selftest/target/Samba3.pm

   1 #!/usr/bin/perl
   2 # Bootstrap Samba and run a number of tests against it.
   3 # Copyright (C) 2005-2007 Jelmer Vernooij <jelmer@samba.org>
   4 # Published under the GNU GPL, v3 or later.
   5
   6 # NOTE: Refer to the README for more details about the various testenvs,
   7 # and tips about adding new testenvs.
   8
   9 package Samba3;
  10
  11 use strict;
  12 use Cwd qw(abs_path);
  13 use FindBin qw($RealBin);
  14 use POSIX;
  15 use target::Samba;
  16 use File::Path 'remove_tree';
  17
  18 sub have_ads($) {
  19         my ($self) = @_;
  20         my $found_ads = 0;
  21         my $smbd_build_options = Samba::bindir_path($self, "smbd") . " -b|";
  22         open(IN, $smbd_build_options) or die("Unable to run $smbd_build_options: $!");
  23
  24         while (<IN>) {
  25                 if (/WITH_ADS/) {
  26                        $found_ads = 1;
  27                 }
  28         }
  29         close IN;
  30
  31         # If we were not built with ADS support, pretend we were never even available
  32         print "smbd does not have ADS support\n" unless $found_ads;
  33         return $found_ads;
  34 }
  35
  36 # return smb.conf parameters applicable to @path, based on the underlying
  37 # filesystem type
  38 sub get_fs_specific_conf($$)
  39 {
  40         my ($self, $path) = @_;
  41         my $mods = "";
  42         my $stat_out = `stat --file-system $path` or return "";
  43
  44         if ($stat_out =~ m/Type:\s+btrfs/) {
  45                 $mods .= "streams_xattr btrfs";
  46         }
  47
  48         if ($mods) {
  49                 return "vfs objects = $mods";
  50         }
  51
  52         return undef;
  53 }
  54
  55 sub new($$) {
  56         my ($classname, $bindir, $srcdir, $server_maxtime) = @_;
  57         my $self = { vars => {},
  58                      bindir => $bindir,
  59                      srcdir => $srcdir,
  60                      server_maxtime => $server_maxtime
  61         };
  62         bless $self;
  63         return $self;
  64 }
  65
  66 sub teardown_env($$)
  67 {
  68         my ($self, $envvars) = @_;
  69         my $count = 0;
  70
  71         # This should cause smbd to terminate gracefully
  72         close($envvars->{STDIN_PIPE});
  73
  74         my $smbdpid = $envvars->{SMBD_TL_PID};
  75         my $nmbdpid = $envvars->{NMBD_TL_PID};
  76         my $winbinddpid = $envvars->{WINBINDD_TL_PID};
  77
  78         # This should give it time to write out the gcov data
  79         until ($count > 20) {
  80             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  81             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
  82             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
  83             if ($smbdchild == -1
  84                 && $nmbdchild == -1
  85                 && $winbinddchild == -1) {
  86                 last;
  87             }
  88             sleep(1);
  89             $count++;
  90         }
  91
  92         if ($count <= 20 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
  93             return;
  94         }
  95
  96         $self->stop_sig_term($smbdpid);
  97         $self->stop_sig_term($nmbdpid);
  98         $self->stop_sig_term($winbinddpid);
  99
 100         $count = 0;
 101         until ($count > 10) {
 102             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
 103             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
 104             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
 105             if ($smbdchild == -1
 106                 && $nmbdchild == -1
 107                 && $winbinddchild == -1) {
 108                 last;
 109             }
 110             sleep(1);
 111             $count++;
 112         }
 113
 114         if ($count <= 10 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
 115             return;
 116         }
 117
 118         warn("timelimit process did not quit on SIGTERM, sending SIGKILL");
 119         $self->stop_sig_kill($smbdpid);
 120         $self->stop_sig_kill($nmbdpid);
 121         $self->stop_sig_kill($winbinddpid);
 122
 123         return 0;
 124 }
 125
 126 sub getlog_env_app($$$)
 127 {
 128         my ($self, $envvars, $name) = @_;
 129
 130         my $title = "$name LOG of: $envvars->{NETBIOSNAME}\n";
 131         my $out = $title;
 132
 133         open(LOG, "<".$envvars->{$name."_TEST_LOG"});
 134
 135         seek(LOG, $envvars->{$name."_TEST_LOG_POS"}, SEEK_SET);
 136         while (<LOG>) {
 137                 $out .= $_;
 138         }
 139         $envvars->{$name."_TEST_LOG_POS"} = tell(LOG);
 140         close(LOG);
 141
 142         return "" if $out eq $title;
 143
 144         return $out;
 145 }
 146
 147 sub getlog_env($$)
 148 {
 149         my ($self, $envvars) = @_;
 150         my $ret = "";
 151
 152         $ret .= $self->getlog_env_app($envvars, "SMBD");
 153         $ret .= $self->getlog_env_app($envvars, "NMBD");
 154         $ret .= $self->getlog_env_app($envvars, "WINBINDD");
 155
 156         return $ret;
 157 }
 158
 159 sub check_env($$)
 160 {
 161         my ($self, $envvars) = @_;
 162
 163         my $childpid = waitpid(-1, WNOHANG);
 164
 165         # TODO ...
 166         return 1;
 167 }
 168
 169 # Declare the environments Samba3 makes available.
 170 # To be set up, they will be called as
 171 #   samba3->setup_$envname($self, $path, $dep_1_vars, $dep_2_vars, ...)
 172 %Samba3::ENV_DEPS = (
 173         # name              => [dep_1, dep_2, ...],
 174         nt4_dc              => [],
 175         nt4_dc_schannel     => [],
 176
 177         simpleserver        => [],
 178         fileserver          => [],
 179         maptoguest          => [],
 180         ktest               => [],
 181
 182         nt4_member          => ["nt4_dc"],
 183
 184         ad_member           => ["ad_dc"],
 185         ad_member_rfc2307   => ["ad_dc_ntvfs"],
 186         ad_member_idmap_rid => ["ad_dc"],
 187         ad_member_idmap_ad  => ["ad_dc"],
 188 );
 189
 190 sub setup_nt4_dc
 191 {
 192         my ($self, $path) = @_;
 193
 194         print "PROVISIONING NT4 DC...";
 195
 196         my $nt4_dc_options = "
 197         domain master = yes
 198         domain logons = yes
 199         lanman auth = yes
 200         ntlm auth = yes
 201         raw NTLMv2 auth = yes
 202         server schannel = auto
 203
 204         rpc_server:epmapper = external
 205         rpc_server:spoolss = external
 206         rpc_server:lsarpc = external
 207         rpc_server:samr = external
 208         rpc_server:netlogon = external
 209         rpc_server:register_embedded_np = yes
 210         rpc_server:FssagentRpc = external
 211
 212         rpc_daemon:epmd = fork
 213         rpc_daemon:spoolssd = fork
 214         rpc_daemon:lsasd = fork
 215         rpc_daemon:fssd = fork
 216         fss: sequence timeout = 1
 217         check parent directory delete on close = yes
 218 ";
 219
 220         my $vars = $self->provision($path, "SAMBA-TEST",
 221                                     "LOCALNT4DC2",
 222                                     "localntdc2pass",
 223                                     $nt4_dc_options);
 224
 225         $vars or return undef;
 226
 227         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 228                return undef;
 229         }
 230
 231         $vars->{DOMSID} = $vars->{SAMSID};
 232         $vars->{DC_SERVER} = $vars->{SERVER};
 233         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 234         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 235         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 236         $vars->{DC_USERNAME} = $vars->{USERNAME};
 237         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 238
 239         return $vars;
 240 }
 241
 242 sub setup_nt4_dc_schannel
 243 {
 244         my ($self, $path) = @_;
 245
 246         print "PROVISIONING NT4 DC WITH SERVER SCHANNEL ...";
 247
 248         my $pdc_options = "
 249         domain master = yes
 250         domain logons = yes
 251         lanman auth = yes
 252
 253         rpc_server:epmapper = external
 254         rpc_server:spoolss = external
 255         rpc_server:lsarpc = external
 256         rpc_server:samr = external
 257         rpc_server:netlogon = external
 258         rpc_server:register_embedded_np = yes
 259
 260         rpc_daemon:epmd = fork
 261         rpc_daemon:spoolssd = fork
 262         rpc_daemon:lsasd = fork
 263
 264         server schannel = yes
 265         # used to reproduce bug #12772
 266         server max protocol = SMB2_02
 267 ";
 268
 269         my $vars = $self->provision($path, "NT4SCHANNEL",
 270                                     "LOCALNT4DC9",
 271                                     "localntdc9pass",
 272                                     $pdc_options);
 273
 274         $vars or return undef;
 275
 276         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 277                return undef;
 278         }
 279
 280         $vars->{DOMSID} = $vars->{SAMSID};
 281         $vars->{DC_SERVER} = $vars->{SERVER};
 282         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 283         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 284         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 285         $vars->{DC_USERNAME} = $vars->{USERNAME};
 286         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 287
 288         return $vars;
 289 }
 290
 291 sub setup_nt4_member
 292 {
 293         my ($self, $prefix, $nt4_dc_vars) = @_;
 294         my $count = 0;
 295         my $rc;
 296
 297         print "PROVISIONING MEMBER...";
 298
 299         my $require_mutexes = "dbwrap_tdb_require_mutexes:* = yes";
 300         $require_mutexes = "" if ($ENV{SELFTEST_DONT_REQUIRE_TDB_MUTEX_SUPPORT} eq "1");
 301
 302         my $member_options = "
 303         security = domain
 304         dbwrap_tdb_mutexes:* = yes
 305         ${require_mutexes}
 306 ";
 307         my $ret = $self->provision($prefix, $nt4_dc_vars->{DOMAIN},
 308                                    "LOCALNT4MEMBER3",
 309                                    "localnt4member3pass",
 310                                    $member_options);
 311
 312         $ret or return undef;
 313
 314         my $nmblookup = Samba::bindir_path($self, "nmblookup");
 315         do {
 316                 print "Waiting for the LOGON SERVER registration ...\n";
 317                 $rc = system("$nmblookup $ret->{CONFIGURATION} $ret->{DOMAIN}\#1c");
 318                 if ($rc != 0) {
 319                         sleep(1);
 320                 }
 321                 $count++;
 322         } while ($rc != 0 && $count < 10);
 323         if ($count == 10) {
 324                 print "NMBD not reachable after 10 retries\n";
 325                 teardown_env($self, $ret);
 326                 return 0;
 327         }
 328
 329         my $net = Samba::bindir_path($self, "net");
 330         # Add hosts file for name lookups
 331         my $cmd = "NSS_WRAPPER_HOSTS='$ret->{NSS_WRAPPER_HOSTS}' ";
 332         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 333         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 334         $cmd .= "$net rpc join $ret->{CONFIGURATION} $nt4_dc_vars->{DOMAIN} member";
 335         $cmd .= " -U$nt4_dc_vars->{USERNAME}\%$nt4_dc_vars->{PASSWORD}";
 336
 337         if (system($cmd) != 0) {
 338             warn("Join failed\n$cmd");
 339             return undef;
 340         }
 341
 342         # Add hosts file for name lookups
 343         my $cmd = "NSS_WRAPPER_HOSTS='$ret->{NSS_WRAPPER_HOSTS}' ";
 344         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 345         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 346         $cmd .= "$net $ret->{CONFIGURATION} primarytrust dumpinfo | grep -q 'REDACTED SECRET VALUES'";
 347
 348         if (system($cmd) != 0) {
 349             warn("check failed\n$cmd");
 350             return undef;
 351         }
 352
 353         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 354                return undef;
 355         }
 356
 357         $ret->{DOMSID} = $nt4_dc_vars->{DOMSID};
 358         $ret->{DC_SERVER} = $nt4_dc_vars->{SERVER};
 359         $ret->{DC_SERVER_IP} = $nt4_dc_vars->{SERVER_IP};
 360         $ret->{DC_SERVER_IPV6} = $nt4_dc_vars->{SERVER_IPV6};
 361         $ret->{DC_NETBIOSNAME} = $nt4_dc_vars->{NETBIOSNAME};
 362         $ret->{DC_USERNAME} = $nt4_dc_vars->{USERNAME};
 363         $ret->{DC_PASSWORD} = $nt4_dc_vars->{PASSWORD};
 364
 365         return $ret;
 366 }
 367
 368 sub setup_ad_member
 369 {
 370         my ($self, $prefix, $dcvars) = @_;
 371
 372         my $prefix_abs = abs_path($prefix);
 373         my @dirs = ();
 374
 375         # If we didn't build with ADS, pretend this env was never available
 376         if (not $self->have_ads()) {
 377                 return "UNKNOWN";
 378         }
 379
 380         print "PROVISIONING S3 AD MEMBER...";
 381
 382         mkdir($prefix_abs, 0777);
 383
 384         my $share_dir="$prefix_abs/share";
 385         push(@dirs, $share_dir);
 386
 387         my $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}";
 388         push(@dirs, $substitution_path);
 389
 390         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/U_alice";
 391         push(@dirs, $substitution_path);
 392
 393         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/U_alice/G_domain users";
 394         push(@dirs, $substitution_path);
 395
 396         # Using '/' as the winbind separator is a bad idea ...
