selftest/target/Samba3.pm

   1 #!/usr/bin/perl
   2 # Bootstrap Samba and run a number of tests against it.
   3 # Copyright (C) 2005-2007 Jelmer Vernooij <jelmer@samba.org>
   4 # Published under the GNU GPL, v3 or later.
   5
   6 package Samba3;
   7
   8 use strict;
   9 use Cwd qw(abs_path);
  10 use FindBin qw($RealBin);
  11 use POSIX;
  12 use target::Samba;
  13
  14 sub have_ads($) {
  15         my ($self) = @_;
  16         my $found_ads = 0;
  17         my $smbd_build_options = Samba::bindir_path($self, "smbd") . " -b|";
  18         open(IN, $smbd_build_options) or die("Unable to run $smbd_build_options: $!");
  19
  20         while (<IN>) {
  21                 if (/WITH_ADS/) {
  22                        $found_ads = 1;
  23                 }
  24         }
  25         close IN;
  26
  27         # If we were not built with ADS support, pretend we were never even available
  28         print "smbd does not have ADS support\n" unless $found_ads;
  29         return $found_ads;
  30 }
  31
  32 # return smb.conf parameters applicable to @path, based on the underlying
  33 # filesystem type
  34 sub get_fs_specific_conf($$)
  35 {
  36         my ($self, $path) = @_;
  37         my $mods = "";
  38         my $stat_out = `stat --file-system $path` or return "";
  39
  40         if ($stat_out =~ m/Type:\s+btrfs/) {
  41                 $mods .= "btrfs ";
  42         }
  43
  44         if ($mods) {
  45                 return "vfs objects = $mods";
  46         }
  47
  48         return undef;
  49 }
  50
  51 sub new($$) {
  52         my ($classname, $bindir, $srcdir, $server_maxtime) = @_;
  53         my $self = { vars => {},
  54                      bindir => $bindir,
  55                      srcdir => $srcdir,
  56                      server_maxtime => $server_maxtime
  57         };
  58         bless $self;
  59         return $self;
  60 }
  61
  62 sub teardown_env($$)
  63 {
  64         my ($self, $envvars) = @_;
  65         my $count = 0;
  66
  67         # This should cause smbd to terminate gracefully
  68         close($envvars->{STDIN_PIPE});
  69
  70         my $smbdpid = $envvars->{SMBD_TL_PID};
  71         my $nmbdpid = $envvars->{NMBD_TL_PID};
  72         my $winbinddpid = $envvars->{WINBINDD_TL_PID};
  73
  74         # This should give it time to write out the gcov data
  75         until ($count > 20) {
  76             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  77             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
  78             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
  79             if ($smbdchild == -1
  80                 && $nmbdchild == -1
  81                 && $winbinddchild == -1) {
  82                 last;
  83             }
  84             sleep(1);
  85             $count++;
  86         }
  87
  88         if ($count <= 20 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
  89             return;
  90         }
  91
  92         $self->stop_sig_term($smbdpid);
  93         $self->stop_sig_term($nmbdpid);
  94         $self->stop_sig_term($winbinddpid);
  95
  96         $count = 0;
  97         until ($count > 10) {
  98             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  99             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
 100             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
 101             if ($smbdchild == -1
 102                 && $nmbdchild == -1
 103                 && $winbinddchild == -1) {
 104                 last;
 105             }
 106             sleep(1);
 107             $count++;
 108         }
 109
 110         if ($count <= 10 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
 111             return;
 112         }
 113
 114         warn("timelimit process did not quit on SIGTERM, sending SIGKILL");
 115         $self->stop_sig_kill($smbdpid);
 116         $self->stop_sig_kill($nmbdpid);
 117         $self->stop_sig_kill($winbinddpid);
 118
 119         return 0;
 120 }
 121
 122 sub getlog_env_app($$$)
 123 {
 124         my ($self, $envvars, $name) = @_;
 125
 126         my $title = "$name LOG of: $envvars->{NETBIOSNAME}\n";
 127         my $out = $title;
 128
 129         open(LOG, "<".$envvars->{$name."_TEST_LOG"});
 130
 131         seek(LOG, $envvars->{$name."_TEST_LOG_POS"}, SEEK_SET);
 132         while (<LOG>) {
 133                 $out .= $_;
 134         }
 135         $envvars->{$name."_TEST_LOG_POS"} = tell(LOG);
 136         close(LOG);
 137
 138         return "" if $out eq $title;
 139
 140         return $out;
 141 }
 142
 143 sub getlog_env($$)
 144 {
 145         my ($self, $envvars) = @_;
 146         my $ret = "";
 147
 148         $ret .= $self->getlog_env_app($envvars, "SMBD");
 149         $ret .= $self->getlog_env_app($envvars, "NMBD");
 150         $ret .= $self->getlog_env_app($envvars, "WINBINDD");
 151
 152         return $ret;
 153 }
 154
 155 sub check_env($$)
 156 {
 157         my ($self, $envvars) = @_;
 158
 159         my $childpid = waitpid(-1, WNOHANG);
 160
 161         # TODO ...
 162         return 1;
 163 }
 164
 165 sub setup_env($$$)
 166 {
 167         my ($self, $envname, $path) = @_;
 168
 169         $ENV{ENVNAME} = $envname;
 170
 171         if (defined($self->{vars}->{$envname})) {
 172                 return $self->{vars}->{$envname};
 173         }
 174
 175         if ($envname eq "nt4_dc") {
 176                 return $self->setup_nt4_dc("$path/nt4_dc");
 177         } elsif ($envname eq "nt4_dc_schannel") {
 178                 return $self->setup_nt4_dc_schannel("$path/nt4_dc_schannel");
 179         } elsif ($envname eq "simpleserver") {
 180                 return $self->setup_simpleserver("$path/simpleserver");
 181         } elsif ($envname eq "fileserver") {
 182                 return $self->setup_fileserver("$path/fileserver");
 183         } elsif ($envname eq "maptoguest") {
 184                 return $self->setup_maptoguest("$path/maptoguest");
 185         } elsif ($envname eq "ktest") {
 186                 return $self->setup_ktest("$path/ktest");
 187         } elsif ($envname eq "nt4_member") {
 188                 if (not defined($self->{vars}->{nt4_dc})) {
 189                         if (not defined($self->setup_nt4_dc("$path/nt4_dc"))) {
 190                                 return undef;
 191                         }
 192                 }
 193                 return $self->setup_nt4_member("$path/nt4_member", $self->{vars}->{nt4_dc});
 194         } else {
 195                 return "UNKNOWN";
 196         }
 197 }
 198
 199 sub setup_nt4_dc($$)
 200 {
 201         my ($self, $path) = @_;
 202
 203         print "PROVISIONING NT4 DC...";
 204
 205         my $nt4_dc_options = "
 206         domain master = yes
 207         domain logons = yes
 208         lanman auth = yes
 209
 210         rpc_server:epmapper = external
 211         rpc_server:spoolss = external
 212         rpc_server:lsarpc = external
 213         rpc_server:samr = external
 214         rpc_server:netlogon = external
 215         rpc_server:register_embedded_np = yes
 216         rpc_server:FssagentRpc = external
 217
 218         rpc_daemon:epmd = fork
 219         rpc_daemon:spoolssd = fork
 220         rpc_daemon:lsasd = fork
