         * For the sake of simplicity, I skip this for now.
         *
         * NOTE: There is a catch here on HP-UX: acl with cmd parameter
         * ACL_CNT fails with errno EINVAL when called with a NULL
         * pointer as last argument. So we need to use a dummy acl
         * struct here (we make it static so it does not need to be
         * instantiated or malloced each time this function is
         * called). Btw: the count parameter does not seem to matter...
         */
        *count = acl(discard_const_p(char, name), ACL_CNT, 0, &dummy_ace);
        if (*count < 0) {
                DEBUG(10, ("acl ACL_CNT failed: %s\n", strerror(errno)));
                goto done;
        }
        *hpux_acl = hpux_acl_init(*count);
        if (*hpux_acl == NULL) {
                DEBUG(10, ("error allocating memory for hpux acl...\n"));
                goto done;
        }
        *count = acl(discard_const_p(char, name), ACL_GET, *count, *hpux_acl);
        if (*count < 0) {
                DEBUG(10, ("acl ACL_GET failed: %s\n", strerror(errno)));
                goto done;
        }
        result = True;

 done:
        DEBUG(10, ("hpux_acl_get_file %s.\n",
                   ((result == True) ? "succeeded" : "failed" )));
        return result;
}




/*
 * Add entries to a hpux ACL.
 *
 * Entries are directly added to the hpuxacl parameter.
 * if memory allocation fails, this may result in hpuxacl
 * being NULL. if the resulting acl is to be checked and is
 * not valid, it is kept in hpuxacl but False is returned.
 *
 * The type of ACEs (access/default) to be added to the ACL can
 * be selected via the type parameter.
 * I use the SMB_ACL_TYPE_T type here. Since SMB_ACL_TYPE_ACCESS
 * is defined as "0", this means that one can only add either
 * access or default ACEs from the given ACL, not both at the same
 * time. If it should become necessary to add all of an ACL, one
 * would have to replace this parameter by another type.
 */
static bool hpux_add_to_acl(HPUX_ACL_T *hpux_acl, int *count,
                               HPUX_ACL_T add_acl, int add_count,
                               SMB_ACL_TYPE_T type)
{
        int i;

        if ((type != SMB_ACL_TYPE_ACCESS) && (type != SMB_ACL_TYPE_DEFAULT))
        {
                DEBUG(10, ("invalid acl type given: %d\n", type));
                errno = EINVAL;
                return False;
        }
        for (i = 0; i < add_count; i++) {
                if (!_IS_OF_TYPE(add_acl[i], type)) {
                        continue;
                }
                ADD_TO_ARRAY(NULL, HPUX_ACE_T, add_acl[i],
                             hpux_acl, count);
                if (hpux_acl == NULL) {
                        DEBUG(10, ("error enlarging acl.\n"));
                        errno = ENOMEM;
                        return False;
                }
        }
        return True;
}


/*
 * sort the ACL and check it for validity
 *
 * [original comment from lib/sysacls.c:]
 *
 * if it's a minimal ACL with only 4 entries then we
 * need to recalculate the mask permissions to make
 * sure that they are the same as the GROUP_OBJ
 * permissions as required by the UnixWare acl() system call.
 *
 * (note: since POSIX allows minimal ACLs which only contain
 * 3 entries - ie there is no mask entry - we should, in theory,
 * check for this and add a mask entry if necessary - however
 * we "know" that the caller of this interface always specifies
 * a mask, so in practice "this never happens" (tm) - if it *does*
 * happen aclsort() will fail and return an error and someone will
 * have to fix it...)
 */
static bool hpux_acl_sort(HPUX_ACL_T hpux_acl, int count)
{
        int fixmask = (count <= 4);

        if (hpux_internal_aclsort(count, fixmask, hpux_acl) != 0) {
                errno = EINVAL;
                return False;
        }
        return True;
}


/*
 * Helpers for hpux_internal_aclsort:
 *   - hpux_count_obj
 *   - hpux_swap_acl_entries
 *   - hpux_prohibited_duplicate_type
 *   - hpux_get_needed_class_perm
 */

