selftest/target/Samba3.pm

   1 #!/usr/bin/perl
   2 # Bootstrap Samba and run a number of tests against it.
   3 # Copyright (C) 2005-2007 Jelmer Vernooij <jelmer@samba.org>
   4 # Published under the GNU GPL, v3 or later.
   5
   6 package Samba3;
   7
   8 use strict;
   9 use Cwd qw(abs_path);
  10 use FindBin qw($RealBin);
  11 use POSIX;
  12 use target::Samba;
  13
  14 sub have_ads($) {
  15         my ($self) = @_;
  16         my $found_ads = 0;
  17         my $smbd_build_options = Samba::bindir_path($self, "smbd") . " -b|";
  18         open(IN, $smbd_build_options) or die("Unable to run $smbd_build_options: $!");
  19
  20         while (<IN>) {
  21                 if (/WITH_ADS/) {
  22                        $found_ads = 1;
  23                 }
  24         }
  25         close IN;
  26
  27         # If we were not built with ADS support, pretend we were never even available
  28         print "smbd does not have ADS support\n" unless $found_ads;
  29         return $found_ads;
  30 }
  31
  32 # return smb.conf parameters applicable to @path, based on the underlying
  33 # filesystem type
  34 sub get_fs_specific_conf($$)
  35 {
  36         my ($self, $path) = @_;
  37         my $mods = "";
  38         my $stat_out = `stat --file-system $path` or return "";
  39
  40         if ($stat_out =~ m/Type:\s+btrfs/) {
  41                 $mods .= "btrfs ";
  42         }
  43
  44         if ($mods) {
  45                 return "vfs objects = $mods";
  46         }
  47
  48         return undef;
  49 }
  50
  51 sub new($$) {
  52         my ($classname, $bindir, $binary_mapping, $srcdir, $server_maxtime) = @_;
  53         my $self = { vars => {},
  54                      bindir => $bindir,
  55                      binary_mapping => $binary_mapping,
  56                      srcdir => $srcdir,
  57                      server_maxtime => $server_maxtime
  58         };
  59         bless $self;
  60         return $self;
  61 }
  62
  63 sub teardown_env($$)
  64 {
  65         my ($self, $envvars) = @_;
  66         my $count = 0;
  67
  68         # This should cause smbd to terminate gracefully
  69         close($envvars->{STDIN_PIPE});
  70
  71         my $smbdpid = $envvars->{SMBD_TL_PID};
  72         my $nmbdpid = $envvars->{NMBD_TL_PID};
  73         my $winbinddpid = $envvars->{WINBINDD_TL_PID};
  74
  75         # This should give it time to write out the gcov data
  76         until ($count > 20) {
  77             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  78             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
  79             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
  80             if ($smbdchild == -1
  81                 && $nmbdchild == -1
  82                 && $winbinddchild == -1) {
  83                 last;
  84             }
  85             sleep(1);
  86             $count++;
  87         }
  88
  89         if ($count <= 20 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
  90             return;
  91         }
  92
  93         $self->stop_sig_term($smbdpid);
  94         $self->stop_sig_term($nmbdpid);
  95         $self->stop_sig_term($winbinddpid);
  96
  97         $count = 0;
  98         until ($count > 10) {
  99             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
 100             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
 101             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
 102             if ($smbdchild == -1
 103                 && $nmbdchild == -1
 104                 && $winbinddchild == -1) {
 105                 last;
 106             }
 107             sleep(1);
 108             $count++;
 109         }
 110
 111         if ($count <= 10 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
 112             return;
 113         }
 114
 115         warn("timelimit process did not quit on SIGTERM, sending SIGKILL");
 116         $self->stop_sig_kill($smbdpid);
 117         $self->stop_sig_kill($nmbdpid);
 118         $self->stop_sig_kill($winbinddpid);
 119
 120         return 0;
 121 }
 122
 123 sub getlog_env_app($$$)
 124 {
 125         my ($self, $envvars, $name) = @_;
 126
 127         my $title = "$name LOG of: $envvars->{NETBIOSNAME}\n";
 128         my $out = $title;
 129
 130         open(LOG, "<".$envvars->{$name."_TEST_LOG"});
 131
 132         seek(LOG, $envvars->{$name."_TEST_LOG_POS"}, SEEK_SET);
 133         while (<LOG>) {
 134                 $out .= $_;
 135         }
 136         $envvars->{$name."_TEST_LOG_POS"} = tell(LOG);
 137         close(LOG);
 138
 139         return "" if $out eq $title;
 140
 141         return $out;
 142 }
 143
 144 sub getlog_env($$)
 145 {
 146         my ($self, $envvars) = @_;
 147         my $ret = "";
 148
 149         $ret .= $self->getlog_env_app($envvars, "SMBD");
 150         $ret .= $self->getlog_env_app($envvars, "NMBD");
 151         $ret .= $self->getlog_env_app($envvars, "WINBINDD");
 152
 153         return $ret;
 154 }
 155
 156 sub check_env($$)
 157 {
 158         my ($self, $envvars) = @_;
 159
 160         my $childpid = waitpid(-1, WNOHANG);
 161
 162         # TODO ...