 221         rpc_daemon:fssd = fork
 222         fss: sequence timeout = 1
 223 ";
 224
 225         my $vars = $self->provision($path,
 226                                     "LOCALNT4DC2",
 227                                     "localntdc2pass",
 228                                     $nt4_dc_options);
 229
 230         $vars or return undef;
 231
 232         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 233                return undef;
 234         }
 235
 236         $vars->{DC_SERVER} = $vars->{SERVER};
 237         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 238         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 239         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 240         $vars->{DC_USERNAME} = $vars->{USERNAME};
 241         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 242
 243         $self->{vars}->{nt4_dc} = $vars;
 244
 245         return $vars;
 246 }
 247
 248 sub setup_nt4_dc_schannel($$)
 249 {
 250         my ($self, $path) = @_;
 251
 252         print "PROVISIONING NT4 DC WITH SERVER SCHANNEL ...";
 253
 254         my $pdc_options = "
 255         domain master = yes
 256         domain logons = yes
 257         lanman auth = yes
 258
 259         rpc_server:epmapper = external
 260         rpc_server:spoolss = external
 261         rpc_server:lsarpc = external
 262         rpc_server:samr = external
 263         rpc_server:netlogon = external
 264         rpc_server:register_embedded_np = yes
 265
 266         rpc_daemon:epmd = fork
 267         rpc_daemon:spoolssd = fork
 268         rpc_daemon:lsasd = fork
 269
 270         server schannel = yes
 271 ";
 272
 273         my $vars = $self->provision($path,
 274                                     "LOCALNT4DC9",
 275                                     "localntdc9pass",
 276                                     $pdc_options);
 277
 278         $vars or return undef;
 279
 280         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 281                return undef;
 282         }
 283
 284         $vars->{DC_SERVER} = $vars->{SERVER};
 285         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 286         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 287         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 288         $vars->{DC_USERNAME} = $vars->{USERNAME};
 289         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 290
 291         $self->{vars}->{nt4_dc_schannel} = $vars;
 292
 293         return $vars;
 294 }
 295
 296 sub setup_nt4_member($$$)
 297 {
 298         my ($self, $prefix, $nt4_dc_vars) = @_;
 299         my $count = 0;
 300         my $rc;
 301
 302         print "PROVISIONING MEMBER...";
 303
 304         my $member_options = "
 305         security = domain
 306         server signing = on
 307         dbwrap_tdb_mutexes:* = yes
 308 ";
 309         my $ret = $self->provision($prefix,
 310                                    "LOCALNT4MEMBER3",
 311                                    "localnt4member3pass",
 312                                    $member_options);
 313
 314         $ret or return undef;
 315
 316         my $nmblookup = Samba::bindir_path($self, "nmblookup");
 317         do {
 318                 print "Waiting for the LOGON SERVER registration ...\n";
 319                 $rc = system("$nmblookup $ret->{CONFIGURATION} $ret->{DOMAIN}\#1c");
 320                 if ($rc != 0) {
 321                         sleep(1);
 322                 }
 323                 $count++;
 324         } while ($rc != 0 && $count < 10);
 325         if ($count == 10) {
 326                 print "NMBD not reachable after 10 retries\n";
 327                 teardown_env($self, $ret);
 328                 return 0;
 329         }
 330
 331         my $net = Samba::bindir_path($self, "net");
 332         my $cmd = "";
 333         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 334         $cmd .= "$net join $ret->{CONFIGURATION} $nt4_dc_vars->{DOMAIN} member";
 335         $cmd .= " -U$nt4_dc_vars->{USERNAME}\%$nt4_dc_vars->{PASSWORD}";
 336
 337         if (system($cmd) != 0) {
 338             warn("Join failed\n$cmd");
 339             return undef;
 340         }
 341
 342         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 343                return undef;
 344         }
 345
 346         $ret->{DC_SERVER} = $nt4_dc_vars->{SERVER};
 347         $ret->{DC_SERVER_IP} = $nt4_dc_vars->{SERVER_IP};
 348         $ret->{DC_SERVER_IPV6} = $nt4_dc_vars->{SERVER_IPV6};
 349         $ret->{DC_NETBIOSNAME} = $nt4_dc_vars->{NETBIOSNAME};
 350         $ret->{DC_USERNAME} = $nt4_dc_vars->{USERNAME};
 351         $ret->{DC_PASSWORD} = $nt4_dc_vars->{PASSWORD};
 352
 353         return $ret;
 354 }
 355
 356 sub setup_admember($$$$)
 357 {
 358         my ($self, $prefix, $dcvars) = @_;
 359
 360         # If we didn't build with ADS, pretend this env was never available
 361         if (not $self->have_ads()) {
 362                 return "UNKNOWN";
 363         }
 364
 365         print "PROVISIONING S3 AD MEMBER...";
 366
 367         my $member_options = "
 368         security = ads
 369         server signing = on
 370         workgroup = $dcvars->{DOMAIN}
 371         realm = $dcvars->{REALM}
 372 ";
 373
 374         my $ret = $self->provision($prefix,
 375                                    "LOCALADMEMBER",
 376                                    "loCalMemberPass",
 377                                    $member_options,
 378                                    $dcvars->{SERVER_IP},
 379                                    $dcvars->{SERVER_IPV6});
 380
 381         $ret or return undef;
 382
 383         close(USERMAP);
 384         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 385         $ret->{REALM} = $dcvars->{REALM};
 386
 387         my $ctx;
 388         my $prefix_abs = abs_path($prefix);
 389         $ctx = {};
 390         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 391         $ctx->{domain} = $dcvars->{DOMAIN};
 392         $ctx->{realm} = $dcvars->{REALM};
 393         $ctx->{dnsname} = lc($dcvars->{REALM});
 394         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 395         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 396         Samba::mk_krb5_conf($ctx, "");
 397
 398         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 399
 400         my $net = Samba::bindir_path($self, "net");
 401         my $cmd = "";
 402         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 403         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 404                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 405         } else {
 406                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 407         }
 408         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 409         $cmd .= "$net join $ret->{CONFIGURATION}";
 410         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 411
 412         if (system($cmd) != 0) {
 413             warn("Join failed\n$cmd");
 414             return undef;
 415         }
 416
 417         # We need world access to this share, as otherwise the domain
 418         # administrator from the AD domain provided by Samba4 can't
 419         # access the share for tests.
