s3:blocking: use dynamic posix lock wait intervals

[Samba.git] / selftest / skip

# This file contains a list of regular expressions matching testsuites that
# should be skipped during "make test".
#
# Possible reasons for adding a testsuite here:
# * Testsuite functionality not implemented on the server side
# * Testsuite crashes during run
# * Testsuite crashes server
# * Testsuite contains "flapping" tests (sometimes success, sometimes failure)
# * Testsuite hangs indefinitely
#
# If a testsuite is partially succeeding, please list the failing bits
# in the selftest/knownfail file rather than disabling the testsuite completely.
# That way those tests that do succeed still get run and we will be notified
# if a known failing test suddenly starts succeeding.
#
# If a testsuite is very slow, please add it to selftest/slow instead.
# This way it will still get run in "make slowtest"
#
# Please add a comment for each testsuite you disable explaining why
# it is being skipped.
^samba3.smbtorture_s3.*.randomipc
^samba3.smbtorture_s3.*.negnowait
^samba3.smbtorture_s3.*.nbench
^samba3.smbtorture_s3.*.errmapextract
^samba3.smbtorture_s3.*.trans2scan
^samba3.smbtorture_s3.*.nttransscan
^samba3.smbtorture_s3.*.deny1
^samba3.smbtorture_s3.*.deny2
^samba3.smbtorture_s3.*.openattr
^samba3.smbtorture_s3.*.casetable
^samba3.smbtorture_s3.*.eatest
^samba3.smbtorture_s3.*.mangle
^samba3.smbtorture_s3.*.utable
^samba3.smbtorture_s3.*.pipe_number
^samba3.smbtorture_s3.LOCAL-DBTRANS #hangs for some reason
^samba3.smbtorture_s3.*.DIR1 #loops on 64 bit linux with ext4
^samba3.smbtorture_s3.plain.LOCK9.*\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
^samba3.smbtorture_s3.plain.OPLOCK2\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
^samba3.smbtorture_s3.plain.STREAMERROR\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
^samba3.smbtorture_s3.plain.DIR1\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
^samba3.smbtorture_s3.plain.DIR-CREATETIME\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
^samba3.smbtorture_s3.plain.DELETE-LN\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
^samba3.smbtorture_s3.plain.POSIX\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
^samba3.smbtorture_s3.plain.UID-REGRESSION-TEST\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
^samba3.smbtorture_s3.plain.SHORTNAME-TEST\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
^samba3.smbtorture_s3.plain.POSIX-APPEND\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
^samba3.smbtorture_s3.plain.POSIX-SYMLINK-ACL\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
^samba3.smbtorture_s3.plain.POSIX-SYMLINK-EA\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
^samba3.smbtorture_s3.plain.POSIX-OFD-LOCK\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
^samba3.smbtorture_s3.plain.POSIX-STREAM-DELETE\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
^samba3.smbtorture_s3.plain.POSIX-MKDIR\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
^samba3.smbtorture_s3.plain.POSIX-ACL-OPLOCK\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
^samba3.smbtorture_s3.plain.POSIX-ACL-SHAREROOT\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
^samba3.smbtorture_s3.plain.POSIX-BLOCKING-LOCK\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
^samba3.smbtorture_s3.plain.WINDOWS-BAD-SYMLINK\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
^samba3.smbtorture_s3.plain.RENAME-ACCESS\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
^samba3.smbtorture_s3.plain.OWNER-RIGHTS\(ad_dc_ntvfs\) # Don't test against the s4 ntvfs server anymore
^samba3.smbtorture_s3.plain.PIDHIGH\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
^samba3.smbtorture_s3.plain.NTTRANS-FSCTL\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
^samba3.smbtorture_s3.plain.SMB2-NEGPROT\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
^samba3.smbtorture_s3.plain.BAD-NBT-SESSION\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
^samba3.smbtorture_s3.plain.SMB2-SESSION-REAUTH\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
^samba3.smbtorture_s3.plain.SMB2-SESSION-RECONNECT\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
^samba3.*base.charset
^samba3.*raw.context
^samba3.*raw.ioctl
^samba3.*raw.qfileinfo
^samba3.*raw.qfsinfo
^samba3.*raw.sfileinfo.base
^samba3.smb2.hold-oplock                # Not a test, but a way to block other clients for a test
^samba3.smb2.hold-sharemode             # Not a test, but a way to block other clients for a test
^samba3.smb2.check-sharemode            # Not a test, but a way to test sharemodes outside of Samba
^samba3.smb2.set-sparse-ioctl           # For manual testing, needs additional parameters.
^samba3.smb2.zero-data-ioctl            # For manual testing, needs additional parameters.
