selftest/target/Samba3.pm

   1 #!/usr/bin/perl
   2 # Bootstrap Samba and run a number of tests against it.
   3 # Copyright (C) 2005-2007 Jelmer Vernooij <jelmer@samba.org>
   4 # Published under the GNU GPL, v3 or later.
   5
   6 package Samba3;
   7
   8 use strict;
   9 use Cwd qw(abs_path);
  10 use FindBin qw($RealBin);
  11 use POSIX;
  12 use target::Samba;
  13
  14 sub have_ads($) {
  15         my ($self) = @_;
  16         my $found_ads = 0;
  17         my $smbd_build_options = Samba::bindir_path($self, "smbd") . " -b|";
  18         open(IN, $smbd_build_options) or die("Unable to run $smbd_build_options: $!");
  19
  20         while (<IN>) {
  21                 if (/WITH_ADS/) {
  22                        $found_ads = 1;
  23                 }
  24         }
  25         close IN;
  26
  27         # If we were not built with ADS support, pretend we were never even available
  28         return $found_ads;
  29 }
  30
  31 sub new($$) {
  32         my ($classname, $bindir, $binary_mapping, $srcdir, $server_maxtime) = @_;
  33         my $self = { vars => {},
  34                      bindir => $bindir,
  35                      binary_mapping => $binary_mapping,
  36                      srcdir => $srcdir,
  37                      server_maxtime => $server_maxtime
  38         };
  39         bless $self;
  40         return $self;
  41 }
  42
  43 sub teardown_env($$)
  44 {
  45         my ($self, $envvars) = @_;
  46         my $count = 0;
  47
  48         # This should cause smbd to terminate gracefully
  49         close($envvars->{STDIN_PIPE});
  50
  51         my $smbdpid = $envvars->{SMBD_TL_PID};
  52         my $nmbdpid = $envvars->{NMBD_TL_PID};
  53         my $winbinddpid = $envvars->{WINBINDD_TL_PID};
  54
  55         # This should give it time to write out the gcov data
  56         until ($count > 20) {
  57             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  58             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
  59             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
  60             if ($smbdchild == -1
  61                 && $nmbdchild == -1
  62                 && $winbinddchild == -1) {
  63                 last;
  64             }
  65             sleep(1);
  66             $count++;
  67         }
  68
  69         if ($count <= 20 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
  70             return;
  71         }
  72
  73         $self->stop_sig_term($smbdpid);
  74         $self->stop_sig_term($nmbdpid);
  75         $self->stop_sig_term($winbinddpid);
  76
  77         $count = 0;
  78         until ($count > 10) {
  79             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  80             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
  81             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
  82             if ($smbdchild == -1
  83                 && $nmbdchild == -1
  84                 && $winbinddchild == -1) {
  85                 last;
  86             }
  87             sleep(1);
  88             $count++;
  89         }
  90
  91         if ($count <= 10 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
  92             return;
  93         }
  94
  95         warn("timelimit process did not quit on SIGTERM, sending SIGKILL");
  96         $self->stop_sig_kill($smbdpid);
  97         $self->stop_sig_kill($nmbdpid);
  98         $self->stop_sig_kill($winbinddpid);
  99
 100         return 0;
 101 }
 102
 103 sub getlog_env_app($$$)
 104 {
 105         my ($self, $envvars, $name) = @_;
 106
 107         my $title = "$name LOG of: $envvars->{NETBIOSNAME}\n";
 108         my $out = $title;
 109
 110         open(LOG, "<".$envvars->{$name."_TEST_LOG"});
 111
 112         seek(LOG, $envvars->{$name."_TEST_LOG_POS"}, SEEK_SET);
 113         while (<LOG>) {
 114                 $out .= $_;
 115         }
 116         $envvars->{$name."_TEST_LOG_POS"} = tell(LOG);
 117         close(LOG);
 118
 119         return "" if $out eq $title;
 120
 121         return $out;
 122 }
 123
 124 sub getlog_env($$)
 125 {
 126         my ($self, $envvars) = @_;
 127         my $ret = "";
 128
 129         $ret .= $self->getlog_env_app($envvars, "SMBD");
 130         $ret .= $self->getlog_env_app($envvars, "NMBD");
 131         $ret .= $self->getlog_env_app($envvars, "WINBINDD");
 132
 133         return $ret;
 134 }
 135
 136 sub check_env($$)
 137 {
 138         my ($self, $envvars) = @_;
 139
 140         my $childpid = waitpid(-1, WNOHANG);
 141
 142         # TODO ...
