selftest/target/Samba3.pm

   1 #!/usr/bin/perl
   2 # Bootstrap Samba and run a number of tests against it.
   3 # Copyright (C) 2005-2007 Jelmer Vernooij <jelmer@samba.org>
   4 # Published under the GNU GPL, v3 or later.
   5
   6 package Samba3;
   7
   8 use strict;
   9 use Cwd qw(abs_path);
  10 use FindBin qw($RealBin);
  11 use POSIX;
  12 use target::Samba;
  13
  14 sub have_ads($) {
  15         my ($self) = @_;
  16         my $found_ads = 0;
  17         my $smbd_build_options = Samba::bindir_path($self, "smbd") . " -b|";
  18         open(IN, $smbd_build_options) or die("Unable to run $smbd_build_options: $!");
  19
  20         while (<IN>) {
  21                 if (/WITH_ADS/) {
  22                        $found_ads = 1;
  23                 }
  24         }
  25         close IN;
  26
  27         # If we were not built with ADS support, pretend we were never even available
  28         print "smbd does not have ADS support\n" unless $found_ads;
  29         return $found_ads;
  30 }
  31
  32 # return smb.conf parameters applicable to @path, based on the underlying
  33 # filesystem type
  34 sub get_fs_specific_conf($$)
  35 {
  36         my ($self, $path) = @_;
  37         my $mods = "";
  38         my $stat_out = `stat --file-system $path` or return "";
  39
  40         if ($stat_out =~ m/Type:\s+btrfs/) {
  41                 $mods .= "btrfs ";
  42         }
  43
  44         if ($mods) {
  45                 return "vfs objects = $mods";
  46         }
  47
  48         return undef;
  49 }
  50
  51 sub new($$) {
  52         my ($classname, $bindir, $srcdir, $server_maxtime) = @_;
  53         my $self = { vars => {},
  54                      bindir => $bindir,
  55                      srcdir => $srcdir,
  56                      server_maxtime => $server_maxtime
  57         };
  58         bless $self;
  59         return $self;
  60 }
  61
  62 sub teardown_env($$)
  63 {
  64         my ($self, $envvars) = @_;
  65         my $count = 0;
  66
  67         # This should cause smbd to terminate gracefully
  68         close($envvars->{STDIN_PIPE});
  69
  70         my $smbdpid = $envvars->{SMBD_TL_PID};
  71         my $nmbdpid = $envvars->{NMBD_TL_PID};
  72         my $winbinddpid = $envvars->{WINBINDD_TL_PID};
  73
  74         # This should give it time to write out the gcov data
  75         until ($count > 20) {
  76             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  77             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
  78             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
  79             if ($smbdchild == -1
  80                 && $nmbdchild == -1
  81                 && $winbinddchild == -1) {
  82                 last;
  83             }
  84             sleep(1);
  85             $count++;
  86         }
  87
  88         if ($count <= 20 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
  89             return;
  90         }
  91
  92         $self->stop_sig_term($smbdpid);
  93         $self->stop_sig_term($nmbdpid);
  94         $self->stop_sig_term($winbinddpid);
  95
  96         $count = 0;
  97         until ($count > 10) {
  98             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  99             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
 100             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
 101             if ($smbdchild == -1
 102                 && $nmbdchild == -1
 103                 && $winbinddchild == -1) {
 104                 last;
 105             }
 106             sleep(1);
 107             $count++;
 108         }
 109
 110         if ($count <= 10 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
 111             return;
 112         }
 113
 114         warn("timelimit process did not quit on SIGTERM, sending SIGKILL");
 115         $self->stop_sig_kill($smbdpid);
 116         $self->stop_sig_kill($nmbdpid);
 117         $self->stop_sig_kill($winbinddpid);
 118
 119         return 0;
 120 }
 121
 122 sub getlog_env_app($$$)
 123 {
 124         my ($self, $envvars, $name) = @_;
 125
 126         my $title = "$name LOG of: $envvars->{NETBIOSNAME}\n";
 127         my $out = $title;
 128
 129         open(LOG, "<".$envvars->{$name."_TEST_LOG"});
 130
 131         seek(LOG, $envvars->{$name."_TEST_LOG_POS"}, SEEK_SET);
 132         while (<LOG>) {
 133                 $out .= $_;
 134         }
 135         $envvars->{$name."_TEST_LOG_POS"} = tell(LOG);
 136         close(LOG);
 137
 138         return "" if $out eq $title;
 139
 140         return $out;
 141 }
 142
 143 sub getlog_env($$)
 144 {
 145         my ($self, $envvars) = @_;
 146         my $ret = "";
 147
 148         $ret .= $self->getlog_env_app($envvars, "SMBD");
 149         $ret .= $self->getlog_env_app($envvars, "NMBD");
 150         $ret .= $self->getlog_env_app($envvars, "WINBINDD");
 151
 152         return $ret;
 153 }
 154
 155 sub check_env($$)
 156 {
 157         my ($self, $envvars) = @_;
 158
 159         my $childpid = waitpid(-1, WNOHANG);
 160
 161         # TODO ...
 162         return 1;
 163 }
 164
 165 sub setup_env($$$)
 166 {
 167         my ($self, $envname, $path) = @_;
 168
 169         $ENV{ENVNAME} = $envname;
 170
 171         if (defined($self->{vars}->{$envname})) {
 172                 return $self->{vars}->{$envname};
 173         }
 174
 175         if ($envname eq "nt4_dc") {
 176                 return $self->setup_nt4_dc("$path/nt4_dc");
 177         } elsif ($envname eq "nt4_dc_schannel") {
 178                 return $self->setup_nt4_dc_schannel("$path/nt4_dc_schannel");
 179         } elsif ($envname eq "simpleserver") {
 180                 return $self->setup_simpleserver("$path/simpleserver");
 181         } elsif ($envname eq "fileserver") {
 182                 return $self->setup_fileserver("$path/fileserver");
 183         } elsif ($envname eq "maptoguest") {
 184                 return $self->setup_maptoguest("$path/maptoguest");
 185         } elsif ($envname eq "ktest") {
 186                 return $self->setup_ktest("$path/ktest");
 187         } elsif ($envname eq "nt4_member") {
 188                 if (not defined($self->{vars}->{nt4_dc})) {
 189                         if (not defined($self->setup_nt4_dc("$path/nt4_dc"))) {
 190                                 return undef;
 191                         }
 192                 }
 193                 return $self->setup_nt4_member("$path/nt4_member", $self->{vars}->{nt4_dc});
 194         } else {
 195                 return "UNKNOWN";
 196         }
 197 }
 198
 199 sub setup_nt4_dc($$)
 200 {
 201         my ($self, $path) = @_;
 202
 203         print "PROVISIONING NT4 DC...";
 204
 205         my $nt4_dc_options = "
 206         domain master = yes
 207         domain logons = yes
 208         lanman auth = yes
 209
 210         rpc_server:epmapper = external
 211         rpc_server:spoolss = external
 212         rpc_server:lsarpc = external
 213         rpc_server:samr = external
 214         rpc_server:netlogon = external
 215         rpc_server:register_embedded_np = yes
 216         rpc_server:FssagentRpc = external
 217
 218         rpc_daemon:epmd = fork
 219         rpc_daemon:spoolssd = fork
 220         rpc_daemon:lsasd = fork