 163         return 1;
 164 }
 165
 166 sub setup_env($$$)
 167 {
 168         my ($self, $envname, $path) = @_;
 169
 170         $ENV{ENVNAME} = $envname;
 171
 172         if (defined($self->{vars}->{$envname})) {
 173                 return $self->{vars}->{$envname};
 174         }
 175
 176         if ($envname eq "nt4_dc") {
 177                 return $self->setup_nt4_dc("$path/nt4_dc");
 178         } elsif ($envname eq "nt4_dc_schannel") {
 179                 return $self->setup_nt4_dc_schannel("$path/nt4_dc_schannel");
 180         } elsif ($envname eq "simpleserver") {
 181                 return $self->setup_simpleserver("$path/simpleserver");
 182         } elsif ($envname eq "maptoguest") {
 183                 return $self->setup_maptoguest("$path/maptoguest");
 184         } elsif ($envname eq "ktest") {
 185                 return $self->setup_ktest("$path/ktest");
 186         } elsif ($envname eq "nt4_member") {
 187                 if (not defined($self->{vars}->{nt4_dc})) {
 188                         if (not defined($self->setup_nt4_dc("$path/nt4_dc"))) {
 189                                 return undef;
 190                         }
 191                 }
 192                 return $self->setup_nt4_member("$path/nt4_member", $self->{vars}->{nt4_dc});
 193         } else {
 194                 return "UNKNOWN";
 195         }
 196 }
 197
 198 sub setup_nt4_dc($$)
 199 {
 200         my ($self, $path) = @_;
 201
 202         print "PROVISIONING NT4 DC...";
 203
 204         my $nt4_dc_options = "
 205         domain master = yes
 206         domain logons = yes
 207         lanman auth = yes
 208
 209         rpc_server:epmapper = external
 210         rpc_server:spoolss = external
 211         rpc_server:lsarpc = external
 212         rpc_server:samr = external
 213         rpc_server:netlogon = external
 214         rpc_server:register_embedded_np = yes
 215         rpc_server:FssagentRpc = external
 216
 217         rpc_daemon:epmd = fork
 218         rpc_daemon:spoolssd = fork
 219         rpc_daemon:lsasd = fork
 220         rpc_daemon:fssd = fork
 221         fss: sequence timeout = 1
 222 ";
 223
 224         my $vars = $self->provision($path,
 225                                     "LOCALNT4DC2",
 226                                     "localntdc2pass",
 227                                     $nt4_dc_options);
 228
 229         $vars or return undef;
 230
 231         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 232                return undef;
 233         }
 234
 235         $vars->{DC_SERVER} = $vars->{SERVER};
 236         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 237         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 238         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 239         $vars->{DC_USERNAME} = $vars->{USERNAME};
 240         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 241
 242         $self->{vars}->{nt4_dc} = $vars;
 243
 244         return $vars;
 245 }
 246
 247 sub setup_nt4_dc_schannel($$)
 248 {
 249         my ($self, $path) = @_;
 250
 251         print "PROVISIONING NT4 DC WITH SERVER SCHANNEL ...";
 252
 253         my $pdc_options = "
 254         domain master = yes
 255         domain logons = yes
 256         lanman auth = yes
 257
 258         rpc_server:epmapper = external
 259         rpc_server:spoolss = external
 260         rpc_server:lsarpc = external
 261         rpc_server:samr = external
 262         rpc_server:netlogon = external
 263         rpc_server:register_embedded_np = yes
 264
 265         rpc_daemon:epmd = fork
 266         rpc_daemon:spoolssd = fork
 267         rpc_daemon:lsasd = fork
 268
 269         server schannel = yes
 270 ";
 271
 272         my $vars = $self->provision($path,
 273                                     "LOCALNT4DC9",
 274                                     "localntdc9pass",
 275                                     $pdc_options);
 276
 277         $vars or return undef;
 278
 279         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 280                return undef;
 281         }
 282
 283         $vars->{DC_SERVER} = $vars->{SERVER};
 284         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 285         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 286         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 287         $vars->{DC_USERNAME} = $vars->{USERNAME};
 288         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 289
 290         $self->{vars}->{nt4_dc_schannel} = $vars;
 291
 292         return $vars;
 293 }
 294
 295 sub setup_nt4_member($$$)
 296 {
 297         my ($self, $prefix, $nt4_dc_vars) = @_;
 298         my $count = 0;
 299         my $rc;
 300
 301         print "PROVISIONING MEMBER...";
 302
 303         my $member_options = "
 304         security = domain
 305         server signing = on
 306         dbwrap_tdb_mutexes:* = yes
 307 ";
 308         my $ret = $self->provision($prefix,
 309                                    "LOCALNT4MEMBER3",
 310                                    "localnt4member3pass",
 311                                    $member_options);
 312
 313         $ret or return undef;
 314
 315         my $nmblookup = Samba::bindir_path($self, "nmblookup");
 316         do {
 317                 print "Waiting for the LOGON SERVER registration ...\n";
 318                 $rc = system("$nmblookup $ret->{CONFIGURATION} $ret->{DOMAIN}\#1c");
 319                 if ($rc != 0) {
 320                         sleep(1);
 321                 }
 322                 $count++;
 323         } while ($rc != 0 && $count < 10);
 324         if ($count == 10) {
 325                 print "NMBD not reachable after 10 retries\n";
 326                 teardown_env($self, $ret);
 327                 return 0;
 328         }
 329
 330         my $net = Samba::bindir_path($self, "net");
 331         my $cmd = "";
 332         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 333         $cmd .= "$net join $ret->{CONFIGURATION} $nt4_dc_vars->{DOMAIN} member";
 334         $cmd .= " -U$nt4_dc_vars->{USERNAME}\%$nt4_dc_vars->{PASSWORD}";
 335
 336         if (system($cmd) != 0) {
 337             warn("Join failed\n$cmd");
 338             return undef;
 339         }
 340
 341         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 342                return undef;
 343         }
 344
 345         $ret->{DC_SERVER} = $nt4_dc_vars->{SERVER};
 346         $ret->{DC_SERVER_IP} = $nt4_dc_vars->{SERVER_IP};
 347         $ret->{DC_SERVER_IPV6} = $nt4_dc_vars->{SERVER_IPV6};
 348         $ret->{DC_NETBIOSNAME} = $nt4_dc_vars->{NETBIOSNAME};
 349         $ret->{DC_USERNAME} = $nt4_dc_vars->{USERNAME};
 350         $ret->{DC_PASSWORD} = $nt4_dc_vars->{PASSWORD};
 351
 352         return $ret;
 353 }
 354
 355 sub setup_admember($$$$)
 356 {
 357         my ($self, $prefix, $dcvars) = @_;
 358
 359         # If we didn't build with ADS, pretend this env was never available
 360         if (not $self->have_ads()) {
 361                 return "UNKNOWN";
 362         }
 363
 364         print "PROVISIONING S3 AD MEMBER...";
 365
 366         my $member_options = "
 367         security = ads
 368         server signing = on
 369         workgroup = $dcvars->{DOMAIN}
 370         realm = $dcvars->{REALM}
 371 ";
 372
 373         my $ret = $self->provision($prefix,
 374                                    "LOCALADMEMBER",
 375                                    "loCalMemberPass",
 376                                    $member_options,
 377                                    $dcvars->{SERVER_IP},
 378                                    $dcvars->{SERVER_IPV6});
 379
 380         $ret or return undef;
 381
 382         close(USERMAP);
 383         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 384         $ret->{REALM} = $dcvars->{REALM};
 385
 386         my $ctx;
 387         my $prefix_abs = abs_path($prefix);
 388         $ctx = {};
 389         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 390         $ctx->{domain} = $dcvars->{DOMAIN};
 391         $ctx->{realm} = $dcvars->{REALM};
 392         $ctx->{dnsname} = lc($dcvars->{REALM});
 393         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 394         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 395         Samba::mk_krb5_conf($ctx, "");
 396
 397         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 398
 399         my $net = Samba::bindir_path($self, "net");
 400         my $cmd = "";
 401         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 402         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 403                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 404         } else {
 405                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 406         }
 407         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 408         $cmd .= "$net join $ret->{CONFIGURATION}";
 409         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 410
 411         if (system($cmd) != 0) {
 412             warn("Join failed\n$cmd");
 413             return undef;
 414         }
 415
 416         # We need world access to this share, as otherwise the domain
 417         # administrator from the AD domain provided by Samba4 can't
 418         # access the share for tests.