 143         return 1;
 144 }
 145
 146 sub setup_env($$$)
 147 {
 148         my ($self, $envname, $path) = @_;
 149
 150         if (defined($self->{vars}->{$envname})) {
 151                 return $self->{vars}->{$envname};
 152         }
 153
 154         if ($envname eq "s3dc") {
 155                 return $self->setup_s3dc("$path/s3dc");
 156         } elsif ($envname eq "simpleserver") {
 157                 return $self->setup_simpleserver("$path/simpleserver");
 158         } elsif ($envname eq "maptoguest") {
 159                 return $self->setup_maptoguest("$path/maptoguest");
 160         } elsif ($envname eq "ktest") {
 161                 return $self->setup_ktest("$path/ktest");
 162         } elsif ($envname eq "member") {
 163                 if (not defined($self->{vars}->{s3dc})) {
 164                         if (not defined($self->setup_s3dc("$path/s3dc"))) {
 165                                 return undef;
 166                         }
 167                 }
 168                 return $self->setup_member("$path/member", $self->{vars}->{s3dc});
 169         } else {
 170                 return "UNKNOWN";
 171         }
 172 }
 173
 174 sub setup_s3dc($$)
 175 {
 176         my ($self, $path) = @_;
 177
 178         print "PROVISIONING S3DC...";
 179
 180         my $s3dc_options = "
 181         domain master = yes
 182         domain logons = yes
 183         lanman auth = yes
 184
 185         rpc_server:epmapper = external
 186         rpc_server:spoolss = external
 187         rpc_server:lsarpc = external
 188         rpc_server:samr = external
 189         rpc_server:netlogon = external
 190         rpc_server:register_embedded_np = yes
 191
 192         rpc_daemon:epmd = fork
 193         rpc_daemon:spoolssd = fork
 194         rpc_daemon:lsasd = fork
 195 ";
 196
 197         my $vars = $self->provision($path,
 198                                     "LOCALS3DC2",
 199                                     "locals3dc2pass",
 200                                     $s3dc_options);
 201
 202         $vars or return undef;
 203
 204         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 205                return undef;
 206         }
 207
 208         $vars->{DC_SERVER} = $vars->{SERVER};
 209         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 210         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 211         $vars->{DC_USERNAME} = $vars->{USERNAME};
 212         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 213
 214         $self->{vars}->{s3dc} = $vars;
 215
 216         return $vars;
 217 }
 218
 219 sub setup_member($$$)
 220 {
 221         my ($self, $prefix, $s3dcvars) = @_;
 222
 223         print "PROVISIONING MEMBER...";
 224
 225         my $member_options = "
 226         security = domain
 227         server signing = on
 228 ";
 229         my $ret = $self->provision($prefix,
 230                                    "LOCALMEMBER3",
 231                                    "localmember3pass",
 232                                    $member_options);
 233
 234         $ret or return undef;
 235
 236         my $net = Samba::bindir_path($self, "net");
 237         my $cmd = "";
 238         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 239         $cmd .= "$net join $ret->{CONFIGURATION} $s3dcvars->{DOMAIN} member";
 240         $cmd .= " -U$s3dcvars->{USERNAME}\%$s3dcvars->{PASSWORD}";
 241
 242         if (system($cmd) != 0) {
 243             warn("Join failed\n$cmd");
 244             return undef;
 245         }
 246
 247         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 248                return undef;
 249         }
 250
 251         $ret->{DC_SERVER} = $s3dcvars->{SERVER};
 252         $ret->{DC_SERVER_IP} = $s3dcvars->{SERVER_IP};
 253         $ret->{DC_NETBIOSNAME} = $s3dcvars->{NETBIOSNAME};
 254         $ret->{DC_USERNAME} = $s3dcvars->{USERNAME};
 255         $ret->{DC_PASSWORD} = $s3dcvars->{PASSWORD};
 256
 257         return $ret;
 258 }
 259
 260 sub setup_admember($$$$)
 261 {
 262         my ($self, $prefix, $dcvars) = @_;
 263
 264         # If we didn't build with ADS, pretend this env was never available
 265         if (not $self->have_ads()) {
 266                 return "UNKNOWN";
 267         }
 268
 269         print "PROVISIONING S3 AD MEMBER...";
 270
 271         my $member_options = "
 272         security = ads
 273         server signing = on
 274         workgroup = $dcvars->{DOMAIN}
 275         realm = $dcvars->{REALM}
 276 ";
 277
 278         my $ret = $self->provision($prefix,
 279                                    "LOCALADMEMBER",
 280                                    "loCalMemberPass",
 281                                    $member_options);
 282
 283         $ret or return undef;
 284
 285         close(USERMAP);
 286         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 287         $ret->{REALM} = $dcvars->{REALM};
 288
 289         my $ctx;
 290         my $prefix_abs = abs_path($prefix);
 291         $ctx = {};
 292         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 293         $ctx->{domain} = $dcvars->{DOMAIN};
 294         $ctx->{realm} = $dcvars->{REALM};
 295         $ctx->{dnsname} = lc($dcvars->{REALM});
 296         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 297         Samba::mk_krb5_conf($ctx, "");
 298
 299         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 300
 301         my $net = Samba::bindir_path($self, "net");
 302         my $cmd = "";
 303         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 304         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 305         $cmd .= "$net join $ret->{CONFIGURATION}";
 306         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 307
 308         if (system($cmd) != 0) {
 309             warn("Join failed\n$cmd");
 310             return undef;
 311         }
 312
 313         # We need world access to this share, as otherwise the domain
 314         # administrator from the AD domain provided by Samba4 can't
 315         # access the share for tests.
