source/Makefile.in

   1 #########################################################################
   2 # Makefile.in for Samba - rewritten for autoconf support
   3 # Copyright Andrew Tridgell 1992-1998
   4 # Copyright (C) 2001 by Martin Pool <mbp@samba.org>
   5 # Copyright Andrew Barteltt 2002
   6 # Copyright (C) 2003 Anthony Liguori <aliguor@us.ibm.com>
   7 ###########################################################################
   8
   9 prefix=@prefix@
  10 exec_prefix=@exec_prefix@
  11 mandir=@mandir@
  12
  13 LIBS=@LIBS@
  14 CC=@CC@
  15 SHLD=@SHLD@
  16 CFLAGS=@CFLAGS@
  17 CPPFLAGS=@CPPFLAGS@
  18 EXEEXT=@EXEEXT@
  19 LDFLAGS=@LDFLAGS@
  20 LDSHFLAGS=@LDSHFLAGS@ @LDFLAGS@ @CFLAGS@
  21 AWK=@AWK@
  22 DYNEXP=@DYNEXP@
  23 PYTHON=@PYTHON@
  24
  25 TERMLDFLAGS=@TERMLDFLAGS@
  26 TERMLIBS=@TERMLIBS@
  27 PRINTLIBS=@PRINTLIBS@
  28 AUTHLIBS=@AUTHLIBS@
  29
  30 LINK=$(CC) $(FLAGS) $(LDFLAGS)
  31
  32 INSTALLCMD=@INSTALL@
  33 INSTALLCLIENTCMD_SH=@INSTALLCLIENTCMD_SH@
  34 INSTALLCLIENTCMD_A=@INSTALLCLIENTCMD_A@
  35
  36 VPATH=@srcdir@
  37 srcdir=@srcdir@
  38 builddir=@builddir@
  39 SHELL=/bin/sh
  40
  41 # XXX: Perhaps this should be @SHELL@ instead -- apparently autoconf
  42 # will search for a POSIX-compliant shell, and that might not be
  43 # /bin/sh on some platforms.  I guess it's not a big problem -- mbp
  44
  45 # See the autoconf manual "Installation Directory Variables" for a
  46 # discussion of thesubtle use of these variables.
  47
  48 BASEDIR= @prefix@
  49 BINDIR = @bindir@
  50 # sbindir is mapped to bindir when compiling SAMBA in 2.0.x compatibility mode.
  51 SBINDIR = @sbindir@
  52 LIBDIR = @libdir@
  53 VFSLIBDIR = $(LIBDIR)/vfs
  54 PDBLIBDIR = $(LIBDIR)/pdb
  55 RPCLIBDIR = $(LIBDIR)/rpc
  56 CONFIGDIR = @configdir@
  57 VARDIR = @localstatedir@
  58 MANDIR = @mandir@
  59
  60 # The permissions to give the executables
  61 INSTALLPERMS = 0755
  62
  63 # set these to where to find various files
  64 # These can be overridden by command line switches (see smbd(8))
  65 # or in smb.conf (see smb.conf(5))
  66 LOGFILEBASE = @logfilebase@
  67 CONFIGFILE = $(CONFIGDIR)/smb.conf
  68 LMHOSTSFILE = $(CONFIGDIR)/lmhosts
  69
  70 # This is where smbpasswd et al go
  71 PRIVATEDIR = @privatedir@
  72
  73 SMB_PASSWD_FILE = $(PRIVATEDIR)/smbpasswd
  74 PRIVATE_DIR = $(PRIVATEDIR)
  75
  76 # This is where SWAT images and help files go
  77 SWATDIR = @swatdir@
  78
  79 # the directory where lock files go
  80 LOCKDIR = @lockdir@
  81
  82 # the directory where pid files go
  83 PIDDIR = @piddir@
  84 # man pages language(s)
  85 man_langs = "@manlangs@"
  86
  87 LIBSMBCLIENT_MAJOR=0
  88 LIBSMBCLIENT_MINOR=1
  89
  90
  91 FLAGS1 = $(CFLAGS) @FLAGS1@ -Iinclude -I$(srcdir)/include -I$(srcdir)/ubiqx -I$(srcdir)/smbwrapper  -I. $(CPPFLAGS) -I$(srcdir)
  92 FLAGS2 =
  93 FLAGS3 =
  94 FLAGS4 =
  95 FLAGS5 = $(FLAGS1) $(FLAGS2) $(FLAGS3) $(FLAGS4)
  96 FLAGS  = $(ISA) $(FLAGS5)
  97 FLAGS32  = $(ISA32) $(FLAGS5)
  98
  99 PASSWD_FLAGS = -DSMB_PASSWD_FILE=\"$(SMB_PASSWD_FILE)\" -DPRIVATE_DIR=\"$(PRIVATE_DIR)\"
 100 PATH_FLAGS1 = -DCONFIGFILE=\"$(CONFIGFILE)\"  -DSBINDIR=\"$(SBINDIR)\"
 101 PATH_FLAGS2 = $(PATH_FLAGS1) -DBINDIR=\"$(BINDIR)\" -DDRIVERFILE=\"$(DRIVERFILE)\"
 102 PATH_FLAGS3 = $(PATH_FLAGS2) -DLMHOSTSFILE=\"$(LMHOSTSFILE)\"
 103 PATH_FLAGS4 = $(PATH_FLAGS3) -DSWATDIR=\"$(SWATDIR)\"  -DLOCKDIR=\"$(LOCKDIR)\" -DPIDDIR=\"$(PIDDIR)\"
 104 PATH_FLAGS5 = $(PATH_FLAGS4) -DLIBDIR=\"$(LIBDIR)\" \
 105               -DLOGFILEBASE=\"$(LOGFILEBASE)\" -DSHLIBEXT=\"@SHLIBEXT@\"
 106 PATH_FLAGS6 = $(PATH_FLAGS5) -DCONFIGDIR=\"$(CONFIGDIR)\"
 107 PATH_FLAGS = $(PATH_FLAGS6) $(PASSWD_FLAGS)
 108
 109 # Note that all executable programs now provide for an optional executable suffix.
 110
 111 SBIN_PROGS = bin/smbd@EXEEXT@ bin/nmbd@EXEEXT@ bin/swat@EXEEXT@ \
 112         bin/wrepld@EXEEXT@ @EXTRA_SBIN_PROGS@
 113
 114 BIN_PROGS1 = bin/smbclient@EXEEXT@ bin/net@EXEEXT@ bin/smbspool@EXEEXT@ \
 115         bin/testparm@EXEEXT@ bin/testprns@EXEEXT@ bin/smbstatus@EXEEXT@
 116 BIN_PROGS2 = bin/smbcontrol@EXEEXT@ bin/smbtree@EXEEXT@ bin/tdbbackup@EXEEXT@ \
 117         bin/nmblookup@EXEEXT@ bin/pdbedit@EXEEXT@
 118 BIN_PROGS3 = bin/smbpasswd@EXEEXT@ bin/rpcclient@EXEEXT@ bin/smbcacls@EXEEXT@ \
 119         bin/profiles@EXEEXT@ bin/smbgroupedit@EXEEXT@ bin/ntlm_auth@EXEEXT@ \
 120         bin/editreg@EXEEXT@
 121
 122 TORTURE_PROGS = bin/smbtorture@EXEEXT@ bin/msgtest@EXEEXT@ \
 123         bin/masktest@EXEEXT@ bin/locktest@EXEEXT@ \
 124         bin/locktest2@EXEEXT@ bin/nsstest@EXEEXT@ bin/vfstest@EXEEXT@
 125
 126 BIN_PROGS = $(BIN_PROGS1) $(BIN_PROGS2) $(BIN_PROGS3) @EXTRA_BIN_PROGS@
 127
 128 SHLIBS = @SHLIB_PROGS@ @LIBSMBCLIENT@
 129
 130 SCRIPTS = $(srcdir)/script/smbtar $(srcdir)/script/addtosmbpass $(srcdir)/script/convert_smbpasswd \
 131           $(builddir)/script/findsmb
 132
 133 QUOTAOBJS=@QUOTAOBJS@
 134
 135 VFS_MODULES = bin/vfs_audit.@SHLIBEXT@ bin/vfs_extd_audit.@SHLIBEXT@ bin/vfs_recycle.@SHLIBEXT@ \
 136         bin/vfs_netatalk.@SHLIBEXT@ bin/vfs_fake_perms.@SHLIBEXT@
 137 PDB_MODULES = @MODULE_MYSQL@ @MODULE_XML@
 138 MODULES = bin/developer.@SHLIBEXT@
 139
 140 ######################################################################
 141 # object file lists
 142 ######################################################################
 143
 144 TDBBASE_OBJ = tdb/tdb.o tdb/spinlock.o
 145 TDB_OBJ = $(TDBBASE_OBJ) tdb/tdbutil.o
 146
 147 LIB_OBJ = lib/charcnv.o lib/debug.o lib/fault.o \
 148           lib/getsmbpass.o lib/interface.o lib/md4.o \
 149           lib/interfaces.o lib/pidfile.o lib/replace.o \
 150           lib/signal.o lib/system.o lib/sendfile.o lib/time.o \
 151           lib/ufc.o lib/genrand.o lib/username.o \
 152           lib/util_getent.o lib/util_pw.o lib/access.o lib/smbrun.o \
 153           lib/bitmap.o lib/crc32.o lib/snprintf.o lib/dprintf.o \
 154           lib/xfile.o lib/wins_srv.o \
 155           lib/util_str.o lib/util_sid.o lib/util_uuid.o \
 156           lib/util_unistr.o lib/util_file.o lib/data_blob.o \
 157           lib/util.o lib/util_sock.o lib/util_sec.o \
 158           lib/talloc.o lib/hash.o lib/substitute.o lib/fsusage.o \
 159           lib/ms_fnmatch.o lib/select.o lib/messages.o \
 160           lib/tallocmsg.o lib/dmallocmsg.o \
 161           lib/md5.o lib/hmacmd5.o lib/iconv.o lib/smbpasswd.o \
 162           nsswitch/wb_client.o nsswitch/wb_common.o \
 163           lib/pam_errors.o intl/lang_tdb.o lib/account_pol.o \
 164           lib/adt_tree.o lib/gencache.o $(TDB_OBJ) \
 165           lib/module.o lib/genparser.o lib/genparser_samba.o \
 166           lib/ldap_escape.o
 167
 168 LIB_SMBD_OBJ = lib/system_smbd.o lib/util_smbd.o
 169
 170 READLINE_OBJ = lib/readline.o
