2 Unix SMB/CIFS implementation.
3 SMB parameters and setup, plus a whole lot more.
5 Copyright (C) Andrew Tridgell 1992-2000
6 Copyright (C) John H Terpstra 1996-2002
7 Copyright (C) Luke Kenneth Casson Leighton 1996-2000
8 Copyright (C) Paul Ashton 1998-2000
9 Copyright (C) Simo Sorce 2001-2002
10 Copyright (C) Martin Pool 2002
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 3 of the License, or
15 (at your option) any later version.
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
22 You should have received a copy of the GNU General Public License
23 along with this program. If not, see <http://www.gnu.org/licenses/>.
29 /* logged when starting the various Samba daemons */
30 #define COPYRIGHT_STARTUP_MESSAGE "Copyright Andrew Tridgell and the Samba Team 1992-2008"
33 #if defined(LARGE_SMB_OFF_T)
34 #define BUFFER_SIZE (128*1024)
35 #else /* no large readwrite possible */
36 #define BUFFER_SIZE (0xFFFF)
39 #define SAFETY_MARGIN 1024
40 #define LARGE_WRITEX_HDR_SIZE 65
43 #define DGRAM_PORT 138
46 #define SMB_PORTS "445 139"
48 #define Undefined (-1)
56 #ifndef DEF_CREATE_MASK
57 #define DEF_CREATE_MASK (0755)
60 /* string manipulation flags - see clistr.c and srvstr.c */
61 #define STR_TERMINATE 1
65 #define STR_NOALIGN 16
66 #define STR_TERMINATE_ASCII 128
68 /* how long to wait for secondary SMB packets (milli-seconds) */
69 #define SMB_SECONDARY_WAIT (60*1000)
74 /* this defines the error codes that receive_smb can put in smb_read_error */
75 enum smb_read_errors
{
80 SMB_WRITE_ERROR
, /* This error code can go into the client smb_rw_error. */
83 SMB_DO_NOT_DO_TDIS
, /* cli_close_connection() check for this when smbfs wants to keep tree connected */
87 #define DIR_STRUCT_SIZE 43
89 /* these define the attribute byte as seen by DOS */
90 #define aRONLY (1L<<0) /* 0x01 */
91 #define aHIDDEN (1L<<1) /* 0x02 */
92 #define aSYSTEM (1L<<2) /* 0x04 */
93 #define aVOLID (1L<<3) /* 0x08 */
94 #define aDIR (1L<<4) /* 0x10 */
95 #define aARCH (1L<<5) /* 0x20 */
106 #define DOS_OPEN_RDONLY 0
107 #define DOS_OPEN_WRONLY 1
108 #define DOS_OPEN_RDWR 2
109 #define DOS_OPEN_EXEC 3
110 #define DOS_OPEN_FCB 0xF
112 /* define shifts and masks for share and open modes. */
113 #define OPENX_MODE_MASK 0xF
114 #define DENY_MODE_SHIFT 4
115 #define DENY_MODE_MASK 0x7
116 #define GET_OPENX_MODE(x) ((x) & OPENX_MODE_MASK)
117 #define SET_OPENX_MODE(x) ((x) & OPENX_MODE_MASK)
118 #define GET_DENY_MODE(x) (((x)>>DENY_MODE_SHIFT) & DENY_MODE_MASK)
119 #define SET_DENY_MODE(x) (((x) & DENY_MODE_MASK) <<DENY_MODE_SHIFT)
121 /* Sync on open file (not sure if used anymore... ?) */
122 #define FILE_SYNC_OPENMODE (1<<14)
123 #define GET_FILE_SYNC_OPENMODE(x) (((x) & FILE_SYNC_OPENMODE) ? True : False)
125 /* open disposition values */
126 #define OPENX_FILE_EXISTS_FAIL 0
127 #define OPENX_FILE_EXISTS_OPEN 1
128 #define OPENX_FILE_EXISTS_TRUNCATE 2
130 /* mask for open disposition. */
131 #define OPENX_FILE_OPEN_MASK 0x3
133 #define GET_FILE_OPENX_DISPOSITION(x) ((x) & FILE_OPEN_MASK)
134 #define SET_FILE_OPENX_DISPOSITION(x) ((x) & FILE_OPEN_MASK)
136 /* The above can be OR'ed with... */
137 #define OPENX_FILE_CREATE_IF_NOT_EXIST 0x10
138 #define OPENX_FILE_FAIL_IF_NOT_EXIST 0
142 typedef union unid_t
{
148 * SMB UCS2 (16-bit unicode) internal type.
149 * smb_ucs2_t is *always* in little endian format.
152 typedef uint16 smb_ucs2_t
;
154 #ifdef WORDS_BIGENDIAN
160 /* turn a 7 bit character into a ucs2 character */
161 #define UCS2_CHAR(c) ((c) << UCS2_SHIFT)
163 /* return an ascii version of a ucs2 character */
164 #define UCS2_TO_CHAR(c) (((c) >> UCS2_SHIFT) & 0xff)
166 /* Copy into a smb_ucs2_t from a possibly unaligned buffer. Return the copied smb_ucs2_t */
167 #define COPY_UCS2_CHAR(dest,src) (((unsigned char *)(dest))[0] = ((unsigned char *)(src))[0],\
168 ((unsigned char *)(dest))[1] = ((unsigned char *)(src))[1], (dest))
170 /* Large data type for manipulating uint32 unicode codepoints */
171 typedef uint32 codepoint_t
;
172 #define INVALID_CODEPOINT ((codepoint_t)-1)
174 /* pipe string names */
175 #define PIPE_LANMAN "\\PIPE\\LANMAN"
176 #define PIPE_SRVSVC "\\PIPE\\srvsvc"
177 #define PIPE_SAMR "\\PIPE\\samr"
178 #define PIPE_WINREG "\\PIPE\\winreg"
179 #define PIPE_WKSSVC "\\PIPE\\wkssvc"
180 #define PIPE_NETLOGON "\\PIPE\\NETLOGON"
181 #define PIPE_NTLSA "\\PIPE\\ntlsa"
182 #define PIPE_NTSVCS "\\PIPE\\ntsvcs"
183 #define PIPE_LSASS "\\PIPE\\lsass"
184 #define PIPE_LSARPC "\\PIPE\\lsarpc"
185 #define PIPE_SPOOLSS "\\PIPE\\spoolss"
186 #define PIPE_NETDFS "\\PIPE\\netdfs"
187 #define PIPE_ECHO "\\PIPE\\rpcecho"
188 #define PIPE_SHUTDOWN "\\PIPE\\initshutdown"
189 #define PIPE_EPM "\\PIPE\\epmapper"
190 #define PIPE_SVCCTL "\\PIPE\\svcctl"
191 #define PIPE_EVENTLOG "\\PIPE\\eventlog"
193 #define PIPE_NETLOGON_PLAIN "\\NETLOGON"
196 #define PI_LSARPC_DS 1
198 #define PI_NETLOGON 3
205 #define PI_INITSHUTDOWN 10
207 #define PI_EVENTLOG 12
209 #define PI_MAX_PIPES 14
211 /* 64 bit time (100usec) since ????? - cifs6.txt, section 3.5, page 30 */
212 typedef uint64_t NTTIME
;
214 #define MAX_HOURS_LEN 32
217 #define MAXSUBAUTHS 15 /* max sub authorities in a SID */
220 #define SID_MAX_SIZE ((size_t)(8+(MAXSUBAUTHS*4)))
222 #define LOOKUP_NAME_NONE 0x00000000
223 #define LOOKUP_NAME_ISOLATED 0x00000001 /* Look up unqualified names */
224 #define LOOKUP_NAME_REMOTE 0x00000002 /* Ask others */
225 #define LOOKUP_NAME_GROUP 0x00000004 /* (unused) This is a NASTY hack for
226 valid users = @foo where foo also
227 exists in as user. */
228 #define LOOKUP_NAME_EXPLICIT 0x00000008 /* Only include
229 explicitly mapped names and not
230 the Unix {User,Group} domain */
231 #define LOOKUP_NAME_BUILTIN 0x00000010 /* builtin names */
232 #define LOOKUP_NAME_WKN 0x00000020 /* well known names */
233 #define LOOKUP_NAME_DOMAIN 0x00000040 /* only lookup own domain */
234 #define LOOKUP_NAME_LOCAL (LOOKUP_NAME_ISOLATED\
235 |LOOKUP_NAME_BUILTIN\
238 #define LOOKUP_NAME_ALL (LOOKUP_NAME_ISOLATED\
240 |LOOKUP_NAME_BUILTIN\
245 * @brief Security Identifier
247 * @sa http://msdn.microsoft.com/library/default.asp?url=/library/en-us/security/accctrl_38yn.asp
249 typedef struct dom_sid
{
250 uint8 sid_rev_num
; /**< SID revision number */
251 uint8 num_auths
; /**< Number of sub-authorities */
252 uint8 id_auth
[6]; /**< Identifier Authority */
254 * Pointer to sub-authorities.
256 * @note The values in these uint32's are in *native* byteorder, not
257 * neccessarily little-endian...... JRA.
