more comments

[PyX/mjg.git] / faq / pyxfaq.tex

\documentclass[11pt,DIV14]{scrartcl}
\usepackage[latin1]{inputenc}
\usepackage{url}
\usepackage{rcs}
\usepackage{mathptmx}
%\usepackage[all,comments]{glifaq}
\usepackage[answered]{glifaq}
\usepackage[pdftex]{hyperref}
\hypersetup{pdftitle={PyX FAQ}%
            ,pdfauthor={\textcopyright\ Gert-Ludwig Ingold
                       <gert.ingold@physik.uni-augsburg.de>}%
            ,colorlinks=true%
            ,linkcolor=blue}
\begin{document}
\RCS $Id$
\RCS $Revision$
\RCS $Date$
\begin{center}
\LARGE\sffamily Some frequently and\\ 
not so frequently asked questions\\ 
about \PyX\footnote{This version of the FAQ is intended for use with \PyX\ 
version 0.5.1.}\\
\par
{\small\sffamily (version \RCSRevision\ of \RCSDate)}\\[1truecm]
\large
Gert-Ludwig Ingold \par
\href{mailto:gert.ingold@physik.uni-augsburg.de}{\url{<gert.ingold@physik.uni-augsburg.de>}}
\end{center}
\toc

\vspace{2truecm}
\section*{Acknowledgements}
The following persons have in one way or the other contributed to the answers
given in this FAQ:\\ 
Jörg Lehmann, Michael Schindler, Andr{\'e} Wobst.
\newpage

\section{General aspects of \PyX}
\question{a}{Where do I get the latest version of \PyX?}
{}
{The current release of \PyX{} (as well as older ones) is freely available 
from \url{http://pyx.sourceforge.net} where also a CVS repository with the 
latest patches can be found. Possibly older versions of \PyX{} are
also available as package for
various Linux distributions: see, for instance,  
\url{http://packages.debian.org/testing/python/python-pyx.html} for
information on the \PyX{} package in Debian GNU/Linux, 
\url{http://packages.gentoo.org/ebuilds/?pyx-0.3.1} for a Gentoo Linux
ebuild, and
\url{http://www.suse.de/en/private/products/suse_linux/i386/packages_professional/python-pyx.html}
for the \PyX{} package in the SUSE LINUX professional distribution.
}

\question{c}{How can I determine the version of \PyX{} running on my 
machine?}
{}
{Start a python session (usually by typing \texttt{python} at the system 
prompt) and then type the following two commands (\texttt{>>>} is the python 
prompt)
\begin{progcode}
>>> import pyx\\
>>> pyx.\us\us{}version\us\us
\end{progcode}
}

\question{c}{Does \PyX{} run under my favorite operating system?}
{}
{Yes, if you have installed Python (\uaref{q:what_is_python})
and \TeX{} (\uaref{q:what_is_tex}). Both are available for
a large variety of operating systems so chances are pretty good that you will 
get \PyX{} to work on your system.
}

\question{c}{Under which versions of Python will \PyX{} run?}
{}
{\PyX{} is supposed to work with Python 2.0 and above. However, most of the
development takes place under the current production version of Python (2.3.3
by the time of this writing) and thus \PyX{} is better tested with this version. On the other hand, the examples and tests are verified to run with all Python
versions 2.x. \PyX{} will not work with Python 1.x due to missing language 
features. 

The version of your Python interpreter can be determined by calling 
it with the option \texttt{-V}. Alternatively, you can simply start the 
interpreter and take a look at the startup message. Note that there may be 
different versions of Python installed on your system at the same time. The
default Python version need not be the same for all users.
}

\question{a}{Does \PyX{} provide a GUI to view the produced image? \new}
{}
{No, \PyX{} itself does not provide a means to view the produced image. The 
result of a \PyX{} run is an EPS (= Encapsulated PostScript) file which can
be viewed, printed or imported into other applications. There are several
means of viewing EPS files. A common way would be to use \texttt{ghostview}
which provides a user interface to the PostScript interpreter
\texttt{ghostscript}. More information about this software, which is
available for a variety of platforms, can be found at 
\url{http://www.cs.wisc.edu/~ghost/}. If you do not own a printer which is
capable of printing PostScript files directly, \texttt{ghostscript} may
also be useful to translate the EPS file produced by \PyX{} into something
your printer will understand.}

\question{a}{Where can I get help if my question is not answered in this FAQ?}
{}
{The \PyX{} sources contain a reference manual and a set of examples 
demonstrating various features of \PyX. If the feature you are looking for is
among them, using the appropriate part of the example code or adapting it for
your purposes may help.

