firmware/export/config-gigabeat-s.h

   1 /*
   2  * This config file is for toshiba Gigabeat S
   3  */
   4
   5 #define NO_LOW_BATTERY_SHUTDOWN
   6 #define TARGET_TREE /* this target is using the target tree system */
   7
   8 #define TOSHIBA_GIGABEAT_S 1
   9
  10 /* For Rolo and boot loader */
  11 #define MODEL_NUMBER 21
  12
  13 /* define this if you have a bitmap LCD display */
  14 #define HAVE_LCD_BITMAP
  15
  16 /* define this if you have a colour LCD */
  17 #define HAVE_LCD_COLOR
  18
  19 /* define this if you have access to the quickscreen */
  20 #define HAVE_QUICKSCREEN
  21
  22 /* define this if you have access to the pitchscreen */
  23 #define HAVE_PITCHSCREEN
  24
  25 /* define this if you would like tagcache to build on this target */
  26 #define HAVE_TAGCACHE
  27
  28 /* define this if the target has volume keys which can be used in the lists */
  29 #define HAVE_VOLUME_IN_LIST
  30
  31 /* LCD dimensions */
  32 #define LCD_WIDTH  240
  33 #define LCD_HEIGHT 320
  34 #define LCD_DEPTH  16   /* 65k colours */
  35 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
  36
  37 #define CONFIG_KEYPAD GIGABEAT_S_PAD
  38
  39 /* Define this if you do software codec */
  40 #define CONFIG_CODEC SWCODEC
  41
  42 /* define this if you have a real-time clock */
  43 //#define CONFIG_RTC RTC_IMX31L
  44
  45 /* Define this for LCD backlight available */
  46 #define HAVE_BACKLIGHT
  47
  48 #define HAVE_LCD_ENABLE
  49
  50 //#define HAVE_BACKLIGHT_BRIGHTNESS
  51
  52 /* Main LCD backlight brightness range and defaults */
  53 #define MIN_BRIGHTNESS_SETTING          0   /* 0.5 mA */
  54 #define MAX_BRIGHTNESS_SETTING          63  /* 32 mA */
  55 #define DEFAULT_BRIGHTNESS_SETTING      39  /* 20 mA */
  56
  57 /* Define this if you have a software controlled poweroff */
  58 #define HAVE_SW_POWEROFF
  59
  60 /* The number of bytes reserved for loadable codecs */
  61 #define CODEC_SIZE 0x80000
  62
  63 /* The number of bytes reserved for loadable plugins */
  64 #define PLUGIN_BUFFER_SIZE 0x80000
  65
  66 /* Define this if you have the WM8975 audio codec */
  67 #define HAVE_WM8978
  68
  69
  70 #define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | \
  71                        SAMPR_CAP_11)
  72
  73 #ifndef SIMULATOR
  74
  75 /* The LCD on a Gigabeat is 240x320 - it is portrait */
  76 #define HAVE_PORTRAIT_LCD
  77
  78 #define CONFIG_CPU IMX31L
  79
  80 /* Define this if you want to use coldfire's i2c interface */
  81 #define CONFIG_I2C I2C_IMX31L
  82
  83 /* Type of mobile power - check this out */
  84 #define BATTERY_CAPACITY_DEFAULT 2000 /* default battery capacity */
  85 #define BATTERY_CAPACITY_MIN 1500        /* min. capacity selectable */
  86 #define BATTERY_CAPACITY_MAX 2500        /* max. capacity selectable */
  87 #define BATTERY_CAPACITY_INC 25         /* capacity increment */
  88 #define BATTERY_TYPES_COUNT  1          /* only one type */
  89
  90 /* Hardware controlled charging with monitoring */
  91 #define CONFIG_CHARGING CHARGING_MONITOR
  92
  93 /* define this if the hardware can be powered off while charging */
  94 #define HAVE_POWEROFF_WHILE_CHARGING
  95
  96 /* The size of the flash ROM */
  97 #define FLASH_SIZE 0x400000
  98
  99 /* Define this to the CPU frequency */
 100 /* TODO */
 101 #define CPU_FREQ 16934400
 102
 103 /* define this if the unit can be powered or charged via USB */
 104 #define HAVE_USB_POWER
 105
 106 /* Define this if you have ATA power-off control */
 107 #define HAVE_ATA_POWER_OFF
 108
 109 /* Virtual LED (icon) */
 110 #define CONFIG_LED LED_VIRTUAL
 111
 112 #define CONFIG_LCD LCD_GIGABEAT
 113
 114 /* define this if the backlight can be set to a brightness */
 115 //#define HAVE_BACKLIGHT_SET_FADING
 116 #define __BACKLIGHT_INIT
 117
 118 /* Offset ( in the firmware file's header ) to the file CRC */
 119 #define FIRMWARE_OFFSET_FILE_CRC 0
 120
 121 /* Offset ( in the firmware file's header ) to the real data */
 122 #define FIRMWARE_OFFSET_FILE_DATA 8
 123
 124 #define HAVE_SERIAL
 125
 126 /*Remove Comments from UART_INT to enable the UART interrupts,*/
 127 /*otherwise iterrupts will be disabled. For now we will test */
 128 /*UART state by polling the registers, and if necessary update this */
 129 /*method by using the interrupts instead*/
 130 //#define UART_INT
 131
 132 /* Define this if you have adjustable CPU frequency */
 133 /* #define HAVE_ADJUSTABLE_CPU_FREQ */
 134
 135 #define BOOTFILE_EXT "gigabeat"
 136 #define BOOTFILE "rockbox." BOOTFILE_EXT
 137 #define BOOTDIR "/.rockbox"
 138
 139 #endif