 171
 172 POPT_LIB_OBJ = lib/popt_common.o
 173
 174 UBIQX_OBJ = ubiqx/ubi_BinTree.o ubiqx/ubi_Cache.o ubiqx/ubi_SplayTree.o \
 175             ubiqx/ubi_dLinkList.o ubiqx/ubi_sLinkList.o
 176
 177 PARAM_OBJ = param/loadparm.o param/params.o dynconfig.o
 178
 179 LIBADS_OBJ = libads/ldap.o libads/ldap_printer.o libads/sasl.o \
 180              libads/krb5_setpw.o libads/kerberos.o libads/ldap_user.o \
 181              libads/ads_struct.o libads/ads_status.o \
 182              libads/disp_sec.o libads/ads_utils.o libads/ldap_utils.o \
 183              libads/ads_ldap.o
 184
 185 LIBADS_SERVER_OBJ = libads/util.o libads/kerberos_verify.o
 186
 187 SECRETS_OBJ = passdb/secrets.o
 188
 189 LIBSMB_OBJ = libsmb/clientgen.o libsmb/cliconnect.o libsmb/clifile.o \
 190              libsmb/clikrb5.o libsmb/clispnego.o libsmb/asn1.o \
 191              libsmb/clirap.o libsmb/clierror.o libsmb/climessage.o \
 192              libsmb/clireadwrite.o libsmb/clilist.o libsmb/cliprint.o \
 193              libsmb/clitrans.o libsmb/clisecdesc.o libsmb/clidgram.o \
 194              libsmb/namequery.o libsmb/nmblib.o libsmb/clistr.o \
 195              libsmb/nterr.o libsmb/smbdes.o libsmb/smbencrypt.o \
 196              libsmb/smberr.o libsmb/credentials.o libsmb/pwd_cache.o \
 197              libsmb/clioplock.o libsmb/errormap.o libsmb/clirap2.o \
 198              libsmb/passchange.o libsmb/unexpected.o libsmb/doserr.o \
 199              libsmb/namecache.o libsmb/trustdom_cache.o libsmb/ntlmssp.o \
 200              $(RPC_PARSE_OBJ1)
 201
 202 LIBMSRPC_OBJ = rpc_client/cli_lsarpc.o rpc_client/cli_samr.o \
 203                rpc_client/cli_netlogon.o rpc_client/cli_srvsvc.o \
 204                rpc_client/cli_wkssvc.o rpc_client/cli_dfs.o \
 205                rpc_client/cli_reg.o rpc_client/cli_pipe.o \
 206                rpc_client/cli_spoolss.o rpc_client/cli_spoolss_notify.o  \
 207                rpc_client/cli_ds.o libsmb/namequery_dc.o
 208
 209 LIBMSRPC_SERVER_OBJ = libsmb/trust_passwd.o
 210
 211 REGOBJS_OBJ = registry/reg_objects.o
 212 REGISTRY_OBJ = registry/reg_frontend.o registry/reg_cachehook.o registry/reg_printing.o \
 213                registry/reg_db.o
 214
 215 RPC_LSA_OBJ = rpc_server/srv_lsa.o rpc_server/srv_lsa_nt.o
 216
 217 RPC_NETLOG_OBJ = rpc_server/srv_netlog.o rpc_server/srv_netlog_nt.o
 218
 219 RPC_SAMR_OBJ = rpc_server/srv_samr.o rpc_server/srv_samr_nt.o \
 220                rpc_server/srv_samr_util.o
 221
 222 RPC_REG_OBJ =  rpc_server/srv_reg.o rpc_server/srv_reg_nt.o
 223
 224 RPC_SVC_OBJ = rpc_server/srv_srvsvc.o rpc_server/srv_srvsvc_nt.o
 225
 226 RPC_WKS_OBJ =  rpc_server/srv_wkssvc.o rpc_server/srv_wkssvc_nt.o
 227
 228 RPC_DFS_OBJ =  rpc_server/srv_dfs.o rpc_server/srv_dfs_nt.o
 229 RPC_SPOOLSS_OBJ = rpc_server/srv_spoolss.o rpc_server/srv_spoolss_nt.o
 230
 231 RPC_PIPE_OBJ = rpc_server/srv_pipe_hnd.o rpc_server/srv_util.o \
 232                rpc_server/srv_pipe.o rpc_server/srv_lsa_hnd.o
 233
 234 # These are like they are to avoid a dependency on GNU MAKE
 235 @LSA_DYNAMIC_YES@RPC_MODULES1 = bin/librpc_lsarpc.@SHLIBEXT@
 236 @NETLOG_DYNAMIC_YES@RPC_MODULES2 = bin/librpc_NETLOGON.@SHLIBEXT@
 237 @SAMR_DYNAMIC_YES@RPC_MODULES3 = bin/librpc_samr.@SHLIBEXT@
 238 @SVC_DYNAMIC_YES@RPC_MODULES4 = bin/librpc_srvsvc.@SHLIBEXT@
 239 @WKS_DYNAMIC_YES@RPC_MODULES5 = bin/librpc_wkssvc.@SHLIBEXT@
 240 @REG_DYNAMIC_YES@RPC_MODULES6 = bin/librpc_winreg.@SHLIBEXT@
 241 @SPOOLSS_DYNAMIC_YES@RPC_MODULES7 = bin/librpc_spoolss.@SHLIBEXT@
 242 @DFS_DYNAMIC_YES@RPC_MODULES8 = bin/librpc_netdfs.@SHLIBEXT@
 243 RPC_MODULES = $(RPC_MODULES1) $(RPC_MODULES2) $(RPC_MODULES3) $(RPC_MODULES4) \
 244         $(RPC_MODULES5) $(RPC_MODULES6) $(RPC_MODULES7) $(RPC_MODULES8)
 245
 246 @LSA_DYNAMIC_NO@RPC_PIPE_OBJ1 = $(RPC_LSA_OBJ)
 247 @NETLOG_DYNAMIC_NO@RPC_PIPE_OBJ2 = $(RPC_NETLOG_OBJ)
 248 @SAMR_DYNAMIC_NO@RPC_PIPE_OBJ3 = $(RPC_SAMR_OBJ)
 249 @SVC_DYNAMIC_NO@RPC_PIPE_OBJ4 = $(RPC_SVC_OBJ)
 250 @WKS_DYNAMIC_NO@RPC_PIPE_OBJ5 = $(RPC_WKS_OBJ)
 251 @REG_DYNAMIC_NO@RPC_PIPE_OBJ6 = $(RPC_REG_OBJ)
 252 @SPOOLSS_DYNAMIC_NO@RPC_PIPE_OBJ7 = $(RPC_SPOOLSS_OBJ)
 253 @DFS_DYNAMIC_NO@RPC_PIPE_OBJ8 = $(RPC_DFS_OBJ)
 254 RPC_SERVER_OBJ = $(RPC_PIPE_OBJ1) $(RPC_PIPE_OBJ2) $(RPC_PIPE_OBJ3) \
 255         $(RPC_PIPE_OBJ4) $(RPC_PIPE_OBJ5) $(RPC_PIPE_OBJ6) $(RPC_PIPE_OBJ7) \
 256         $(RPC_PIPE_OBJ8) $(RPC_PIPE_OBJ)
 257
 258 # this includes only the low level parse code, not stuff
 259 # that requires knowledge of security contexts
 260 RPC_PARSE_OBJ1 = rpc_parse/parse_prs.o rpc_parse/parse_sec.o \
 261                  rpc_parse/parse_misc.o
 262
 263 RPC_PARSE_OBJ = rpc_parse/parse_lsa.o rpc_parse/parse_net.o \
 264                 rpc_parse/parse_reg.o rpc_parse/parse_rpc.o \
 265                 rpc_parse/parse_samr.o rpc_parse/parse_srv.o \
 266                 rpc_parse/parse_wks.o rpc_parse/parse_ds.o \
 267                 rpc_parse/parse_spoolss.o rpc_parse/parse_dfs.o \
 268                 $(REGOBJS_OBJ)
 269
 270
 271 RPC_CLIENT_OBJ = rpc_client/cli_pipe.o
 272
 273 LOCKING_OBJ = locking/locking.o locking/brlock.o locking/posix.o
 274
 275 PASSDB_GET_SET_OBJ = passdb/pdb_get_set.o
 276
 277 PASSDB_OBJ = $(PASSDB_GET_SET_OBJ) passdb/passdb.o passdb/pdb_interface.o \
 278                 passdb/machine_sid.o passdb/pdb_smbpasswd.o \
 279                 passdb/pdb_tdb.o passdb/pdb_ldap.o \
 280                 passdb/pdb_unix.o passdb/util_sam_sid.o \
 281                 passdb/pdb_compat.o passdb/pdb_nisplus.o passdb/privileges.o
 282
 283 XML_OBJ = modules/xml.o
 284 MYSQL_OBJ = modules/mysql.o
 285 DEVEL_HELP_OBJ = modules/developer.o
 286
 287 SAM_STATIC_MODULES = sam/sam_plugin.o sam/sam_skel.o sam/sam_ads.o
 288
 289 SAM_OBJ = sam/account.o sam/get_set_account.o sam/get_set_group.o \
 290                 sam/get_set_domain.o sam/interface.o $(SAM_STATIC_MODULES)
 291
 292 SAMTEST_OBJ = torture/samtest.o torture/cmd_sam.o $(SAM_OBJ) $(LIB_OBJ) $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) $(READLINE_OBJ) lib/util_seaccess.o $(LIBADS_OBJ) $(PASSDB_OBJ) $(SECRETS_OBJ) $(GROUPDB_OBJ)
 293
 294 GROUPDB_OBJ = groupdb/mapping.o
 295
 296 # passdb/smbpass.o passdb/ldap.o passdb/nispass.o
 297
 298 PROFILE_OBJ = profile/profile.o
 299
 300 OPLOCK_OBJ = smbd/oplock.o smbd/oplock_irix.o smbd/oplock_linux.o
 301
 302 NOTIFY_OBJ = smbd/notify.o smbd/notify_hash.o smbd/notify_kernel.o
 303
 304 PLAINTEXT_AUTH_OBJ = auth/pampass.o auth/pass_check.o
 305
 306 UNIGRP_OBJ = libsmb/netlogon_unigrp.o
 307
 308 AUTH_OBJ = auth/auth.o auth/auth_sam.o auth/auth_server.o auth/auth_domain.o \
 309            auth/auth_rhosts.o auth/auth_unix.o auth/auth_util.o auth/auth_winbind.o \
 310            auth/auth_builtin.o auth/auth_compat.o auth/auth_ntlmssp.o \