 221         rpc_daemon:fssd = fork
 222         fss: sequence timeout = 1
 223 ";
 224
 225         my $vars = $self->provision($path,
 226                                     "LOCALNT4DC2",
 227                                     "localntdc2pass",
 228                                     $nt4_dc_options);
 229
 230         $vars or return undef;
 231
 232         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 233                return undef;
 234         }
 235
 236         $vars->{DC_SERVER} = $vars->{SERVER};
 237         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 238         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 239         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 240         $vars->{DC_USERNAME} = $vars->{USERNAME};
 241         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 242
 243         $self->{vars}->{nt4_dc} = $vars;
 244
 245         return $vars;
 246 }
 247
 248 sub setup_nt4_dc_schannel($$)
 249 {
 250         my ($self, $path) = @_;
 251
 252         print "PROVISIONING NT4 DC WITH SERVER SCHANNEL ...";
 253
 254         my $pdc_options = "
 255         domain master = yes
 256         domain logons = yes
 257         lanman auth = yes
 258
 259         rpc_server:epmapper = external
 260         rpc_server:spoolss = external
 261         rpc_server:lsarpc = external
 262         rpc_server:samr = external
 263         rpc_server:netlogon = external
 264         rpc_server:register_embedded_np = yes
 265
 266         rpc_daemon:epmd = fork
 267         rpc_daemon:spoolssd = fork
 268         rpc_daemon:lsasd = fork
 269
 270         server schannel = yes
 271 ";
 272
 273         my $vars = $self->provision($path,
 274                                     "LOCALNT4DC9",
 275                                     "localntdc9pass",
 276                                     $pdc_options);
 277
 278         $vars or return undef;
 279
 280         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 281                return undef;
 282         }
 283
 284         $vars->{DC_SERVER} = $vars->{SERVER};
 285         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 286         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 287         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 288         $vars->{DC_USERNAME} = $vars->{USERNAME};
 289         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 290
 291         $self->{vars}->{nt4_dc_schannel} = $vars;
 292
 293         return $vars;
 294 }
 295
 296 sub setup_nt4_member($$$)
 297 {
 298         my ($self, $prefix, $nt4_dc_vars) = @_;
 299         my $count = 0;
 300         my $rc;
 301
 302         print "PROVISIONING MEMBER...";
 303
 304         my $member_options = "
 305         security = domain
 306         server signing = on
 307         dbwrap_tdb_mutexes:* = yes
 308 ";
 309         my $ret = $self->provision($prefix,
 310                                    "LOCALNT4MEMBER3",
 311                                    "localnt4member3pass",
 312                                    $member_options);
 313
 314         $ret or return undef;
 315
 316         my $nmblookup = Samba::bindir_path($self, "nmblookup");
 317         do {
 318                 print "Waiting for the LOGON SERVER registration ...\n";
 319                 $rc = system("$nmblookup $ret->{CONFIGURATION} $ret->{DOMAIN}\#1c");
 320                 if ($rc != 0) {
 321                         sleep(1);
 322                 }
 323                 $count++;
 324         } while ($rc != 0 && $count < 10);
 325         if ($count == 10) {
 326                 print "NMBD not reachable after 10 retries\n";
 327                 teardown_env($self, $ret);
 328                 return 0;
 329         }
 330
 331         my $net = Samba::bindir_path($self, "net");
 332         my $cmd = "";
 333         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 334         $cmd .= "$net join $ret->{CONFIGURATION} $nt4_dc_vars->{DOMAIN} member";
 335         $cmd .= " -U$nt4_dc_vars->{USERNAME}\%$nt4_dc_vars->{PASSWORD}";
 336
 337         if (system($cmd) != 0) {
 338             warn("Join failed\n$cmd");
 339             return undef;
 340         }
 341
 342         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 343                return undef;
 344         }
 345
 346         $ret->{DC_SERVER} = $nt4_dc_vars->{SERVER};
 347         $ret->{DC_SERVER_IP} = $nt4_dc_vars->{SERVER_IP};
 348         $ret->{DC_SERVER_IPV6} = $nt4_dc_vars->{SERVER_IPV6};
 349         $ret->{DC_NETBIOSNAME} = $nt4_dc_vars->{NETBIOSNAME};
 350         $ret->{DC_USERNAME} = $nt4_dc_vars->{USERNAME};
 351         $ret->{DC_PASSWORD} = $nt4_dc_vars->{PASSWORD};
 352
 353         return $ret;
 354 }
 355
 356 sub setup_admember($$$$)
 357 {
 358         my ($self, $prefix, $dcvars) = @_;
 359
 360         # If we didn't build with ADS, pretend this env was never available
 361         if (not $self->have_ads()) {
 362                 return "UNKNOWN";
 363         }
 364
 365         print "PROVISIONING S3 AD MEMBER...";
 366
 367         my $member_options = "
 368         security = ads
 369         server signing = on
 370         workgroup = $dcvars->{DOMAIN}
 371         realm = $dcvars->{REALM}
 372 ";
 373
 374         my $ret = $self->provision($prefix,
 375                                    "LOCALADMEMBER",
 376                                    "loCalMemberPass",
 377                                    $member_options,
 378                                    $dcvars->{SERVER_IP},
 379                                    $dcvars->{SERVER_IPV6});
 380
 381         $ret or return undef;
 382
 383         close(USERMAP);
 384         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 385         $ret->{REALM} = $dcvars->{REALM};
 386
 387         my $ctx;
 388         my $prefix_abs = abs_path($prefix);
 389         $ctx = {};
 390         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 391         $ctx->{domain} = $dcvars->{DOMAIN};
 392         $ctx->{realm} = $dcvars->{REALM};
 393         $ctx->{dnsname} = lc($dcvars->{REALM});
 394         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 395         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 396         Samba::mk_krb5_conf($ctx, "");
 397
 398         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 399
 400         my $net = Samba::bindir_path($self, "net");
 401         my $cmd = "";
 402         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 403         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 404                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 405         } else {
 406                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 407         }
 408         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 409         $cmd .= "$net join $ret->{CONFIGURATION}";
 410         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 411
 412         if (system($cmd) != 0) {
 413             warn("Join failed\n$cmd");
 414             return undef;
 415         }
 416
 417         # We need world access to this share, as otherwise the domain
 418         # administrator from the AD domain provided by Samba4 can't
 419         # access the share for tests.
