selftest/target/Samba3.pm

   1 #!/usr/bin/perl
   2 # Bootstrap Samba and run a number of tests against it.
   3 # Copyright (C) 2005-2007 Jelmer Vernooij <jelmer@samba.org>
   4 # Published under the GNU GPL, v3 or later.
   5
   6 package Samba3;
   7
   8 use strict;
   9 use Cwd qw(abs_path);
  10 use FindBin qw($RealBin);
  11 use POSIX;
  12 use target::Samba;
  13
  14 sub have_ads($) {
  15         my ($self) = @_;
  16         my $found_ads = 0;
  17         my $smbd_build_options = Samba::bindir_path($self, "smbd") . " -b|";
  18         open(IN, $smbd_build_options) or die("Unable to run $smbd_build_options: $!");
  19
  20         while (<IN>) {
  21                 if (/WITH_ADS/) {
  22                        $found_ads = 1;
  23                 }
  24         }
  25         close IN;
  26
  27         # If we were not built with ADS support, pretend we were never even available
  28         print "smbd does not have ADS support\n" unless $found_ads;
  29         return $found_ads;
  30 }
  31
  32 # return smb.conf parameters applicable to @path, based on the underlying
  33 # filesystem type
  34 sub get_fs_specific_conf($$)
  35 {
  36         my ($self, $path) = @_;
  37         my $mods = "";
  38         my $stat_out = `stat --file-system $path` or return "";
  39
  40         if ($stat_out =~ m/Type:\s+btrfs/) {
  41                 $mods .= "btrfs ";
  42         }
  43
  44         if ($mods) {
  45                 return "vfs objects = $mods";
  46         }
  47
  48         return undef;
  49 }
  50
  51 sub new($$) {
  52         my ($classname, $bindir, $srcdir, $server_maxtime) = @_;
  53         my $self = { vars => {},
  54                      bindir => $bindir,
  55                      srcdir => $srcdir,
  56                      server_maxtime => $server_maxtime
  57         };
  58         bless $self;
  59         return $self;
  60 }
  61
  62 sub teardown_env($$)
  63 {
  64         my ($self, $envvars) = @_;
  65         my $count = 0;
  66
  67         # This should cause smbd to terminate gracefully
  68         close($envvars->{STDIN_PIPE});
  69
  70         my $smbdpid = $envvars->{SMBD_TL_PID};
  71         my $nmbdpid = $envvars->{NMBD_TL_PID};
  72         my $winbinddpid = $envvars->{WINBINDD_TL_PID};
  73
  74         # This should give it time to write out the gcov data
  75         until ($count > 20) {
  76             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  77             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
  78             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
  79             if ($smbdchild == -1
  80                 && $nmbdchild == -1
  81                 && $winbinddchild == -1) {
  82                 last;
  83             }
  84             sleep(1);
  85             $count++;
  86         }
  87
  88         if ($count <= 20 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
  89             return;
  90         }
  91
  92         $self->stop_sig_term($smbdpid);
  93         $self->stop_sig_term($nmbdpid);
  94         $self->stop_sig_term($winbinddpid);
  95
  96         $count = 0;
  97         until ($count > 10) {
  98             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  99             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
 100             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
 101             if ($smbdchild == -1
 102                 && $nmbdchild == -1
 103                 && $winbinddchild == -1) {
 104                 last;
 105             }
 106             sleep(1);
 107             $count++;
 108         }
 109
 110         if ($count <= 10 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
 111             return;
 112         }
 113
 114         warn("timelimit process did not quit on SIGTERM, sending SIGKILL");
 115         $self->stop_sig_kill($smbdpid);
 116         $self->stop_sig_kill($nmbdpid);
 117         $self->stop_sig_kill($winbinddpid);
 118
 119         return 0;
 120 }
 121
 122 sub getlog_env_app($$$)
 123 {
 124         my ($self, $envvars, $name) = @_;
 125
 126         my $title = "$name LOG of: $envvars->{NETBIOSNAME}\n";
 127         my $out = $title;
 128
 129         open(LOG, "<".$envvars->{$name."_TEST_LOG"});
 130
 131         seek(LOG, $envvars->{$name."_TEST_LOG_POS"}, SEEK_SET);
 132         while (<LOG>) {
 133                 $out .= $_;
 134         }
 135         $envvars->{$name."_TEST_LOG_POS"} = tell(LOG);
 136         close(LOG);
 137
 138         return "" if $out eq $title;
 139
 140         return $out;
 141 }
 142
 143 sub getlog_env($$)
 144 {
 145         my ($self, $envvars) = @_;
 146         my $ret = "";
 147
 148         $ret .= $self->getlog_env_app($envvars, "SMBD");
 149         $ret .= $self->getlog_env_app($envvars, "NMBD");
 150         $ret .= $self->getlog_env_app($envvars, "WINBINDD");
 151
 152         return $ret;
 153 }
 154
 155 sub check_env($$)
 156 {
 157         my ($self, $envvars) = @_;
 158
 159         my $childpid = waitpid(-1, WNOHANG);
 160
 161         # TODO ...