 420         chmod 0777, "$prefix/share";
 421
 422         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 423                 return undef;
 424         }
 425
 426         $ret->{DC_SERVER} = $dcvars->{SERVER};
 427         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 428         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 429         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 430         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 431         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 432
 433         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 434         $ret->{target} = $self;
 435
 436         return $ret;
 437 }
 438
 439 sub setup_admember_rfc2307($$$$)
 440 {
 441         my ($self, $prefix, $dcvars) = @_;
 442
 443         # If we didn't build with ADS, pretend this env was never available
 444         if (not $self->have_ads()) {
 445                 return "UNKNOWN";
 446         }
 447
 448         print "PROVISIONING S3 AD MEMBER WITH idmap_rfc2307 config...";
 449
 450         my $member_options = "
 451         security = ads
 452         server signing = on
 453         workgroup = $dcvars->{DOMAIN}
 454         realm = $dcvars->{REALM}
 455         idmap config $dcvars->{DOMAIN} : backend = rfc2307
 456         idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
 457         idmap config $dcvars->{DOMAIN} : ldap_server = ad
 458         idmap config $dcvars->{DOMAIN} : bind_path_user = ou=idmap,dc=samba,dc=example,dc=com
 459         idmap config $dcvars->{DOMAIN} : bind_path_group = ou=idmap,dc=samba,dc=example,dc=com
 460 ";
 461
 462         my $ret = $self->provision($prefix,
 463                                    "RFC2307MEMBER",
 464                                    "loCalMemberPass",
 465                                    $member_options,
 466                                    $dcvars->{SERVER_IP},
 467                                    $dcvars->{SERVER_IPV6});
 468
 469         $ret or return undef;
 470
 471         close(USERMAP);
 472         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 473         $ret->{REALM} = $dcvars->{REALM};
 474
 475         my $ctx;
 476         my $prefix_abs = abs_path($prefix);
 477         $ctx = {};
 478         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 479         $ctx->{domain} = $dcvars->{DOMAIN};
 480         $ctx->{realm} = $dcvars->{REALM};
 481         $ctx->{dnsname} = lc($dcvars->{REALM});
 482         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 483         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 484         Samba::mk_krb5_conf($ctx, "");
 485
 486         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 487
 488         my $net = Samba::bindir_path($self, "net");
 489         my $cmd = "";
 490         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 491         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 492                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 493         } else {
 494                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 495         }
 496         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 497         $cmd .= "$net join $ret->{CONFIGURATION}";
 498         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 499
 500         if (system($cmd) != 0) {
 501             warn("Join failed\n$cmd");
 502             return undef;
 503         }
 504
 505         # We need world access to this share, as otherwise the domain
 506         # administrator from the AD domain provided by Samba4 can't
 507         # access the share for tests.
 508         chmod 0777, "$prefix/share";
 509
 510         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 511                 return undef;
 512         }
 513
 514         $ret->{DC_SERVER} = $dcvars->{SERVER};
 515         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 516         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 517         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 518         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 519         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 520
 521         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 522         $ret->{target} = $self;
 523
 524         return $ret;
 525 }
 526
 527 sub setup_simpleserver($$)
 528 {
 529         my ($self, $path) = @_;
 530
 531         print "PROVISIONING simple server...";
 532
 533         my $prefix_abs = abs_path($path);
 534
 535         my $simpleserver_options = "
 536         lanman auth = yes
 537         vfs objects = xattr_tdb streams_depot
 538         change notify = no
 539
 540 [vfs_aio_fork]
 541         path = $prefix_abs/share
 542         vfs objects = aio_fork
 543         read only = no
 544         vfs_aio_fork:erratic_testing_mode=yes
 545 ";
 546
 547         my $vars = $self->provision($path,
 548                                     "LOCALSHARE4",
 549                                     "local4pass",
 550                                     $simpleserver_options);
 551
 552         $vars or return undef;
 553
 554         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 555                return undef;
 556         }
 557
 558         $self->{vars}->{simpleserver} = $vars;
 559
 560         return $vars;
 561 }
 562
 563 sub setup_fileserver($$)
 564 {
 565         my ($self, $path) = @_;
 566         my $prefix_abs = abs_path($path);
 567         my $srcdir_abs = abs_path($self->{srcdir});
 568
 569         print "PROVISIONING file server ...\n";
 570
 571         my @dirs = ();
 572
 573         mkdir($prefix_abs, 0777);
 574
 575         my $share_dir="$prefix_abs/share";
 576
 577         # Create share directory structure
 578         my $lower_case_share_dir="$share_dir/lower-case";
 579         push(@dirs, $lower_case_share_dir);
 580
 581         my $lower_case_share_dir_30000="$share_dir/lower-case-30000";
 582         push(@dirs, $lower_case_share_dir_30000);
 583
 584         my $dfree_share_dir="$share_dir/dfree";
 585         push(@dirs, $dfree_share_dir);
 586
 587         my $valid_users_sharedir="$share_dir/valid_users";
 588         push(@dirs,$valid_users_sharedir);
 589
 590         my $fileserver_options = "
 591 [lowercase]
 592         path = $lower_case_share_dir
 593         comment = smb username is [%U]
 594         case sensitive = True
 595         default case = lower
 596         preserve case = no
 597         short preserve case = no
 598 [lowercase-30000]
 599         path = $lower_case_share_dir_30000
 600         comment = smb username is [%U]
 601         case sensitive = True
 602         default case = lower
 603         preserve case = no
 604         short preserve case = no
 605 [dfree]
 606         path = $dfree_share_dir
 607         comment = smb username is [%U]
 608         dfree command = $srcdir_abs/testprogs/blackbox/dfree.sh
 609 [valid-users-access]
 610         path = $valid_users_sharedir
 611         valid users = +userdup
 612         ";
 613
 614         my $vars = $self->provision($path,
 615                                     "FILESERVER",
 616                                     "fileserver",
 617                                     $fileserver_options,
 618                                     undef,
 619                                     undef,
 620                                     1);
 621
 622         $vars or return undef;
 623
 624         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 625                return undef;
 626         }
 627
 628         $self->{vars}->{fileserver} = $vars;
 629
 630         mkdir($_, 0777) foreach(@dirs);
 631
 632         ## Create case sensitive lower case share dir
 633         foreach my $file ('a'..'z') {
 634                 my $full_path = $lower_case_share_dir . '/' . $file;
 635                 open my $fh, '>', $full_path;
 636                 # Add some content to file
 637                 print $fh $full_path;
 638                 close $fh;
 639         }
 640
 641         for (my $file = 1; $file < 51; ++$file) {
 642                 my $full_path = $lower_case_share_dir . '/' . $file;
 643                 open my $fh, '>', $full_path;
 644                 # Add some content to file
 645                 print $fh $full_path;
 646                 close $fh;
 647         }
 648
 649         # Create content for 30000 share
 650         foreach my $file ('a'..'z') {
 651                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
 652                 open my $fh, '>', $full_path;
 653                 # Add some content to file
 654                 print $fh $full_path;
 655                 close $fh;
 656         }
 657
 658         for (my $file = 1; $file < 30001; ++$file) {
 659                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
 660                 open my $fh, '>', $full_path;
 661                 # Add some content to file
 662                 print $fh $full_path;
 663                 close $fh;
 664         }
 665
 666         ##
 667         ## create a listable file in valid_users_share
 668         ##
 669         my $valid_users_target = "$valid_users_sharedir/foo";
 670         unless (open(VALID_USERS_TARGET, ">$valid_users_target")) {
 671                 warn("Unable to open $valid_users_target");
 672                 return undef;
 673         }
 674         close(VALID_USERS_TARGET);
 675         chmod 0644, $valid_users_target;
 676
 677         return $vars;
 678 }
 679
 680 sub setup_ktest($$$)
 681 {
 682         my ($self, $prefix) = @_;
 683
 684         # If we didn't build with ADS, pretend this env was never available
 685         if (not $self->have_ads()) {
 686                 return "UNKNOWN";
 687         }
 688
 689         print "PROVISIONING server with security=ads...";
 690
 691         my $ktest_options = "
 692         workgroup = KTEST
 693         realm = ktest.samba.example.com
 694         security = ads
 695         username map = $prefix/lib/username.map
 696         server signing = required
 697 ";
 698
 699         my $ret = $self->provision($prefix,
 700                                    "LOCALKTEST6",
 701                                    "localktest6pass",
 702                                    $ktest_options);
 703
 704         $ret or return undef;
 705
 706         my $ctx;
 707         my $prefix_abs = abs_path($prefix);
 708         $ctx = {};
 709         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 710         $ctx->{domain} = "KTEST";
 711         $ctx->{realm} = "KTEST.SAMBA.EXAMPLE.COM";
 712         $ctx->{dnsname} = lc($ctx->{realm});
 713         $ctx->{kdc_ipv4} = "0.0.0.0";
 714         $ctx->{kdc_ipv6} = "::";
 715         Samba::mk_krb5_conf($ctx, "");
 716
 717         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 718
 719         open(USERMAP, ">$prefix/lib/username.map") or die("Unable to open $prefix/lib/username.map");
 720         print USERMAP "
 721 $ret->{USERNAME} = KTEST\\Administrator
 722 ";
 723         close(USERMAP);
 724
 725 #This is the secrets.tdb created by 'net ads join' from Samba3 to a
 726 #Samba4 DC with the same parameters as are being used here.  The
 727 #domain SID is S-1-5-21-1071277805-689288055-3486227160
 728
 729         system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb $prefix/private/secrets.tdb");
 730         chmod 0600, "$prefix/private/secrets.tdb";
 731
 732 #Make sure there's no old ntdb file.