/* hpux_count_obj:
 * Counts the different number of objects in a given array of ACL
 * structures.
 * Inputs:
 *
 * acl_count      - Count of ACLs in the array of ACL structures.
 * aclp           - Array of ACL structures.
 * acl_type_count - Pointer to acl_types structure. Should already be
 *                  allocated.
 * Output:
 *
 * acl_type_count - This structure is filled up with counts of various
 *                  acl types.
 */

static void hpux_count_obj(int acl_count, HPUX_ACL_T aclp, struct hpux_acl_types *acl_type_count)
{
        int i;

        memset(acl_type_count, 0, sizeof(struct hpux_acl_types));

        for(i=0;i<acl_count;i++) {
                switch(aclp[i].a_type) {
                case USER:
                        acl_type_count->n_user++;
                        break;
                case USER_OBJ:
                        acl_type_count->n_user_obj++;
                        break;
                case DEF_USER_OBJ:
                        acl_type_count->n_def_user_obj++;
                        break;
                case GROUP:
                        acl_type_count->n_group++;
                        break;
                case GROUP_OBJ:
                        acl_type_count->n_group_obj++;
                        break;
                case DEF_GROUP_OBJ:
                        acl_type_count->n_def_group_obj++;
                        break;
                case OTHER_OBJ:
                        acl_type_count->n_other_obj++;
                        break;
                case DEF_OTHER_OBJ:
                        acl_type_count->n_def_other_obj++;
                        break;
                case CLASS_OBJ:
                        acl_type_count->n_class_obj++;
                        break;
                case DEF_CLASS_OBJ:
                        acl_type_count->n_def_class_obj++;
                        break;
                case DEF_USER:
                        acl_type_count->n_def_user++;
                        break;
                case DEF_GROUP:
                        acl_type_count->n_def_group++;
                        break;
                default:
                        acl_type_count->n_illegal_obj++;
                        break;
                }
        }
}

/* hpux_swap_acl_entries:  Swaps two ACL entries.
 *
 * Inputs: aclp0, aclp1 - ACL entries to be swapped.
 */

static void hpux_swap_acl_entries(HPUX_ACE_T *aclp0, HPUX_ACE_T *aclp1)
{
        HPUX_ACE_T temp_acl;

        temp_acl.a_type = aclp0->a_type;
        temp_acl.a_id = aclp0->a_id;
        temp_acl.a_perm = aclp0->a_perm;

        aclp0->a_type = aclp1->a_type;
        aclp0->a_id = aclp1->a_id;
        aclp0->a_perm = aclp1->a_perm;

        aclp1->a_type = temp_acl.a_type;
        aclp1->a_id = temp_acl.a_id;
        aclp1->a_perm = temp_acl.a_perm;
}

/* hpux_prohibited_duplicate_type
 * Identifies if given ACL type can have duplicate entries or
 * not.
 *
 * Inputs: acl_type - ACL Type.
 *
 * Outputs:
 *
 * Return..
 *
 * True - If the ACL type matches any of the prohibited types.
 * False - If the ACL type doesn't match any of the prohibited types.
 */

static bool hpux_prohibited_duplicate_type(int acl_type)
{
        switch(acl_type) {
                case USER:
                case GROUP:
                case DEF_USER:
                case DEF_GROUP:
                        return True;
                default:
                        return False;
        }
}

/* hpux_get_needed_class_perm
 * Returns the permissions of a ACL structure only if the ACL
 * type matches one of the pre-determined types for computing
 * CLASS_OBJ permissions.
 *
 * Inputs: aclp - Pointer to ACL structure.
 */

static int hpux_get_needed_class_perm(struct acl *aclp)
{
        switch(aclp->a_type) {
                case USER:
                case GROUP_OBJ:
                case GROUP:
                case DEF_USER_OBJ:
                case DEF_USER:
                case DEF_GROUP_OBJ:
                case DEF_GROUP:
                case DEF_CLASS_OBJ:
                case DEF_OTHER_OBJ:
                        return aclp->a_perm;
                default:
                        return 0;
        }
}

