1 /***************************************************************************
3 * Open \______ \ ____ ____ | | _\_ |__ _______ ___
4 * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
5 * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
6 * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
10 * Copyright (C) 2007 Nicolas Pennequin
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License
14 * as published by the Free Software Foundation; either version 2
15 * of the License, or (at your option) any later version.
17 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
18 * KIND, either express or implied.
20 ****************************************************************************/
27 #include "buffering.h"
45 #include "mp3_playback.h"
57 #define GUARD_BUFSIZE (32*1024)
59 #define GUARD_BUFSIZE (8*1024)
62 /* Define LOGF_ENABLE to enable logf output in this file */
63 /*#define LOGF_ENABLE*/
66 /* macros to enable logf for queues
67 logging on SYS_TIMEOUT can be disabled */
69 /* Define this for logf output of all queuing except SYS_TIMEOUT */
70 #define BUFFERING_LOGQUEUES
71 /* Define this to logf SYS_TIMEOUT messages */
72 /* #define BUFFERING_LOGQUEUES_SYS_TIMEOUT */
75 #ifdef BUFFERING_LOGQUEUES
76 #define LOGFQUEUE logf
78 #define LOGFQUEUE(...)
81 #ifdef BUFFERING_LOGQUEUES_SYS_TIMEOUT
82 #define LOGFQUEUE_SYS_TIMEOUT logf
84 #define LOGFQUEUE_SYS_TIMEOUT(...)
87 /* default point to start buffer refill */
88 #define BUFFERING_DEFAULT_WATERMARK (1024*512)
89 /* amount of data to read in one read() call */
90 #define BUFFERING_DEFAULT_FILECHUNK (1024*32)
91 /* point at which the file buffer will fight for CPU time */
92 #define BUFFERING_CRITICAL_LEVEL (1024*128)
94 #define BUF_HANDLE_MASK 0x7FFFFFFF
97 /* Ring buffer helper macros */
98 /* Buffer pointer (p) plus value (v), wrapped if necessary */
99 #define RINGBUF_ADD(p,v) (((p)+(v))<buffer_len ? (p)+(v) : (p)+(v)-buffer_len)
100 /* Buffer pointer (p) minus value (v), wrapped if necessary */
101 #define RINGBUF_SUB(p,v) ((p>=v) ? (p)-(v) : (p)+buffer_len-(v))
102 /* How far value (v) plus buffer pointer (p1) will cross buffer pointer (p2) */
103 #define RINGBUF_ADD_CROSS(p1,v,p2) \
104 ((p1<p2) ? (int)((p1)+(v))-(int)(p2) : (int)((p1)+(v)-(p2))-(int)buffer_len)
105 /* Bytes available in the buffer */
106 #define BUF_USED RINGBUF_SUB(buf_widx, buf_ridx)
108 /* assert(sizeof(struct memory_handle)%4==0) */
109 struct memory_handle
{
110 int id
; /* A unique ID for the handle */
111 enum data_type type
; /* Type of data buffered with this handle */
112 char path
[MAX_PATH
]; /* Path if data originated in a file */
113 int fd
; /* File descriptor to path (-1 if closed) */
114 size_t data
; /* Start index of the handle's data buffer */
115 volatile size_t ridx
; /* Read pointer, relative to the main buffer */
116 size_t widx
; /* Write pointer */
117 size_t filesize
; /* File total length */
118 size_t filerem
; /* Remaining bytes of file NOT in buffer */
119 volatile size_t available
; /* Available bytes to read from buffer */
120 size_t offset
; /* Offset at which we started reading the file */
121 struct memory_handle
*next
;
123 /* invariant: filesize == offset + available + filerem */
126 static char *guard_buffer
;
128 static size_t buffer_len
;
130 static volatile size_t buf_widx
; /* current writing position */
131 static volatile size_t buf_ridx
; /* current reading position */
132 /* buf_*idx are values relative to the buffer, not real pointers. */
135 static size_t conf_watermark
= 0; /* Level to trigger filebuf fill */
137 static size_t high_watermark
= 0; /* High watermark for rebuffer */
140 /* current memory handle in the linked list. NULL when the list is empty. */
141 static struct memory_handle
*cur_handle
;
142 /* first memory handle in the linked list. NULL when the list is empty. */
143 static struct memory_handle
*first_handle
;
145 static int num_handles
; /* number of handles in the list */
147 static int base_handle_id
;
149 static struct mutex llist_mutex
;
151 /* Handle cache (makes find_handle faster).
152 This is global so that move_handle and rm_handle can invalidate it. */
153 static struct memory_handle
*cached_handle
= NULL
;
156 size_t remaining
; /* Amount of data needing to be buffered */
157 size_t wasted
; /* Amount of space available for freeing */
158 size_t buffered
; /* Amount of data currently in the buffer */
159 size_t useful
; /* Amount of data still useful to the user */
163 /* Messages available to communicate with the buffering thread */
165 Q_BUFFER_HANDLE
= 1, /* Request buffering of a handle, this should not be
166 used in a low buffer situation. */
167 Q_RESET_HANDLE
, /* (internal) Request resetting of a handle to its
168 offset (the offset has to be set beforehand) */
169 Q_CLOSE_HANDLE
, /* Request closing a handle */
170 Q_BASE_HANDLE
, /* Set the reference handle for buf_useful_data */
174 Q_START_FILL
, /* Request that the buffering thread initiate a buffer
175 fill at its earliest convenience */
176 Q_HANDLE_ADDED
, /* Inform the buffering thread that a handle was added,
177 (which means the disk is spinning) */
180 /* Buffering thread */
181 static void buffering_thread(void);
182 static long buffering_stack
[(DEFAULT_STACK_SIZE
+ 0x2000)/sizeof(long)];
183 static const char buffering_thread_name
[] = "buffering";
184 static struct thread_entry
*buffering_thread_p
;
185 static struct event_queue buffering_queue
;
186 static struct queue_sender_list buffering_queue_sender_list
;
191 LINKED LIST MANAGEMENT
192 ======================
194 add_handle : Add a handle to the list
195 rm_handle : Remove a handle from the list
196 find_handle : Get a handle pointer from an ID
197 move_handle : Move a handle in the buffer (with or without its data)
199 These functions only handle the linked list structure. They don't touch the
200 contents of the struct memory_handle headers. They also change the buf_*idx
201 pointers when necessary and manage the handle IDs.