 419         chmod 0777, "$prefix/share";
 420
 421         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 422                 return undef;
 423         }
 424
 425         $ret->{DC_SERVER} = $dcvars->{SERVER};
 426         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 427         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 428         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 429         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 430         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 431
 432         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 433         $ret->{target} = $self;
 434
 435         return $ret;
 436 }
 437
 438 sub setup_admember_rfc2307($$$$)
 439 {
 440         my ($self, $prefix, $dcvars) = @_;
 441
 442         # If we didn't build with ADS, pretend this env was never available
 443         if (not $self->have_ads()) {
 444                 return "UNKNOWN";
 445         }
 446
 447         print "PROVISIONING S3 AD MEMBER WITH idmap_rfc2307 config...";
 448
 449         my $member_options = "
 450         security = ads
 451         server signing = on
 452         workgroup = $dcvars->{DOMAIN}
 453         realm = $dcvars->{REALM}
 454         idmap config $dcvars->{DOMAIN} : backend = rfc2307
 455         idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
 456         idmap config $dcvars->{DOMAIN} : ldap_server = ad
 457         idmap config $dcvars->{DOMAIN} : bind_path_user = ou=idmap,dc=samba,dc=example,dc=com
 458         idmap config $dcvars->{DOMAIN} : bind_path_group = ou=idmap,dc=samba,dc=example,dc=com
 459 ";
 460
 461         my $ret = $self->provision($prefix,
 462                                    "RFC2307MEMBER",
 463                                    "loCalMemberPass",
 464                                    $member_options,
 465                                    $dcvars->{SERVER_IP},
 466                                    $dcvars->{SERVER_IPV6});
 467
 468         $ret or return undef;
 469
 470         close(USERMAP);
 471         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 472         $ret->{REALM} = $dcvars->{REALM};
 473
 474         my $ctx;
 475         my $prefix_abs = abs_path($prefix);
 476         $ctx = {};
 477         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 478         $ctx->{domain} = $dcvars->{DOMAIN};
 479         $ctx->{realm} = $dcvars->{REALM};
 480         $ctx->{dnsname} = lc($dcvars->{REALM});
 481         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 482         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 483         Samba::mk_krb5_conf($ctx, "");
 484
 485         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 486
 487         my $net = Samba::bindir_path($self, "net");
 488         my $cmd = "";
 489         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 490         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 491                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 492         } else {
 493                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 494         }
 495         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 496         $cmd .= "$net join $ret->{CONFIGURATION}";
 497         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 498
 499         if (system($cmd) != 0) {
 500             warn("Join failed\n$cmd");
 501             return undef;
 502         }
 503
 504         # We need world access to this share, as otherwise the domain
 505         # administrator from the AD domain provided by Samba4 can't
 506         # access the share for tests.
 507         chmod 0777, "$prefix/share";
 508
 509         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 510                 return undef;
 511         }
 512
 513         $ret->{DC_SERVER} = $dcvars->{SERVER};
 514         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 515         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 516         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 517         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 518         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 519
 520         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 521         $ret->{target} = $self;
 522
 523         return $ret;
 524 }
 525
 526 sub setup_simpleserver($$)
 527 {
 528         my ($self, $path) = @_;
 529
 530         print "PROVISIONING server with security=share...";
 531
 532         my $prefix_abs = abs_path($path);
 533
 534         my $simpleserver_options = "
 535         lanman auth = yes
 536         vfs objects = xattr_tdb streams_depot
 537
 538 [vfs_aio_fork]
 539         path = $prefix_abs/share
 540         vfs objects = aio_fork
 541         read only = no
 542         vfs_aio_fork:erratic_testing_mode=yes
 543 ";
 544
 545         my $vars = $self->provision($path,
 546                                     "LOCALSHARE4",
 547                                     "local4pass",
 548                                     $simpleserver_options);
 549
 550         $vars or return undef;
 551
 552         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 553                return undef;
 554         }
 555
 556         $self->{vars}->{simpleserver} = $vars;
 557
 558         return $vars;
 559 }
 560
 561 sub setup_ktest($$$)
 562 {
 563         my ($self, $prefix) = @_;
 564
 565         # If we didn't build with ADS, pretend this env was never available
 566         if (not $self->have_ads()) {
 567                 return "UNKNOWN";
 568         }
 569
 570         print "PROVISIONING server with security=ads...";
 571
 572         my $ktest_options = "
 573         workgroup = KTEST
 574         realm = ktest.samba.example.com
 575         security = ads
 576         username map = $prefix/lib/username.map
 577         server signing = required
 578 ";
 579
 580         my $ret = $self->provision($prefix,
 581                                    "LOCALKTEST6",
 582                                    "localktest6pass",
 583                                    $ktest_options);
 584
 585         $ret or return undef;
 586
 587         my $ctx;
 588         my $prefix_abs = abs_path($prefix);
 589         $ctx = {};
 590         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 591         $ctx->{domain} = "KTEST";
 592         $ctx->{realm} = "KTEST.SAMBA.EXAMPLE.COM";
 593         $ctx->{dnsname} = lc($ctx->{realm});
 594         $ctx->{kdc_ipv4} = "0.0.0.0";
 595         $ctx->{kdc_ipv6} = "::";
 596         Samba::mk_krb5_conf($ctx, "");
 597
 598         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 599
 600         open(USERMAP, ">$prefix/lib/username.map") or die("Unable to open $prefix/lib/username.map");
 601         print USERMAP "
 602 $ret->{USERNAME} = KTEST\\Administrator
 603 ";
 604         close(USERMAP);
 605
 606 #This is the secrets.tdb created by 'net ads join' from Samba3 to a
 607 #Samba4 DC with the same parameters as are being used here.  The
 608 #domain SID is S-1-5-21-1071277805-689288055-3486227160
 609
 610         system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb $prefix/private/secrets.tdb");
 611         chmod 0600, "$prefix/private/secrets.tdb";
 612
 613 #Make sure there's no old ntdb file.
 614         system("rm -f $prefix/private/secrets.ntdb");
 615
 616 #This uses a pre-calculated krb5 credentials cache, obtained by running Samba4 with:
 617 # "--option=kdc:service ticket lifetime=239232" "--option=kdc:user ticket lifetime=239232" "--option=kdc:renewal lifetime=239232"
 618 #
 619 #and having in krb5.conf:
 620 # ticket_lifetime = 799718400
 621 # renew_lifetime = 799718400
 622 #
 623 # The commands for the -2 keytab where were:
 624 # kinit administrator@KTEST.SAMBA.EXAMPLE.COM
 625 # kvno host/localktest6@KTEST.SAMBA.EXAMPLE.COM
 626 # kvno cifs/localktest6@KTEST.SAMBA.EXAMPLE.COM
 627 # kvno host/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 628 # kvno cifs/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 629 #
 630 # and then for the -3 keytab, I did
 631 #
 632 # net changetrustpw; kdestroy and the same again.
 633 #
 634 # This creates a credential cache with a very long lifetime (2036 at
 635 # at 2011-04), and shows that running 'net changetrustpw' does not
 636 # break existing logins (for the secrets.tdb method at least).