 311            $(PLAINTEXT_AUTH_OBJ) $(UNIGRP_OBJ)
 312
 313 MANGLE_OBJ = smbd/mangle.o smbd/mangle_hash.o smbd/mangle_map.o smbd/mangle_hash2.o
 314
 315 SMBD_OBJ_MAIN = smbd/server.o
 316
 317 SMBD_OBJ_SRV = smbd/files.o smbd/chgpasswd.o smbd/connection.o \
 318                smbd/utmp.o smbd/session.o \
 319                smbd/dfree.o smbd/dir.o smbd/password.o smbd/conn.o smbd/fileio.o \
 320                smbd/ipc.o smbd/lanman.o smbd/negprot.o \
 321                smbd/message.o smbd/nttrans.o smbd/pipes.o \
 322                smbd/reply.o smbd/sesssetup.o smbd/trans2.o smbd/uid.o \
 323                smbd/dosmode.o smbd/filename.o smbd/open.o smbd/close.o \
 324                smbd/blocking.o smbd/sec_ctx.o \
 325                smbd/vfs.o smbd/vfs-wrap.o smbd/statcache.o \
 326                smbd/posix_acls.o lib/sysacls.o lib/server_mutex.o \
 327                smbd/process.o smbd/service.o smbd/error.o \
 328                printing/printfsp.o lib/util_seaccess.o smbd/srvstr.o \
 329                smbd/build_options.o \
 330                smbd/change_trust_pw.o \
 331                $(MANGLE_OBJ)
 332
 333 SMBD_OBJ_BASE = $(SMBD_OBJ_SRV) $(MSDFS_OBJ) $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) \
 334                 $(RPC_SERVER_OBJ) $(RPC_PARSE_OBJ) $(SECRETS_OBJ) \
 335                 $(LOCKING_OBJ) $(PASSDB_OBJ) $(PRINTING_OBJ) $(PROFILE_OBJ) \
 336                 $(LIB_OBJ) $(PRINTBACKEND_OBJ) $(QUOTAOBJS) $(OPLOCK_OBJ) \
 337                 $(NOTIFY_OBJ) $(GROUPDB_OBJ) $(AUTH_OBJ) \
 338                 $(LIBMSRPC_OBJ) $(LIBMSRPC_SERVER_OBJ) \
 339                 $(LIBADS_OBJ) $(LIBADS_SERVER_OBJ) \
 340                 $(LIB_SMBD_OBJ) $(REGISTRY_OBJ) $(POPT_LIB_OBJ)
 341
 342
 343 PRINTING_OBJ = printing/pcap.o printing/print_svid.o \
 344                                 printing/print_cups.o printing/print_generic.o \
 345                                 printing/lpq_parse.o printing/load.o
 346
 347 PRINTBACKEND_OBJ = printing/printing.o printing/nt_printing.o printing/notify.o \
 348                 printing/printing_db.o
 349
 350 MSDFS_OBJ = msdfs/msdfs.o
 351
 352 SMBD_OBJ = $(SMBD_OBJ_MAIN) $(SMBD_OBJ_BASE)
 353
 354 NMBD_OBJ1 = nmbd/asyncdns.o nmbd/nmbd.o nmbd/nmbd_become_dmb.o \
 355             nmbd/nmbd_become_lmb.o nmbd/nmbd_browserdb.o \
 356             nmbd/nmbd_browsesync.o nmbd/nmbd_elections.o \
 357             nmbd/nmbd_incomingdgrams.o nmbd/nmbd_incomingrequests.o \
 358             nmbd/nmbd_lmhosts.o nmbd/nmbd_logonnames.o nmbd/nmbd_mynames.o \
 359             nmbd/nmbd_namelistdb.o nmbd/nmbd_namequery.o \
 360             nmbd/nmbd_nameregister.o nmbd/nmbd_namerelease.o \
 361             nmbd/nmbd_nodestatus.o nmbd/nmbd_packets.o \
 362             nmbd/nmbd_processlogon.o nmbd/nmbd_responserecordsdb.o \
 363             nmbd/nmbd_sendannounce.o nmbd/nmbd_serverlistdb.o \
 364             nmbd/nmbd_subnetdb.o nmbd/nmbd_winsproxy.o nmbd/nmbd_winsserver.o \
 365             nmbd/nmbd_workgroupdb.o nmbd/nmbd_synclists.o
 366
 367 NMBD_OBJ = $(NMBD_OBJ1) $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) \
 368            $(PROFILE_OBJ) $(LIB_OBJ) $(SECRETS_OBJ) $(POPT_LIB_OBJ)
 369
 370 WREPL_OBJ1 = wrepld/server.o wrepld/process.o wrepld/parser.o wrepld/socket.o \
 371              wrepld/partners.o
 372
 373 WREPL_OBJ = $(WREPL_OBJ1)  $(PARAM_OBJ) $(UBIQX_OBJ) \
 374             $(PROFILE_OBJ) $(LIB_OBJ)
 375
 376 SWAT_OBJ1 = web/cgi.o web/diagnose.o web/startstop.o web/statuspage.o \
 377            web/swat.o web/neg_lang.o
 378
 379 SWAT_OBJ = $(SWAT_OBJ1) $(PRINTING_OBJ) $(LIBSMB_OBJ) $(LOCKING_OBJ) \
 380            $(PARAM_OBJ) $(PASSDB_OBJ) $(SECRETS_OBJ) \
 381            $(UBIQX_OBJ) $(LIB_OBJ) $(GROUPDB_OBJ) $(PLAINTEXT_AUTH_OBJ)
 382
 383 SMBSH_OBJ = smbwrapper/smbsh.o smbwrapper/shared.o \
 384             $(PARAM_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
 385
 386 STATUS_OBJ = utils/status.o $(LOCKING_OBJ) $(PARAM_OBJ) \
 387              $(UBIQX_OBJ) $(PROFILE_OBJ) $(LIB_OBJ) $(POPT_LIB_OBJ)
 388
 389 SMBCONTROL_OBJ = utils/smbcontrol.o $(LOCKING_OBJ) $(PARAM_OBJ) \
 390         $(UBIQX_OBJ) $(PROFILE_OBJ) $(LIB_OBJ) printing/notify.o \
 391         printing/printing_db.o
 392
 393 SMBTREE_OBJ = utils/smbtree.o $(LOCKING_OBJ) $(PARAM_OBJ) \
 394              $(UBIQX_OBJ) $(PROFILE_OBJ) $(LIB_OBJ) $(LIBSMB_OBJ)
 395
 396 TESTPARM_OBJ = utils/testparm.o \
 397                $(PARAM_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) $(POPT_LIB_OBJ)
 398
 399 TESTPRNS_OBJ = utils/testprns.o $(PARAM_OBJ) $(PRINTING_OBJ) $(UBIQX_OBJ) \
 400                $(LIB_OBJ)
 401
 402 SMBPASSWD_OBJ = utils/smbpasswd.o $(PARAM_OBJ) $(SECRETS_OBJ) \
 403                 $(LIBSMB_OBJ) $(PASSDB_OBJ) $(GROUPDB_OBJ)\
 404                 $(UBIQX_OBJ) $(LIB_OBJ)
 405
 406 PDBEDIT_OBJ = utils/pdbedit.o $(PARAM_OBJ) $(LIBSMB_OBJ) $(PASSDB_OBJ) \
 407                 $(UBIQX_OBJ) $(LIB_OBJ) $(GROUPDB_OBJ) $(SECRETS_OBJ) \
 408                 $(POPT_LIB_OBJ)
 409
 410 SMBGROUPEDIT_OBJ = utils/smbgroupedit.o $(GROUPDB_OBJ) $(PARAM_OBJ) \
 411                 $(LIBSMB_OBJ) $(PASSDB_OBJ) $(SECRETS_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
 412
 413 RPCCLIENT_OBJ1 = rpcclient/rpcclient.o rpcclient/cmd_lsarpc.o \
 414                  rpcclient/cmd_samr.o rpcclient/cmd_spoolss.o \
 415                  rpcclient/cmd_netlogon.o rpcclient/cmd_srvsvc.o \
 416                  rpcclient/cmd_dfs.o rpcclient/cmd_reg.o \
 417                  rpcclient/display_sec.o rpcclient/cmd_ds.o
 418
 419 RPCCLIENT_OBJ = $(RPCCLIENT_OBJ1) \
 420              $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) \
 421              $(RPC_PARSE_OBJ) $(PASSDB_OBJ) $(LIBMSRPC_OBJ) \
 422              $(READLINE_OBJ) $(GROUPDB_OBJ) \
 423              $(LIBADS_OBJ) $(SECRETS_OBJ) $(POPT_LIB_OBJ)
 424
 425 PAM_WINBIND_OBJ = nsswitch/pam_winbind.po nsswitch/wb_common.po lib/snprintf.po
 426
 427 SMBW_OBJ1 = smbwrapper/smbw.o \
 428                 smbwrapper/smbw_dir.o smbwrapper/smbw_stat.o \
 429                 smbwrapper/realcalls.o smbwrapper/shared.o \
 430                 smbwrapper/smbw_cache.o
 431
 432 SMBW_OBJ = $(SMBW_OBJ1) $(LIBSMB_OBJ) $(PARAM_OBJ) \
 433                 $(UBIQX_OBJ) $(LIB_OBJ)
 434
 435 SMBWRAPPER_OBJ1 = smbwrapper/wrapped.o
 436
 437 SMBWRAPPER_OBJ = $(SMBW_OBJ) $(SMBWRAPPER_OBJ1)
 438
 439 LIBSMBCLIENT_OBJ = libsmb/libsmbclient.o libsmb/libsmb_compat.o \
 440                    libsmb/libsmb_cache.o $(LIB_OBJ) \
 441                    $(LIBSMB_OBJ) $(PARAM_OBJ) $(UBIQX_OBJ)
 442
 443 # This shared library is intended for linking with unit test programs
 444 # to test Samba internals.  It's called libbigballofmud.so to
 445 # discourage casual usage.