There is also a user discussion list about \PyX{} which you can subscribe to
at \url{http://lists.sourceforge.net/lists/listinfo/pyx-user}. The archive of
the discussion list is available at \url{http://sourceforge.net/mailarchive/forum.php?forum_id=23700}.

Finally, it might be worth checking \url{http://pyx.sourceforge.net/pyxfaq.pdf}
for an updated version of this FAQ.
}

\section{Python}

\question{c}{What is Python?}
{}
{\label{q:what_is_python}
From \url{www.python.org}:
\begin{quote}
Python is an \textit{interpreted, interactive, object-oriented} programming 
language. It is often compared to Tcl, Perl, Scheme or Java.

Python combines remarkable power with very clear syntax. It has modules, 
classes, exceptions, very high level dynamic data types, and dynamic typing. 
There are interfaces to many system calls and libraries, as well as to various 
windowing systems (X11, Motif, Tk, Mac, MFC). New built-in modules are easily 
written in C or C++. Python is also usable as an extension language for 
applications that need a programmable interface.

The Python implementation is portable: it runs on many brands of UNIX, on 
Windows, OS/2, Mac, Amiga, and many other platforms. If your favorite system 
isn't listed here, it may still be supported, if there's a C compiler for it. 
Ask around on \href{news:comp.lang.python}{news:comp.lang.python} --- or just 
try compiling Python yourself.

The Python implementation is 
\href{http://www.python.org/doc/Copyright.html}{copyrighted} 
but \textbf{freely usable and distributable, even for commercial use}.
\end{quote}
}

\question{a}{Where can I learn more about Python?}
{}
{The place to start is \url{www.python.org} where you will find plenty of
information on Python including tutorials.
}

\question{c}{What do I need to import in order to use \PyX?}
{}
{It is recommended to begin your Python code with 
\begin{progcode}
from pyx import *
\end{progcode}
when using \PyX. This allows you for example to write simply 
\texttt{graph.graphxy}
instead of \texttt{pyx.graph.graphxy}. The following modules will be loaded:
\texttt{box}, \texttt{canvas}, \texttt{color}, \texttt{connector}, \texttt{data},
\texttt{deco}, \texttt{epsfile}, \texttt{graph}, \texttt{path},
\texttt{style}, \texttt{trafo}, \texttt{tex}, \texttt{text}, and
\texttt{unit}.

For convenience, you might import specific objects of a module like in
\begin{progcode}
from graph import graphxy
\end{progcode}
which allows you to write \texttt{graphxy()} instead of \texttt{graph.graphxy()}.

All code segments in this document assume that the import line mentioned in
the first code snippet is present.
}

\question{a}{What is a raw string and why should I know about it when
  using \PyX?}
{}
{\label{q:raw_string}
The backslash serves in standard Python strings to start an escape sequence.
For example {\cs n} corresponds to a newline character. On the other hand,
\TeX{} and \LaTeX{}, which do the typesetting in \PyX, use the backslash to
indicate the start of a command. In order to avoid the standard interpretation,
the string should be marked as a raw string by prepending it by an \texttt{r} 
like in
\begin{progcode}
c.text(0, 0, r"\${\cs alpha}{\cs beta}{\cs gamma}\$")
\end{progcode}
}

\section{Plotting of graphs}

\subsection{General aspects}

\question{c}{How do I generate a graph from data as simply as possible?}
{}
{\label{q:mingraphdata}
Suppose that you have a data file \texttt{x.dat} containing values for
$x$ and $y$ in two columns. Then the following code will do the job
\begin{progcode}
from pyx import *\\
\\
g = graph.graphxy(width=10)\\
g.plot(graph.data("x.dat", x=1, y=2))\\
g.writetofile("x")
\end{progcode}
\texttt{graphxy} creates a canvas (called \texttt{g} in this example) onto 
which the graph will be drawn and it sets the default behavior including the 
axis. There is, however, no default value for the width of the graph. In 
\texttt{plot} you have to specify the name of the data file and the columns 
from which the data should be taken. Finally, \texttt{writetofile} will 
generate the postscript file \texttt{x.eps} which you can view or print.