 637 #
 638
 639         $ret->{KRB5_CCACHE}="FILE:$prefix/krb5_ccache";
 640
 641         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-2 $prefix/krb5_ccache-2");
 642         chmod 0600, "$prefix/krb5_ccache-2";
 643
 644         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-3 $prefix/krb5_ccache-3");
 645         chmod 0600, "$prefix/krb5_ccache-3";
 646
 647         # We need world access to this share, as otherwise the domain
 648         # administrator from the AD domain provided by ktest can't
 649         # access the share for tests.
 650         chmod 0777, "$prefix/share";
 651
 652         if (not $self->check_or_start($ret, "yes", "no", "yes")) {
 653                return undef;
 654         }
 655         return $ret;
 656 }
 657
 658 sub setup_maptoguest($$)
 659 {
 660         my ($self, $path) = @_;
 661
 662         print "PROVISIONING maptoguest...";
 663
 664         my $options = "
 665 map to guest = bad user
 666 ";
 667
 668         my $vars = $self->provision($path,
 669                                     "maptoguest",
 670                                     "maptoguestpass",
 671                                     $options);
 672
 673         $vars or return undef;
 674
 675         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 676                return undef;
 677         }
 678
 679         $self->{vars}->{s3maptoguest} = $vars;
 680
 681         return $vars;
 682 }
 683
 684 sub stop_sig_term($$) {
 685         my ($self, $pid) = @_;
 686         kill("USR1", $pid) or kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 687 }
 688
 689 sub stop_sig_kill($$) {
 690         my ($self, $pid) = @_;
 691         kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 692 }
 693
 694 sub write_pid($$$)
 695 {
 696         my ($env_vars, $app, $pid) = @_;
 697
 698         open(PID, ">$env_vars->{PIDDIR}/timelimit.$app.pid");
 699         print PID $pid;
 700         close(PID);
 701 }
 702
 703 sub read_pid($$)
 704 {
 705         my ($env_vars, $app) = @_;
 706
 707         open(PID, "<$env_vars->{PIDDIR}/timelimit.$app.pid");
 708         my $pid = <PID>;
 709         close(PID);
 710         return $pid;
 711 }
 712
 713 sub check_or_start($$$$$) {
 714         my ($self, $env_vars, $nmbd, $winbindd, $smbd) = @_;
 715
 716         # use a pipe for stdin in the child processes. This allows
 717         # those processes to monitor the pipe for EOF to ensure they
 718         # exit when the test script exits
 719         pipe(STDIN_READER, $env_vars->{STDIN_PIPE});
 720
 721         unlink($env_vars->{NMBD_TEST_LOG});
 722         print "STARTING NMBD...";
 723         my $pid = fork();
 724         if ($pid == 0) {
 725                 open STDOUT, ">$env_vars->{NMBD_TEST_LOG}";
 726                 open STDERR, '>&STDOUT';
 727
 728                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 729
 730                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 731                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 732                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 733
 734                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 735                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 736                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 737                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 738                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 739                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 740
 741                 $ENV{ENVNAME} = "$ENV{ENVNAME}.nmbd";
 742
 743                 if ($nmbd ne "yes") {
 744                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 745                                 my $signame = shift;
 746                                 print("Skip nmbd received signal $signame");
 747                                 exit 0;
 748                         };
 749                         sleep($self->{server_maxtime});
 750                         exit 0;
 751                 }
 752
 753                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
 754                 my @optargs = ("-d0");
 755                 if (defined($ENV{NMBD_OPTIONS})) {
 756                         @optargs = split(/ /, $ENV{NMBD_OPTIONS});
 757                 }
 758                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 759                 if(defined($ENV{NMBD_VALGRIND})) {
 760                         @preargs = split(/ /, $ENV{NMBD_VALGRIND});
 761                 }
 762                 my @args = ("-F", "--no-process-group",
 763                             "-s", $env_vars->{SERVERCONFFILE},
 764                             "-l", $env_vars->{LOGDIR});
 765                 if (not defined($ENV{NMBD_DONT_LOG_STDOUT})) {
 766                         push(@args, "--log-stdout");
 767                 }
 768
 769                 close($env_vars->{STDIN_PIPE});
 770                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 771
 772                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
 773                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
 774         }
 775         $env_vars->{NMBD_TL_PID} = $pid;
 776         write_pid($env_vars, "nmbd", $pid);
 777         print "DONE\n";
 778
 779         unlink($env_vars->{WINBINDD_TEST_LOG});
 780         print "STARTING WINBINDD...";
 781         $pid = fork();
 782         if ($pid == 0) {
 783                 open STDOUT, ">$env_vars->{WINBINDD_TEST_LOG}";
 784                 open STDERR, '>&STDOUT';
 785
 786                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 787
 788                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 789                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 790                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 791
 792                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 793                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 794                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 795                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 796                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 797                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 798                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
 799                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
 800                 } else {
 801                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
 802                 }
 803
 804                 $ENV{ENVNAME} = "$ENV{ENVNAME}.winbindd";
 805
 806                 if ($winbindd ne "yes") {
 807                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 808                                 my $signame = shift;
 809                                 print("Skip winbindd received signal $signame");
 810                                 exit 0;
 811                         };
 812                         sleep($self->{server_maxtime});
 813                         exit 0;
 814                 }
 815
 816                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
 817                 my @optargs = ("-d0");
 818                 if (defined($ENV{WINBINDD_OPTIONS})) {
 819                         @optargs = split(/ /, $ENV{WINBINDD_OPTIONS});
 820                 }
 821                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 822                 if(defined($ENV{WINBINDD_VALGRIND})) {
 823                         @preargs = split(/ /, $ENV{WINBINDD_VALGRIND});
 824                 }
 825                 my @args = ("-F", "--no-process-group",
 826                             "-s", $env_vars->{SERVERCONFFILE},
 827                             "-l", $env_vars->{LOGDIR});
 828                 if (not defined($ENV{WINBINDD_DONT_LOG_STDOUT})) {
 829                         push(@args, "--stdout");
 830                 }
 831
 832                 close($env_vars->{STDIN_PIPE});
 833                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 834