 420         chmod 0777, "$prefix/share";
 421
 422         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 423                 return undef;
 424         }
 425
 426         $ret->{DC_SERVER} = $dcvars->{SERVER};
 427         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 428         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 429         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 430         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 431         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 432
 433         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 434         $ret->{target} = $self;
 435
 436         return $ret;
 437 }
 438
 439 sub setup_admember_rfc2307($$$$)
 440 {
 441         my ($self, $prefix, $dcvars) = @_;
 442
 443         # If we didn't build with ADS, pretend this env was never available
 444         if (not $self->have_ads()) {
 445                 return "UNKNOWN";
 446         }
 447
 448         print "PROVISIONING S3 AD MEMBER WITH idmap_rfc2307 config...";
 449
 450         my $member_options = "
 451         security = ads
 452         server signing = on
 453         workgroup = $dcvars->{DOMAIN}
 454         realm = $dcvars->{REALM}
 455         idmap config $dcvars->{DOMAIN} : backend = rfc2307
 456         idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
 457         idmap config $dcvars->{DOMAIN} : ldap_server = ad
 458         idmap config $dcvars->{DOMAIN} : bind_path_user = ou=idmap,dc=samba,dc=example,dc=com
 459         idmap config $dcvars->{DOMAIN} : bind_path_group = ou=idmap,dc=samba,dc=example,dc=com
 460 ";
 461
 462         my $ret = $self->provision($prefix,
 463                                    "RFC2307MEMBER",
 464                                    "loCalMemberPass",
 465                                    $member_options,
 466                                    $dcvars->{SERVER_IP},
 467                                    $dcvars->{SERVER_IPV6});
 468
 469         $ret or return undef;
 470
 471         close(USERMAP);
 472         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 473         $ret->{REALM} = $dcvars->{REALM};
 474
 475         my $ctx;
 476         my $prefix_abs = abs_path($prefix);
 477         $ctx = {};
 478         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 479         $ctx->{domain} = $dcvars->{DOMAIN};
 480         $ctx->{realm} = $dcvars->{REALM};
 481         $ctx->{dnsname} = lc($dcvars->{REALM});
 482         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 483         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 484         Samba::mk_krb5_conf($ctx, "");
 485
 486         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 487
 488         my $net = Samba::bindir_path($self, "net");
 489         my $cmd = "";
 490         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 491         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 492                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 493         } else {
 494                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 495         }
 496         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 497         $cmd .= "$net join $ret->{CONFIGURATION}";
 498         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 499
 500         if (system($cmd) != 0) {
 501             warn("Join failed\n$cmd");
 502             return undef;
 503         }
 504
 505         # We need world access to this share, as otherwise the domain
 506         # administrator from the AD domain provided by Samba4 can't
 507         # access the share for tests.
 508         chmod 0777, "$prefix/share";
 509
 510         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 511                 return undef;
 512         }
 513
 514         $ret->{DC_SERVER} = $dcvars->{SERVER};
 515         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 516         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 517         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 518         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 519         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 520
 521         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 522         $ret->{target} = $self;
 523
 524         return $ret;
 525 }
 526
 527 sub setup_simpleserver($$)
 528 {
 529         my ($self, $path) = @_;
 530
 531         print "PROVISIONING simple server...";
 532
 533         my $prefix_abs = abs_path($path);
 534
 535         my $simpleserver_options = "
 536         lanman auth = yes
 537         vfs objects = xattr_tdb streams_depot
 538
 539 [vfs_aio_fork]
 540         path = $prefix_abs/share
 541         vfs objects = aio_fork
 542         read only = no
 543         vfs_aio_fork:erratic_testing_mode=yes
 544 ";
 545
 546         my $vars = $self->provision($path,
 547                                     "LOCALSHARE4",
 548                                     "local4pass",
 549                                     $simpleserver_options);
 550
 551         $vars or return undef;
 552
 553         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 554                return undef;
 555         }
 556
 557         $self->{vars}->{simpleserver} = $vars;
 558
 559         return $vars;
 560 }
 561
 562 sub setup_fileserver($$)
 563 {
 564         my ($self, $path) = @_;
 565         my $prefix_abs = abs_path($path);
 566         my $srcdir_abs = abs_path($self->{srcdir});
 567
 568         print "PROVISIONING file server ...\n";
 569
 570         my @dirs = ();
 571
 572         mkdir($prefix_abs, 0777);
 573
 574         my $share_dir="$prefix_abs/share";
 575
 576         # Create share directory structure
 577         my $lower_case_share_dir="$share_dir/lower-case";
 578         push(@dirs, $lower_case_share_dir);
 579
 580         my $lower_case_share_dir_30000="$share_dir/lower-case-30000";
 581         push(@dirs, $lower_case_share_dir_30000);
 582
 583         my $dfree_share_dir="$share_dir/dfree";
 584         push(@dirs, $dfree_share_dir);
 585
 586         my $fileserver_options = "
 587 [lowercase]
 588         path = $lower_case_share_dir
 589         comment = smb username is [%U]
 590         case sensitive = True
 591         default case = lower
 592         preserve case = no
 593         short preserve case = no
 594 [lowercase-30000]
 595         path = $lower_case_share_dir_30000
 596         comment = smb username is [%U]
 597         case sensitive = True
 598         default case = lower
 599         preserve case = no
 600         short preserve case = no
 601 [dfree]
 602         path = $dfree_share_dir
 603         comment = smb username is [%U]
 604         dfree command = $srcdir_abs/testprogs/blackbox/dfree.sh
 605         ";
 606
 607         my $vars = $self->provision($path,
 608                                     "FILESERVER",
 609                                     "fileserver_secret",
 610                                     $fileserver_options,
 611                                     undef,
 612                                     undef,
 613                                     1);
 614
 615         $vars or return undef;
 616
 617         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 618                return undef;
 619         }
 620
 621         $self->{vars}->{fileserver} = $vars;
 622
 623         mkdir($_, 0777) foreach(@dirs);
 624
 625         ## Create case sensitive lower case share dir
 626         foreach my $file ('a'..'z') {
 627                 my $full_path = $lower_case_share_dir . '/' . $file;
 628                 open my $fh, '>', $full_path;
 629                 # Add some content to file
 630                 print $fh $full_path;
 631                 close $fh;
 632         }
 633
 634         for (my $file = 1; $file < 51; ++$file) {
 635                 my $full_path = $lower_case_share_dir . '/' . $file;
 636                 open my $fh, '>', $full_path;
 637                 # Add some content to file
 638                 print $fh $full_path;
 639                 close $fh;
 640         }
 641
 642         # Create content for 30000 share
 643         foreach my $file ('a'..'z') {
 644                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
 645                 open my $fh, '>', $full_path;
 646                 # Add some content to file
 647                 print $fh $full_path;
 648                 close $fh;
 649         }
 650
 651         for (my $file = 1; $file < 30001; ++$file) {
 652                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
 653                 open my $fh, '>', $full_path;
 654                 # Add some content to file
 655                 print $fh $full_path;
 656                 close $fh;
 657         }
 658
 659         return $vars;
 660 }
 661
 662 sub setup_ktest($$$)
 663 {
 664         my ($self, $prefix) = @_;
 665
 666         # If we didn't build with ADS, pretend this env was never available
 667         if (not $self->have_ads()) {
 668                 return "UNKNOWN";
 669         }
 670
 671         print "PROVISIONING server with security=ads...";
 672
 673         my $ktest_options = "
 674         workgroup = KTEST
 675         realm = ktest.samba.example.com
 676         security = ads
 677         username map = $prefix/lib/username.map
 678         server signing = required
 679 ";
 680
 681         my $ret = $self->provision($prefix,
 682                                    "LOCALKTEST6",
 683                                    "localktest6pass",
 684                                    $ktest_options);
 685
 686         $ret or return undef;
 687
 688         my $ctx;
 689         my $prefix_abs = abs_path($prefix);
 690         $ctx = {};
 691         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 692         $ctx->{domain} = "KTEST";
 693         $ctx->{realm} = "KTEST.SAMBA.EXAMPLE.COM";
 694         $ctx->{dnsname} = lc($ctx->{realm});
 695         $ctx->{kdc_ipv4} = "0.0.0.0";
 696         $ctx->{kdc_ipv6} = "::";
 697         Samba::mk_krb5_conf($ctx, "");
 698
 699         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 700
 701         open(USERMAP, ">$prefix/lib/username.map") or die("Unable to open $prefix/lib/username.map");
 702         print USERMAP "
 703 $ret->{USERNAME} = KTEST\\Administrator
 704 ";
 705         close(USERMAP);
 706
 707 #This is the secrets.tdb created by 'net ads join' from Samba3 to a
 708 #Samba4 DC with the same parameters as are being used here.  The
 709 #domain SID is S-1-5-21-1071277805-689288055-3486227160
 710
 711         system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb $prefix/private/secrets.tdb");
 712         chmod 0600, "$prefix/private/secrets.tdb";
 713
 714 #Make sure there's no old ntdb file.