 316         chmod 0777, "$prefix/share";
 317
 318         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 319                 return undef;
 320         }
 321
 322         $ret->{DC_SERVER} = $dcvars->{SERVER};
 323         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 324         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 325         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 326         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 327
 328         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 329         $ret->{target} = $self;
 330
 331         return $ret;
 332 }
 333
 334 sub setup_admember_rfc2307($$$$)
 335 {
 336         my ($self, $prefix, $dcvars) = @_;
 337
 338         # If we didn't build with ADS, pretend this env was never available
 339         if (not $self->have_ads()) {
 340                 return "UNKNOWN";
 341         }
 342
 343         print "PROVISIONING S3 AD MEMBER WITH idmap_rfc2307 config...";
 344
 345         my $member_options = "
 346         security = ads
 347         server signing = on
 348         workgroup = $dcvars->{DOMAIN}
 349         realm = $dcvars->{REALM}
 350         idmap config $dcvars->{DOMAIN} : backend = rfc2307
 351         idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
 352         idmap config $dcvars->{DOMAIN} : ldap_server = ad
 353         idmap config $dcvars->{DOMAIN} : bind_path_user = ou=idmap,dc=samba,dc=example,dc=com
 354         idmap config $dcvars->{DOMAIN} : bind_path_group = ou=idmap,dc=samba,dc=example,dc=com
 355 ";
 356
 357         my $ret = $self->provision($prefix,
 358                                    "RFC2307MEMBER",
 359                                    "loCalMemberPass",
 360                                    $member_options);
 361
 362         $ret or return undef;
 363
 364         close(USERMAP);
 365         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 366         $ret->{REALM} = $dcvars->{REALM};
 367
 368         my $ctx;
 369         my $prefix_abs = abs_path($prefix);
 370         $ctx = {};
 371         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 372         $ctx->{domain} = $dcvars->{DOMAIN};
 373         $ctx->{realm} = $dcvars->{REALM};
 374         $ctx->{dnsname} = lc($dcvars->{REALM});
 375         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 376         Samba::mk_krb5_conf($ctx, "");
 377
 378         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 379
 380         my $net = Samba::bindir_path($self, "net");
 381         my $cmd = "";
 382         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 383         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 384         $cmd .= "$net join $ret->{CONFIGURATION}";
 385         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 386
 387         if (system($cmd) != 0) {
 388             warn("Join failed\n$cmd");
 389             return undef;
 390         }
 391
 392         # We need world access to this share, as otherwise the domain
 393         # administrator from the AD domain provided by Samba4 can't
 394         # access the share for tests.
 395         chmod 0777, "$prefix/share";
 396
 397         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 398                 return undef;
 399         }
 400
 401         $ret->{DC_SERVER} = $dcvars->{SERVER};
 402         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 403         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 404         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 405         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 406
 407         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 408         $ret->{target} = $self;
 409
 410         return $ret;
 411 }
 412
 413 sub setup_simpleserver($$)
 414 {
 415         my ($self, $path) = @_;
 416         my $vfs_modulesdir_abs = $ENV{VFSLIBDIR};
 417
 418         print "PROVISIONING server with security=share...";
 419
 420         my $prefix_abs = abs_path($path);
 421
 422         my $simpleserver_options = "
 423         lanman auth = yes
 424         vfs objects = $vfs_modulesdir_abs/xattr_tdb.so $vfs_modulesdir_abs/streams_depot.so
 425
 426 [vfs_aio_fork]
 427         path = $prefix_abs/share
 428         vfs objects = $vfs_modulesdir_abs/aio_fork.so
 429         read only = no
 430         vfs_aio_fork:erratic_testing_mode=yes
 431 ";
 432
 433         my $vars = $self->provision($path,
 434                                     "LOCALSHARE4",
 435                                     "local4pass",
 436                                     $simpleserver_options);
 437
 438         $vars or return undef;
 439
 440         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 441                return undef;
 442         }
 443
 444         $self->{vars}->{simpleserver} = $vars;
 445
 446         return $vars;
 447 }
 448
 449 sub setup_ktest($$$)
 450 {
 451         my ($self, $prefix) = @_;
 452
 453         # If we didn't build with ADS, pretend this env was never available
 454         if (not $self->have_ads()) {
 455                 return "UNKNOWN";
 456         }
 457
 458         print "PROVISIONING server with security=ads...";
 459
 460         my $ktest_options = "
 461         workgroup = KTEST
 462         realm = ktest.samba.example.com
 463         security = ads
 464         username map = $prefix/lib/username.map
 465         server signing = required
 466 ";
 467
 468         my $ret = $self->provision($prefix,
 469                                    "LOCALKTEST6",
 470                                    "localktest6pass",
 471                                    $ktest_options);
 472
 473         $ret or return undef;
 474
 475         my $ctx;
 476         my $prefix_abs = abs_path($prefix);
 477         $ctx = {};
 478         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 479         $ctx->{domain} = "KTEST";
 480         $ctx->{realm} = "KTEST.SAMBA.EXAMPLE.COM";
 481         $ctx->{dnsname} = lc($ctx->{realm});
 482         $ctx->{kdc_ipv4} = "0.0.0.0";
 483         Samba::mk_krb5_conf($ctx, "");
 484
 485         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 486
 487         open(USERMAP, ">$prefix/lib/username.map") or die("Unable to open $prefix/lib/username.map");
 488         print USERMAP "
 489 $ret->{USERNAME} = KTEST\\Administrator
 490 ";
 491         close(USERMAP);
 492
 493 #This is the secrets.tdb created by 'net ads join' from Samba3 to a
 494 #Samba4 DC with the same parameters as are being used here.  The
 495 #domain SID is S-1-5-21-1071277805-689288055-3486227160
 496
 497         system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb $prefix/private/secrets.tdb");
 498         chmod 0600, "$prefix/private/secrets.tdb";
 499
 500 #Make sure there's no old ntdb file.
 501         system("rm -f $prefix/private/secrets.ntdb");
 502
 503 #This uses a pre-calculated krb5 credentials cache, obtained by running Samba4 with:
 504 # "--option=kdc:service ticket lifetime=239232" "--option=kdc:user ticket lifetime=239232" "--option=kdc:renewal lifetime=239232"
 505 #
 506 #and having in krb5.conf:
 507 # ticket_lifetime = 799718400
 508 # renew_lifetime = 799718400
 509 #
 510 # The commands for the -2 keytab where were:
 511 # kinit administrator@KTEST.SAMBA.EXAMPLE.COM
 512 # kvno host/localktest6@KTEST.SAMBA.EXAMPLE.COM
 513 # kvno cifs/localktest6@KTEST.SAMBA.EXAMPLE.COM
 514 # kvno host/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 515 # kvno cifs/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 516 #
 517 # and then for the -3 keytab, I did
 518 #
 519 # net changetrustpw; kdestroy and the same again.