 446
 447 LIBBIGBALLOFMUD_MAJOR = 0
 448
 449 LIBBIGBALLOFMUD_OBJ = $(LIB_OBJ) $(UBIQX_OBJ) $(PARAM_OBJ) $(SECRETS_OBJ) \
 450         $(LIBSMB_OBJ) $(LIBMSRPC_OBJ) $(RPC_PARSE_OBJ) $(PASSDB_OBJ) \
 451         $(GROUPDB_OBJ)
 452
 453 LIBBIGBALLOFMUD_PICOBJS = $(LIBBIGBALLOFMUD_OBJ:.o=.po)
 454
 455 CLIENT_OBJ1 = client/client.o client/clitar.o
 456
 457 CLIENT_OBJ = $(CLIENT_OBJ1) $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) \
 458              $(READLINE_OBJ) $(POPT_LIB_OBJ)
 459
 460 NET_OBJ1 = utils/net.o utils/net_ads.o utils/net_ads_cldap.o utils/net_help.o \
 461            utils/net_rap.o utils/net_rpc.o utils/net_rpc_samsync.o \
 462            utils/net_rpc_join.o utils/net_time.o utils/net_lookup.o \
 463            utils/net_cache.o
 464
 465 NET_OBJ = $(NET_OBJ1) $(SECRETS_OBJ) $(LIBSMB_OBJ) \
 466           $(RPC_PARSE_OBJ) $(PASSDB_OBJ) $(GROUPDB_OBJ) \
 467           $(PARAM_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) \
 468           $(LIBMSRPC_OBJ) $(LIBMSRPC_SERVER_OBJ) \
 469           $(LIBADS_OBJ) $(LIBADS_SERVER_OBJ) $(POPT_LIB_OBJ)
 470
 471 CUPS_OBJ = client/smbspool.o $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
 472
 473 MOUNT_OBJ = client/smbmount.o \
 474              $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
 475
 476 MNT_OBJ = client/smbmnt.o
 477
 478 UMOUNT_OBJ = client/smbumount.o
 479
 480 NMBLOOKUP_OBJ = utils/nmblookup.o $(PARAM_OBJ) $(UBIQX_OBJ) \
 481                 $(LIBSMB_OBJ) $(LIB_OBJ)
 482
 483 SMBTORTURE_OBJ1 = torture/torture.o torture/nbio.o torture/scanner.o torture/utable.o \
 484                 torture/denytest.o torture/mangle_test.o
 485
 486 SMBTORTURE_OBJ = $(SMBTORTURE_OBJ1) \
 487         $(LIBSMB_OBJ) $(PARAM_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
 488
 489 MASKTEST_OBJ = torture/masktest.o $(LIBSMB_OBJ) $(PARAM_OBJ) \
 490                  $(UBIQX_OBJ) $(LIB_OBJ)
 491
 492 MSGTEST_OBJ = torture/msgtest.o $(LIBSMB_OBJ) $(PARAM_OBJ) \
 493                  $(UBIQX_OBJ) $(LIB_OBJ)
 494
 495 LOCKTEST_OBJ = torture/locktest.o $(LOCKING_OBJ) $(LIBSMB_OBJ) $(PARAM_OBJ) \
 496                  $(UBIQX_OBJ) $(LIB_OBJ)
 497
 498 NSSTEST_OBJ = torture/nsstest.o $(LIBSMB_OBJ) $(PARAM_OBJ) \
 499                  $(UBIQX_OBJ) $(LIB_OBJ)
 500
 501 VFSTEST_OBJ = torture/cmd_vfs.o torture/vfstest.o $(SMBD_OBJ_BASE) $(READLINE_OBJ)
 502
 503 VFS_AUDIT_OBJ = modules/vfs_audit.o
 504 VFS_EXTD_AUDIT_OBJ = modules/vfs_extd_audit.o
 505 VFS_RECYCLE_OBJ = modules/vfs_recycle.o
 506 VFS_NETATALK_OBJ = modules/vfs_netatalk.o
 507 VFS_FAKE_PERMS_OBJ = modules/vfs_fake_perms.o
 508
 509 LOCKTEST2_OBJ = torture/locktest2.o $(LOCKING_OBJ) $(LIBSMB_OBJ) $(PARAM_OBJ) \
 510                  $(UBIQX_OBJ) $(LIB_OBJ)
 511
 512 SMBCACLS_OBJ = utils/smbcacls.o $(LOCKING_OBJ) $(LIBSMB_OBJ) $(PARAM_OBJ) \
 513                  $(UBIQX_OBJ) $(LIB_OBJ) $(RPC_PARSE_OBJ) $(PASSDB_GET_SET_OBJ) \
 514                  $(LIBMSRPC_OBJ) $(SECRETS_OBJ)
 515
 516 TALLOCTORT_OBJ = lib/talloctort.o  $(LIB_OBJ) $(PARAM_OBJ) $(UBIQX_OBJ)
 517
 518 RPCTORTURE_OBJ = torture/rpctorture.o \
 519              rpcclient/display.o \
 520              rpcclient/cmd_lsarpc.o \
 521              rpcclient/cmd_wkssvc.o \
 522              rpcclient/cmd_samr.o \
 523              rpcclient/cmd_srvsvc.o \
 524              rpcclient/cmd_netlogon.o \
 525              $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) \
 526              $(RPC_CLIENT_OBJ) $(RPC_PARSE_OBJ) $(PASSDB_GET_SET_OBJ)
 527
 528 DEBUG2HTML_OBJ = utils/debug2html.o ubiqx/debugparse.o
 529
 530 SMBFILTER_OBJ = utils/smbfilter.o $(LIBSMB_OBJ) $(PARAM_OBJ) \
 531                  $(UBIQX_OBJ) $(LIB_OBJ)
 532
 533 PROTO_OBJ = $(SMBD_OBJ_MAIN) \
 534             $(SMBD_OBJ_SRV) $(NMBD_OBJ1) $(SWAT_OBJ1) $(LIB_OBJ) $(LIBSMB_OBJ) \
 535             $(SMBW_OBJ1) $(SMBWRAPPER_OBJ1) $(SMBTORTURE_OBJ1) $(RPCCLIENT_OBJ1) \
 536             $(LIBMSRPC_OBJ) $(LIBMSRPC_SERVER_OBJ) $(RPC_CLIENT_OBJ) \
 537             $(RPC_PIPE_OBJ) $(RPC_PARSE_OBJ) \
 538             $(AUTH_OBJ) $(PARAM_OBJ) $(LOCKING_OBJ) $(SECRETS_OBJ) \
 539             $(PRINTING_OBJ) $(PRINTBACKEND_OBJ) $(OPLOCK_OBJ) $(NOTIFY_OBJ) \
 540             $(QUOTAOBJS) $(PASSDB_OBJ) $(GROUPDB_OBJ) $(MSDFS_OBJ) \
 541             $(READLINE_OBJ) $(PROFILE_OBJ) $(LIBADS_OBJ) $(LIBADS_SERVER_OBJ) \
 542             $(LIB_SMBD_OBJ) $(SAM_OBJ) $(REGISTRY_OBJ) $(POPT_LIB_OBJ) \
 543             $(RPC_LSA_OBJ) $(RPC_NETLOG_OBJ) $(RPC_SAMR_OBJ) $(RPC_REG_OBJ) \
 544             $(RPC_SVC_OBJ) $(RPC_WKS_OBJ) $(RPC_DFS_OBJ) $(RPC_SPOOLSS_OBJ)
 545
 546 NSS_OBJ_0 = nsswitch/wins.o $(PARAM_OBJ) $(UBIQX_OBJ) $(LIBSMB_OBJ) \
 547             $(LIB_OBJ) $(NSSWINS_OBJ)
 548
 549 NSS_OBJ = $(NSS_OBJ_0:.o=.po)
 550
 551 PICOBJS = $(SMBWRAPPER_OBJ:.o=.po)
 552 PICOBJS32 = $(SMBWRAPPER_OBJ:.o=.po32)
 553 LIBSMBCLIENT_PICOBJS = $(LIBSMBCLIENT_OBJ:.o=.po)
 554
 555 PAM_SMBPASS_OBJ_0 = pam_smbpass/pam_smb_auth.o pam_smbpass/pam_smb_passwd.o \
 556                pam_smbpass/pam_smb_acct.o pam_smbpass/support.o \
 557                libsmb/smbencrypt.o libsmb/smbdes.o libsmb/nterr.o \
 558                $(PARAM_OBJ) $(LIB_OBJ) $(PASSDB_OBJ) $(GROUPDB_OBJ) \
 559                $(SECRETS_OBJ) $(UBIQX_OBJ)
 560
 561 PAM_SMBPASS_PICOOBJ = $(PAM_SMBPASS_OBJ_0:.o=.po)
 562
 563 WINBINDD_OBJ1 = \
 564                 nsswitch/winbindd.o       \
 565                 nsswitch/winbindd_user.o  \
 566                 nsswitch/winbindd_group.o \
 567                 nsswitch/winbindd_idmap.o \
 568                 nsswitch/winbindd_util.o  \
 569                 nsswitch/winbindd_cache.o \
 570                 nsswitch/winbindd_pam.o   \
 571                 nsswitch/winbindd_sid.o   \
 572                 nsswitch/winbindd_misc.o  \
 573                 nsswitch/winbindd_cm.o \
 574                 nsswitch/winbindd_wins.o \
 575                 nsswitch/winbindd_rpc.o \
 576                 nsswitch/winbindd_ads.o \
 577                 nsswitch/winbindd_dual.o
 578
 579 WINBINDD_OBJ = \
 580                 $(WINBINDD_OBJ1) $(PASSDB_GET_SET_OBJ) \
 581                 $(LIBNMB_OBJ) $(PARAM_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) \
 582                 $(LIBSMB_OBJ) $(LIBMSRPC_OBJ) $(RPC_PARSE_OBJ) \
 583                 $(PROFILE_OBJ) $(UNIGRP_OBJ) \
 584                 $(SECRETS_OBJ) $(LIBADS_OBJ)
 585
 586 WBINFO_OBJ = nsswitch/wbinfo.o libsmb/smbencrypt.o libsmb/smbdes.o
 587
 588 WINBIND_NSS_OBJ = nsswitch/winbind_nss.o nsswitch/wb_common.o @WINBIND_NSS_EXTRA_OBJS@
 589
 590 WINBIND_NSS_PICOBJS = $(WINBIND_NSS_OBJ:.o=.po)
 591
 592 POPT_OBJS=popt/findme.o popt/popt.o popt/poptconfig.o \
 593           popt/popthelp.o popt/poptparse.o
 594
 595 TDBBACKUP_OBJ = tdb/tdbbackup.o $(TDBBASE_OBJ)
 596
 597 NTLM_AUTH_OBJ = utils/ntlm_auth.o $(LIBSMB_OBJ) $(POPT_LIB_OBJ)
 598
 599 ######################################################################
 600 # now the rules...