A minimal example is also provided in the \PyX{} distribution as 
\path{examples/graphs/minimal.py}.
}

\question{a}{How do I generate a graph of a function as simply as possible?}
{}
{The following example will draw a parabola:
\begin{progcode}
from pyx import *\\
\\
g = graph.graphxy(width=10,\\
~~~~~~~~~~~~~~~~~~x=graph.linaxis(min=-2, max=2)\\
~~~~~~~~~~~~~~~~~~)\\
\\
g.plot(graph.function("y=x**2"))\\
\\
g.writetofile("x")
\end{progcode}
Most of the code has been explained in \uaref{q:mingraphdata}. The main 
difference is that here you need to specify minimum and maximum for the 
$x$-axis so that \PyX{} knows in which range to evaluate the function.

See \uaref{q:zeropathattrs} for an explanation of how one can suppress the
zero lines.

Another, slightly more complex, example is also provided in the \PyX{} 
distribution as \path{examples/graphs/piaxis.py}.
}

\question{a}{How can I stack graphs?}
{}
{\PyX{} always needs a canvas to draw on. One possibility therefore consists
in creating a new canvas with
\begin{progcode}
c = canvas.canvas()
\end{progcode}
and inserting the graphs into this canvas with \texttt{c.insert(...)}. Here,
\texttt{...} has to be replaced by the name of the graph. Alternatively, the
canvas created with \texttt{graph.graphxy} for one of the graphs can be used
to insert the other graphs even if they will be positioned outside the
first graph.

The second issue to address is positioning of the graphs. By specifying
\texttt{xpos} and \texttt{ypos} when calling \texttt{graphxy}, you can
define the position of a graph. Later on, the position and size of a 
graph \texttt{g} can be referred to as \texttt{g.xpos}, \texttt{g.ypos},
\texttt{g.width}, and \texttt{g.height} even if for example the height has 
never been specified explicitly but is only defined by a \PyX{} default. 

The following example shows how to put graph \texttt{gupper} above graph 
\texttt{glower} on a canvas \texttt{c}:
\begin{progcode}
from pyx import *\\
from graph import graphxy\\
\\
c = canvas.canvas()\\
\\
glower = graphxy(width=10)\\
glower.plot(...)\\
c.insert(glower)\\
\\
gupper = graphxy(width=10, ypos=glower.ypos+glower.height+2)\\
gupper.plot(...)\\
\\
c.insert(gupper)\\
c.writetofile(...)
\end{progcode}
where \texttt{...} has to be replaced by the appropriate information like
data and symbol specifications and the name of the output file. Here,
\texttt{c.insert} is used to actually insert the subcanvasses 
for the graphs into the main canvas \texttt{c} and \texttt{c.writetofile}
in the last line requests to write the contents of this canvas to a file.

%In order to suppress the labels of the $x$-axis of the upper graph, use
%\begin{progcode}
%myaxispainter = graph.axispainter(labelattrs=None)
%
%gupper = graph.graphxy(...,
%                       x=graph.linaxis(...,
%                                      part=graph.linpart(),
%                                       painter=myaxispainter)
%                       )
%\end{progcode}
}

\question{a}{How can I plot grid data? \new}
{}
{\PyX{} offers support for plotting three-dimensional data as two-dimensional
color plots or grey-scale plots and of vector fields by providing ways to
plot rectangles and arrows in graphs. 

We start by considering the task of creating a two-dimensional color plot by 
plotting a number of filled rectangles. One first needs to create a data set 
which consists of five entries per data point. These are the lower left corner 
$(x_\mathrm{min},y_\mathrm{min})$ and the upper right corner 
$(x_\mathrm{max},y_\mathrm{max})$ of the triangle and a value between 0 and 1 
determining the color via a \PyX{} color palette. The following code gives an 
idea of how to proceed:
\begin{progcode}
g.plot(graph.data("datafile.dat"), xmin=0, xmax=1, ymin=2, ymax=3, color=4),\\
~~~~~~~graph.rect(color.palette.ReverseRainbow)\\
~~~~~~)\\
g.dodata()
\end{progcode}
Here, we assume that the data are stored in \texttt{datafile.dat} and the
columns contain $x_\mathrm{min}$, $x_\mathrm{max}$, $y_\mathrm{min}$,
$y_\mathrm{max}$, and the color value in this order. To determine the color,
we use the \texttt{ReverseRainbow} palette. The last line instructs \PyX{} to
plot the rectangles before plotting the axes. Otherwise, the axes might be
covered partially by the rectangles and, in particular, the ticks might not
be visible. Grey-scale plots can easily be generated by specifying the palette
\texttt{Gray} or \texttt{ReverseGray} (cf.\ appendix C of the manual for a list
of predefined palettes).

