1 *usr_44.txt* For Vim version 7.2b. Last change: 2006 Apr 24
3 VIM USER MANUAL - by Bram Moolenaar
5 Your own syntax highlighted
8 Vim comes with highlighting for a couple of hundred different file types. If
9 the file you are editing isn't included, read this chapter to find out how to
10 get this type of file highlighted. Also see |:syn-define| in the reference
13 |44.1| Basic syntax commands
18 |44.6| Following groups
19 |44.7| Other arguments
21 |44.9| Including another syntax file
23 |44.11| Installing a syntax file
24 |44.12| Portable syntax file layout
26 Next chapter: |usr_45.txt| Select your language
27 Previous chapter: |usr_43.txt| Using filetypes
28 Table of contents: |usr_toc.txt|
30 ==============================================================================
31 *44.1* Basic syntax commands
33 Using an existing syntax file to start with will save you a lot of time. Try
34 finding a syntax file in $VIMRUNTIME/syntax for a language that is similar.
35 These files will also show you the normal layout of a syntax file. To
36 understand it, you need to read the following.
38 Let's start with the basic arguments. Before we start defining any new
39 syntax, we need to clear out any old definitions: >
43 This isn't required in the final syntax file, but very useful when
46 There are more simplifications in this chapter. If you are writing a syntax
47 file to be used by others, read all the way through the end to find out the
53 To check which syntax items are currently defined, use this command: >
57 You can use this to check which items have actually been defined. Quite
58 useful when you are experimenting with a new syntax file. It also shows the
59 colors used for each item, which helps to find out what is what.
60 To list the items in a specific syntax group use: >
62 :syntax list {group-name}
64 This also can be used to list clusters (explained in |44.8|). Just include
70 Some languages are not case sensitive, such as Pascal. Others, such as C, are
71 case sensitive. You need to tell which type you have with the following
76 The "match" argument means that Vim will match the case of syntax elements.
77 Therefore, "int" differs from "Int" and "INT". If the "ignore" argument is
78 used, the following are equivalent: "Procedure", "PROCEDURE" and "procedure".
79 The ":syntax case" commands can appear anywhere in a syntax file and affect
80 the syntax definitions that follow. In most cases, you have only one ":syntax
81 case" command in your syntax file; if you work with an unusual language that
82 contains both case-sensitive and non-case-sensitive elements, however, you can
83 scatter the ":syntax case" command throughout the file.
85 ==============================================================================
88 The most basic syntax elements are keywords. To define a keyword, use the
91 :syntax keyword {group} {keyword} ...
93 The {group} is the name of a syntax group. With the ":highlight" command you
94 can assign colors to a {group}. The {keyword} argument is an actual keyword.
95 Here are a few examples: >
97 :syntax keyword xType int long char
98 :syntax keyword xStatement if then else endif
100 This example uses the group names "xType" and "xStatement". By convention,
101 each group name is prefixed by the filetype for the language being defined.
102 This example defines syntax for the x language (eXample language without an
103 interesting name). In a syntax file for "csh" scripts the name "cshType"
104 would be used. Thus the prefix is equal to the value of 'filetype'.
105 These commands cause the words "int", "long" and "char" to be highlighted
106 one way and the words "if", "then", "else" and "endif" to be highlighted
107 another way. Now you need to connect the x group names to standard Vim
108 names. You do this with the following commands: >
110 :highlight link xType Type
111 :highlight link xStatement Statement
113 This tells Vim to highlight "xType" like "Type" and "xStatement" like
114 "Statement". See |group-name| for the standard names.
119 The characters used in a keyword must be in the 'iskeyword' option. If you
120 use another character, the word will never match. Vim doesn't give a warning
122 The x language uses the '-' character in keywords. This is how it's done:
124 :setlocal iskeyword+=-
125 :syntax keyword xStatement when-not
127 The ":setlocal" command is used to change 'iskeyword' only for the current
128 buffer. Still it does change the behavior of commands like "w" and "*". If
129 that is not wanted, don't define a keyword but use a match (explained in the
132 The x language allows for abbreviations. For example, "next" can be
133 abbreviated to "n", "ne" or "nex". You can define them by using this command:
135 :syntax keyword xStatement n[ext]
137 This doesn't match "nextone", keywords always match whole words only.
139 ==============================================================================
142 Consider defining something a bit more complex. You want to match ordinary
143 identifiers. To do this, you define a match syntax item. This one matches
144 any word consisting of only lowercase letters: >
146 :syntax match xIdentifier /\<\l\+\>/
149 Keywords overrule any other syntax item. Thus the keywords "if",
150 "then", etc., will be keywords, as defined with the ":syntax keyword"
151 commands above, even though they also match the pattern for
154 The part at the end is a pattern, like it's used for searching. The // is
155 used to surround the pattern (like how it's done in a ":substitute" command).