 520 #
 521 # This creates a credential cache with a very long lifetime (2036 at
 522 # at 2011-04), and shows that running 'net changetrustpw' does not
 523 # break existing logins (for the secrets.tdb method at least).
 524 #
 525
 526         $ret->{KRB5_CCACHE}="FILE:$prefix/krb5_ccache";
 527
 528         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-2 $prefix/krb5_ccache-2");
 529         chmod 0600, "$prefix/krb5_ccache-2";
 530
 531         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-3 $prefix/krb5_ccache-3");
 532         chmod 0600, "$prefix/krb5_ccache-3";
 533
 534         # We need world access to this share, as otherwise the domain
 535         # administrator from the AD domain provided by ktest can't
 536         # access the share for tests.
 537         chmod 0777, "$prefix/share";
 538
 539         if (not $self->check_or_start($ret, "yes", "no", "yes")) {
 540                return undef;
 541         }
 542         return $ret;
 543 }
 544
 545 sub setup_maptoguest($$)
 546 {
 547         my ($self, $path) = @_;
 548
 549         print "PROVISIONING maptoguest...";
 550
 551         my $options = "
 552 map to guest = bad user
 553 ";
 554
 555         my $vars = $self->provision($path,
 556                                     "maptoguest",
 557                                     "maptoguestpass",
 558                                     $options);
 559
 560         $vars or return undef;
 561
 562         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 563                return undef;
 564         }
 565
 566         $self->{vars}->{s3maptoguest} = $vars;
 567
 568         return $vars;
 569 }
 570
 571 sub stop_sig_term($$) {
 572         my ($self, $pid) = @_;
 573         kill("USR1", $pid) or kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 574 }
 575
 576 sub stop_sig_kill($$) {
 577         my ($self, $pid) = @_;
 578         kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 579 }
 580
 581 sub write_pid($$$)
 582 {
 583         my ($env_vars, $app, $pid) = @_;
 584
 585         open(PID, ">$env_vars->{PIDDIR}/timelimit.$app.pid");
 586         print PID $pid;
 587         close(PID);
 588 }
 589
 590 sub read_pid($$)
 591 {
 592         my ($env_vars, $app) = @_;
 593
 594         open(PID, "<$env_vars->{PIDDIR}/timelimit.$app.pid");
 595         my $pid = <PID>;
 596         close(PID);
 597         return $pid;
 598 }
 599
 600 sub check_or_start($$$$$) {
 601         my ($self, $env_vars, $nmbd, $winbindd, $smbd) = @_;
 602
 603         # use a pipe for stdin in the child processes. This allows
 604         # those processes to monitor the pipe for EOF to ensure they
 605         # exit when the test script exits
 606         pipe(STDIN_READER, $env_vars->{STDIN_PIPE});
 607
 608         unlink($env_vars->{NMBD_TEST_LOG});
 609         print "STARTING NMBD...";
 610         my $pid = fork();
 611         if ($pid == 0) {
 612                 open STDOUT, ">$env_vars->{NMBD_TEST_LOG}";
 613                 open STDERR, '>&STDOUT';
 614
 615                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 616
 617                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 618                 $ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
 619                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 620
 621                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 622                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 623                 $ENV{NSS_WRAPPER_WINBIND_SO_PATH} = $env_vars->{NSS_WRAPPER_WINBIND_SO_PATH};
 624
 625                 $ENV{UID_WRAPPER} = "1";
 626
 627                 if ($nmbd ne "yes") {
 628                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 629                                 my $signame = shift;
 630                                 print("Skip nmbd received signal $signame");
 631                                 exit 0;
 632                         };
 633                         sleep($self->{server_maxtime});
 634                         exit 0;
 635                 }
 636
 637                 my @optargs = ("-d0");
 638                 if (defined($ENV{NMBD_OPTIONS})) {
 639                         @optargs = split(/ /, $ENV{NMBD_OPTIONS});
 640                 }
 641
 642                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
 643
 644                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 645                 if(defined($ENV{NMBD_VALGRIND})) {
 646                         @preargs = split(/ /, $ENV{NMBD_VALGRIND});
 647                 }
 648
 649                 close($env_vars->{STDIN_PIPE});
 650                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 651
 652                 exec(@preargs, Samba::bindir_path($self, "nmbd"), "-F", "--no-process-group", "--log-stdout", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start nmbd: $!");
 653         }
 654         $env_vars->{NMBD_TL_PID} = $pid;
 655         write_pid($env_vars, "nmbd", $pid);
 656         print "DONE\n";
 657
 658         unlink($env_vars->{WINBINDD_TEST_LOG});
 659         print "STARTING WINBINDD...";
 660         $pid = fork();
 661         if ($pid == 0) {
 662                 open STDOUT, ">$env_vars->{WINBINDD_TEST_LOG}";
 663                 open STDERR, '>&STDOUT';
 664
 665                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 666
 667                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 668                 $ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
 669                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 670
 671                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 672                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 673                 $ENV{NSS_WRAPPER_WINBIND_SO_PATH} = $env_vars->{NSS_WRAPPER_WINBIND_SO_PATH};
 674
 675                 $ENV{UID_WRAPPER} = "1";
 676
 677                 if ($winbindd ne "yes") {
 678                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 679                                 my $signame = shift;
 680                                 print("Skip winbindd received signal $signame");
 681                                 exit 0;
 682                         };
 683                         sleep($self->{server_maxtime});
 684                         exit 0;
 685                 }