 162         return 1;
 163 }
 164
 165 sub setup_env($$$)
 166 {
 167         my ($self, $envname, $path) = @_;
 168
 169         $ENV{ENVNAME} = $envname;
 170
 171         if (defined($self->{vars}->{$envname})) {
 172                 return $self->{vars}->{$envname};
 173         }
 174
 175         if ($envname eq "nt4_dc") {
 176                 return $self->setup_nt4_dc("$path/nt4_dc");
 177         } elsif ($envname eq "nt4_dc_schannel") {
 178                 return $self->setup_nt4_dc_schannel("$path/nt4_dc_schannel");
 179         } elsif ($envname eq "simpleserver") {
 180                 return $self->setup_simpleserver("$path/simpleserver");
 181         } elsif ($envname eq "maptoguest") {
 182                 return $self->setup_maptoguest("$path/maptoguest");
 183         } elsif ($envname eq "ktest") {
 184                 return $self->setup_ktest("$path/ktest");
 185         } elsif ($envname eq "nt4_member") {
 186                 if (not defined($self->{vars}->{nt4_dc})) {
 187                         if (not defined($self->setup_nt4_dc("$path/nt4_dc"))) {
 188                                 return undef;
 189                         }
 190                 }
 191                 return $self->setup_nt4_member("$path/nt4_member", $self->{vars}->{nt4_dc});
 192         } else {
 193                 return "UNKNOWN";
 194         }
 195 }
 196
 197 sub setup_nt4_dc($$)
 198 {
 199         my ($self, $path) = @_;
 200
 201         print "PROVISIONING NT4 DC...";
 202
 203         my $nt4_dc_options = "
 204         domain master = yes
 205         domain logons = yes
 206         lanman auth = yes
 207
 208         rpc_server:epmapper = external
 209         rpc_server:spoolss = external
 210         rpc_server:lsarpc = external
 211         rpc_server:samr = external
 212         rpc_server:netlogon = external
 213         rpc_server:register_embedded_np = yes
 214         rpc_server:FssagentRpc = external
 215
 216         rpc_daemon:epmd = fork
 217         rpc_daemon:spoolssd = fork
 218         rpc_daemon:lsasd = fork
 219         rpc_daemon:fssd = fork
 220         fss: sequence timeout = 1
 221 ";
 222
 223         my $vars = $self->provision($path,
 224                                     "LOCALNT4DC2",
 225                                     "localntdc2pass",
 226                                     $nt4_dc_options);
 227
 228         $vars or return undef;
 229
 230         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 231                return undef;
 232         }
 233
 234         $vars->{DC_SERVER} = $vars->{SERVER};
 235         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 236         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 237         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 238         $vars->{DC_USERNAME} = $vars->{USERNAME};
 239         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 240
 241         $self->{vars}->{nt4_dc} = $vars;
 242
 243         return $vars;
 244 }
 245
 246 sub setup_nt4_dc_schannel($$)
 247 {
 248         my ($self, $path) = @_;
 249
 250         print "PROVISIONING NT4 DC WITH SERVER SCHANNEL ...";
 251
 252         my $pdc_options = "
 253         domain master = yes
 254         domain logons = yes
 255         lanman auth = yes
 256
 257         rpc_server:epmapper = external
 258         rpc_server:spoolss = external
 259         rpc_server:lsarpc = external
 260         rpc_server:samr = external
 261         rpc_server:netlogon = external
 262         rpc_server:register_embedded_np = yes
 263
 264         rpc_daemon:epmd = fork
 265         rpc_daemon:spoolssd = fork
 266         rpc_daemon:lsasd = fork
 267
 268         server schannel = yes
 269 ";
 270
 271         my $vars = $self->provision($path,
 272                                     "LOCALNT4DC9",
 273                                     "localntdc9pass",
 274                                     $pdc_options);
 275
 276         $vars or return undef;
 277
 278         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 279                return undef;
 280         }
 281
 282         $vars->{DC_SERVER} = $vars->{SERVER};
 283         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 284         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 285         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 286         $vars->{DC_USERNAME} = $vars->{USERNAME};
 287         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 288
 289         $self->{vars}->{nt4_dc_schannel} = $vars;
 290
 291         return $vars;
 292 }
 293
 294 sub setup_nt4_member($$$)
 295 {
 296         my ($self, $prefix, $nt4_dc_vars) = @_;
 297         my $count = 0;
 298         my $rc;
 299
 300         print "PROVISIONING MEMBER...";
 301
 302         my $member_options = "
 303         security = domain
 304         server signing = on
 305         dbwrap_tdb_mutexes:* = yes
 306 ";
 307         my $ret = $self->provision($prefix,
 308                                    "LOCALNT4MEMBER3",
 309                                    "localnt4member3pass",
 310                                    $member_options);
 311
 312         $ret or return undef;
 313
 314         my $nmblookup = Samba::bindir_path($self, "nmblookup");
 315         do {
 316                 print "Waiting for the LOGON SERVER registration ...\n";
 317                 $rc = system("$nmblookup $ret->{CONFIGURATION} $ret->{DOMAIN}\#1c");
 318                 if ($rc != 0) {
 319                         sleep(1);
 320                 }
 321                 $count++;
 322         } while ($rc != 0 && $count < 10);
 323         if ($count == 10) {
 324                 print "NMBD not reachable after 10 retries\n";
 325                 teardown_env($self, $ret);
 326                 return 0;
 327         }
 328
 329         my $net = Samba::bindir_path($self, "net");
 330         my $cmd = "";
 331         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 332         $cmd .= "$net join $ret->{CONFIGURATION} $nt4_dc_vars->{DOMAIN} member";
 333         $cmd .= " -U$nt4_dc_vars->{USERNAME}\%$nt4_dc_vars->{PASSWORD}";
 334
 335         if (system($cmd) != 0) {
 336             warn("Join failed\n$cmd");
 337             return undef;
 338         }
 339
 340         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 341                return undef;
 342         }
 343
 344         $ret->{DC_SERVER} = $nt4_dc_vars->{SERVER};
 345         $ret->{DC_SERVER_IP} = $nt4_dc_vars->{SERVER_IP};
 346         $ret->{DC_SERVER_IPV6} = $nt4_dc_vars->{SERVER_IPV6};
 347         $ret->{DC_NETBIOSNAME} = $nt4_dc_vars->{NETBIOSNAME};
 348         $ret->{DC_USERNAME} = $nt4_dc_vars->{USERNAME};
 349         $ret->{DC_PASSWORD} = $nt4_dc_vars->{PASSWORD};
 350
 351         return $ret;
 352 }
 353
 354 sub setup_admember($$$$)
 355 {
 356         my ($self, $prefix, $dcvars) = @_;
 357
 358         # If we didn't build with ADS, pretend this env was never available
 359         if (not $self->have_ads()) {
 360                 return "UNKNOWN";
 361         }
 362
 363         print "PROVISIONING S3 AD MEMBER...";
 364
 365         my $member_options = "
 366         security = ads
 367         server signing = on
 368         workgroup = $dcvars->{DOMAIN}
 369         realm = $dcvars->{REALM}
 370 ";
 371
 372         my $ret = $self->provision($prefix,
 373                                    "LOCALADMEMBER",
 374                                    "loCalMemberPass",
 375                                    $member_options,
 376                                    $dcvars->{SERVER_IP},
 377                                    $dcvars->{SERVER_IPV6});
 378
 379         $ret or return undef;
 380
 381         close(USERMAP);
 382         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 383         $ret->{REALM} = $dcvars->{REALM};
 384
 385         my $ctx;
 386         my $prefix_abs = abs_path($prefix);
 387         $ctx = {};
 388         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 389         $ctx->{domain} = $dcvars->{DOMAIN};
 390         $ctx->{realm} = $dcvars->{REALM};
 391         $ctx->{dnsname} = lc($dcvars->{REALM});
 392         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 393         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 394         Samba::mk_krb5_conf($ctx, "");
 395
 396         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 397
 398         my $net = Samba::bindir_path($self, "net");
 399         my $cmd = "";
 400         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 401         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 402                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 403         } else {
 404                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 405         }
 406         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 407         $cmd .= "$net join $ret->{CONFIGURATION}";
 408         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 409
 410         if (system($cmd) != 0) {
 411             warn("Join failed\n$cmd");
 412             return undef;
 413         }
 414
 415         # We need world access to this share, as otherwise the domain
 416         # administrator from the AD domain provided by Samba4 can't
 417         # access the share for tests.
