add global proxy / cache settings to httpget class. This removes the need of passing...
[Rockbox.git] / firmware / export / wm8731.h
blob009088960fc5f8a45b9504bcb49b40b2c62d0265
1 /***************************************************************************
2 * __________ __ ___.
3 * Open \______ \ ____ ____ | | _\_ |__ _______ ___
4 * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
5 * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
6 * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
7 * \/ \/ \/ \/ \/
8 * $Id$
10 * Copyright (C) 2005 by Dave Chapman
12 * All files in this archive are subject to the GNU General Public License.
13 * See the file COPYING in the source tree root for full license agreement.
15 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
16 * KIND, either express or implied.
18 ****************************************************************************/
20 #ifndef _WM8731_H
21 #define _WM8731_H
23 /* volume/balance/treble/bass interdependency */
24 #define VOLUME_MIN -730
25 #define VOLUME_MAX 60
27 extern int tenthdb2master(int db);
28 extern int tenthdb2mixer(int db);
30 extern void audiohw_preinit(void);
31 extern void audiohw_set_master_vol(int vol_l, int vol_r);
32 extern void audiohw_set_nsorder(int order);
33 extern void audiohw_set_sample_rate(int sampling_control);
35 /* Register addresses and bits */
36 #define LINVOL 0x00
37 #define LINVOL_MASK 0x1f
38 #define LINVOL_LRINBOTH (1 << 8)
39 #define LINVOL_LINMUTE (1 << 7)
41 #define RINVOL 0x01
42 #define RINVOL_MASK 0x1f
43 #define RINVOL_RINMUTE (1 << 7)
44 #define RINVOL_RLINBOTH (1 << 8)
46 #define LOUTVOL 0x02
47 #define LOUTVOL_LHPVOL_MASK 0x7f
48 #define LOUTVOL_LZCEN (1 << 7)
49 #define LOUTVOL_LRHP_BOTH (1 << 8)
51 #define ROUTVOL 0x03
52 #define ROUTVOL_RHPVOL_MASK 0x7f
53 #define ROUTVOL_RZCEN (1 << 7)
54 #define ROUTVOL_RLHP_BOTH (1 << 8)
56 #define AAPCTRL 0x04 /* Analog audio path control */
57 #define AAPCTRL_MIC_BOOST (1 << 0)
58 #define AAPCTRL_MUTEMIC (1 << 1)
59 #define AAPCTRL_INSEL (1 << 2)
60 #define AAPCTRL_BYPASS (1 << 3)
61 #define AAPCTRL_DACSEL (1 << 4)
62 #define AAPCTRL_SIDETONE (1 << 5)
63 #define AAPCTRL_SIDEATT_6dB (3 << 6)
64 #define AAPCTRL_SIDEATT_9dB (1 << 6)
65 #define AAPCTRL_SIDEATT_12dB (2 << 6)
66 #define AAPCTRL_SIDEATT_15dB (3 << 6)
68 #define DAPCTRL 0x05 /* Digital audio path control */
69 #define DAPCTRL_ADCHPD (1 << 0)
70 #define DAPCTRL_DEEMP_DISABLE (0 << 2)
71 #define DAPCTRL_DEEMP_32KHz (1 << 2)
72 #define DAPCTRL_DEEMP_44KHz (2 << 2)
73 #define DAPCTRL_DEEMP_48KHz (3 << 2)
74 #define DAPCTRL_DEEMP_MASK (3 << 2)
75 #define DAPCTRL_DACMU (1 << 3)
76 #define DAPCTRL_HPOR (1 << 4)
78 #define PDCTRL 0x06
79 #define PDCTRL_LINEINPD (1 << 0)
80 #define PDCTRL_MICPD (1 << 1)
81 #define PDCTRL_ADCPD (1 << 2)
82 #define PDCTRL_DACPD (1 << 3)
83 #define PDCTRL_OUTPD (1 << 4)
84 #define PDCTRL_OSCPD (1 << 5)
85 #define PDCTRL_CLKOUTPD (1 << 6)
86 #define PDCTRL_POWEROFF (1 << 7)
88 #define AINTFCE 0x07
89 #define AINTFCE_FORMAT_MSB_RJUST (0 << 0)
90 #define AINTFCE_FORMAT_MSB_LJUST (1 << 0)
91 #define AINTFCE_FORMAT_I2S (2 << 0)
92 #define AINTFCE_FORMAT_DSP (3 << 0)
93 #define AINTFCE_FORMAT_MASK (3 << 0)
94 #define AINTFCE_IWL_16BIT (0 << 2)
95 #define AINTFCE_IWL_20BIT (1 << 2)
96 #define AINTFCE_IWL_24BIT (2 << 2)
97 #define AINTFCE_IWL_32BIT (3 << 2)
98 #define AINTFCE_IWL_MASK (3 << 2)
99 #define AINTFCE_LRP_I2S_RLO (0 << 4)
100 #define AINTFCE_LRP_I2S_RHI (1 << 4)
101 #define AINTFCE_DSP_MODE_B (0 << 4)
102 #define AINTFCE_DSP_MODE_A (1 << 4)
103 #define AINTFCE_LRSWAP (1 << 5)
104 #define AINTFCE_MS (1 << 6)
105 #define AINTFCE_BCLKINV (1 << 7)
107 #define SAMPCTRL 0x08
108 #define SAMPCTRL_USB (1 << 0)
109 #define SAMPCTRL_BOSR_NOR_256fs (0 << 1)
110 #define SAMPCTRL_BOSR_NOR_384fs (1 << 1)
111 #define SAMPCTRL_BOSR_USB_250fs (0 << 1)
112 #define SAMPCTRL_BOSR_USB_272fs (1 << 1)
113 /* Bits 2-5:
114 * Sample rate setting are device-specific. See WM8731(L) datasheet
115 * for proper settings for the device's clocking */
116 #define SAMPCTRL_SR_MASK (0xf << 2)
117 #define SAMPCTRL_CLKIDIV2 (1 << 6)
118 #define SAMPCTRL_CLKODIV2 (1 << 7)
120 #define ACTIVECTRL 0x09
121 #define ACTIVECTRL_ACTIVE (1 << 0)
123 #define RESET 0x0f
124 #define RESET_RESET 0x0
126 /* SAMPCTRL values for the supported samplerates (24MHz MCLK/USB): */
127 #define WM8731_USB24_8000HZ 0x4d
128 #define WM8731_USB24_32000HZ 0x59
129 #define WM8731_USB24_44100HZ 0x63
130 #define WM8731_USB24_48000HZ 0x41
131 #define WM8731_USB24_88200HZ 0x7f
132 #define WM8731_USB24_96000HZ 0x5d
134 #endif /* _WM8731_H */