 715         system("rm -f $prefix/private/secrets.ntdb");
 716
 717 #This uses a pre-calculated krb5 credentials cache, obtained by running Samba4 with:
 718 # "--option=kdc:service ticket lifetime=239232" "--option=kdc:user ticket lifetime=239232" "--option=kdc:renewal lifetime=239232"
 719 #
 720 #and having in krb5.conf:
 721 # ticket_lifetime = 799718400
 722 # renew_lifetime = 799718400
 723 #
 724 # The commands for the -2 keytab where were:
 725 # kinit administrator@KTEST.SAMBA.EXAMPLE.COM
 726 # kvno host/localktest6@KTEST.SAMBA.EXAMPLE.COM
 727 # kvno cifs/localktest6@KTEST.SAMBA.EXAMPLE.COM
 728 # kvno host/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 729 # kvno cifs/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 730 #
 731 # and then for the -3 keytab, I did
 732 #
 733 # net changetrustpw; kdestroy and the same again.
 734 #
 735 # This creates a credential cache with a very long lifetime (2036 at
 736 # at 2011-04), and shows that running 'net changetrustpw' does not
 737 # break existing logins (for the secrets.tdb method at least).
 738 #
 739
 740         $ret->{KRB5_CCACHE}="FILE:$prefix/krb5_ccache";
 741
 742         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-2 $prefix/krb5_ccache-2");
 743         chmod 0600, "$prefix/krb5_ccache-2";
 744
 745         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-3 $prefix/krb5_ccache-3");
 746         chmod 0600, "$prefix/krb5_ccache-3";
 747
 748         # We need world access to this share, as otherwise the domain
 749         # administrator from the AD domain provided by ktest can't
 750         # access the share for tests.
 751         chmod 0777, "$prefix/share";
 752
 753         if (not $self->check_or_start($ret, "yes", "no", "yes")) {
 754                return undef;
 755         }
 756         return $ret;
 757 }
 758
 759 sub setup_maptoguest($$)
 760 {
 761         my ($self, $path) = @_;
 762
 763         print "PROVISIONING maptoguest...";
 764
 765         my $options = "
 766 map to guest = bad user
 767 ";
 768
 769         my $vars = $self->provision($path,
 770                                     "maptoguest",
 771                                     "maptoguestpass",
 772                                     $options);
 773
 774         $vars or return undef;
 775
 776         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 777                return undef;
 778         }
 779
 780         $self->{vars}->{s3maptoguest} = $vars;
 781
 782         return $vars;
 783 }
 784
 785 sub stop_sig_term($$) {
 786         my ($self, $pid) = @_;
 787         kill("USR1", $pid) or kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 788 }
 789
 790 sub stop_sig_kill($$) {
 791         my ($self, $pid) = @_;
 792         kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 793 }
 794
 795 sub write_pid($$$)
 796 {
 797         my ($env_vars, $app, $pid) = @_;
 798
 799         open(PID, ">$env_vars->{PIDDIR}/timelimit.$app.pid");
 800         print PID $pid;
 801         close(PID);
 802 }
 803
 804 sub read_pid($$)
 805 {
 806         my ($env_vars, $app) = @_;
 807
 808         open(PID, "<$env_vars->{PIDDIR}/timelimit.$app.pid");
 809         my $pid = <PID>;
 810         close(PID);
 811         return $pid;
 812 }
 813
 814 sub check_or_start($$$$$) {
 815         my ($self, $env_vars, $nmbd, $winbindd, $smbd) = @_;
 816
 817         # use a pipe for stdin in the child processes. This allows
 818         # those processes to monitor the pipe for EOF to ensure they
 819         # exit when the test script exits
 820         pipe(STDIN_READER, $env_vars->{STDIN_PIPE});
 821
 822         unlink($env_vars->{NMBD_TEST_LOG});
 823         print "STARTING NMBD...";
 824         my $pid = fork();
 825         if ($pid == 0) {
 826                 open STDOUT, ">$env_vars->{NMBD_TEST_LOG}";
 827                 open STDERR, '>&STDOUT';
 828
 829                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 830
 831                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 832                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 833                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 834
 835                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 836                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 837                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 838                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 839                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 840                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 841
 842                 $ENV{ENVNAME} = "$ENV{ENVNAME}.nmbd";
 843
 844                 if ($nmbd ne "yes") {
 845                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 846                                 my $signame = shift;
 847                                 print("Skip nmbd received signal $signame");
 848                                 exit 0;
 849                         };
 850                         sleep($self->{server_maxtime});
 851                         exit 0;
 852                 }
 853
 854                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
 855                 my @optargs = ("-d0");
 856                 if (defined($ENV{NMBD_OPTIONS})) {
 857                         @optargs = split(/ /, $ENV{NMBD_OPTIONS});
 858                 }
 859                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 860                 if(defined($ENV{NMBD_VALGRIND})) {
 861                         @preargs = split(/ /, $ENV{NMBD_VALGRIND});
 862                 }
 863                 my @args = ("-F", "--no-process-group",
 864                             "-s", $env_vars->{SERVERCONFFILE},
 865                             "-l", $env_vars->{LOGDIR});
 866                 if (not defined($ENV{NMBD_DONT_LOG_STDOUT})) {
 867                         push(@args, "--log-stdout");
 868                 }
 869
 870                 close($env_vars->{STDIN_PIPE});
 871                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 872
 873                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
 874                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
 875         }
 876         $env_vars->{NMBD_TL_PID} = $pid;
 877         write_pid($env_vars, "nmbd", $pid);
 878         print "DONE\n";
 879
 880         unlink($env_vars->{WINBINDD_TEST_LOG});
 881         print "STARTING WINBINDD...";
 882         $pid = fork();
 883         if ($pid == 0) {
 884                 open STDOUT, ">$env_vars->{WINBINDD_TEST_LOG}";
 885                 open STDERR, '>&STDOUT';
 886
 887                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 888
 889                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 890                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 891                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 892
 893                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 894                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 895                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 896                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 897                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 898                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 899                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
 900                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
 901                 } else {
 902                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
 903                 }
 904
 905                 $ENV{ENVNAME} = "$ENV{ENVNAME}.winbindd";
 906
 907                 if ($winbindd ne "yes") {
 908                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 909                                 my $signame = shift;
 910                                 print("Skip winbindd received signal $signame");
 911                                 exit 0;
 912                         };
 913                         sleep($self->{server_maxtime});
 914                         exit 0;
 915                 }
 916
 917                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
 918                 my @optargs = ("-d0");
 919                 if (defined($ENV{WINBINDD_OPTIONS})) {
 920                         @optargs = split(/ /, $ENV{WINBINDD_OPTIONS});
 921                 }
 922                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 923                 if(defined($ENV{WINBINDD_VALGRIND})) {