 733         system("rm -f $prefix/private/secrets.ntdb");
 734
 735 #This uses a pre-calculated krb5 credentials cache, obtained by running Samba4 with:
 736 # "--option=kdc:service ticket lifetime=239232" "--option=kdc:user ticket lifetime=239232" "--option=kdc:renewal lifetime=239232"
 737 #
 738 #and having in krb5.conf:
 739 # ticket_lifetime = 799718400
 740 # renew_lifetime = 799718400
 741 #
 742 # The commands for the -2 keytab where were:
 743 # kinit administrator@KTEST.SAMBA.EXAMPLE.COM
 744 # kvno host/localktest6@KTEST.SAMBA.EXAMPLE.COM
 745 # kvno cifs/localktest6@KTEST.SAMBA.EXAMPLE.COM
 746 # kvno host/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 747 # kvno cifs/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 748 #
 749 # and then for the -3 keytab, I did
 750 #
 751 # net changetrustpw; kdestroy and the same again.
 752 #
 753 # This creates a credential cache with a very long lifetime (2036 at
 754 # at 2011-04), and shows that running 'net changetrustpw' does not
 755 # break existing logins (for the secrets.tdb method at least).
 756 #
 757
 758         $ret->{KRB5_CCACHE}="FILE:$prefix/krb5_ccache";
 759
 760         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-2 $prefix/krb5_ccache-2");
 761         chmod 0600, "$prefix/krb5_ccache-2";
 762
 763         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-3 $prefix/krb5_ccache-3");
 764         chmod 0600, "$prefix/krb5_ccache-3";
 765
 766         # We need world access to this share, as otherwise the domain
 767         # administrator from the AD domain provided by ktest can't
 768         # access the share for tests.
 769         chmod 0777, "$prefix/share";
 770
 771         if (not $self->check_or_start($ret, "yes", "no", "yes")) {
 772                return undef;
 773         }
 774         return $ret;
 775 }
 776
 777 sub setup_maptoguest($$)
 778 {
 779         my ($self, $path) = @_;
 780
 781         print "PROVISIONING maptoguest...";
 782
 783         my $options = "
 784 map to guest = bad user
 785 ";
 786
 787         my $vars = $self->provision($path,
 788                                     "maptoguest",
 789                                     "maptoguestpass",
 790                                     $options);
 791
 792         $vars or return undef;
 793
 794         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 795                return undef;
 796         }
 797
 798         $self->{vars}->{s3maptoguest} = $vars;
 799
 800         return $vars;
 801 }
 802
 803 sub stop_sig_term($$) {
 804         my ($self, $pid) = @_;
 805         kill("USR1", $pid) or kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 806 }
 807
 808 sub stop_sig_kill($$) {
 809         my ($self, $pid) = @_;
 810         kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 811 }
 812
 813 sub write_pid($$$)
 814 {
 815         my ($env_vars, $app, $pid) = @_;
 816
 817         open(PID, ">$env_vars->{PIDDIR}/timelimit.$app.pid");
 818         print PID $pid;
 819         close(PID);
 820 }
 821
 822 sub read_pid($$)
 823 {
 824         my ($env_vars, $app) = @_;
 825
 826         open(PID, "<$env_vars->{PIDDIR}/timelimit.$app.pid");
 827         my $pid = <PID>;
 828         close(PID);
 829         return $pid;
 830 }
 831
 832 sub check_or_start($$$$$) {
 833         my ($self, $env_vars, $nmbd, $winbindd, $smbd) = @_;
 834
 835         # use a pipe for stdin in the child processes. This allows
 836         # those processes to monitor the pipe for EOF to ensure they
 837         # exit when the test script exits
 838         pipe(STDIN_READER, $env_vars->{STDIN_PIPE});
 839
 840         unlink($env_vars->{NMBD_TEST_LOG});
 841         print "STARTING NMBD...";
 842         my $pid = fork();
 843         if ($pid == 0) {
 844                 open STDOUT, ">$env_vars->{NMBD_TEST_LOG}";
 845                 open STDERR, '>&STDOUT';
 846
 847                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 848
 849                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 850                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 851                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 852
 853                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 854                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 855                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 856                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 857                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 858                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 859
 860                 $ENV{ENVNAME} = "$ENV{ENVNAME}.nmbd";
 861
 862                 if ($nmbd ne "yes") {
 863                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 864                                 my $signame = shift;
 865                                 print("Skip nmbd received signal $signame");
 866                                 exit 0;
 867                         };
 868                         sleep($self->{server_maxtime});
 869                         exit 0;
 870                 }
 871
 872                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
 873                 my @optargs = ("-d0");
 874                 if (defined($ENV{NMBD_OPTIONS})) {
 875                         @optargs = split(/ /, $ENV{NMBD_OPTIONS});
 876                 }
 877                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 878                 if(defined($ENV{NMBD_VALGRIND})) {
 879                         @preargs = split(/ /, $ENV{NMBD_VALGRIND});
 880                 }
 881                 my @args = ("-F", "--no-process-group",
 882                             "-s", $env_vars->{SERVERCONFFILE},
 883                             "-l", $env_vars->{LOGDIR});
 884                 if (not defined($ENV{NMBD_DONT_LOG_STDOUT})) {
 885                         push(@args, "--log-stdout");
 886                 }
 887
 888                 close($env_vars->{STDIN_PIPE});
 889                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 890
 891                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
 892                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
 893         }
 894         $env_vars->{NMBD_TL_PID} = $pid;
 895         write_pid($env_vars, "nmbd", $pid);
 896         print "DONE\n";
 897
 898         unlink($env_vars->{WINBINDD_TEST_LOG});
 899         print "STARTING WINBINDD...";
 900         $pid = fork();
 901         if ($pid == 0) {
 902                 open STDOUT, ">$env_vars->{WINBINDD_TEST_LOG}";
 903                 open STDERR, '>&STDOUT';
 904
 905                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 906
 907                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 908                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 909                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 910
 911                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 912                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 913                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 914                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 915                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 916                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 917                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
 918                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
 919                 } else {
 920                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
 921                 }
 922
 923                 $ENV{ENVNAME} = "$ENV{ENVNAME}.winbindd";
 924
 925                 if ($winbindd ne "yes") {
 926                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 927                                 my $signame = shift;
 928                                 print("Skip winbindd received signal $signame");
 929                                 exit 0;
 930                         };
 931                         sleep($self->{server_maxtime});
 932                         exit 0;
 933                 }
 934
 935                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
 936                 my @optargs = ("-d0");
 937                 if (defined($ENV{WINBINDD_OPTIONS})) {
 938                         @optargs = split(/ /, $ENV{WINBINDD_OPTIONS});
 939                 }
 940                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 941                 if(defined($ENV{WINBINDD_VALGRIND})) {