203 The first and current (== last) handle are kept track of.
204 A new handle is added at buf_widx and becomes the current one.
205 buf_widx always points to the current writing position for the current handle
206 buf_ridx always points to the location of the first handle.
207 buf_ridx == buf_widx means the buffer is empty.
211 /* Add a new handle to the linked list and return it. It will have become the
213 data_size must contain the size of what will be in the handle.
214 can_wrap tells us whether this type of data may wrap on buffer
215 alloc_all tells us if we must immediately be able to allocate data_size
216 returns a valid memory handle if all conditions for allocation are met.
217 NULL if there memory_handle itself cannot be allocated or if the
218 data_size cannot be allocated and alloc_all is set. This function's
219 only potential side effect is to allocate space for the cur_handle
222 static struct memory_handle
*add_handle(size_t data_size
, bool can_wrap
,
225 /* gives each handle a unique id */
226 static int cur_handle_id
= 0;
232 if (num_handles
>= BUF_MAX_HANDLES
)
235 mutex_lock(&llist_mutex
);
237 if (cur_handle
&& cur_handle
->filerem
> 0) {
238 /* the current handle hasn't finished buffering. We can only add
239 a new one if there is already enough free space to finish
241 size_t req
= cur_handle
->filerem
+ sizeof(struct memory_handle
);
242 if (RINGBUF_ADD_CROSS(cur_handle
->widx
, req
, buf_ridx
) >= 0) {
243 /* Not enough space */
244 mutex_unlock(&llist_mutex
);
247 /* Allocate the remainder of the space for the current handle */
248 buf_widx
= RINGBUF_ADD(cur_handle
->widx
, cur_handle
->filerem
);
252 /* align to 4 bytes up */
253 new_widx
= RINGBUF_ADD(buf_widx
, 3) & ~3;
255 len
= data_size
+ sizeof(struct memory_handle
);
257 /* First, will the handle wrap? */
258 overlap
= RINGBUF_ADD_CROSS(new_widx
, sizeof(struct memory_handle
),
260 /* If the handle would wrap, move to the beginning of the buffer,
261 * otherwise check if the data can/would wrap and move it to the
262 * beginning if needed */
265 } else if (!can_wrap
) {
266 overlap
= RINGBUF_ADD_CROSS(new_widx
, len
, buffer_len
- 1);
268 new_widx
+= data_size
- overlap
;
271 /* How far we shifted buf_widx to align things, must be < buffer_len */
272 shift
= RINGBUF_SUB(new_widx
, buf_widx
);
274 /* How much space are we short in the actual ring buffer? */
275 overlap
= RINGBUF_ADD_CROSS(buf_widx
, shift
+ len
, buf_ridx
);
276 if (overlap
>= 0 && (alloc_all
|| (unsigned)overlap
> data_size
)) {
277 /* Not enough space for required allocations */
278 mutex_unlock(&llist_mutex
);
282 /* There is enough space for the required data, advance the buf_widx and
283 * initialize the struct */
286 struct memory_handle
*new_handle
=
287 (struct memory_handle
*)(&buffer
[buf_widx
]);
289 /* only advance the buffer write index of the size of the struct */
290 buf_widx
= RINGBUF_ADD(buf_widx
, sizeof(struct memory_handle
));
292 new_handle
->id
= cur_handle_id
;
293 /* Wrap signed int is safe and 0 doesn't happen */
294 cur_handle_id
= (cur_handle_id
+ 1) & BUF_HANDLE_MASK
;
295 new_handle
->next
= NULL
;
299 /* the new handle is the first one */
300 first_handle
= new_handle
;
303 cur_handle
->next
= new_handle
;
305 cur_handle
= new_handle
;
307 mutex_unlock(&llist_mutex
);
311 /* Delete a given memory handle from the linked list
312 and return true for success. Nothing is actually erased from memory. */
313 static bool rm_handle(const struct memory_handle
*h
)
318 mutex_lock(&llist_mutex
);
320 if (h
== first_handle
) {
321 first_handle
= h
->next
;
322 if (h
== cur_handle
) {
323 /* h was the first and last handle: the buffer is now empty */
325 buf_ridx
= buf_widx
= 0;
327 /* update buf_ridx to point to the new first handle */
328 buf_ridx
= (void *)first_handle
- (void *)buffer
;
331 struct memory_handle
*m
= first_handle
;
332 /* Find the previous handle */
333 while (m
&& m
->next
!= h
) {
336 if (m
&& m
->next
== h
) {
338 if (h
== cur_handle
) {
340 buf_widx
= cur_handle
->widx
;
343 mutex_unlock(&llist_mutex
);
348 /* Invalidate the cache to prevent it from keeping the old location of h */
349 if (h
== cached_handle
)
350 cached_handle
= NULL
;
354 mutex_unlock(&llist_mutex
);
358 /* Return a pointer to the memory handle of given ID.