 924                         @preargs = split(/ /, $ENV{WINBINDD_VALGRIND});
 925                 }
 926                 my @args = ("-F", "--no-process-group",
 927                             "-s", $env_vars->{SERVERCONFFILE},
 928                             "-l", $env_vars->{LOGDIR});
 929                 if (not defined($ENV{WINBINDD_DONT_LOG_STDOUT})) {
 930                         push(@args, "--stdout");
 931                 }
 932
 933                 close($env_vars->{STDIN_PIPE});
 934                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 935
 936                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
 937                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
 938         }
 939         $env_vars->{WINBINDD_TL_PID} = $pid;
 940         write_pid($env_vars, "winbindd", $pid);
 941         print "DONE\n";
 942
 943         unlink($env_vars->{SMBD_TEST_LOG});
 944         print "STARTING SMBD...";
 945         $pid = fork();
 946         if ($pid == 0) {
 947                 open STDOUT, ">$env_vars->{SMBD_TEST_LOG}";
 948                 open STDERR, '>&STDOUT';
 949
 950                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 951
 952                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 953                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 954                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 955
 956                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 957                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 958                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 959                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 960                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 961                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 962                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
 963                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
 964                 } else {
 965                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
 966                 }
 967
 968                 $ENV{ENVNAME} = "$ENV{ENVNAME}.smbd";
 969
 970                 if ($smbd ne "yes") {
 971                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 972                                 my $signame = shift;
 973                                 print("Skip smbd received signal $signame");
 974                                 exit 0;
 975                         };
 976                         sleep($self->{server_maxtime});
 977                         exit 0;
 978                 }
 979
 980                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "smbd");
 981                 my @optargs = ("-d0");
 982                 if (defined($ENV{SMBD_OPTIONS})) {
 983                         @optargs = split(/ /, $ENV{SMBD_OPTIONS});
 984                 }
 985                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 986                 if(defined($ENV{SMBD_VALGRIND})) {
 987                         @preargs = split(/ /,$ENV{SMBD_VALGRIND});
 988                 }
 989                 my @args = ("-F", "--no-process-group",
 990                             "-s", $env_vars->{SERVERCONFFILE},
 991                             "-l", $env_vars->{LOGDIR});
 992                 if (not defined($ENV{SMBD_DONT_LOG_STDOUT})) {
 993                         push(@args, "--log-stdout");
 994                 }
 995
 996                 close($env_vars->{STDIN_PIPE});
 997                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 998
 999                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1000                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1001         }
1002         $env_vars->{SMBD_TL_PID} = $pid;
1003         write_pid($env_vars, "smbd", $pid);
1004         print "DONE\n";
1005
1006         close(STDIN_READER);
1007
1008         return $self->wait_for_start($env_vars, $nmbd, $winbindd, $smbd);
1009 }
1010
1011 sub provision($$$$$$$$)
1012 {
1013         my ($self, $prefix, $server, $password, $extra_options, $dc_server_ip, $dc_server_ipv6, $no_delete_prefix) = @_;
1014
1015         ##
1016         ## setup the various environment variables we need
1017         ##
1018
1019         my $swiface = Samba::get_interface($server);
1020         my %ret = ();
1021         my $server_ip = "127.0.0.$swiface";
1022         my $server_ipv6 = sprintf("fd00:0000:0000:0000:0000:0000:5357:5f%02x", $swiface);
1023         my $domain = "SAMBA-TEST";
1024
1025         my $unix_name = ($ENV{USER} or $ENV{LOGNAME} or `PATH=/usr/ucb:$ENV{PATH} whoami`);
1026         chomp $unix_name;
1027         my $unix_uid = $>;
1028         my $unix_gids_str = $);
1029         my @unix_gids = split(" ", $unix_gids_str);
1030
1031         my $prefix_abs = abs_path($prefix);
1032         my $bindir_abs = abs_path($self->{bindir});
1033
1034         my @dirs = ();
1035
1036         my $shrdir="$prefix_abs/share";
1037         push(@dirs,$shrdir);
1038
1039         my $libdir="$prefix_abs/lib";
1040         push(@dirs,$libdir);
1041
1042         my $piddir="$prefix_abs/pid";
1043         push(@dirs,$piddir);
1044
1045         my $privatedir="$prefix_abs/private";
1046         push(@dirs,$privatedir);
1047
1048         my $lockdir="$prefix_abs/lockdir";
1049         push(@dirs,$lockdir);
1050
1051         my $eventlogdir="$prefix_abs/lockdir/eventlog";
1052         push(@dirs,$eventlogdir);
1053
1054         my $logdir="$prefix_abs/logs";
1055         push(@dirs,$logdir);
1056
1057         my $driver32dir="$shrdir/W32X86";
1058         push(@dirs,$driver32dir);
1059
1060         my $driver64dir="$shrdir/x64";
1061         push(@dirs,$driver64dir);
1062
1063         my $driver40dir="$shrdir/WIN40";
1064         push(@dirs,$driver40dir);
1065
1066         my $ro_shrdir="$shrdir/root-tmp";
1067         push(@dirs,$ro_shrdir);
1068
1069         my $msdfs_shrdir="$shrdir/msdfsshare";
1070         push(@dirs,$msdfs_shrdir);
1071
1072         my $msdfs_deeppath="$msdfs_shrdir/deeppath";
1073         push(@dirs,$msdfs_deeppath);
1074
1075         my $badnames_shrdir="$shrdir/badnames";
1076         push(@dirs,$badnames_shrdir);
1077
1078         my $lease1_shrdir="$shrdir/SMB2_10";
1079         push(@dirs,$lease1_shrdir);
1080
1081         my $lease2_shrdir="$shrdir/SMB3_00";
1082         push(@dirs,$lease2_shrdir);
1083
1084         my $manglenames_shrdir="$shrdir/manglenames";
1085         push(@dirs,$manglenames_shrdir);
1086
1087         # this gets autocreated by winbindd
1088         my $wbsockdir="$prefix_abs/winbindd";
1089         my $wbsockprivdir="$lockdir/winbindd_privileged";
1090
1091         my $nmbdsockdir="$prefix_abs/nmbd";
1092         unlink($nmbdsockdir);
1093
1094         ##
1095         ## create the test directory layout
1096         ##
1097         die ("prefix_abs = ''") if $prefix_abs eq "";
1098         die ("prefix_abs = '/'") if $prefix_abs eq "/";
1099
1100         mkdir($prefix_abs, 0777);
1101         print "CREATE TEST ENVIRONMENT IN '$prefix'...";
1102         if (not defined($no_delete_prefix) or not $no_delete_prefix) {
1103             system("rm -rf $prefix_abs/*");
1104         }
1105         mkdir($_, 0777) foreach(@dirs);
1106
1107         my $fs_specific_conf = $self->get_fs_specific_conf($shrdir);
1108
1109         ##
1110         ## lockdir and piddir must be 0755
1111         ##
1112         chmod 0755, $lockdir;
1113         chmod 0755, $piddir;
1114
1115
1116         ##
1117         ## create ro and msdfs share layout
1118         ##
1119
1120         chmod 0755, $ro_shrdir;
1121         my $unreadable_file = "$ro_shrdir/unreadable_file";
1122         unless (open(UNREADABLE_FILE, ">$unreadable_file")) {
1123                 warn("Unable to open $unreadable_file");
1124                 return undef;
1125         }
1126         close(UNREADABLE_FILE);
1127         chmod 0600, $unreadable_file;
1128
1129         my $msdfs_target = "$ro_shrdir/msdfs-target";
1130         unless (open(MSDFS_TARGET, ">$msdfs_target")) {
1131                 warn("Unable to open $msdfs_target");
1132                 return undef;
1133         }
1134         close(MSDFS_TARGET);
1135         chmod 0666, $msdfs_target;
1136         symlink "msdfs:$server_ip\\ro-tmp,$server_ipv6\\ro-tmp",
1137                 "$msdfs_shrdir/msdfs-src1";
1138         symlink "msdfs:$server_ipv6\\ro-tmp", "$msdfs_shrdir/deeppath/msdfs-src2";
1139
1140         ##
1141         ## create bad names in $badnames_shrdir
1142         ##
1143         ## (An invalid name, would be mangled to 8.3).