 397         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/u_$dcvars->{DOMAIN}";
 398         push(@dirs, $substitution_path);
 399
 400         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/u_$dcvars->{DOMAIN}/alice";
 401         push(@dirs, $substitution_path);
 402
 403         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/u_$dcvars->{DOMAIN}/alice/g_$dcvars->{DOMAIN}";
 404         push(@dirs, $substitution_path);
 405
 406         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/u_$dcvars->{DOMAIN}/alice/g_$dcvars->{DOMAIN}/domain users";
 407         push(@dirs, $substitution_path);
 408
 409         my $member_options = "
 410         security = ads
 411         workgroup = $dcvars->{DOMAIN}
 412         realm = $dcvars->{REALM}
 413         netbios aliases = foo bar
 414         template homedir = /home/%D/%G/%U
 415
 416 [sub_dug]
 417         path = $share_dir/D_%D/U_%U/G_%G
 418         writeable = yes
 419
 420 [sub_dug2]
 421         path = $share_dir/D_%D/u_%u/g_%g
 422         writeable = yes
 423
 424 ";
 425
 426         my $ret = $self->provision($prefix, $dcvars->{DOMAIN},
 427                                    "LOCALADMEMBER",
 428                                    "loCalMemberPass",
 429                                    $member_options,
 430                                    $dcvars->{SERVER_IP},
 431                                    $dcvars->{SERVER_IPV6});
 432
 433         $ret or return undef;
 434
 435         mkdir($_, 0777) foreach(@dirs);
 436
 437         close(USERMAP);
 438         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 439         $ret->{REALM} = $dcvars->{REALM};
 440         $ret->{DOMSID} = $dcvars->{DOMSID};
 441
 442         my $ctx;
 443         $ctx = {};
 444         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 445         $ctx->{domain} = $dcvars->{DOMAIN};
 446         $ctx->{realm} = $dcvars->{REALM};
 447         $ctx->{dnsname} = lc($dcvars->{REALM});
 448         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 449         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 450         $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
 451         Samba::mk_krb5_conf($ctx, "");
 452
 453         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 454         $ret->{RESOLV_CONF} = $dcvars->{RESOLV_CONF};
 455
 456         my $net = Samba::bindir_path($self, "net");
 457         # Add hosts file for name lookups
 458         my $cmd = "NSS_WRAPPER_HOSTS='$ret->{NSS_WRAPPER_HOSTS}' ";
 459         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 460         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 461                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 462         } else {
 463                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 464         }
 465         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 466         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 467         $cmd .= "$net join $ret->{CONFIGURATION}";
 468         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 469
 470         if (system($cmd) != 0) {
 471             warn("Join failed\n$cmd");
 472             return undef;
 473         }
 474
 475         # We need world access to this share, as otherwise the domain
 476         # administrator from the AD domain provided by Samba4 can't
 477         # access the share for tests.
 478         chmod 0777, "$prefix/share";
 479
 480         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 481                 return undef;
 482         }
 483
 484         $ret->{DC_SERVER} = $dcvars->{SERVER};
 485         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 486         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 487         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 488         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 489         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 490
 491         return $ret;
 492 }
 493
 494 sub setup_ad_member_rfc2307
 495 {
 496         my ($self, $prefix, $dcvars) = @_;
 497
 498         # If we didn't build with ADS, pretend this env was never available
 499         if (not $self->have_ads()) {
 500                 return "UNKNOWN";
 501         }
 502
 503         print "PROVISIONING S3 AD MEMBER WITH idmap_rfc2307 config...";
 504
 505         my $member_options = "
 506         security = ads
 507         workgroup = $dcvars->{DOMAIN}
 508         realm = $dcvars->{REALM}
 509         idmap cache time = 0
 510         idmap negative cache time = 0
 511         idmap config * : backend = autorid
 512         idmap config * : range = 1000000-1999999
 513         idmap config * : rangesize = 100000
 514         idmap config $dcvars->{DOMAIN} : backend = rfc2307
 515         idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
 516         idmap config $dcvars->{DOMAIN} : ldap_server = ad
 517         idmap config $dcvars->{DOMAIN} : bind_path_user = ou=idmap,dc=samba,dc=example,dc=com
 518         idmap config $dcvars->{DOMAIN} : bind_path_group = ou=idmap,dc=samba,dc=example,dc=com
 519
 520         password server = $dcvars->{SERVER}
 521 ";
 522
 523         my $ret = $self->provision($prefix, $dcvars->{DOMAIN},
 524                                    "RFC2307MEMBER",
 525                                    "loCalMemberPass",
 526                                    $member_options,
 527                                    $dcvars->{SERVER_IP},
 528                                    $dcvars->{SERVER_IPV6});
 529
 530         $ret or return undef;
 531
 532         close(USERMAP);
 533         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 534         $ret->{REALM} = $dcvars->{REALM};
 535         $ret->{DOMSID} = $dcvars->{DOMSID};
 536
 537         my $ctx;
 538         my $prefix_abs = abs_path($prefix);
 539         $ctx = {};
 540         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 541         $ctx->{domain} = $dcvars->{DOMAIN};
 542         $ctx->{realm} = $dcvars->{REALM};
 543         $ctx->{dnsname} = lc($dcvars->{REALM});
 544         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 545         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 546         $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
 547         Samba::mk_krb5_conf($ctx, "");
 548
 549         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 550         $ret->{RESOLV_CONF} = $dcvars->{RESOLV_CONF};
 551
 552         my $net = Samba::bindir_path($self, "net");
 553         # Add hosts file for name lookups
 554         my $cmd = "NSS_WRAPPER_HOSTS='$ret->{NSS_WRAPPER_HOSTS}' ";
 555         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 556         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 557                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 558         } else {
 559                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 560         }
 561         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 562         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 563         $cmd .= "$net join $ret->{CONFIGURATION}";
 564         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 565
 566         if (system($cmd) != 0) {
 567             warn("Join failed\n$cmd");
 568             return undef;
 569         }
 570
 571         # We need world access to this share, as otherwise the domain
 572         # administrator from the AD domain provided by Samba4 can't
 573         # access the share for tests.
 574         chmod 0777, "$prefix/share";
 575
 576         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 577                 return undef;
 578         }
 579
 580         $ret->{DC_SERVER} = $dcvars->{SERVER};
 581         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 582         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 583         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 584         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 585         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 586
 587         return $ret;
 588 }
 589
 590 sub setup_ad_member_idmap_rid
 591 {
 592         my ($self, $prefix, $dcvars) = @_;
 593
 594         # If we didn't build with ADS, pretend this env was never available
 595         if (not $self->have_ads()) {
 596                 return "UNKNOWN";
 597         }
 598
 599         print "PROVISIONING S3 AD MEMBER WITH idmap_rid config...";
 600
 601         my $member_options = "
 602         security = ads
 603         workgroup = $dcvars->{DOMAIN}
 604         realm = $dcvars->{REALM}
 605         idmap config * : backend = tdb
 606         idmap config * : range = 1000000-1999999
 607         idmap config $dcvars->{DOMAIN} : backend = rid
 608         idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
 609         # Prevent overridding the provisioned lib/krb5.conf which sets certain
 610         # values required for tests to succeed
 611         create krb5 conf = no
 612 ";
 613
 614         my $ret = $self->provision($prefix, $dcvars->{DOMAIN},
 615                                    "IDMAPRIDMEMBER",
 616                                    "loCalMemberPass",
 617                                    $member_options,
 618                                    $dcvars->{SERVER_IP},
 619                                    $dcvars->{SERVER_IPV6});
 620
 621         $ret or return undef;
 622
 623         close(USERMAP);
 624         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 625         $ret->{REALM} = $dcvars->{REALM};
 626         $ret->{DOMSID} = $dcvars->{DOMSID};
 627
 628         my $ctx;
 629         my $prefix_abs = abs_path($prefix);
 630         $ctx = {};
 631         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 632         $ctx->{domain} = $dcvars->{DOMAIN};
 633         $ctx->{realm} = $dcvars->{REALM};
 634         $ctx->{dnsname} = lc($dcvars->{REALM});
 635         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 636         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 637         $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
 638         Samba::mk_krb5_conf($ctx, "");
 639
 640         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 641         $ret->{RESOLV_CONF} = $dcvars->{RESOLV_CONF};
 642
 643         my $net = Samba::bindir_path($self, "net");
 644         # Add hosts file for name lookups
 645         my $cmd = "NSS_WRAPPER_HOSTS='$ret->{NSS_WRAPPER_HOSTS}' ";
 646         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 647         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 648                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 649         } else {
 650                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 651         }
 652         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 653         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 654         $cmd .= "$net join $ret->{CONFIGURATION}";
 655         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 656
 657         if (system($cmd) != 0) {
 658             warn("Join failed\n$cmd");
 659             return undef;
 660         }
 661
 662         # We need world access to this share, as otherwise the domain
 663         # administrator from the AD domain provided by Samba4 can't
 664         # access the share for tests.
 665         chmod 0777, "$prefix/share";
 666
 667         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 668                 return undef;
 669         }
 670
 671         $ret->{DC_SERVER} = $dcvars->{SERVER};
 672         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 673         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 674         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 675         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 676         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 677
 678         return $ret;
 679 }
 680
 681 sub setup_ad_member_idmap_ad
 682 {
 683         my ($self, $prefix, $dcvars) = @_;
 684
 685         # If we didn't build with ADS, pretend this env was never available
 686         if (not $self->have_ads()) {
 687                 return "UNKNOWN";
 688         }
 689
 690         print "PROVISIONING S3 AD MEMBER WITH idmap_ad config...";
 691
 692         my $member_options = "
 693         security = ads
 694         workgroup = $dcvars->{DOMAIN}
 695         realm = $dcvars->{REALM}
 696         password server = $dcvars->{SERVER}
 697         idmap config * : backend = tdb
 698         idmap config * : range = 1000000-1999999
 699         idmap config $dcvars->{DOMAIN} : backend = ad
 700         idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
 701 ";
 702
 703         my $ret = $self->provision($prefix, $dcvars->{DOMAIN},
 704                                    "IDMAPADMEMBER",
 705                                    "loCalMemberPass",
 706                                    $member_options,
 707                                    $dcvars->{SERVER_IP},
 708                                    $dcvars->{SERVER_IPV6});
 709
 710         $ret or return undef;
 711
 712         close(USERMAP);
 713         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 714         $ret->{REALM} = $dcvars->{REALM};
 715         $ret->{DOMSID} = $dcvars->{DOMSID};
 716
 717         my $ctx;
 718         my $prefix_abs = abs_path($prefix);
 719         $ctx = {};
 720         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 721         $ctx->{domain} = $dcvars->{DOMAIN};
 722         $ctx->{realm} = $dcvars->{REALM};
 723         $ctx->{dnsname} = lc($dcvars->{REALM});
 724         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 725         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 726         $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
 727         Samba::mk_krb5_conf($ctx, "");
 728
 729         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 730         $ret->{RESOLV_CONF} = $dcvars->{RESOLV_CONF};
 731
 732         my $net = Samba::bindir_path($self, "net");
 733         # Add hosts file for name lookups
 734         my $cmd = "NSS_WRAPPER_HOSTS='$ret->{NSS_WRAPPER_HOSTS}' ";
 735         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 736         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 737                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 738         } else {
 739                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 740         }
 741         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 742         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 743         $cmd .= "$net join $ret->{CONFIGURATION}";
 744         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 745
 746         if (system($cmd) != 0) {
 747             warn("Join failed\n$cmd");
 748             return undef;
 749         }
 750
 751         # We need world access to this share, as otherwise the domain
 752         # administrator from the AD domain provided by Samba4 can't
 753         # access the share for tests.