 686
 687                 my @optargs = ("-d0");
 688                 if (defined($ENV{WINBINDD_OPTIONS})) {
 689                         @optargs = split(/ /, $ENV{WINBINDD_OPTIONS});
 690                 }
 691
 692                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
 693
 694                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 695                 if(defined($ENV{WINBINDD_VALGRIND})) {
 696                         @preargs = split(/ /, $ENV{WINBINDD_VALGRIND});
 697                 }
 698
 699                 print "Starting winbindd with config $env_vars->{SERVERCONFFILE}\n";
 700
 701                 close($env_vars->{STDIN_PIPE});
 702                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 703
 704                 exec(@preargs, Samba::bindir_path($self, "winbindd"), "-F", "--no-process-group", "--stdout", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start winbindd: $!");
 705         }
 706         $env_vars->{WINBINDD_TL_PID} = $pid;
 707         write_pid($env_vars, "winbindd", $pid);
 708         print "DONE\n";
 709
 710         unlink($env_vars->{SMBD_TEST_LOG});
 711         print "STARTING SMBD...";
 712         $pid = fork();
 713         if ($pid == 0) {
 714                 open STDOUT, ">$env_vars->{SMBD_TEST_LOG}";
 715                 open STDERR, '>&STDOUT';
 716
 717                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 718
 719                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 720                 $ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
 721                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 722
 723                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 724                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 725                 $ENV{NSS_WRAPPER_WINBIND_SO_PATH} = $env_vars->{NSS_WRAPPER_WINBIND_SO_PATH};
 726
 727                 $ENV{UID_WRAPPER} = "1";
 728
 729                 if ($smbd ne "yes") {
 730                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 731                                 my $signame = shift;
 732                                 print("Skip smbd received signal $signame");
 733                                 exit 0;
 734                         };
 735                         sleep($self->{server_maxtime});
 736                         exit 0;
 737                 }
 738
 739                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "smbd");
 740                 my @optargs = ("-d0");
 741                 if (defined($ENV{SMBD_OPTIONS})) {
 742                         @optargs = split(/ /, $ENV{SMBD_OPTIONS});
 743                 }
 744                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 745                 if(defined($ENV{SMBD_VALGRIND})) {
 746                         @preargs = split(/ /,$ENV{SMBD_VALGRIND});
 747                 }
 748
 749                 close($env_vars->{STDIN_PIPE});
 750                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 751
 752                 exec(@preargs, Samba::bindir_path($self, "smbd"), "-F", "--no-process-group", "--log-stdout", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start smbd: $!");
 753         }
 754         $env_vars->{SMBD_TL_PID} = $pid;
 755         write_pid($env_vars, "smbd", $pid);
 756         print "DONE\n";
 757
 758         close(STDIN_READER);
 759
 760         return $self->wait_for_start($env_vars, $nmbd, $winbindd, $smbd);
 761 }
 762
 763 sub provision($$$$$$)
 764 {
 765         my ($self, $prefix, $server, $password, $extra_options, $no_delete_prefix) = @_;
 766
 767         ##
 768         ## setup the various environment variables we need
 769         ##
 770
 771         my $swiface = Samba::get_interface($server);
 772         my %ret = ();
 773         my $server_ip = "127.0.0.$swiface";
 774         my $domain = "SAMBA-TEST";
 775
 776         my $unix_name = ($ENV{USER} or $ENV{LOGNAME} or `PATH=/usr/ucb:$ENV{PATH} whoami`);
 777         chomp $unix_name;
 778         my $unix_uid = $>;
 779         my $unix_gids_str = $);
 780         my @unix_gids = split(" ", $unix_gids_str);
 781
 782         my $prefix_abs = abs_path($prefix);
 783         my $bindir_abs = abs_path($self->{bindir});
 784         my $vfs_modulesdir_abs = ($ENV{VFSLIBDIR} or $bindir_abs);
 785
 786         my $dns_host_file = "$ENV{SELFTEST_PREFIX}/dns_host_file";
 787
 788         my @dirs = ();
 789
 790         my $shrdir="$prefix_abs/share";
 791         push(@dirs,$shrdir);
 792
 793         my $libdir="$prefix_abs/lib";
 794         push(@dirs,$libdir);
 795
 796         my $piddir="$prefix_abs/pid";
 797         push(@dirs,$piddir);
 798
 799         my $privatedir="$prefix_abs/private";
 800         push(@dirs,$privatedir);
 801
 802         my $lockdir="$prefix_abs/lockdir";
 803         push(@dirs,$lockdir);
 804
 805         my $eventlogdir="$prefix_abs/lockdir/eventlog";
 806         push(@dirs,$eventlogdir);
 807
 808         my $logdir="$prefix_abs/logs";
 809         push(@dirs,$logdir);
 810
 811         my $driver32dir="$shrdir/W32X86";
 812         push(@dirs,$driver32dir);
 813
 814         my $driver64dir="$shrdir/x64";
 815         push(@dirs,$driver64dir);
 816
 817         my $driver40dir="$shrdir/WIN40";
 818         push(@dirs,$driver40dir);
 819
 820         my $ro_shrdir="$shrdir/root-tmp";
 821         push(@dirs,$ro_shrdir);
 822
 823         my $msdfs_shrdir="$shrdir/msdfsshare";
 824         push(@dirs,$msdfs_shrdir);
 825
 826         my $msdfs_deeppath="$msdfs_shrdir/deeppath";
 827         push(@dirs,$msdfs_deeppath);
 828
 829         # this gets autocreated by winbindd
 830         my $wbsockdir="$prefix_abs/winbindd";
 831         my $wbsockprivdir="$lockdir/winbindd_privileged";
 832
 833         my $nmbdsockdir="$prefix_abs/nmbd";
 834         unlink($nmbdsockdir);
 835
 836         ##
 837         ## create the test directory layout
 838         ##
 839         die ("prefix_abs = ''") if $prefix_abs eq "";
 840         die ("prefix_abs = '/'") if $prefix_abs eq "/";
 841
 842         mkdir($prefix_abs, 0777);
 843         print "CREATE TEST ENVIRONMENT IN '$prefix'...";
 844         if (not defined($no_delete_prefix) or not $no_delete_prefix) {
 845             system("rm -rf $prefix_abs/*");
 846         }
 847         mkdir($_, 0777) foreach(@dirs);