259 uint32 sub_auths
[MAXSUBAUTHS
];
262 #define dom_sid2 dom_sid
263 #define dom_sid28 dom_sid
273 ID_TYPE_NOT_SPECIFIED
= 0,
286 enum id_mapping status
;
289 /* used to hold an arbitrary blob of data */
290 typedef struct data_blob
{
293 void (*free
)(struct data_blob
*data_blob
);
296 extern const DATA_BLOB data_blob_null
;
298 #include "librpc/gen_ndr/misc.h"
299 #include "librpc/ndr/security.h"
300 #include "librpc/ndr/libndr.h"
301 #include "librpc/gen_ndr/lsa.h"
302 #include "librpc/gen_ndr/dfs.h"
303 #include "librpc/gen_ndr/winreg.h"
304 #include "librpc/gen_ndr/initshutdown.h"
305 #include "librpc/gen_ndr/eventlog.h"
306 #include "librpc/gen_ndr/srvsvc.h"
307 #include "librpc/gen_ndr/wkssvc.h"
308 #include "librpc/gen_ndr/echo.h"
309 #include "librpc/gen_ndr/svcctl.h"
310 #include "librpc/gen_ndr/netlogon.h"
311 #include "librpc/gen_ndr/samr.h"
312 #include "librpc/gen_ndr/libnet_join.h"
314 struct lsa_dom_info
{
322 struct lsa_name_info
{
324 enum lsa_SidType type
;
329 /* Some well-known SIDs */
330 extern const DOM_SID global_sid_World_Domain
;
331 extern const DOM_SID global_sid_World
;
332 extern const DOM_SID global_sid_Creator_Owner_Domain
;
333 extern const DOM_SID global_sid_NT_Authority
;
334 extern const DOM_SID global_sid_System
;
335 extern const DOM_SID global_sid_NULL
;
336 extern const DOM_SID global_sid_Authenticated_Users
;
337 extern const DOM_SID global_sid_Network
;
338 extern const DOM_SID global_sid_Creator_Owner
;
339 extern const DOM_SID global_sid_Creator_Group
;
340 extern const DOM_SID global_sid_Anonymous
;
341 extern const DOM_SID global_sid_Builtin
;
342 extern const DOM_SID global_sid_Builtin_Administrators
;
343 extern const DOM_SID global_sid_Builtin_Users
;
344 extern const DOM_SID global_sid_Builtin_Guests
;
345 extern const DOM_SID global_sid_Builtin_Power_Users
;
346 extern const DOM_SID global_sid_Builtin_Account_Operators
;
347 extern const DOM_SID global_sid_Builtin_Server_Operators
;
348 extern const DOM_SID global_sid_Builtin_Print_Operators
;
349 extern const DOM_SID global_sid_Builtin_Backup_Operators
;
350 extern const DOM_SID global_sid_Builtin_Replicator
;
351 extern const DOM_SID global_sid_Builtin_PreWin2kAccess
;
352 extern const DOM_SID global_sid_Unix_Users
;
353 extern const DOM_SID global_sid_Unix_Groups
;
356 * The complete list of SIDS belonging to this user.
357 * Created when a vuid is registered.
358 * The definition of the user_sids array is as follows :
360 * token->user_sids[0] = primary user SID.
361 * token->user_sids[1] = primary group SID.
362 * token->user_sids[2..num_sids] = supplementary group SIDS.
365 #define PRIMARY_USER_SID_INDEX 0
366 #define PRIMARY_GROUP_SID_INDEX 1
368 typedef struct nt_user_token
{
374 typedef struct _unix_token
{
381 /* 32 bit time (sec) since 01jan1970 - cifs6.txt, section 3.5, page 30 */
382 typedef struct time_info
{
386 typedef struct write_cache
{
395 smb_ucs2_t
*origname
;
396 smb_ucs2_t
*filename
;
397 SMB_STRUCT_STAT
*statinfo
;
400 #include "fake_file.h"
405 SMB_BIG_UINT position_information
;
407 uint32 private_options
; /* NT Create options, but we only look at
408 * NTCREATEX_OPTIONS_PRIVATE_DENY_DOS and
409 * NTCREATEX_OPTIONS_PRIVATE_DENY_FCB (Except
410 * for print files *only*, where
411 * DELETE_ON_CLOSE is not stored in the share
414 unsigned long gen_id
;
417 struct event_context
;
421 struct share_mode_entry
;
424 struct vfs_fsp_data
{
425 struct vfs_fsp_data
*next
;
426 struct vfs_handle_struct
*owner
;
427 /* NOTE: This structure contains two pointers so that we can guarantee
428 * that the end of the structure is always both 4-byte and 8-byte aligned.
432 /* the basic packet size, assuming no words or bytes */
435 struct notify_change
{
440 struct notify_mid_map
;
443 struct notify_change_request
;
444 struct sys_notify_backend
;
445 struct sys_notify_context
{
446 struct event_context
*ev
;
447 struct connection_struct
*conn
;
448 void *private_data
; /* For use by the system backend */
451 struct notify_change_buf
{
453 * If no requests are pending, changes are queued here. Simple array,
458 * num_changes == -1 means that we have got a catch-all change, when
459 * asked we just return NT_STATUS_OK without specific changes.
462 struct notify_change
*changes
;
465 * If no changes are around requests are queued here. Using a linked
466 * list, because we have to append at the end and delete from the top.
468 struct notify_change_request
*requests
;
471 typedef struct files_struct
{
472 struct files_struct
*next
, *prev
;
474 struct connection_struct
*conn
;
475 struct fd_handle
*fh
;
476 unsigned int num_smb_operations
;
477 uint16 rap_print_jobid
;
478 struct file_id file_id
;
479 SMB_BIG_UINT initial_allocation_size
; /* Faked up initial allocation on disk. */
484 struct timeval open_time
;
485 uint32 access_mask
; /* NTCreateX access bits (FILE_READ_DATA etc.) */
486 uint32 share_access
; /* NTCreateX share constants (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE). */
487 bool pending_modtime_owner
;
488 struct timespec pending_modtime
;
489 struct timespec last_write_time
;
491 int sent_oplock_break
;
492 struct timed_event
*oplock_timeout
;
493 struct lock_struct last_lock_failure
;
494 int current_lock_count
; /* Count the number of outstanding locks and pending locks. */
496 struct share_mode_entry
*pending_break_messages
;
497 int num_pending_break_messages
;
506 bool aio_write_behind
;
508 bool initial_delete_on_close
; /* Only set at NTCreateX if file was created. */
512 struct vfs_fsp_data
*vfs_extension
;
513 FAKE_FILE_HANDLE
*fake_file_handle
;
515 struct notify_change_buf
*notify
;
518 #include "ntquotas.h"
519 #include "sysquotas.h"
522 * Structure used to keep directory state information around.
523 * Used in NT change-notify code.