 418         chmod 0777, "$prefix/share";
 419
 420         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 421                 return undef;
 422         }
 423
 424         $ret->{DC_SERVER} = $dcvars->{SERVER};
 425         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 426         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 427         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 428         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 429         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 430
 431         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 432         $ret->{target} = $self;
 433
 434         return $ret;
 435 }
 436
 437 sub setup_admember_rfc2307($$$$)
 438 {
 439         my ($self, $prefix, $dcvars) = @_;
 440
 441         # If we didn't build with ADS, pretend this env was never available
 442         if (not $self->have_ads()) {
 443                 return "UNKNOWN";
 444         }
 445
 446         print "PROVISIONING S3 AD MEMBER WITH idmap_rfc2307 config...";
 447
 448         my $member_options = "
 449         security = ads
 450         server signing = on
 451         workgroup = $dcvars->{DOMAIN}
 452         realm = $dcvars->{REALM}
 453         idmap config $dcvars->{DOMAIN} : backend = rfc2307
 454         idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
 455         idmap config $dcvars->{DOMAIN} : ldap_server = ad
 456         idmap config $dcvars->{DOMAIN} : bind_path_user = ou=idmap,dc=samba,dc=example,dc=com
 457         idmap config $dcvars->{DOMAIN} : bind_path_group = ou=idmap,dc=samba,dc=example,dc=com
 458 ";
 459
 460         my $ret = $self->provision($prefix,
 461                                    "RFC2307MEMBER",
 462                                    "loCalMemberPass",
 463                                    $member_options,
 464                                    $dcvars->{SERVER_IP},
 465                                    $dcvars->{SERVER_IPV6});
 466
 467         $ret or return undef;
 468
 469         close(USERMAP);
 470         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 471         $ret->{REALM} = $dcvars->{REALM};
 472
 473         my $ctx;
 474         my $prefix_abs = abs_path($prefix);
 475         $ctx = {};
 476         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 477         $ctx->{domain} = $dcvars->{DOMAIN};
 478         $ctx->{realm} = $dcvars->{REALM};
 479         $ctx->{dnsname} = lc($dcvars->{REALM});
 480         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 481         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 482         Samba::mk_krb5_conf($ctx, "");
 483
 484         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 485
 486         my $net = Samba::bindir_path($self, "net");
 487         my $cmd = "";
 488         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 489         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 490                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 491         } else {
 492                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 493         }
 494         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 495         $cmd .= "$net join $ret->{CONFIGURATION}";
 496         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 497
 498         if (system($cmd) != 0) {
 499             warn("Join failed\n$cmd");
 500             return undef;
 501         }
 502
 503         # We need world access to this share, as otherwise the domain
 504         # administrator from the AD domain provided by Samba4 can't
 505         # access the share for tests.
 506         chmod 0777, "$prefix/share";
 507
 508         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 509                 return undef;
 510         }
 511
 512         $ret->{DC_SERVER} = $dcvars->{SERVER};
 513         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 514         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 515         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 516         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 517         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 518
 519         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 520         $ret->{target} = $self;
 521
 522         return $ret;
 523 }
 524
 525 sub setup_simpleserver($$)
 526 {
 527         my ($self, $path) = @_;
 528
 529         print "PROVISIONING server with security=share...";
 530
 531         my $prefix_abs = abs_path($path);
 532
 533         my $simpleserver_options = "
 534         lanman auth = yes
 535         vfs objects = xattr_tdb streams_depot
 536
 537 [vfs_aio_fork]
 538         path = $prefix_abs/share
 539         vfs objects = aio_fork
 540         read only = no
 541         vfs_aio_fork:erratic_testing_mode=yes
 542 ";
 543
 544         my $vars = $self->provision($path,
 545                                     "LOCALSHARE4",
 546                                     "local4pass",
 547                                     $simpleserver_options);
 548
 549         $vars or return undef;
 550
 551         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 552                return undef;
 553         }
 554
 555         $self->{vars}->{simpleserver} = $vars;
 556
 557         return $vars;
 558 }
 559
 560 sub setup_ktest($$$)
 561 {
 562         my ($self, $prefix) = @_;
 563
 564         # If we didn't build with ADS, pretend this env was never available
 565         if (not $self->have_ads()) {
 566                 return "UNKNOWN";
 567         }
 568
 569         print "PROVISIONING server with security=ads...";
 570
 571         my $ktest_options = "
 572         workgroup = KTEST
 573         realm = ktest.samba.example.com
 574         security = ads
 575         username map = $prefix/lib/username.map
 576         server signing = required
 577 ";
 578
 579         my $ret = $self->provision($prefix,
 580                                    "LOCALKTEST6",
 581                                    "localktest6pass",
 582                                    $ktest_options);
 583
 584         $ret or return undef;
 585
 586         my $ctx;
 587         my $prefix_abs = abs_path($prefix);
 588         $ctx = {};
 589         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 590         $ctx->{domain} = "KTEST";
 591         $ctx->{realm} = "KTEST.SAMBA.EXAMPLE.COM";
 592         $ctx->{dnsname} = lc($ctx->{realm});
 593         $ctx->{kdc_ipv4} = "0.0.0.0";
 594         $ctx->{kdc_ipv6} = "::";
 595         Samba::mk_krb5_conf($ctx, "");
 596
 597         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 598
 599         open(USERMAP, ">$prefix/lib/username.map") or die("Unable to open $prefix/lib/username.map");
 600         print USERMAP "
 601 $ret->{USERNAME} = KTEST\\Administrator
 602 ";
 603         close(USERMAP);
 604
 605 #This is the secrets.tdb created by 'net ads join' from Samba3 to a
 606 #Samba4 DC with the same parameters as are being used here.  The
 607 #domain SID is S-1-5-21-1071277805-689288055-3486227160
 608
 609         system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb $prefix/private/secrets.tdb");
 610         chmod 0600, "$prefix/private/secrets.tdb";
 611
 612 #Make sure there's no old ntdb file.
 613         system("rm -f $prefix/private/secrets.ntdb");
 614
 615 #This uses a pre-calculated krb5 credentials cache, obtained by running Samba4 with:
 616 # "--option=kdc:service ticket lifetime=239232" "--option=kdc:user ticket lifetime=239232" "--option=kdc:renewal lifetime=239232"
 617 #
 618 #and having in krb5.conf:
 619 # ticket_lifetime = 799718400
 620 # renew_lifetime = 799718400
 621 #
 622 # The commands for the -2 keytab where were:
 623 # kinit administrator@KTEST.SAMBA.EXAMPLE.COM
 624 # kvno host/localktest6@KTEST.SAMBA.EXAMPLE.COM
 625 # kvno cifs/localktest6@KTEST.SAMBA.EXAMPLE.COM
 626 # kvno host/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 627 # kvno cifs/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 628 #
 629 # and then for the -3 keytab, I did
 630 #
 631 # net changetrustpw; kdestroy and the same again.
 632 #
 633 # This creates a credential cache with a very long lifetime (2036 at
 634 # at 2011-04), and shows that running 'net changetrustpw' does not
 635 # break existing logins (for the secrets.tdb method at least).
