firmware/export/config-sa9200.h

   1 /*
   2  * This config file is for the Philips GoGear SA9200
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 /* For Rolo and boot loader */
   7 #define MODEL_NUMBER 26
   8 #define MODEL_NAME   "Philips GoGear SA200"
   9
  10 #define HW_SAMPR_CAPS       (SAMPR_CAP_44)
  11
  12 /* define this if you have a bitmap LCD display */
  13 #define HAVE_LCD_BITMAP
  14
  15 /* define this if you have a colour LCD */
  16 #define HAVE_LCD_COLOR
  17
  18 /* define this if you want album art for this target */
  19 #define HAVE_ALBUMART
  20
  21 /* define this if you have a light associated with the buttons */
  22 #define HAVE_BUTTON_LIGHT
  23
  24 /* define this if you have access to the quickscreen */
  25 #define HAVE_QUICKSCREEN
  26
  27 /* define this if you have access to the pitchscreen */
  28 #define HAVE_PITCHSCREEN
  29
  30 /* define this if you would like tagcache to build on this target */
  31 #define HAVE_TAGCACHE
  32
  33 /* LCD dimensions */
  34 #define LCD_WIDTH  128
  35 #define LCD_HEIGHT 160
  36 #define LCD_DEPTH  16   /* 65536 colours */
  37 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
  38
  39 /* define this if you have LCD enable function */
  40 /* #define HAVE_LCD_ENABLE */
  41
  42 /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
  43    should be defined as well. */
  44 /* #define HAVE_LCD_SLEEP */
  45
  46 /* define this if you can flip your LCD */
  47 /* #define HAVE_LCD_FLIP */
  48
  49 /* define this if you can invert the colours on your LCD */
  50 /* #define HAVE_LCD_INVERT */
  51
  52 /* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
  53
  54 #define CONFIG_KEYPAD PHILIPS_SA9200_PAD
  55
  56 /* Define this if you do software codec */
  57 #define CONFIG_CODEC SWCODEC
  58
  59 /* There is no hardware tone control */
  60 #define HAVE_SW_TONE_CONTROLS
  61
  62 /* The PP5024 has a built-in AustriaMicrosystems AS3514 */
  63 #define HAVE_AS3514
  64
  65 /* define this if you have a real-time clock */
  66 #ifndef BOOTLOADER
  67 #define CONFIG_RTC RTC_AS3514
  68 #endif
  69
  70 /* Define this if you have a software controlled poweroff */
  71 #define HAVE_SW_POWEROFF
  72
  73 /* Some Sansa E200s seem to be FAT16 formatted */
  74 #define HAVE_FAT16SUPPORT
  75
  76 /* The number of bytes reserved for loadable codecs */
  77 #define CODEC_SIZE 0x80000
  78
  79 /* The number of bytes reserved for loadable plugins */
  80 #define PLUGIN_BUFFER_SIZE 0x80000
  81
  82 #define AB_REPEAT_ENABLE 1
  83
  84 /* Define this for LCD backlight available */
  85 #define HAVE_BACKLIGHT
  86 #define HAVE_BACKLIGHT_BRIGHTNESS
  87
  88 /* Main LCD backlight brightness range and defaults */
  89 #define MIN_BRIGHTNESS_SETTING      1
  90 #define MAX_BRIGHTNESS_SETTING     12
  91 #define DEFAULT_BRIGHTNESS_SETTING  6
  92
  93 /* define this if you have a flash memory storage */
  94 #define HAVE_FLASH_STORAGE
  95
  96 /* define this if the flash memory uses the SecureDigital Memory Card protocol */
  97 #define HAVE_ATA_SD
  98
  99 #define BATTERY_CAPACITY_DEFAULT 750    /* default battery capacity */
 100 #define BATTERY_CAPACITY_MIN 750        /* min. capacity selectable */
 101 #define BATTERY_CAPACITY_MAX 750        /* max. capacity selectable */
 102 #define BATTERY_CAPACITY_INC 0          /* capacity increment */
 103 #define BATTERY_TYPES_COUNT  1          /* only one type */
 104
 105 /* Hardware controlled charging? FIXME */
 106 #define CONFIG_CHARGING CHARGING_SIMPLE
 107
 108 /* define this if the unit can be powered or charged via USB */
 109 #define HAVE_USB_POWER
 110
 111 /** Non-simulator section **/
 112 #ifndef SIMULATOR
 113
 114 /* Define this if you have a PortalPlayer PP5024 */
 115 #define CONFIG_CPU PP5024
 116
 117 /* Define this if you want to use the PP5024 i2c interface */
 118 #define CONFIG_I2C I2C_PP5024
 119
 120 /* define this if the hardware can be powered off while charging */
 121 /* Sansa can't be powered off while charging */
 122 /* #define HAVE_POWEROFF_WHILE_CHARGING */
 123
 124 /* The start address index for ROM builds */
 125 #define ROM_START 0x00000000
 126
 127 /* Define this to the CPU frequency */
 128 #define CPU_FREQ 75000000
 129
 130 /* Type of LCD TODO: hopefully the same as the x5 but check this*/
 131 #define CONFIG_LCD LCD_SA9200
 132
 133 /* #define USB_IPODSTYLE */
 134
 135 /* USB On-the-go */
 136 #define CONFIG_USBOTG USBOTG_ARC
 137
 138 /* enable these for the experimental usb stack */
 139 #define HAVE_USBSTACK
 140 #define USB_VENDOR_ID 0x0471
 141 #define USB_PRODUCT_ID 0x014f
 142
 143 /* WARNING! Enable Rockbox USB mass storage. */
 144 #ifndef BOOTLOADER
 145 #define USE_ROCKBOX_USB
 146 #endif
 147
 148 /* Virtual LED (icon) */
 149 #define CONFIG_LED LED_VIRTUAL
 150
 151 /* Define this if you have adjustable CPU frequency */
 152 #define HAVE_ADJUSTABLE_CPU_FREQ
 153
 154 #define MI4_FORMAT
 155 #define BOOTFILE_EXT    "mi4"
 156 #define BOOTFILE        "rockbox." BOOTFILE_EXT
 157 #define BOOTDIR "/.rockbox"
 158
 159 /* These values are unused, but need to be defined */
 160 #define FIRMWARE_OFFSET_FILE_CRC    0x0
 161 #define FIRMWARE_OFFSET_FILE_DATA   0x8
 162
 163 #define ICODE_ATTR_TREMOR_NOT_MDCT
 164
 165 #define INCLUDE_TIMEOUT_API
 166
 167 #endif /* SIMULATOR */