 835                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
 836                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
 837         }
 838         $env_vars->{WINBINDD_TL_PID} = $pid;
 839         write_pid($env_vars, "winbindd", $pid);
 840         print "DONE\n";
 841
 842         unlink($env_vars->{SMBD_TEST_LOG});
 843         print "STARTING SMBD...";
 844         $pid = fork();
 845         if ($pid == 0) {
 846                 open STDOUT, ">$env_vars->{SMBD_TEST_LOG}";
 847                 open STDERR, '>&STDOUT';
 848
 849                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 850
 851                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 852                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 853                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 854
 855                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 856                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 857                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 858                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 859                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 860                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 861                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
 862                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
 863                 } else {
 864                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
 865                 }
 866
 867                 $ENV{ENVNAME} = "$ENV{ENVNAME}.smbd";
 868
 869                 if ($smbd ne "yes") {
 870                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 871                                 my $signame = shift;
 872                                 print("Skip smbd received signal $signame");
 873                                 exit 0;
 874                         };
 875                         sleep($self->{server_maxtime});
 876                         exit 0;
 877                 }
 878
 879                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "smbd");
 880                 my @optargs = ("-d0");
 881                 if (defined($ENV{SMBD_OPTIONS})) {
 882                         @optargs = split(/ /, $ENV{SMBD_OPTIONS});
 883                 }
 884                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 885                 if(defined($ENV{SMBD_VALGRIND})) {
 886                         @preargs = split(/ /,$ENV{SMBD_VALGRIND});
 887                 }
 888                 my @args = ("-F", "--no-process-group",
 889                             "-s", $env_vars->{SERVERCONFFILE},
 890                             "-l", $env_vars->{LOGDIR});
 891                 if (not defined($ENV{SMBD_DONT_LOG_STDOUT})) {
 892                         push(@args, "--log-stdout");
 893                 }
 894
 895                 close($env_vars->{STDIN_PIPE});
 896                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 897
 898                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
 899                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
 900         }
 901         $env_vars->{SMBD_TL_PID} = $pid;
 902         write_pid($env_vars, "smbd", $pid);
 903         print "DONE\n";
 904
 905         close(STDIN_READER);
 906
 907         return $self->wait_for_start($env_vars, $nmbd, $winbindd, $smbd);
 908 }
 909
 910 sub provision($$$$$$$$)
 911 {
 912         my ($self, $prefix, $server, $password, $extra_options, $dc_server_ip, $dc_server_ipv6, $no_delete_prefix) = @_;
 913
 914         ##
 915         ## setup the various environment variables we need
 916         ##
 917
 918         my $swiface = Samba::get_interface($server);
 919         my %ret = ();
 920         my $server_ip = "127.0.0.$swiface";
 921         my $server_ipv6 = sprintf("fd00:0000:0000:0000:0000:0000:5357:5f%02x", $swiface);
 922         my $domain = "SAMBA-TEST";
 923
 924         my $unix_name = ($ENV{USER} or $ENV{LOGNAME} or `PATH=/usr/ucb:$ENV{PATH} whoami`);
 925         chomp $unix_name;
 926         my $unix_uid = $>;
 927         my $unix_gids_str = $);
 928         my @unix_gids = split(" ", $unix_gids_str);
 929
 930         my $prefix_abs = abs_path($prefix);
 931         my $bindir_abs = abs_path($self->{bindir});
 932
 933         my @dirs = ();
 934
 935         my $shrdir="$prefix_abs/share";
 936         push(@dirs,$shrdir);
 937
 938         my $libdir="$prefix_abs/lib";
 939         push(@dirs,$libdir);
 940
 941         my $piddir="$prefix_abs/pid";
 942         push(@dirs,$piddir);
 943
 944         my $privatedir="$prefix_abs/private";
 945         push(@dirs,$privatedir);
 946
 947         my $lockdir="$prefix_abs/lockdir";
 948         push(@dirs,$lockdir);
 949
 950         my $eventlogdir="$prefix_abs/lockdir/eventlog";
 951         push(@dirs,$eventlogdir);
 952
 953         my $logdir="$prefix_abs/logs";
 954         push(@dirs,$logdir);
 955
 956         my $driver32dir="$shrdir/W32X86";
 957         push(@dirs,$driver32dir);
 958
 959         my $driver64dir="$shrdir/x64";
 960         push(@dirs,$driver64dir);
 961
 962         my $driver40dir="$shrdir/WIN40";
 963         push(@dirs,$driver40dir);
 964
 965         my $ro_shrdir="$shrdir/root-tmp";
 966         push(@dirs,$ro_shrdir);
 967
 968         my $msdfs_shrdir="$shrdir/msdfsshare";
 969         push(@dirs,$msdfs_shrdir);
 970
 971         my $msdfs_deeppath="$msdfs_shrdir/deeppath";
 972         push(@dirs,$msdfs_deeppath);
 973
 974         my $badnames_shrdir="$shrdir/badnames";
 975         push(@dirs,$badnames_shrdir);
 976
 977         my $lease1_shrdir="$shrdir/SMB2_10";
 978         push(@dirs,$lease1_shrdir);
 979
 980         my $lease2_shrdir="$shrdir/SMB3_00";
 981         push(@dirs,$lease2_shrdir);
 982
 983         my $manglenames_shrdir="$shrdir/manglenames";
 984         push(@dirs,$manglenames_shrdir);
 985
 986         # this gets autocreated by winbindd
 987         my $wbsockdir="$prefix_abs/winbindd";
 988         my $wbsockprivdir="$lockdir/winbindd_privileged";
 989
 990         my $nmbdsockdir="$prefix_abs/nmbd";
 991         unlink($nmbdsockdir);
 992
 993         ##
 994         ## create the test directory layout
 995         ##
 996         die ("prefix_abs = ''") if $prefix_abs eq "";
 997         die ("prefix_abs = '/'") if $prefix_abs eq "/";
 998
 999         mkdir($prefix_abs, 0777);
1000         print "CREATE TEST ENVIRONMENT IN '$prefix'...";
1001         if (not defined($no_delete_prefix) or not $no_delete_prefix) {
1002             system("rm -rf $prefix_abs/*");
1003         }
1004         mkdir($_, 0777) foreach(@dirs);
1005
1006         my $fs_specific_conf = $self->get_fs_specific_conf($shrdir);
1007
1008         ##
1009         ## lockdir and piddir must be 0755
1010         ##
1011         chmod 0755, $lockdir;
1012         chmod 0755, $piddir;
1013
1014
1015         ##
1016         ## create ro and msdfs share layout
1017         ##
1018
1019         chmod 0755, $ro_shrdir;
1020         my $unreadable_file = "$ro_shrdir/unreadable_file";
1021         unless (open(UNREADABLE_FILE, ">$unreadable_file")) {
1022                 warn("Unable to open $unreadable_file");
1023                 return undef;
1024         }
1025         close(UNREADABLE_FILE);
1026         chmod 0600, $unreadable_file;
1027
1028         my $msdfs_target = "$ro_shrdir/msdfs-target";
1029         unless (open(MSDFS_TARGET, ">$msdfs_target")) {
1030                 warn("Unable to open $msdfs_target");
1031                 return undef;
1032         }
1033         close(MSDFS_TARGET);
1034         chmod 0666, $msdfs_target;
1035         symlink "msdfs:$server_ip\\ro-tmp,$server_ipv6\\ro-tmp",
1036                 "$msdfs_shrdir/msdfs-src1";
1037         symlink "msdfs:$server_ipv6\\ro-tmp", "$msdfs_shrdir/deeppath/msdfs-src2";
1038
1039         ##
1040         ## create bad names in $badnames_shrdir
1041         ##
1042         ## (An invalid name, would be mangled to 8.3).