 754         chmod 0777, "$prefix/share";
 755
 756         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 757                 return undef;
 758         }
 759
 760         $ret->{DC_SERVER} = $dcvars->{SERVER};
 761         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 762         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 763         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 764         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 765         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 766
 767         return $ret;
 768 }
 769
 770 sub setup_simpleserver
 771 {
 772         my ($self, $path) = @_;
 773
 774         print "PROVISIONING simple server...";
 775
 776         my $prefix_abs = abs_path($path);
 777
 778         my $simpleserver_options = "
 779         lanman auth = yes
 780         ntlm auth = yes
 781         vfs objects = xattr_tdb streams_depot
 782         change notify = no
 783         smb encrypt = off
 784
 785 [vfs_aio_pthread]
 786         path = $prefix_abs/share
 787         read only = no
 788         vfs objects = aio_pthread
 789         aio_pthread:aio open = yes
 790         smbd:async dosmode = no
 791
 792 [vfs_aio_pthread_async_dosmode_default1]
 793         path = $prefix_abs/share
 794         read only = no
 795         vfs objects = aio_pthread
 796         store dos attributes = yes
 797         aio_pthread:aio open = yes
 798         smbd:async dosmode = yes
 799
 800 [vfs_aio_pthread_async_dosmode_default2]
 801         path = $prefix_abs/share
 802         read only = no
 803         vfs objects = aio_pthread xattr_tdb
 804         store dos attributes = yes
 805         aio_pthread:aio open = yes
 806         smbd:async dosmode = yes
 807
 808 [vfs_aio_pthread_async_dosmode_force_sync1]
 809         path = $prefix_abs/share
 810         read only = no
 811         vfs objects = aio_pthread
 812         store dos attributes = yes
 813         aio_pthread:aio open = yes
 814         smbd:async dosmode = yes
 815         # This simulates non linux systems
 816         smbd:force sync user path safe threadpool = yes
 817         smbd:force sync user chdir safe threadpool = yes
 818         smbd:force sync root path safe threadpool = yes
 819         smbd:force sync root chdir safe threadpool = yes
 820
 821 [vfs_aio_pthread_async_dosmode_force_sync2]
 822         path = $prefix_abs/share
 823         read only = no
 824         vfs objects = aio_pthread xattr_tdb
 825         store dos attributes = yes
 826         aio_pthread:aio open = yes
 827         smbd:async dosmode = yes
 828         # This simulates non linux systems
 829         smbd:force sync user path safe threadpool = yes
 830         smbd:force sync user chdir safe threadpool = yes
 831         smbd:force sync root path safe threadpool = yes
 832         smbd:force sync root chdir safe threadpool = yes
 833
 834 [vfs_aio_fork]
 835         path = $prefix_abs/share
 836         vfs objects = aio_fork
 837         read only = no
 838         vfs_aio_fork:erratic_testing_mode=yes
 839
 840 [dosmode]
 841         path = $prefix_abs/share
 842         vfs objects =
 843         store dos attributes = yes
 844         hide files = /hidefile/
 845         hide dot files = yes
 846
 847 [enc_desired]
 848         path = $prefix_abs/share
 849         vfs objects =
 850         smb encrypt = desired
 851
 852 [hidenewfiles]
 853         path = $prefix_abs/share
 854         hide new files timeout = 5
 855 ";
 856
 857         my $vars = $self->provision($path, "WORKGROUP",
 858                                     "LOCALSHARE4",
 859                                     "local4pass",
 860                                     $simpleserver_options);
 861
 862         $vars or return undef;
 863
 864         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 865                return undef;
 866         }
 867
 868         return $vars;
 869 }
 870
 871 sub setup_fileserver
 872 {
 873         my ($self, $path) = @_;
 874         my $prefix_abs = abs_path($path);
 875         my $srcdir_abs = abs_path($self->{srcdir});
 876
 877         print "PROVISIONING file server ...\n";
 878
 879         my @dirs = ();
 880
 881         mkdir($prefix_abs, 0777);
 882
 883         my $usershare_dir="$prefix_abs/lib/usershare";
 884
 885         mkdir("$prefix_abs/lib", 0755);
 886         remove_tree($usershare_dir);
 887         mkdir($usershare_dir, 01770);
 888
 889         my $share_dir="$prefix_abs/share";
 890
 891         # Create share directory structure
 892         my $lower_case_share_dir="$share_dir/lower-case";
 893         push(@dirs, $lower_case_share_dir);
 894
 895         my $lower_case_share_dir_30000="$share_dir/lower-case-30000";
 896         push(@dirs, $lower_case_share_dir_30000);
 897
 898         my $dfree_share_dir="$share_dir/dfree";
 899         push(@dirs, $dfree_share_dir);
 900         push(@dirs, "$dfree_share_dir/subdir1");
 901         push(@dirs, "$dfree_share_dir/subdir2");
 902         push(@dirs, "$dfree_share_dir/subdir3");
 903
 904         my $quotadir_dir="$share_dir/quota";
 905         push(@dirs, $quotadir_dir);
 906
 907         my $valid_users_sharedir="$share_dir/valid_users";
 908         push(@dirs,$valid_users_sharedir);
 909
 910         my $offline_sharedir="$share_dir/offline";
 911         push(@dirs,$offline_sharedir);
 912
 913         my $force_user_valid_users_dir = "$share_dir/force_user_valid_users";
 914         push(@dirs, $force_user_valid_users_dir);
 915
 916         my $smbget_sharedir="$share_dir/smbget";
 917         push(@dirs,$smbget_sharedir);
 918
 919         my $tarmode_sharedir="$share_dir/tarmode";
 920         push(@dirs,$tarmode_sharedir);
 921
 922         my $usershare_sharedir="$share_dir/usershares";
 923         push(@dirs,$usershare_sharedir);
 924
 925         my $fileserver_options = "
 926         kernel change notify = yes
 927
 928         usershare path = $usershare_dir
 929         usershare max shares = 10
 930         usershare allow guests = yes
 931         usershare prefix allow list = $usershare_sharedir
 932
 933         get quota command = $prefix_abs/getset_quota.py
 934         set quota command = $prefix_abs/getset_quota.py
 935 [lowercase]
 936         path = $lower_case_share_dir
 937         comment = smb username is [%U]
 938         case sensitive = True
 939         default case = lower
 940         preserve case = no
 941         short preserve case = no
 942 [lowercase-30000]
 943         path = $lower_case_share_dir_30000
 944         comment = smb username is [%U]
 945         case sensitive = True
 946         default case = lower
 947         preserve case = no
 948         short preserve case = no
 949 [dfree]
 950         path = $dfree_share_dir
 951         comment = smb username is [%U]
 952         dfree command = $srcdir_abs/testprogs/blackbox/dfree.sh
 953 [valid-users-access]
 954         path = $valid_users_sharedir
 955         valid users = +userdup
 956 [offline]
 957         path = $offline_sharedir
 958         vfs objects = offline
 959
 960 # BUG: https://bugzilla.samba.org/show_bug.cgi?id=9878
 961 # RH BUG: https://bugzilla.redhat.com/show_bug.cgi?id=1077651
 962 [force_user_valid_users]
 963         path = $force_user_valid_users_dir
 964         comment = force user with valid users combination test share
 965         valid users = +force_user
 966         force user = force_user
 967         force group = everyone
 968         write list = force_user
 969
 970 [smbget]
 971         path = $smbget_sharedir
 972         comment = smb username is [%U]
 973         guest ok = yes
 974 [ign_sysacls]
 975         path = $share_dir
 976         comment = ignore system acls
 977         acl_xattr:ignore system acls = yes
 978 [inherit_owner]
 979         path = $share_dir
 980         comment = inherit owner
 981         inherit owner = yes
 982 [inherit_owner_u]
 983         path = $share_dir
 984         comment = inherit only unix owner
 985         inherit owner = unix only
 986         acl_xattr:ignore system acls = yes
 987 # BUG: https://bugzilla.samba.org/show_bug.cgi?id=13690
 988 [force_group_test]
 989         path = $share_dir
 990         comment = force group test
 991 #       force group = everyone
 992 [homes]
 993         comment = Home directories
 994         browseable = No
 995         read only = No
 996 ";
 997
 998         my $vars = $self->provision($path, "WORKGROUP",
 999                                     "FILESERVER",
1000                                     "fileserver",
1001                                     $fileserver_options,
1002                                     undef,
1003                                     undef,
1004                                     1);
1005
1006         $vars or return undef;
1007
1008         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
1009                return undef;
1010         }
1011
1012
1013         mkdir($_, 0777) foreach(@dirs);
1014
1015         ## Create case sensitive lower case share dir
1016         foreach my $file ('a'..'z') {
1017                 my $full_path = $lower_case_share_dir . '/' . $file;
1018                 open my $fh, '>', $full_path;
1019                 # Add some content to file
1020                 print $fh $full_path;
1021                 close $fh;
1022         }
1023
1024         for (my $file = 1; $file < 51; ++$file) {
1025                 my $full_path = $lower_case_share_dir . '/' . $file;
1026                 open my $fh, '>', $full_path;
1027                 # Add some content to file
1028                 print $fh $full_path;
1029                 close $fh;
1030         }
1031
1032         # Create content for 30000 share
1033         foreach my $file ('a'..'z') {
1034                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
1035                 open my $fh, '>', $full_path;
1036                 # Add some content to file
1037                 print $fh $full_path;
1038                 close $fh;
1039         }
1040
1041         for (my $file = 1; $file < 30001; ++$file) {
1042                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
1043                 open my $fh, '>', $full_path;
1044                 # Add some content to file
1045                 print $fh $full_path;
1046                 close $fh;
1047         }
1048
1049         ##
1050         ## create a listable file in valid_users_share
1051         ##
1052         my $valid_users_target = "$valid_users_sharedir/foo";
1053         unless (open(VALID_USERS_TARGET, ">$valid_users_target")) {
1054                 warn("Unable to open $valid_users_target");
1055                 return undef;
1056         }
1057         close(VALID_USERS_TARGET);
1058         chmod 0644, $valid_users_target;
1059
1060         return $vars;
1061 }
1062
1063 sub setup_ktest
1064 {
1065         my ($self, $prefix) = @_;
1066
1067         # If we didn't build with ADS, pretend this env was never available
1068         if (not $self->have_ads()) {
1069                 return "UNKNOWN";
1070         }
1071
1072         print "PROVISIONING server with security=ads...";
1073
1074         my $ktest_options = "
1075         workgroup = KTEST
1076         realm = ktest.samba.example.com
1077         security = ads
1078         username map = $prefix/lib/username.map
1079         server signing = required
1080         server min protocol = SMB3_00
1081         client max protocol = SMB3
1082
1083         # This disables NTLM auth against the local SAM, which
1084         # we use can then test this setting by.
1085         ntlm auth = disabled
1086 ";
1087
1088         my $ret = $self->provision($prefix, "KTEST",
1089                                    "LOCALKTEST6",
1090                                    "localktest6pass",
1091                                    $ktest_options);
1092
1093         $ret or return undef;
1094
1095         my $ctx;
1096         my $prefix_abs = abs_path($prefix);
1097         $ctx = {};
1098         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
1099         $ctx->{domain} = "KTEST";
1100         $ctx->{realm} = "KTEST.SAMBA.EXAMPLE.COM";
1101         $ctx->{dnsname} = lc($ctx->{realm});
1102         $ctx->{kdc_ipv4} = "0.0.0.0";
1103         $ctx->{kdc_ipv6} = "::";
1104         $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
1105         Samba::mk_krb5_conf($ctx, "");
1106
1107         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
1108
1109         open(USERMAP, ">$prefix/lib/username.map") or die("Unable to open $prefix/lib/username.map");
1110         print USERMAP "
1111 $ret->{USERNAME} = KTEST\\Administrator
1112 ";
1113         close(USERMAP);
1114
1115 #This is the secrets.tdb created by 'net ads join' from Samba3 to a
1116 #Samba4 DC with the same parameters as are being used here.  The
1117 #domain SID is S-1-5-21-1071277805-689288055-3486227160
1118         $ret->{SAMSID} = "S-1-5-21-1911091480-1468226576-2729736297";
1119         $ret->{DOMSID} = "S-1-5-21-1071277805-689288055-3486227160";
1120
1121         system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb $prefix/private/secrets.tdb");
1122         chmod 0600, "$prefix/private/secrets.tdb";
1123
1124 #Make sure there's no old ntdb file.
