firmware/export/config-c100.h

   1 /*
   2  * This config file is for the Sansa C100 series
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 /* For Rolo and boot loader */
   7 #define MODEL_NUMBER 30
   8
   9 /* define this if you have recording possibility */
  10 //#define HAVE_RECORDING
  11
  12 /* Define bitmask of input sources - recordable bitmask can be defined
  13    explicitly if different */
  14 //#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_SPDIF)
  15
  16 /* define this if you have a bitmap LCD display */
  17 #define HAVE_LCD_BITMAP
  18
  19 /* define this if you have a colour LCD */
  20 #define HAVE_LCD_COLOR
  21
  22 /* define this if you can flip your LCD */
  23 #define HAVE_LCD_FLIP
  24
  25 /* define this if you can invert the colours on your LCD */
  26 #define HAVE_LCD_INVERT
  27
  28 /* define this if you have access to the quickscreen */
  29 #define HAVE_QUICKSCREEN
  30
  31 /* define this if you have access to the pitchscreen */
  32 #define HAVE_PITCHSCREEN
  33
  34 /* define this if you would like tagcache to build on this target */
  35 #define HAVE_TAGCACHE
  36
  37 /* define this if you have a flash memory storage */
  38 #define HAVE_FLASH_STORAGE
  39
  40 /* LCD dimensions */
  41 #define LCD_WIDTH  128
  42 #define LCD_HEIGHT 64
  43 #define LCD_DEPTH  16   /* 65536 colours */
  44 #define LCD_PIXELFORMAT RGB565   /*rgb565*/
  45
  46 /*#define LCD_PIXELFORMAT VERTICAL_PACKING*/
  47
  48 /* define this to indicate your device's keypad */
  49 #define CONFIG_KEYPAD SANSA_C100_PAD
  50
  51 /* define this if you have a real-time clock */
  52 #define CONFIG_RTC RTC_TCC77X
  53
  54 /* define this if you have RTC RAM available for settings */
  55 //#define HAVE_RTC_RAM
  56
  57 /* Define this if you have a software controlled poweroff */
  58 #define HAVE_SW_POWEROFF
  59
  60 /* The number of bytes reserved for loadable plugins */
  61 #define PLUGIN_BUFFER_SIZE 0x8000
  62
  63 #define AB_REPEAT_ENABLE 1
  64
  65 /* Define this if you do software codec */
  66 #define CONFIG_CODEC SWCODEC
  67
  68 /* Define this if you have the TLV320 audio codec */
  69 #define HAVE_TLV320
  70
  71 /* TLV320 has no tone controls, so we use the software ones */
  72 #define HAVE_SW_TONE_CONTROLS
  73
  74 /* Define this for LCD backlight available */
  75 #define HAVE_BACKLIGHT
  76
  77 #define CONFIG_I2C I2C_TCC77X
  78
  79 #define BATTERY_CAPACITY_DEFAULT 540 /* default battery capacity */
  80 #define BATTERY_CAPACITY_MIN 540 /* min. capacity selectable */
  81 #define BATTERY_CAPACITY_MAX 540 /* max. capacity selectable */
  82 #define BATTERY_CAPACITY_INC 50   /* capacity increment */
  83 #define BATTERY_TYPES_COUNT  1    /* only one type */
  84
  85 /* define this if the unit should not shut down on low battery. */
  86 #define NO_LOW_BATTERY_SHUTDOWN
  87
  88 #ifndef SIMULATOR
  89
  90 /* Define this if you have a TCC770 */
  91 #define CONFIG_CPU TCC770
  92
  93 /* Define this if you have ATA power-off control */
  94 #define HAVE_ATA_POWER_OFF
  95
  96 /* Define this to the CPU frequency */
  97 #define CPU_FREQ      120000000
  98
  99 /* Offset ( in the firmware file's header ) to the file length */
 100 #define FIRMWARE_OFFSET_FILE_LENGTH 0
 101
 102 /* Offset ( in the firmware file's header ) to the file CRC */
 103 #define FIRMWARE_OFFSET_FILE_CRC 4
 104
 105 /* Offset ( in the firmware file's header ) to the real data */
 106 #define FIRMWARE_OFFSET_FILE_DATA 6
 107
 108 /* The start address index for ROM builds */
 109 /* #define ROM_START 0x11010 for behind original Archos */
 110 #define ROM_START 0x7010 /* for behind BootBox */
 111
 112 /* Software controlled LED */
 113 #define CONFIG_LED LED_VIRTUAL
 114
 115 #define CONFIG_LCD LCD_S6B33B2 /* Not sure about this... same as C200? - MarcGuay */
 116
 117 #define BOOTFILE_EXT "c100"
 118 #define BOOTFILE "rockbox." BOOTFILE_EXT
 119 #define BOOTDIR "/"
 120
 121 #endif /* SIMULATOR */