531 struct vuid_cache_entry
{
538 unsigned int entries
;
539 struct vuid_cache_entry array
[VUID_CACHE_SIZE
];
545 } name_compare_entry
;
548 struct trans_state
*next
, *prev
;
552 uint32 max_param_return
;
553 uint32 max_data_return
;
554 uint32 max_setup_return
;
556 uint8 cmd
; /* SMBtrans or SMBtrans2 */
558 char *name
; /* for trans requests */
559 uint16 call
; /* for trans2 and nttrans requests */
561 bool close_on_completion
;
564 unsigned int setup_count
;
567 size_t received_data
;
568 size_t received_param
;
578 * Info about an alternate data stream
581 struct stream_struct
{
583 SMB_OFF_T alloc_size
;
587 /* Include VFS stuff */
589 #include "smb_acls.h"
592 struct dfree_cached_info
{
593 time_t last_dfree_time
;
594 SMB_BIG_UINT dfree_ret
;
602 struct share_params
{
606 struct share_iterator
{
610 typedef struct connection_struct
{
611 struct connection_struct
*next
, *prev
;
612 TALLOC_CTX
*mem_ctx
; /* long-lived memory context for things hanging off this struct. */
613 unsigned cnum
; /* an index passed over the wire */
614 struct share_params
*params
;
617 struct vuid_cache vuid_cache
;
618 struct dptr_struct
*dirptr
;
621 bool read_only
; /* Attributes for the current user of the share. */
622 bool admin_user
; /* Attributes for the current user of the share. */
627 struct vfs_ops vfs
; /* Filesystem operations */
628 struct vfs_ops vfs_opaque
; /* OPAQUE Filesystem operations */
629 struct vfs_handle_struct
*vfs_handles
; /* for the new plugins */
631 char *user
; /* name of user who *opened* this connection */
632 uid_t uid
; /* uid of user who *opened* this connection */
633 gid_t gid
; /* gid of user who *opened* this connection */
634 char client_address
[INET6_ADDRSTRLEN
]; /* String version of client IP address. */
636 uint16 vuid
; /* vuid of user who *opened* this connection, or UID_FIELD_INVALID */
638 /* following groups stuff added by ih */
640 /* This groups info is valid for the user that *opened* the connection */
643 NT_USER_TOKEN
*nt_user_token
;
646 time_t lastused_count
;
649 unsigned int num_smb_operations
; /* Count of smb operations on this tree. */
653 /* Semantics requested by the client or forced by the server config. */
656 bool short_case_preserve
;
658 /* Semantics provided by the underlying filesystem. */
661 name_compare_entry
*hide_list
; /* Per-share list of files to return as hidden. */
662 name_compare_entry
*veto_list
; /* Per-share list of files to veto (never show). */
663 name_compare_entry
*veto_oplock_list
; /* Per-share list of files to refuse oplocks on. */
664 name_compare_entry
*aio_write_behind_list
; /* Per-share list of files to use aio write behind on. */
665 struct dfree_cached_info
*dfree_info
;
666 struct trans_state
*pending_trans
;
667 struct notify_context
*notify_ctx
;
670 struct current_user
{
671 connection_struct
*conn
;
674 NT_USER_TOKEN
*nt_user_token
;
688 connection_struct
*conn
;
691 /* Defines for the sent_oplock_break field above. */
692 #define NO_BREAK_SENT 0
693 #define BREAK_TO_NONE_SENT 1
694 #define LEVEL_II_BREAK_SENT 2
697 fstring smb_name
; /* user name from the client */
698 fstring unix_name
; /* unix user name of a validated user */
699 fstring full_name
; /* to store full name (such as "Joe Bloggs") from gecos field of password file */
700 fstring domain
; /* domain that the client specified */
703 /* Extra fields above "LPQ_PRINTING" are used to map extra NT status codes. */
705 enum {LPQ_QUEUED
=0,LPQ_PAUSED
,LPQ_SPOOLING
,LPQ_PRINTING
,LPQ_ERROR
,LPQ_DELETING
,
706 LPQ_OFFLINE
,LPQ_PAPEROUT
,LPQ_PRINTED
,LPQ_DELETED
,LPQ_BLOCKED
,LPQ_USER_INTERVENTION
};
708 typedef struct _print_queue_struct
{
709 int job
; /* normally the UNIX jobid -- see note in
710 printing.c:traverse_fn_delete() */
718 } print_queue_struct
;
720 enum {LPSTAT_OK
, LPSTAT_STOPPED
, LPSTAT_ERROR
};
726 } print_status_struct
;
728 /* used for server information: client, nameserv and ipc */
729 struct server_info_struct
{
733 fstring domain
; /* used ONLY in ipc.c NOT namework.c */
734 bool server_added
; /* used ONLY in ipc.c NOT namework.c */
737 /* used for network interfaces */
739 struct interface
*next
, *prev
;
742 struct sockaddr_storage ip
;
743 struct sockaddr_storage netmask
;
744 struct sockaddr_storage bcast
;
747 /* Internal message queue for deferred opens. */
748 struct pending_message_list
{
749 struct pending_message_list
*next
, *prev
;
750 struct timeval request_time
; /* When was this first issued? */
751 struct timeval end_time
; /* When does this time out? */
754 DATA_BLOB private_data
;
757 #define SHARE_MODE_FLAG_POSIX_OPEN 0x1
758 #define SHARE_MODE_ALLOW_INITIAL_DELETE_ON_CLOSE 0x2
760 /* struct returned by get_share_modes */
761 struct share_mode_entry
{
762 struct server_id pid
;
765 uint32 access_mask
; /* NTCreateX access bits (FILE_READ_DATA etc.) */
766 uint32 share_access
; /* NTCreateX share constants (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE). */
767 uint32 private_options
; /* NT Create options, but we only look at
768 * NTCREATEX_OPTIONS_PRIVATE_DENY_DOS and
769 * NTCREATEX_OPTIONS_PRIVATE_DENY_FCB for
770 * smbstatus and swat */
773 unsigned long share_file_id
;
774 uint32 uid
; /* uid of file opener. */
775 uint16 flags
; /* See SHARE_MODE_XX above. */
778 /* oplock break message definition - linearization of share_mode_entry.
781 0 struct server_id pid 4
784 8 uint32 access_mask 4
785 12 uint32 share_access 4
786 16 uint32 private_options 4
788 24 uint32 time usec 4
789 28 SMB_DEV_T dev 8 bytes.
790 36 SMB_INO_T inode 8 bytes
791 44 unsigned long file_id 4 bytes
792 48 uint32 uid 4 bytes
793 52 uint16 flags 2 bytes
797 #ifdef CLUSTER_SUPPORT
798 #define MSG_SMB_SHARE_MODE_ENTRY_SIZE 58
800 #define MSG_SMB_SHARE_MODE_ENTRY_SIZE 54
803 struct share_mode_lock
{
804 const char *servicepath
; /* canonicalized. */
805 const char *filename
;
808 struct share_mode_entry
*share_modes
;
809 UNIX_USER_TOKEN
*delete_token
;
810 bool delete_on_close
;
813 struct db_record
*record
;
817 * Internal structure of locking.tdb share mode db.
818 * Used by locking.c and libsmbsharemodes.c
821 struct locking_data
{
824 int num_share_mode_entries
;
825 bool delete_on_close
;
826 uint32 delete_token_size
; /* Only valid if either of
827 the two previous fields
830 struct share_mode_entry dummy
; /* Needed for alignment. */
832 /* The following four entries are implicit
833 struct share_mode_entry modes[num_share_mode_entries];
834 char unix_token[delete_token_size] (divisible by 4).
840 /* Used to store pipe open records for NetFileEnum() */
842 struct pipe_open_rec
{
843 struct server_id pid
;
850 #define NT_HASH_LEN 16
851 #define LM_HASH_LEN 16
853 /* Password history contants. */
854 #define PW_HISTORY_SALT_LEN 16
855 #define SALTED_MD5_HASH_LEN 16
856 #define PW_HISTORY_ENTRY_LEN (PW_HISTORY_SALT_LEN+SALTED_MD5_HASH_LEN)
857 #define MAX_PW_HISTORY_LEN 24
860 * Flags for account policy.
862 #define AP_MIN_PASSWORD_LEN 1
863 #define AP_PASSWORD_HISTORY 2
864 #define AP_USER_MUST_LOGON_TO_CHG_PASS 3
865 #define AP_MAX_PASSWORD_AGE 4
866 #define AP_MIN_PASSWORD_AGE 5
867 #define AP_LOCK_ACCOUNT_DURATION 6
868 #define AP_RESET_COUNT_TIME 7
869 #define AP_BAD_ATTEMPT_LOCKOUT 8
870 #define AP_TIME_TO_LOGOUT 9
871 #define AP_REFUSE_MACHINE_PW_CHANGE 10
874 * Flags for local user manipulation.