1125         system("rm -f $prefix/private/secrets.ntdb");
1126
1127 #This uses a pre-calculated krb5 credentials cache, obtained by running Samba4 with:
1128 # "--option=kdc:service ticket lifetime=239232" "--option=kdc:user ticket lifetime=239232" "--option=kdc:renewal lifetime=239232"
1129 #
1130 #and having in krb5.conf:
1131 # ticket_lifetime = 799718400
1132 # renew_lifetime = 799718400
1133 #
1134 # The commands for the -2 keytab where were:
1135 # kinit administrator@KTEST.SAMBA.EXAMPLE.COM
1136 # kvno host/localktest6@KTEST.SAMBA.EXAMPLE.COM
1137 # kvno cifs/localktest6@KTEST.SAMBA.EXAMPLE.COM
1138 # kvno host/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
1139 # kvno cifs/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
1140 #
1141 # and then for the -3 keytab, I did
1142 #
1143 # net changetrustpw; kdestroy and the same again.
1144 #
1145 # This creates a credential cache with a very long lifetime (2036 at
1146 # at 2011-04), and shows that running 'net changetrustpw' does not
1147 # break existing logins (for the secrets.tdb method at least).
1148 #
1149
1150         $ret->{KRB5_CCACHE}="FILE:$prefix/krb5_ccache";
1151
1152         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-2 $prefix/krb5_ccache-2");
1153         chmod 0600, "$prefix/krb5_ccache-2";
1154
1155         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-3 $prefix/krb5_ccache-3");
1156         chmod 0600, "$prefix/krb5_ccache-3";
1157
1158         # We need world access to this share, as otherwise the domain
1159         # administrator from the AD domain provided by ktest can't
1160         # access the share for tests.
1161         chmod 0777, "$prefix/share";
1162
1163         if (not $self->check_or_start($ret, "yes", "no", "yes")) {
1164                return undef;
1165         }
1166         return $ret;
1167 }
1168
1169 sub setup_maptoguest
1170 {
1171         my ($self, $path) = @_;
1172
1173         print "PROVISIONING maptoguest...";
1174
1175         my $options = "
1176 map to guest = bad user
1177 ntlm auth = yes
1178 ";
1179
1180         my $vars = $self->provision($path, "WORKGROUP",
1181                                     "maptoguest",
1182                                     "maptoguestpass",
1183                                     $options);
1184
1185         $vars or return undef;
1186
1187         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
1188                return undef;
1189         }
1190
1191         return $vars;
1192 }
1193
1194 sub stop_sig_term($$) {
1195         my ($self, $pid) = @_;
1196         kill("USR1", $pid) or kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
1197 }
1198
1199 sub stop_sig_kill($$) {
1200         my ($self, $pid) = @_;
1201         kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
1202 }
1203
1204 sub write_pid($$$)
1205 {
1206         my ($env_vars, $app, $pid) = @_;
1207
1208         open(PID, ">$env_vars->{PIDDIR}/timelimit.$app.pid");
1209         print PID $pid;
1210         close(PID);
1211 }
1212
1213 sub read_pid($$)
1214 {
1215         my ($env_vars, $app) = @_;
1216
1217         open(PID, "<$env_vars->{PIDDIR}/timelimit.$app.pid");
1218         my $pid = <PID>;
1219         close(PID);
1220         return $pid;
1221 }
1222
1223 sub check_or_start($$$$$) {
1224         my ($self, $env_vars, $nmbd, $winbindd, $smbd) = @_;
1225
1226         # use a pipe for stdin in the child processes. This allows
1227         # those processes to monitor the pipe for EOF to ensure they
1228         # exit when the test script exits
1229         pipe(STDIN_READER, $env_vars->{STDIN_PIPE});
1230
1231         unlink($env_vars->{NMBD_TEST_LOG});
1232         print "STARTING NMBD...";
1233         my $pid = fork();
1234         if ($pid == 0) {
1235                 open STDOUT, ">$env_vars->{NMBD_TEST_LOG}";
1236                 open STDERR, '>&STDOUT';
1237
1238                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
1239
1240                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
1241                 $ENV{KRB5CCNAME} = "$env_vars->{KRB5_CCACHE}.nmbd";
1242                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
1243                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
1244
1245                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
1246                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
1247                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
1248                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
1249                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
1250                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
1251                 $ENV{UID_WRAPPER_ROOT} = "1";
1252
1253                 $ENV{ENVNAME} = "$ENV{ENVNAME}.nmbd";
1254
1255                 if ($nmbd ne "yes") {
1256                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
1257                                 my $signame = shift;
1258                                 print("Skip nmbd received signal $signame");
1259                                 exit 0;
1260                         };
1261                         sleep($self->{server_maxtime});
1262                         exit 0;
1263                 }
1264
1265                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
1266                 my @optargs = ("-d0");
1267                 if (defined($ENV{NMBD_OPTIONS})) {
1268                         @optargs = split(/ /, $ENV{NMBD_OPTIONS});
1269                 }
1270                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
1271                 if(defined($ENV{NMBD_VALGRIND})) {
1272                         @preargs = split(/ /, $ENV{NMBD_VALGRIND});
1273                 }
1274                 my @args = ("-F", "--no-process-group",
1275                             "-s", $env_vars->{SERVERCONFFILE},
1276                             "-l", $env_vars->{LOGDIR});
1277                 if (not defined($ENV{NMBD_DONT_LOG_STDOUT})) {
1278                         push(@args, "--log-stdout");
1279                 }
1280
1281                 close($env_vars->{STDIN_PIPE});
1282                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1283
1284                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1285                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1286         }
1287         $env_vars->{NMBD_TL_PID} = $pid;
1288         write_pid($env_vars, "nmbd", $pid);
1289         print "DONE\n";
1290
1291         unlink($env_vars->{WINBINDD_TEST_LOG});
1292         print "STARTING WINBINDD...";
1293         $pid = fork();
1294         if ($pid == 0) {
1295                 open STDOUT, ">$env_vars->{WINBINDD_TEST_LOG}";
1296                 open STDERR, '>&STDOUT';
1297
1298                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
1299
1300                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
1301                 $ENV{KRB5CCNAME} = "$env_vars->{KRB5_CCACHE}.winbindd";
1302                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
1303                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
1304
1305                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
1306                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
1307                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
1308                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
1309                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
1310                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
1311                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
1312                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
1313                 } else {
1314                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
1315                 }
1316                 $ENV{UID_WRAPPER_ROOT} = "1";
1317
1318                 $ENV{ENVNAME} = "$ENV{ENVNAME}.winbindd";
1319
1320                 if ($winbindd ne "yes") {
1321                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
1322                                 my $signame = shift;
1323                                 print("Skip winbindd received signal $signame");
1324                                 exit 0;
1325                         };
1326                         sleep($self->{server_maxtime});
1327                         exit 0;
1328                 }
1329
1330                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
1331                 my @optargs = ("-d0");
1332                 if (defined($ENV{WINBINDD_OPTIONS})) {
1333                         @optargs = split(/ /, $ENV{WINBINDD_OPTIONS});
1334                 }
1335                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
1336                 if(defined($ENV{WINBINDD_VALGRIND})) {
1337                         @preargs = split(/ /, $ENV{WINBINDD_VALGRIND});
1338                 }
1339                 my @args = ("-F", "--no-process-group",
1340                             "-s", $env_vars->{SERVERCONFFILE},
1341                             "-l", $env_vars->{LOGDIR});
1342                 if (not defined($ENV{WINBINDD_DONT_LOG_STDOUT})) {
1343                         push(@args, "--stdout");
1344                 }
1345
1346                 close($env_vars->{STDIN_PIPE});
1347                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1348
1349                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1350                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1351         }
1352         $env_vars->{WINBINDD_TL_PID} = $pid;
1353         write_pid($env_vars, "winbindd", $pid);
1354         print "DONE\n";
1355
1356         unlink($env_vars->{SMBD_TEST_LOG});
1357         print "STARTING SMBD...";
1358         $pid = fork();
1359         if ($pid == 0) {
1360                 open STDOUT, ">$env_vars->{SMBD_TEST_LOG}";
1361                 open STDERR, '>&STDOUT';
1362
1363                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
1364
1365                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
1366                 $ENV{KRB5CCNAME} = "$env_vars->{KRB5_CCACHE}.smbd";
1367                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
1368                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
1369
1370                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
1371                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
1372                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
1373                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
1374                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
1375                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
1376                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
1377                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
1378                 } else {
1379                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
1380                 }
1381                 $ENV{UID_WRAPPER_ROOT} = "1";
1382
1383                 $ENV{ENVNAME} = "$ENV{ENVNAME}.smbd";
1384
1385                 if ($smbd ne "yes") {
1386                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
1387                                 my $signame = shift;
1388                                 print("Skip smbd received signal $signame");
1389                                 exit 0;
1390                         };
1391                         sleep($self->{server_maxtime});
1392                         exit 0;
1393                 }
1394
1395                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "smbd");
1396                 my @optargs = ("-d0");
1397                 if (defined($ENV{SMBD_OPTIONS})) {
1398                         @optargs = split(/ /, $ENV{SMBD_OPTIONS});
1399                 }
1400                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
1401                 if(defined($ENV{SMBD_VALGRIND})) {
1402                         @preargs = split(/ /,$ENV{SMBD_VALGRIND});
1403                 }
1404                 my @args = ("-F", "--no-process-group",
1405                             "-s", $env_vars->{SERVERCONFFILE},
1406                             "-l", $env_vars->{LOGDIR});
1407                 if (not defined($ENV{SMBD_DONT_LOG_STDOUT})) {
1408                         push(@args, "--log-stdout");
1409                 }
1410
1411                 close($env_vars->{STDIN_PIPE});
1412                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1413
1414                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1415                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1416         }
1417         $env_vars->{SMBD_TL_PID} = $pid;
1418         write_pid($env_vars, "smbd", $pid);
1419         print "DONE\n";
1420
1421         close(STDIN_READER);
1422
1423         return $self->wait_for_start($env_vars, $nmbd, $winbindd, $smbd);
1424 }
1425
1426 sub createuser($$$$$)
1427 {
1428         my ($self, $username, $password, $conffile, $env) = @_;
1429         my $cmd = "UID_WRAPPER_ROOT=1 " . Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $username > /dev/null";
1430
1431         keys %$env;
1432         while(my($var, $val) = each %$env) {
1433                 $cmd = "$var=\"$val\" $cmd";
1434         }
1435
1436         unless (open(PWD, "|$cmd")) {
1437             warn("Unable to set password for $username account\n$cmd");
1438             return undef;
1439         }
1440         print PWD "$password\n$password\n";
1441         unless (close(PWD)) {
1442             warn("Unable to set password for $username account\n$cmd");
1443             return undef;
1444         }
1445 }
1446
1447 sub provision($$$$$$$$$)
1448 {
1449         my ($self, $prefix, $domain, $server, $password, $extra_options, $dc_server_ip, $dc_server_ipv6, $no_delete_prefix) = @_;
1450
1451         ##
1452         ## setup the various environment variables we need
1453         ##
1454
1455         my $samsid = Samba::random_domain_sid();