 636 #
 637
 638         $ret->{KRB5_CCACHE}="FILE:$prefix/krb5_ccache";
 639
 640         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-2 $prefix/krb5_ccache-2");
 641         chmod 0600, "$prefix/krb5_ccache-2";
 642
 643         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-3 $prefix/krb5_ccache-3");
 644         chmod 0600, "$prefix/krb5_ccache-3";
 645
 646         # We need world access to this share, as otherwise the domain
 647         # administrator from the AD domain provided by ktest can't
 648         # access the share for tests.
 649         chmod 0777, "$prefix/share";
 650
 651         if (not $self->check_or_start($ret, "yes", "no", "yes")) {
 652                return undef;
 653         }
 654         return $ret;
 655 }
 656
 657 sub setup_maptoguest($$)
 658 {
 659         my ($self, $path) = @_;
 660
 661         print "PROVISIONING maptoguest...";
 662
 663         my $options = "
 664 map to guest = bad user
 665 ";
 666
 667         my $vars = $self->provision($path,
 668                                     "maptoguest",
 669                                     "maptoguestpass",
 670                                     $options);
 671
 672         $vars or return undef;
 673
 674         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 675                return undef;
 676         }
 677
 678         $self->{vars}->{s3maptoguest} = $vars;
 679
 680         return $vars;
 681 }
 682
 683 sub stop_sig_term($$) {
 684         my ($self, $pid) = @_;
 685         kill("USR1", $pid) or kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 686 }
 687
 688 sub stop_sig_kill($$) {
 689         my ($self, $pid) = @_;
 690         kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 691 }
 692
 693 sub write_pid($$$)
 694 {
 695         my ($env_vars, $app, $pid) = @_;
 696
 697         open(PID, ">$env_vars->{PIDDIR}/timelimit.$app.pid");
 698         print PID $pid;
 699         close(PID);
 700 }
 701
 702 sub read_pid($$)
 703 {
 704         my ($env_vars, $app) = @_;
 705
 706         open(PID, "<$env_vars->{PIDDIR}/timelimit.$app.pid");
 707         my $pid = <PID>;
 708         close(PID);
 709         return $pid;
 710 }
 711
 712 sub check_or_start($$$$$) {
 713         my ($self, $env_vars, $nmbd, $winbindd, $smbd) = @_;
 714
 715         # use a pipe for stdin in the child processes. This allows
 716         # those processes to monitor the pipe for EOF to ensure they
 717         # exit when the test script exits
 718         pipe(STDIN_READER, $env_vars->{STDIN_PIPE});
 719
 720         unlink($env_vars->{NMBD_TEST_LOG});
 721         print "STARTING NMBD...";
 722         my $pid = fork();
 723         if ($pid == 0) {
 724                 open STDOUT, ">$env_vars->{NMBD_TEST_LOG}";
 725                 open STDERR, '>&STDOUT';
 726
 727                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 728
 729                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 730                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 731                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 732
 733                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 734                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 735                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 736                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 737                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 738                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 739
 740                 $ENV{ENVNAME} = "$ENV{ENVNAME}.nmbd";
 741
 742                 if ($nmbd ne "yes") {
 743                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 744                                 my $signame = shift;
 745                                 print("Skip nmbd received signal $signame");
 746                                 exit 0;
 747                         };
 748                         sleep($self->{server_maxtime});
 749                         exit 0;
 750                 }
 751
 752                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
 753                 my @optargs = ("-d0");
 754                 if (defined($ENV{NMBD_OPTIONS})) {
 755                         @optargs = split(/ /, $ENV{NMBD_OPTIONS});
 756                 }
 757                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 758                 if(defined($ENV{NMBD_VALGRIND})) {
 759                         @preargs = split(/ /, $ENV{NMBD_VALGRIND});
 760                 }
 761                 my @args = ("-F", "--no-process-group",
 762                             "-s", $env_vars->{SERVERCONFFILE},
 763                             "-l", $env_vars->{LOGDIR});
 764                 if (not defined($ENV{NMBD_DONT_LOG_STDOUT})) {
 765                         push(@args, "--log-stdout");
 766                 }
 767
 768                 close($env_vars->{STDIN_PIPE});
 769                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 770
 771                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
 772                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
 773         }
 774         $env_vars->{NMBD_TL_PID} = $pid;
 775         write_pid($env_vars, "nmbd", $pid);
 776         print "DONE\n";
 777
 778         unlink($env_vars->{WINBINDD_TEST_LOG});
 779         print "STARTING WINBINDD...";
 780         $pid = fork();
 781         if ($pid == 0) {
 782                 open STDOUT, ">$env_vars->{WINBINDD_TEST_LOG}";
 783                 open STDERR, '>&STDOUT';
 784
 785                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 786
 787                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 788                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 789                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 790
 791                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 792                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 793                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 794                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 795                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 796                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 797                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
 798                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
 799                 } else {
 800                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
 801                 }
 802
 803                 $ENV{ENVNAME} = "$ENV{ENVNAME}.winbindd";
 804
 805                 if ($winbindd ne "yes") {
 806                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 807                                 my $signame = shift;
 808                                 print("Skip winbindd received signal $signame");
 809                                 exit 0;
 810                         };
 811                         sleep($self->{server_maxtime});
 812                         exit 0;
 813                 }
 814
 815                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
 816                 my @optargs = ("-d0");
 817                 if (defined($ENV{WINBINDD_OPTIONS})) {
 818                         @optargs = split(/ /, $ENV{WINBINDD_OPTIONS});
 819                 }
 820                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 821                 if(defined($ENV{WINBINDD_VALGRIND})) {
 822                         @preargs = split(/ /, $ENV{WINBINDD_VALGRIND});
 823                 }
 824                 my @args = ("-F", "--no-process-group",
 825                             "-s", $env_vars->{SERVERCONFFILE},
 826                             "-l", $env_vars->{LOGDIR});
 827                 if (not defined($ENV{WINBINDD_DONT_LOG_STDOUT})) {
 828                         push(@args, "--stdout");
 829                 }
 830
 831                 close($env_vars->{STDIN_PIPE});
 832                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 833
 834                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
 835                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
 836         }