1144         my $badname_target = "$badnames_shrdir/\340|\231\216\377\177";
1145         unless (open(BADNAME_TARGET, ">$badname_target")) {
1146                 warn("Unable to open $badname_target");
1147                 return undef;
1148         }
1149         close(BADNAME_TARGET);
1150         chmod 0666, $badname_target;
1151
1152         ## (A bad name, would not be mangled to 8.3).
1153         my $badname_target = "$badnames_shrdir/\240\276\346\327\377\177";
1154         unless (open(BADNAME_TARGET, ">$badname_target")) {
1155                 warn("Unable to open $badname_target");
1156                 return undef;
1157         }
1158         close(BADNAME_TARGET);
1159         chmod 0666, $badname_target;
1160
1161         ## (A bad good name).
1162         my $badname_target = "$badnames_shrdir/blank.txt";
1163         unless (open(BADNAME_TARGET, ">$badname_target")) {
1164                 warn("Unable to open $badname_target");
1165                 return undef;
1166         }
1167         close(BADNAME_TARGET);
1168         chmod 0666, $badname_target;
1169
1170         ##
1171         ## create mangleable directory names in $manglenames_shrdir
1172         ##
1173         my $manglename_target = "$manglenames_shrdir/foo:bar";
1174         mkdir($manglename_target, 0777);
1175
1176         my $conffile="$libdir/server.conf";
1177
1178         my $nss_wrapper_pl = "$ENV{PERL} $self->{srcdir}/lib/nss_wrapper/nss_wrapper.pl";
1179         my $nss_wrapper_passwd = "$privatedir/passwd";
1180         my $nss_wrapper_group = "$privatedir/group";
1181         my $nss_wrapper_hosts = "$ENV{SELFTEST_PREFIX}/hosts";
1182         my $resolv_conf = "$privatedir/resolv.conf";
1183         my $dns_host_file = "$ENV{SELFTEST_PREFIX}/dns_host_file";
1184
1185         my $mod_printer_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/printing/modprinter.pl";
1186
1187         my $fake_snap_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/fake_snap.pl";
1188
1189         my @eventlog_list = ("dns server", "application");
1190
1191         ##
1192         ## calculate uids and gids
1193         ##
1194
1195         my ($max_uid, $max_gid);
1196         my ($uid_nobody, $uid_root, $uid_pdbtest, $uid_pdbtest2);
1197         my ($gid_nobody, $gid_nogroup, $gid_root, $gid_domusers, $gid_domadmins);
1198
1199         if ($unix_uid < 0xffff - 4) {
1200                 $max_uid = 0xffff;
1201         } else {
1202                 $max_uid = $unix_uid;
1203         }
1204
1205         $uid_root = $max_uid - 1;
1206         $uid_nobody = $max_uid - 2;
1207         $uid_pdbtest = $max_uid - 3;
1208         $uid_pdbtest2 = $max_uid - 4;
1209
1210         if ($unix_gids[0] < 0xffff - 5) {
1211                 $max_gid = 0xffff;
1212         } else {
1213                 $max_gid = $unix_gids[0];
1214         }
1215
1216         $gid_nobody = $max_gid - 1;
1217         $gid_nogroup = $max_gid - 2;
1218         $gid_root = $max_gid - 3;
1219         $gid_domusers = $max_gid - 4;
1220         $gid_domadmins = $max_gid - 5;
1221
1222         ##
1223         ## create conffile
1224         ##
1225
1226         unless (open(CONF, ">$conffile")) {
1227                 warn("Unable to open $conffile");
1228                 return undef;
1229         }
1230         print CONF "
1231 [global]
1232         netbios name = $server
1233         interfaces = $server_ip/8 $server_ipv6/64
1234         bind interfaces only = yes
1235         panic action = cd $self->{srcdir} && $self->{srcdir}/selftest/gdb_backtrace %d %\$(MAKE_TEST_BINARY)
1236         smbd:suicide mode = yes
1237
1238         workgroup = $domain
1239
1240         private dir = $privatedir
1241         pid directory = $piddir
1242         lock directory = $lockdir
1243         log file = $logdir/log.\%m
1244         log level = 1
1245         debug pid = yes
1246         max log size = 0
1247
1248         state directory = $lockdir
1249         cache directory = $lockdir
1250
1251         passdb backend = tdbsam
1252
1253         time server = yes
1254
1255         add user script =               $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1256         add group script =              $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action add --name %g
1257         add machine script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1258         add user to group script =      $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action add --member %u --name %g --group_path $nss_wrapper_group
1259         delete user script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action delete --name %u
1260         delete group script =           $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action delete --name %g
1261         delete user from group script = $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action delete --member %u --name %g --group_path $nss_wrapper_group
1262
1263         addprinter command =            $mod_printer_pl -a -s $conffile --
1264         deleteprinter command =         $mod_printer_pl -d -s $conffile --
1265
1266         eventlog list = application \"dns server\"
1267
1268         kernel oplocks = no
1269         kernel change notify = no
1270         smb2 leases = yes
1271
1272         logging = file
1273         printing = bsd
1274         printcap name = /dev/null
1275
1276         winbindd socket directory = $wbsockdir
1277         nmbd:socket dir = $nmbdsockdir
1278         idmap config * : range = 100000-200000
1279         winbind enum users = yes
1280         winbind enum groups = yes
1281         winbind separator = /
1282
1283 #       min receivefile size = 4000
1284
1285         read only = no
1286         server signing = auto
1287
1288         smbd:sharedelay = 100000
1289         smbd:writetimeupdatedelay = 500000
1290         map hidden = no
1291         map system = no
1292         map readonly = no
1293         store dos attributes = yes
1294         create mask = 755
1295         dos filemode = yes
1296         strict rename = yes
1297         vfs objects = acl_xattr fake_acls xattr_tdb streams_depot
1298
1299         printing = vlp
1300         print command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb print %p %s
1301         lpq command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpq %p
1302         lp rm command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lprm %p %j
1303         lp pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lppause %p %j
1304         lp resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpresume %p %j
1305         queue pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queuepause %p
1306         queue resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queueresume %p
1307         lpq cache time = 0
1308         print notify backchannel = yes
1309
1310         ncalrpc dir = $prefix_abs/ncalrpc
1311
1312         # The samba3.blackbox.smbclient_s3 test uses this to test that
1313         # sending messages works, and that the %m sub works.