At first sight, it seems surprising that plotting of grid data requires
the specification of four coordinates for the rectangle. The reason is that
this allows to draw rectangles of varying sizes which may help to reduce the
size of the postscript file by combining rectangles of the same color in 
horizontal or vertical direction. For example, it may be sufficient to plot
a grey-scale image in a small number of grey shades and then combining
rectangles may be appropriate. Note, though, that this step is part of the
data creation and not preformed by \PyX{}. Another advantage of fully
specifying each rectangle is that it is straightforward to leave parts of the
graph blank.

A frequent task is to rescale data to the interval $[0,1]$. Suppose that the
data are stored in the variable \texttt{data} and that the fifth column 
(denoted in Python by the index 4) has to be rescaled. Then the following 
python code will do the job:
\begin{progcode}
datamax = max(*[d[4] for d in data])\\
datamin = min(*[d[4] for d in data])\\
for d in data:\\
~~d[4] = (d[4]-datamin)/(datamax-datamin)
\end{progcode}

The same ideas as for the color plot can be applied to plot vector fields where
each data point is represented by an arrow. In this case a data point is 
specified by the position of the arrow, its size and its direction as indicated
in the following code snippet:
\begin{progcode}
g.plot(graph.data("datafile.dat"), x=0, y=1, size=2, angle=3),\\
~~~~~~~graph.arrow()\\
~~~~~~)
\end{progcode}

Complete code examples can be found in \path{examples/graphs/mandel.py} and
\path{examples/graphs/arrows.py}\,.
}

\question{t}{I would like a key for only some of my data sets. How do I do
that?}
{}
{
}

\subsection{Axis properties}

\question{a}{How do I specify the tick increment? \changed}
{}
{In the partition of a linear axis, the increments associated with ticks,
subticks etc.\ can be specified as argument of \texttt{linpart}. In the
following example, ticks will be drawn at even values while subticks will
be drawn at all integers:
\begin{progcode}
tg = graph.graphxy(width=10,\\
~~~~~~~~~~~~~~~~~~~x=graph.linaxis(min=1, max=10,\\
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~parter=graph.linparter(tickdist=[2,1]))\\
~~~~~~~~~~~~~~~~~~~)
\end{progcode}
}

\question{a}{How do I get rid of the zero line?}
{}
{\label{q:zeropathattrs}
The \texttt{axispainter} takes an argument \texttt{zeropathattrs} which 
defaults to an empty list. Setting the \texttt{axispainter} for the
appropriate axis to \texttt{None} will remove the zero line like in this
example:
\begin{progcode}
myaxispainter = graph.axispainter(zeropathattrs=None)\\
\\
g = graph.graphxy(width=10,\\
~~~~~~~~~~~~~~~~~~x=graph.linaxis(min=-5, max=5, painter=myaxispainter),\\
~~~~~~~~~~~~~~~~~~y=graph.linaxis(min=-5, max=5)\\
~~~~~~~~~~~~~~~~~~)
\end{progcode}
This will keep the horizontal zero line but discard the vertical one.
}

\subsection{Data properties}

\question{a}{How do I choose the symbol?}
{}
{\label{q:choose_symbol}
Suppose a graph called \texttt{g} has been initialized, e.g. by using
\texttt{graph.graphxy}. Then, data and the style of their representation
in the graph are defined by calling \texttt{g.plot} like in the following
example in which filled circles are requested:
\begin{progcode}
g.plot(graph.data("test.dat"),\\
~~~~~~~graph.symbol(graph.symbol.circle, symbolattrs=[deco.filled])\\
~~~~~~~)
\end{progcode}
}

\question{a}{How do I choose the color of the symbols?}
{}
{Colors are not properties of the symbol as such and can therefore not
be specified in \texttt{symbolattrs} directly. The color is rather related
to the plotting of the symbol as defined by \texttt{deco.stroked} or
\texttt{deco.filled}. With
\begin{progcode}
graph.symbol(graph.symbol.circle,\\
~~~~~~~~~~~~~symbolattrs=[deco.stroked([color.rgb.red]),\\
~~~~~~~~~~~~~~~~~~~~~~~~~~deco.filled([color.rgb.green])]\\
~~~~~~~~~~~~~)
\end{progcode}
you will obtain a circle filled in green with a red borderline.
}

\question{a}{How do I choose the line style?}
{}
{If you do not want to use symbols, you can set the line style as in this
example
\begin{progcode}
g.plot(graph.data("test.dat"),\\
~~~~~~~graph.line(lineattrs=[style.linewidth.Thin])\\
~~~~~~~)
\end{progcode}
where the linewidth is set.