 837         $env_vars->{WINBINDD_TL_PID} = $pid;
 838         write_pid($env_vars, "winbindd", $pid);
 839         print "DONE\n";
 840
 841         unlink($env_vars->{SMBD_TEST_LOG});
 842         print "STARTING SMBD...";
 843         $pid = fork();
 844         if ($pid == 0) {
 845                 open STDOUT, ">$env_vars->{SMBD_TEST_LOG}";
 846                 open STDERR, '>&STDOUT';
 847
 848                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 849
 850                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 851                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 852                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 853
 854                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 855                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 856                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 857                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 858                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 859                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 860                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
 861                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
 862                 } else {
 863                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
 864                 }
 865
 866                 $ENV{ENVNAME} = "$ENV{ENVNAME}.smbd";
 867
 868                 if ($smbd ne "yes") {
 869                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 870                                 my $signame = shift;
 871                                 print("Skip smbd received signal $signame");
 872                                 exit 0;
 873                         };
 874                         sleep($self->{server_maxtime});
 875                         exit 0;
 876                 }
 877
 878                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "smbd");
 879                 my @optargs = ("-d0");
 880                 if (defined($ENV{SMBD_OPTIONS})) {
 881                         @optargs = split(/ /, $ENV{SMBD_OPTIONS});
 882                 }
 883                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 884                 if(defined($ENV{SMBD_VALGRIND})) {
 885                         @preargs = split(/ /,$ENV{SMBD_VALGRIND});
 886                 }
 887                 my @args = ("-F", "--no-process-group",
 888                             "-s", $env_vars->{SERVERCONFFILE},
 889                             "-l", $env_vars->{LOGDIR});
 890                 if (not defined($ENV{SMBD_DONT_LOG_STDOUT})) {
 891                         push(@args, "--log-stdout");
 892                 }
 893
 894                 close($env_vars->{STDIN_PIPE});
 895                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 896
 897                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
 898                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
 899         }
 900         $env_vars->{SMBD_TL_PID} = $pid;
 901         write_pid($env_vars, "smbd", $pid);
 902         print "DONE\n";
 903
 904         close(STDIN_READER);
 905
 906         return $self->wait_for_start($env_vars, $nmbd, $winbindd, $smbd);
 907 }
 908
 909 sub provision($$$$$$$$)
 910 {
 911         my ($self, $prefix, $server, $password, $extra_options, $dc_server_ip, $dc_server_ipv6, $no_delete_prefix) = @_;
 912
 913         ##
 914         ## setup the various environment variables we need
 915         ##
 916
 917         my $swiface = Samba::get_interface($server);
 918         my %ret = ();
 919         my $server_ip = "127.0.0.$swiface";
 920         my $server_ipv6 = sprintf("fd00:0000:0000:0000:0000:0000:5357:5f%02x", $swiface);
 921         my $domain = "SAMBA-TEST";
 922
 923         my $unix_name = ($ENV{USER} or $ENV{LOGNAME} or `PATH=/usr/ucb:$ENV{PATH} whoami`);
 924         chomp $unix_name;
 925         my $unix_uid = $>;
 926         my $unix_gids_str = $);
 927         my @unix_gids = split(" ", $unix_gids_str);
 928
 929         my $prefix_abs = abs_path($prefix);
 930         my $bindir_abs = abs_path($self->{bindir});
 931
 932         my @dirs = ();
 933
 934         my $shrdir="$prefix_abs/share";
 935         push(@dirs,$shrdir);
 936
 937         my $libdir="$prefix_abs/lib";
 938         push(@dirs,$libdir);
 939
 940         my $piddir="$prefix_abs/pid";
 941         push(@dirs,$piddir);
 942
 943         my $privatedir="$prefix_abs/private";
 944         push(@dirs,$privatedir);
 945
 946         my $lockdir="$prefix_abs/lockdir";
 947         push(@dirs,$lockdir);
 948
 949         my $eventlogdir="$prefix_abs/lockdir/eventlog";
 950         push(@dirs,$eventlogdir);
 951
 952         my $logdir="$prefix_abs/logs";
 953         push(@dirs,$logdir);
 954
 955         my $driver32dir="$shrdir/W32X86";
 956         push(@dirs,$driver32dir);
 957
 958         my $driver64dir="$shrdir/x64";
 959         push(@dirs,$driver64dir);
 960
 961         my $driver40dir="$shrdir/WIN40";
 962         push(@dirs,$driver40dir);
 963
 964         my $ro_shrdir="$shrdir/root-tmp";
 965         push(@dirs,$ro_shrdir);
 966
 967         my $msdfs_shrdir="$shrdir/msdfsshare";
 968         push(@dirs,$msdfs_shrdir);
 969
 970         my $msdfs_deeppath="$msdfs_shrdir/deeppath";
 971         push(@dirs,$msdfs_deeppath);
 972
 973         my $badnames_shrdir="$shrdir/badnames";
 974         push(@dirs,$badnames_shrdir);
 975
 976         my $lease1_shrdir="$shrdir/SMB2_10";
 977         push(@dirs,$lease1_shrdir);
 978
 979         my $lease2_shrdir="$shrdir/SMB3_00";
 980         push(@dirs,$lease2_shrdir);
 981
 982         my $manglenames_shrdir="$shrdir/manglenames";
 983         push(@dirs,$manglenames_shrdir);
 984
 985         # this gets autocreated by winbindd
 986         my $wbsockdir="$prefix_abs/winbindd";
 987         my $wbsockprivdir="$lockdir/winbindd_privileged";
 988
 989         my $nmbdsockdir="$prefix_abs/nmbd";
 990         unlink($nmbdsockdir);
 991
 992         ##
 993         ## create the test directory layout
 994         ##
 995         die ("prefix_abs = ''") if $prefix_abs eq "";
 996         die ("prefix_abs = '/'") if $prefix_abs eq "/";
 997
 998         mkdir($prefix_abs, 0777);
 999         print "CREATE TEST ENVIRONMENT IN '$prefix'...";
1000         if (not defined($no_delete_prefix) or not $no_delete_prefix) {
1001             system("rm -rf $prefix_abs/*");
1002         }
1003         mkdir($_, 0777) foreach(@dirs);
1004
1005         my $fs_specific_conf = $self->get_fs_specific_conf($shrdir);
1006
1007         ##
1008         ## lockdir and piddir must be 0755
1009         ##
1010         chmod 0755, $lockdir;
1011         chmod 0755, $piddir;
1012
1013
1014         ##
1015         ## create ro and msdfs share layout
1016         ##
1017
1018         chmod 0755, $ro_shrdir;
1019         my $unreadable_file = "$ro_shrdir/unreadable_file";
1020         unless (open(UNREADABLE_FILE, ">$unreadable_file")) {
1021                 warn("Unable to open $unreadable_file");
1022                 return undef;
1023         }
1024         close(UNREADABLE_FILE);
1025         chmod 0600, $unreadable_file;
1026
1027         my $msdfs_target = "$ro_shrdir/msdfs-target";
1028         unless (open(MSDFS_TARGET, ">$msdfs_target")) {
1029                 warn("Unable to open $msdfs_target");
1030                 return undef;
1031         }
1032         close(MSDFS_TARGET);
1033         chmod 0666, $msdfs_target;
1034         symlink "msdfs:$server_ip\\ro-tmp,$server_ipv6\\ro-tmp",
1035                 "$msdfs_shrdir/msdfs-src1";
1036         symlink "msdfs:$server_ipv6\\ro-tmp", "$msdfs_shrdir/deeppath/msdfs-src2";
1037
1038         ##
1039         ## create bad names in $badnames_shrdir
1040         ##
1041         ## (An invalid name, would be mangled to 8.3).
1042         my $badname_target = "$badnames_shrdir/\340|\231\216\377\177";
1043         unless (open(BADNAME_TARGET, ">$badname_target")) {
1044                 warn("Unable to open $badname_target");
1045                 return undef;
1046         }
1047         close(BADNAME_TARGET);
1048         chmod 0666, $badname_target;
1049
1050         ## (A bad name, would not be mangled to 8.3).