1043         my $badname_target = "$badnames_shrdir/\340|\231\216\377\177";
1044         unless (open(BADNAME_TARGET, ">$badname_target")) {
1045                 warn("Unable to open $badname_target");
1046                 return undef;
1047         }
1048         close(BADNAME_TARGET);
1049         chmod 0666, $badname_target;
1050
1051         ## (A bad name, would not be mangled to 8.3).
1052         my $badname_target = "$badnames_shrdir/\240\276\346\327\377\177";
1053         unless (open(BADNAME_TARGET, ">$badname_target")) {
1054                 warn("Unable to open $badname_target");
1055                 return undef;
1056         }
1057         close(BADNAME_TARGET);
1058         chmod 0666, $badname_target;
1059
1060         ## (A bad good name).
1061         my $badname_target = "$badnames_shrdir/blank.txt";
1062         unless (open(BADNAME_TARGET, ">$badname_target")) {
1063                 warn("Unable to open $badname_target");
1064                 return undef;
1065         }
1066         close(BADNAME_TARGET);
1067         chmod 0666, $badname_target;
1068
1069         ##
1070         ## create mangleable directory names in $manglenames_shrdir
1071         ##
1072         my $manglename_target = "$manglenames_shrdir/foo:bar";
1073         mkdir($manglename_target, 0777);
1074
1075         my $conffile="$libdir/server.conf";
1076
1077         my $nss_wrapper_pl = "$ENV{PERL} $self->{srcdir}/lib/nss_wrapper/nss_wrapper.pl";
1078         my $nss_wrapper_passwd = "$privatedir/passwd";
1079         my $nss_wrapper_group = "$privatedir/group";
1080         my $nss_wrapper_hosts = "$ENV{SELFTEST_PREFIX}/hosts";
1081         my $resolv_conf = "$privatedir/resolv.conf";
1082         my $dns_host_file = "$ENV{SELFTEST_PREFIX}/dns_host_file";
1083
1084         my $mod_printer_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/printing/modprinter.pl";
1085
1086         my $fake_snap_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/fake_snap.pl";
1087
1088         my @eventlog_list = ("dns server", "application");
1089
1090         ##
1091         ## calculate uids and gids
1092         ##
1093
1094         my ($max_uid, $max_gid);
1095         my ($uid_nobody, $uid_root, $uid_pdbtest, $uid_pdbtest2);
1096         my ($gid_nobody, $gid_nogroup, $gid_root, $gid_domusers, $gid_domadmins);
1097
1098         if ($unix_uid < 0xffff - 4) {
1099                 $max_uid = 0xffff;
1100         } else {
1101                 $max_uid = $unix_uid;
1102         }
1103
1104         $uid_root = $max_uid - 1;
1105         $uid_nobody = $max_uid - 2;
1106         $uid_pdbtest = $max_uid - 3;
1107         $uid_pdbtest2 = $max_uid - 4;
1108
1109         if ($unix_gids[0] < 0xffff - 5) {
1110                 $max_gid = 0xffff;
1111         } else {
1112                 $max_gid = $unix_gids[0];
1113         }
1114
1115         $gid_nobody = $max_gid - 1;
1116         $gid_nogroup = $max_gid - 2;
1117         $gid_root = $max_gid - 3;
1118         $gid_domusers = $max_gid - 4;
1119         $gid_domadmins = $max_gid - 5;
1120
1121         ##
1122         ## create conffile
1123         ##
1124
1125         unless (open(CONF, ">$conffile")) {
1126                 warn("Unable to open $conffile");
1127                 return undef;
1128         }
1129         print CONF "
1130 [global]
1131         netbios name = $server
1132         interfaces = $server_ip/8 $server_ipv6/64
1133         bind interfaces only = yes
1134         panic action = cd $self->{srcdir} && $self->{srcdir}/selftest/gdb_backtrace %d %\$(MAKE_TEST_BINARY)
1135         smbd:suicide mode = yes
1136
1137         workgroup = $domain
1138
1139         private dir = $privatedir
1140         pid directory = $piddir
1141         lock directory = $lockdir
1142         log file = $logdir/log.\%m
1143         log level = 1
1144         debug pid = yes
1145         max log size = 0
1146
1147         state directory = $lockdir
1148         cache directory = $lockdir
1149
1150         passdb backend = tdbsam
1151
1152         time server = yes
1153
1154         add user script =               $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1155         add group script =              $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action add --name %g
1156         add machine script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1157         add user to group script =      $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action add --member %u --name %g --group_path $nss_wrapper_group
1158         delete user script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action delete --name %u
1159         delete group script =           $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action delete --name %g
1160         delete user from group script = $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action delete --member %u --name %g --group_path $nss_wrapper_group
1161
1162         addprinter command =            $mod_printer_pl -a -s $conffile --
1163         deleteprinter command =         $mod_printer_pl -d -s $conffile --
1164
1165         eventlog list = application \"dns server\"
1166
1167         kernel oplocks = no
1168         kernel change notify = no
1169         smb2 leases = yes
1170
1171         logging = file
1172         printing = bsd
1173         printcap name = /dev/null
1174
1175         winbindd socket directory = $wbsockdir
1176         nmbd:socket dir = $nmbdsockdir
1177         idmap config * : range = 100000-200000
1178         winbind enum users = yes
1179         winbind enum groups = yes
1180         winbind separator = /
1181
1182 #       min receivefile size = 4000
1183
1184         read only = no
1185         server signing = auto
1186
1187         smbd:sharedelay = 100000
1188         smbd:writetimeupdatedelay = 500000
1189         map hidden = no
1190         map system = no
1191         map readonly = no
1192         store dos attributes = yes
1193         create mask = 755
1194         dos filemode = yes
1195         strict rename = yes
1196         vfs objects = acl_xattr fake_acls xattr_tdb streams_depot
1197
1198         printing = vlp
1199         print command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb print %p %s
1200         lpq command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpq %p
1201         lp rm command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lprm %p %j
1202         lp pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lppause %p %j
1203         lp resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpresume %p %j
1204         queue pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queuepause %p
1205         queue resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queueresume %p
1206         lpq cache time = 0
1207         print notify backchannel = yes
1208
1209         ncalrpc dir = $prefix_abs/ncalrpc
1210
1211         # The samba3.blackbox.smbclient_s3 test uses this to test that
1212         # sending messages works, and that the %m sub works.