877 #define LOCAL_ADD_USER 0x1
878 #define LOCAL_DELETE_USER 0x2
879 #define LOCAL_DISABLE_USER 0x4
880 #define LOCAL_ENABLE_USER 0x8
881 #define LOCAL_TRUST_ACCOUNT 0x10
882 #define LOCAL_SET_NO_PASSWORD 0x20
883 #define LOCAL_SET_PASSWORD 0x40
884 #define LOCAL_SET_LDAP_ADMIN_PW 0x80
885 #define LOCAL_INTERDOM_ACCOUNT 0x100
886 #define LOCAL_AM_ROOT 0x200 /* Act as root */
888 /* key and data in the connections database - used in smbstatus and smbd */
889 struct connections_key
{
890 struct server_id pid
;
895 struct connections_data
{
897 struct server_id pid
;
901 char servicename
[FSTRING_LEN
];
903 char machine
[FSTRING_LEN
];
905 uint32 bcast_msg_flags
;
909 /* the following are used by loadparm for option lists */
911 P_BOOL
,P_BOOLREV
,P_CHAR
,P_INTEGER
,P_OCTAL
,P_LIST
,
912 P_STRING
,P_USTRING
,P_ENUM
,P_SEP
916 P_LOCAL
,P_GLOBAL
,P_SEPARATOR
,P_NONE
929 bool (*special
)(int snum
, const char *, char **);
930 const struct enum_list
*enum_list
;
941 /* The following flags are used in SWAT */
942 #define FLAG_BASIC 0x0001 /* Display only in BASIC view */
943 #define FLAG_SHARE 0x0002 /* file sharing options */
944 #define FLAG_PRINT 0x0004 /* printing options */
945 #define FLAG_GLOBAL 0x0008 /* local options that should be globally settable in SWAT */
946 #define FLAG_WIZARD 0x0010 /* Parameters that the wizard will operate on */
947 #define FLAG_ADVANCED 0x0020 /* Parameters that will be visible in advanced view */
948 #define FLAG_DEVELOPER 0x0040 /* No longer used */
949 #define FLAG_DEPRECATED 0x1000 /* options that should no longer be used */
950 #define FLAG_HIDE 0x2000 /* options that should be hidden in SWAT */
951 #define FLAG_DOS_STRING 0x4000 /* convert from UNIX to DOS codepage when reading this string. */
958 /* offsets into message for common items */
965 #define smb_pidhigh 16
966 #define smb_ss_field 18
992 /* flag defines. CIFS spec 3.1.1 */
993 #define FLAG_SUPPORT_LOCKREAD 0x01
994 #define FLAG_CLIENT_BUF_AVAIL 0x02
995 #define FLAG_RESERVED 0x04
996 #define FLAG_CASELESS_PATHNAMES 0x08
997 #define FLAG_CANONICAL_PATHNAMES 0x10
998 #define FLAG_REQUEST_OPLOCK 0x20
999 #define FLAG_REQUEST_BATCH_OPLOCK 0x40
1000 #define FLAG_REPLY 0x80
1003 #define SMBmkdir 0x00 /* create directory */
1004 #define SMBrmdir 0x01 /* delete directory */
1005 #define SMBopen 0x02 /* open file */
1006 #define SMBcreate 0x03 /* create file */
1007 #define SMBclose 0x04 /* close file */
1008 #define SMBflush 0x05 /* flush file */
1009 #define SMBunlink 0x06 /* delete file */
1010 #define SMBmv 0x07 /* rename file */
1011 #define SMBgetatr 0x08 /* get file attributes */
1012 #define SMBsetatr 0x09 /* set file attributes */
1013 #define SMBread 0x0A /* read from file */
1014 #define SMBwrite 0x0B /* write to file */
1015 #define SMBlock 0x0C /* lock byte range */
1016 #define SMBunlock 0x0D /* unlock byte range */
1017 #define SMBctemp 0x0E /* create temporary file */
1018 #define SMBmknew 0x0F /* make new file */
1019 #define SMBcheckpath 0x10 /* check directory path */
1020 #define SMBexit 0x11 /* process exit */
1021 #define SMBlseek 0x12 /* seek */
1022 #define SMBtcon 0x70 /* tree connect */
1023 #define SMBtconX 0x75 /* tree connect and X*/
1024 #define SMBtdis 0x71 /* tree disconnect */
1025 #define SMBnegprot 0x72 /* negotiate protocol */
1026 #define SMBdskattr 0x80 /* get disk attributes */
1027 #define SMBsearch 0x81 /* search directory */
1028 #define SMBsplopen 0xC0 /* open print spool file */
1029 #define SMBsplwr 0xC1 /* write to print spool file */
1030 #define SMBsplclose 0xC2 /* close print spool file */
1031 #define SMBsplretq 0xC3 /* return print queue */
1032 #define SMBsends 0xD0 /* send single block message */
1033 #define SMBsendb 0xD1 /* send broadcast message */
1034 #define SMBfwdname 0xD2 /* forward user name */
1035 #define SMBcancelf 0xD3 /* cancel forward */
1036 #define SMBgetmac 0xD4 /* get machine name */
1037 #define SMBsendstrt 0xD5 /* send start of multi-block message */
1038 #define SMBsendend 0xD6 /* send end of multi-block message */
1039 #define SMBsendtxt 0xD7 /* send text of multi-block message */
1041 /* Core+ protocol */
1042 #define SMBlockread 0x13 /* Lock a range and read */
1043 #define SMBwriteunlock 0x14 /* Unlock a range then write */
1044 #define SMBreadbraw 0x1a /* read a block of data with no smb header */
1045 #define SMBwritebraw 0x1d /* write a block of data with no smb header */
1046 #define SMBwritec 0x20 /* secondary write request */
1047 #define SMBwriteclose 0x2c /* write a file then close it */
1049 /* dos extended protocol */
1050 #define SMBreadBraw 0x1A /* read block raw */
1051 #define SMBreadBmpx 0x1B /* read block multiplexed */
1052 #define SMBreadBs 0x1C /* read block (secondary response) */
1053 #define SMBwriteBraw 0x1D /* write block raw */
1054 #define SMBwriteBmpx 0x1E /* write block multiplexed */
1055 #define SMBwriteBs 0x1F /* write block (secondary request) */
1056 #define SMBwriteC 0x20 /* write complete response */
1057 #define SMBsetattrE 0x22 /* set file attributes expanded */
1058 #define SMBgetattrE 0x23 /* get file attributes expanded */
1059 #define SMBlockingX 0x24 /* lock/unlock byte ranges and X */
1060 #define SMBtrans 0x25 /* transaction - name, bytes in/out */
1061 #define SMBtranss 0x26 /* transaction (secondary request/response) */
1062 #define SMBioctl 0x27 /* IOCTL */
1063 #define SMBioctls 0x28 /* IOCTL (secondary request/response) */
1064 #define SMBcopy 0x29 /* copy */
1065 #define SMBmove 0x2A /* move */
1066 #define SMBecho 0x2B /* echo */
1067 #define SMBopenX 0x2D /* open and X */
1068 #define SMBreadX 0x2E /* read and X */
1069 #define SMBwriteX 0x2F /* write and X */
1070 #define SMBsesssetupX 0x73 /* Session Set Up & X (including User Logon) */
1071 #define SMBffirst 0x82 /* find first */
1072 #define SMBfunique 0x83 /* find unique */
1073 #define SMBfclose 0x84 /* find close */
1074 #define SMBkeepalive 0x85 /* keepalive */
1075 #define SMBinvalid 0xFE /* invalid command */
1077 /* Extended 2.0 protocol */
1078 #define SMBtrans2 0x32 /* TRANS2 protocol set */
1079 #define SMBtranss2 0x33 /* TRANS2 protocol set, secondary command */
1080 #define SMBfindclose 0x34 /* Terminate a TRANSACT2_FINDFIRST */
1081 #define SMBfindnclose 0x35 /* Terminate a TRANSACT2_FINDNOTIFYFIRST */
1082 #define SMBulogoffX 0x74 /* user logoff */
1084 /* NT SMB extensions. */
1085 #define SMBnttrans 0xA0 /* NT transact */
1086 #define SMBnttranss 0xA1 /* NT transact secondary */
1087 #define SMBntcreateX 0xA2 /* NT create and X */
1088 #define SMBntcancel 0xA4 /* NT cancel */
1089 #define SMBntrename 0xA5 /* NT rename */
1091 /* These are the trans subcommands */
1092 #define TRANSACT_SETNAMEDPIPEHANDLESTATE 0x01
1093 #define TRANSACT_DCERPCCMD 0x26
1094 #define TRANSACT_WAITNAMEDPIPEHANDLESTATE 0x53
1096 /* These are the TRANS2 sub commands */
1097 #define TRANSACT2_OPEN 0x00
1098 #define TRANSACT2_FINDFIRST 0x01
1099 #define TRANSACT2_FINDNEXT 0x02
1100 #define TRANSACT2_QFSINFO 0x03
1101 #define TRANSACT2_SETFSINFO 0x04
1102 #define TRANSACT2_QPATHINFO 0x05
1103 #define TRANSACT2_SETPATHINFO 0x06
1104 #define TRANSACT2_QFILEINFO 0x07
1105 #define TRANSACT2_SETFILEINFO 0x08
1106 #define TRANSACT2_FSCTL 0x09
1107 #define TRANSACT2_IOCTL 0x0A
1108 #define TRANSACT2_FINDNOTIFYFIRST 0x0B
1109 #define TRANSACT2_FINDNOTIFYNEXT 0x0C
1110 #define TRANSACT2_MKDIR 0x0D
1111 #define TRANSACT2_SESSION_SETUP 0x0E
1112 #define TRANSACT2_GET_DFS_REFERRAL 0x10