1051         my $badname_target = "$badnames_shrdir/\240\276\346\327\377\177";
1052         unless (open(BADNAME_TARGET, ">$badname_target")) {
1053                 warn("Unable to open $badname_target");
1054                 return undef;
1055         }
1056         close(BADNAME_TARGET);
1057         chmod 0666, $badname_target;
1058
1059         ## (A bad good name).
1060         my $badname_target = "$badnames_shrdir/blank.txt";
1061         unless (open(BADNAME_TARGET, ">$badname_target")) {
1062                 warn("Unable to open $badname_target");
1063                 return undef;
1064         }
1065         close(BADNAME_TARGET);
1066         chmod 0666, $badname_target;
1067
1068         ##
1069         ## create mangleable directory names in $manglenames_shrdir
1070         ##
1071         my $manglename_target = "$manglenames_shrdir/foo:bar";
1072         mkdir($manglename_target, 0777);
1073
1074         my $conffile="$libdir/server.conf";
1075
1076         my $nss_wrapper_pl = "$ENV{PERL} $self->{srcdir}/lib/nss_wrapper/nss_wrapper.pl";
1077         my $nss_wrapper_passwd = "$privatedir/passwd";
1078         my $nss_wrapper_group = "$privatedir/group";
1079         my $nss_wrapper_hosts = "$ENV{SELFTEST_PREFIX}/hosts";
1080         my $resolv_conf = "$privatedir/resolv.conf";
1081         my $dns_host_file = "$ENV{SELFTEST_PREFIX}/dns_host_file";
1082
1083         my $mod_printer_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/printing/modprinter.pl";
1084
1085         my $fake_snap_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/fake_snap.pl";
1086
1087         my @eventlog_list = ("dns server", "application");
1088
1089         ##
1090         ## calculate uids and gids
1091         ##
1092
1093         my ($max_uid, $max_gid);
1094         my ($uid_nobody, $uid_root, $uid_pdbtest, $uid_pdbtest2);
1095         my ($gid_nobody, $gid_nogroup, $gid_root, $gid_domusers, $gid_domadmins);
1096
1097         if ($unix_uid < 0xffff - 4) {
1098                 $max_uid = 0xffff;
1099         } else {
1100                 $max_uid = $unix_uid;
1101         }
1102
1103         $uid_root = $max_uid - 1;
1104         $uid_nobody = $max_uid - 2;
1105         $uid_pdbtest = $max_uid - 3;
1106         $uid_pdbtest2 = $max_uid - 4;
1107
1108         if ($unix_gids[0] < 0xffff - 5) {
1109                 $max_gid = 0xffff;
1110         } else {
1111                 $max_gid = $unix_gids[0];
1112         }
1113
1114         $gid_nobody = $max_gid - 1;
1115         $gid_nogroup = $max_gid - 2;
1116         $gid_root = $max_gid - 3;
1117         $gid_domusers = $max_gid - 4;
1118         $gid_domadmins = $max_gid - 5;
1119
1120         ##
1121         ## create conffile
1122         ##
1123
1124         unless (open(CONF, ">$conffile")) {
1125                 warn("Unable to open $conffile");
1126                 return undef;
1127         }
1128         print CONF "
1129 [global]
1130         netbios name = $server
1131         interfaces = $server_ip/8 $server_ipv6/64
1132         bind interfaces only = yes
1133         panic action = cd $self->{srcdir} && $self->{srcdir}/selftest/gdb_backtrace %d %\$(MAKE_TEST_BINARY)
1134         smbd:suicide mode = yes
1135
1136         workgroup = $domain
1137
1138         private dir = $privatedir
1139         pid directory = $piddir
1140         lock directory = $lockdir
1141         log file = $logdir/log.\%m
1142         log level = 1
1143         debug pid = yes
1144         max log size = 0
1145
1146         state directory = $lockdir
1147         cache directory = $lockdir
1148
1149         passdb backend = tdbsam
1150
1151         time server = yes
1152
1153         add user script =               $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1154         add group script =              $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action add --name %g
1155         add machine script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1156         add user to group script =      $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action add --member %u --name %g --group_path $nss_wrapper_group
1157         delete user script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action delete --name %u
1158         delete group script =           $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action delete --name %g
1159         delete user from group script = $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action delete --member %u --name %g --group_path $nss_wrapper_group
1160
1161         addprinter command =            $mod_printer_pl -a -s $conffile --
1162         deleteprinter command =         $mod_printer_pl -d -s $conffile --
1163
1164         eventlog list = application \"dns server\"
1165
1166         kernel oplocks = no
1167         kernel change notify = no
1168         smb2 leases = yes
1169
1170         logging = file
1171         printing = bsd
1172         printcap name = /dev/null
1173
1174         winbindd socket directory = $wbsockdir
1175         nmbd:socket dir = $nmbdsockdir
1176         idmap config * : range = 100000-200000
1177         winbind enum users = yes
1178         winbind enum groups = yes
1179         winbind separator = /
1180
1181 #       min receivefile size = 4000
1182
1183         read only = no
1184         server signing = auto
1185
1186         smbd:sharedelay = 100000
1187         smbd:writetimeupdatedelay = 500000
1188         map hidden = no
1189         map system = no
1190         map readonly = no
1191         store dos attributes = yes
1192         create mask = 755
1193         dos filemode = yes
1194         strict rename = yes
1195         vfs objects = acl_xattr fake_acls xattr_tdb streams_depot
1196
1197         printing = vlp
1198         print command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb print %p %s
1199         lpq command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpq %p
1200         lp rm command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lprm %p %j
1201         lp pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lppause %p %j
1202         lp resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpresume %p %j
1203         queue pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queuepause %p
1204         queue resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queueresume %p
1205         lpq cache time = 0
1206         print notify backchannel = yes
1207
1208         ncalrpc dir = $prefix_abs/ncalrpc
1209
1210         # The samba3.blackbox.smbclient_s3 test uses this to test that
1211         # sending messages works, and that the %m sub works.