/* hpux_internal_aclsort: aclsort for HPUX.
 *
 * -> The aclsort() system call is available on the latest HPUX General
 * -> Patch Bundles. So for HPUX, we developed our version of aclsort
 * -> function. Because, we don't want to update to a new
 * -> HPUX GR bundle just for aclsort() call.
 *
 * aclsort sorts the array of ACL structures as per the description in
 * aclsort man page. Refer to aclsort man page for more details
 *
 * Inputs:
 *
 * acl_count - Count of ACLs in the array of ACL structures.
 * calclass  - If this is not zero, then we compute the CLASS_OBJ
 *             permissions.
 * aclp      - Array of ACL structures.
 *
 * Outputs:
 *
 * aclp     - Sorted array of ACL structures.
 *
 * Outputs:
 *
 * Returns 0 for success -1 for failure. Prints a message to the Samba
 * debug log in case of failure.
 */

static int hpux_internal_aclsort(int acl_count, int calclass, HPUX_ACL_T aclp)
{
        struct hpux_acl_types acl_obj_count;
        int n_class_obj_perm = 0;
        int i, j;

        DEBUG(10,("Entering hpux_internal_aclsort. (calclass = %d)\n", calclass));

        if (hpux_aclsort_call_present()) {
                DEBUG(10, ("calling hpux aclsort\n"));
                return aclsort(acl_count, calclass, aclp);
        }

        DEBUG(10, ("using internal aclsort\n"));

        if(!acl_count) {
                DEBUG(10,("Zero acl count passed. Returning Success\n"));
                return 0;
        }

        if(aclp == NULL) {
                DEBUG(0,("Null ACL pointer in hpux_acl_sort. Returning Failure. \n"));
                return -1;
        }

        /* Count different types of ACLs in the ACLs array */

        hpux_count_obj(acl_count, aclp, &acl_obj_count);

        /* There should be only one entry each of type USER_OBJ, GROUP_OBJ,
         * CLASS_OBJ and OTHER_OBJ
         */

        if ( (acl_obj_count.n_user_obj  != 1) ||
                (acl_obj_count.n_group_obj != 1) ||
                (acl_obj_count.n_class_obj != 1) ||
                (acl_obj_count.n_other_obj != 1) )
        {
                DEBUG(0,("hpux_internal_aclsort: More than one entry or no entries for \
USER OBJ or GROUP_OBJ or OTHER_OBJ or CLASS_OBJ\n"));
                return -1;
        }

        /* If any of the default objects are present, there should be only
         * one of them each.
         */

        if ( (acl_obj_count.n_def_user_obj  > 1) ||
                (acl_obj_count.n_def_group_obj > 1) ||
                (acl_obj_count.n_def_other_obj > 1) ||
                (acl_obj_count.n_def_class_obj > 1) )
        {
                DEBUG(0,("hpux_internal_aclsort: More than one entry for DEF_CLASS_OBJ \
or DEF_USER_OBJ or DEF_GROUP_OBJ or DEF_OTHER_OBJ\n"));
                return -1;
        }

        /* We now have proper number of OBJ and DEF_OBJ entries. Now sort the acl
         * structures.
         *
         * Sorting crieteria - First sort by ACL type. If there are multiple entries of
         * same ACL type, sort by ACL id.
         *
         * I am using the trivial kind of sorting method here because, performance isn't
         * really effected by the ACLs feature. More over there aren't going to be more
         * than 17 entries on HPUX.
         */

        for(i=0; i<acl_count;i++) {
                for (j=i+1; j<acl_count; j++) {
                        if( aclp[i].a_type > aclp[j].a_type ) {
                                /* ACL entries out of order, swap them */
                                hpux_swap_acl_entries((aclp+i), (aclp+j));
                        } else if ( aclp[i].a_type == aclp[j].a_type ) {
                                /* ACL entries of same type, sort by id */
                                if(aclp[i].a_id > aclp[j].a_id) {
                                        hpux_swap_acl_entries((aclp+i), (aclp+j));
                                } else if (aclp[i].a_id == aclp[j].a_id) {
                                        /* We have a duplicate entry. */
                                        if(hpux_prohibited_duplicate_type(aclp[i].a_type)) {
                                                DEBUG(0, ("hpux_internal_aclsort: Duplicate entry: Type(hex): %x Id: %d\n",
                                                        aclp[i].a_type, aclp[i].a_id));
                                                return -1;
                                        }
                                }
                        }
                }
        }

        /* set the class obj permissions to the computed one. */
        if(calclass) {
                int n_class_obj_index = -1;

                for(i=0;i<acl_count;i++) {
                        n_class_obj_perm |= hpux_get_needed_class_perm((aclp+i));