1314         message command = mv %s $shrdir/message.%m
1315
1316         # fsrvp server requires registry shares
1317         registry shares = yes
1318
1319         # Used by RPC SRVSVC tests
1320         add share command = $bindir_abs/smbaddshare
1321         change share command = $bindir_abs/smbchangeshare
1322         delete share command = $bindir_abs/smbdeleteshare
1323
1324         # fruit:copyfile is a global option
1325         fruit:copyfile = yes
1326
1327         # Begin extra options
1328         $extra_options
1329         # End extra options
1330
1331         #Include user defined custom parameters if set
1332 ";
1333
1334         if (defined($ENV{INCLUDE_CUSTOM_CONF})) {
1335                 print CONF "\t$ENV{INCLUDE_CUSTOM_CONF}\n";
1336         }
1337
1338         print CONF "
1339 [tmp]
1340         path = $shrdir
1341         comment = smb username is [%U]
1342 [tmpsort]
1343         path = $shrdir
1344         comment = Load dirsort module
1345         vfs objects = dirsort acl_xattr fake_acls xattr_tdb streams_depot
1346 [tmpenc]
1347         path = $shrdir
1348         comment = encrypt smb username is [%U]
1349         smb encrypt = required
1350         vfs objects = dirsort
1351 [tmpguest]
1352         path = $shrdir
1353         guest ok = yes
1354 [guestonly]
1355         path = $shrdir
1356         guest only = yes
1357         guest ok = yes
1358 [forceuser]
1359         path = $shrdir
1360         force user = $unix_name
1361         guest ok = yes
1362 [forceuser_unixonly]
1363         path = $shrdir
1364         force user = pdbtest
1365         guest ok = yes
1366 [forcegroup]
1367         path = $shrdir
1368         force group = nogroup
1369         guest ok = yes
1370 [ro-tmp]
1371         path = $ro_shrdir
1372         guest ok = yes
1373 [write-list-tmp]
1374         path = $shrdir
1375         read only = yes
1376         write list = $unix_name
1377 [valid-users-tmp]
1378         path = $shrdir
1379         valid users = $unix_name
1380 [msdfs-share]
1381         path = $msdfs_shrdir
1382         msdfs root = yes
1383         msdfs shuffle referrals = yes
1384         guest ok = yes
1385 [hideunread]
1386         copy = tmp
1387         hide unreadable = yes
1388 [tmpcase]
1389         copy = tmp
1390         case sensitive = yes
1391 [hideunwrite]
1392         copy = tmp
1393         hide unwriteable files = yes
1394 [durable]
1395         copy = tmp
1396         kernel share modes = no
1397         kernel oplocks = no
1398         posix locking = no
1399 [fs_specific]
1400         copy = tmp
1401         $fs_specific_conf
1402 [print1]
1403         copy = tmp
1404         printable = yes
1405
1406 [print2]
1407         copy = print1
1408 [print3]
1409         copy = print1
1410         default devmode = no
1411 [lp]
1412         copy = print1
1413
1414 [nfs4acl_simple]
1415         path = $shrdir
1416         comment = smb username is [%U]
1417         nfs4:mode = simple
1418         vfs objects = nfs4acl_xattr xattr_tdb
1419
1420 [nfs4acl_special]
1421         path = $shrdir
1422         comment = smb username is [%U]
1423         nfs4:mode = special
1424         vfs objects = nfs4acl_xattr xattr_tdb
1425
1426 [xcopy_share]
1427         path = $shrdir
1428         comment = smb username is [%U]
1429         create mask = 777
1430         force create mode = 777
1431 [posix_share]
1432         path = $shrdir
1433         comment = smb username is [%U]
1434         create mask = 0777
1435         force create mode = 0
1436         directory mask = 0777
1437         force directory mode = 0
1438         vfs objects = xattr_tdb
1439 [aio]
1440         copy = tmp
1441         aio read size = 1
1442         aio write size = 1
1443
1444 [print\$]
1445         copy = tmp
1446
1447 [vfs_fruit]
1448         path = $shrdir
1449         vfs objects = catia fruit streams_xattr
1450         fruit:ressource = file
1451         fruit:metadata = netatalk
1452         fruit:locking = netatalk
1453         fruit:encoding = native
1454
1455 [badname-tmp]
1456         path = $badnames_shrdir
1457         guest ok = yes
1458
1459 [manglenames_share]
1460         path = $manglenames_shrdir
1461         guest ok = yes
1462
1463 [dynamic_share]
1464         path = $shrdir/%R
1465         guest ok = yes
1466
1467 [fsrvp_share]
1468         path = $shrdir
1469         comment = fake shapshots using rsync
1470         vfs objects = shell_snap shadow_copy2
1471         shell_snap:check path command = $fake_snap_pl --check
1472         shell_snap:create command = $fake_snap_pl --create
1473         shell_snap:delete command = $fake_snap_pl --delete
1474         # a relative path here fails, the snapshot dir is no longer found
1475         shadow:snapdir = $shrdir/.snapshots
1476         ";
1477         close(CONF);
1478
1479         ##
1480         ## create a test account
1481         ##
1482
1483         unless (open(PASSWD, ">$nss_wrapper_passwd")) {
1484            warn("Unable to open $nss_wrapper_passwd");
1485            return undef;
1486         }
1487         print PASSWD "nobody:x:$uid_nobody:$gid_nobody:nobody gecos:$prefix_abs:/bin/false
1488 $unix_name:x:$unix_uid:$unix_gids[0]:$unix_name gecos:$prefix_abs:/bin/false
1489 pdbtest:x:$uid_pdbtest:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
1490 pdbtest2:x:$uid_pdbtest2:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
1491 ";
1492         if ($unix_uid != 0) {
1493                 print PASSWD "root:x:$uid_root:$gid_root:root gecos:$prefix_abs:/bin/false
1494 ";
1495         }
1496         close(PASSWD);
1497
1498         unless (open(GROUP, ">$nss_wrapper_group")) {
1499              warn("Unable to open $nss_wrapper_group");
1500              return undef;
1501         }
1502         print GROUP "nobody:x:$gid_nobody:
1503 nogroup:x:$gid_nogroup:nobody
1504 $unix_name-group:x:$unix_gids[0]:
1505 domusers:X:$gid_domusers:
1506 domadmins:X:$gid_domadmins:
1507 ";
1508         if ($unix_gids[0] != 0) {
1509                 print GROUP "root:x:$gid_root:
1510 ";
1511         }
1512
1513         close(GROUP);
1514
1515         ## hosts
1516         my $hostname = lc($server);
1517         unless (open(HOSTS, ">>$nss_wrapper_hosts")) {
1518                 warn("Unable to open $nss_wrapper_hosts");
1519                 return undef;
1520         }
1521         print HOSTS "${server_ip} ${hostname}.samba.example.com ${hostname}\n";
1522         print HOSTS "${server_ipv6} ${hostname}.samba.example.com ${hostname}\n";
1523         close(HOSTS);
1524
1525         ## hosts
1526         unless (open(RESOLV_CONF, ">$resolv_conf")) {
1527                 warn("Unable to open $resolv_conf");
1528                 return undef;
1529         }
1530         if (defined($dc_server_ip) or defined($dc_server_ipv6)) {
1531                 if (defined($dc_server_ip)) {
1532                         print RESOLV_CONF "nameserver $dc_server_ip\n";
1533                 }
1534                 if (defined($dc_server_ipv6)) {
1535                         print RESOLV_CONF "nameserver $dc_server_ipv6\n";
1536                 }
1537         } else {
1538                 print RESOLV_CONF "nameserver ${server_ip}\n";
1539                 print RESOLV_CONF "nameserver ${server_ipv6}\n";
1540         }
1541         close(RESOLV_CONF);
1542
1543         foreach my $evlog (@eventlog_list) {
1544                 my $evlogtdb = "$eventlogdir/$evlog.tdb";
1545                 open(EVENTLOG, ">$evlogtdb") or die("Unable to open $evlogtdb");
1546                 close(EVENTLOG);
1547         }