^samba3.smb2.durable-open-disconnect    # Not a test, but a way to create a disconnected durable
^samba3.smb2.scan                       # No tests
^samba3.smb2.oplock.levelii501          # No test yet
^samba3.rpc.samr.passwords.lockout\(ad_dc\) # No point running this version, it just waits 12 times longer the samba4 version of this test, covering the same code
^samba4.base.iometer
^samba4.base.casetable
^samba4.base.nttrans
^samba4.base.scan.maxfid
^samba4.raw.eas
^samba4.raw.hold-oplock                 # Not a test, but a way to block other clients for a test
^samba4.smb2.hold-oplock                # Not a test, but a way to block other clients for a test
^samba4.smb2.hold-sharemode             # Not a test, but a way to block other clients for a test
^samba4.smb2.check-sharemode            # Not a test, but a way to test sharemodes outside of Samba
^samba4.smb2.set-sparse-ioctl           # For manual testing, needs additional parameters.
^samba4.smb2.zero-data-ioctl            # For manual testing, needs additional parameters.
^samba4.raw.ping.pong           # Needs second server to test
^samba4.rpc.samr.accessmask
^samba4.rpc.samr.passwords.*ncacn_np\(ad_dc_ntvfs\) # currently fails, possibly config issue
^samba4.rpc.samr.passwords.*ncacn_np\(ad_dc_slowtests\) # currently fails, possibly config issue
^samba4.rpc.samr.passwords.*s4member       # currently fails, possibly config issue
^samba4.raw.scan.eamax
^samba4.smb2.notify
^samba4.smb2.scan
^samba4.smb2.lease
^samba4.smb2.durable-open
^samba4.smb2.durable-v2-open
^samba4.smb2.dir
^samba4.smb2.session
^samba4.smb2.compound
^samba4.smb2.multichannel
^samba4.smb2.oplock.levelii501          # No test yet
# SMB2 in s4 does not seem to support rename correctly
^samba4.smb2.rename.*\(ad_dc_ntvfs\)$
# some operations don't work over the CIFS NTVFS backend yet (eg. root_fid)
^samba4.ntvfs.cifs.*.base.createx_sharemodes_dir
^samba4.ntvfs.cifs.*.base.charset
^samba4.ntvfs.cifs.*.base.iometer
^samba4.ntvfs.cifs.*.base.casetable
^samba4.ntvfs.cifs.*.base.nttrans
^samba4.ntvfs.cifs.*.base.scan-maxfid
^samba4.ntvfs.cifs.*.base.utable
^samba4.ntvfs.cifs.*.base.smb
^samba4.ntvfs.cifs.*.raw.
^samba4.rpc.samsync
^samba4.rpc.remact                                                      # Not provided by Samba 4
^samba4.rpc.oxidresolve                                         # Not provided by Samba 4
^samba4.rpc.eventlog                                            # Not provided by Samba 4
^samba4.rpc.initshutdown                                        # Not provided by Samba 4
^samba4.rpc.spoolss                                             # Not provided by Samba 4
^samba4.rpc.svcctl                                                      # Not provided by Samba 4
^samba4.rpc.atsvc                                                       # Not provided by Samba 4
^samba4.rpc.frsapi                                                      # Not provided by Samba 4
^samba4.rpc.ntsvcs                                                      # Not provided by Samba 4
^samba4.rpc.dfs                                                         # Not provided by Samba 4
^samba4.rpc.witness                                                     # Not provided by Samba 4
^samba4.rpc.clusapi                                                     # clusapi server support not yet provided
^samba4.rpc.iremotewinspool.*\(ad_dc_default\)$                         # Not provided by Samba 4
^samba4.*.base.samba3.*                                         # Samba3-specific test
^samba4.*.raw.samba3.*                                          # Samba3-specific test
^samba4.rpc..*samba3.*                                          # Samba3-specific test
^samba4.raw.offline                     # Samba 4 doesn't have much offline support yet
^samba4.rpc.countcalls # this is not useful now we have full IDL
^samba4.rap.basic
^samba4.rap.scan # same thing here - we have docs now
^samba4.rap.printing # Not provided by Samba 4
^samba4.rap.rpc
^samba4.rap.sam # Not provided by Samba 4
bench # don't run benchmarks in our selftest
^samba4..*trans2.scan # uses huge number of file descriptors
^samba4.*.base.scan.ioctl # bad idea in make test
^samba4.*.base.scan.pipe_number # bad idea in make test
^samba4.*.base.secleak # no point on build farm
^samba4.*.base.delaywrite # This is randomly failing, depending on timing and filesystem features
^samba4.*.base.winattr
^samba4.*.base.birthtime
^samba4.*base.defer_open
^samba4.smb2.acls # new test which doesn't pass yet
# ktutil might not be installed or from mit...
# we should build a samba4ktutil and use that instead
^samba4.blackbox.ktpass # this test isn't portable ...
^samba4.rpc.unixinfo # This contains a server-side getpwuid call which hangs the server when nss_winbindd is in use
^samba.tests.dcerpc.unix  # This contains a server-side getpwuid call which hangs the server when nss_winbindd is in use