 848
 849         ##
 850         ## lockdir and piddir must be 0755
 851         ##
 852         chmod 0755, $lockdir;
 853         chmod 0755, $piddir;
 854
 855
 856         ##
 857         ## create ro and msdfs share layout
 858         ##
 859
 860         chmod 0755, $ro_shrdir;
 861         my $unreadable_file = "$ro_shrdir/unreadable_file";
 862         unless (open(UNREADABLE_FILE, ">$unreadable_file")) {
 863                 warn("Unable to open $unreadable_file");
 864                 return undef;
 865         }
 866         close(UNREADABLE_FILE);
 867         chmod 0600, $unreadable_file;
 868
 869         my $msdfs_target = "$ro_shrdir/msdfs-target";
 870         unless (open(MSDFS_TARGET, ">$msdfs_target")) {
 871                 warn("Unable to open $msdfs_target");
 872                 return undef;
 873         }
 874         close(MSDFS_TARGET);
 875         chmod 0666, $msdfs_target;
 876         symlink "msdfs:$server_ip\\ro-tmp", "$msdfs_shrdir/msdfs-src1";
 877         symlink "msdfs:$server_ip\\ro-tmp", "$msdfs_shrdir/deeppath/msdfs-src2";
 878
 879         my $conffile="$libdir/server.conf";
 880
 881         my $nss_wrapper_pl = "$ENV{PERL} $self->{srcdir}/lib/nss_wrapper/nss_wrapper.pl";
 882         my $nss_wrapper_passwd = "$privatedir/passwd";
 883         my $nss_wrapper_group = "$privatedir/group";
 884
 885         my $mod_printer_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/printing/modprinter.pl";
 886
 887         my @eventlog_list = ("dns server", "application");
 888
 889         ##
 890         ## calculate uids and gids
 891         ##
 892
 893         my ($max_uid, $max_gid);
 894         my ($uid_nobody, $uid_root, $uid_pdbtest);
 895         my ($gid_nobody, $gid_nogroup, $gid_root, $gid_domusers, $gid_domadmins);
 896
 897         if ($unix_uid < 0xffff - 2) {
 898                 $max_uid = 0xffff;
 899         } else {
 900                 $max_uid = $unix_uid;
 901         }
 902
 903         $uid_root = $max_uid - 1;
 904         $uid_nobody = $max_uid - 2;
 905         $uid_pdbtest = $max_uid - 3;
 906
 907         if ($unix_gids[0] < 0xffff - 3) {
 908                 $max_gid = 0xffff;
 909         } else {
 910                 $max_gid = $unix_gids[0];
 911         }
 912
 913         $gid_nobody = $max_gid - 1;
 914         $gid_nogroup = $max_gid - 2;
 915         $gid_root = $max_gid - 3;
 916         $gid_domusers = $max_gid - 4;
 917         $gid_domadmins = $max_gid - 5;
 918
 919         ##
 920         ## create conffile
 921         ##
 922
 923         unless (open(CONF, ">$conffile")) {
 924                 warn("Unable to open $conffile");
 925                 return undef;
 926         }
 927         print CONF "
 928 [global]
 929         netbios name = $server
 930         interfaces = $server_ip/8
 931         bind interfaces only = yes
 932         panic action = $self->{srcdir}/selftest/gdb_backtrace %d %\$(MAKE_TEST_BINARY)
 933         smbd:suicide mode = yes
 934
 935         workgroup = $domain
 936
 937         private dir = $privatedir
 938         pid directory = $piddir
 939         lock directory = $lockdir
 940         log file = $logdir/log.\%m
 941         log level = 1
 942         debug pid = yes
 943         max log size = 0
 944
 945         state directory = $lockdir
 946         cache directory = $lockdir
 947
 948         passdb backend = tdbsam
 949
 950         time server = yes
 951
 952         add user script =               $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
 953         add group script =              $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action add --name %g
 954         add machine script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
 955         add user to group script =      $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action add --member %u --name %g --group_path $nss_wrapper_group
 956         delete user script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action delete --name %u
 957         delete group script =           $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action delete --name %g
 958         delete user from group script = $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action delete --member %u --name %g --group_path $nss_wrapper_group
 959
 960         addprinter command =            $mod_printer_pl -a -s $conffile --
 961         deleteprinter command =         $mod_printer_pl -d -s $conffile --
 962
 963         eventlog list = application \"dns server\"
 964
 965         kernel oplocks = no
 966         kernel change notify = no
 967
 968         syslog = no
 969         printing = bsd
 970         printcap name = /dev/null
 971
 972         winbindd:socket dir = $wbsockdir
 973         nmbd:socket dir = $nmbdsockdir
 974         idmap config * : range = 100000-200000
 975         winbind enum users = yes
 976         winbind enum groups = yes
 977
 978 #       min receivefile size = 4000
 979
 980         read only = no
 981         server signing = auto
 982
 983         smbd:sharedelay = 100000
 984         smbd:writetimeupdatedelay = 500000
 985         map hidden = no
 986         map system = no
 987         map readonly = no
 988         store dos attributes = yes
 989         create mask = 755
 990         dos filemode = yes
 991         vfs objects = $vfs_modulesdir_abs/acl_xattr.so $vfs_modulesdir_abs/fake_acls.so $vfs_modulesdir_abs/xattr_tdb.so $vfs_modulesdir_abs/streams_depot.so
 992
 993         printing = vlp
 994         print command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb print %p %s
 995         lpq command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpq %p
 996         lp rm command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lprm %p %j
 997         lp pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lppause %p %j
 998         lp resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpresume %p %j
 999         queue pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queuepause %p
1000         queue resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queueresume %p
1001         lpq cache time = 0
1002
1003         ncalrpc dir = $prefix_abs/ncalrpc
1004         resolv:host file = $dns_host_file
1005
1006         # The samba3.blackbox.smbclient_s3 test uses this to test that
1007         # sending messages works, and that the %m sub works.