1113 #define TRANSACT2_REPORT_DFS_INCONSISTANCY 0x11
1115 /* These are the NT transact sub commands. */
1116 #define NT_TRANSACT_CREATE 1
1117 #define NT_TRANSACT_IOCTL 2
1118 #define NT_TRANSACT_SET_SECURITY_DESC 3
1119 #define NT_TRANSACT_NOTIFY_CHANGE 4
1120 #define NT_TRANSACT_RENAME 5
1121 #define NT_TRANSACT_QUERY_SECURITY_DESC 6
1122 #define NT_TRANSACT_GET_USER_QUOTA 7
1123 #define NT_TRANSACT_SET_USER_QUOTA 8
1125 /* These are the NT transact_get_user_quota sub commands */
1126 #define TRANSACT_GET_USER_QUOTA_LIST_CONTINUE 0x0000
1127 #define TRANSACT_GET_USER_QUOTA_LIST_START 0x0100
1128 #define TRANSACT_GET_USER_QUOTA_FOR_SID 0x0101
1130 /* Relevant IOCTL codes */
1131 #define IOCTL_QUERY_JOB_INFO 0x530060
1133 /* these are the trans2 sub fields for primary requests */
1134 #define smb_tpscnt smb_vwv0
1135 #define smb_tdscnt smb_vwv1
1136 #define smb_mprcnt smb_vwv2
1137 #define smb_mdrcnt smb_vwv3
1138 #define smb_msrcnt smb_vwv4
1139 #define smb_flags smb_vwv5
1140 #define smb_timeout smb_vwv6
1141 #define smb_pscnt smb_vwv9
1142 #define smb_psoff smb_vwv10
1143 #define smb_dscnt smb_vwv11
1144 #define smb_dsoff smb_vwv12
1145 #define smb_suwcnt smb_vwv13
1146 #define smb_setup smb_vwv14
1147 #define smb_setup0 smb_setup
1148 #define smb_setup1 (smb_setup+2)
1149 #define smb_setup2 (smb_setup+4)
1151 /* these are for the secondary requests */
1152 #define smb_spscnt smb_vwv2
1153 #define smb_spsoff smb_vwv3
1154 #define smb_spsdisp smb_vwv4
1155 #define smb_sdscnt smb_vwv5
1156 #define smb_sdsoff smb_vwv6
1157 #define smb_sdsdisp smb_vwv7
1158 #define smb_sfid smb_vwv8
1160 /* and these for responses */
1161 #define smb_tprcnt smb_vwv0
1162 #define smb_tdrcnt smb_vwv1
1163 #define smb_prcnt smb_vwv3
1164 #define smb_proff smb_vwv4
1165 #define smb_prdisp smb_vwv5
1166 #define smb_drcnt smb_vwv6
1167 #define smb_droff smb_vwv7
1168 #define smb_drdisp smb_vwv8
1170 /* these are for the NT trans primary request. */
1171 #define smb_nt_MaxSetupCount smb_vwv0
1172 #define smb_nt_Flags (smb_vwv0 + 1)
1173 #define smb_nt_TotalParameterCount (smb_vwv0 + 3)
1174 #define smb_nt_TotalDataCount (smb_vwv0 + 7)
1175 #define smb_nt_MaxParameterCount (smb_vwv0 + 11)
1176 #define smb_nt_MaxDataCount (smb_vwv0 + 15)
1177 #define smb_nt_ParameterCount (smb_vwv0 + 19)
1178 #define smb_nt_ParameterOffset (smb_vwv0 + 23)
1179 #define smb_nt_DataCount (smb_vwv0 + 27)
1180 #define smb_nt_DataOffset (smb_vwv0 + 31)
1181 #define smb_nt_SetupCount (smb_vwv0 + 35)
1182 #define smb_nt_Function (smb_vwv0 + 36)
1183 #define smb_nt_SetupStart (smb_vwv0 + 38)
1185 /* these are for the NT trans secondary request. */
1186 #define smb_nts_TotalParameterCount (smb_vwv0 + 3)
1187 #define smb_nts_TotalDataCount (smb_vwv0 + 7)
1188 #define smb_nts_ParameterCount (smb_vwv0 + 11)
1189 #define smb_nts_ParameterOffset (smb_vwv0 + 15)
1190 #define smb_nts_ParameterDisplacement (smb_vwv0 + 19)
1191 #define smb_nts_DataCount (smb_vwv0 + 23)
1192 #define smb_nts_DataOffset (smb_vwv0 + 27)
1193 #define smb_nts_DataDisplacement (smb_vwv0 + 31)
1195 /* these are for the NT trans reply. */
1196 #define smb_ntr_TotalParameterCount (smb_vwv0 + 3)
1197 #define smb_ntr_TotalDataCount (smb_vwv0 + 7)
1198 #define smb_ntr_ParameterCount (smb_vwv0 + 11)
1199 #define smb_ntr_ParameterOffset (smb_vwv0 + 15)
1200 #define smb_ntr_ParameterDisplacement (smb_vwv0 + 19)
1201 #define smb_ntr_DataCount (smb_vwv0 + 23)
1202 #define smb_ntr_DataOffset (smb_vwv0 + 27)
1203 #define smb_ntr_DataDisplacement (smb_vwv0 + 31)
1205 /* these are for the NT create_and_X */
1206 #define smb_ntcreate_NameLength (smb_vwv0 + 5)
1207 #define smb_ntcreate_Flags (smb_vwv0 + 7)
1208 #define smb_ntcreate_RootDirectoryFid (smb_vwv0 + 11)
1209 #define smb_ntcreate_DesiredAccess (smb_vwv0 + 15)
1210 #define smb_ntcreate_AllocationSize (smb_vwv0 + 19)
1211 #define smb_ntcreate_FileAttributes (smb_vwv0 + 27)
1212 #define smb_ntcreate_ShareAccess (smb_vwv0 + 31)
1213 #define smb_ntcreate_CreateDisposition (smb_vwv0 + 35)
1214 #define smb_ntcreate_CreateOptions (smb_vwv0 + 39)
1215 #define smb_ntcreate_ImpersonationLevel (smb_vwv0 + 43)
1216 #define smb_ntcreate_SecurityFlags (smb_vwv0 + 47)
1218 /* this is used on a TConX. I'm not sure the name is very helpful though */
1219 #define SMB_SUPPORT_SEARCH_BITS 0x0001
1220 #define SMB_SHARE_IN_DFS 0x0002
1222 /* Named pipe write mode flags. Used in writeX calls. */
1223 #define PIPE_RAW_MODE 0x4
1224 #define PIPE_START_MESSAGE 0x8
1226 /* File Specific access rights */
1227 #define FILE_READ_DATA 0x00000001
1228 #define FILE_WRITE_DATA 0x00000002
1229 #define FILE_APPEND_DATA 0x00000004
1230 #define FILE_READ_EA 0x00000008 /* File and directory */
1231 #define FILE_WRITE_EA 0x00000010 /* File and directory */
1232 #define FILE_EXECUTE 0x00000020
1233 #define FILE_DELETE_CHILD 0x00000040
1234 #define FILE_READ_ATTRIBUTES 0x00000080
1235 #define FILE_WRITE_ATTRIBUTES 0x00000100
1237 #define FILE_ALL_ACCESS 0x000001FF
1239 /* Directory specific access rights */
1240 #define FILE_LIST_DIRECTORY 0x00000001
1241 #define FILE_ADD_FILE 0x00000002
1242 #define FILE_ADD_SUBDIRECTORY 0x00000004
1243 #define FILE_TRAVERSE 0x00000020
1244 #define FILE_DELETE_CHILD 0x00000040
1246 /* the desired access to use when opening a pipe */
1247 #define DESIRED_ACCESS_PIPE 0x2019f
1249 /* Generic access masks & rights. */
1250 #define DELETE_ACCESS 0x00010000 /* (1L<<16) */
1251 #define READ_CONTROL_ACCESS 0x00020000 /* (1L<<17) */
1252 #define WRITE_DAC_ACCESS 0x00040000 /* (1L<<18) */
1253 #define WRITE_OWNER_ACCESS 0x00080000 /* (1L<<19) */
1254 #define SYNCHRONIZE_ACCESS 0x00100000 /* (1L<<20) */
1256 #define SYSTEM_SECURITY_ACCESS 0x01000000 /* (1L<<24) */
1257 #define MAXIMUM_ALLOWED_ACCESS 0x02000000 /* (1L<<25) */
1258 #define GENERIC_ALL_ACCESS 0x10000000 /* (1<<28) */
1259 #define GENERIC_EXECUTE_ACCESS 0x20000000 /* (1<<29) */
1260 #define GENERIC_WRITE_ACCESS 0x40000000 /* (1<<30) */
1261 #define GENERIC_READ_ACCESS ((unsigned)0x80000000) /* (((unsigned)1)<<31) */
1263 /* Mapping of generic access rights for files to specific rights. */
1265 /* This maps to 0x1F01FF */
1266 #define FILE_GENERIC_ALL (STANDARD_RIGHTS_REQUIRED_ACCESS| SYNCHRONIZE_ACCESS|FILE_ALL_ACCESS)
1268 /* This maps to 0x120089 */
1269 #define FILE_GENERIC_READ (STANDARD_RIGHTS_READ_ACCESS|FILE_READ_DATA|FILE_READ_ATTRIBUTES|\
1270 FILE_READ_EA|SYNCHRONIZE_ACCESS)
1272 /* This maps to 0x120116 */
1273 #define FILE_GENERIC_WRITE (STD_RIGHT_READ_CONTROL_ACCESS|FILE_WRITE_DATA|FILE_WRITE_ATTRIBUTES|\
1274 FILE_WRITE_EA|FILE_APPEND_DATA|SYNCHRONIZE_ACCESS)
1276 #define FILE_GENERIC_EXECUTE (STANDARD_RIGHTS_EXECUTE_ACCESS|\
1277 FILE_EXECUTE|SYNCHRONIZE_ACCESS)
1279 /* Share specific rights. */
1280 #define SHARE_ALL_ACCESS FILE_GENERIC_ALL
1281 #define SHARE_READ_ONLY (FILE_GENERIC_READ|FILE_EXECUTE)
1283 /* Mapping of access rights to UNIX perms. */
1284 #define UNIX_ACCESS_RWX FILE_GENERIC_ALL
1285 #define UNIX_ACCESS_R FILE_GENERIC_READ
1286 #define UNIX_ACCESS_W FILE_GENERIC_WRITE
1287 #define UNIX_ACCESS_X FILE_GENERIC_EXECUTE
1289 /* Mapping of access rights to UNIX perms. for a UNIX directory. */
1290 #define UNIX_DIRECTORY_ACCESS_RWX FILE_GENERIC_ALL
1291 #define UNIX_DIRECTORY_ACCESS_R FILE_GENERIC_READ
1292 #define UNIX_DIRECTORY_ACCESS_W FILE_GENERIC_WRITE
1293 #define UNIX_DIRECTORY_ACCESS_X FILE_GENERIC_EXECUTE
1297 * This is the old mapping we used to use. To get W2KSP2 profiles
1298 * working we need to map to the canonical file perms.