156 You can use any other character, like a plus or a quote.
158 Now define a match for a comment. In the x language it is anything from # to
161 :syntax match xComment /#.*/
163 Since you can use any search pattern, you can highlight very complex things
164 with a match item. See |pattern| for help on search patterns.
166 ==============================================================================
169 In the example x language, strings are enclosed in double quotation marks (").
170 To highlight strings you define a region. You need a region start (double
171 quote) and a region end (double quote). The definition is as follows: >
173 :syntax region xString start=/"/ end=/"/
175 The "start" and "end" directives define the patterns used to find the start
176 and end of the region. But what about strings that look like this?
178 "A string with a double quote (\") in it" ~
180 This creates a problem: The double quotation marks in the middle of the string
181 will end the region. You need to tell Vim to skip over any escaped double
182 quotes in the string. Do this with the skip keyword: >
184 :syntax region xString start=/"/ skip=/\\"/ end=/"/
186 The double backslash matches a single backslash, since the backslash is a
187 special character in search patterns.
189 When to use a region instead of a match? The main difference is that a match
190 item is a single pattern, which must match as a whole. A region starts as
191 soon as the "start" pattern matches. Whether the "end" pattern is found or
192 not doesn't matter. Thus when the item depends on the "end" pattern to match,
193 you cannot use a region. Otherwise, regions are often simpler to define. And
194 it is easier to use nested items, as is explained in the next section.
196 ==============================================================================
199 Take a look at this comment:
201 %Get input TODO: Skip white space ~
203 You want to highlight TODO in big yellow letters, even though it is in a
204 comment that is highlighted blue. To let Vim know about this, you define the
205 following syntax groups: >
207 :syntax keyword xTodo TODO contained
208 :syntax match xComment /%.*/ contains=xTodo
210 In the first line, the "contained" argument tells Vim that this keyword can
211 exist only inside another syntax item. The next line has "contains=xTodo".
212 This indicates that the xTodo syntax element is inside it. The result is that
213 the comment line as a whole is matched with "xComment" and made blue. The
214 word TODO inside it is matched by xTodo and highlighted yellow (highlighting
215 for xTodo was setup for this).
220 The x language defines code blocks in curly braces. And a code block may
221 contain other code blocks. This can be defined this way: >
223 :syntax region xBlock start=/{/ end=/}/ contains=xBlock
225 Suppose you have this text:
233 First a xBlock starts at the { in the first line. In the second line another
234 { is found. Since we are inside a xBlock item, and it contains itself, a
235 nested xBlock item will start here. Thus the "b = c" line is inside the
236 second level xBlock region. Then a } is found in the next line, which matches
237 with the end pattern of the region. This ends the nested xBlock. Because the
238 } is included in the nested region, it is hidden from the first xBlock region.
239 Then at the last } the first xBlock region ends.
244 Consider the following two syntax items: >
246 :syntax region xComment start=/%/ end=/$/ contained
247 :syntax region xPreProc start=/#/ end=/$/ contains=xComment
249 You define a comment as anything from % to the end of the line. A
250 preprocessor directive is anything from # to the end of the line. Because you
251 can have a comment on a preprocessor line, the preprocessor definition
252 includes a "contains=xComment" argument. Now look what happens with this
255 #define X = Y % Comment text ~
258 What you see is that the second line is also highlighted as xPreProc. The
259 preprocessor directive should end at the end of the line. That is why
260 you have used "end=/$/". So what is going wrong?
261 The problem is the contained comment. The comment starts with % and ends
262 at the end of the line. After the comment ends, the preprocessor syntax
263 continues. This is after the end of the line has been seen, so the next
264 line is included as well.
265 To avoid this problem and to avoid a contained syntax item eating a needed
266 end of line, use the "keepend" argument. This takes care of
267 the double end-of-line matching: >
269 :syntax region xComment start=/%/ end=/$/ contained
270 :syntax region xPreProc start=/#/ end=/$/ contains=xComment keepend
273 CONTAINING MANY ITEMS
275 You can use the contains argument to specify that everything can be contained.
278 :syntax region xList start=/\[/ end=/\]/ contains=ALL
280 All syntax items will be contained in this one. It also contains itself, but
281 not at the same position (that would cause an endless loop).