1008         message command = mv %s $shrdir/message.%m
1009
1010         # Begin extra options
1011         $extra_options
1012         # End extra options
1013
1014         #Include user defined custom parameters if set
1015 ";
1016
1017         if (defined($ENV{INCLUDE_CUSTOM_CONF})) {
1018                 print CONF "\t$ENV{INCLUDE_CUSTOM_CONF}\n";
1019         }
1020
1021         print CONF "
1022 [tmp]
1023         path = $shrdir
1024         comment = smb username is [%U]
1025 [tmpenc]
1026         path = $shrdir
1027         comment = encrypt smb username is [%U]
1028         smb encrypt = required
1029         vfs objects = $vfs_modulesdir_abs/dirsort.so
1030 [tmpguest]
1031         path = $shrdir
1032         guest ok = yes
1033 [guestonly]
1034         path = $shrdir
1035         guest only = yes
1036         guest ok = yes
1037 [forceuser]
1038         path = $shrdir
1039         force user = $unix_name
1040         guest ok = yes
1041 [forcegroup]
1042         path = $shrdir
1043         force group = nogroup
1044         guest ok = yes
1045 [ro-tmp]
1046         path = $ro_shrdir
1047         guest ok = yes
1048 [write-list-tmp]
1049         path = $shrdir
1050         read only = yes
1051         write list = $unix_name
1052 [valid-users-tmp]
1053         path = $shrdir
1054         valid users = $unix_name
1055 [msdfs-share]
1056         path = $msdfs_shrdir
1057         msdfs root = yes
1058         guest ok = yes
1059 [hideunread]
1060         copy = tmp
1061         hide unreadable = yes
1062 [tmpcase]
1063         copy = tmp
1064         case sensitive = yes
1065 [hideunwrite]
1066         copy = tmp
1067         hide unwriteable files = yes
1068 [durable]
1069         copy = tmp
1070         kernel share modes = no
1071         kernel oplocks = no
1072         posix locking = no
1073 [print1]
1074         copy = tmp
1075         printable = yes
1076
1077 [print2]
1078         copy = print1
1079 [print3]
1080         copy = print1
1081         default devmode = no
1082 [lp]
1083         copy = print1
1084 [xcopy_share]
1085         path = $shrdir
1086         comment = smb username is [%U]
1087         create mask = 777
1088         force create mode = 777
1089 [posix_share]
1090         path = $shrdir
1091         comment = smb username is [%U]
1092         create mask = 0777
1093         force create mode = 0
1094         directory mask = 0777
1095         force directory mode = 0
1096         vfs objects = $vfs_modulesdir_abs/xattr_tdb.so
1097
1098 [print\$]
1099         copy = tmp
1100         ";
1101         close(CONF);
1102
1103         ##
1104         ## create a test account
1105         ##
1106
1107         unless (open(PASSWD, ">$nss_wrapper_passwd")) {
1108            warn("Unable to open $nss_wrapper_passwd");
1109            return undef;
1110         }
1111         print PASSWD "nobody:x:$uid_nobody:$gid_nobody:nobody gecos:$prefix_abs:/bin/false
1112 $unix_name:x:$unix_uid:$unix_gids[0]:$unix_name gecos:$prefix_abs:/bin/false
1113 pdbtest:x:$uid_pdbtest:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
1114 ";
1115         if ($unix_uid != 0) {
1116                 print PASSWD "root:x:$uid_root:$gid_root:root gecos:$prefix_abs:/bin/false";
1117         }
1118         close(PASSWD);
1119
1120         unless (open(GROUP, ">$nss_wrapper_group")) {
1121              warn("Unable to open $nss_wrapper_group");
1122              return undef;
1123         }
1124         print GROUP "nobody:x:$gid_nobody:
1125 nogroup:x:$gid_nogroup:nobody
1126 $unix_name-group:x:$unix_gids[0]:
1127 domusers:X:$gid_domusers:
1128 domadmins:X:$gid_domadmins:
1129 ";
1130         if ($unix_gids[0] != 0) {
1131                 print GROUP "root:x:$gid_root:";
1132         }
1133
1134         close(GROUP);
1135
1136         foreach my $evlog (@eventlog_list) {
1137                 my $evlogtdb = "$eventlogdir/$evlog.tdb";
1138                 open(EVENTLOG, ">$evlogtdb") or die("Unable to open $evlogtdb");
1139                 close(EVENTLOG);
1140         }
1141
1142         $ENV{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1143         $ENV{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1144
1145         my $cmd = Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $unix_name > /dev/null";
1146         unless (open(PWD, "|$cmd")) {
1147              warn("Unable to set password for test account\n$cmd");
1148              return undef;
1149         }
1150         print PWD "$password\n$password\n";
1151         unless (close(PWD)) {
1152              warn("Unable to set password for test account\n$cmd");
1153              return undef;
1154         }
1155         print "DONE\n";
1156
1157         open(DNS_UPDATE_LIST, ">$prefix/dns_update_list") or die("Unable to open $$prefix/dns_update_list");
1158         print DNS_UPDATE_LIST "A $server. $server_ip";
1159         close(DNS_UPDATE_LIST);
1160
1161         if (system("$ENV{SRCDIR_ABS}/source4/scripting/bin/samba_dnsupdate --all-interfaces --use-file=$dns_host_file -s $conffile --update-list=$prefix/dns_update_list --no-substiutions --no-credentials") != 0) {
1162                 die "Unable to update hostname into $dns_host_file";
1163         }
1164
1165         $ret{SERVER_IP} = $server_ip;