1212         message command = mv %s $shrdir/message.%m
1213
1214         # fsrvp server requires registry shares
1215         registry shares = yes
1216
1217         # Used by RPC SRVSVC tests
1218         add share command = $bindir_abs/smbaddshare
1219         change share command = $bindir_abs/smbchangeshare
1220         delete share command = $bindir_abs/smbdeleteshare
1221
1222         # fruit:copyfile is a global option
1223         fruit:copyfile = yes
1224
1225         # Begin extra options
1226         $extra_options
1227         # End extra options
1228
1229         #Include user defined custom parameters if set
1230 ";
1231
1232         if (defined($ENV{INCLUDE_CUSTOM_CONF})) {
1233                 print CONF "\t$ENV{INCLUDE_CUSTOM_CONF}\n";
1234         }
1235
1236         print CONF "
1237 [tmp]
1238         path = $shrdir
1239         comment = smb username is [%U]
1240 [tmpsort]
1241         path = $shrdir
1242         comment = Load dirsort module
1243         vfs objects = dirsort acl_xattr fake_acls xattr_tdb streams_depot
1244 [tmpenc]
1245         path = $shrdir
1246         comment = encrypt smb username is [%U]
1247         smb encrypt = required
1248         vfs objects = dirsort
1249 [tmpguest]
1250         path = $shrdir
1251         guest ok = yes
1252 [guestonly]
1253         path = $shrdir
1254         guest only = yes
1255         guest ok = yes
1256 [forceuser]
1257         path = $shrdir
1258         force user = $unix_name
1259         guest ok = yes
1260 [forceuser_unixonly]
1261         path = $shrdir
1262         force user = pdbtest
1263         guest ok = yes
1264 [forcegroup]
1265         path = $shrdir
1266         force group = nogroup
1267         guest ok = yes
1268 [ro-tmp]
1269         path = $ro_shrdir
1270         guest ok = yes
1271 [write-list-tmp]
1272         path = $shrdir
1273         read only = yes
1274         write list = $unix_name
1275 [valid-users-tmp]
1276         path = $shrdir
1277         valid users = $unix_name
1278 [msdfs-share]
1279         path = $msdfs_shrdir
1280         msdfs root = yes
1281         msdfs shuffle referrals = yes
1282         guest ok = yes
1283 [hideunread]
1284         copy = tmp
1285         hide unreadable = yes
1286 [tmpcase]
1287         copy = tmp
1288         case sensitive = yes
1289 [hideunwrite]
1290         copy = tmp
1291         hide unwriteable files = yes
1292 [durable]
1293         copy = tmp
1294         kernel share modes = no
1295         kernel oplocks = no
1296         posix locking = no
1297 [fs_specific]
1298         copy = tmp
1299         $fs_specific_conf
1300 [print1]
1301         copy = tmp
1302         printable = yes
1303
1304 [print2]
1305         copy = print1
1306 [print3]
1307         copy = print1
1308         default devmode = no
1309 [lp]
1310         copy = print1
1311
1312 [nfs4acl_simple]
1313         path = $shrdir
1314         comment = smb username is [%U]
1315         nfs4:mode = simple
1316         vfs objects = nfs4acl_xattr xattr_tdb
1317
1318 [nfs4acl_special]
1319         path = $shrdir
1320         comment = smb username is [%U]
1321         nfs4:mode = special
1322         vfs objects = nfs4acl_xattr xattr_tdb
1323
1324 [xcopy_share]
1325         path = $shrdir
1326         comment = smb username is [%U]
1327         create mask = 777
1328         force create mode = 777
1329 [posix_share]
1330         path = $shrdir
1331         comment = smb username is [%U]
1332         create mask = 0777
1333         force create mode = 0
1334         directory mask = 0777
1335         force directory mode = 0
1336         vfs objects = xattr_tdb
1337 [aio]
1338         copy = tmp
1339         aio read size = 1
1340         aio write size = 1
1341
1342 [print\$]
1343         copy = tmp
1344
1345 [vfs_fruit]
1346         path = $shrdir
1347         vfs objects = catia fruit streams_xattr
1348         fruit:ressource = file
1349         fruit:metadata = netatalk
1350         fruit:locking = netatalk
1351         fruit:encoding = native
1352
1353 [badname-tmp]
1354         path = $badnames_shrdir
1355         guest ok = yes
1356
1357 [manglenames_share]
1358         path = $manglenames_shrdir
1359         guest ok = yes
1360
1361 [dynamic_share]
1362         path = $shrdir/%R
1363         guest ok = yes
1364
1365 [fsrvp_share]
1366         path = $shrdir
1367         comment = fake shapshots using rsync
1368         vfs objects = shell_snap shadow_copy2
1369         shell_snap:check path command = $fake_snap_pl --check
1370         shell_snap:create command = $fake_snap_pl --create
1371         shell_snap:delete command = $fake_snap_pl --delete
1372         # a relative path here fails, the snapshot dir is no longer found
1373         shadow:snapdir = $shrdir/.snapshots
1374         ";
1375         close(CONF);
1376
1377         ##
1378         ## create a test account
1379         ##
1380
1381         unless (open(PASSWD, ">$nss_wrapper_passwd")) {
1382            warn("Unable to open $nss_wrapper_passwd");
1383            return undef;
1384         }
1385         print PASSWD "nobody:x:$uid_nobody:$gid_nobody:nobody gecos:$prefix_abs:/bin/false
1386 $unix_name:x:$unix_uid:$unix_gids[0]:$unix_name gecos:$prefix_abs:/bin/false
1387 pdbtest:x:$uid_pdbtest:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
1388 pdbtest2:x:$uid_pdbtest2:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
1389 ";
1390         if ($unix_uid != 0) {
1391                 print PASSWD "root:x:$uid_root:$gid_root:root gecos:$prefix_abs:/bin/false
1392 ";
1393         }
1394         close(PASSWD);
1395
1396         unless (open(GROUP, ">$nss_wrapper_group")) {
1397              warn("Unable to open $nss_wrapper_group");
1398              return undef;
1399         }
1400         print GROUP "nobody:x:$gid_nobody:
1401 nogroup:x:$gid_nogroup:nobody
1402 $unix_name-group:x:$unix_gids[0]:
1403 domusers:X:$gid_domusers:
1404 domadmins:X:$gid_domadmins:
1405 ";
1406         if ($unix_gids[0] != 0) {
1407                 print GROUP "root:x:$gid_root:
1408 ";
1409         }
1410
1411         close(GROUP);
1412
1413         ## hosts
1414         my $hostname = lc($server);
1415         unless (open(HOSTS, ">>$nss_wrapper_hosts")) {
1416                 warn("Unable to open $nss_wrapper_hosts");
1417                 return undef;
1418         }
1419         print HOSTS "${server_ip} ${hostname}.samba.example.com ${hostname}\n";
1420         print HOSTS "${server_ipv6} ${hostname}.samba.example.com ${hostname}\n";
1421         close(HOSTS);
1422
1423         ## hosts
1424         unless (open(RESOLV_CONF, ">$resolv_conf")) {
1425                 warn("Unable to open $resolv_conf");
1426                 return undef;
1427         }
1428         if (defined($dc_server_ip) or defined($dc_server_ipv6)) {
1429                 if (defined($dc_server_ip)) {
1430                         print RESOLV_CONF "nameserver $dc_server_ip\n";
1431                 }
1432                 if (defined($dc_server_ipv6)) {
1433                         print RESOLV_CONF "nameserver $dc_server_ipv6\n";
1434                 }
1435         } else {
1436                 print RESOLV_CONF "nameserver ${server_ip}\n";
1437                 print RESOLV_CONF "nameserver ${server_ipv6}\n";
1438         }
1439         close(RESOLV_CONF);
1440
1441         foreach my $evlog (@eventlog_list) {
1442                 my $evlogtdb = "$eventlogdir/$evlog.tdb";
1443                 open(EVENTLOG, ">$evlogtdb") or die("Unable to open $evlogtdb");
1444                 close(EVENTLOG);
1445         }