1213         message command = mv %s $shrdir/message.%m
1214
1215         # fsrvp server requires registry shares
1216         registry shares = yes
1217
1218         # Begin extra options
1219         $extra_options
1220         # End extra options
1221
1222         #Include user defined custom parameters if set
1223 ";
1224
1225         if (defined($ENV{INCLUDE_CUSTOM_CONF})) {
1226                 print CONF "\t$ENV{INCLUDE_CUSTOM_CONF}\n";
1227         }
1228
1229         print CONF "
1230 [tmp]
1231         path = $shrdir
1232         comment = smb username is [%U]
1233 [tmpsort]
1234         path = $shrdir
1235         comment = Load dirsort module
1236         vfs objects = dirsort acl_xattr fake_acls xattr_tdb streams_depot
1237 [tmpenc]
1238         path = $shrdir
1239         comment = encrypt smb username is [%U]
1240         smb encrypt = required
1241         vfs objects = dirsort
1242 [tmpguest]
1243         path = $shrdir
1244         guest ok = yes
1245 [guestonly]
1246         path = $shrdir
1247         guest only = yes
1248         guest ok = yes
1249 [forceuser]
1250         path = $shrdir
1251         force user = $unix_name
1252         guest ok = yes
1253 [forceuser_unixonly]
1254         path = $shrdir
1255         force user = pdbtest
1256         guest ok = yes
1257 [forcegroup]
1258         path = $shrdir
1259         force group = nogroup
1260         guest ok = yes
1261 [ro-tmp]
1262         path = $ro_shrdir
1263         guest ok = yes
1264 [write-list-tmp]
1265         path = $shrdir
1266         read only = yes
1267         write list = $unix_name
1268 [valid-users-tmp]
1269         path = $shrdir
1270         valid users = $unix_name
1271 [msdfs-share]
1272         path = $msdfs_shrdir
1273         msdfs root = yes
1274         msdfs shuffle referrals = yes
1275         guest ok = yes
1276 [hideunread]
1277         copy = tmp
1278         hide unreadable = yes
1279 [tmpcase]
1280         copy = tmp
1281         case sensitive = yes
1282 [hideunwrite]
1283         copy = tmp
1284         hide unwriteable files = yes
1285 [durable]
1286         copy = tmp
1287         kernel share modes = no
1288         kernel oplocks = no
1289         posix locking = no
1290 [fs_specific]
1291         copy = tmp
1292         $fs_specific_conf
1293 [print1]
1294         copy = tmp
1295         printable = yes
1296
1297 [print2]
1298         copy = print1
1299 [print3]
1300         copy = print1
1301         default devmode = no
1302 [lp]
1303         copy = print1
1304
1305 [nfs4acl_simple]
1306         path = $shrdir
1307         comment = smb username is [%U]
1308         nfs4:mode = simple
1309         vfs objects = nfs4acl_xattr xattr_tdb
1310
1311 [nfs4acl_special]
1312         path = $shrdir
1313         comment = smb username is [%U]
1314         nfs4:mode = special
1315         vfs objects = nfs4acl_xattr xattr_tdb
1316
1317 [xcopy_share]
1318         path = $shrdir
1319         comment = smb username is [%U]
1320         create mask = 777
1321         force create mode = 777
1322 [posix_share]
1323         path = $shrdir
1324         comment = smb username is [%U]
1325         create mask = 0777
1326         force create mode = 0
1327         directory mask = 0777
1328         force directory mode = 0
1329         vfs objects = xattr_tdb
1330 [aio]
1331         copy = tmp
1332         aio read size = 1
1333         aio write size = 1
1334
1335 [print\$]
1336         copy = tmp
1337
1338 [vfs_fruit]
1339         path = $shrdir
1340         vfs objects = catia fruit streams_xattr
1341         fruit:ressource = file
1342         fruit:metadata = netatalk
1343         fruit:locking = netatalk
1344         fruit:encoding = native
1345
1346 [badname-tmp]
1347         path = $badnames_shrdir
1348         guest ok = yes
1349
1350 [manglenames_share]
1351         path = $manglenames_shrdir
1352         guest ok = yes
1353
1354 [dynamic_share]
1355         path = $shrdir/%R
1356         guest ok = yes
1357
1358 [fsrvp_share]
1359         path = $shrdir
1360         comment = fake shapshots using rsync
1361         vfs objects = shell_snap shadow_copy2
1362         shell_snap:check path command = $fake_snap_pl --check
1363         shell_snap:create command = $fake_snap_pl --create
1364         shell_snap:delete command = $fake_snap_pl --delete
1365         # a relative path here fails, the snapshot dir is no longer found
1366         shadow:snapdir = $shrdir/.snapshots
1367         ";
1368         close(CONF);
1369
1370         ##
1371         ## create a test account
1372         ##
1373
1374         unless (open(PASSWD, ">$nss_wrapper_passwd")) {
1375            warn("Unable to open $nss_wrapper_passwd");
1376            return undef;
1377         }
1378         print PASSWD "nobody:x:$uid_nobody:$gid_nobody:nobody gecos:$prefix_abs:/bin/false
1379 $unix_name:x:$unix_uid:$unix_gids[0]:$unix_name gecos:$prefix_abs:/bin/false
1380 pdbtest:x:$uid_pdbtest:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
1381 pdbtest2:x:$uid_pdbtest2:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
1382 ";
1383         if ($unix_uid != 0) {
1384                 print PASSWD "root:x:$uid_root:$gid_root:root gecos:$prefix_abs:/bin/false
1385 ";
1386         }
1387         close(PASSWD);
1388
1389         unless (open(GROUP, ">$nss_wrapper_group")) {
1390              warn("Unable to open $nss_wrapper_group");
1391              return undef;
1392         }
1393         print GROUP "nobody:x:$gid_nobody:
1394 nogroup:x:$gid_nogroup:nobody
1395 $unix_name-group:x:$unix_gids[0]:
1396 domusers:X:$gid_domusers:
1397 domadmins:X:$gid_domadmins:
1398 ";
1399         if ($unix_gids[0] != 0) {
1400                 print GROUP "root:x:$gid_root:
1401 ";
1402         }
1403
1404         close(GROUP);
1405
1406         ## hosts
1407         my $hostname = lc($server);
1408         unless (open(HOSTS, ">>$nss_wrapper_hosts")) {
1409                 warn("Unable to open $nss_wrapper_hosts");
1410                 return undef;
1411         }
1412         print HOSTS "${server_ip} ${hostname}.samba.example.com ${hostname}\n";
1413         print HOSTS "${server_ipv6} ${hostname}.samba.example.com ${hostname}\n";
1414         close(HOSTS);
1415
1416         ## hosts
1417         unless (open(RESOLV_CONF, ">$resolv_conf")) {
1418                 warn("Unable to open $resolv_conf");
1419                 return undef;
1420         }
1421         if (defined($dc_server_ip) or defined($dc_server_ipv6)) {
1422                 if (defined($dc_server_ip)) {
1423                         print RESOLV_CONF "nameserver $dc_server_ip\n";
1424                 }
1425                 if (defined($dc_server_ipv6)) {
1426                         print RESOLV_CONF "nameserver $dc_server_ipv6\n";
1427                 }
1428         } else {
1429                 print RESOLV_CONF "nameserver ${server_ip}\n";
1430                 print RESOLV_CONF "nameserver ${server_ipv6}\n";
1431         }
1432         close(RESOLV_CONF);
1433
1434         foreach my $evlog (@eventlog_list) {
1435                 my $evlogtdb = "$eventlogdir/$evlog.tdb";
1436                 open(EVENTLOG, ">$evlogtdb") or die("Unable to open $evlogtdb");
1437                 close(EVENTLOG);
1438         }
1439
1440         $ENV{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1441         $ENV{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1442         $ENV{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
