add the correct input file to makeindex call
[Rockbox.git] / firmware / drivers / wm8731l.c
blobbe9bf14099690a63e3a650357653594d0fc85e27
1 /***************************************************************************
2 * __________ __ ___.
3 * Open \______ \ ____ ____ | | _\_ |__ _______ ___
4 * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
5 * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
6 * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
7 * \/ \/ \/ \/ \/
8 * $Id$
10 * Driver for WM8731L audio codec
12 * Based on code from the ipodlinux project - http://ipodlinux.org/
13 * Adapted for Rockbox in January 2006
15 * Original file: linux/arch/armnommu/mach-ipod/audio.c
17 * Copyright (c) 2003-2005 Bernard Leach (leachbj@bouncycastle.org)
19 * All files in this archive are subject to the GNU General Public License.
20 * See the file COPYING in the source tree root for full license agreement.
22 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
23 * KIND, either express or implied.
25 ****************************************************************************/
26 #include "lcd.h"
27 #include "cpu.h"
28 #include "kernel.h"
29 #include "thread.h"
30 #include "power.h"
31 #include "debug.h"
32 #include "system.h"
33 #include "sprintf.h"
34 #include "button.h"
35 #include "string.h"
36 #include "file.h"
37 #include "buffer.h"
38 #include "audio.h"
40 #include "wmcodec.h"
41 #include "wm8731l.h"
43 #define IPOD_PCM_LEVEL 0x65 /* -6dB */
46 int wmcodec_mute(int mute)
48 if (mute)
50 /* Set DACMU = 1 to soft-mute the audio DACs. */
51 wmcodec_write(DACCTRL, 0x8);
52 } else {
53 /* Set DACMU = 0 to soft-un-mute the audio DACs. */
54 wmcodec_write(DACCTRL, 0x0);
57 return 0;
60 /** From ipodLinux **/
61 static void codec_set_active(int active)
63 /* set active to 0x0 or 0x1 */
64 if (active) {
65 wmcodec_write(ACTIVECTRL, 0x01);
66 } else {
67 wmcodec_write(ACTIVECTRL, 0x00);
72 /* Silently enable / disable audio output */
73 void wmcodec_enable_output(bool enable)
75 if (enable)
77 /* reset the I2S controller into known state */
78 i2s_reset();
80 wmcodec_write(RESET, 0x0); /*Reset*/
82 codec_set_active(0x0);
84 #ifdef HAVE_WM8721
85 /* DACSEL=1 */
86 wmcodec_write(0x4, 0x10);
87 #elif defined HAVE_WM8731
88 /* DACSEL=1, BYPASS=1 */
89 wmcodec_write(0x4, 0x18);
90 #endif
92 /* set power register to POWEROFF=0 on OUTPD=0, DACPD=0 */
93 wmcodec_write(PWRMGMT, 0x67);
95 /* BCLKINV=0(Dont invert BCLK) MS=1(Enable Master) LRSWAP=0 LRP=0 */
96 /* IWL=00(16 bit) FORMAT=10(I2S format) */
97 wmcodec_write(AINTFCE, 0x42);
99 wmcodec_set_sample_rate(WM8731L_44100HZ);
101 /* set the volume to -6dB */
102 wmcodec_write(LOUTVOL, IPOD_PCM_LEVEL);
103 wmcodec_write(ROUTVOL, 0x100 | IPOD_PCM_LEVEL);
105 /* ACTIVE=1 */
106 codec_set_active(1);
108 /* 5. Set DACMU = 0 to soft-un-mute the audio DACs. */
109 wmcodec_write(DACCTRL, 0x0);
111 #if defined(IRIVER_H10) || defined(IRIVER_H10_5GB)
112 /* We need to enable bit 4 of GPIOL for output for sound on H10 */
113 GPIOL_OUTPUT_VAL |= 0x10;
114 #endif
115 wmcodec_mute(0);
116 } else {
117 #if defined(IRIVER_H10) || defined(IRIVER_H10_5GB)
118 /* We need to disable bit 4 of GPIOL to disable sound on H10 */
119 GPIOL_OUTPUT_VAL &= ~0x10;
120 #endif
121 wmcodec_mute(1);
125 int wmcodec_set_master_vol(int vol_l, int vol_r)
127 /* +6 to -73dB 1dB steps (plus mute == 80levels) 7bits */
128 /* 1111111 == +6dB */
129 /* 1111001 == 0dB */
130 /* 0110000 == -73dB */
131 /* 0101111 == mute (0x2f) */
133 wmcodec_write(LOUTVOL, vol_l);
134 wmcodec_write(ROUTVOL, vol_r);
136 return 0;
139 int wmcodec_set_mixer_vol(int channel1, int channel2)
141 (void)channel1;
142 (void)channel2;
144 return 0;
147 void wmcodec_set_bass(int value)
149 (void)value;
152 void wmcodec_set_treble(int value)
154 (void)value;
157 /* Nice shutdown of WM8731 codec */
158 void wmcodec_close(void)
160 /* set DACMU=1 DEEMPH=0 */
161 wmcodec_write(DACCTRL, 0x8);
163 /* ACTIVE=0 */
164 codec_set_active(0x0);
166 /* line in mute left & right*/
167 wmcodec_write(LINVOL, 0x100 | 0x80);
169 /* set DACSEL=0, MUTEMIC=1 */
170 wmcodec_write(0x4, 0x2);
172 /* set POWEROFF=0 OUTPD=0 DACPD=1 */
173 wmcodec_write(PWRMGMT, 0x6f);
175 /* set POWEROFF=1 OUTPD=1 DACPD=1 */
176 wmcodec_write(PWRMGMT, 0xff);
179 /* Change the order of the noise shaper, 5th order is recommended above 32kHz */
180 void wmcodec_set_nsorder(int order)
182 (void)order;
185 void wmcodec_set_sample_rate(int sampling_control)
187 codec_set_active(0x0);
188 wmcodec_write(SAMPCTRL, sampling_control);
189 codec_set_active(0x1);
192 void wmcodec_enable_recording(bool source_mic)
194 (void)source_mic;
197 void wmcodec_disable_recording(void)
202 void wmcodec_set_recvol(int left, int right, int type)
204 (void)left;
205 (void)right;
206 (void)type;
209 void wmcodec_set_monitor(int enable)
211 (void)enable;