359 NULL if the handle wasn't found */
360 static struct memory_handle
*find_handle(int handle_id
)
365 mutex_lock(&llist_mutex
);
367 /* simple caching because most of the time the requested handle
368 will either be the same as the last, or the one after the last */
371 if (cached_handle
->id
== handle_id
) {
372 mutex_unlock(&llist_mutex
);
373 return cached_handle
;
374 } else if (cached_handle
->next
&&
375 (cached_handle
->next
->id
== handle_id
)) {
376 cached_handle
= cached_handle
->next
;
377 mutex_unlock(&llist_mutex
);
378 return cached_handle
;
382 struct memory_handle
*m
= first_handle
;
383 while (m
&& m
->id
!= handle_id
) {
386 /* This condition can only be reached with !m or m->id == handle_id */
390 mutex_unlock(&llist_mutex
);
394 /* Move a memory handle and data_size of its data delta bytes along the buffer.
395 delta maximum bytes available to move the handle. If the move is performed
396 it is set to the actual distance moved.
397 data_size is the amount of data to move along with the struct.
398 returns a valid memory_handle if the move is successful
399 NULL if the handle is NULL, the move would be less than the size of
400 a memory_handle after correcting for wraps or if the handle is not
401 found in the linked list for adjustment. This function has no side
402 effects if NULL is returned. */
403 static bool move_handle(struct memory_handle
**h
, size_t *delta
,
404 size_t data_size
, bool can_wrap
)
406 struct memory_handle
*dest
;
407 const struct memory_handle
*src
;
410 size_t final_delta
= *delta
;
413 if (h
== NULL
|| (src
= *h
) == NULL
)
416 size_to_move
= sizeof(struct memory_handle
) + data_size
;
418 /* Align to four bytes, down */
420 if (final_delta
< sizeof(struct memory_handle
)) {
421 /* It's not legal to move less than the size of the struct */
425 mutex_lock(&llist_mutex
);
427 newpos
= RINGBUF_ADD((void *)src
- (void *)buffer
, final_delta
);
428 overlap
= RINGBUF_ADD_CROSS(newpos
, size_to_move
, buffer_len
- 1);
431 /* Some part of the struct + data would wrap, maybe ok */
432 size_t correction
= 0;
433 /* If the overlap lands inside the memory_handle */
434 if ((unsigned)overlap
> data_size
) {
435 /* Correct the position and real delta to prevent the struct from
436 * wrapping, this guarantees an aligned delta, I think */
437 correction
= overlap
- data_size
;
438 } else if (!can_wrap
) {
439 /* Otherwise the overlap falls in the data area and must all be
440 * backed out. This may become conditional if ever we move
441 * data that is allowed to wrap (ie audio) */
442 correction
= overlap
;
443 /* Align correction to four bytes, up */
444 correction
= (correction
+3) & ~3;
447 if (final_delta
< correction
+ sizeof(struct memory_handle
)) {
448 /* Delta cannot end up less than the size of the struct */
449 mutex_unlock(&llist_mutex
);
453 newpos
-= correction
;
454 overlap
-= correction
;/* Used below to know how to split the data */
455 final_delta
-= correction
;
459 dest
= (struct memory_handle
*)(&buffer
[newpos
]);
461 if (src
== first_handle
) {
465 struct memory_handle
*m
= first_handle
;
466 while (m
&& m
->next
!= src
) {
469 if (m
&& m
->next
== src
) {
472 mutex_unlock(&llist_mutex
);
478 /* Update the cache to prevent it from keeping the old location of h */
479 if (src
== cached_handle
)
480 cached_handle
= dest
;
482 /* the cur_handle pointer might need updating */
483 if (src
== cur_handle
)
487 size_t first_part
= size_to_move
- overlap
;
488 memmove(dest
, src
, first_part
);
489 memmove(buffer
, (const char *)src
+ first_part
, overlap
);
491 memmove(dest
, src
, size_to_move
);
494 /* Update the caller with the new location of h and the distance moved */
496 *delta
= final_delta
;
497 mutex_unlock(&llist_mutex
);
503 BUFFER SPACE MANAGEMENT
504 =======================
506 update_data_counters: Updates the values in data_counters
507 buffer_is_low : Returns true if the amount of useful data in the buffer is low
508 buffer_handle : Buffer data for a handle
509 reset_handle : Reset write position and data buffer of a handle to its offset
510 rebuffer_handle : Seek to a nonbuffered part of a handle by rebuffering the data
511 shrink_handle : Free buffer space by moving a handle
512 fill_buffer : Call buffer_handle for all handles that have data to buffer
514 These functions are used by the buffering thread to manage buffer space.
517 static void update_data_counters(void)
519 struct memory_handle
*m
= find_handle(base_handle_id
);
520 bool is_useful
= m
==NULL
;
524 size_t remaining
= 0;
527 mutex_lock(&llist_mutex
);
531 buffered
+= m
->available
;
532 wasted
+= RINGBUF_SUB(m
->ridx
, m
->data
);
533 remaining
+= m
->filerem
;
535 if (m
->id
== base_handle_id
)
539 useful
+= RINGBUF_SUB(m
->widx
, m
->ridx
);
544 mutex_unlock(&llist_mutex
);
546 data_counters
.buffered
= buffered
;
547 data_counters
.wasted
= wasted
;
548 data_counters
.remaining
= remaining
;
549 data_counters
.useful
= useful
;
552 static inline bool buffer_is_low(void)
554 update_data_counters();
555 return data_counters
.useful
< BUFFERING_CRITICAL_LEVEL
;
558 /* Buffer data for the given handle.