1300 #define UNIX_ACCESS_RWX (UNIX_ACCESS_R|UNIX_ACCESS_W|UNIX_ACCESS_X)
1301 #define UNIX_ACCESS_R (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1302 FILE_READ_ATTRIBUTES|FILE_READ_EA|FILE_READ_DATA)
1303 #define UNIX_ACCESS_W (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1304 FILE_WRITE_ATTRIBUTES|FILE_WRITE_EA|\
1305 FILE_APPEND_DATA|FILE_WRITE_DATA)
1306 #define UNIX_ACCESS_X (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1307 FILE_EXECUTE|FILE_READ_ATTRIBUTES)
1310 #define UNIX_ACCESS_NONE (WRITE_OWNER_ACCESS)
1313 #define REQUEST_OPLOCK 2
1314 #define REQUEST_BATCH_OPLOCK 4
1315 #define OPEN_DIRECTORY 8
1316 #define EXTENDED_RESPONSE_REQUIRED 0x10
1318 /* ShareAccess field. */
1319 #define FILE_SHARE_NONE 0 /* Cannot be used in bitmask. */
1320 #define FILE_SHARE_READ 1
1321 #define FILE_SHARE_WRITE 2
1322 #define FILE_SHARE_DELETE 4
1324 /* FileAttributesField */
1325 #define FILE_ATTRIBUTE_READONLY 0x001L
1326 #define FILE_ATTRIBUTE_HIDDEN 0x002L
1327 #define FILE_ATTRIBUTE_SYSTEM 0x004L
1328 #define FILE_ATTRIBUTE_DIRECTORY 0x010L
1329 #define FILE_ATTRIBUTE_ARCHIVE 0x020L
1330 #define FILE_ATTRIBUTE_NORMAL 0x080L
1331 #define FILE_ATTRIBUTE_TEMPORARY 0x100L
1332 #define FILE_ATTRIBUTE_SPARSE 0x200L
1333 #define FILE_ATTRIBUTE_REPARSE_POINT 0x400L
1334 #define FILE_ATTRIBUTE_COMPRESSED 0x800L
1335 #define FILE_ATTRIBUTE_OFFLINE 0x1000L
1336 #define FILE_ATTRIBUTE_NONINDEXED 0x2000L
1337 #define FILE_ATTRIBUTE_ENCRYPTED 0x4000L
1338 #define SAMBA_ATTRIBUTES_MASK 0x7F
1340 /* Flags - combined with attributes. */
1341 #define FILE_FLAG_WRITE_THROUGH 0x80000000L
1342 #define FILE_FLAG_NO_BUFFERING 0x20000000L
1343 #define FILE_FLAG_RANDOM_ACCESS 0x10000000L
1344 #define FILE_FLAG_SEQUENTIAL_SCAN 0x08000000L
1345 #define FILE_FLAG_DELETE_ON_CLOSE 0x04000000L
1346 #define FILE_FLAG_BACKUP_SEMANTICS 0x02000000L
1347 #define FILE_FLAG_POSIX_SEMANTICS 0x01000000L
1349 /* CreateDisposition field. */
1350 #define FILE_SUPERSEDE 0 /* File exists overwrite/supersede. File not exist create. */
1351 #define FILE_OPEN 1 /* File exists open. File not exist fail. */
1352 #define FILE_CREATE 2 /* File exists fail. File not exist create. */
1353 #define FILE_OPEN_IF 3 /* File exists open. File not exist create. */
1354 #define FILE_OVERWRITE 4 /* File exists overwrite. File not exist fail. */
1355 #define FILE_OVERWRITE_IF 5 /* File exists overwrite. File not exist create. */
1357 /* CreateOptions field. */
1358 #define FILE_DIRECTORY_FILE 0x0001
1359 #define FILE_WRITE_THROUGH 0x0002
1360 #define FILE_SEQUENTIAL_ONLY 0x0004
1361 #define FILE_NON_DIRECTORY_FILE 0x0040
1362 #define FILE_NO_EA_KNOWLEDGE 0x0200
1363 #define FILE_EIGHT_DOT_THREE_ONLY 0x0400
1364 #define FILE_RANDOM_ACCESS 0x0800
1365 #define FILE_DELETE_ON_CLOSE 0x1000
1366 #define FILE_OPEN_BY_FILE_ID 0x2000
1368 /* Private create options used by the ntcreatex processing code. From Samba4. */
1369 #define NTCREATEX_OPTIONS_PRIVATE_DENY_DOS 0x01000000
1370 #define NTCREATEX_OPTIONS_PRIVATE_DENY_FCB 0x02000000
1372 /* Responses when opening a file. */
1373 #define FILE_WAS_SUPERSEDED 0
1374 #define FILE_WAS_OPENED 1
1375 #define FILE_WAS_CREATED 2
1376 #define FILE_WAS_OVERWRITTEN 3
1378 /* File type flags */
1379 #define FILE_TYPE_DISK 0
1380 #define FILE_TYPE_BYTE_MODE_PIPE 1
1381 #define FILE_TYPE_MESSAGE_MODE_PIPE 2
1382 #define FILE_TYPE_PRINTER 3
1383 #define FILE_TYPE_COMM_DEVICE 4
1384 #define FILE_TYPE_UNKNOWN 0xFFFF
1386 /* Flag for NT transact rename call. */
1387 #define RENAME_REPLACE_IF_EXISTS 1
1389 /* flags for SMBntrename call (from Samba4) */
1390 #define RENAME_FLAG_MOVE_CLUSTER_INFORMATION 0x102 /* ???? */
1391 #define RENAME_FLAG_HARD_LINK 0x103
1392 #define RENAME_FLAG_RENAME 0x104
1393 #define RENAME_FLAG_COPY 0x105
1395 /* Filesystem Attributes. */
1396 #define FILE_CASE_SENSITIVE_SEARCH 0x00000001
1397 #define FILE_CASE_PRESERVED_NAMES 0x00000002
1398 #define FILE_UNICODE_ON_DISK 0x00000004
1399 /* According to cifs9f, this is 4, not 8 */
1400 /* Acconding to testing, this actually sets the security attribute! */
1401 #define FILE_PERSISTENT_ACLS 0x00000008
1402 #define FILE_FILE_COMPRESSION 0x00000010
1403 #define FILE_VOLUME_QUOTAS 0x00000020
1404 #define FILE_SUPPORTS_SPARSE_FILES 0x00000040
1405 #define FILE_SUPPORTS_REPARSE_POINTS 0x00000080
1406 #define FILE_SUPPORTS_REMOTE_STORAGE 0x00000100
1407 #define FS_LFN_APIS 0x00004000
1408 #define FILE_VOLUME_IS_COMPRESSED 0x00008000
1409 #define FILE_SUPPORTS_OBJECT_IDS 0x00010000
1410 #define FILE_SUPPORTS_ENCRYPTION 0x00020000
1411 #define FILE_NAMED_STREAMS 0x00040000
1412 #define FILE_READ_ONLY_VOLUME 0x00080000
1414 /* ChangeNotify flags. */
1415 #define FILE_NOTIFY_CHANGE_FILE_NAME 0x001
1416 #define FILE_NOTIFY_CHANGE_DIR_NAME 0x002
1417 #define FILE_NOTIFY_CHANGE_ATTRIBUTES 0x004
1418 #define FILE_NOTIFY_CHANGE_SIZE 0x008
1419 #define FILE_NOTIFY_CHANGE_LAST_WRITE 0x010
1420 #define FILE_NOTIFY_CHANGE_LAST_ACCESS 0x020
1421 #define FILE_NOTIFY_CHANGE_CREATION 0x040
1422 #define FILE_NOTIFY_CHANGE_EA 0x080
1423 #define FILE_NOTIFY_CHANGE_SECURITY 0x100
1424 #define FILE_NOTIFY_CHANGE_STREAM_NAME 0x00000200
1425 #define FILE_NOTIFY_CHANGE_STREAM_SIZE 0x00000400
1426 #define FILE_NOTIFY_CHANGE_STREAM_WRITE 0x00000800
1428 #define FILE_NOTIFY_CHANGE_NAME \
1429 (FILE_NOTIFY_CHANGE_FILE_NAME|FILE_NOTIFY_CHANGE_DIR_NAME)
1431 /* change notify action results */
1432 #define NOTIFY_ACTION_ADDED 1
1433 #define NOTIFY_ACTION_REMOVED 2
1434 #define NOTIFY_ACTION_MODIFIED 3
1435 #define NOTIFY_ACTION_OLD_NAME 4
1436 #define NOTIFY_ACTION_NEW_NAME 5
1437 #define NOTIFY_ACTION_ADDED_STREAM 6
1438 #define NOTIFY_ACTION_REMOVED_STREAM 7
1439 #define NOTIFY_ACTION_MODIFIED_STREAM 8
1442 /* where to find the base of the SMB packet proper */
1443 #define smb_base(buf) (((char *)(buf))+4)
1445 /* we don't allow server strings to be longer than 48 characters as
1446 otherwise NT will not honour the announce packets */
1447 #define MAX_SERVER_STRING_LENGTH 48
1450 #define SMB_SUCCESS 0 /* The request was successful. */
1453 void dfs_unlogin(void);
1454 extern int dcelogin_atmost_once
;
1458 char *strdup(char *s
);
1462 #define SIGNAL_CAST (RETSIGTYPE (*)(int))
1469 /* This was set by JHT in liaison with Jeremy Allison early 1997
1471 * Version 4.0 - never made public
1472 * Version 4.10 - New to 1.9.16p2, lost in space 1.9.16p3 to 1.9.16p9
1473 * - Reappeared in 1.9.16p11 with fixed smbd services
1474 * Version 4.20 - To indicate that nmbd and browsing now works better
1475 * Version 4.50 - Set at release of samba-2.2.0 by JHT
1477 * Note: In the presence of NT4.X do not set above 4.9
1478 * Setting this above 4.9 can have undesired side-effects.