1443         $ENV{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
1444         if ($ENV{SAMBA_DNS_FAKING}) {
1445                 $ENV{RESOLV_WRAPPER_CONF} = $resolv_conf;
1446         } else {
1447                 $ENV{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
1448         }
1449
1450         my $cmd = "UID_WRAPPER_ROOT=1 " . Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $unix_name > /dev/null";
1451         unless (open(PWD, "|$cmd")) {
1452              warn("Unable to set password for test account\n$cmd");
1453              return undef;
1454         }
1455         print PWD "$password\n$password\n";
1456         unless (close(PWD)) {
1457              warn("Unable to set password for test account\n$cmd");
1458              return undef;
1459         }
1460         print "DONE\n";
1461
1462         open(DNS_UPDATE_LIST, ">$prefix/dns_update_list") or die("Unable to open $$prefix/dns_update_list");
1463         print DNS_UPDATE_LIST "A $server. $server_ip\n";
1464         print DNS_UPDATE_LIST "AAAA $server. $server_ipv6\n";
1465         close(DNS_UPDATE_LIST);
1466
1467         $ret{SERVER_IP} = $server_ip;
1468         $ret{SERVER_IPV6} = $server_ipv6;
1469         $ret{NMBD_TEST_LOG} = "$prefix/nmbd_test.log";
1470         $ret{NMBD_TEST_LOG_POS} = 0;
1471         $ret{WINBINDD_TEST_LOG} = "$prefix/winbindd_test.log";
1472         $ret{WINBINDD_TEST_LOG_POS} = 0;
1473         $ret{SMBD_TEST_LOG} = "$prefix/smbd_test.log";
1474         $ret{SMBD_TEST_LOG_POS} = 0;
1475         $ret{SERVERCONFFILE} = $conffile;
1476         $ret{CONFIGURATION} ="-s $conffile";
1477         $ret{SERVER} = $server;
1478         $ret{USERNAME} = $unix_name;
1479         $ret{USERID} = $unix_uid;
1480         $ret{DOMAIN} = $domain;
1481         $ret{NETBIOSNAME} = $server;
1482         $ret{PASSWORD} = $password;
1483         $ret{PIDDIR} = $piddir;
1484         $ret{SELFTEST_WINBINDD_SOCKET_DIR} = $wbsockdir;
1485         $ret{WINBINDD_PRIV_PIPE_DIR} = $wbsockprivdir;
1486         $ret{NMBD_SOCKET_DIR} = $nmbdsockdir;
1487         $ret{SOCKET_WRAPPER_DEFAULT_IFACE} = $swiface;
1488         $ret{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1489         $ret{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1490         $ret{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
1491         $ret{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
1492         $ret{NSS_WRAPPER_MODULE_SO_PATH} = Samba::nss_wrapper_winbind_so_path($self);
1493         $ret{NSS_WRAPPER_MODULE_FN_PREFIX} = "winbind";
1494         if ($ENV{SAMBA_DNS_FAKING}) {
1495                 $ret{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
1496         } else {
1497                 $ret{RESOLV_WRAPPER_CONF} = $resolv_conf;
1498         }
1499         $ret{LOCAL_PATH} = "$shrdir";
1500         $ret{LOGDIR} = $logdir;
1501
1502         return \%ret;
1503 }
1504
1505 sub wait_for_start($$$$$)
1506 {
1507         my ($self, $envvars, $nmbd, $winbindd, $smbd) = @_;
1508         my $ret;
1509
1510         if ($nmbd eq "yes") {
1511                 my $count = 0;
1512
1513                 # give time for nbt server to register its names
1514                 print "checking for nmbd\n";
1515
1516                 # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
1517                 my $nmblookup = Samba::bindir_path($self, "nmblookup");
1518
1519                 do {
1520                         $ret = system("$nmblookup $envvars->{CONFIGURATION} $envvars->{SERVER}");
1521                         if ($ret != 0) {
1522                                 sleep(1);
1523                         } else {
1524                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
1525                                 system("$nmblookup $envvars->{CONFIGURATION} __SAMBA__");
1526                                 system("$nmblookup $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
1527                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
1528                         }
1529                         $count++;
1530                 } while ($ret != 0 && $count < 10);
1531                 if ($count == 10) {
1532                         print "NMBD not reachable after 10 retries\n";
1533                         teardown_env($self, $envvars);
1534                         return 0;
1535                 }
1536         }
1537
1538         if ($winbindd eq "yes") {
1539             print "checking for winbindd\n";
1540             my $count = 0;
1541             do {
1542                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --ping-dc");
1543                 if ($ret != 0) {
1544                     sleep(2);
1545                 }
1546                 $count++;
1547             } while ($ret != 0 && $count < 10);
1548             if ($count == 10) {
1549                 print "WINBINDD not reachable after 20 seconds\n";
1550                 teardown_env($self, $envvars);
1551                 return 0;
1552             }
1553         }
1554
1555         if ($smbd eq "yes") {
1556             # make sure smbd is also up set
1557             print "wait for smbd\n";
1558
1559             my $count = 0;
1560             do {
1561                 $ret = system(Samba::bindir_path($self, "smbclient3") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
1562                 if ($ret != 0) {
1563                     sleep(2);
1564                 }
1565                 $count++
1566             } while ($ret != 0 && $count < 10);
1567             if ($count == 10) {
1568                 print "SMBD failed to start up in a reasonable time (20sec)\n";
1569                 teardown_env($self, $envvars);
1570                 return 0;
1571             }
1572         }
1573
1574         # Ensure we have domain users mapped.
1575         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=513 unixgroup=domusers type=domain");
1576         if ($ret != 0) {
1577             return 1;
1578         }
1579         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=512 unixgroup=domadmins type=domain");
1580         if ($ret != 0) {
1581             return 1;
1582         }
1583
1584         if ($winbindd eq "yes") {
1585             # note: creating builtin groups requires winbindd for the
1586             # unix id allocator
1587             $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} sam createbuiltingroup Users");
1588             if ($ret != 0) {
1589                 print "Failed to create BUILTIN\\Users group\n";
1590                 return 0;
1591             }
1592             my $count = 0;
1593             do {
1594                 system(Samba::bindir_path($self, "net") . " $envvars->{CONFIGURATION} cache flush");
1595                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --sid-to-gid=S-1-5-32-545");
1596                 if ($ret != 0) {
1597                     sleep(2);
1598                 }
1599                 $count++;
1600             } while ($ret != 0 && $count < 10);
1601             if ($count == 10) {
1602                 print "WINBINDD not reachable after 20 seconds\n";
1603                 teardown_env($self, $envvars);
1604                 return 0;
1605             }
1606         }
1607
1608         print $self->getlog_env($envvars);
1609
1610         return 1;
1611 }
1612
1613 1;