 942                         @preargs = split(/ /, $ENV{WINBINDD_VALGRIND});
 943                 }
 944                 my @args = ("-F", "--no-process-group",
 945                             "-s", $env_vars->{SERVERCONFFILE},
 946                             "-l", $env_vars->{LOGDIR});
 947                 if (not defined($ENV{WINBINDD_DONT_LOG_STDOUT})) {
 948                         push(@args, "--stdout");
 949                 }
 950
 951                 close($env_vars->{STDIN_PIPE});
 952                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 953
 954                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
 955                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
 956         }
 957         $env_vars->{WINBINDD_TL_PID} = $pid;
 958         write_pid($env_vars, "winbindd", $pid);
 959         print "DONE\n";
 960
 961         unlink($env_vars->{SMBD_TEST_LOG});
 962         print "STARTING SMBD...";
 963         $pid = fork();
 964         if ($pid == 0) {
 965                 open STDOUT, ">$env_vars->{SMBD_TEST_LOG}";
 966                 open STDERR, '>&STDOUT';
 967
 968                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 969
 970                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 971                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 972                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 973
 974                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 975                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 976                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 977                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 978                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 979                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 980                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
 981                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
 982                 } else {
 983                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
 984                 }
 985
 986                 $ENV{ENVNAME} = "$ENV{ENVNAME}.smbd";
 987
 988                 if ($smbd ne "yes") {
 989                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 990                                 my $signame = shift;
 991                                 print("Skip smbd received signal $signame");
 992                                 exit 0;
 993                         };
 994                         sleep($self->{server_maxtime});
 995                         exit 0;
 996                 }
 997
 998                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "smbd");
 999                 my @optargs = ("-d0");
1000                 if (defined($ENV{SMBD_OPTIONS})) {
1001                         @optargs = split(/ /, $ENV{SMBD_OPTIONS});
1002                 }
1003                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
1004                 if(defined($ENV{SMBD_VALGRIND})) {
1005                         @preargs = split(/ /,$ENV{SMBD_VALGRIND});
1006                 }
1007                 my @args = ("-F", "--no-process-group",
1008                             "-s", $env_vars->{SERVERCONFFILE},
1009                             "-l", $env_vars->{LOGDIR});
1010                 if (not defined($ENV{SMBD_DONT_LOG_STDOUT})) {
1011                         push(@args, "--log-stdout");
1012                 }
1013
1014                 close($env_vars->{STDIN_PIPE});
1015                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1016
1017                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1018                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1019         }
1020         $env_vars->{SMBD_TL_PID} = $pid;
1021         write_pid($env_vars, "smbd", $pid);
1022         print "DONE\n";
1023
1024         close(STDIN_READER);
1025
1026         return $self->wait_for_start($env_vars, $nmbd, $winbindd, $smbd);
1027 }
1028
1029 sub provision($$$$$$$$)
1030 {
1031         my ($self, $prefix, $server, $password, $extra_options, $dc_server_ip, $dc_server_ipv6, $no_delete_prefix) = @_;
1032
1033         ##
1034         ## setup the various environment variables we need
1035         ##
1036
1037         my $swiface = Samba::get_interface($server);
1038         my %ret = ();
1039         my $server_ip = "127.0.0.$swiface";
1040         my $server_ipv6 = sprintf("fd00:0000:0000:0000:0000:0000:5357:5f%02x", $swiface);
1041         my $domain = "SAMBA-TEST";
1042
1043         my $unix_name = ($ENV{USER} or $ENV{LOGNAME} or `PATH=/usr/ucb:$ENV{PATH} whoami`);
1044         chomp $unix_name;
1045         my $unix_uid = $>;
1046         my $unix_gids_str = $);
1047         my @unix_gids = split(" ", $unix_gids_str);
1048
1049         my $prefix_abs = abs_path($prefix);
1050         my $bindir_abs = abs_path($self->{bindir});
1051
1052         my @dirs = ();
1053
1054         my $shrdir="$prefix_abs/share";
1055         push(@dirs,$shrdir);
1056
1057         my $libdir="$prefix_abs/lib";
1058         push(@dirs,$libdir);
1059
1060         my $piddir="$prefix_abs/pid";
1061         push(@dirs,$piddir);
1062
1063         my $privatedir="$prefix_abs/private";
1064         push(@dirs,$privatedir);
1065
1066         my $lockdir="$prefix_abs/lockdir";
1067         push(@dirs,$lockdir);
1068
1069         my $eventlogdir="$prefix_abs/lockdir/eventlog";
1070         push(@dirs,$eventlogdir);
1071
1072         my $logdir="$prefix_abs/logs";
1073         push(@dirs,$logdir);
1074
1075         my $driver32dir="$shrdir/W32X86";
1076         push(@dirs,$driver32dir);
1077
1078         my $driver64dir="$shrdir/x64";
1079         push(@dirs,$driver64dir);
1080
1081         my $driver40dir="$shrdir/WIN40";
1082         push(@dirs,$driver40dir);
1083
1084         my $ro_shrdir="$shrdir/root-tmp";
1085         push(@dirs,$ro_shrdir);
1086
1087         my $msdfs_shrdir="$shrdir/msdfsshare";
1088         push(@dirs,$msdfs_shrdir);
1089
1090         my $msdfs_deeppath="$msdfs_shrdir/deeppath";
1091         push(@dirs,$msdfs_deeppath);
1092
1093         my $badnames_shrdir="$shrdir/badnames";
1094         push(@dirs,$badnames_shrdir);
1095
1096         my $lease1_shrdir="$shrdir/SMB2_10";
1097         push(@dirs,$lease1_shrdir);
1098
1099         my $lease2_shrdir="$shrdir/SMB3_00";
1100         push(@dirs,$lease2_shrdir);
1101
1102         my $manglenames_shrdir="$shrdir/manglenames";
1103         push(@dirs,$manglenames_shrdir);
1104
1105         # this gets autocreated by winbindd
1106         my $wbsockdir="$prefix_abs/winbindd";
1107         my $wbsockprivdir="$lockdir/winbindd_privileged";
1108
1109         my $nmbdsockdir="$prefix_abs/nmbd";
1110         unlink($nmbdsockdir);
1111
1112         ##
1113         ## create the test directory layout
1114         ##
1115         die ("prefix_abs = ''") if $prefix_abs eq "";
1116         die ("prefix_abs = '/'") if $prefix_abs eq "/";
1117
1118         mkdir($prefix_abs, 0777);
1119         print "CREATE TEST ENVIRONMENT IN '$prefix'...";
1120         if (not defined($no_delete_prefix) or not $no_delete_prefix) {
1121             system("rm -rf $prefix_abs/*");
1122         }
1123         mkdir($_, 0777) foreach(@dirs);
1124
1125         my $fs_specific_conf = $self->get_fs_specific_conf($shrdir);
1126
1127         ##
1128         ## lockdir and piddir must be 0755
1129         ##
1130         chmod 0755, $lockdir;
1131         chmod 0755, $piddir;
1132
1133
1134         ##
1135         ## create ro and msdfs share layout
1136         ##
1137
1138         chmod 0755, $ro_shrdir;
1139         my $unreadable_file = "$ro_shrdir/unreadable_file";
1140         unless (open(UNREADABLE_FILE, ">$unreadable_file")) {
1141                 warn("Unable to open $unreadable_file");
1142                 return undef;
1143         }
1144         close(UNREADABLE_FILE);
1145         chmod 0600, $unreadable_file;
1146
1147         my $msdfs_target = "$ro_shrdir/msdfs-target";
1148         unless (open(MSDFS_TARGET, ">$msdfs_target")) {
1149                 warn("Unable to open $msdfs_target");
1150                 return undef;
1151         }
1152         close(MSDFS_TARGET);
1153         chmod 0666, $msdfs_target;
1154         symlink "msdfs:$server_ip\\ro-tmp,$server_ipv6\\ro-tmp",
1155                 "$msdfs_shrdir/msdfs-src1";
1156         symlink "msdfs:$server_ipv6\\ro-tmp", "$msdfs_shrdir/deeppath/msdfs-src2";
1157
1158         ##
1159         ## create bad names in $badnames_shrdir
1160         ##
1161         ## (An invalid name, would be mangled to 8.3).