1479 * This may change again in Samba-3.0 after further testing. JHT
1482 #define DEFAULT_MAJOR_VERSION 0x04
1483 #define DEFAULT_MINOR_VERSION 0x09
1485 /* Browser Election Values */
1486 #define BROWSER_ELECTION_VERSION 0x010f
1487 #define BROWSER_CONSTANT 0xaa55
1489 /* Sercurity mode bits. */
1490 #define NEGOTIATE_SECURITY_USER_LEVEL 0x01
1491 #define NEGOTIATE_SECURITY_CHALLENGE_RESPONSE 0x02
1492 #define NEGOTIATE_SECURITY_SIGNATURES_ENABLED 0x04
1493 #define NEGOTIATE_SECURITY_SIGNATURES_REQUIRED 0x08
1495 /* NT Flags2 bits - cifs6.txt section 3.1.2 */
1497 #define FLAGS2_LONG_PATH_COMPONENTS 0x0001
1498 #define FLAGS2_EXTENDED_ATTRIBUTES 0x0002
1499 #define FLAGS2_SMB_SECURITY_SIGNATURES 0x0004
1500 #define FLAGS2_UNKNOWN_BIT4 0x0010
1501 #define FLAGS2_IS_LONG_NAME 0x0040
1502 #define FLAGS2_EXTENDED_SECURITY 0x0800
1503 #define FLAGS2_DFS_PATHNAMES 0x1000
1504 #define FLAGS2_READ_PERMIT_EXECUTE 0x2000
1505 #define FLAGS2_32_BIT_ERROR_CODES 0x4000
1506 #define FLAGS2_UNICODE_STRINGS 0x8000
1508 #define FLAGS2_WIN2K_SIGNATURE 0xC852 /* Hack alert ! For now... JRA. */
1510 /* TCONX Flag (smb_vwv2). */
1511 #define TCONX_FLAG_EXTENDED_RESPONSE 0x8
1513 /* Capabilities. see ftp.microsoft.com/developr/drg/cifs/cifs/cifs4.txt */
1515 #define CAP_RAW_MODE 0x0001
1516 #define CAP_MPX_MODE 0x0002
1517 #define CAP_UNICODE 0x0004
1518 #define CAP_LARGE_FILES 0x0008
1519 #define CAP_NT_SMBS 0x0010
1520 #define CAP_RPC_REMOTE_APIS 0x0020
1521 #define CAP_STATUS32 0x0040
1522 #define CAP_LEVEL_II_OPLOCKS 0x0080
1523 #define CAP_LOCK_AND_READ 0x0100
1524 #define CAP_NT_FIND 0x0200
1525 #define CAP_DFS 0x1000
1526 #define CAP_W2K_SMBS 0x2000
1527 #define CAP_LARGE_READX 0x4000
1528 #define CAP_LARGE_WRITEX 0x8000
1529 #define CAP_UNIX 0x800000 /* Capabilities for UNIX extensions. Created by HP. */
1530 #define CAP_EXTENDED_SECURITY 0x80000000
1532 /* protocol types. It assumes that higher protocols include lower protocols
1534 enum protocol_types
{PROTOCOL_NONE
,PROTOCOL_CORE
,PROTOCOL_COREPLUS
,PROTOCOL_LANMAN1
,PROTOCOL_LANMAN2
,PROTOCOL_NT1
};
1536 /* security levels */
1537 enum security_types
{SEC_SHARE
,SEC_USER
,SEC_SERVER
,SEC_DOMAIN
,SEC_ADS
};
1547 /* printing types */
1548 enum printing_types
{PRINT_BSD
,PRINT_SYSV
,PRINT_AIX
,PRINT_HPUX
,
1549 PRINT_QNX
,PRINT_PLP
,PRINT_LPRNG
,PRINT_SOFTQ
,
1550 PRINT_CUPS
,PRINT_LPRNT
,PRINT_LPROS2
,PRINT_IPRINT
1551 #if defined(DEVELOPER) || defined(ENABLE_BUILD_FARM_HACKS)
1552 ,PRINT_TEST
,PRINT_VLP
1553 #endif /* DEVELOPER */
1556 /* LDAP schema types */
1557 enum schema_types
{SCHEMA_COMPAT
, SCHEMA_AD
, SCHEMA_SAMBA
};
1559 /* LDAP SSL options */
1560 enum ldap_ssl_types
{LDAP_SSL_ON
, LDAP_SSL_OFF
, LDAP_SSL_START_TLS
};
1562 /* LDAP PASSWD SYNC methods */
1563 enum ldap_passwd_sync_types
{LDAP_PASSWD_SYNC_ON
, LDAP_PASSWD_SYNC_OFF
, LDAP_PASSWD_SYNC_ONLY
};
1565 /* Remote architectures we know about. */
1566 enum remote_arch_types
{RA_UNKNOWN
, RA_WFWG
, RA_OS2
, RA_WIN95
, RA_WINNT
,
1567 RA_WIN2K
, RA_WINXP
, RA_WIN2K3
, RA_VISTA
,
1568 RA_SAMBA
, RA_CIFSFS
};
1571 enum case_handling
{CASE_LOWER
,CASE_UPPER
};
1573 /* ACL compatibility */
1574 enum acl_compatibility
{ACL_COMPAT_AUTO
, ACL_COMPAT_WINNT
, ACL_COMPAT_WIN2K
};
1576 * Global value meaing that the smb_uid field should be
1577 * ingored (in share level security and protocol level == CORE)
1580 #define UID_FIELD_INVALID 0
1581 #define VUID_OFFSET 100 /* Amount to bias returned vuid numbers */
1584 * Size of buffer to use when moving files across filesystems.
1586 #define COPYBUF_SIZE (8*1024)
1589 * Used in chaining code.
1591 extern int chain_size
;
1594 * Map the Core and Extended Oplock requesst bits down
1595 * to common bits (EXCLUSIVE_OPLOCK & BATCH_OPLOCK).
1601 #define CORE_OPLOCK_REQUEST(inbuf) \
1602 ((CVAL(inbuf,smb_flg)&(FLAG_REQUEST_OPLOCK|FLAG_REQUEST_BATCH_OPLOCK))>>5)
1605 * Extended protocol.
1607 #define EXTENDED_OPLOCK_REQUEST(inbuf) ((SVAL(inbuf,smb_vwv2)&((1<<1)|(1<<2)))>>1)
1610 #define LOCKING_ANDX_SHARED_LOCK 0x1
1611 #define LOCKING_ANDX_OPLOCK_RELEASE 0x2
1612 #define LOCKING_ANDX_CHANGE_LOCKTYPE 0x4
1613 #define LOCKING_ANDX_CANCEL_LOCK 0x8
1614 #define LOCKING_ANDX_LARGE_FILES 0x10
1617 * Bits we test with.
1618 * Note these must fit into 16-bits.
1621 #define NO_OPLOCK 0x0
1622 #define EXCLUSIVE_OPLOCK 0x1
1623 #define BATCH_OPLOCK 0x2
1624 #define LEVEL_II_OPLOCK 0x4
1626 /* The following are Samba-private. */
1627 #define INTERNAL_OPEN_ONLY 0x8
1628 #define FAKE_LEVEL_II_OPLOCK 0x10 /* Client requested no_oplock, but we have to
1629 * inform potential level2 holders on
1631 #define DEFERRED_OPEN_ENTRY 0x20
1632 #define UNUSED_SHARE_MODE_ENTRY 0x40
1633 #define FORCE_OPLOCK_BREAK_TO_NONE 0x80
1635 /* None of the following should ever appear in fsp->oplock_request. */
1636 #define SAMBA_PRIVATE_OPLOCK_MASK (INTERNAL_OPEN_ONLY|DEFERRED_OPEN_ENTRY|UNUSED_SHARE_MODE_ENTRY|FORCE_OPLOCK_BREAK_TO_NONE)
1638 #define EXCLUSIVE_OPLOCK_TYPE(lck) ((lck) & ((unsigned int)EXCLUSIVE_OPLOCK|(unsigned int)BATCH_OPLOCK))
1639 #define BATCH_OPLOCK_TYPE(lck) ((lck) & (unsigned int)BATCH_OPLOCK)
1640 #define LEVEL_II_OPLOCK_TYPE(lck) ((lck) & ((unsigned int)LEVEL_II_OPLOCK|(unsigned int)FAKE_LEVEL_II_OPLOCK))
1642 struct inform_level2_message
{
1646 unsigned long target_file_id
;
1647 unsigned long source_file_id
;
1650 /* kernel_oplock_message definition.
