firmware/export/config-iaudiox5.h

   1 /*
   2  * This config file is for iAudio X5
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 /* For Rolo and boot loader */
   7 #define MODEL_NUMBER 10
   8
   9 /* define this if you have recording possibility */
  10 #define HAVE_RECORDING
  11
  12 /* Define bitmask of input sources - recordable bitmask can be defined
  13    explicitly if different */
  14 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
  15
  16 /* define the bitmask of hardware sample rates */
  17 #define HW_SAMPR_CAPS   (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
  18
  19 /* define the bitmask of recording sample rates */
  20 #define REC_SAMPR_CAPS  (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
  21
  22 /* define this if you have a bitmap LCD display */
  23 #define HAVE_LCD_BITMAP
  24
  25 /* define this if you can flip your LCD */
  26 #define HAVE_LCD_FLIP
  27
  28 /* define this if you have a colour LCD */
  29 #define HAVE_LCD_COLOR
  30
  31 /* define this if you want album art for this target */
  32 #define HAVE_ALBUMART
  33
  34 /* define this if you can invert the colours on your LCD */
  35 #define HAVE_LCD_INVERT
  36
  37 /* define this if you have access to the quickscreen */
  38 #define HAVE_QUICKSCREEN
  39
  40 /* define this if you have access to the pitchscreen */
  41 #define HAVE_PITCHSCREEN
  42
  43 /* define this if you would like tagcache to build on this target */
  44 #define HAVE_TAGCACHE
  45
  46 /* LCD dimensions */
  47 #define LCD_WIDTH  160
  48 #define LCD_HEIGHT 128
  49 #define LCD_DEPTH  16   /* pseudo 262.144 colors */
  50 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
  51
  52 /* remote LCD */
  53 #define LCD_REMOTE_WIDTH  128
  54 #define LCD_REMOTE_HEIGHT 96
  55 #define LCD_REMOTE_DEPTH  2
  56
  57 #define LCD_REMOTE_PIXELFORMAT VERTICAL_INTERLEAVED
  58
  59 /* Define this if your LCD can be enabled/disabled */
  60 #define HAVE_LCD_ENABLE
  61
  62 /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
  63    should be defined as well. */
  64 #define HAVE_LCD_SLEEP
  65
  66 #define CONFIG_KEYPAD IAUDIO_X5M5_PAD
  67
  68 #define AB_REPEAT_ENABLE 1
  69 #define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
  70
  71 /* Define this if you do software codec */
  72 #define CONFIG_CODEC SWCODEC
  73
  74 /* define this if you have a real-time clock */
  75 #define CONFIG_RTC RTC_PCF50606
  76
  77 /* Define this if you have an remote lcd */
  78 #define HAVE_REMOTE_LCD
  79
  80 #define CONFIG_LCD LCD_X5
  81
  82 /* Define this for LCD backlight available */
  83 #define HAVE_BACKLIGHT
  84 #define HAVE_BACKLIGHT_BRIGHTNESS
  85
  86 /* Define this if you have a software controlled poweroff */
  87 #define HAVE_SW_POWEROFF
  88
  89 /* The number of bytes reserved for loadable codecs */
  90 #define CODEC_SIZE 0x80000
  91
  92 /* The number of bytes reserved for loadable plugins */
  93 #define PLUGIN_BUFFER_SIZE 0x80000
  94
  95 /* FM Tuner */
  96 #define CONFIG_TUNER       TEA5767
  97 #define CONFIG_TUNER_XTAL  32768
  98
  99 #define HAVE_TLV320
 100
 101 /* TLV320 has no tone controls, so we use the software ones */
 102 #define HAVE_SW_TONE_CONTROLS
 103
 104 #define BATTERY_CAPACITY_DEFAULT 950 /* default battery capacity */
 105 #define BATTERY_CAPACITY_MIN    950   /* min. capacity selectable */
 106 #define BATTERY_CAPACITY_MAX    2250  /* max. capacity selectable */
 107 #define BATTERY_CAPACITY_INC    50    /* capacity increment */
 108 #define BATTERY_TYPES_COUNT     1     /* only one type */
 109
 110 /* Hardware controlled charging? FIXME */
 111 #define CONFIG_CHARGING CHARGING_SIMPLE
 112
 113 #ifndef SIMULATOR
 114
 115 /* Define this if your LCD can set contrast */
 116 #define HAVE_LCD_CONTRAST
 117
 118 /* Define this if you have a Motorola SCF5250 */
 119 #define CONFIG_CPU MCF5250
 120
 121 /* Define this if you want to use coldfire's i2c interface */
 122 #define CONFIG_I2C I2C_COLDFIRE
 123
 124 /* define this if the hardware can be powered off while charging */
 125 #define HAVE_POWEROFF_WHILE_CHARGING
 126
 127 /* The size of the flash ROM */
 128 #define FLASH_SIZE 0x400000
 129
 130 /* Define this to the CPU frequency */
 131 #define CPU_FREQ      11289600
 132
 133 /* Define this if you have ATA power-off control */
 134 #define HAVE_ATA_POWER_OFF
 135
 136 /* Virtual LED (icon) */
 137 #define CONFIG_LED LED_VIRTUAL
 138
 139 /* Offset ( in the firmware file's header ) to the file CRC */
 140 #define FIRMWARE_OFFSET_FILE_CRC 0
 141
 142 /* Offset ( in the firmware file's header ) to the real data */
 143 #define FIRMWARE_OFFSET_FILE_DATA 8
 144
 145 /* USB On-the-go */
 146 #define CONFIG_USBOTG USBOTG_M5636
 147
 148 /* Define this if you have adjustable CPU frequency */
 149 #define HAVE_ADJUSTABLE_CPU_FREQ
 150
 151 #define BOOTFILE_EXT "iaudio"
 152 #define BOOTFILE "rockbox." BOOTFILE_EXT
 153 #define BOOTDIR "/.rockbox"
 154
 155 #define BOOTLOADER_ENTRYPOINT  0x001F0000
 156 #define FLASH_ENTRYPOINT       0x00001000
 157 #define FLASH_MAGIC            0xfbfbfbf1
 158
 159 #endif /* SIMULATOR */
 160
 161 /* Define this for FM radio input available */
 162 #define HAVE_FMRADIO_IN
 163
 164 /** Port-specific settings **/
 165
 166 /* Main LCD contrast range and defaults */
 167 #define MIN_CONTRAST_SETTING        1
 168 #define MAX_CONTRAST_SETTING        30
 169 #define DEFAULT_CONTRAST_SETTING    19 /* Match boot contrast */
 170
 171 /* Main LCD backlight brightness range and defaults */
 172 /* PCF50506 can output 0%-100% duty cycle but D305A expects %15-100%. */
 173 #define MIN_BRIGHTNESS_SETTING      1  /* 15/16 (93.75%) */
 174 #define MAX_BRIGHTNESS_SETTING      13 /*  3/16 (18.75%) */
 175 #define DEFAULT_BRIGHTNESS_SETTING  8  /*  8/16 (50.00%) = x5 boot default */
 176
 177 /* Remote LCD contrast range and defaults */
 178 #define MIN_REMOTE_CONTRAST_SETTING     10
 179 #define MAX_REMOTE_CONTRAST_SETTING     35
 180 #define DEFAULT_REMOTE_CONTRAST_SETTING 24 /* Match boot contrast */