 601 ######################################################################
 602 all : SHOWFLAGS proto_exists $(SBIN_PROGS) $(BIN_PROGS) $(SHLIBS) \
 603         $(TORTURE_PROGS) $(RPC_MODULES) @EXTRA_ALL_TARGETS@
 604
 605 pam_smbpass : SHOWFLAGS bin/pam_smbpass.@SHLIBEXT@
 606
 607 smbwrapper : SHOWFLAGS @SMBWRAPPER@
 608
 609 torture : SHOWFLAGS $(TORTURE_PROGS)
 610
 611 smbtorture : SHOWFLAGS bin/smbtorture@EXEEXT@
 612
 613 masktest : SHOWFLAGS bin/masktest@EXEEXT@
 614
 615 msgtest : SHOWFLAGS bin/msgtest@EXEEXT@
 616
 617 locktest : SHOWFLAGS bin/locktest@EXEEXT@
 618
 619 smbcacls : SHOWFLAGS bin/smbcacls@EXEEXT@
 620
 621 locktest2 : SHOWFLAGS bin/locktest2@EXEEXT@
 622
 623 rpctorture : SHOWFLAGS bin/rpctorture@EXEEXT@
 624
 625 debug2html : SHOWFLAGS bin/debug2html@EXEEXT@
 626
 627 smbfilter : SHOWFLAGS bin/smbfilter@EXEEXT@
 628
 629 talloctort : SHOWFLAGS bin/talloctort@EXEEXT@
 630
 631 nsswitch : SHOWFLAGS bin/winbindd@EXEEXT@ bin/wbinfo@EXEEXT@ nsswitch/libnss_winbind.so nsswitch/pam_winbind.so
 632
 633 wins : SHOWFLAGS nsswitch/libnss_wins.@SHLIBEXT@
 634
 635 modules: SHOWFLAGS proto_exists $(VFS_MODULES) $(PDB_MODULES) $(MODULES)
 636
 637 everything: all libsmbclient debug2html smbfilter talloctort
 638
 639 .SUFFIXES:
 640 .SUFFIXES: .c .o .po .po32 .lo
 641
 642 SHOWFLAGS:
 643         @echo "Using FLAGS = $(FLAGS)"
 644         @echo "      FLAGS32 = $(FLAGS32)"
 645         @echo "      LIBS = $(LIBS)"
 646         @echo "      LDSHFLAGS = $(LDSHFLAGS)"
 647         @echo "      LDFLAGS = $(LDFLAGS)"
 648
 649 MAKEDIR = || exec false; \
 650           if test -d "$$dir"; then :; else \
 651           echo mkdir "$$dir"; \
 652           mkdir -p "$$dir" >/dev/null 2>&1 || \
 653           test -d "$$dir" || \
 654           mkdir "$$dir" || \
 655           exec false; fi || exec false
 656
 657 .c.o:
 658         @if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
 659          dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
 660         @echo Compiling $*.c
 661         @$(CC) -I. -I$(srcdir) $(FLAGS) -c $< \
 662           -o $@
 663 @BROKEN_CC@     -mv `echo $@ | sed 's%^.*/%%g'` $@
 664
 665 # These dependencies are only approximately correct: we want to make
 666 # sure Samba's paths are updated if ./configure is re-run.  Really it
 667 # would be nice if "make prefix=/opt/samba all" also rebuilt things,
 668 # but since we also require "make install prefix=/opt/samba" *not* to
 669 # rebuild it's a bit hard.
 670
 671 dynconfig.o: dynconfig.c Makefile
 672         @echo Compiling $*.c
 673         @$(CC) $(FLAGS) $(PATH_FLAGS) -c $< -o $@
 674
 675 dynconfig.po: dynconfig.c Makefile
 676         @if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
 677           dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
 678         @echo Compiling $*.c with @PICFLAG@
 679         @$(CC) -I. -I$(srcdir) $(FLAGS) $(PATH_FLAGS) @PICFLAG@ -c $< -o $*.@PICSUFFIX@
 680 @BROKEN_CC@     -mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po$$%.o%'` $@
 681 @POBAD_CC@      @mv $*.po.o $@
 682
 683 .c.po:
 684         @if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
 685           dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
 686         @echo Compiling $*.c with @PICFLAG@
 687         @$(CC) -I. -I$(srcdir) $(FLAGS) @PICFLAG@ -c $< -o $*.@PICSUFFIX@
 688 @BROKEN_CC@     -mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po$$%.o%'` $@
 689 @POBAD_CC@      @mv $*.po.o $@
 690
 691 # this is for IRIX
 692 .c.po32:
 693         @if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
 694           dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
 695         @echo Compiling $*.c with @PICFLAG@ and -32
 696         @$(CC) -32 -I. -I$(srcdir) $(FLAGS32) $(PATH_FLAGS) @PICFLAG@ -c $< \
 697           -o $*.po32.o
 698 @BROKEN_CC@     -mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po32$$%.o%'` $@.o
 699         @mv $*.po32.o $@
 700
 701 bin/.dummy:
 702         @if (: >> $@ || : > $@) >/dev/null 2>&1; then :; else \
 703           dir=bin $(MAKEDIR); fi
 704         @: >> $@ || : > $@ # what a fancy emoticon!
 705
 706 bin/smbd@EXEEXT@: $(SMBD_OBJ) @BUILD_POPT@ bin/.dummy
 707         @echo Linking $@
 708         @$(CC) $(FLAGS) -o $@ $(SMBD_OBJ) $(LDFLAGS) $(DYNEXP) $(PRINTLIBS) \
 709           $(AUTHLIBS) $(LIBS) @BUILD_POPT@
 710
 711 bin/nmbd@EXEEXT@: $(NMBD_OBJ) @BUILD_POPT@ bin/.dummy
 712         @echo Linking $@
 713         @$(CC) $(FLAGS) -o $@ $(NMBD_OBJ) $(LDFLAGS) $(LIBS) @BUILD_POPT@
 714
 715 bin/wrepld@EXEEXT@: $(WREPL_OBJ) bin/.dummy
 716         @echo Linking $@
 717         @$(CC) $(FLAGS) -o $@ $(WREPL_OBJ) $(LDFLAGS) $(LIBS)
 718
 719 bin/swat@EXEEXT@: $(SWAT_OBJ) bin/.dummy
 720         @echo Linking $@
 721         @$(CC) $(FLAGS) -o $@ $(SWAT_OBJ) $(LDFLAGS) $(DYNEXP) $(PRINTLIBS) \
 722           $(AUTHLIBS) $(LIBS)
 723
 724 bin/rpcclient@EXEEXT@: $(RPCCLIENT_OBJ) @BUILD_POPT@ bin/.dummy
 725         @echo Linking $@
 726         @$(CC) $(FLAGS) -o $@ $(RPCCLIENT_OBJ) $(LDFLAGS) $(DYNEXP) $(TERMLDFLAGS) $(TERMLIBS) $(LIBS) @BUILD_POPT@
 727
 728 bin/smbclient@EXEEXT@: $(CLIENT_OBJ) @BUILD_POPT@ bin/.dummy
 729         @echo Linking $@
 730         @$(CC) $(FLAGS) -o $@ $(CLIENT_OBJ) $(LDFLAGS) $(TERMLDFLAGS) $(TERMLIBS) $(LIBS) @BUILD_POPT@
 731
 732 bin/net@EXEEXT@: $(NET_OBJ) @BUILD_POPT@ bin/.dummy
 733         @echo Linking $@
 734         @$(CC) $(FLAGS) -o $@ $(NET_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) @BUILD_POPT@
 735
 736 bin/profiles@EXEEXT@: utils/profiles.o bin/.dummy
 737         @echo Linking $@
 738         @$(CC) $(FLAGS) -o $@ utils/profiles.o $(LDFLAGS) $(LIBS)
 739
 740 bin/editreg@EXEEXT@: utils/editreg.o bin/.dummy
 741         @echo Linking $@
 742         @$(CC) $(FLAGS) -o $@ utils/editreg.o $(LDFLAGS) $(LIBS)
 743
 744 bin/smbspool@EXEEXT@: $(CUPS_OBJ) bin/.dummy
 745         @echo Linking $@
 746         @$(CC) $(FLAGS) -o $@ $(CUPS_OBJ) $(LDFLAGS) $(LIBS)
 747
 748 bin/smbmount@EXEEXT@: $(MOUNT_OBJ) bin/.dummy
 749         @echo Linking $@
 750         @$(CC) $(FLAGS) -o $@ $(MOUNT_OBJ) $(LDFLAGS) $(LIBS)
 751
 752 bin/smbmnt@EXEEXT@: $(MNT_OBJ) bin/.dummy
 753         @echo Linking $@
 754         @$(CC) $(FLAGS) -o $@ $(MNT_OBJ) $(LDFLAGS)
 755
 756 bin/smbumount@EXEEXT@: $(UMOUNT_OBJ) bin/.dummy
 757         @echo Linking $@
 758         @$(CC) $(FLAGS) -o $@ $(UMOUNT_OBJ) $(LDFLAGS)
 759
 760 bin/testparm@EXEEXT@: $(TESTPARM_OBJ) @BUILD_POPT@ bin/.dummy
 761         @echo Linking $@
 762         @$(CC) $(FLAGS) -o $@ $(TESTPARM_OBJ) $(LDFLAGS) $(LIBS) @BUILD_POPT@
 763
 764 bin/testprns@EXEEXT@: $(TESTPRNS_OBJ) bin/.dummy
 765         @echo Linking $@
 766         @$(CC) $(FLAGS) -o $@ $(TESTPRNS_OBJ) $(LDFLAGS) $(PRINTLIBS) $(LIBS)
 767
 768 bin/smbstatus@EXEEXT@: $(STATUS_OBJ) @BUILD_POPT@ bin/.dummy
 769         @echo Linking $@
 770         @$(CC) $(FLAGS) -o $@ $(STATUS_OBJ) $(LDFLAGS) $(LIBS) @BUILD_POPT@
 771
 772 bin/smbcontrol@EXEEXT@: $(SMBCONTROL_OBJ) bin/.dummy
 773         @echo Linking $@
 774         @$(CC) -DUSING_SMBCONTROL $(FLAGS) -o $@ $(SMBCONTROL_OBJ) $(LDFLAGS) $(LIBS)
 775
 776 bin/smbtree@EXEEXT@: $(SMBTREE_OBJ) bin/.dummy
 777         @echo Linking $@
 778         @$(CC) $(FLAGS) -o $@ $(SMBTREE_OBJ) $(LDFLAGS) $(LIBS)
 779
 780 bin/smbpasswd@EXEEXT@: $(SMBPASSWD_OBJ) bin/.dummy
 781         @echo Linking $@
 782         @$(CC) $(FLAGS) -o $@ $(SMBPASSWD_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS)
 783
 784 bin/pdbedit@EXEEXT@: $(PDBEDIT_OBJ) @BUILD_POPT@ bin/.dummy
 785         @echo Linking $@