1456         my $swiface = Samba::get_interface($server);
1457         my %ret = ();
1458         my %createuser_env = ();
1459         my $server_ip = "127.0.0.$swiface";
1460         my $server_ipv6 = sprintf("fd00:0000:0000:0000:0000:0000:5357:5f%02x", $swiface);
1461
1462         my $unix_name = ($ENV{USER} or $ENV{LOGNAME} or `PATH=/usr/ucb:$ENV{PATH} whoami`);
1463         chomp $unix_name;
1464         my $unix_uid = $>;
1465         my $unix_gids_str = $);
1466         my @unix_gids = split(" ", $unix_gids_str);
1467
1468         my $prefix_abs = abs_path($prefix);
1469         my $bindir_abs = abs_path($self->{bindir});
1470
1471         my @dirs = ();
1472
1473         my $shrdir="$prefix_abs/share";
1474         push(@dirs,$shrdir);
1475
1476         my $libdir="$prefix_abs/lib";
1477         push(@dirs,$libdir);
1478
1479         my $piddir="$prefix_abs/pid";
1480         push(@dirs,$piddir);
1481
1482         my $privatedir="$prefix_abs/private";
1483         push(@dirs,$privatedir);
1484
1485         my $binddnsdir = "$prefix_abs/bind-dns";
1486         push(@dirs, $binddnsdir);
1487
1488         my $lockdir="$prefix_abs/lockdir";
1489         push(@dirs,$lockdir);
1490
1491         my $eventlogdir="$prefix_abs/lockdir/eventlog";
1492         push(@dirs,$eventlogdir);
1493
1494         my $logdir="$prefix_abs/logs";
1495         push(@dirs,$logdir);
1496
1497         my $driver32dir="$shrdir/W32X86";
1498         push(@dirs,$driver32dir);
1499
1500         my $driver64dir="$shrdir/x64";
1501         push(@dirs,$driver64dir);
1502
1503         my $driver40dir="$shrdir/WIN40";
1504         push(@dirs,$driver40dir);
1505
1506         my $ro_shrdir="$shrdir/root-tmp";
1507         push(@dirs,$ro_shrdir);
1508
1509         my $msdfs_shrdir="$shrdir/msdfsshare";
1510         push(@dirs,$msdfs_shrdir);
1511
1512         my $msdfs_deeppath="$msdfs_shrdir/deeppath";
1513         push(@dirs,$msdfs_deeppath);
1514
1515         my $badnames_shrdir="$shrdir/badnames";
1516         push(@dirs,$badnames_shrdir);
1517
1518         my $lease1_shrdir="$shrdir/SMB2_10";
1519         push(@dirs,$lease1_shrdir);
1520
1521         my $lease2_shrdir="$shrdir/SMB3_00";
1522         push(@dirs,$lease2_shrdir);
1523
1524         my $manglenames_shrdir="$shrdir/manglenames";
1525         push(@dirs,$manglenames_shrdir);
1526
1527         my $widelinks_shrdir="$shrdir/widelinks";
1528         push(@dirs,$widelinks_shrdir);
1529
1530         my $widelinks_linkdir="$shrdir/widelinks_foo";
1531         push(@dirs,$widelinks_linkdir);
1532
1533         my $shadow_tstdir="$shrdir/shadow";
1534         push(@dirs,$shadow_tstdir);
1535         my $shadow_mntdir="$shadow_tstdir/mount";
1536         push(@dirs,$shadow_mntdir);
1537         my $shadow_basedir="$shadow_mntdir/base";
1538         push(@dirs,$shadow_basedir);
1539         my $shadow_shrdir="$shadow_basedir/share";
1540         push(@dirs,$shadow_shrdir);
1541
1542         my $nosymlinks_shrdir="$shrdir/nosymlinks";
1543         push(@dirs,$nosymlinks_shrdir);
1544
1545         my $local_symlinks_shrdir="$shrdir/local_symlinks";
1546         push(@dirs,$local_symlinks_shrdir);
1547
1548         # this gets autocreated by winbindd
1549         my $wbsockdir="$prefix_abs/winbindd";
1550
1551         my $nmbdsockdir="$prefix_abs/nmbd";
1552         unlink($nmbdsockdir);
1553
1554         ##
1555         ## create the test directory layout
1556         ##
1557         die ("prefix_abs = ''") if $prefix_abs eq "";
1558         die ("prefix_abs = '/'") if $prefix_abs eq "/";
1559
1560         mkdir($prefix_abs, 0777);
1561         print "CREATE TEST ENVIRONMENT IN '$prefix'...";
1562         if (not defined($no_delete_prefix) or not $no_delete_prefix) {
1563             system("rm -rf $prefix_abs/*");
1564         }
1565         mkdir($_, 0777) foreach(@dirs);
1566
1567         my $fs_specific_conf = $self->get_fs_specific_conf($shrdir);
1568
1569         ##
1570         ## lockdir and piddir must be 0755
1571         ##
1572         chmod 0755, $lockdir;
1573         chmod 0755, $piddir;
1574
1575
1576         ##
1577         ## create ro and msdfs share layout
1578         ##
1579
1580         chmod 0755, $ro_shrdir;
1581         my $unreadable_file = "$ro_shrdir/unreadable_file";
1582         unless (open(UNREADABLE_FILE, ">$unreadable_file")) {
1583                 warn("Unable to open $unreadable_file");
1584                 return undef;
1585         }
1586         close(UNREADABLE_FILE);
1587         chmod 0600, $unreadable_file;
1588
1589         my $msdfs_target = "$ro_shrdir/msdfs-target";
1590         unless (open(MSDFS_TARGET, ">$msdfs_target")) {
1591                 warn("Unable to open $msdfs_target");
1592                 return undef;
1593         }
1594         close(MSDFS_TARGET);
1595         chmod 0666, $msdfs_target;
1596         symlink "msdfs:$server_ip\\ro-tmp,$server_ipv6\\ro-tmp",
1597                 "$msdfs_shrdir/msdfs-src1";
1598         symlink "msdfs:$server_ipv6\\ro-tmp", "$msdfs_shrdir/deeppath/msdfs-src2";
1599
1600         ##
1601         ## create bad names in $badnames_shrdir
1602         ##
1603         ## (An invalid name, would be mangled to 8.3).
1604         my $badname_target = "$badnames_shrdir/\340|\231\216\377\177";
1605         unless (open(BADNAME_TARGET, ">$badname_target")) {
1606                 warn("Unable to open $badname_target");
1607                 return undef;
1608         }
1609         close(BADNAME_TARGET);
1610         chmod 0666, $badname_target;
1611
1612         ## (A bad name, would not be mangled to 8.3).
1613         my $badname_target = "$badnames_shrdir/\240\276\346\327\377\177";
1614         unless (open(BADNAME_TARGET, ">$badname_target")) {
1615                 warn("Unable to open $badname_target");
1616                 return undef;
1617         }
1618         close(BADNAME_TARGET);
1619         chmod 0666, $badname_target;
1620
1621         ## (A bad good name).
1622         my $badname_target = "$badnames_shrdir/blank.txt";
1623         unless (open(BADNAME_TARGET, ">$badname_target")) {
1624                 warn("Unable to open $badname_target");
1625                 return undef;
1626         }
1627         close(BADNAME_TARGET);
1628         chmod 0666, $badname_target;
1629
1630         ##
1631         ## create mangleable directory names in $manglenames_shrdir
1632         ##
1633         my $manglename_target = "$manglenames_shrdir/foo:bar";
1634         mkdir($manglename_target, 0777);
1635
1636         ##
1637         ## create symlinks for widelinks tests.
1638         ##
1639         my $widelinks_target = "$widelinks_linkdir/target";
1640         unless (open(WIDELINKS_TARGET, ">$widelinks_target")) {
1641                 warn("Unable to open $widelinks_target");
1642                 return undef;
1643         }
1644         close(WIDELINKS_TARGET);
1645         chmod 0666, $widelinks_target;
1646         ##
1647         ## This link should get ACCESS_DENIED
1648         ##
1649         symlink "$widelinks_target", "$widelinks_shrdir/source";
1650         ##
1651         ## This link should be allowed
1652         ##
1653         symlink "$widelinks_shrdir", "$widelinks_shrdir/dot";
1654
1655         my $conffile="$libdir/server.conf";
1656         my $dfqconffile="$libdir/dfq.conf";
1657         my $errorinjectconf="$libdir/error_inject.conf";
1658         my $delayinjectconf="$libdir/delay_inject.conf";
1659
1660         my $nss_wrapper_pl = "$ENV{PERL} $self->{srcdir}/third_party/nss_wrapper/nss_wrapper.pl";
1661         my $nss_wrapper_passwd = "$privatedir/passwd";
1662         my $nss_wrapper_group = "$privatedir/group";
1663         my $nss_wrapper_hosts = "$ENV{SELFTEST_PREFIX}/hosts";
1664         my $resolv_conf = "$privatedir/resolv.conf";
1665         my $dns_host_file = "$ENV{SELFTEST_PREFIX}/dns_host_file";
1666
1667         my $mod_printer_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/printing/modprinter.pl";
1668
1669         my $fake_snap_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/fake_snap.pl";
1670
1671         my @eventlog_list = ("dns server", "application");
1672
1673         ##
1674         ## calculate uids and gids
1675         ##
1676
1677         my ($max_uid, $max_gid);
1678         my ($uid_nobody, $uid_root, $uid_pdbtest, $uid_pdbtest2, $uid_userdup);
1679         my ($uid_pdbtest_wkn);
1680         my ($uid_smbget);
1681         my ($uid_force_user);
1682         my ($gid_nobody, $gid_nogroup, $gid_root, $gid_domusers, $gid_domadmins);
1683         my ($gid_userdup, $gid_everyone);
1684         my ($gid_force_user);
1685         my ($uid_user1);
1686         my ($uid_user2);
1687         my ($uid_gooduser);
1688         my ($uid_eviluser);
1689         my ($uid_slashuser);
1690
1691         if ($unix_uid < 0xffff - 13) {
1692                 $max_uid = 0xffff;
1693         } else {
1694                 $max_uid = $unix_uid;
1695         }
1696
1697         $uid_root = $max_uid - 1;
1698         $uid_nobody = $max_uid - 2;
1699         $uid_pdbtest = $max_uid - 3;
1700         $uid_pdbtest2 = $max_uid - 4;
1701         $uid_userdup = $max_uid - 5;
1702         $uid_pdbtest_wkn = $max_uid - 6;
1703         $uid_force_user = $max_uid - 7;
1704         $uid_smbget = $max_uid - 8;
1705         $uid_user1 = $max_uid - 9;
1706         $uid_user2 = $max_uid - 10;
1707         $uid_gooduser = $max_uid - 11;
1708         $uid_eviluser = $max_uid - 12;
1709         $uid_slashuser = $max_uid - 13;
1710
1711         if ($unix_gids[0] < 0xffff - 8) {
1712                 $max_gid = 0xffff;
1713         } else {
1714                 $max_gid = $unix_gids[0];
1715         }
1716
1717         $gid_nobody = $max_gid - 1;
1718         $gid_nogroup = $max_gid - 2;
1719         $gid_root = $max_gid - 3;
1720         $gid_domusers = $max_gid - 4;
1721         $gid_domadmins = $max_gid - 5;
1722         $gid_userdup = $max_gid - 6;
1723         $gid_everyone = $max_gid - 7;
1724         $gid_force_user = $max_gid - 8;
1725
1726         ##
1727         ## create conffile
1728         ##
1729
1730         unless (open(CONF, ">$conffile")) {
1731                 warn("Unable to open $conffile");
1732                 return undef;
1733         }
1734         print CONF "
1735 [global]
1736         netbios name = $server
1737         interfaces = $server_ip/8 $server_ipv6/64
1738         bind interfaces only = yes
1739         panic action = cd $self->{srcdir} && $self->{srcdir}/selftest/gdb_backtrace %d %\$(MAKE_TEST_BINARY)
1740         smbd:suicide mode = yes
1741
1742         workgroup = $domain
1743
1744         private dir = $privatedir
1745         binddns dir = $binddnsdir
1746         pid directory = $piddir
1747         lock directory = $lockdir
1748         log file = $logdir/log.\%m
1749         log level = 1
1750         debug pid = yes
1751         max log size = 0
1752
1753         state directory = $lockdir
1754         cache directory = $lockdir
1755
1756         passdb backend = tdbsam
1757
1758         time server = yes
1759
1760         add user script =               $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1761         add group script =              $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action add --name %g
1762         add machine script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1763         add user to group script =      $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action add --member %u --name %g --group_path $nss_wrapper_group
1764         delete user script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action delete --name %u
1765         delete group script =           $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action delete --name %g
1766         delete user from group script = $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action delete --member %u --name %g --group_path $nss_wrapper_group
1767
1768         addprinter command =            $mod_printer_pl -a -s $conffile --
1769         deleteprinter command =         $mod_printer_pl -d -s $conffile --
1770
1771         eventlog list = application \"dns server\"
1772
1773         kernel oplocks = no
1774         kernel change notify = no
1775
1776         logging = file
1777         printing = bsd
1778         printcap name = /dev/null
1779
1780         winbindd socket directory = $wbsockdir
1781         nmbd:socket dir = $nmbdsockdir
1782         idmap config * : range = 100000-200000
1783         winbind enum users = yes
1784         winbind enum groups = yes
1785         winbind separator = /
1786         include system krb5 conf = no
1787
1788 #       min receivefile size = 4000
1789
1790         read only = no
1791
1792         smbd:sharedelay = 100000
1793         smbd:writetimeupdatedelay = 500000
1794         map hidden = no
1795         map system = no
1796         map readonly = no
1797         store dos attributes = yes
1798         create mask = 755
1799         dos filemode = yes
1800         strict rename = yes
1801         strict sync = yes
1802         vfs objects = acl_xattr fake_acls xattr_tdb streams_depot time_audit full_audit
1803
1804         full_audit:syslog = no
1805         full_audit:success = none
1806         full_audit:failure = none
1807
1808         printing = vlp
1809         print command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb print %p %s
1810         lpq command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpq %p
1811         lp rm command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lprm %p %j
1812         lp pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lppause %p %j
1813         lp resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpresume %p %j
1814         queue pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queuepause %p
1815         queue resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queueresume %p
1816         lpq cache time = 0
1817         print notify backchannel = yes
1818
1819         ncalrpc dir = $prefix_abs/ncalrpc
1820
1821         # The samba3.blackbox.smbclient_s3 test uses this to test that
1822         # sending messages works, and that the %m sub works.
