firmware/export/config-ipodnano.h

   1 /*
   2  * This config file is for the Apple iPod Nano
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 #define IPOD_ARCH 1
   7
   8 /* For Rolo and boot loader */
   9 #define MODEL_NUMBER 4
  10
  11 /* define this if you have recording possibility */
  12 #define HAVE_RECORDING
  13
  14 /* Define bitmask of input sources - recordable bitmask can be defined
  15    explicitly if different */
  16 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN)
  17
  18 /* define the bitmask of hardware sample rates */
  19 #define HW_SAMPR_CAPS   (SAMPR_CAP_44)
  20
  21 /* define the bitmask of recording sample rates */
  22 #define REC_SAMPR_CAPS  (SAMPR_CAP_44)
  23
  24 /* define this if you have a bitmap LCD display */
  25 #define HAVE_LCD_BITMAP
  26
  27 /* define this if you have a colour LCD */
  28 #define HAVE_LCD_COLOR
  29
  30 /* define this if you want album art for this target */
  31 #define HAVE_ALBUMART
  32
  33 /* define this if you have access to the quickscreen */
  34 #define HAVE_QUICKSCREEN
  35 /* define this if you have access to the pitchscreen */
  36 #define HAVE_PITCHSCREEN
  37
  38 /* define this if you would like tagcache to build on this target */
  39 #define HAVE_TAGCACHE
  40
  41 /* LCD dimensions */
  42 #define LCD_WIDTH  176
  43 #define LCD_HEIGHT 132
  44 #define LCD_DEPTH  16   /* 65536 colours */
  45 #define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 byte-swapped */
  46
  47 #define CONFIG_KEYPAD IPOD_4G_PAD
  48
  49 /* Define this if you do software codec */
  50 #define CONFIG_CODEC SWCODEC
  51
  52 /* define this if you have a real-time clock */
  53 #define CONFIG_RTC RTC_PCF50605
  54
  55 /* Define if the device can wake from an RTC alarm */
  56 #define HAVE_RTC_ALARM
  57
  58 /* Define this if you have a software controlled poweroff */
  59 #define HAVE_SW_POWEROFF
  60
  61 /* The number of bytes reserved for loadable codecs */
  62 #define CODEC_SIZE 0x80000
  63
  64 /* The number of bytes reserved for loadable plugins */
  65 #define PLUGIN_BUFFER_SIZE 0x80000
  66
  67 /* Define this if you have the WM8975 audio codec */
  68 #define HAVE_WM8975
  69
  70 #define AB_REPEAT_ENABLE 1
  71 #define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
  72
  73 /* Define this for LCD backlight available */
  74 #define HAVE_BACKLIGHT
  75 #define HAVE_BACKLIGHT_BRIGHTNESS
  76
  77 /* Main LCD backlight brightness range and defaults */
  78 #define MIN_BRIGHTNESS_SETTING      1
  79 #define MAX_BRIGHTNESS_SETTING      32
  80 #define DEFAULT_BRIGHTNESS_SETTING  16
  81
  82 /* We can fade the backlight by using PWM */
  83 #define HAVE_BACKLIGHT_PWM_FADING
  84
  85 /* define this if the unit uses a scrollwheel for navigation */
  86 #define HAVE_SCROLLWHEEL
  87 /* define from which rotation speed [degree/sec] on the acceleration starts */
  88 #define WHEEL_ACCEL_START 270
  89 /* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
  90 #define WHEEL_ACCELERATION 3
  91
  92 /* Define this if you can detect headphones */
  93 #define HAVE_HEADPHONE_DETECTION
  94
  95 /* define this if you have a flash memory storage */
  96 #define HAVE_FLASH_STORAGE
  97
  98 #define BATTERY_CAPACITY_DEFAULT 300   /* default battery capacity */
  99 #define BATTERY_CAPACITY_MIN     200   /* min. capacity selectable */
 100 #define BATTERY_CAPACITY_MAX     600   /* max. capacity selectable */
 101 #define BATTERY_CAPACITY_INC      20    /* capacity increment */
 102 #define BATTERY_TYPES_COUNT        1   /* only one type */
 103
 104 /* Hardware controlled charging? FIXME */
 105 //#define CONFIG_CHARGING CHARGING_SIMPLE
 106
 107 /* define this if the unit can be powered or charged via USB */
 108 #define HAVE_USB_POWER
 109
 110 #ifndef SIMULATOR
 111
 112 /* Define this if you have a PortalPlayer PP5022 */
 113 #define CONFIG_CPU PP5022
 114
 115 /* Define this if you want to use the PP5020 i2c interface */
 116 #define CONFIG_I2C I2C_PP5020
 117
 118 /* define this if the hardware can be powered off while charging */
 119 //#define HAVE_POWEROFF_WHILE_CHARGING
 120
 121 /* The start address index for ROM builds */
 122 #define ROM_START 0x00000000
 123
 124 /* The size of the flash ROM */
 125 #define FLASH_SIZE 0x100000
 126
 127 /* Define this to the CPU frequency */
 128 #define CPU_FREQ      24000000
 129
 130 #define CONFIG_LCD LCD_IPODNANO
 131
 132 /* Offset ( in the firmware file's header ) to the file length */
 133 #define FIRMWARE_OFFSET_FILE_LENGTH 0
 134
 135 /* Offset ( in the firmware file's header ) to the file CRC */
 136 #define FIRMWARE_OFFSET_FILE_CRC 0
 137
 138 /* Offset ( in the firmware file's header ) to the real data */
 139 #define FIRMWARE_OFFSET_FILE_DATA 8
 140
 141 #define USB_IPODSTYLE
 142
 143 /* USB On-the-go */
 144 #define CONFIG_USBOTG USBOTG_ARC
 145
 146 /* enable these for the experimental usb stack */
 147 #define HAVE_USBSTACK
 148 #define USB_VENDOR_ID 0x05ac
 149 #define USB_PRODUCT_ID 0x120a
 150
 151 /* Virtual LED (icon) */
 152 #define CONFIG_LED LED_VIRTUAL
 153
 154 /* Define this if you have adjustable CPU frequency */
 155 #define HAVE_ADJUSTABLE_CPU_FREQ
 156
 157 /* Define this if you can read an absolute wheel position */
 158 #define HAVE_WHEEL_POSITION
 159
 160 #define BOOTFILE_EXT "ipod"
 161 #define BOOTFILE "rockbox." BOOTFILE_EXT
 162 #define BOOTDIR "/.rockbox"
 163
 164 #define ICODE_ATTR_TREMOR_NOT_MDCT
 165
 166 #endif