                        if(aclp[i].a_type == CLASS_OBJ)
                                n_class_obj_index = i;
                }
                aclp[n_class_obj_index].a_perm = n_class_obj_perm;
        }

        return 0;
}


/*
 * hpux_acl_call_present:
 *
 * This checks if the POSIX ACL system call is defined
 * which basically corresponds to whether JFS 3.3 or
 * higher is installed. If acl() was called when it
 * isn't defined, it causes the process to core dump
 * so it is important to check this and avoid acl()
 * calls if it isn't there.
 */

static bool hpux_acl_call_present(void)
{

        shl_t handle = NULL;
        void *value;
        int ret_val=0;
        static bool already_checked = False;

        if(already_checked)
                return True;

        errno = 0;

        ret_val = shl_findsym(&handle, "acl", TYPE_PROCEDURE, &value);

        if(ret_val != 0) {
                DEBUG(5, ("hpux_acl_call_present: shl_findsym() returned %d, errno = %d, error %s\n",
                        ret_val, errno, strerror(errno)));
                DEBUG(5,("hpux_acl_call_present: acl() system call is not present. Check if you have JFS 3.3 and above?\n"));
                errno = ENOSYS;
                return False;
        }

        DEBUG(10,("hpux_acl_call_present: acl() system call is present. We have JFS 3.3 or above \n"));

        already_checked = True;
        return True;
}

/*
 * runtime check for presence of aclsort library call.
 * same code as for acl call. if there are more of these,
 * a dispatcher function could be handy...
 */

static bool hpux_aclsort_call_present(void)
{
        shl_t handle = NULL;
        void *value;
        int ret_val = 0;
        static bool already_checked = False;

        if (already_checked) {
                return True;
        }

        errno = 0;
        ret_val = shl_findsym(&handle, "aclsort", TYPE_PROCEDURE, &value);
        if (ret_val != 0) {
                DEBUG(5, ("hpux_aclsort_call_present: shl_findsym "
                        "returned %d, errno = %d, error %s",
                        ret_val, errno, strerror(errno)));
                DEBUG(5, ("hpux_aclsort_call_present: "
                        "aclsort() function not available.\n"));
                return False;
        }
        DEBUG(10,("hpux_aclsort_call_present: aclsort() function present.\n"));
        already_checked = True;
        return True;
}

#if 0
/*
 * acl check function:
 *   unused at the moment but could be used to get more
 *   concrete error messages for debugging...
 *   (acl sort just says that the acl is invalid...)
 */
static bool hpux_acl_check(HPUX_ACL_T hpux_acl, int count)
{
        int check_rc;
        int check_which;

        check_rc = aclcheck(hpux_acl, count, &check_which);
        if (check_rc != 0) {
                DEBUG(10, ("acl is not valid:\n"));
                DEBUGADD(10, (" - return code: %d\n", check_rc));
                DEBUGADD(10, (" - which: %d\n", check_which));
                if (check_which != -1) {
                        DEBUGADD(10, (" - invalid entry:\n"));
                        DEBUGADD(10, ("   * type: %d:\n",
                                      hpux_acl[check_which].a_type));
                        DEBUGADD(10, ("   * id: %d\n",
                                      hpux_acl[check_which].a_id));
                        DEBUGADD(10, ("   * perm: 0o%o\n",
                                      hpux_acl[check_which].a_perm));
                }
                return False;
        }
        return True;
}
#endif

/* VFS operations structure */

static struct vfs_fn_pointers hpuxacl_fns = {
        .sys_acl_get_fd_fn = hpuxacl_sys_acl_get_fd,
        .sys_acl_blob_get_fd_fn = posix_sys_acl_blob_get_fd,
        sys_acl_set_fd_fn = hpuxacl_sys_acl_set_fd,
        .sys_acl_delete_def_fd_fn = hpuxacl_sys_acl_delete_def_fd,
};

static_decl_vfs;
NTSTATUS vfs_hpuxacl_init(TALLOC_CTX *ctx)
{
        return smb_register_vfs(SMB_VFS_INTERFACE_VERSION, "hpuxacl",
                                &hpuxacl_fns);
}

/* ENTE */