559 Return whether or not the buffering should continue explicitly. */
560 static bool buffer_handle(int handle_id
)
562 logf("buffer_handle(%d)", handle_id
);
563 struct memory_handle
*h
= find_handle(handle_id
);
567 if (h
->filerem
== 0) {
568 /* nothing left to buffer */
572 if (h
->fd
< 0) /* file closed, reopen */
575 h
->fd
= open(h
->path
, O_RDONLY
);
579 /* could not open the file, truncate it where it is */
580 h
->filesize
-= h
->filerem
;
586 lseek(h
->fd
, h
->offset
, SEEK_SET
);
591 if (h
->type
== TYPE_ID3
)
593 if (!get_metadata((struct mp3entry
*)(buffer
+ h
->data
), h
->fd
, h
->path
))
595 /* metadata parsing failed: clear the buffer. */
596 memset(buffer
+ h
->data
, 0, sizeof(struct mp3entry
));
601 h
->available
= sizeof(struct mp3entry
);
602 h
->widx
+= sizeof(struct mp3entry
);
603 send_event(EVENT_HANDLE_FINISHED
, &h
->id
);
607 while (h
->filerem
> 0)
609 /* max amount to copy */
610 size_t copy_n
= MIN( MIN(h
->filerem
, BUFFERING_DEFAULT_FILECHUNK
),
611 buffer_len
- h
->widx
);
613 /* stop copying if it would overwrite the reading position */
614 if (RINGBUF_ADD_CROSS(h
->widx
, copy_n
, buf_ridx
) >= 0)
617 /* This would read into the next handle, this is broken */
618 if (h
->next
&& RINGBUF_ADD_CROSS(h
->widx
, copy_n
,
619 (unsigned)((void *)h
->next
- (void *)buffer
)) > 0) {
620 /* Try to recover by truncating this file */
621 copy_n
= RINGBUF_ADD_CROSS(h
->widx
, copy_n
,
622 (unsigned)((void *)h
->next
- (void *)buffer
));
623 h
->filerem
-= copy_n
;
624 h
->filesize
-= copy_n
;
625 logf("buf alloc short %ld", (long)copy_n
);
632 /* rc is the actual amount read */
633 int rc
= read(h
->fd
, &buffer
[h
->widx
], copy_n
);
637 /* Some kind of filesystem error, maybe recoverable if not codec */
638 if (h
->type
== TYPE_CODEC
) {
639 logf("Partial codec");
643 DEBUGF("File ended %ld bytes early\n", (long)h
->filerem
);
644 h
->filesize
-= h
->filerem
;
650 h
->widx
= RINGBUF_ADD(h
->widx
, rc
);
656 /* If this is a large file, see if we need to break or give the codec
658 if (h
->type
== TYPE_PACKET_AUDIO
&&
659 pcmbuf_is_lowdata() && !buffer_is_low())
668 if (!queue_empty(&buffering_queue
))
672 if (h
->filerem
== 0) {
673 /* finished buffering the file */
676 send_event(EVENT_HANDLE_FINISHED
, &h
->id
);
682 /* Reset writing position and data buffer of a handle to its current offset.
683 Use this after having set the new offset to use. */
684 static void reset_handle(int handle_id
)
686 logf("reset_handle(%d)", handle_id
);
688 struct memory_handle
*h
= find_handle(handle_id
);
696 h
->filerem
= h
->filesize
- h
->offset
;
699 lseek(h
->fd
, h
->offset
, SEEK_SET
);
703 /* Seek to a nonbuffered part of a handle by rebuffering the data. */
704 static void rebuffer_handle(int handle_id
, size_t newpos
)
706 struct memory_handle
*h
= find_handle(handle_id
);
710 /* When seeking foward off of the buffer, if it is a short seek don't
711 rebuffer the whole track, just read enough to satisfy */
712 if (newpos
> h
->offset
&& newpos
- h
->offset
< BUFFERING_DEFAULT_FILECHUNK
)
714 LOGFQUEUE("buffering >| Q_BUFFER_HANDLE");
715 queue_send(&buffering_queue
, Q_BUFFER_HANDLE
, handle_id
);
716 h
->ridx
= h
->data
+ newpos
;
722 /* Reset the handle to its new offset */
723 LOGFQUEUE("buffering >| Q_RESET_HANDLE");
724 queue_send(&buffering_queue
, Q_RESET_HANDLE
, handle_id
);
726 size_t next
= (unsigned)((void *)h
->next
- (void *)buffer
);
727 if (next
- h
->data
< h
->filesize
- newpos
)
729 /* There isn't enough space to rebuffer all of the track from its new
730 offset, so we ask the user to free some */
731 DEBUGF("rebuffer_handle: space is needed\n");
732 send_event(EVENT_HANDLE_REBUFFER
, &handle_id
);
735 /* Now we ask for a rebuffer */
736 LOGFQUEUE("buffering >| Q_BUFFER_HANDLE");
737 queue_send(&buffering_queue
, Q_BUFFER_HANDLE
, handle_id
);
742 static bool close_handle(int handle_id
)
744 struct memory_handle
*h
= find_handle(handle_id
);
746 /* If the handle is not found, it is closed */
755 /* rm_handle returns true unless the handle somehow persists after exit */
759 /* Free buffer space by moving the handle struct right before the useful
760 part of its data buffer or by moving all the data. */
761 static void shrink_handle(struct memory_handle
*h
)
768 if (h
->next
&& h
->filerem
== 0 &&
769 (h
->type
== TYPE_ID3
|| h
->type
== TYPE_CUESHEET
||
770 h
->type
== TYPE_BITMAP
|| h
->type
== TYPE_CODEC
||
771 h
->type
== TYPE_ATOMIC_AUDIO
))
773 /* metadata handle: we can move all of it */
774 size_t handle_distance
=
775 RINGBUF_SUB((unsigned)((void *)h
->next
- (void*)buffer
), h
->data
);
776 delta
= handle_distance
- h
->available
;
778 /* The value of delta might change for alignment reasons */
779 if (!move_handle(&h
, &delta
, h
->available
, h
->type
==TYPE_CODEC
))
782 size_t olddata
= h
->data
;
783 h
->data
= RINGBUF_ADD(h
->data
, delta
);
784 h
->ridx
= RINGBUF_ADD(h
->ridx
, delta
);
785 h
->widx
