firmware/export/config-ipodnano.h

   1 /*
   2  * This config file is for the Apple iPod Nano
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 #define IPOD_ARCH 1
   7
   8 /* For Rolo and boot loader */
   9 #define MODEL_NUMBER 4
  10
  11 /* define this if you use an ATA controller */
  12 #define HAVE_ATA
  13
  14 /* define this if you have recording possibility */
  15 #define HAVE_RECORDING
  16
  17 /* Define bitmask of input sources - recordable bitmask can be defined
  18    explicitly if different */
  19 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN)
  20
  21 /* define the bitmask of hardware sample rates */
  22 #define HW_SAMPR_CAPS   (SAMPR_CAP_44)
  23
  24 /* define the bitmask of recording sample rates */
  25 #define REC_SAMPR_CAPS  (SAMPR_CAP_44)
  26
  27 /* define this if you have a bitmap LCD display */
  28 #define HAVE_LCD_BITMAP
  29
  30 /* define this if you have a colour LCD */
  31 #define HAVE_LCD_COLOR
  32
  33 /* define this if you want album art for this target */
  34 #define HAVE_ALBUMART
  35
  36 /* define this if you have access to the quickscreen */
  37 #define HAVE_QUICKSCREEN
  38 /* define this if you have access to the pitchscreen */
  39 #define HAVE_PITCHSCREEN
  40
  41 /* define this if you would like tagcache to build on this target */
  42 #define HAVE_TAGCACHE
  43
  44 /* LCD dimensions */
  45 #define LCD_WIDTH  176
  46 #define LCD_HEIGHT 132
  47 #define LCD_DEPTH  16   /* 65536 colours */
  48 #define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 byte-swapped */
  49
  50 #define CONFIG_KEYPAD IPOD_4G_PAD
  51
  52 /* Define this if you do software codec */
  53 #define CONFIG_CODEC SWCODEC
  54
  55 /* define this if you have a real-time clock */
  56 #define CONFIG_RTC RTC_PCF50605
  57
  58 /* Define if the device can wake from an RTC alarm */
  59 #define HAVE_RTC_ALARM
  60
  61 /* Define this if you can switch on/off the accessory power supply */
  62 #define HAVE_ACCESSORY_SUPPLY
  63
  64 /* Define this if you have a software controlled poweroff */
  65 #define HAVE_SW_POWEROFF
  66
  67 /* The number of bytes reserved for loadable codecs */
  68 #define CODEC_SIZE 0x80000
  69
  70 /* The number of bytes reserved for loadable plugins */
  71 #define PLUGIN_BUFFER_SIZE 0x80000
  72
  73 /* Define this if you have the WM8975 audio codec */
  74 #define HAVE_WM8975
  75
  76 #define AB_REPEAT_ENABLE 1
  77 #define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
  78
  79 /* Define this for LCD backlight available */
  80 #define HAVE_BACKLIGHT
  81 #define HAVE_BACKLIGHT_BRIGHTNESS
  82
  83 /* Main LCD backlight brightness range and defaults */
  84 #define MIN_BRIGHTNESS_SETTING      1
  85 #define MAX_BRIGHTNESS_SETTING      32
  86 #define DEFAULT_BRIGHTNESS_SETTING  16
  87
  88 /* We can fade the backlight by using PWM */
  89 #define HAVE_BACKLIGHT_PWM_FADING
  90
  91 /* define this if the unit uses a scrollwheel for navigation */
  92 #define HAVE_SCROLLWHEEL
  93 /* define from which rotation speed [degree/sec] on the acceleration starts */
  94 #define WHEEL_ACCEL_START 270
  95 /* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
  96 #define WHEEL_ACCELERATION 3
  97
  98 /* Define this if you can detect headphones */
  99 #define HAVE_HEADPHONE_DETECTION
 100
 101 /* define this if you have a flash memory storage */
 102 #define HAVE_FLASH_STORAGE
 103
 104 #define BATTERY_CAPACITY_DEFAULT 300   /* default battery capacity */
 105 #define BATTERY_CAPACITY_MIN     200   /* min. capacity selectable */
 106 #define BATTERY_CAPACITY_MAX     600   /* max. capacity selectable */
 107 #define BATTERY_CAPACITY_INC      20    /* capacity increment */
 108 #define BATTERY_TYPES_COUNT        1   /* only one type */
 109
 110 /* Hardware controlled charging? FIXME */
 111 //#define CONFIG_CHARGING CHARGING_SIMPLE
 112
 113 /* define this if the unit can be powered or charged via USB */
 114 #define HAVE_USB_POWER
 115
 116 #ifndef SIMULATOR
 117
 118 /* Define this if you have a PortalPlayer PP5022 */
 119 #define CONFIG_CPU PP5022
 120
 121 /* Define this if you want to use the PP5020 i2c interface */
 122 #define CONFIG_I2C I2C_PP5020
 123
 124 /* define this if the hardware can be powered off while charging */
 125 //#define HAVE_POWEROFF_WHILE_CHARGING
 126
 127 /* The start address index for ROM builds */
 128 #define ROM_START 0x00000000
 129
 130 /* The size of the flash ROM */
 131 #define FLASH_SIZE 0x100000
 132
 133 /* Define this to the CPU frequency */
 134 #define CPU_FREQ      24000000
 135
 136 #define CONFIG_LCD LCD_IPODNANO
 137
 138 /* Offset ( in the firmware file's header ) to the file length */
 139 #define FIRMWARE_OFFSET_FILE_LENGTH 0
 140
 141 /* Offset ( in the firmware file's header ) to the file CRC */
 142 #define FIRMWARE_OFFSET_FILE_CRC 0
 143
 144 /* Offset ( in the firmware file's header ) to the real data */
 145 #define FIRMWARE_OFFSET_FILE_DATA 8
 146
 147 #define USB_IPODSTYLE
 148
 149 /* USB On-the-go */
 150 #define CONFIG_USBOTG USBOTG_ARC
 151
 152 /* enable these for the experimental usb stack */
 153 #define HAVE_USBSTACK
 154 #define USB_VENDOR_ID 0x05ac
 155 #define USB_PRODUCT_ID 0x120a
 156
 157 /* Virtual LED (icon) */
 158 #define CONFIG_LED LED_VIRTUAL
 159
 160 /* Define this if you have adjustable CPU frequency */
 161 #define HAVE_ADJUSTABLE_CPU_FREQ
 162
 163 /* Define this if you can read an absolute wheel position */
 164 #define HAVE_WHEEL_POSITION
 165
 166 #define BOOTFILE_EXT "ipod"
 167 #define BOOTFILE "rockbox." BOOTFILE_EXT
 168 #define BOOTDIR "/.rockbox"
 169
 170 #define ICODE_ATTR_TREMOR_NOT_MDCT
 171
 172 #endif