If you also want to use symbols, you can set the line attributes together
with the symbols.  Extending the example in \ref{q:choose_symbol}),
you could use
\begin{progcode}
g.plot(graph.data("test.dat"),\\
~~~~~~~graph.symbol(graph.symbol.circle, \\
~~~~~~~~~~~~~~~~~~~~symbolattrs=[deco.filled],\\
~~~~~~~~~~~~~~~~~~~~lineattrs=[style.linewidth.Thin, style.linestyle.dashed]\\
~~~~~~~~~~~~~~~~~~~~)\\
~~~~~~~)
\end{progcode}
to set the linewidth and to choose dashed lines. 
}

\section{\TeX{} and \LaTeX{}}

\subsection{General aspects}

\question{a}{What is \TeX/\LaTeX{} and why do I need it?}
{}
{\label{q:what_is_tex}
\TeX{} is a high quality typesetting system developed by Donald E. Knuth 
which is available for a wide variety of operating systems. \LaTeX{} is a 
macro package originally developed by Leslie Lamport which makes life with 
\TeX{} easier, in particular for complex typesetting tasks. The current 
version of \LaTeX{} is referred to as \LaTeXe{} and offers e.g.\ improved 
font selection as compared to the older \LaTeX{} 2.09 which should no longer 
be used. 

All typesetting tasks in \PyX{} are finally handed over to \TeX{} (which is the
default) or \LaTeX{}, so that \PyX{} cannot do without it. On the other hand,
the capabilities of \TeX{} and \LaTeX{} can be used for complex tasks where
both graphics and typesetting are needed.
}

\question{a}{I don't know anything about \TeX{} and \LaTeX{}. Where can I read 
something about it?}
{}
{\label{q:intro_tex_latex}
Take a look at CTAN (\uaref{q:ctan}) where in \ctan{info}
you may be able to find some useful information. There exists for example 
``A Gentle Introduction to \TeX'' by M.~Doob (\ctan{gentle/gentle.pdf}) and
``The Not So Short Introduction to \LaTeXe'' 
(\ctan{info/lshort/english/lshort.pdf}) by T.~Oetiker et al. The latter has
been translated into a variety of languages among them korean (which you will
not be able to read unless you have appropriate fonts installed) and mongolian.

Of course, it is likely that these documents will go way beyond what you 
will need for generating graphics with \PyX{} so you don't have to read all
of it (unless you want to use \TeX{} or \LaTeX{} for typesetting which can be
highly recommended). 

There exists also a number of FAQs on \TeX{} at \ctan{help}.
}

\question{a}{What is CTAN?}
{}
{\label{q:ctan}
CTAN is the Comprehensive TeX Archive Network where you will find almost
everything related to \TeX{} and friends. The main CTAN servers are 
\url{tug.ctan.org}, \url{dante.ctan.org}, and \url{cam.ctan.org}. A list of 
FTP mirrors can be found at \ctan{CTAN.sites}. 

In this FAQ, \texttt{CTAN:} refers to the root of an anonymous ftp CTAN tree, 
e.g.  \url{ftp://ctan.tug.org/tex-archive/}, 
\url{ftp://ftp.dante.de/tex-archive/},
and \url{ftp://ftp.tex.ac.uk/tex-archive/}. The links to CTAN in this document
point to one of these servers but you might consider using a FTP mirror closer
to you in order to reduce traffic load.
}

\question{a}{Is there support for Con\TeX{}t?}
{}
{No, and as far as I know there no plans to provide it in the near future. 
Given the close ties between Con\TeX{}t and Meta\-Post, Con\TeX{}t users 
probably prefer to stick with the latter anyway.
}

\subsection{\TeX{} and \LaTeX{} commands useful for \PyX}

\question{a}{How do I get a specific symbol with \TeX{} or \LaTeX?}
{}
{A list of mathematical symbols together with the appropriate command name
can be found at \ctan{info/symbols/math/symbols.ps}. A comprehensive list
containing more than 2500 symbols for use with \LaTeX{} can be obtained from 
\ctan{info/symbols/comprehensive/symbols-a4.pdf}. In some cases it might be 
necessary to install fonts or packages available from CTAN 
(\uaref{q:ctan}).
}

\subsection{\TeX{} and \LaTeX{} errors}

\question{a}{Undefined control sequence \cs{usepackage}}
{}
{\label{q:undefined_usepackage}
The command \cs usepackage is specific to \LaTeX{}. Since by default \PyX{}
uses \TeX{}, you have to specify the correct mode:
\begin{progcode}
text.set(mode="latex")
\end{progcode}
}

\question{a}{Undefined control sequence \cs{frac}}
{}
{\label{q:undefined_frac}