 786         @$(CC) $(FLAGS) -o $@ $(PDBEDIT_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) @BUILD_POPT@
 787
 788 bin/samtest@EXEEXT@: $(SAMTEST_OBJ) @BUILD_POPT@ bin/.dummy
 789         @echo Linking $@
 790         @$(CC) $(FLAGS) -o $@ $(SAMTEST_OBJ) $(LDFLAGS) $(DYNEXP) $(TERMLDFLAGS) $(TERMLIBS) $(DYNEXP) $(LIBS) @BUILD_POPT@
 791
 792 bin/smbgroupedit@EXEEXT@: $(SMBGROUPEDIT_OBJ) bin/.dummy
 793         @echo Linking $@
 794         @$(CC) $(FLAGS) -o $@ $(SMBGROUPEDIT_OBJ) $(LDFLAGS) $(LIBS)
 795
 796 bin/nmblookup@EXEEXT@: $(NMBLOOKUP_OBJ) bin/.dummy
 797         @echo Linking $@
 798         @$(CC) $(FLAGS) -o $@ $(NMBLOOKUP_OBJ) $(LDFLAGS) $(LIBS)
 799
 800 bin/smbtorture@EXEEXT@: $(SMBTORTURE_OBJ) bin/.dummy
 801         @echo Linking $@
 802         @$(CC) $(FLAGS) -o $@ $(SMBTORTURE_OBJ) $(LDFLAGS) $(LIBS)
 803
 804 bin/talloctort@EXEEXT@: $(TALLOCTORT_OBJ) bin/.dummy
 805         @echo Linking $@
 806         @$(CC) $(FLAGS) -o $@ $(TALLOCTORT_OBJ) $(LDFLAGS) $(LIBS)
 807
 808 bin/masktest@EXEEXT@: $(MASKTEST_OBJ) bin/.dummy
 809         @echo Linking $@
 810         @$(CC) $(FLAGS) -o $@ $(MASKTEST_OBJ) $(LDFLAGS) $(LIBS)
 811
 812 bin/msgtest@EXEEXT@: $(MSGTEST_OBJ) bin/.dummy
 813         @echo Linking $@
 814         @$(CC) $(FLAGS) -o $@ $(MSGTEST_OBJ) $(LDFLAGS) $(LIBS)
 815
 816 bin/smbcacls@EXEEXT@: $(SMBCACLS_OBJ) bin/.dummy
 817         @echo Linking $@
 818         @$(CC) $(FLAGS) -o $@ $(SMBCACLS_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS)
 819
 820 bin/locktest@EXEEXT@: $(LOCKTEST_OBJ) bin/.dummy
 821         @echo Linking $@
 822         @$(CC) $(FLAGS) -o $@ $(LOCKTEST_OBJ) $(LDFLAGS) $(LIBS)
 823
 824 bin/nsstest@EXEEXT@: $(NSSTEST_OBJ) bin/.dummy
 825         @echo Linking $@
 826         @$(CC) $(FLAGS) -o $@ $(NSSTEST_OBJ) $(LDFLAGS) $(LIBS)
 827
 828 bin/vfstest@EXEEXT@: $(VFSTEST_OBJ) @BUILD_POPT@ bin/.dummy
 829         @echo Linking $@
 830         @$(CC) $(FLAGS) -o $@ $(VFSTEST_OBJ) $(LDFLAGS) $(TERMLDFLAGS) $(TERMLIBS) $(DYNEXP) $(PRINTLIBS) $(AUTHLIBS) $(LIBS) @BUILD_POPT@
 831
 832 bin/locktest2@EXEEXT@: $(LOCKTEST2_OBJ) bin/.dummy
 833         @echo Linking $@
 834         @$(CC) $(FLAGS) -o $@ $(LOCKTEST2_OBJ) $(LDFLAGS) $(LIBS)
 835
 836 bin/rpctorture@EXEEXT@: $(RPCTORTURE_OBJ) bin/.dummy
 837         @echo Linking $@
 838         @$(CC) $(FLAGS) -o $@ $(RPCTORTURE_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS)
 839
 840 bin/debug2html@EXEEXT@: $(DEBUG2HTML_OBJ) bin/.dummy
 841         @echo Linking $@
 842         @$(CC) $(FLAGS) -o $@ $(DEBUG2HTML_OBJ) $(LDFLAGS) $(LIBS)
 843
 844 bin/smbfilter@EXEEXT@: $(SMBFILTER_OBJ) bin/.dummy
 845         @echo Linking $@
 846         @$(CC) $(FLAGS) -o $@ $(SMBFILTER_OBJ) $(LDFLAGS) $(LIBS)
 847
 848 bin/smbw_sample@EXEEXT@: $(SMBW_OBJ) utils/smbw_sample.o bin/.dummy
 849         @echo Linking $@
 850         @$(CC) $(FLAGS) -o $@ $(SMBW_OBJ) utils/smbw_sample.o $(LDFLAGS) $(LIBS)
 851
 852 bin/smbsh@EXEEXT@: $(SMBSH_OBJ) bin/.dummy
 853         @echo Linking $@
 854         @$(CC) $(FLAGS) -o $@ $(SMBSH_OBJ) $(LDFLAGS) $(LIBS)
 855
 856 bin/smbwrapper.@SHLIBEXT@: $(PICOBJS) bin/.dummy
 857         @echo Linking shared library $@
 858         @$(SHLD) $(LDSHFLAGS) -o $@ $(PICOBJS) $(LIBS) \
 859                 @SONAMEFLAG@`basename $@`
 860
 861 bin/smbwrapper.32.@SHLIBEXT@: $(PICOBJS32)
 862         @echo Linking shared library $@
 863         @$(SHLD) -32 $(LDSHFLAGS) -o $@ $(PICOBJS32) $(LIBS) \
 864                 @SONAMEFLAG@`basename $@`
 865
 866 bin/libsmbclient.@SHLIBEXT@: $(LIBSMBCLIENT_PICOBJS)
 867         @echo Linking libsmbclient shared library $@
 868         $(SHLD) $(LDSHFLAGS) -o $@ $(LIBSMBCLIENT_PICOBJS) $(LDFLAGS) $(LIBS) \
 869                 @SONAMEFLAG@`basename $@`.$(LIBSMBCLIENT_MAJOR)
 870
 871 bin/libsmbclient.a: $(LIBSMBCLIENT_PICOBJS)
 872         @echo Linking libsmbclient non-shared library $@
 873         -$(AR) -rc $@ $(LIBSMBCLIENT_PICOBJS)
 874
 875 bin/libbigballofmud.@SHLIBEXT@: $(LIBBIGBALLOFMUD_PICOBJS)
 876         @echo Linking bigballofmud shared library $@
 877         $(SHLD) $(LDSHFLAGS) -o $@ $(LIBBIGBALLOFMUD_PICOBJS) $(LIBS) \
 878                 @SONAMEFLAG@`basename $@`.$(LIBBIGBALLOFMUD_MAJOR)
 879
 880 libsmbclient: bin/libsmbclient.a @LIBSMBCLIENT_SHARED@
 881
 882 bin/librpc_lsarpc.@SHLIBEXT@: $(RPC_LSA_OBJ)
 883         @echo "Linking $@"
 884         @$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_LSA_OBJ) -lc \
 885                 @SONAMEFLAG@`basename $@`
 886
 887 bin/librpc_samr.@SHLIBEXT@: $(RPC_SAMR_OBJ)
 888         @echo "Linking $@"
 889         @$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_SAMR_OBJ) -lc \
 890                 @SONAMEFLAG@`basename $@`
 891
 892 bin/librpc_srvsvc.@SHLIBEXT@: $(RPC_SVC_OBJ)
 893         @echo "Linking $@"
 894         @$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_SVC_OBJ) -lc \
 895                 @SONAMEFLAG@`basename $@`
 896
 897 bin/librpc_wkssvc.@SHLIBEXT@: $(RPC_WKS_OBJ)
 898         @echo "Linking $@"
 899         @$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_WKS_OBJ) -lc \
 900                 @SONAMEFLAG@`basename $@`
 901
 902 bin/librpc_NETLOGON.@SHLIBEXT@: $(RPC_NETLOG_OBJ)
 903         @echo "Linking $@"
 904         @$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_NETLOG_OBJ) -lc \
 905                 @SONAMEFLAG@`basename $@`
 906
 907 bin/librpc_winreg.@SHLIBEXT@: $(RPC_REG_OBJ)
 908         @echo "Linking $@"
 909         @$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_REG_OBJ) -lc \
 910                 @SONAMEFLAG@`basename $@`
 911
 912 bin/librpc_spoolss.@SHLIBEXT@: $(RPC_SPOOLSS_OBJ)
 913         @echo "Linking $@"
 914         @$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_SPOOLSS_OBJ) -lc \
 915                 @SONAMEFLAG@`basename $@`
 916
 917 bin/librpc_netdfs.@SHLIBEXT@: $(RPC_DFS_OBJ)
 918         @echo "Linking $@"
 919         @$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_DFS_OBJ) -lc \
 920                 @SONAMEFLAG@`basename $@`
 921
 922 nsswitch/libnss_wins.@SHLIBEXT@: $(NSS_OBJ)
 923         @echo "Linking $@"
 924         @$(SHLD) $(LDSHFLAGS) -o $@ $(NSS_OBJ) -lc \
 925                 @SONAMEFLAG@`basename $@`
 926
 927 bin/winbindd@EXEEXT@: $(WINBINDD_OBJ) bin/.dummy
 928         @echo Linking $@
 929         @$(LINK) -o $@ $(WINBINDD_OBJ) $(DYNEXP) $(LIBS)
 930
 931 nsswitch/libns_winbind.@SHLIBEXT@: $(WINBIND_NSS_PICOBJS)
 932         @echo "Linking $@"
 933         @$(SHLD) @LDSHFLAGS@ -o $@ $(WINBIND_NSS_PICOBJS) @WINBIND_NSS_EXTRA_LIBS@ \
 934                 @SONAMEFLAG@`basename $@`
 935
 936 nsswitch/libnss_winbind.@SHLIBEXT@: $(WINBIND_NSS_PICOBJS)
 937         @echo "Linking $@"
 938         @$(SHLD) $(LDSHFLAGS) -o $@ $(WINBIND_NSS_PICOBJS) @WINBIND_NSS_EXTRA_LIBS@ \
 939                 @SONAMEFLAG@`basename $@`
 940
 941 nsswitch/pam_winbind.@SHLIBEXT@: $(PAM_WINBIND_OBJ) bin/.dummy
 942         @echo Linking $@
 943         @$(SHLD) $(LDSHFLAGS) -o $@ $(PAM_WINBIND_OBJ) \
 944                 @SONAMEFLAG@`basename $@` -lpam
 945
 946 bin/mysql.@SHLIBEXT@: $(MYSQL_OBJ)
 947         @echo "Building plugin $@"
 948         @$(SHLD) $(LDSHFLAGS) -o $@ $(MYSQL_OBJ) @MYSQL_LIBS@ \
 949                 @SONAMEFLAG@`basename $@`
 950
 951 bin/developer.@SHLIBEXT@: $(DEVEL_HELP_OBJ)
 952         @echo "Building plugin $@"
 953         @$(SHLD) $(LDSHFLAGS) -o $@ $(DEVEL_HELP_OBJ) \
 954                 @SONAMEFLAG@`basename $@`
 955
 956 bin/xml.@SHLIBEXT@: $(XML_OBJ)
 957         @echo "Building plugin $@"
 958         @$(SHLD) $(LDSHFLAGS) -o $@ $(XML_OBJ) @XML_LIBS@ \