1652 struct kernel_oplock_message {
1655 unsigned long file_id;
1659 0 SMB_DEV_T dev 8 bytes.
1660 8 SMB_INO_T inode 8 bytes
1661 16 unsigned long file_id 4 bytes
1665 #define MSG_SMB_KERNEL_BREAK_SIZE 20
1667 /* file_renamed_message definition.
1669 struct file_renamed_message {
1672 char names[1]; A variable area containing sharepath and filename.
1676 0 SMB_DEV_T dev 8 bytes.
1677 8 SMB_INO_T inode 8 bytes
1678 16 char [] name zero terminated namelen bytes
1679 minimum length == 18.
1683 #define MSG_FILE_RENAMED_MIN_SIZE 16
1686 * On the wire return values for oplock types.
1689 #define CORE_OPLOCK_GRANTED (1<<5)
1690 #define EXTENDED_OPLOCK_GRANTED (1<<15)
1692 #define NO_OPLOCK_RETURN 0
1693 #define EXCLUSIVE_OPLOCK_RETURN 1
1694 #define BATCH_OPLOCK_RETURN 2
1695 #define LEVEL_II_OPLOCK_RETURN 3
1698 #define OPLOCKLEVEL_NONE 0
1699 #define OPLOCKLEVEL_II 1
1702 * Capabilities abstracted for different systems.
1705 enum smbd_capability
{
1706 KERNEL_OPLOCK_CAPABILITY
,
1707 DMAPI_ACCESS_CAPABILITY
1710 /* if a kernel does support oplocks then a structure of the following
1711 typee is used to describe how to interact with the kernel */
1712 struct kernel_oplocks
{
1713 files_struct
* (*receive_message
)(fd_set
*fds
);
1714 bool (*set_oplock
)(files_struct
*fsp
, int oplock_type
);
1715 void (*release_oplock
)(files_struct
*fsp
);
1716 bool (*msg_waiting
)(fd_set
*fds
);
1717 int notification_fd
;
1720 #include "smb_macros.h"
1722 #define MAX_NETBIOSNAME_LEN 16
1723 /* DOS character, NetBIOS namestring. Type used on the wire. */
1724 typedef char nstring
[MAX_NETBIOSNAME_LEN
];
1725 /* Unix character, NetBIOS namestring. Type used to manipulate name in nmbd. */
1726 typedef char unstring
[MAX_NETBIOSNAME_LEN
*4];
1728 /* A netbios name structure. */
1732 unsigned int name_type
;
1735 /* A netbios node status array element. */
1736 typedef struct node_status_
{
1739 unsigned char flags
;
1740 } NODE_STATUS_STRUCT
;
1742 /* The extra info from a NetBIOS node status query */
1743 struct node_status_extra
{
1744 unsigned char mac_addr
[6];
1745 /* There really is more here ... */
1755 /* For split krb5 SPNEGO blobs. */
1756 struct pending_auth_data
{
1757 struct pending_auth_data
*prev
, *next
;
1758 uint16 vuid
; /* Tag for this entry. */
1759 uint16 smbpid
; /* Alternate tag for this entry. */
1761 DATA_BLOB partial_data
;
1764 typedef struct user_struct
{
1765 struct user_struct
*next
, *prev
;
1766 uint16 vuid
; /* Tag for this entry. */
1767 uid_t uid
; /* uid of a validated user */
1768 gid_t gid
; /* gid of a validated user */
1770 userdom_struct user
;
1771 const char *homedir
;
1772 const char *unix_homedir
;
1773 const char *logon_script
;
1777 /* following groups stuff added by ih */
1778 /* This groups info is needed for when we become_user() for this uid */
1782 NT_USER_TOKEN
*nt_user_token
;
1784 DATA_BLOB session_key
;
1786 char *session_keystr
; /* used by utmp and pam session code.
1790 struct auth_serversupplied_info
*server_info
;
1792 struct auth_ntlmssp_state
*auth_ntlmssp_state
;
1795 struct unix_error_map
{
1803 * Size of new password account encoding string. This is enough space to
1804 * hold 11 ACB characters, plus the surrounding [] and a terminating null.
1805 * Do not change unless you are adding new ACB bits!
1808 #define NEW_PW_FORMAT_SPACE_PADDED_LEN 14
1811 Do you want session setups at user level security with a invalid
1812 password to be rejected or allowed in as guest? WinNT rejects them
1813 but it can be a pain as it means "net view" needs to use a password
1815 You have 3 choices in the setting of map_to_guest:
1817 "NEVER_MAP_TO_GUEST" means session setups with an invalid password
1818 are rejected. This is the default.
1820 "MAP_TO_GUEST_ON_BAD_USER" means session setups with an invalid password
1821 are rejected, unless the username does not exist, in which case it
1822 is treated as a guest login
1824 "MAP_TO_GUEST_ON_BAD_PASSWORD" means session setups with an invalid password
1825 are treated as a guest login
1827 Note that map_to_guest only has an effect in user or server
1831 #define NEVER_MAP_TO_GUEST 0
1832 #define MAP_TO_GUEST_ON_BAD_USER 1
1833 #define MAP_TO_GUEST_ON_BAD_PASSWORD 2
1834 #define MAP_TO_GUEST_ON_BAD_UID 3
1836 #define SAFE_NETBIOS_CHARS ". -_"
1838 /* generic iconv conversion structure */
1839 typedef struct _smb_iconv_t
{
1840 size_t (*direct
)(void *cd
, const char **inbuf
, size_t *inbytesleft
,
1841 char **outbuf
, size_t *outbytesleft
);
1842 size_t (*pull
)(void *cd
, const char **inbuf
, size_t *inbytesleft
,
1843 char **outbuf
, size_t *outbytesleft
);
1844 size_t (*push
)(void *cd
, const char **inbuf
, size_t *inbytesleft
,
1845 char **outbuf
, size_t *outbytesleft
);
1846 void *cd_direct
, *cd_pull
, *cd_push
;
1847 char *from_name
, *to_name
;
1850 /* The maximum length of a trust account password.
1851 Used when we randomly create it, 15 char passwords
1852 exceed NT4's max password length */
1854 #define DEFAULT_TRUST_ACCOUNT_PASSWORD_LENGTH 14
1856 #include "popt_common.h"
1860 #define LDAP_PORT 389
1863 /* used by the IP comparison function */
1865 struct sockaddr_storage ss
;
1869 /* Special name type used to cause a _kerberos DNS lookup. */
1870 #define KDC_NAME_TYPE 0xDCDC
1872 /* Used by the SMB signing functions. */
1874 typedef struct smb_sign_info
{
1875 void (*sign_outgoing_message
)(char *outbuf
, struct smb_sign_info
*si
);
1876 bool (*check_incoming_message
)(const char *inbuf
, struct smb_sign_info
*si
, bool must_be_ok
);
1877 void (*free_signing_context
)(struct smb_sign_info
*si
);
1878 void *signing_context
;
1880 bool negotiated_smb_signing
;
1881 bool allow_smb_signing
;
1883 bool mandatory_signing
;
1884 bool seen_valid
; /* Have I ever seen a validly signed packet? */
1894 struct ea_list
*next
, *prev
;
1895 struct ea_struct ea
;
1898 /* EA names used internally in Samba. KEEP UP TO DATE with prohibited_ea_names in trans2.c !. */
1899 #define SAMBA_POSIX_INHERITANCE_EA_NAME "user.SAMBA_PAI"
1900 /* EA to use for DOS attributes */
1901 #define SAMBA_XATTR_DOS_ATTRIB "user.DOSATTRIB"
1903 #define UUID_SIZE 16
1905 #define UUID_FLAT_SIZE 16
1906 typedef struct uuid_flat
{
1907 uint8 info
[UUID_FLAT_SIZE
];
1910 /* map readonly options */
1911 enum mapreadonly_options
{MAP_READONLY_NO
, MAP_READONLY_YES
, MAP_READONLY_PERMISSIONS
};
1913 /* usershare error codes. */
1914 enum usershare_err
{
1916 USERSHARE_MALFORMED_FILE
,
1917 USERSHARE_BAD_VERSION
,
1918 USERSHARE_MALFORMED_PATH
,
1919 USERSHARE_MALFORMED_COMMENT_DEF
,
1920 USERSHARE_MALFORMED_ACL_DEF
,
1922 USERSHARE_PATH_NOT_ABSOLUTE
,
1923 USERSHARE_PATH_IS_DENIED
,
1924 USERSHARE_PATH_NOT_ALLOWED
,
1925 USERSHARE_PATH_NOT_DIRECTORY
,
1929 /* Different reasons for closing a file. */
1930 enum file_close_type
{NORMAL_CLOSE
=0,SHUTDOWN_CLOSE
,ERROR_CLOSE
};