1446
1447         $ENV{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1448         $ENV{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1449         $ENV{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
1450         $ENV{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
1451         if ($ENV{SAMBA_DNS_FAKING}) {
1452                 $ENV{RESOLV_WRAPPER_CONF} = $resolv_conf;
1453         } else {
1454                 $ENV{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
1455         }
1456
1457         my $cmd = "UID_WRAPPER_ROOT=1 " . Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $unix_name > /dev/null";
1458         unless (open(PWD, "|$cmd")) {
1459              warn("Unable to set password for test account\n$cmd");
1460              return undef;
1461         }
1462         print PWD "$password\n$password\n";
1463         unless (close(PWD)) {
1464              warn("Unable to set password for test account\n$cmd");
1465              return undef;
1466         }
1467         print "DONE\n";
1468
1469         open(DNS_UPDATE_LIST, ">$prefix/dns_update_list") or die("Unable to open $$prefix/dns_update_list");
1470         print DNS_UPDATE_LIST "A $server. $server_ip\n";
1471         print DNS_UPDATE_LIST "AAAA $server. $server_ipv6\n";
1472         close(DNS_UPDATE_LIST);
1473
1474         $ret{SERVER_IP} = $server_ip;
1475         $ret{SERVER_IPV6} = $server_ipv6;
1476         $ret{NMBD_TEST_LOG} = "$prefix/nmbd_test.log";
1477         $ret{NMBD_TEST_LOG_POS} = 0;
1478         $ret{WINBINDD_TEST_LOG} = "$prefix/winbindd_test.log";
1479         $ret{WINBINDD_TEST_LOG_POS} = 0;
1480         $ret{SMBD_TEST_LOG} = "$prefix/smbd_test.log";
1481         $ret{SMBD_TEST_LOG_POS} = 0;
1482         $ret{SERVERCONFFILE} = $conffile;
1483         $ret{CONFIGURATION} ="-s $conffile";
1484         $ret{SERVER} = $server;
1485         $ret{USERNAME} = $unix_name;
1486         $ret{USERID} = $unix_uid;
1487         $ret{DOMAIN} = $domain;
1488         $ret{NETBIOSNAME} = $server;
1489         $ret{PASSWORD} = $password;
1490         $ret{PIDDIR} = $piddir;
1491         $ret{SELFTEST_WINBINDD_SOCKET_DIR} = $wbsockdir;
1492         $ret{WINBINDD_PRIV_PIPE_DIR} = $wbsockprivdir;
1493         $ret{NMBD_SOCKET_DIR} = $nmbdsockdir;
1494         $ret{SOCKET_WRAPPER_DEFAULT_IFACE} = $swiface;
1495         $ret{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1496         $ret{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1497         $ret{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
1498         $ret{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
1499         $ret{NSS_WRAPPER_MODULE_SO_PATH} = Samba::nss_wrapper_winbind_so_path($self);
1500         $ret{NSS_WRAPPER_MODULE_FN_PREFIX} = "winbind";
1501         if ($ENV{SAMBA_DNS_FAKING}) {
1502                 $ret{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
1503         } else {
1504                 $ret{RESOLV_WRAPPER_CONF} = $resolv_conf;
1505         }
1506         $ret{LOCAL_PATH} = "$shrdir";
1507         $ret{LOGDIR} = $logdir;
1508
1509         return \%ret;
1510 }
1511
1512 sub wait_for_start($$$$$)
1513 {
1514         my ($self, $envvars, $nmbd, $winbindd, $smbd) = @_;
1515         my $ret;
1516
1517         if ($nmbd eq "yes") {
1518                 my $count = 0;
1519
1520                 # give time for nbt server to register its names
1521                 print "checking for nmbd\n";
1522
1523                 # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
1524                 my $nmblookup = Samba::bindir_path($self, "nmblookup");
1525
1526                 do {
1527                         $ret = system("$nmblookup $envvars->{CONFIGURATION} $envvars->{SERVER}");
1528                         if ($ret != 0) {
1529                                 sleep(1);
1530                         } else {
1531                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
1532                                 system("$nmblookup $envvars->{CONFIGURATION} __SAMBA__");
1533                                 system("$nmblookup $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
1534                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
1535                         }
1536                         $count++;
1537                 } while ($ret != 0 && $count < 10);
1538                 if ($count == 10) {
1539                         print "NMBD not reachable after 10 retries\n";
1540                         teardown_env($self, $envvars);
1541                         return 0;
1542                 }
1543         }
1544
1545         if ($winbindd eq "yes") {
1546             print "checking for winbindd\n";
1547             my $count = 0;
1548             do {
1549                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --ping-dc");
1550                 if ($ret != 0) {
1551                     sleep(2);
1552                 }
1553                 $count++;
1554             } while ($ret != 0 && $count < 10);
1555             if ($count == 10) {
1556                 print "WINBINDD not reachable after 20 seconds\n";
1557                 teardown_env($self, $envvars);
1558                 return 0;
1559             }
1560         }
1561
1562         if ($smbd eq "yes") {
1563             # make sure smbd is also up set
1564             print "wait for smbd\n";
1565
1566             my $count = 0;
1567             do {
1568                 $ret = system(Samba::bindir_path($self, "smbclient") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
1569                 if ($ret != 0) {
1570                     sleep(2);
1571                 }
1572                 $count++
1573             } while ($ret != 0 && $count < 10);
1574             if ($count == 10) {
1575                 print "SMBD failed to start up in a reasonable time (20sec)\n";
1576                 teardown_env($self, $envvars);
1577                 return 0;
1578             }
1579         }
1580
1581         # Ensure we have domain users mapped.
1582         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=513 unixgroup=domusers type=domain");
1583         if ($ret != 0) {
1584             return 1;
1585         }
1586         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=512 unixgroup=domadmins type=domain");
1587         if ($ret != 0) {
1588             return 1;
1589         }
1590
1591         if ($winbindd eq "yes") {
1592             # note: creating builtin groups requires winbindd for the
1593             # unix id allocator
1594             $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} sam createbuiltingroup Users");
1595             if ($ret != 0) {
1596                 print "Failed to create BUILTIN\\Users group\n";
1597                 return 0;
1598             }
1599             my $count = 0;
1600             do {
1601                 system(Samba::bindir_path($self, "net") . " $envvars->{CONFIGURATION} cache flush");
1602                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --sid-to-gid=S-1-5-32-545");
1603                 if ($ret != 0) {
1604                     sleep(2);
1605                 }
1606                 $count++;
1607             } while ($ret != 0 && $count < 10);
1608             if ($count == 10) {
1609                 print "WINBINDD not reachable after 20 seconds\n";
1610                 teardown_env($self, $envvars);
1611                 return 0;
1612             }
1613         }
1614
1615         print $self->getlog_env($envvars);
1616
1617         return 1;
1618 }
1619
1620 1;