1548
1549         $ENV{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1550         $ENV{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1551         $ENV{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
1552         $ENV{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
1553         if ($ENV{SAMBA_DNS_FAKING}) {
1554                 $ENV{RESOLV_WRAPPER_CONF} = $resolv_conf;
1555         } else {
1556                 $ENV{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
1557         }
1558
1559         my $cmd = "UID_WRAPPER_ROOT=1 " . Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $unix_name > /dev/null";
1560         unless (open(PWD, "|$cmd")) {
1561              warn("Unable to set password for test account\n$cmd");
1562              return undef;
1563         }
1564         print PWD "$password\n$password\n";
1565         unless (close(PWD)) {
1566              warn("Unable to set password for test account\n$cmd");
1567              return undef;
1568         }
1569         print "DONE\n";
1570
1571         open(DNS_UPDATE_LIST, ">$prefix/dns_update_list") or die("Unable to open $$prefix/dns_update_list");
1572         print DNS_UPDATE_LIST "A $server. $server_ip\n";
1573         print DNS_UPDATE_LIST "AAAA $server. $server_ipv6\n";
1574         close(DNS_UPDATE_LIST);
1575
1576         $ret{SERVER_IP} = $server_ip;
1577         $ret{SERVER_IPV6} = $server_ipv6;
1578         $ret{NMBD_TEST_LOG} = "$prefix/nmbd_test.log";
1579         $ret{NMBD_TEST_LOG_POS} = 0;
1580         $ret{WINBINDD_TEST_LOG} = "$prefix/winbindd_test.log";
1581         $ret{WINBINDD_TEST_LOG_POS} = 0;
1582         $ret{SMBD_TEST_LOG} = "$prefix/smbd_test.log";
1583         $ret{SMBD_TEST_LOG_POS} = 0;
1584         $ret{SERVERCONFFILE} = $conffile;
1585         $ret{CONFIGURATION} ="-s $conffile";
1586         $ret{SERVER} = $server;
1587         $ret{USERNAME} = $unix_name;
1588         $ret{USERID} = $unix_uid;
1589         $ret{DOMAIN} = $domain;
1590         $ret{NETBIOSNAME} = $server;
1591         $ret{PASSWORD} = $password;
1592         $ret{PIDDIR} = $piddir;
1593         $ret{SELFTEST_WINBINDD_SOCKET_DIR} = $wbsockdir;
1594         $ret{WINBINDD_PRIV_PIPE_DIR} = $wbsockprivdir;
1595         $ret{NMBD_SOCKET_DIR} = $nmbdsockdir;
1596         $ret{SOCKET_WRAPPER_DEFAULT_IFACE} = $swiface;
1597         $ret{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1598         $ret{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1599         $ret{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
1600         $ret{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
1601         $ret{NSS_WRAPPER_MODULE_SO_PATH} = Samba::nss_wrapper_winbind_so_path($self);
1602         $ret{NSS_WRAPPER_MODULE_FN_PREFIX} = "winbind";
1603         if ($ENV{SAMBA_DNS_FAKING}) {
1604                 $ret{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
1605         } else {
1606                 $ret{RESOLV_WRAPPER_CONF} = $resolv_conf;
1607         }
1608         $ret{LOCAL_PATH} = "$shrdir";
1609         $ret{LOGDIR} = $logdir;
1610
1611         return \%ret;
1612 }
1613
1614 sub wait_for_start($$$$$)
1615 {
1616         my ($self, $envvars, $nmbd, $winbindd, $smbd) = @_;
1617         my $ret;
1618
1619         if ($nmbd eq "yes") {
1620                 my $count = 0;
1621
1622                 # give time for nbt server to register its names
1623                 print "checking for nmbd\n";
1624
1625                 # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
1626                 my $nmblookup = Samba::bindir_path($self, "nmblookup");
1627
1628                 do {
1629                         $ret = system("$nmblookup $envvars->{CONFIGURATION} $envvars->{SERVER}");
1630                         if ($ret != 0) {
1631                                 sleep(1);
1632                         } else {
1633                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
1634                                 system("$nmblookup $envvars->{CONFIGURATION} __SAMBA__");
1635                                 system("$nmblookup $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
1636                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
1637                         }
1638                         $count++;
1639                 } while ($ret != 0 && $count < 10);
1640                 if ($count == 10) {
1641                         print "NMBD not reachable after 10 retries\n";
1642                         teardown_env($self, $envvars);
1643                         return 0;
1644                 }
1645         }
1646
1647         if ($winbindd eq "yes") {
1648             print "checking for winbindd\n";
1649             my $count = 0;
1650             do {
1651                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --ping-dc");
1652                 if ($ret != 0) {
1653                     sleep(2);
1654                 }
1655                 $count++;
1656             } while ($ret != 0 && $count < 10);
1657             if ($count == 10) {
1658                 print "WINBINDD not reachable after 20 seconds\n";
1659                 teardown_env($self, $envvars);
1660                 return 0;
1661             }
1662         }
1663
1664         if ($smbd eq "yes") {
1665             # make sure smbd is also up set
1666             print "wait for smbd\n";
1667
1668             my $count = 0;
1669             do {
1670                 $ret = system(Samba::bindir_path($self, "smbclient") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
1671                 if ($ret != 0) {
1672                     sleep(2);
1673                 }
1674                 $count++
1675             } while ($ret != 0 && $count < 10);
1676             if ($count == 10) {
1677                 print "SMBD failed to start up in a reasonable time (20sec)\n";
1678                 teardown_env($self, $envvars);
1679                 return 0;
1680             }
1681         }
1682
1683         # Ensure we have domain users mapped.
1684         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=513 unixgroup=domusers type=domain");
1685         if ($ret != 0) {
1686             return 1;
1687         }
1688         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=512 unixgroup=domadmins type=domain");
1689         if ($ret != 0) {
1690             return 1;
1691         }
1692
1693         if ($winbindd eq "yes") {
1694             # note: creating builtin groups requires winbindd for the
1695             # unix id allocator
1696             $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} sam createbuiltingroup Users");
1697             if ($ret != 0) {
1698                 print "Failed to create BUILTIN\\Users group\n";
1699                 return 0;
1700             }
1701             my $count = 0;
1702             do {
1703                 system(Samba::bindir_path($self, "net") . " $envvars->{CONFIGURATION} cache flush");
1704                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --sid-to-gid=S-1-5-32-545");
1705                 if ($ret != 0) {
1706                     sleep(2);
1707                 }
1708                 $count++;
1709             } while ($ret != 0 && $count < 10);
1710             if ($count == 10) {
1711                 print "WINBINDD not reachable after 20 seconds\n";
1712                 teardown_env($self, $envvars);
1713                 return 0;
1714             }
1715         }
1716
1717         print $self->getlog_env($envvars);
1718
1719         return 1;
1720 }
1721
1722 1;