= RINGBUF_ADD(h
->widx
, delta
);
787 if (h
->type
== TYPE_ID3
&& h
->filesize
== sizeof(struct mp3entry
)) {
788 /* when moving an mp3entry we need to readjust its pointers. */
789 adjust_mp3entry((struct mp3entry
*)&buffer
[h
->data
],
790 (void *)&buffer
[h
->data
],
791 (const void *)&buffer
[olddata
]);
792 } else if (h
->type
== TYPE_BITMAP
) {
793 /* adjust the bitmap's pointer */
794 struct bitmap
*bmp
= (struct bitmap
*)&buffer
[h
->data
];
795 bmp
->data
= &buffer
[h
->data
+ sizeof(struct bitmap
)];
800 /* only move the handle struct */
801 delta
= RINGBUF_SUB(h
->ridx
, h
->data
);
802 if (!move_handle(&h
, &delta
, 0, true))
805 h
->data
= RINGBUF_ADD(h
->data
, delta
);
806 h
->available
-= delta
;
811 /* Fill the buffer by buffering as much data as possible for handles that still
812 have data left to buffer
813 Return whether or not to continue filling after this */
814 static bool fill_buffer(void)
816 logf("fill_buffer()");
817 struct memory_handle
*m
= first_handle
;
819 while (queue_empty(&buffering_queue
) && m
) {
820 if (m
->filerem
> 0) {
821 if (!buffer_handle(m
->id
)) {
834 /* only spin the disk down if the filling wasn't interrupted by an
835 event arriving in the queue. */
842 /* Given a file descriptor to a bitmap file, write the bitmap data to the
843 buffer, with a struct bitmap and the actual data immediately following.
844 Return value is the total size (struct + data). */
845 static int load_bitmap(int fd
)
848 struct bitmap
*bmp
= (struct bitmap
*)&buffer
[buf_widx
];
849 /* FIXME: alignment may be needed for the data buffer. */
850 bmp
->data
= &buffer
[buf_widx
+ sizeof(struct bitmap
)];
852 #if (LCD_DEPTH > 1) || defined(HAVE_REMOTE_LCD) && (LCD_REMOTE_DEPTH > 1)
853 bmp
->maskdata
= NULL
;
856 int free
= (int)MIN(buffer_len
- BUF_USED
, buffer_len
- buf_widx
);
857 rc
= read_bmp_fd(fd
, bmp
, free
, FORMAT_ANY
|FORMAT_DITHER
);
858 return rc
+ (rc
> 0 ? sizeof(struct bitmap
) : 0);
864 MAIN BUFFERING API CALLS
865 ========================
867 bufopen : Request the opening of a new handle for a file
868 bufalloc : Open a new handle for data other than a file.
869 bufclose : Close an open handle
870 bufseek : Set the read pointer in a handle
871 bufadvance : Move the read pointer in a handle
872 bufread : Copy data from a handle into a given buffer
873 bufgetdata : Give a pointer to the handle's data
875 These functions are exported, to allow interaction with the buffer.
876 They take care of the content of the structs, and rely on the linked list
877 management functions for all the actual handle management work.
881 /* Reserve space in the buffer for a file.
882 filename: name of the file to open
883 offset: offset at which to start buffering the file, useful when the first
884 (offset-1) bytes of the file aren't needed.
885 return value: <0 if the file cannot be opened, or one file already
886 queued to be opened, otherwise the handle for the file in the buffer
888 int bufopen(const char *file
, size_t offset
, enum data_type type
)
890 if (type
== TYPE_ID3
)
892 /* ID3 case: allocate space, init the handle and return. */
894 struct memory_handle
*h
= add_handle(sizeof(struct mp3entry
), false, true);
896 return ERR_BUFFER_FULL
;
899 h
->filesize
= sizeof(struct mp3entry
);
900 h
->filerem
= sizeof(struct mp3entry
);
907 strncpy(h
->path
, file
, MAX_PATH
);
909 buf_widx
+= sizeof(struct mp3entry
); /* safe because the handle
914 /* Other cases: there is a little more work. */
916 int fd
= open(file
, O_RDONLY
);
918 return ERR_FILE_ERROR
;
920 size_t size
= filesize(fd
);
921 bool can_wrap
= type
==TYPE_PACKET_AUDIO
|| type
==TYPE_CODEC
;
923 size_t adjusted_offset
= offset
;
924 if (adjusted_offset
> size
)
927 struct memory_handle
*h
= add_handle(size
-adjusted_offset
, can_wrap
, false);
930 DEBUGF("bufopen: failed to add handle\n");
932 return ERR_BUFFER_FULL
;
935 strncpy(h
->path
, file
, MAX_PATH
);
936 h
->offset
= adjusted_offset
;
942 if (type
== TYPE_BITMAP
)
944 /* Bitmap file: we load the data instead of the file */
946 mutex_lock(&llist_mutex
); /* Lock because load_bitmap yields */
947 rc
= load_bitmap(fd
);
952 mutex_unlock(&llist_mutex
);
953 return ERR_FILE_ERROR
;
958 h
->widx
= buf_widx
+ rc
; /* safe because the data doesn't wrap */
959 buf_widx
+= rc
; /* safe too */
960 mutex_unlock(&llist_mutex
);
965 h
->filerem
= size
- adjusted_offset
;
971 if (type
== TYPE_CUESHEET
) {
973 /* Immediately start buffering those */
974 LOGFQUEUE("buffering >| Q_BUFFER_HANDLE");
975 queue_send(&buffering_queue
, Q_BUFFER_HANDLE
, h
->id
);
977 /* Other types will get buffered in the course of normal operations */
981 /* Inform the buffering thread that we added a handle */
982 LOGFQUEUE("buffering > Q_HANDLE_ADDED %d", h
->id
);
983 queue_post(&buffering_queue
, Q_HANDLE_ADDED
, h
->id
);
986 logf("bufopen: new hdl %d", h
->id
);
990 /* Open a new handle from data that needs to be copied from memory.