282 You can specify that some groups are not contained. Thus contain all
283 groups but the ones that are listed:
285 :syntax region xList start=/\[/ end=/\]/ contains=ALLBUT,xString
287 With the "TOP" item you can include all items that don't have a "contained"
288 argument. "CONTAINED" is used to only include items with a "contained"
289 argument. See |:syn-contains| for the details.
291 ==============================================================================
292 *44.6* Following groups
294 The x language has statements in this form:
296 if (condition) then ~
298 You want to highlight the three items differently. But "(condition)" and
299 "then" might also appear in other places, where they get different
300 highlighting. This is how you can do this: >
302 :syntax match xIf /if/ nextgroup=xIfCondition skipwhite
303 :syntax match xIfCondition /([^)]*)/ contained nextgroup=xThen skipwhite
304 :syntax match xThen /then/ contained
306 The "nextgroup" argument specifies which item can come next. This is not
307 required. If none of the items that are specified are found, nothing happens.
308 For example, in this text:
310 if not (condition) then ~
312 The "if" is matched by xIf. "not" doesn't match the specified nextgroup
313 xIfCondition, thus only the "if" is highlighted.
315 The "skipwhite" argument tells Vim that white space (spaces and tabs) may
316 appear in between the items. Similar arguments are "skipnl", which allows a
317 line break in between the items, and "skipempty", which allows empty lines.
318 Notice that "skipnl" doesn't skip an empty line, something must match after
321 ==============================================================================
322 *44.7* Other arguments
326 When you define a region, the entire region is highlighted according to the
327 group name specified. To highlight the text enclosed in parentheses () with
328 the group xInside, for example, use the following command: >
330 :syntax region xInside start=/(/ end=/)/
332 Suppose, that you want to highlight the parentheses differently. You can do
333 this with a lot of convoluted region statements, or you can use the
334 "matchgroup" argument. This tells Vim to highlight the start and end of a
335 region with a different highlight group (in this case, the xParen group): >
337 :syntax region xInside matchgroup=xParen start=/(/ end=/)/
339 The "matchgroup" argument applies to the start or end match that comes after
340 it. In the previous example both start and end are highlighted with xParen.
341 To highlight the end with xParenEnd: >
343 :syntax region xInside matchgroup=xParen start=/(/
344 \ matchgroup=xParenEnd end=/)/
346 A side effect of using "matchgroup" is that contained items will not match in
347 the start or end of the region. The example for "transparent" uses this.
352 In a C language file you would like to highlight the () text after a "while"
353 differently from the () text after a "for". In both of these there can be
354 nested () items, which should be highlighted in the same way. You must make
355 sure the () highlighting stops at the matching ). This is one way to do this:
357 :syntax region cWhile matchgroup=cWhile start=/while\s*(/ end=/)/
359 :syntax region cFor matchgroup=cFor start=/for\s*(/ end=/)/
361 :syntax region cCondNest start=/(/ end=/)/ contained transparent
363 Now you can give cWhile and cFor different highlighting. The cCondNest item
364 can appear in either of them, but take over the highlighting of the item it is
365 contained in. The "transparent" argument causes this.
366 Notice that the "matchgroup" argument has the same group as the item
367 itself. Why define it then? Well, the side effect of using a matchgroup is
368 that contained items are not found in the match with the start item then.
369 This avoids that the cCondNest group matches the ( just after the "while" or
370 "for". If this would happen, it would span the whole text until the matching
371 ) and the region would continue after it. Now cCondNest only matches after
372 the match with the start pattern, thus after the first (.
377 Suppose you want to define a region for the text between ( and ) after an
378 "if". But you don't want to include the "if" or the ( and ). You can do this
379 by specifying offsets for the patterns. Example: >
381 :syntax region xCond start=/if\s*(/ms=e+1 end=/)/me=s-1
383 The offset for the start pattern is "ms=e+1". "ms" stands for Match Start.
384 This defines an offset for the start of the match. Normally the match starts
385 where the pattern matches. "e+1" means that the match now starts at the end
386 of the pattern match, and then one character further.