The command \cs frac is only available in \LaTeX{}. In \TeX{} you should
use \texttt{\cb{a\cs over b}} in math mode to produce ${a\over b}$. As an 
alternative you may ask for the \LaTeX{} mode as explained in 
\ref{q:undefined_usepackage}.
}

\question{a}{Missing \$ inserted}
{}
{You have specified \TeX- or \LaTeX-code which is only valid in math mode. 
Typical examples are greek symbols, sub- and superscripts or fractions. 

On the \PyX{} level, you can specify math mode for the whole string by using
\texttt{text.mathmode} as in
\begin{progcode}
c.text(0, 0, r"{\cs alpha}", text.mathmode)
\end{progcode}
Keep also in mind that the standard Python interpretation of the backslash as 
introducing escape sequences needs to be prevented 
\uaref{q:raw_string}.

On the \TeX/\LaTeX{} level you should enclose the commands requiring math
mode in \$'s. As an example, \texttt{\$\cs alpha\us i\hat j\$} will produce 
$\alpha_i^j$. This allows you to specify math mode also for substrings. There 
exist other ways to specify math mode in \TeX{} and \LaTeX{} which are 
particularly useful for more complex typesetting tasks. To learn more about 
it, you should consult the documentation 
\uaref{q:intro_tex_latex}. 
}

\question{a}{Font shape `OT1/xyz/m/n' undefined}
{}
{\label{q:fontshape_undefined}
You have asked to use font \texttt{xyz} which is not available. Make sure that
you have this font available in Type1 format, i.e.\ there should be a 
file \texttt{xyz.pfb} somewhere. If your \TeX{} system is TDS compliant 
(TDS=\TeX{} directory structure, cf.\ \ctan{tds/draft-standard/tds/tds.pdf}) 
you should take a look at the subdirectories of 
\path{TEXMF/fonts/type1}.
}

\question{a}{File \dots\ is not available or not readable}
{}
{\label{q:no_lfs}
Such an error message might already occur when running the example file 
\texttt{hello.py} included in the \PyX{} distribution. Usually, the error 
occurs due to an overly restrictive umask setting applied when unpacking the 
\texttt{tar.gz} sources. This may render the file mentioned in the error 
message unreadable because the python distutil installation package doesn't 
change the file permissions back to readable for everyone. 

If the file exists, the problem can be solved by changing the permissions to 
allow read access.}

\question{a}{No information for font `cmr10' found in font mapping file}
{}
{\label{q:no_cmr10}
Such an error message can already be encountered by simply running the example
file \texttt{hello.py} included in the \PyX{} distribution. The likely reason
is that the \TeX{} system does not find the cmr fonts in Type1 format.
\PyX{} depends on these fonts as it does not work with the traditional
pk fonts which are stored as bitmaps.

Therefore, the first thing to make sure is that the cmr Type1 fonts are
installed. In some \TeX{} installations, the command \texttt{kpsewhich 
cmr10.pfb} will return the appropriate path if the cmr fonts exist in the 
binary Type1 format (extension \texttt{pfb}) required by \PyX. If the command 
does not work but the TeX{} system is TDS compliant 
(\uaref{q:fontshape_undefined}), a look should be taken at 
\path{TEXMF/fonts/type1/bluesky/cm} where \texttt{TEXMF} is the root of the 
\texttt{texmf} tree.

If the Type1 fonts do not exist on the system, they may be obtained from
the CTAN \uaref{q:ctan} at \ctan{fonts/cm/ps-type1/bluesky}. See the 
\texttt{README} for information about who produced these fonts and why they
are freely available.

If the Type1 fonts exist, the next step is to take a look at 
\texttt{psfonts.map}. There may be several files with this name on the system, 
so it is important to find out which one TeX is actually using. 
\texttt{kpsewhich psfonts.map} might give this information.

The most likely problem is that this file does not contain a line telling TeX
what to do if it encounters a request for font \texttt{cmr10}, i.e. the 
following line 
may be missing
\begin{progcode}
~~~cmr10~~~~~~~~~~~CMR10~~~~~~~~~~~<cmr10.pfb
\end{progcode}
It is probable that the required lines (in practice, you do not just need 
\texttt{cmr10}) are found in a file named \texttt{psfonts.cmz} which resides in 
\path{TEXMF/dvips/bluesky}. 