991 src is the source buffer from which to copy data. It can be NULL to simply
992 reserve buffer space.
993 size is the requested size. The call will only be successful if the
994 requested amount of data can entirely fit in the buffer without wrapping.
995 Return value is the handle id for success or <0 for failure.
997 int bufalloc(const void *src
, size_t size
, enum data_type type
)
999 struct memory_handle
*h
= add_handle(size
, false, true);
1002 return ERR_BUFFER_FULL
;
1005 if (type
== TYPE_ID3
&& size
== sizeof(struct mp3entry
)) {
1006 /* specially take care of struct mp3entry */
1007 copy_mp3entry((struct mp3entry
*)&buffer
[buf_widx
],
1008 (const struct mp3entry
*)src
);
1010 memcpy(&buffer
[buf_widx
], src
, size
);
1020 h
->widx
= buf_widx
+ size
; /* this is safe because the data doesn't wrap */
1022 h
->available
= size
;
1025 buf_widx
+= size
; /* safe too */
1027 logf("bufalloc: new hdl %d", h
->id
);
1031 /* Close the handle. Return true for success and false for failure */
1032 bool bufclose(int handle_id
)
1034 logf("bufclose(%d)", handle_id
);
1036 LOGFQUEUE("buffering >| Q_CLOSE_HANDLE %d", handle_id
);
1037 return queue_send(&buffering_queue
, Q_CLOSE_HANDLE
, handle_id
);
1040 /* Set reading index in handle (relatively to the start of the file).
1041 Access before the available data will trigger a rebuffer.
1042 Return 0 for success and < 0 for failure:
1043 -1 if the handle wasn't found
1044 -2 if the new requested position was beyond the end of the file
1046 int bufseek(int handle_id
, size_t newpos
)
1048 struct memory_handle
*h
= find_handle(handle_id
);
1050 return ERR_HANDLE_NOT_FOUND
;
1052 if (newpos
> h
->filesize
) {
1053 /* access beyond the end of the file */
1054 return ERR_INVALID_VALUE
;
1056 else if (newpos
< h
->offset
|| h
->offset
+ h
->available
< newpos
) {
1057 /* access before or after buffered data. A rebuffer is needed. */
1058 rebuffer_handle(handle_id
, newpos
);
1061 h
->ridx
= RINGBUF_ADD(h
->data
, newpos
- h
->offset
);
1066 /* Advance the reading index in a handle (relatively to its current position).
1067 Return 0 for success and < 0 for failure */
1068 int bufadvance(int handle_id
, off_t offset
)
1070 const struct memory_handle
*h
= find_handle(handle_id
);
1072 return ERR_HANDLE_NOT_FOUND
;
1074 size_t newpos
= h
->offset
+ RINGBUF_SUB(h
->ridx
, h
->data
) + offset
;
1075 return bufseek(handle_id
, newpos
);
1078 /* Used by bufread and bufgetdata to prepare the buffer and retrieve the
1079 * actual amount of data available for reading. This function explicitly
1080 * does not check the validity of the input handle. It does do range checks
1081 * on size and returns a valid (and explicit) amount of data for reading */
1082 static struct memory_handle
*prep_bufdata(int handle_id
, size_t *size
,
1083 bool guardbuf_limit
)
1085 struct memory_handle
*h
= find_handle(handle_id
);
1089 size_t avail
= RINGBUF_SUB(h
->widx
, h
->ridx
);
1091 if (avail
== 0 && h
->filerem
== 0)
1093 /* File is finished reading */
1098 if (*size
== 0 || *size
> avail
+ h
->filerem
)
1099 *size
= avail
+ h
->filerem
;
1101 if (guardbuf_limit
&& h
->type
== TYPE_PACKET_AUDIO
&& *size
> GUARD_BUFSIZE
)
1103 logf("data request > guardbuf");
1104 /* If more than the size of the guardbuf is requested and this is a
1105 * bufgetdata, limit to guard_bufsize over the end of the buffer */
1106 *size
= MIN(*size
, buffer_len
- h
->ridx
+ GUARD_BUFSIZE
);
1107 /* this ensures *size <= buffer_len - h->ridx + GUARD_BUFSIZE */
1110 if (h
->filerem
> 0 && avail
< *size
)
1112 /* Data isn't ready. Request buffering */
1113 buf_request_buffer_handle(handle_id
);
1114 /* Wait for the data to be ready */
1118 /* it is not safe for a non-buffering thread to sleep while
1119 * holding a handle */
1120 h
= find_handle(handle_id
);
1123 avail
= RINGBUF_SUB(h
->widx
, h
->ridx
);
1125 while (h
->filerem
> 0 && avail
< *size
);
1128 *size
= MIN(*size
,avail
);
1132 /* Copy data from the given handle to the dest buffer.