 959                 @SONAMEFLAG@`basename $@`
 960
 961 bin/vfs_audit.@SHLIBEXT@: $(VFS_AUDIT_OBJ)
 962         @echo "Building plugin $@"
 963         @$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_AUDIT_OBJ) \
 964                 @SONAMEFLAG@`basename $@`
 965
 966 bin/vfs_extd_audit.@SHLIBEXT@: $(VFS_EXTD_AUDIT_OBJ)
 967         @echo "Building plugin $@"
 968         @$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_AUDIT_OBJ) \
 969                 @SONAMEFLAG@`basename $@`
 970
 971 bin/vfs_recycle.@SHLIBEXT@: $(VFS_RECYCLE_OBJ)
 972         @echo "Building plugin $@"
 973         @$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_RECYCLE_OBJ) \
 974                 @SONAMEFLAG@`basename $@`
 975
 976 bin/vfs_netatalk.@SHLIBEXT@: $(VFS_NETATALK_OBJ)
 977         @echo "Building plugin $@"
 978         @$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_NETATALK_OBJ) \
 979                 @SONAMEFLAG@`basename $@`
 980
 981 bin/vfs_fake_perms.@SHLIBEXT@: $(VFS_FAKE_PERMS_OBJ)
 982         @echo "Building plugin $@"
 983         @$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_FAKE_PERMS_OBJ) \
 984                 @SONAMEFLAG@`basename $@`
 985
 986 bin/wbinfo@EXEEXT@: $(WBINFO_OBJ) $(PARAM_OBJ) $(LIB_OBJ) \
 987                 $(UBIQX_OBJ) $(SECRETS_OBJ) @BUILD_POPT@ bin/.dummy
 988         @echo Linking $@
 989         @$(LINK) -o $@ $(WBINFO_OBJ) $(PARAM_OBJ) $(LIB_OBJ) \
 990                 $(UBIQX_OBJ) $(SECRETS_OBJ) $(LIBS) @BUILD_POPT@
 991
 992 bin/ntlm_auth@EXEEXT@: $(NTLM_AUTH_OBJ) $(PARAM_OBJ) $(LIB_OBJ) \
 993                 $(UBIQX_OBJ) @BUILD_POPT@ bin/.dummy
 994         @echo Linking $@
 995         @$(LINK) -o $@ $(NTLM_AUTH_OBJ) $(PARAM_OBJ) $(LIB_OBJ) \
 996                 $(UBIQX_OBJ) $(LIBS) @BUILD_POPT@
 997
 998 bin/pam_smbpass.@SHLIBEXT@: $(PAM_SMBPASS_PICOOBJ)
 999         @echo "Linking shared library $@"
1000         $(SHLD) $(LDSHFLAGS) -o $@ $(PAM_SMBPASS_PICOOBJ) -lpam $(DYNEXP) $(LIBS) -lc
1001
1002 bin/libmsrpc.a: $(LIBMSRPC_PICOBJ)
1003         -$(AR) -rc $@ $(LIBMSRPC_PICOBJ)
1004
1005 bin/tdbbackup@EXEEXT@: $(TDBBACKUP_OBJ) bin/.dummy
1006         @echo Linking $@
1007         @$(CC) $(FLAGS) -o $@ $(TDBBACKUP_OBJ)
1008
1009 install: installbin installman installscripts installdat installswat
1010
1011 # DESTDIR is used here to prevent packagers wasting their time
1012 # duplicating the Makefile. Remove it and you will have the privelege
1013 # of package each samba release for muliple versions of multiple
1014 # distributions and operating systems, or at least supplying patches
1015 # to all the packaging files required for this, prior to committing
1016 # the removal of DESTDIR. Do not remove it even though you think it
1017 # is not used
1018
1019 installdirs:
1020         @$(SHELL) $(srcdir)/script/installdirs.sh $(DESTDIR)$(BASEDIR) $(DESTDIR)$(BINDIR) $(DESTDIR)$(SBINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(DESTDIR)$(PRIVATEDIR) $(DESTDIR)$(VFSLIBDIR) $(DESTDIR)$(PDBLIBDIR) $(DESTDIR)$(PIDDIR) $(DESTDIR)$(LOCKDIR)
1021
1022 installservers: all installdirs
1023         @$(SHELL) $(srcdir)/script/installbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(SBINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(SBIN_PROGS)
1024
1025 installbin: all installdirs
1026         @$(SHELL) $(srcdir)/script/installbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(SBINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(SBIN_PROGS)
1027         @$(SHELL) $(srcdir)/script/installbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(BINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(BIN_PROGS)
1028
1029         @$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(RPCLIBDIR) $(RPC_MODULES)
1030
1031 installmodules: all installdirs
1032         @$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(VFSLIBDIR) $(VFS_MODULES)
1033         @$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(PDBLIBDIR) $(PDB_MODULES)
1034
1035 installscripts: installdirs
1036         @$(SHELL) $(srcdir)/script/installscripts.sh $(INSTALLPERMS) $(DESTDIR)$(BINDIR) $(SCRIPTS)
1037
1038 installdat: installdirs
1039         @$(SHELL) $(srcdir)/script/installdat.sh $(DESTDIR)$(LIBDIR) $(srcdir)
1040
1041 installswat: installdirs
1042         @$(SHELL) $(srcdir)/script/installswat.sh $(DESTDIR)$(SWATDIR) $(srcdir)
1043
1044 installclientlib:
1045         -$(INSTALLCLIENTCMD_SH) bin/libsmbclient.@SHLIBEXT@ $(DESTDIR)${prefix}/lib
1046         -$(INSTALLCLIENTCMD_A) bin/libsmbclient.a $(DESTDIR)${prefix}/lib
1047         -$(INSTALLCMD) -d $(DESTDIR)${prefix}/include
1048         -$(INSTALLCMD) include/libsmbclient.h $(DESTDIR)${prefix}/include
1049
1050 # Python extensions
1051
1052 PYTHON_OBJS = $(LIB_OBJ) $(LIBSMB_OBJ) $(RPC_PARSE_OBJ) $(UBIQX_OBJ) \
1053         $(PARAM_OBJ) $(LIBMSRPC_OBJ) $(PASSDB_OBJ) $(GROUPDB_OBJ) $(SECRETS_OBJ)
1054
1055 PY_SPOOLSS_PROTO_OBJ = python/py_spoolss.o \
1056                 python/py_spoolss_printers.o python/py_spoolss_printers_conv.o\
1057                 python/py_spoolss_forms.o python/py_spoolss_forms_conv.o \
1058                 python/py_spoolss_ports.o python/py_spoolss_ports_conv.o \
1059                 python/py_spoolss_drivers.o python/py_spoolss_drivers_conv.o \
1060                 python/py_spoolss_jobs.o python/py_spoolss_jobs_conv.o \
1061                 python/py_spoolss_printerdata.o
1062
1063 PY_LSA_PROTO_OBJ = python/py_lsa.o
1064
1065 PY_COMMON_PROTO_OBJ = python/py_common.c python/py_ntsec.c
1066
1067 python_proto: python_spoolss_proto python_lsa_proto python_common_proto
1068
1069 python_spoolss_proto:
1070         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
1071                 -h _PY_SPOOLSS_PROTO_H python/py_spoolss_proto.h \
1072                 $(PY_SPOOLSS_PROTO_OBJ)
1073
1074 python_lsa_proto:
1075         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
1076                 -h _PY_LSA_PROTO_H python/py_lsa_proto.h \
1077                 $(PY_LSA_PROTO_OBJ)
1078
1079 python_common_proto:
1080         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
1081                 -h _PY_COMMON_PROTO_H python/py_common_proto.h \
1082                 $(PY_COMMON_PROTO_OBJ)
1083
1084 python_ext: $(PYTHON_OBJS)
1085         @if test -z "$(PYTHON)"; then \
1086                 echo Use the option --with-python to configure python; \
1087                 exit 1; fi
1088         PYTHON_OBJS="$(PYTHON_OBJS)" PYTHON_CFLAGS="$(CFLAGS) $(CPPFLAGS) $(FLAGS)" \
1089         LIBS="$(LIBS)" \
1090                 $(PYTHON) python/setup.py build
1091
1092 python_install: $(PYTHON_OBJS)
1093         @if test -z "$(PYTHON)"; then \
1094                 echo Use the option --with-python to configure python; \
1095                 exit 1; fi
1096         PYTHON_OBJS="$(PYTHON_OBJS)" PYTHON_CFLAGS="$(CFLAGS) $(CPPFLAGS)" \
1097         LIBS="$(LIBS)" \
1098                 $(PYTHON) python/setup.py install
1099
1100 python_clean:
1101         @if test -n "$(PYTHON)"; then $(PYTHON) python/setup.py clean; fi
1102
1103 # revert to the previously installed version
1104 revert:
1105         @$(SHELL) $(srcdir)/script/revert.sh $(SBINDIR) $(SBIN_PROGS)
1106         @$(SHELL) $(srcdir)/script/revert.sh $(BINDIR) $(BIN_PROGS) $(SCRIPTS)
1107
1108 installman:
1109         @$(SHELL) $(srcdir)/script/installman.sh $(DESTDIR)$(MANDIR) $(srcdir) $(man_langs) "@ROFF@"
1110
1111 .PHONY: showlayout
1112
1113 showlayout:
1114         @echo "Samba will be installed into:"
1115         @echo "  basedir: $(BASEDIR)"
1116         @echo "  bindir:  $(BINDIR)"
1117         @echo "  sbindir: $(SBINDIR)"