1166         $ret{NMBD_TEST_LOG} = "$prefix/nmbd_test.log";
1167         $ret{NMBD_TEST_LOG_POS} = 0;
1168         $ret{WINBINDD_TEST_LOG} = "$prefix/winbindd_test.log";
1169         $ret{WINBINDD_TEST_LOG_POS} = 0;
1170         $ret{SMBD_TEST_LOG} = "$prefix/smbd_test.log";
1171         $ret{SMBD_TEST_LOG_POS} = 0;
1172         $ret{SERVERCONFFILE} = $conffile;
1173         $ret{CONFIGURATION} ="-s $conffile";
1174         $ret{SERVER} = $server;
1175         $ret{USERNAME} = $unix_name;
1176         $ret{USERID} = $unix_uid;
1177         $ret{DOMAIN} = $domain;
1178         $ret{NETBIOSNAME} = $server;
1179         $ret{PASSWORD} = $password;
1180         $ret{PIDDIR} = $piddir;
1181         $ret{WINBINDD_SOCKET_DIR} = $wbsockdir;
1182         $ret{WINBINDD_PRIV_PIPE_DIR} = $wbsockprivdir;
1183         $ret{NMBD_SOCKET_DIR} = $nmbdsockdir;
1184         $ret{SOCKET_WRAPPER_DEFAULT_IFACE} = $swiface;
1185         $ret{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1186         $ret{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1187         $ret{NSS_WRAPPER_WINBIND_SO_PATH} = Samba::nss_wrapper_winbind_so_path($self);
1188         $ret{LOCAL_PATH} = "$shrdir";
1189
1190         return \%ret;
1191 }
1192
1193 sub wait_for_start($$$$$)
1194 {
1195         my ($self, $envvars, $nmbd, $winbindd, $smbd) = @_;
1196         my $ret;
1197
1198         if ($nmbd eq "yes") {
1199             # give time for nbt server to register its names
1200             print "delaying for nbt name registration\n";
1201             sleep(10);
1202             # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
1203             my $nmblookup = Samba::bindir_path($self, "nmblookup3");
1204             system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
1205             system("$nmblookup $envvars->{CONFIGURATION} __SAMBA__");
1206             system("$nmblookup $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
1207             system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
1208             system("$nmblookup $envvars->{CONFIGURATION} $envvars->{SERVER}");
1209         }
1210
1211         if ($winbindd eq "yes") {
1212             print "checking for winbindd\n";
1213             my $count = 0;
1214             do {
1215                 $ret = system("WINBINDD_SOCKET_DIR=" . $envvars->{WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " -p");
1216                 if ($ret != 0) {
1217                     sleep(2);
1218                 }
1219                 $count++;
1220             } while ($ret != 0 && $count < 10);
1221             if ($count == 10) {
1222                 print "WINBINDD not reachable after 20 seconds\n";
1223                 teardown_env($self, $envvars);
1224                 return 0;
1225             }
1226         }
1227
1228         if ($smbd eq "yes") {
1229             # make sure smbd is also up set
1230             print "wait for smbd\n";
1231
1232             my $count = 0;
1233             do {
1234                 $ret = system(Samba::bindir_path($self, "smbclient3") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
1235                 if ($ret != 0) {
1236                     sleep(2);
1237                 }
1238                 $count++
1239             } while ($ret != 0 && $count < 10);
1240             if ($count == 10) {
1241                 print "SMBD failed to start up in a reasonable time (20sec)\n";
1242                 teardown_env($self, $envvars);
1243                 return 0;
1244             }
1245         }
1246
1247         # Ensure we have domain users mapped.
1248         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=513 unixgroup=domusers type=domain");
1249         if ($ret != 0) {
1250             return 1;
1251         }
1252         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=512 unixgroup=domadmins type=domain");
1253         if ($ret != 0) {
1254             return 1;
1255         }
1256
1257         if ($winbindd eq "yes") {
1258             # note: creating builtin groups requires winbindd for the
1259             # unix id allocator
1260             $ret = system("WINBINDD_SOCKET_DIR=" . $envvars->{WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} sam createbuiltingroup Users");
1261             if ($ret != 0) {
1262                 print "Failed to create BUILTIN\\Users group\n";
1263                 return 0;
1264             }
1265             my $count = 0;
1266             do {
1267                 system(Samba::bindir_path($self, "net") . " $envvars->{CONFIGURATION} cache flush");
1268                 $ret = system("WINBINDD_SOCKET_DIR=" . $envvars->{WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --sid-to-gid=S-1-5-32-545");
1269                 if ($ret != 0) {
1270                     sleep(2);
1271                 }
1272                 $count++;
1273             } while ($ret != 0 && $count < 10);
1274             if ($count == 10) {
1275                 print "WINBINDD not reachable after 20 seconds\n";
1276                 teardown_env($self, $envvars);
1277                 return 0;
1278             }
1279         }
1280
1281         print $self->getlog_env($envvars);
1282
1283         return 1;
1284 }
1285
1286 1;