1133 Return the number of bytes copied or < 0 for failure (handle not found).
1134 The caller is blocked until the requested amount of data is available.
1136 ssize_t
bufread(int handle_id
, size_t size
, void *dest
)
1138 const struct memory_handle
*h
;
1139 size_t adjusted_size
= size
;
1141 h
= prep_bufdata(handle_id
, &adjusted_size
, false);
1143 return ERR_HANDLE_NOT_FOUND
;
1145 if (h
->ridx
+ adjusted_size
> buffer_len
)
1147 /* the data wraps around the end of the buffer */
1148 size_t read
= buffer_len
- h
->ridx
;
1149 memcpy(dest
, &buffer
[h
->ridx
], read
);
1150 memcpy(dest
+read
, buffer
, adjusted_size
- read
);
1154 memcpy(dest
, &buffer
[h
->ridx
], adjusted_size
);
1157 return adjusted_size
;
1160 /* Update the "data" pointer to make the handle's data available to the caller.
1161 Return the length of the available linear data or < 0 for failure (handle
1163 The caller is blocked until the requested amount of data is available.
1164 size is the amount of linear data requested. it can be 0 to get as
1166 The guard buffer may be used to provide the requested size. This means it's
1167 unsafe to request more than the size of the guard buffer.
1169 ssize_t
bufgetdata(int handle_id
, size_t size
, void **data
)
1171 const struct memory_handle
*h
;
1172 size_t adjusted_size
= size
;
1174 h
= prep_bufdata(handle_id
, &adjusted_size
, true);
1176 return ERR_HANDLE_NOT_FOUND
;
1178 if (h
->ridx
+ adjusted_size
> buffer_len
)
1180 /* the data wraps around the end of the buffer :
1181 use the guard buffer to provide the requested amount of data. */
1182 size_t copy_n
= h
->ridx
+ adjusted_size
- buffer_len
;
1183 /* prep_bufdata ensures adjusted_size <= buffer_len - h->ridx + GUARD_BUFSIZE,
1184 so copy_n <= GUARD_BUFSIZE */
1185 memcpy(guard_buffer
, (const unsigned char *)buffer
, copy_n
);
1189 *data
= &buffer
[h
->ridx
];
1191 return adjusted_size
;
1194 ssize_t
bufgettail(int handle_id
, size_t size
, void **data
)
1198 const struct memory_handle
*h
;
1200 h
= find_handle(handle_id
);
1203 return ERR_HANDLE_NOT_FOUND
;
1206 return ERR_HANDLE_NOT_DONE
;
1208 /* We don't support tail requests of > guardbuf_size, for simplicity */
1209 if (size
> GUARD_BUFSIZE
)
1210 return ERR_INVALID_VALUE
;
1212 tidx
= RINGBUF_SUB(h
->widx
, size
);
1214 if (tidx
+ size
> buffer_len
)
1216 size_t copy_n
= tidx
+ size
- buffer_len
;
1217 memcpy(guard_buffer
, (const unsigned char *)buffer
, copy_n
);
1220 *data
= &buffer
[tidx
];
1224 ssize_t
bufcuttail(int handle_id
, size_t size
)
1226 struct memory_handle
*h
;
1227 size_t adjusted_size
= size
;
1229 h
= find_handle(handle_id
);
1232 return ERR_HANDLE_NOT_FOUND
;
1235 return ERR_HANDLE_NOT_DONE
;
1237 if (h
->available
< adjusted_size
)
1238 adjusted_size
= h
->available
;
1240 h
->available
-= adjusted_size
;
1241 h
->filesize
-= adjusted_size
;
1242 h
->widx
= RINGBUF_SUB(h
->widx
, adjusted_size
);
1243 if (h
== cur_handle
)
1246 return adjusted_size
;
1251 SECONDARY EXPORTED FUNCTIONS
1252 ============================
1256 buf_request_buffer_handle
1259 register_buffering_callback
1260 unregister_buffering_callback
1262 These functions are exported, to allow interaction with the buffer.
1263 They take care of the content of the structs, and rely on the linked list
1264 management functions for all the actual handle management work.
