firmware/export/config-h120.h

   1 #define TARGET_TREE /* this target is using the target tree system */
   2 /*
   3  * This config file is for iriver H120 and H140
   4  */
   5 #define IRIVER_H100_SERIES 1
   6
   7 /* For Rolo and boot loader */
   8 #define MODEL_NUMBER 0
   9
  10 /* define this if you use an ATA controller */
  11 #define HAVE_ATA
  12
  13 /* define this if you have a bitmap LCD display */
  14 #define HAVE_LCD_BITMAP
  15
  16 /* define this if you want album art for this target */
  17 #define HAVE_ALBUMART
  18
  19 /* define this if you can flip your LCD */
  20 #define HAVE_LCD_FLIP
  21
  22 /* define this if you can invert the colours on your LCD */
  23 #define HAVE_LCD_INVERT
  24
  25 /* define this if you have access to the quickscreen */
  26 #define HAVE_QUICKSCREEN
  27 /* define this if you have access to the pitchscreen */
  28 #define HAVE_PITCHSCREEN
  29
  30 /* define this if you would like tagcache to build on this target */
  31 #define HAVE_TAGCACHE
  32
  33 /* LCD dimensions */
  34 #define LCD_WIDTH  160
  35 #define LCD_HEIGHT 128
  36 #define LCD_DEPTH  2
  37
  38 #define LCD_PIXELFORMAT VERTICAL_PACKING
  39
  40 /* remote LCD */
  41 #define LCD_REMOTE_WIDTH  128
  42 #define LCD_REMOTE_HEIGHT 64
  43 #define LCD_REMOTE_DEPTH  1
  44
  45 #define LCD_REMOTE_PIXELFORMAT VERTICAL_PACKING
  46
  47 #define CONFIG_KEYPAD IRIVER_H100_PAD
  48
  49 #define CONFIG_REMOTE_KEYPAD H100_REMOTE
  50
  51 /* Define this if you do software codec */
  52 #define CONFIG_CODEC SWCODEC
  53
  54 /* Define this if you have an remote lcd */
  55 #define HAVE_REMOTE_LCD
  56
  57 /* Define if we have a hardware defect that causes ticking on the audio line */
  58 #define HAVE_REMOTE_LCD_TICKING
  59
  60 #define CONFIG_LCD LCD_S1D15E06
  61
  62 /* Define this for LCD backlight available */
  63 #define HAVE_BACKLIGHT
  64
  65 /* We can fade the backlight by using PWM */
  66 #define HAVE_BACKLIGHT_PWM_FADING
  67
  68 /* Define this if you have a software controlled poweroff */
  69 #define HAVE_SW_POWEROFF
  70
  71 /* The number of bytes reserved for loadable codecs */
  72 #define CODEC_SIZE 0x80000
  73
  74 /* The number of bytes reserved for loadable plugins */
  75 #define PLUGIN_BUFFER_SIZE 0x80000
  76
  77 #define AB_REPEAT_ENABLE 1
  78
  79 #define CONFIG_TUNER TEA5767
  80 #define CONFIG_TUNER_XTAL 32768
  81
  82 #define HAVE_UDA1380
  83
  84 /* define this if you have recording possibility */
  85 #define HAVE_RECORDING
  86
  87 /* Define bitmask of input sources - recordable bitmask can be defined
  88    explicitly if different */
  89 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | \
  90                         SRC_CAP_FMRADIO | SRC_CAP_SPDIF)
  91
  92 /* define hardware samples rate caps mask */
  93 #define HW_SAMPR_CAPS   (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
  94
  95 /* define the bitmask of recording sample rates */
  96 #define REC_SAMPR_CAPS  (SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
  97
  98 #define HAVE_AGC
  99
 100 #define BATTERY_CAPACITY_DEFAULT 1300 /* default battery capacity */
 101 #define BATTERY_CAPACITY_MIN 1300 /* min. capacity selectable */
 102 #define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
 103 #define BATTERY_CAPACITY_INC 50   /* capacity increment */
 104 #define BATTERY_TYPES_COUNT  1    /* only one type */
 105
 106 /* Hardware controlled charging */
 107 //#define CONFIG_CHARGING CHARGING_SIMPLE
 108 #define CONFIG_CHARGING CHARGING_MONITOR /* FIXME: remove that once monitoring is fixed properly */
 109
 110 #ifndef SIMULATOR
 111
 112 /* Define this if you have a Motorola SCF5249 */
 113 #define CONFIG_CPU MCF5249
 114
 115 /* Define this if you want to use coldfire's i2c interface */
 116 #define CONFIG_I2C I2C_COLDFIRE
 117
 118 /* Define this if you can run rockbox from flash memory */
 119 #define HAVE_FLASHED_ROCKBOX
 120
 121 /* define this if the hardware can be powered off while charging */
 122 #define HAVE_POWEROFF_WHILE_CHARGING
 123
 124 /* The size of the flash ROM */
 125 #define FLASH_SIZE 0x200000
 126
 127 /* Define this to the CPU frequency */
 128 #define CPU_FREQ      11289600
 129
 130 /* Define this if you have ATA power-off control */
 131 #define HAVE_ATA_POWER_OFF
 132
 133 /* Offset ( in the firmware file's header ) to the file CRC */
 134 #define FIRMWARE_OFFSET_FILE_CRC 0
 135
 136 /* Offset ( in the firmware file's header ) to the real data */
 137 #define FIRMWARE_OFFSET_FILE_DATA 8
 138
 139 #define HAVE_ATA_LED_CTRL
 140
 141 /* Define this if you have adjustable CPU frequency */
 142 #define HAVE_ADJUSTABLE_CPU_FREQ
 143
 144 #define BOOTFILE_EXT "iriver"
 145 #define BOOTFILE "rockbox." BOOTFILE_EXT
 146 #define BOOTDIR "/.rockbox"
 147
 148 #define BOOTLOADER_ENTRYPOINT  0x001F0000
 149 #define FLASH_RAMIMAGE_ENTRY   0x00001000
 150 #define FLASH_ROMIMAGE_ENTRY   0x00100000
 151 #define FLASH_MAGIC            0xfbfbfbf2
 152
 153 /* Define this if there is an EEPROM chip */
 154 #define HAVE_EEPROM
 155
 156 /* Define this if the EEPROM chip is used */
 157 #define HAVE_EEPROM_SETTINGS
 158
 159 #endif /* !SIMULATOR */
 160
 161 /* Define this for S/PDIF output available */
 162 #define HAVE_SPDIF_OUT
 163
 164 /* Define this if you can control the S/PDIF power */
 165 #define HAVE_SPDIF_POWER
 166
 167 /* Define this if you have a serial port */
 168 /*#define HAVE_SERIAL*/
 169
 170 /** Port-specific settings **/
 171
 172 #define HAVE_LCD_CONTRAST
 173
 174 /* Main LCD backlight brightness range and defaults */
 175 #define MIN_CONTRAST_SETTING        14 /* White screen a bit higher than this */
 176 #define MAX_CONTRAST_SETTING        63 /* Black screen a bit lower than this */
 177 #define DEFAULT_CONTRAST_SETTING    27
 178
 179 /* Remote LCD contrast range and defaults */
 180 #define MIN_REMOTE_CONTRAST_SETTING     5
 181 #define MAX_REMOTE_CONTRAST_SETTING     63
 182 #define DEFAULT_REMOTE_CONTRAST_SETTING 42