1118         @echo "  libdir:  $(LIBDIR)"
1119         @echo "  vardir:  $(VARDIR)"
1120         @echo "  mandir:  $(MANDIR)"
1121
1122
1123 uninstall: uninstallman uninstallbin uninstallscripts
1124
1125 uninstallman:
1126         @$(SHELL) $(srcdir)/script/uninstallman.sh $(DESTDIR)$(MANDIR) $(srcdir) $(man_langs)
1127
1128 uninstallbin:
1129         @$(SHELL) $(srcdir)/script/uninstallbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(SBINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(DESTDIR)$(SBIN_PROGS)
1130         @$(SHELL) $(srcdir)/script/uninstallbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(BINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(DESTDIR)$(BIN_PROGS)
1131         @$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(RPCLIBDIR) $(DESTDIR)$(RPC_MODULES)
1132
1133 uninstallmodules:
1134         @$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(VFSLIBDIR) $(DESTDIR)$(VFS_MODULES)
1135         @$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(PDBLIBDIR) $(DESTDIR)$(PDB_MODULES)
1136         @$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(MODULES)
1137
1138 uninstallscripts:
1139         @$(SHELL) $(srcdir)/script/uninstallscripts.sh $(INSTALLPERMS) $(DESTDIR)$(BINDIR) $(SCRIPTS)
1140
1141 # Toplevel clean files
1142 TOPFILES=dynconfig.o dynconfig.po
1143
1144 clean: delheaders python_clean
1145         -rm -f core */*~ *~ */*.o */*.po */*.po32 */*.@SHLIBEXT@ \
1146                 $(TOPFILES) $(BIN_PROGS) $(SBIN_PROGS) $(MODULES) $(TORTURE_PROGS) .headers.stamp
1147
1148 # Making this target will just make sure that the prototype files
1149 # exist, not necessarily that they are up to date.  Since they're
1150 # removed by "make clean" this will always be run when you do anything
1151 # afterwards.
1152 proto_exists: include/proto.h include/wrepld_proto.h include/build_env.h \
1153         nsswitch/winbindd_proto.h web/swat_proto.h \
1154         client/client_proto.h utils/net_proto.h \
1155         include/tdbsam2_parse_info.h
1156
1157 delheaders:
1158         @echo Removing prototype headers
1159         @/bin/rm -f $(srcdir)/include/proto.h $(srcdir)/include/build_env.h
1160         @/bin/rm -f $(srcdir)/include/wrepld_proto.h $(srcdir)/nsswitch/winbindd_proto.h
1161         @/bin/rm -f $(srcdir)/web/swat_proto.h
1162         @/bin/rm -f $(srcdir)/client/client_proto.h $(srcdir)/utils/net_proto.h
1163         @/bin/rm -f $(srcdir)/include/tdbsam2_parse_info.h
1164
1165         @/bin/rm -f include/proto.h include/build_env.h include/wrepld_proto.h \
1166                     nsswitch/winbindd_proto.h web/swat_proto.h \
1167                     client/client_proto.h utils/net_proto.h \
1168                     include/tdbsam2_parse_info.h
1169
1170 include/proto.h:
1171         @echo Building include/proto.h
1172         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
1173           -h _PROTO_H_ $(builddir)/include/proto.h \
1174           $(PROTO_OBJ)
1175
1176 include/build_env.h:
1177         @echo Building include/build_env.h
1178         @cd $(srcdir) && $(SHELL) script/build_env.sh $(srcdir) $(builddir) $(CC) > $(builddir)/include/build_env.h
1179
1180 include/wrepld_proto.h:
1181         @echo Building include/wrepld_proto.h
1182         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
1183           -h _WREPLD_PROTO_H_ $(builddir)/include/wrepld_proto.h \
1184           $(WREPL_OBJ1)
1185
1186 nsswitch/winbindd_proto.h:
1187         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
1188           -h _WINBINDD_PROTO_H_ nsswitch/winbindd_proto.h \
1189           $(WINBINDD_OBJ1)
1190
1191 web/swat_proto.h:
1192         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
1193           -h _SWAT_PROTO_H_ web/swat_proto.h \
1194           $(SWAT_OBJ1)
1195
1196 client/client_proto.h:
1197         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
1198           -h _CLIENT_PROTO_H_ client/client_proto.h \
1199           $(CLIENT_OBJ1)
1200
1201 utils/net_proto.h:
1202         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
1203           -h _CLIENT_PROTO_H_ utils/net_proto.h \
1204           $(NET_OBJ1)
1205
1206 include/tdbsam2_parse_info.h:
1207         @cd $(srcdir) && @PERL@ -w script/genstruct.pl \
1208         -o include/tdbsam2_parse_info.h $(CC) -E -O2 -g \
1209         include/tdbsam2.h
1210
1211 # "make headers" or "make proto" calls a subshell because we need to
1212 # make sure these commands are executed in sequence even for a
1213 # parallel make.
1214 headers:
1215         $(MAKE) delheaders; \
1216         $(MAKE) include/proto.h; \
1217         $(MAKE) include/build_env.h; \
1218         $(MAKE) include/wrepld_proto.h; \
1219         $(MAKE) nsswitch/winbindd_proto.h; \
1220         $(MAKE) web/swat_proto.h; \
1221         $(MAKE) client/client_proto.h; \
1222         $(MAKE) utils/net_proto.h; \
1223         $(MAKE) include/tdbsam2_parse_info.h
1224
1225 proto: headers
1226
1227 .PHONY: headers proto
1228
1229 etags:
1230         etags `find $(srcdir) -name "*.[ch]" | grep -v /CVS/`
1231
1232 ctags:
1233         ctags `find $(srcdir) -name "*.[ch]" | grep -v /CVS/`
1234
1235 realclean: clean delheaders
1236         -rm -f config.log $(BIN_PROGS) $(MODULES) $(SBIN_PROGS) bin/.dummy script/findsmb
1237
1238 distclean: realclean
1239         -rm -f include/stamp-h
1240         -rm -f include/config.h Makefile
1241         -rm -f config.status config.cache so_locations
1242         -rm -rf .deps
1243
1244 # this target is really just for my use. It only works on a limited
1245 # range of machines and is used to produce a list of potentially
1246 # dead (ie. unused) functions in the code. (tridge)
1247 finddead:
1248         nm */*.o |grep 'U ' | awk '{print $$2}' | sort -u > nmused.txt
1249         nm */*.o |grep 'T ' | awk '{print $$3}' | sort -u > nmfns.txt
1250         comm -13 nmused.txt nmfns.txt
1251
1252
1253 # when configure.in is updated, reconfigure
1254 $(srcdir)/configure: $(srcdir)/configure.in
1255         @echo "WARNING: you need to rerun autoconf"
1256
1257 config.status: $(srcdir)/configure
1258         @echo "WARNING: you need to run configure"
1259
1260 Makefile: $(srcdir)/Makefile.in config.status
1261         @echo "WARNING: you need to run ./config.status"
1262
1263 test_prefix=/tmp/test-samba
1264 # Run regression suite using the external "satyr" framework
1265 check:
1266         @echo "** Sorry, samba self-test without installation does not work "
1267         @echo "** yet.  Please try specifying a scratch directory to"
1268         @echo "**       ./configure --prefix DIR"
1269         @echo "** then run \"make install installcheck\""
1270         exit 1
1271
1272 #       -rm -rf $(test_prefix)/lib
1273 #       mkdir $(test_prefix)/lib -p ./testdir
1274 #       PATH=$(builddir)/bin:$(PATH) \
1275 #       SATYR_SUITEDIR=../testsuite/build_farm/ prefix=$(test_prefix) \
1276 #       testdir=./testdir $(SHELL) satyr
1277
1278 # Run regression suite on the installed version.
1279
1280 # `installcheck'
1281 #      Perform installation tests (if any).  The user must build and
1282 #      install the program before running the tests.  You should not
1283 #      assume that `$(bindir)' is in the search path.
1284
1285 dangerous-installcheck:
1286         mkdir -p $(BASEDIR)/lib
1287         mkdir -p $(BASEDIR)/var
1288         PATH=$(BINDIR):$(SBINDIR):$(PATH) \
1289         SATYR_DISCOURAGE=1 \
1290         SATYR_SUITEDIR=../testsuite/satyr/ prefix=$(BASEDIR) \
1291         LIBSMB_PROG=$(SBINDIR)/smbd \
1292         testdir=./testdir $(SHELL) satyr