1267 /* Get a handle offset from a pointer */
1268 ssize_t
buf_get_offset(int handle_id
, void *ptr
)
1270 const struct memory_handle
*h
= find_handle(handle_id
);
1272 return ERR_HANDLE_NOT_FOUND
;
1274 return (size_t)ptr
- (size_t)&buffer
[h
->ridx
];
1277 ssize_t
buf_handle_offset(int handle_id
)
1279 const struct memory_handle
*h
= find_handle(handle_id
);
1281 return ERR_HANDLE_NOT_FOUND
;
1285 void buf_request_buffer_handle(int handle_id
)
1287 LOGFQUEUE("buffering >| Q_START_FILL %d",handle_id
);
1288 queue_send(&buffering_queue
, Q_START_FILL
, handle_id
);
1291 void buf_set_base_handle(int handle_id
)
1293 LOGFQUEUE("buffering > Q_BASE_HANDLE %d", handle_id
);
1294 queue_post(&buffering_queue
, Q_BASE_HANDLE
, handle_id
);
1297 /* Return the amount of buffer space used */
1298 size_t buf_used(void)
1303 void buf_set_watermark(size_t bytes
)
1305 LOGFQUEUE("buffering > Q_SET_WATERMARK %ld", (long)bytes
);
1306 queue_post(&buffering_queue
, Q_SET_WATERMARK
, bytes
);
1309 static void shrink_buffer_inner(struct memory_handle
*h
)
1314 shrink_buffer_inner(h
->next
);
1319 static void shrink_buffer(void)
1321 logf("shrink_buffer()");
1322 shrink_buffer_inner(first_handle
);
1325 void buffering_thread(void)
1327 bool filling
= false;
1328 struct queue_event ev
;
1336 queue_wait_w_tmo(&buffering_queue
, &ev
, filling
? 5 : HZ
/2);
1341 LOGFQUEUE("buffering < Q_START_FILL");
1342 /* Call buffer callbacks here because this is one of two ways
1343 * to begin a full buffer fill */
1344 send_event(EVENT_BUFFER_LOW
, 0);
1346 queue_reply(&buffering_queue
, 1);
1347 filling
|= buffer_handle((int)ev
.data
);
1350 case Q_BUFFER_HANDLE
:
1351 LOGFQUEUE("buffering < Q_BUFFER_HANDLE");
1352 queue_reply(&buffering_queue
, 1);
1353 buffer_handle((int)ev
.data
);
1356 case Q_RESET_HANDLE
:
1357 LOGFQUEUE("buffering < Q_RESET_HANDLE");
1358 queue_reply(&buffering_queue
, 1);
1359 reset_handle((int)ev
.data
);
1362 case Q_CLOSE_HANDLE
:
1363 LOGFQUEUE("buffering < Q_CLOSE_HANDLE");
1364 queue_reply(&buffering_queue
, close_handle((int)ev
.data
));
1367 case Q_HANDLE_ADDED
:
1368 LOGFQUEUE("buffering < Q_HANDLE_ADDED %d", (int)ev
.data
);
1369 /* A handle was added: the disk is spinning, so we can fill */
1374 LOGFQUEUE("buffering < Q_BASE_HANDLE");
1375 base_handle_id
= (int)ev
.data
;
1378 case Q_SET_WATERMARK
:
1379 LOGFQUEUE("buffering < Q_SET_WATERMARK");
1380 conf_watermark
= (size_t)ev
.data
;
1381 if (conf_watermark
< BUFFERING_DEFAULT_FILECHUNK
)
1383 logf("wmark<chunk %ld<%d",
1384 (long)conf_watermark
, BUFFERING_DEFAULT_FILECHUNK
);
1385 conf_watermark
= BUFFERING_DEFAULT_FILECHUNK
;
1390 case SYS_USB_CONNECTED
:
1391 LOGFQUEUE("buffering < SYS_USB_CONNECTED");
1392 usb_acknowledge(SYS_USB_CONNECTED_ACK
);
1393 usb_wait_for_disconnect(&buffering_queue
);
1398 LOGFQUEUE_SYS_TIMEOUT("buffering < SYS_TIMEOUT");
1402 update_data_counters();
1404 /* If the buffer is low, call the callbacks to get new data */
1405 if (num_handles
> 0 && data_counters
.useful
<= conf_watermark
)
1406 send_event(EVENT_BUFFER_LOW
, 0);
1409 /* TODO: This needs to be fixed to use the idle callback, disable it
1410 * for simplicity until its done right */
1412 /* If the disk is spinning, take advantage by filling the buffer */
1413 else if (ata_disk_is_active() && queue_empty(&buffering_queue
))
1415 if (num_handles
> 0 && data_counters
.useful
<= high_watermark
)
1416 send_event(EVENT_BUFFER_LOW
, 0);
1418 if (data_counters
.remaining
> 0 && BUF_USED
<= high_watermark
)
1420 /* This is a new fill, shrink the buffer up first */
1423 filling
= fill_buffer();
1424 update_data_counters();
1430 if (queue_empty(&buffering_queue
)) {
1432 if (data_counters
.remaining
> 0 && BUF_USED
< buffer_len
)
1433 filling
= fill_buffer();
1435 else if (ev
.id
== SYS_TIMEOUT
)
1437 if (data_counters
.remaining
> 0 &&
1438 data_counters
.useful
<= conf_watermark
) {
1440 filling
= fill_buffer();
1447 void buffering_init(void)
1449 mutex_init(&llist_mutex
);
1450 #ifdef HAVE_PRIORITY_SCHEDULING
1451 /* This behavior not safe atm */
1452 mutex_set_preempt(&llist_mutex
, false);
1455 conf_watermark
= BUFFERING_DEFAULT_WATERMARK
;
1457 queue_init(&buffering_queue
, true);
1458 buffering_thread_p
= create_thread( buffering_thread
, buffering_stack
,
1459 sizeof(buffering_stack
), CREATE_THREAD_FROZEN
,
1460 buffering_thread_name
IF_PRIO(, PRIORITY_BUFFERING
)
1463 queue_enable_queue_send(&buffering_queue
, &buffering_queue_sender_list
,
1464 buffering_thread_p
);
1467 /* Initialise the buffering subsystem */
1468 bool buffering_reset(char *buf
, size_t buflen
)
1470 if (!buf
|| !buflen
)
1474 buffer_len
= buflen
;
1475 guard_buffer
= buf
+ buflen
;
1480 first_handle
= NULL
;
1482 cached_handle
= NULL
;
1484 base_handle_id
= -1;
1486 /* Set the high watermark as 75% full...or 25% empty :) */
1488 high_watermark
= 3*buflen
/ 4;
1491 thread_thaw(buffering_thread_p
);
1496 void buffering_get_debugdata(struct buffering_debug
*dbgdata
)
1498 update_data_counters();
1499 dbgdata
->num_handles
= num_handles
;
1500 dbgdata
->data_rem
= data_counters
.remaining
;
1501 dbgdata
->wasted_space
= data_counters
.wasted
;
1502 dbgdata
->buffered_data
= data_counters
.buffered
;
1503 dbgdata
->useful_data
= data_counters
.useful
;