1823         message command = mv %s $shrdir/message.%m
1824
1825         # fsrvp server requires registry shares
1826         registry shares = yes
1827
1828         # Used by RPC SRVSVC tests
1829         add share command = $bindir_abs/smbaddshare
1830         change share command = $bindir_abs/smbchangeshare
1831         delete share command = $bindir_abs/smbdeleteshare
1832
1833         # fruit:copyfile is a global option
1834         fruit:copyfile = yes
1835
1836         #this does not mean that we use non-secure test env,
1837         #it just means we ALLOW one to be configured.
1838         allow insecure wide links = yes
1839
1840         # Begin extra options
1841         $extra_options
1842         # End extra options
1843
1844         #Include user defined custom parameters if set
1845 ";
1846
1847         if (defined($ENV{INCLUDE_CUSTOM_CONF})) {
1848                 print CONF "\t$ENV{INCLUDE_CUSTOM_CONF}\n";
1849         }
1850
1851         print CONF "
1852 [tmp]
1853         path = $shrdir
1854         comment = smb username is [%U]
1855 [tmpsort]
1856         path = $shrdir
1857         comment = Load dirsort module
1858         vfs objects = dirsort acl_xattr fake_acls xattr_tdb streams_depot
1859 [tmpenc]
1860         path = $shrdir
1861         comment = encrypt smb username is [%U]
1862         smb encrypt = required
1863         vfs objects = dirsort
1864 [tmpguest]
1865         path = $shrdir
1866         guest ok = yes
1867 [guestonly]
1868         path = $shrdir
1869         guest only = yes
1870         guest ok = yes
1871 [forceuser]
1872         path = $shrdir
1873         force user = $unix_name
1874         guest ok = yes
1875 [forceuser_unixonly]
1876         comment = force a user with unix user SID and group SID
1877         path = $shrdir
1878         force user = pdbtest
1879         guest ok = yes
1880 [forceuser_wkngroup]
1881         comment = force a user with well-known group SID
1882         path = $shrdir
1883         force user = pdbtest_wkn
1884         guest ok = yes
1885 [forcegroup]
1886         path = $shrdir
1887         force group = nogroup
1888         guest ok = yes
1889 [ro-tmp]
1890         path = $ro_shrdir
1891         guest ok = yes
1892 [write-list-tmp]
1893         path = $shrdir
1894         read only = yes
1895         write list = $unix_name
1896 [valid-users-tmp]
1897         path = $shrdir
1898         valid users = $unix_name
1899         access based share enum = yes
1900 [msdfs-share]
1901         path = $msdfs_shrdir
1902         msdfs root = yes
1903         msdfs shuffle referrals = yes
1904         guest ok = yes
1905 [hideunread]
1906         copy = tmp
1907         hide unreadable = yes
1908 [tmpcase]
1909         copy = tmp
1910         case sensitive = yes
1911 [hideunwrite]
1912         copy = tmp
1913         hide unwriteable files = yes
1914 [durable]
1915         copy = tmp
1916         kernel share modes = no
1917         kernel oplocks = no
1918         posix locking = no
1919 [fs_specific]
1920         copy = tmp
1921         $fs_specific_conf
1922 [print1]
1923         copy = tmp
1924         printable = yes
1925
1926 [print2]
1927         copy = print1
1928 [print3]
1929         copy = print1
1930         default devmode = no
1931 [lp]
1932         copy = print1
1933
1934 [nfs4acl_simple_40]
1935         path = $shrdir
1936         comment = smb username is [%U]
1937         nfs4:mode = simple
1938         nfs4acl_xattr:version = 40
1939         vfs objects = nfs4acl_xattr xattr_tdb
1940
1941 [nfs4acl_special_40]
1942         path = $shrdir
1943         comment = smb username is [%U]
1944         nfs4:mode = special
1945         nfs4acl_xattr:version = 40
1946         vfs objects = nfs4acl_xattr xattr_tdb
1947
1948 [nfs4acl_simple_41]
1949         path = $shrdir
1950         comment = smb username is [%U]
1951         nfs4:mode = simple
1952         vfs objects = nfs4acl_xattr xattr_tdb
1953
1954 [nfs4acl_xdr_40]
1955         path = $shrdir
1956         comment = smb username is [%U]
1957         vfs objects = nfs4acl_xattr xattr_tdb
1958         nfs4:mode = simple
1959         nfs4acl_xattr:encoding = xdr
1960         nfs4acl_xattr:version = 40
1961
1962 [nfs4acl_xdr_41]
1963         path = $shrdir
1964         comment = smb username is [%U]
1965         vfs objects = nfs4acl_xattr xattr_tdb
1966         nfs4:mode = simple
1967         nfs4acl_xattr:encoding = xdr
1968         nfs4acl_xattr:version = 41
1969
1970 [xcopy_share]
1971         path = $shrdir
1972         comment = smb username is [%U]
1973         create mask = 777
1974         force create mode = 777
1975 [posix_share]
1976         path = $shrdir
1977         comment = smb username is [%U]
1978         create mask = 0777
1979         force create mode = 0
1980         directory mask = 0777
1981         force directory mode = 0
1982         vfs objects = xattr_tdb streams_depot
1983 [aio]
1984         copy = tmp
1985         aio read size = 1
1986         aio write size = 1
1987
1988 [print\$]
1989         copy = tmp
1990
1991 [vfs_fruit]
1992         path = $shrdir
1993         vfs objects = catia fruit streams_xattr acl_xattr xattr_tdb
1994         fruit:resource = file
1995         fruit:metadata = netatalk
1996         fruit:locking = netatalk
1997         fruit:encoding = native
1998         fruit:veto_appledouble = no
1999
2000 [vfs_fruit_xattr]
2001         path = $shrdir
2002         # This is used by vfs.fruit tests that require real fs xattr
2003         vfs objects = catia fruit streams_xattr acl_xattr
2004         fruit:resource = file
2005         fruit:metadata = netatalk
2006         fruit:locking = netatalk
2007         fruit:encoding = native
2008         fruit:veto_appledouble = no
2009
2010 [vfs_fruit_metadata_stream]
2011         path = $shrdir
2012         vfs objects = fruit streams_xattr acl_xattr xattr_tdb
2013         fruit:resource = file
2014         fruit:metadata = stream
2015         fruit:veto_appledouble = no
2016
2017 [vfs_fruit_stream_depot]
2018         path = $shrdir
2019         vfs objects = fruit streams_depot acl_xattr xattr_tdb
2020         fruit:resource = stream
2021         fruit:metadata = stream
2022         fruit:veto_appledouble = no
2023
2024 [vfs_wo_fruit]
2025         path = $shrdir
2026         vfs objects = streams_xattr acl_xattr xattr_tdb
2027
2028 [vfs_wo_fruit_stream_depot]
2029         path = $shrdir
2030         vfs objects = streams_depot acl_xattr xattr_tdb
2031
2032 [vfs_fruit_timemachine]
2033         path = $shrdir
2034         vfs objects = fruit streams_xattr acl_xattr xattr_tdb
2035         fruit:resource = file
2036         fruit:metadata = stream
2037         fruit:time machine = yes
2038         fruit:time machine max size = 32K
2039
2040 [vfs_fruit_wipe_intentionally_left_blank_rfork]
2041         path = $shrdir
2042         vfs objects = fruit streams_xattr acl_xattr xattr_tdb
2043         fruit:resource = file
2044         fruit:metadata = stream
2045         fruit:wipe_intentionally_left_blank_rfork = true
2046         fruit:delete_empty_adfiles = false
2047         fruit:veto_appledouble = no
2048
2049 [vfs_fruit_delete_empty_adfiles]
2050         path = $shrdir
2051         vfs objects = fruit streams_xattr acl_xattr xattr_tdb
2052         fruit:resource = file
2053         fruit:metadata = stream
2054         fruit:wipe_intentionally_left_blank_rfork = true
2055         fruit:delete_empty_adfiles = true
2056         fruit:veto_appledouble = no
2057
2058 [badname-tmp]
2059         path = $badnames_shrdir
2060         guest ok = yes
2061
2062 [manglenames_share]
2063         path = $manglenames_shrdir
2064         guest ok = yes
2065
2066 [dynamic_share]
2067         path = $shrdir/%R
2068         guest ok = yes
2069
2070 [widelinks_share]
2071         path = $widelinks_shrdir
2072         wide links = no
2073         guest ok = yes
2074
2075 [fsrvp_share]
2076         path = $shrdir
2077         comment = fake shapshots using rsync
2078         vfs objects = shell_snap shadow_copy2
2079         shell_snap:check path command = $fake_snap_pl --check
2080         shell_snap:create command = $fake_snap_pl --create
2081         shell_snap:delete command = $fake_snap_pl --delete
2082         # a relative path here fails, the snapshot dir is no longer found
2083         shadow:snapdir = $shrdir/.snapshots
2084
2085 [shadow1]
2086         path = $shadow_shrdir
2087         comment = previous versions snapshots under mount point
2088         vfs objects = shadow_copy2
2089         shadow:mountpoint = $shadow_mntdir
2090
2091 [shadow2]
2092         path = $shadow_shrdir
2093         comment = previous versions snapshots outside mount point
2094         vfs objects = shadow_copy2
2095         shadow:mountpoint = $shadow_mntdir
2096         shadow:snapdir = $shadow_tstdir/.snapshots
2097
2098 [shadow3]
2099         path = $shadow_shrdir
2100         comment = previous versions with subvolume snapshots, snapshots under base dir
2101         vfs objects = shadow_copy2
2102         shadow:mountpoint = $shadow_mntdir
2103         shadow:basedir = $shadow_basedir
2104         shadow:snapdir = $shadow_basedir/.snapshots
2105
2106 [shadow4]
2107         path = $shadow_shrdir
2108         comment = previous versions with subvolume snapshots, snapshots outside mount point
2109         vfs objects = shadow_copy2
2110         shadow:mountpoint = $shadow_mntdir
2111         shadow:basedir = $shadow_basedir
2112         shadow:snapdir = $shadow_tstdir/.snapshots
2113
2114 [shadow5]
2115         path = $shadow_shrdir
2116         comment = previous versions at volume root snapshots under mount point
2117         vfs objects = shadow_copy2
2118         shadow:mountpoint = $shadow_shrdir
2119
2120 [shadow6]
2121         path = $shadow_shrdir
2122         comment = previous versions at volume root snapshots outside mount point
2123         vfs objects = shadow_copy2
2124         shadow:mountpoint = $shadow_shrdir
2125         shadow:snapdir = $shadow_tstdir/.snapshots
2126
2127 [shadow7]
2128         path = $shadow_shrdir
2129         comment = previous versions snapshots everywhere
2130         vfs objects = shadow_copy2
2131         shadow:mountpoint = $shadow_mntdir
2132         shadow:snapdirseverywhere = yes
2133
2134 [shadow8]
2135         path = $shadow_shrdir
2136         comment = previous versions using snapsharepath
2137         vfs objects = shadow_copy2
2138         shadow:mountpoint = $shadow_mntdir
2139         shadow:snapdir = $shadow_tstdir/.snapshots
2140         shadow:snapsharepath = share
2141
2142 [shadow_fmt0]
2143         comment = Testing shadow:format with default option
2144         vfs object = shadow_copy2
2145         path = $shadow_shrdir
2146         read only = no
