When setting a cache path also enable the cache implicitly.
[Rockbox.git] / firmware / export / config-e200.h
blobc49ee23841cac313ae3ac007fb6151ae3593ecf6
1 /*
2 * This config file is for the Sandisk Sansa e200
3 */
4 #define TARGET_TREE /* this target is using the target tree system */
6 /* For Rolo and boot loader */
7 #define MODEL_NUMBER 16
8 #define MODEL_NAME "Sandisk Sansa e200"
10 #define HW_SAMPR_CAPS (SAMPR_CAP_44)
12 /* define this if you have recording possibility */
13 #define HAVE_RECORDING
15 #define REC_SAMPR_CAPS (SAMPR_CAP_22)
16 #define REC_FREQ_DEFAULT REC_FREQ_22 /* Default is not 44.1kHz */
17 #define REC_SAMPR_DEFAULT SAMPR_22
19 /* Define bitmask of input sources - recordable bitmask can be defined
20 explicitly if different */
21 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
23 /* define this if you have a bitmap LCD display */
24 #define HAVE_LCD_BITMAP
26 /* define this if you have a colour LCD */
27 #define HAVE_LCD_COLOR
29 /* define this if you want album art for this target */
30 #define HAVE_ALBUMART
32 /* define this if you have a light associated with the buttons */
33 #define HAVE_BUTTON_LIGHT
35 /* define this if you have access to the quickscreen */
36 #define HAVE_QUICKSCREEN
38 /* define this if you have access to the pitchscreen */
39 #define HAVE_PITCHSCREEN
41 /* define this if you would like tagcache to build on this target */
42 #define HAVE_TAGCACHE
44 /* LCD dimensions */
45 #define LCD_WIDTH 176
46 #define LCD_HEIGHT 220
47 #define LCD_DEPTH 16 /* 65536 colours */
48 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
50 /* define this if you have LCD enable function */
51 #define HAVE_LCD_ENABLE
53 /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
54 should be defined as well. */
55 #define HAVE_LCD_SLEEP
57 /* define this if you can flip your LCD */
58 #define HAVE_LCD_FLIP
60 /* define this if you can invert the colours on your LCD */
61 #define HAVE_LCD_INVERT
63 /* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
65 #define CONFIG_KEYPAD SANSA_E200_PAD
67 /* Define this if you do software codec */
68 #define CONFIG_CODEC SWCODEC
69 /* There is no hardware tone control */
70 #define HAVE_SW_TONE_CONTROLS
71 /* The PP5024 has a built-in AustriaMicrosystems AS3514 */
72 #define HAVE_AS3514
74 /* define this if you have a real-time clock */
75 #ifndef BOOTLOADER
76 #define CONFIG_RTC RTC_AS3514
77 #endif
79 /* Define this if you have a software controlled poweroff */
80 #define HAVE_SW_POWEROFF
82 /* Some Sansa E200s seem to be FAT16 formatted */
83 #define HAVE_FAT16SUPPORT
85 /* The number of bytes reserved for loadable codecs */
86 #define CODEC_SIZE 0x80000
88 /* The number of bytes reserved for loadable plugins */
89 #define PLUGIN_BUFFER_SIZE 0x80000
91 #define AB_REPEAT_ENABLE 1
93 /* FM Tuner */
94 #define CONFIG_TUNER LV24020LP
95 #define HAVE_TUNER_PWR_CTRL
97 /* Define this for LCD backlight available */
98 #define HAVE_BACKLIGHT
99 #define HAVE_BACKLIGHT_BRIGHTNESS
101 /* define this if the unit uses a scrollwheel for navigation */
102 #define HAVE_SCROLLWHEEL
103 /* define from which rotation speed [degree/sec] on the acceleration starts */
104 #define WHEEL_ACCEL_START 540
105 /* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
106 #define WHEEL_ACCELERATION 1
108 /* define this if you have a flash memory storage */
109 #define HAVE_FLASH_STORAGE
111 #define BATTERY_CAPACITY_DEFAULT 750 /* default battery capacity */
112 #define BATTERY_CAPACITY_MIN 750 /* min. capacity selectable */
113 #define BATTERY_CAPACITY_MAX 750 /* max. capacity selectable */
114 #define BATTERY_CAPACITY_INC 0 /* capacity increment */
115 #define BATTERY_TYPES_COUNT 1 /* only one type */
117 /* Hardware controlled charging? FIXME */
118 #define CONFIG_CHARGING CHARGING_SIMPLE
120 /* define this if the unit can be powered or charged via USB */
121 #define HAVE_USB_POWER
123 /** Non-simulator section **/
124 #ifndef SIMULATOR
126 /* Define this if you have a PortalPlayer PP5024 */
127 #define CONFIG_CPU PP5024
129 /* Define this if you want to use the PP5024 i2c interface */
130 #define CONFIG_I2C I2C_PP5024
132 /* define this if the hardware can be powered off while charging */
133 /* Sansa can't be powered off while charging */
134 /* #define HAVE_POWEROFF_WHILE_CHARGING */
136 /* The start address index for ROM builds */
137 #define ROM_START 0x00000000
139 /* Define this to the CPU frequency */
140 #define CPU_FREQ 75000000
142 /* Type of LCD TODO: hopefully the same as the x5 but check this*/
143 #define CONFIG_LCD LCD_X5
145 /* Offset ( in the firmware file's header ) to the file CRC and data. These are
146 only used when loading the old format rockbox.e200 file */
147 #define FIRMWARE_OFFSET_FILE_CRC 0x0
148 #define FIRMWARE_OFFSET_FILE_DATA 0x8
150 #ifndef BOOTLOADER
151 #define HAVE_MULTIVOLUME
152 #define HAVE_HOTSWAP
153 #endif
155 /* #define USB_IPODSTYLE */
157 /* USB On-the-go */
158 #define CONFIG_USBOTG USBOTG_ARC
160 /* enable these for the experimental usb stack */
161 #define HAVE_USBSTACK
162 #define USB_VENDOR_ID 0x0781
163 #define USB_PRODUCT_ID 0x7421
165 /* Virtual LED (icon) */
166 #define CONFIG_LED LED_VIRTUAL
168 /* Define this if you have adjustable CPU frequency */
169 #define HAVE_ADJUSTABLE_CPU_FREQ
171 #define MI4_FORMAT
172 #define BOOTFILE_EXT "mi4"
173 #define BOOTFILE "rockbox." BOOTFILE_EXT
174 #define OLD_BOOTFILE "rockbox.e200"
175 #define BOOTDIR "/.rockbox"
177 #define ICODE_ATTR_TREMOR_NOT_MDCT
179 #define INCLUDE_TIMEOUT_API
181 #endif /* SIMULATOR */
183 /** Port-specific settings **/
185 /* Main LCD backlight brightness range and defaults */
186 #define MIN_BRIGHTNESS_SETTING 1
187 #define MAX_BRIGHTNESS_SETTING 12
188 #define DEFAULT_BRIGHTNESS_SETTING 6
190 /* Default recording levels */
191 #define DEFAULT_REC_MIC_GAIN 23
192 #define DEFAULT_REC_LEFT_GAIN 23
193 #define DEFAULT_REC_RIGHT_GAIN 23
195 #ifdef E200R_INSTALLER
196 #define IRAMORIG 0x40004000
197 #endif