One solution is to instruct \PyX{} to read additional map files like 
\texttt{psfonts.cmz} or \texttt{psfonts.amz}. This can be achieved by modifying 
the appropriate \texttt{pyxrc} file which is either the systemwide 
\texttt{/etc/pyxrc} or \texttt{.pyxrc} in the user's home directory. Here, the 
names of the map files to be read by \PyX{} should be appended separated by 
whitespaces like in the following example:
\begin{progcode}
fontmaps = psfonts.map psfonts.cmz psfonts.amz
\end{progcode}
The same effect can be achieved by inserting the following line into the
\PyX{} code:
\begin{progcode}
text.set(fontmaps="psfonts.cmz psfonts.amz")
\end{progcode}

An alternative approach consists in modifying the \TeX{} installation by 
inserting the contents of the desired map files like \texttt{psfonts.cmz} into 
\texttt{psfonts.map}. Probably, \texttt{psfonts.map} recommends not to do this 
by hand. In this case the instructions given in the file should be followed.  
Otherwise, \texttt{psfonts.cmz} should be copied into \texttt{psfonts.map} while 
keeping a backup of the old \texttt{psfonts.map} just in case. After these 
changes, \PyX{} most likely will be happy. When inserting \texttt{psfonts.cmz} 
into \texttt{psfonts.map} it may be a good idea to include \texttt{psfonts.amz} 
as well. \texttt{psfonts.amz} contains information about some more fonts which 
might be needed at some point. Making these changes ot \texttt{psfonts.map} 
will imply that the \TeX{} system will use the cmr fonts in Type1 format 
instead of pk format which is actually not a bad thing, in particular if 
\texttt{latex}~/ \texttt{dvips}~/ \texttt{ps2pdf} is used to generate PDF 
output. With fonts in pk format this will look ugly and using Type1 fonts 
solves this problem as well. When \texttt{pdflatex} is used to create PDF files, 
Type1 fonts will be used anyway.
}

\subsection{Fonts}

\question{t}{I have Type1 fonts in \texttt{pfa} format. How do I obtain the 
corresponding \texttt{pfb} files needed by \PyX?}
{}
{
}

\question{a}{I want to use a font other than computer modern roman}
{}
{\label{q:other_font}
As long as you have a font in Type1 format available, this should be no
problem (even though it may cost you some time to set up things properly).

In the simplest case, your \LaTeX{} system contains everything needed. 
Including the following line into your code will probably work
\begin{progcode}
text.set(mode="latex")\\
text.preamble(r"\cs{usepackage}\cb{mathptmx}")
\end{progcode}
and give you Times as roman font. 

If you own one of the more common commercial fonts, take a look at
\ctan{fonts} and its subdirectories as well as at the web page
\url{http://home.vr-web.de/was/fonts.html} of Walter Schmidt. It is not
unlikely that somebody has already done most of the work for you and created
the files needed for the font to work properly with \LaTeX. But remember:
we are talking about commercial fonts here, so do not expect to find the fonts
themselves for free.

If none of these cases applies, you should spend some time reading
manuals about font installation, e.g.\ \ctan{macros/latex/doc/fntguide.pdf}
(of course, I do not expect font wizards to read the last few lines).
}

\question{a}{Can I use a TrueType font with \PyX?}
{}
{Not directly as \PyX{} only knows how to handle Type1 fonts (although it is
possible to get \LaTeX{} to work with TrueType fonts). However, you may use
\texttt{ttf2pt1} (from \url{http://ttf2pt1.sourceforge.net}) to convert a 
TrueType font into a Type1 font which you then install in your \TeX{} system 
\uaref{q:other_font}. You will loose hinting information 
in the conversion process but this should not really matter on output devices 
with not too low resolution.
}

\end{document}