2147         guest ok = yes
2148         shadow:mountpoint = $shadow_mntdir
2149         shadow:basedir = $shadow_basedir
2150         shadow:snapdir = $shadow_basedir/.snapshots
2151         shadow:format = \@GMT-%Y.%m.%d-%H.%M.%S
2152
2153 [shadow_fmt1]
2154         comment = Testing shadow:format with only date component
2155         vfs object = shadow_copy2
2156         path = $shadow_shrdir
2157         read only = no
2158         guest ok = yes
2159         shadow:mountpoint = $shadow_mntdir
2160         shadow:basedir = $shadow_basedir
2161         shadow:snapdir = $shadow_basedir/.snapshots
2162         shadow:format = \@GMT-%Y-%m-%d
2163
2164 [shadow_fmt2]
2165         comment = Testing shadow:format with some hardcoded prefix
2166         vfs object = shadow_copy2
2167         path = $shadow_shrdir
2168         read only = no
2169         guest ok = yes
2170         shadow:mountpoint = $shadow_mntdir
2171         shadow:basedir = $shadow_basedir
2172         shadow:snapdir = $shadow_basedir/.snapshots
2173         shadow:format = snap\@GMT-%Y.%m.%d-%H.%M.%S
2174
2175 [shadow_fmt3]
2176         comment = Testing shadow:format with modified format
2177         vfs object = shadow_copy2
2178         path = $shadow_shrdir
2179         read only = no
2180         guest ok = yes
2181         shadow:mountpoint = $shadow_mntdir
2182         shadow:basedir = $shadow_basedir
2183         shadow:snapdir = $shadow_basedir/.snapshots
2184         shadow:format = \@GMT-%Y.%m.%d-%H_%M_%S-snap
2185
2186 [shadow_fmt4]
2187         comment = Testing shadow:snapprefix regex
2188         vfs object = shadow_copy2
2189         path = $shadow_shrdir
2190         read only = no
2191         guest ok = yes
2192         shadow:mountpoint = $shadow_mntdir
2193         shadow:basedir = $shadow_basedir
2194         shadow:snapdir = $shadow_basedir/.snapshots
2195         shadow:snapprefix = \^s[a-z]*p\$
2196         shadow:format = _GMT-%Y.%m.%d-%H.%M.%S
2197
2198 [shadow_fmt5]
2199         comment = Testing shadow:snapprefix with delim regex
2200         vfs object = shadow_copy2
2201         path = $shadow_shrdir
2202         read only = no
2203         guest ok = yes
2204         shadow:mountpoint = $shadow_mntdir
2205         shadow:basedir = $shadow_basedir
2206         shadow:snapdir = $shadow_basedir/.snapshots
2207         shadow:delimiter = \@GMT
2208         shadow:snapprefix = [a-z]*
2209         shadow:format = \@GMT-%Y.%m.%d-%H.%M.%S
2210
2211 [shadow_wl]
2212         path = $shadow_shrdir
2213         comment = previous versions with wide links allowed
2214         vfs objects = shadow_copy2
2215         shadow:mountpoint = $shadow_mntdir
2216         wide links = yes
2217
2218 [shadow_write]
2219         path = $shadow_tstdir
2220         comment = previous versions snapshots under mount point
2221         vfs objects = shadow_copy2 streams_xattr error_inject
2222         aio write size = 0
2223         error_inject:pwrite = EBADF
2224         shadow:mountpoint = $shadow_tstdir
2225
2226 [dfq]
2227         path = $shrdir/dfree
2228         vfs objects = acl_xattr fake_acls xattr_tdb fake_dfq
2229         admin users = $unix_name
2230         include = $dfqconffile
2231 [dfq_cache]
2232         path = $shrdir/dfree
2233         vfs objects = acl_xattr fake_acls xattr_tdb fake_dfq
2234         admin users = $unix_name
2235         include = $dfqconffile
2236         dfree cache time = 60
2237 [dfq_owner]
2238         path = $shrdir/dfree
2239         vfs objects = acl_xattr fake_acls xattr_tdb fake_dfq
2240         inherit owner = yes
2241         include = $dfqconffile
2242 [quotadir]
2243         path = $shrdir/quota
2244         admin users = $unix_name
2245
2246 [acl_xattr_ign_sysacl_posix]
2247         copy = tmp
2248         acl_xattr:ignore system acls = yes
2249         acl_xattr:default acl style = posix
2250 [acl_xattr_ign_sysacl_windows]
2251         copy = tmp
2252         acl_xattr:ignore system acls = yes
2253         acl_xattr:default acl style = windows
2254
2255 [mangle_illegal]
2256         copy = tmp
2257         mangled names = illegal
2258
2259 [nosymlinks]
2260         copy = tmp
2261         path = $nosymlinks_shrdir
2262         follow symlinks = no
2263
2264 [local_symlinks]
2265         copy = tmp
2266         path = $local_symlinks_shrdir
2267         follow symlinks = yes
2268
2269 [kernel_oplocks]
2270         copy = tmp
2271         kernel oplocks = yes
2272         vfs objects = streams_xattr xattr_tdb
2273
2274 [streams_xattr]
2275         copy = tmp
2276         vfs objects = streams_xattr xattr_tdb
2277
2278 [compound_find]
2279         copy = tmp
2280         smbd:find async delay usec = 10000
2281 [error_inject]
2282         copy = tmp
2283         vfs objects = error_inject
2284         include = $errorinjectconf
2285
2286 [delay_inject]
2287         copy = tmp
2288         vfs objects = delay_inject
2289         kernel share modes = no
2290         kernel oplocks = no
2291         posix locking = no
2292         include = $delayinjectconf
2293
2294 [aio_delay_inject]
2295         copy = tmp
2296         vfs objects = delay_inject
2297         delay_inject:pread_send = 2000
2298         delay_inject:pwrite_send = 2000
2299
2300 [delete_readonly]
2301         path = $prefix_abs/share
2302         delete readonly = yes
2303         ";
2304         close(CONF);
2305
2306         my $net = Samba::bindir_path($self, "net");
2307         my $cmd = "";
2308         $cmd .= "SMB_CONF_PATH=\"$conffile\" ";
2309         $cmd .= "$net setlocalsid $samsid";
2310
2311         if (system($cmd) != 0) {
2312             warn("Join failed\n$cmd");
2313             return undef;
2314         }
2315
2316         unless (open(ERRORCONF, ">$errorinjectconf")) {
2317                 warn("Unable to open $errorinjectconf");
2318                 return undef;
2319         }
2320         close(ERRORCONF);
2321
2322         unless (open(DELAYCONF, ">$delayinjectconf")) {
2323                 warn("Unable to open $delayinjectconf");
2324                 return undef;
2325         }
2326         close(DELAYCONF);
2327
2328         unless (open(DFQCONF, ">$dfqconffile")) {
2329                 warn("Unable to open $dfqconffile");
2330                 return undef;
2331         }
2332         close(DFQCONF);
2333
2334         ##
2335         ## create a test account
2336         ##
2337
2338         unless (open(PASSWD, ">$nss_wrapper_passwd")) {
2339            warn("Unable to open $nss_wrapper_passwd");
2340            return undef;
2341         }
2342         print PASSWD "nobody:x:$uid_nobody:$gid_nobody:nobody gecos:$prefix_abs:/bin/false
2343 $unix_name:x:$unix_uid:$unix_gids[0]:$unix_name gecos:$prefix_abs:/bin/false
2344 pdbtest:x:$uid_pdbtest:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
2345 pdbtest2:x:$uid_pdbtest2:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
2346 userdup:x:$uid_userdup:$gid_userdup:userdup gecos:$prefix_abs:/bin/false
2347 pdbtest_wkn:x:$uid_pdbtest_wkn:$gid_everyone:pdbtest_wkn gecos:$prefix_abs:/bin/false
2348 force_user:x:$uid_force_user:$gid_force_user:force user gecos:$prefix_abs:/bin/false
2349 smbget_user:x:$uid_smbget:$gid_domusers:smbget_user gecos:$prefix_abs:/bin/false
2350 user1:x:$uid_user1:$gid_nogroup:user1 gecos:$prefix_abs:/bin/false
2351 user2:x:$uid_user2:$gid_nogroup:user2 gecos:$prefix_abs:/bin/false
2352 gooduser:x:$uid_gooduser:$gid_domusers:gooduser gecos:$prefix_abs:/bin/false
2353 eviluser:x:$uid_eviluser:$gid_domusers:eviluser gecos::/bin/false
2354 slashuser:x:$uid_slashuser:$gid_domusers:slashuser gecos:/:/bin/false
2355 ";
2356         if ($unix_uid != 0) {
2357                 print PASSWD "root:x:$uid_root:$gid_root:root gecos:$prefix_abs:/bin/false
2358 ";
2359         }
2360         close(PASSWD);
2361
2362         unless (open(GROUP, ">$nss_wrapper_group")) {
2363              warn("Unable to open $nss_wrapper_group");
2364              return undef;
2365         }
2366         print GROUP "nobody:x:$gid_nobody:
2367 nogroup:x:$gid_nogroup:nobody
2368 $unix_name-group:x:$unix_gids[0]:
2369 domusers:X:$gid_domusers:
2370 domadmins:X:$gid_domadmins:
2371 userdup:x:$gid_userdup:$unix_name
2372 everyone:x:$gid_everyone:
2373 force_user:x:$gid_force_user:
2374 ";
2375         if ($unix_gids[0] != 0) {
2376                 print GROUP "root:x:$gid_root:
2377 ";
2378         }
2379
2380         close(GROUP);
2381
2382         ## hosts
2383         my $hostname = lc($server);
2384         unless (open(HOSTS, ">>$nss_wrapper_hosts")) {
2385                 warn("Unable to open $nss_wrapper_hosts");
2386                 return undef;
2387         }
2388         print HOSTS "${server_ip} ${hostname}.samba.example.com ${hostname}\n";
2389         print HOSTS "${server_ipv6} ${hostname}.samba.example.com ${hostname}\n";
2390         close(HOSTS);
2391
2392         ## hosts
2393         unless (open(RESOLV_CONF, ">$resolv_conf")) {
2394                 warn("Unable to open $resolv_conf");
2395                 return undef;
2396         }
2397         if (defined($dc_server_ip) or defined($dc_server_ipv6)) {
2398                 if (defined($dc_server_ip)) {
2399                         print RESOLV_CONF "nameserver $dc_server_ip\n";
2400                 }
2401                 if (defined($dc_server_ipv6)) {
2402                         print RESOLV_CONF "nameserver $dc_server_ipv6\n";
2403                 }
2404         } else {
2405                 print RESOLV_CONF "nameserver ${server_ip}\n";
2406                 print RESOLV_CONF "nameserver ${server_ipv6}\n";
2407         }
2408         close(RESOLV_CONF);
2409
2410         foreach my $evlog (@eventlog_list) {
2411                 my $evlogtdb = "$eventlogdir/$evlog.tdb";
2412                 open(EVENTLOG, ">$evlogtdb") or die("Unable to open $evlogtdb");
2413                 close(EVENTLOG);
2414         }
2415
2416         $createuser_env{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
2417         $createuser_env{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
2418         $createuser_env{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
2419         $createuser_env{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
2420         if ($ENV{SAMBA_DNS_FAKING}) {
2421                 $createuser_env{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
2422         } else {
2423                 $createuser_env{RESOLV_WRAPPER_CONF} = $resolv_conf;
2424         }
2425
2426         createuser($self, $unix_name, $password, $conffile, \%createuser_env) || die("Unable to create user");
2427         createuser($self, "force_user", $password, $conffile, \%createuser_env) || die("Unable to create force_user");