1162         my $badname_target = "$badnames_shrdir/\340|\231\216\377\177";
1163         unless (open(BADNAME_TARGET, ">$badname_target")) {
1164                 warn("Unable to open $badname_target");
1165                 return undef;
1166         }
1167         close(BADNAME_TARGET);
1168         chmod 0666, $badname_target;
1169
1170         ## (A bad name, would not be mangled to 8.3).
1171         my $badname_target = "$badnames_shrdir/\240\276\346\327\377\177";
1172         unless (open(BADNAME_TARGET, ">$badname_target")) {
1173                 warn("Unable to open $badname_target");
1174                 return undef;
1175         }
1176         close(BADNAME_TARGET);
1177         chmod 0666, $badname_target;
1178
1179         ## (A bad good name).
1180         my $badname_target = "$badnames_shrdir/blank.txt";
1181         unless (open(BADNAME_TARGET, ">$badname_target")) {
1182                 warn("Unable to open $badname_target");
1183                 return undef;
1184         }
1185         close(BADNAME_TARGET);
1186         chmod 0666, $badname_target;
1187
1188         ##
1189         ## create mangleable directory names in $manglenames_shrdir
1190         ##
1191         my $manglename_target = "$manglenames_shrdir/foo:bar";
1192         mkdir($manglename_target, 0777);
1193
1194         my $conffile="$libdir/server.conf";
1195
1196         my $nss_wrapper_pl = "$ENV{PERL} $self->{srcdir}/lib/nss_wrapper/nss_wrapper.pl";
1197         my $nss_wrapper_passwd = "$privatedir/passwd";
1198         my $nss_wrapper_group = "$privatedir/group";
1199         my $nss_wrapper_hosts = "$ENV{SELFTEST_PREFIX}/hosts";
1200         my $resolv_conf = "$privatedir/resolv.conf";
1201         my $dns_host_file = "$ENV{SELFTEST_PREFIX}/dns_host_file";
1202
1203         my $mod_printer_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/printing/modprinter.pl";
1204
1205         my $fake_snap_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/fake_snap.pl";
1206
1207         my @eventlog_list = ("dns server", "application");
1208
1209         ##
1210         ## calculate uids and gids
1211         ##
1212
1213         my ($max_uid, $max_gid);
1214         my ($uid_nobody, $uid_root, $uid_pdbtest, $uid_pdbtest2, $uid_userdup);
1215         my ($gid_nobody, $gid_nogroup, $gid_root, $gid_domusers, $gid_domadmins);
1216         my ($gid_userdup);
1217
1218         if ($unix_uid < 0xffff - 5) {
1219                 $max_uid = 0xffff;
1220         } else {
1221                 $max_uid = $unix_uid;
1222         }
1223
1224         $uid_root = $max_uid - 1;
1225         $uid_nobody = $max_uid - 2;
1226         $uid_pdbtest = $max_uid - 3;
1227         $uid_pdbtest2 = $max_uid - 4;
1228         $uid_userdup = $max_uid - 5;
1229
1230         if ($unix_gids[0] < 0xffff - 6) {
1231                 $max_gid = 0xffff;
1232         } else {
1233                 $max_gid = $unix_gids[0];
1234         }
1235
1236         $gid_nobody = $max_gid - 1;
1237         $gid_nogroup = $max_gid - 2;
1238         $gid_root = $max_gid - 3;
1239         $gid_domusers = $max_gid - 4;
1240         $gid_domadmins = $max_gid - 5;
1241         $gid_userdup = $max_gid - 6;
1242
1243         ##
1244         ## create conffile
1245         ##
1246
1247         unless (open(CONF, ">$conffile")) {
1248                 warn("Unable to open $conffile");
1249                 return undef;
1250         }
1251         print CONF "
1252 [global]
1253         netbios name = $server
1254         interfaces = $server_ip/8 $server_ipv6/64
1255         bind interfaces only = yes
1256         panic action = cd $self->{srcdir} && $self->{srcdir}/selftest/gdb_backtrace %d %\$(MAKE_TEST_BINARY)
1257         smbd:suicide mode = yes
1258
1259         workgroup = $domain
1260
1261         private dir = $privatedir
1262         pid directory = $piddir
1263         lock directory = $lockdir
1264         log file = $logdir/log.\%m
1265         log level = 1
1266         debug pid = yes
1267         max log size = 0
1268
1269         state directory = $lockdir
1270         cache directory = $lockdir
1271
1272         passdb backend = tdbsam
1273
1274         time server = yes
1275
1276         add user script =               $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1277         add group script =              $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action add --name %g
1278         add machine script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1279         add user to group script =      $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action add --member %u --name %g --group_path $nss_wrapper_group
1280         delete user script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action delete --name %u
1281         delete group script =           $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action delete --name %g
1282         delete user from group script = $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action delete --member %u --name %g --group_path $nss_wrapper_group
1283
1284         addprinter command =            $mod_printer_pl -a -s $conffile --
1285         deleteprinter command =         $mod_printer_pl -d -s $conffile --
1286
1287         eventlog list = application \"dns server\"
1288
1289         kernel oplocks = no
1290         kernel change notify = no
1291         smb2 leases = yes
1292
1293         logging = file
1294         printing = bsd
1295         printcap name = /dev/null
1296
1297         winbindd socket directory = $wbsockdir
1298         nmbd:socket dir = $nmbdsockdir
1299         idmap config * : range = 100000-200000
1300         winbind enum users = yes
1301         winbind enum groups = yes
1302         winbind separator = /
1303
1304 #       min receivefile size = 4000
1305
1306         read only = no
1307         server signing = auto
1308
1309         smbd:sharedelay = 100000
1310         smbd:writetimeupdatedelay = 500000
1311         map hidden = no
1312         map system = no
1313         map readonly = no
1314         store dos attributes = yes
1315         create mask = 755
1316         dos filemode = yes
1317         strict rename = yes
1318         vfs objects = acl_xattr fake_acls xattr_tdb streams_depot
1319
1320         printing = vlp
1321         print command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb print %p %s
1322         lpq command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpq %p
1323         lp rm command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lprm %p %j
1324         lp pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lppause %p %j
1325         lp resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpresume %p %j
1326         queue pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queuepause %p
1327         queue resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queueresume %p
1328         lpq cache time = 0
1329         print notify backchannel = yes
1330
1331         ncalrpc dir = $prefix_abs/ncalrpc
1332
1333         # The samba3.blackbox.smbclient_s3 test uses this to test that
1334         # sending messages works, and that the %m sub works.
