firmware/export/config-h300.h

   1 #define TARGET_TREE /* this target is using the target tree system */
   2 /*
   3  * This config file is for iriver H320, H340
   4  */
   5 #define IRIVER_H300_SERIES 1
   6
   7 /* For Rolo and boot loader */
   8 #define MODEL_NUMBER 2
   9
  10 /* define this if you have a bitmap LCD display */
  11 #define HAVE_LCD_BITMAP
  12
  13 /* define this if you have a colour LCD */
  14 #define HAVE_LCD_COLOR
  15
  16 /* define this if you can flip your LCD */
  17 #define HAVE_LCD_FLIP
  18
  19 /* define this if you have access to the quickscreen */
  20 #define HAVE_QUICKSCREEN
  21 /* define this if you have access to the pitchscreen */
  22 #define HAVE_PITCHSCREEN
  23
  24 /* define this if you would like tagcache to build on this target */
  25 #define HAVE_TAGCACHE
  26
  27 /* LCD dimensions */
  28 #define LCD_WIDTH  220
  29 #define LCD_HEIGHT 176
  30 #define LCD_DEPTH  16   /* 65k colours */
  31 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
  32
  33 /* remote LCD */
  34 #define LCD_REMOTE_WIDTH  128
  35 #define LCD_REMOTE_HEIGHT 64
  36 #define LCD_REMOTE_DEPTH  1
  37
  38 #define LCD_REMOTE_PIXELFORMAT VERTICAL_PACKING
  39
  40 #define CONFIG_KEYPAD IRIVER_H300_PAD
  41
  42 #define CONFIG_REMOTE_KEYPAD H300_REMOTE
  43
  44 /* Define this if you do software codec */
  45 #define CONFIG_CODEC SWCODEC
  46
  47 /* define this if you have a real-time clock */
  48 #define CONFIG_RTC RTC_PCF50606
  49
  50 /* Define this if you have an remote lcd */
  51 #define HAVE_REMOTE_LCD
  52
  53 /* Define if we have a hardware defect that causes ticking on the audio line */
  54 #define HAVE_REMOTE_LCD_TICKING
  55
  56 /* Define this for LCD backlight available */
  57 #define HAVE_BACKLIGHT
  58 #define HAVE_BACKLIGHT_BRIGHTNESS
  59
  60 /* Define this if you have a software controlled poweroff */
  61 #define HAVE_SW_POWEROFF
  62
  63 /* The number of bytes reserved for loadable codecs */
  64 #define CODEC_SIZE 0x80000
  65
  66 /* The number of bytes reserved for loadable plugins */
  67 #define PLUGIN_BUFFER_SIZE 0x80000
  68
  69 #define AB_REPEAT_ENABLE 1
  70
  71 #define CONFIG_TUNER TEA5767
  72 #define CONFIG_TUNER_XTAL 32768
  73
  74 #define HAVE_UDA1380
  75
  76 /* define this if you have recording possibility */
  77 #define HAVE_RECORDING
  78
  79 /* Define bitmask of input sources - recordable bitmask can be defined
  80    explicitly if different */
  81 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
  82
  83 /* define hardware samples rate caps mask */
  84 #define HW_SAMPR_CAPS   (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
  85
  86 /* define the bitmask of recording sample rates */
  87 #define REC_SAMPR_CAPS  (SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
  88
  89 #define HAVE_AGC
  90
  91 #define BATTERY_CAPACITY_DEFAULT 1300 /* default battery capacity */
  92 #define BATTERY_CAPACITY_MIN 1300 /* min. capacity selectable */
  93 #define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
  94 #define BATTERY_CAPACITY_INC 50   /* capacity increment */
  95 #define BATTERY_TYPES_COUNT  1    /* only one type */
  96
  97 /* Hardware controlled charging with monitoring */
  98 #define CONFIG_CHARGING CHARGING_MONITOR
  99
 100 /* define this if the unit can be powered or charged via USB */
 101 #define HAVE_USB_POWER
 102
 103 #ifndef SIMULATOR
 104
 105 /* Define this if your LCD can be enabled/disabled */
 106 #define HAVE_LCD_ENABLE
 107
 108 /* Define this if you have a Motorola SCF5249 */
 109 #define CONFIG_CPU MCF5249
 110
 111 /* Define this if you want to use coldfire's i2c interface */
 112 #define CONFIG_I2C I2C_COLDFIRE
 113
 114 /* The size of the flash ROM */
 115 #define FLASH_SIZE 0x400000
 116
 117 /* Define this to the CPU frequency */
 118 #define CPU_FREQ      11289600
 119
 120 /* Define this if you have ATA power-off control */
 121 #define HAVE_ATA_POWER_OFF
 122
 123 /* Virtual LED (icon) */
 124 #define CONFIG_LED LED_VIRTUAL
 125
 126 #define CONFIG_LCD LCD_H300
 127
 128 /* Offset ( in the firmware file's header ) to the file CRC */
 129 #define FIRMWARE_OFFSET_FILE_CRC 0
 130
 131 /* Offset ( in the firmware file's header ) to the real data */
 132 #define FIRMWARE_OFFSET_FILE_DATA 8
 133
 134 /* USB On-the-go */
 135 #define CONFIG_USBOTG USBOTG_ISP1362
 136
 137 /* Define this if you have adjustable CPU frequency */
 138 #define HAVE_ADJUSTABLE_CPU_FREQ
 139
 140 #define BOOTFILE_EXT "iriver"
 141 #define BOOTFILE "rockbox." BOOTFILE_EXT
 142 #define BOOTDIR "/.rockbox"
 143
 144 #define BOOTLOADER_ENTRYPOINT  0x001F0000
 145 #define FLASH_ENTRYPOINT       0x00001000
 146 #define FLASH_MAGIC            0xfbfbfbf1
 147
 148 /* Define this if there is an EEPROM chip */
 149 #define HAVE_EEPROM
 150
 151 #endif /* SIMULATOR */
 152
 153 /* Define this for FM radio input available */
 154 #define HAVE_FMRADIO_IN
 155
 156 /** Port-specific settings **/
 157
 158 /* Main LCD contrast range and defaults */
 159 #define MIN_CONTRAST_SETTING        5
 160 #define MAX_CONTRAST_SETTING        63
 161 #define DEFAULT_CONTRAST_SETTING    40
 162
 163 /* Main LCD backlight brightness range and defaults */
 164 /* accepts 0..15 but note that 0 and 1 give a black display on H300! */
 165 #define MIN_BRIGHTNESS_SETTING      2  /*  2/16 (12.50%) */
 166 #define MAX_BRIGHTNESS_SETTING      15 /* 15/16 (93.75%) */
 167 #define DEFAULT_BRIGHTNESS_SETTING  9  /*  9/16 (56.25%) */
 168
 169 /* Remote LCD contrast range and defaults */
 170 #define MIN_REMOTE_CONTRAST_SETTING     5
 171 #define MAX_REMOTE_CONTRAST_SETTING     63
 172 #define DEFAULT_REMOTE_CONTRAST_SETTING 42