2428         createuser($self, "smbget_user", $password, $conffile, \%createuser_env) || die("Unable to create smbget_user");
2429         createuser($self, "user1", $password, $conffile, \%createuser_env) || die("Unable to create user1");
2430         createuser($self, "user2", $password, $conffile, \%createuser_env) || die("Unable to create user2");
2431         createuser($self, "gooduser", $password, $conffile, \%createuser_env) || die("Unable to create gooduser");
2432         createuser($self, "eviluser", $password, $conffile, \%createuser_env) || die("Unable to create eviluser");
2433         createuser($self, "slashuser", $password, $conffile, \%createuser_env) || die("Unable to create slashuser");
2434
2435         open(DNS_UPDATE_LIST, ">$prefix/dns_update_list") or die("Unable to open $$prefix/dns_update_list");
2436         print DNS_UPDATE_LIST "A $server. $server_ip\n";
2437         print DNS_UPDATE_LIST "AAAA $server. $server_ipv6\n";
2438         close(DNS_UPDATE_LIST);
2439
2440         print "DONE\n";
2441
2442         $ret{SERVER_IP} = $server_ip;
2443         $ret{SERVER_IPV6} = $server_ipv6;
2444         $ret{NMBD_TEST_LOG} = "$prefix/nmbd_test.log";
2445         $ret{NMBD_TEST_LOG_POS} = 0;
2446         $ret{WINBINDD_TEST_LOG} = "$prefix/winbindd_test.log";
2447         $ret{WINBINDD_TEST_LOG_POS} = 0;
2448         $ret{SMBD_TEST_LOG} = "$prefix/smbd_test.log";
2449         $ret{SMBD_TEST_LOG_POS} = 0;
2450         $ret{SERVERCONFFILE} = $conffile;
2451         $ret{CONFIGURATION} ="-s $conffile";
2452         $ret{LOCK_DIR} = $lockdir;
2453         $ret{SERVER} = $server;
2454         $ret{USERNAME} = $unix_name;
2455         $ret{USERID} = $unix_uid;
2456         $ret{DOMAIN} = $domain;
2457         $ret{SAMSID} = $samsid;
2458         $ret{NETBIOSNAME} = $server;
2459         $ret{PASSWORD} = $password;
2460         $ret{PIDDIR} = $piddir;
2461         $ret{SELFTEST_WINBINDD_SOCKET_DIR} = $wbsockdir;
2462         $ret{NMBD_SOCKET_DIR} = $nmbdsockdir;
2463         $ret{SOCKET_WRAPPER_DEFAULT_IFACE} = $swiface;
2464         $ret{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
2465         $ret{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
2466         $ret{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
2467         $ret{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
2468         $ret{NSS_WRAPPER_MODULE_SO_PATH} = Samba::nss_wrapper_winbind_so_path($self);
2469         $ret{NSS_WRAPPER_MODULE_FN_PREFIX} = "winbind";
2470         if ($ENV{SAMBA_DNS_FAKING}) {
2471                 $ret{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
2472         } else {
2473                 $ret{RESOLV_WRAPPER_CONF} = $resolv_conf;
2474         }
2475         $ret{LOCAL_PATH} = "$shrdir";
2476         $ret{LOGDIR} = $logdir;
2477
2478         #
2479         # Avoid hitting system krb5.conf -
2480         # An env that needs Kerberos will reset this to the real
2481         # value.
2482         #
2483         $ret{KRB5_CONFIG} = abs_path($prefix) . "/no_krb5.conf";
2484
2485         # Define KRB5CCNAME for each environment we set up
2486         $ret{KRB5_CCACHE} = abs_path($prefix) . "/krb5ccache";
2487         $ENV{KRB5CCNAME} = $ret{KRB5_CCACHE};
2488
2489         return \%ret;
2490 }
2491
2492 sub wait_for_start($$$$$)
2493 {
2494         my ($self, $envvars, $nmbd, $winbindd, $smbd) = @_;
2495         my $cmd;
2496         my $netcmd;
2497         my $ret;
2498
2499         if ($nmbd eq "yes") {
2500                 my $count = 0;
2501
2502                 # give time for nbt server to register its names
2503                 print "checking for nmbd\n";
2504
2505                 # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
2506                 my $nmblookup = Samba::bindir_path($self, "nmblookup");
2507
2508                 do {
2509                         $ret = system("$nmblookup $envvars->{CONFIGURATION} $envvars->{SERVER}");
2510                         if ($ret != 0) {
2511                                 sleep(1);
2512                         } else {
2513                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
2514                                 system("$nmblookup $envvars->{CONFIGURATION} __SAMBA__");
2515                                 system("$nmblookup $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
2516                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
2517                         }
2518                         $count++;
2519                 } while ($ret != 0 && $count < 10);
2520                 if ($count == 10) {
2521                         print "NMBD not reachable after 10 retries\n";
2522                         teardown_env($self, $envvars);
2523                         return 0;
2524                 }
2525         }
2526
2527         if ($winbindd eq "yes") {
2528             print "checking for winbindd\n";
2529             my $count = 0;
2530             $cmd = "SELFTEST_WINBINDD_SOCKET_DIR='$envvars->{SELFTEST_WINBINDD_SOCKET_DIR}' ";
2531             $cmd .= "NSS_WRAPPER_PASSWD='$envvars->{NSS_WRAPPER_PASSWD}' ";
2532             $cmd .= "NSS_WRAPPER_GROUP='$envvars->{NSS_WRAPPER_GROUP}' ";
2533             $cmd .= Samba::bindir_path($self, "wbinfo") . " --ping-dc";
2534
2535             do {
2536                 if ($ret != 0) {
2537                     $ret = system($cmd);
2538                     sleep(1);
2539                 }
2540                 $count++;
2541             } while ($ret != 0 && $count < 20);
2542             if ($count == 20) {
2543                 print "WINBINDD not reachable after 20 seconds\n";
2544                 teardown_env($self, $envvars);
2545                 return 0;
2546             }
2547         }
2548
2549         if ($smbd eq "yes") {
2550             # make sure smbd is also up set
2551             print "wait for smbd\n";
2552
2553             my $count = 0;
2554             do {
2555                 $ret = system(Samba::bindir_path($self, "smbclient") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
2556                 if ($ret != 0) {
2557                     sleep(1);
2558                 }
2559                 $count++
2560             } while ($ret != 0 && $count < 20);
2561             if ($count == 20) {
2562                 print "SMBD failed to start up in a reasonable time (20sec)\n";
2563                 teardown_env($self, $envvars);
2564                 return 0;
2565             }
2566         }
2567
2568         # Ensure we have domain users mapped.
2569         $netcmd = "NSS_WRAPPER_PASSWD='$envvars->{NSS_WRAPPER_PASSWD}' ";
2570         $netcmd .= "NSS_WRAPPER_GROUP='$envvars->{NSS_WRAPPER_GROUP}' ";
2571         $netcmd .= Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} ";
2572
2573         $cmd = $netcmd . "groupmap delete ntgroup=domusers";
2574         $ret = system($cmd);
2575
2576         $cmd = $netcmd . "groupmap add rid=513 unixgroup=domusers type=domain";
2577         $ret = system($cmd);
2578         if ($ret != 0) {
2579                 print("\"$cmd\" failed\n");
2580                 return 1;
2581         }
2582
2583         $cmd = $netcmd . "groupmap delete ntgroup=domadmins";
2584         $ret = system($cmd);
2585
2586         $cmd = $netcmd . "groupmap add rid=512 unixgroup=domadmins type=domain";
2587         $ret = system($cmd);
2588         if ($ret != 0) {
2589                 print("\"$cmd\" failed\n");
2590                 return 1;
2591         }
2592
2593         $cmd = $netcmd . "groupmap delete ntgroup=everyone";
2594         $ret = system($cmd);
2595
2596         $cmd = $netcmd . "groupmap add sid=S-1-1-0 unixgroup=everyone type=builtin";
2597         $ret = system($cmd);
2598         if ($ret != 0) {
2599                 print("\"$cmd\" failed\n");
2600                 return 1;
2601         }
2602
2603         # note: creating builtin groups requires winbindd for the
2604         # unix id allocator
2605         my $create_builtin_users = "no";
2606         if ($winbindd eq "yes") {
2607                 $cmd = "SELFTEST_WINBINDD_SOCKET_DIR='$envvars->{SELFTEST_WINBINDD_SOCKET_DIR}' ";
2608                 $cmd .= "NSS_WRAPPER_PASSWD='$envvars->{NSS_WRAPPER_PASSWD}' ";
2609                 $cmd .= "NSS_WRAPPER_GROUP='$envvars->{NSS_WRAPPER_GROUP}' ";
2610                 $cmd .= Samba::bindir_path($self, "wbinfo") . " --sid-to-gid=S-1-5-32-545";
2611                 my $wbinfo_out = qx($cmd 2>&1);
2612                 if ($? != 0) {
2613                         # wbinfo doesn't give us a better error code then
2614                         # WBC_ERR_DOMAIN_NOT_FOUND, but at least that's
2615                         # different then WBC_ERR_WINBIND_NOT_AVAILABLE
2616                         if ($wbinfo_out !~ /WBC_ERR_DOMAIN_NOT_FOUND/) {
2617                                 print("Failed to run \"wbinfo --sid-to-gid=S-1-5-32-545\": $wbinfo_out");
2618                                 teardown_env($self, $envvars);
2619                                 return 0;
2620                         }
2621                         $create_builtin_users = "yes";
2622                 }
2623         }
2624         if ($create_builtin_users eq "yes") {
2625             $cmd = "SELFTEST_WINBINDD_SOCKET_DIR='$envvars->{SELFTEST_WINBINDD_SOCKET_DIR}' ";
2626             $cmd .= "NSS_WRAPPER_PASSWD='$envvars->{NSS_WRAPPER_PASSWD}' ";
2627             $cmd .= "NSS_WRAPPER_GROUP='$envvars->{NSS_WRAPPER_GROUP}' ";
2628             $cmd .= Samba::bindir_path($self, "net") . " $envvars->{CONFIGURATION} ";
2629             $cmd .= "sam createbuiltingroup Users";
2630             $ret = system($cmd);
2631             if ($ret != 0) {
2632                 print "Failed to create BUILTIN\\Users group\n";
2633                 teardown_env($self, $envvars);
2634                 return 0;
2635             }
2636
2637             $cmd = Samba::bindir_path($self, "net") . " $envvars->{CONFIGURATION} ";
2638             $cmd .= "cache del IDMAP/SID2XID/S-1-5-32-545";
2639             system($cmd);
2640
2641             $cmd = "SELFTEST_WINBINDD_SOCKET_DIR='$envvars->{SELFTEST_WINBINDD_SOCKET_DIR}' ";
2642             $cmd .= "NSS_WRAPPER_PASSWD='$envvars->{NSS_WRAPPER_PASSWD}' ";
2643             $cmd .= "NSS_WRAPPER_GROUP='$envvars->{NSS_WRAPPER_GROUP}' ";
2644             $cmd .= Samba::bindir_path($self, "wbinfo") . " --sid-to-gid=S-1-5-32-545";
2645             $ret = system($cmd);
2646             if ($ret != 0) {
2647                 print "Missing \"BUILTIN\\Users\", did net sam createbuiltingroup Users fail?\n";
2648                 teardown_env($self, $envvars);
2649                 return 0;
2650             }
2651         }
2652
2653         print $self->getlog_env($envvars);
2654
2655         return 1;
2656 }
2657
2658 1;