1335         message command = mv %s $shrdir/message.%m
1336
1337         # fsrvp server requires registry shares
1338         registry shares = yes
1339
1340         # Used by RPC SRVSVC tests
1341         add share command = $bindir_abs/smbaddshare
1342         change share command = $bindir_abs/smbchangeshare
1343         delete share command = $bindir_abs/smbdeleteshare
1344
1345         # fruit:copyfile is a global option
1346         fruit:copyfile = yes
1347
1348         # Begin extra options
1349         $extra_options
1350         # End extra options
1351
1352         #Include user defined custom parameters if set
1353 ";
1354
1355         if (defined($ENV{INCLUDE_CUSTOM_CONF})) {
1356                 print CONF "\t$ENV{INCLUDE_CUSTOM_CONF}\n";
1357         }
1358
1359         print CONF "
1360 [tmp]
1361         path = $shrdir
1362         comment = smb username is [%U]
1363 [tmpsort]
1364         path = $shrdir
1365         comment = Load dirsort module
1366         vfs objects = dirsort acl_xattr fake_acls xattr_tdb streams_depot
1367 [tmpenc]
1368         path = $shrdir
1369         comment = encrypt smb username is [%U]
1370         smb encrypt = required
1371         vfs objects = dirsort
1372 [tmpguest]
1373         path = $shrdir
1374         guest ok = yes
1375 [guestonly]
1376         path = $shrdir
1377         guest only = yes
1378         guest ok = yes
1379 [forceuser]
1380         path = $shrdir
1381         force user = $unix_name
1382         guest ok = yes
1383 [forceuser_unixonly]
1384         path = $shrdir
1385         force user = pdbtest
1386         guest ok = yes
1387 [forcegroup]
1388         path = $shrdir
1389         force group = nogroup
1390         guest ok = yes
1391 [ro-tmp]
1392         path = $ro_shrdir
1393         guest ok = yes
1394 [write-list-tmp]
1395         path = $shrdir
1396         read only = yes
1397         write list = $unix_name
1398 [valid-users-tmp]
1399         path = $shrdir
1400         valid users = $unix_name
1401 [msdfs-share]
1402         path = $msdfs_shrdir
1403         msdfs root = yes
1404         msdfs shuffle referrals = yes
1405         guest ok = yes
1406 [hideunread]
1407         copy = tmp
1408         hide unreadable = yes
1409 [tmpcase]
1410         copy = tmp
1411         case sensitive = yes
1412 [hideunwrite]
1413         copy = tmp
1414         hide unwriteable files = yes
1415 [durable]
1416         copy = tmp
1417         kernel share modes = no
1418         kernel oplocks = no
1419         posix locking = no
1420 [fs_specific]
1421         copy = tmp
1422         $fs_specific_conf
1423 [print1]
1424         copy = tmp
1425         printable = yes
1426
1427 [print2]
1428         copy = print1
1429 [print3]
1430         copy = print1
1431         default devmode = no
1432 [lp]
1433         copy = print1
1434
1435 [nfs4acl_simple]
1436         path = $shrdir
1437         comment = smb username is [%U]
1438         nfs4:mode = simple
1439         vfs objects = nfs4acl_xattr xattr_tdb
1440
1441 [nfs4acl_special]
1442         path = $shrdir
1443         comment = smb username is [%U]
1444         nfs4:mode = special
1445         vfs objects = nfs4acl_xattr xattr_tdb
1446
1447 [xcopy_share]
1448         path = $shrdir
1449         comment = smb username is [%U]
1450         create mask = 777
1451         force create mode = 777
1452 [posix_share]
1453         path = $shrdir
1454         comment = smb username is [%U]
1455         create mask = 0777
1456         force create mode = 0
1457         directory mask = 0777
1458         force directory mode = 0
1459         vfs objects = xattr_tdb
1460 [aio]
1461         copy = tmp
1462         aio read size = 1
1463         aio write size = 1
1464
1465 [print\$]
1466         copy = tmp
1467
1468 [vfs_fruit]
1469         path = $shrdir
1470         vfs objects = catia fruit streams_xattr acl_xattr
1471         ea support = yes
1472         fruit:ressource = file
1473         fruit:metadata = netatalk
1474         fruit:locking = netatalk
1475         fruit:encoding = native
1476
1477 [badname-tmp]
1478         path = $badnames_shrdir
1479         guest ok = yes
1480
1481 [manglenames_share]
1482         path = $manglenames_shrdir
1483         guest ok = yes
1484
1485 [dynamic_share]
1486         path = $shrdir/%R
1487         guest ok = yes
1488
1489 [fsrvp_share]
1490         path = $shrdir
1491         comment = fake shapshots using rsync
1492         vfs objects = shell_snap shadow_copy2
1493         shell_snap:check path command = $fake_snap_pl --check
1494         shell_snap:create command = $fake_snap_pl --create
1495         shell_snap:delete command = $fake_snap_pl --delete
1496         # a relative path here fails, the snapshot dir is no longer found
1497         shadow:snapdir = $shrdir/.snapshots
1498         ";
1499         close(CONF);
1500
1501         ##
1502         ## create a test account
1503         ##
1504
1505         unless (open(PASSWD, ">$nss_wrapper_passwd")) {
1506            warn("Unable to open $nss_wrapper_passwd");
1507            return undef;
1508         }
1509         print PASSWD "nobody:x:$uid_nobody:$gid_nobody:nobody gecos:$prefix_abs:/bin/false
1510 $unix_name:x:$unix_uid:$unix_gids[0]:$unix_name gecos:$prefix_abs:/bin/false
1511 pdbtest:x:$uid_pdbtest:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
1512 pdbtest2:x:$uid_pdbtest2:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
1513 userdup:x:$uid_userdup:$gid_userdup:userdup gecos:$prefix_abs:/bin/false
1514 ";
1515         if ($unix_uid != 0) {
1516                 print PASSWD "root:x:$uid_root:$gid_root:root gecos:$prefix_abs:/bin/false
1517 ";
1518         }
1519         close(PASSWD);
1520
1521         unless (open(GROUP, ">$nss_wrapper_group")) {
1522              warn("Unable to open $nss_wrapper_group");
1523              return undef;
1524         }
1525         print GROUP "nobody:x:$gid_nobody:
1526 nogroup:x:$gid_nogroup:nobody
1527 $unix_name-group:x:$unix_gids[0]:
1528 domusers:X:$gid_domusers:
1529 domadmins:X:$gid_domadmins:
1530 userdup:x:$gid_userdup:$unix_name
1531 ";
1532         if ($unix_gids[0] != 0) {
1533                 print GROUP "root:x:$gid_root:
1534 ";
1535         }
1536
1537         close(GROUP);
1538
1539         ## hosts
1540         my $hostname = lc($server);
1541         unless (open(HOSTS, ">>$nss_wrapper_hosts")) {
1542                 warn("Unable to open $nss_wrapper_hosts");
1543                 return undef;
1544         }
1545         print HOSTS "${server_ip} ${hostname}.samba.example.com ${hostname}\n";
1546         print HOSTS "${server_ipv6} ${hostname}.samba.example.com ${hostname}\n";
1547         close(HOSTS);
1548
1549         ## hosts
1550         unless (open(RESOLV_CONF, ">$resolv_conf")) {
1551                 warn("Unable to open $resolv_conf");
1552                 return undef;
1553         }
1554         if (defined($dc_server_ip) or defined($dc_server_ipv6)) {
1555                 if (defined($dc_server_ip)) {
1556                         print RESOLV_CONF "nameserver $dc_server_ip\n";
1557                 }
1558                 if (defined($dc_server_ipv6)) {
1559                         print RESOLV_CONF "nameserver $dc_server_ipv6\n";
1560                 }
1561         } else {
1562                 print RESOLV_CONF "nameserver ${server_ip}\n";
1563                 print RESOLV_CONF "nameserver ${server_ipv6}\n";
1564         }
1565         close(RESOLV_CONF);
1566
1567         foreach my $evlog (@eventlog_list) {
1568                 my $evlogtdb = "$eventlogdir/$evlog.tdb";
1569                 open(EVENTLOG, ">$evlogtdb") or die("Unable to open $evlogtdb");
1570                 close(EVENTLOG);
1571         }
1572
1573         $ENV{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1574         $ENV{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1575         $ENV{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
1576         $ENV{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
1577         if ($ENV{SAMBA_DNS_FAKING}) {
1578                 $ENV{RESOLV_WRAPPER_CONF} = $resolv_conf;
1579         } else {
1580                 $ENV{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
1581         }
1582
1583         my $cmd = "UID_WRAPPER_ROOT=1 " . Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $unix_name > /dev/null";
1584         unless (open(PWD, "|$cmd")) {
1585              warn("Unable to set password for test account\n$cmd");
1586              return undef;
1587         }
1588         print PWD "$password\n$password\n";
1589         unless (close(PWD)) {
1590              warn("Unable to set password for test account\n$cmd");
1591              return undef;
1592         }
1593         print "DONE\n";
1594
1595         open(DNS_UPDATE_LIST, ">$prefix/dns_update_list") or die("Unable to open $$prefix/dns_update_list");
1596         print DNS_UPDATE_LIST "A $server. $server_ip\n";
1597         print DNS_UPDATE_LIST "AAAA $server. $server_ipv6\n";
1598         close(DNS_UPDATE_LIST);
1599
1600         $ret{SERVER_IP} = $server_ip;
1601         $ret{SERVER_IPV6} = $server_ipv6;
1602         $ret{NMBD_TEST_LOG} = "$prefix/nmbd_test.log";
1603         $ret{NMBD_TEST_LOG_POS} = 0;
1604         $ret{WINBINDD_TEST_LOG} = "$prefix/winbindd_test.log";
1605         $ret{WINBINDD_TEST_LOG_POS} = 0;
1606         $ret{SMBD_TEST_LOG} = "$prefix/smbd_test.log";
1607         $ret{SMBD_TEST_LOG_POS} = 0;
1608         $ret{SERVERCONFFILE} = $conffile;
1609         $ret{CONFIGURATION} ="-s $conffile";
1610         $ret{SERVER} = $server;
1611         $ret{USERNAME} = $unix_name;
1612         $ret{USERID} = $unix_uid;
1613         $ret{DOMAIN} = $domain;
1614         $ret{NETBIOSNAME} = $server;
1615         $ret{PASSWORD} = $password;
1616         $ret{PIDDIR} = $piddir;
1617         $ret{SELFTEST_WINBINDD_SOCKET_DIR} = $wbsockdir;
1618         $ret{WINBINDD_PRIV_PIPE_DIR} = $wbsockprivdir;
1619         $ret{NMBD_SOCKET_DIR} = $nmbdsockdir;
1620         $ret{SOCKET_WRAPPER_DEFAULT_IFACE} = $swiface;
1621         $ret{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1622         $ret{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1623         $ret{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
1624         $ret{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
1625         $ret{NSS_WRAPPER_MODULE_SO_PATH} = Samba::nss_wrapper_winbind_so_path($self);
1626         $ret{NSS_WRAPPER_MODULE_FN_PREFIX} = "winbind";
1627         if ($ENV{SAMBA_DNS_FAKING}) {
1628                 $ret{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
1629         } else {
1630                 $ret{RESOLV_WRAPPER_CONF} = $resolv_conf;
1631         }
1632         $ret{LOCAL_PATH} = "$shrdir";
1633         $ret{LOGDIR} = $logdir;
1634
1635         return \%ret;
1636 }
1637
1638 sub wait_for_start($$$$$)
1639 {
1640         my ($self, $envvars, $nmbd, $winbindd, $smbd) = @_;
1641         my $ret;
1642
1643         if ($nmbd eq "yes") {
1644                 my $count = 0;
1645
1646                 # give time for nbt server to register its names
1647                 print "checking for nmbd\n";
1648
1649                 # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
1650                 my $nmblookup = Samba::bindir_path($self, "nmblookup");
1651
1652                 do {
1653                         $ret = system("$nmblookup $envvars->{CONFIGURATION} $envvars->{SERVER}");
1654                         if ($ret != 0) {
1655                                 sleep(1);
1656                         } else {
1657                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
1658                                 system("$nmblookup $envvars->{CONFIGURATION} __SAMBA__");
1659                                 system("$nmblookup $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
1660                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
1661                         }
1662                         $count++;
1663                 } while ($ret != 0 && $count < 10);
1664                 if ($count == 10) {
1665                         print "NMBD not reachable after 10 retries\n";
1666                         teardown_env($self, $envvars);
1667                         return 0;
1668                 }
1669         }
1670
1671         if ($winbindd eq "yes") {
1672             print "checking for winbindd\n";
1673             my $count = 0;
1674             do {
1675                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --ping-dc");
1676                 if ($ret != 0) {
1677                     sleep(2);
1678                 }
1679                 $count++;
1680             } while ($ret != 0 && $count < 10);
1681             if ($count == 10) {
1682                 print "WINBINDD not reachable after 20 seconds\n";
1683                 teardown_env($self, $envvars);
1684                 return 0;
1685             }
1686         }
1687
1688         if ($smbd eq "yes") {
1689             # make sure smbd is also up set
1690             print "wait for smbd\n";
1691
1692             my $count = 0;
1693             do {
1694                 $ret = system(Samba::bindir_path($self, "smbclient") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
1695                 if ($ret != 0) {
1696                     sleep(2);
1697                 }
1698                 $count++
1699             } while ($ret != 0 && $count < 10);
1700             if ($count == 10) {
1701                 print "SMBD failed to start up in a reasonable time (20sec)\n";
1702                 teardown_env($self, $envvars);
1703                 return 0;
1704             }
1705         }
1706
1707         # Ensure we have domain users mapped.
1708         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=513 unixgroup=domusers type=domain");
1709         if ($ret != 0) {
1710             return 1;
1711         }
1712         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=512 unixgroup=domadmins type=domain");
1713         if ($ret != 0) {
1714             return 1;
1715         }
1716
1717         if ($winbindd eq "yes") {
1718             # note: creating builtin groups requires winbindd for the
1719             # unix id allocator
1720             $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} sam createbuiltingroup Users");
1721             if ($ret != 0) {
1722                 print "Failed to create BUILTIN\\Users group\n";
1723                 return 0;
1724             }
1725             my $count = 0;
1726             do {
1727                 system(Samba::bindir_path($self, "net") . " $envvars->{CONFIGURATION} cache flush");
1728                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --sid-to-gid=S-1-5-32-545");
1729                 if ($ret != 0) {
1730                     sleep(2);
1731                 }
1732                 $count++;
1733             } while ($ret != 0 && $count < 10);
1734             if ($count == 10) {
1735                 print "WINBINDD not reachable after 20 seconds\n";
1736                 teardown_env($self, $envvars);
1737                 return 0;
1738             }
1739         }
1740
1741         print $self->getlog_env($envvars);
1742
1743         return 1;
1744 }
1745
1746 1;