387 The offset for the end pattern is "me=s-1". "me" stands for Match End.
388 "s-1" means the start of the pattern match and then one character back. The
389 result is that in this text:
393 Only the text "foo == bar" will be highlighted as xCond.
395 More about offsets here: |:syn-pattern-offset|.
400 The "oneline" argument indicates that the region does not cross a line
401 boundary. For example: >
403 :syntax region xIfThen start=/if/ end=/then/ oneline
405 This defines a region that starts at "if" and ends at "then". But if there is
406 no "then" after the "if", the region doesn't match.
409 When using "oneline" the region doesn't start if the end pattern
410 doesn't match in the same line. Without "oneline" Vim does _not_
411 check if there is a match for the end pattern. The region starts even
412 when the end pattern doesn't match in the rest of the file.
415 CONTINUATION LINES AND AVOIDING THEM
417 Things now become a little more complex. Let's define a preprocessor line.
418 This starts with a # in the first column and continues until the end of the
419 line. A line that ends with \ makes the next line a continuation line. The
420 way you handle this is to allow the syntax item to contain a continuation
423 :syntax region xPreProc start=/^#/ end=/$/ contains=xLineContinue
424 :syntax match xLineContinue "\\$" contained
426 In this case, although xPreProc normally matches a single line, the group
427 contained in it (namely xLineContinue) lets it go on for more than one line.
428 For example, it would match both of these lines:
430 #define SPAM spam spam spam \ ~
433 In this case, this is what you want. If it is not what you want, you can call
434 for the region to be on a single line by adding "excludenl" to the contained
435 pattern. For example, you want to highlight "end" in xPreProc, but only at
436 the end of the line. To avoid making the xPreProc continue on the next line,
437 like xLineContinue does, use "excludenl" like this: >
439 :syntax region xPreProc start=/^#/ end=/$/
440 \ contains=xLineContinue,xPreProcEnd
441 :syntax match xPreProcEnd excludenl /end$/ contained
442 :syntax match xLineContinue "\\$" contained
444 "excludenl" must be placed before the pattern. Since "xLineContinue" doesn't
445 have "excludenl", a match with it will extend xPreProc to the next line as
448 ==============================================================================
451 One of the things you will notice as you start to write a syntax file is that
452 you wind up generating a lot of syntax groups. Vim enables you to define a
453 collection of syntax groups called a cluster.
454 Suppose you have a language that contains for loops, if statements, while
455 loops, and functions. Each of them contains the same syntax elements: numbers
456 and identifiers. You define them like this: >
458 :syntax match xFor /^for.*/ contains=xNumber,xIdent
459 :syntax match xIf /^if.*/ contains=xNumber,xIdent
460 :syntax match xWhile /^while.*/ contains=xNumber,xIdent
462 You have to repeat the same "contains=" every time. If you want to add
463 another contained item, you have to add it three times. Syntax clusters
464 simplify these definitions by enabling you to have one cluster stand for
465 several syntax groups.
466 To define a cluster for the two items that the three groups contain, use
467 the following command: >
469 :syntax cluster xState contains=xNumber,xIdent
471 Clusters are used inside other syntax items just like any syntax group.
472 Their names start with @. Thus, you can define the three groups like this: >
474 :syntax match xFor /^for.*/ contains=@xState
475 :syntax match xIf /^if.*/ contains=@xState
476 :syntax match xWhile /^while.*/ contains=@xState
478 You can add new group names to this cluster with the "add" argument: >
480 :syntax cluster xState add=xString
482 You can remove syntax groups from this list as well: >
484 :syntax cluster xState remove=xNumber
486 ==============================================================================
487 *44.9* Including another syntax file
489 The C++ language syntax is a superset of the C language. Because you do not
490 want to write two syntax files, you can have the C++ syntax file read in the
491 one for C by using the following command: >
493 :runtime! syntax/c.vim
495 The ":runtime!" command searches 'runtimepath' for all "syntax/c.vim" files.
496 This makes the C syntax be defined like for C files. If you have replaced the
497 c.vim syntax file, or added items with an extra file, these will be loaded as
499 After loading the C syntax items the specific C++ items can be defined.
500 For example, add keywords that are not used in C: >
502 :syntax keyword cppStatement new delete this friend using
504 This works just like in any other syntax file.
506 Now consider the Perl language. It consists of two distinct parts: a
507 documentation section in POD format, and a program written in Perl itself.
508 The POD section starts with "=head" and ends with "=cut".
509 You want to define the POD syntax in one file, and use it from the Perl
510 syntax file. The ":syntax include" command reads in a syntax file and stores
511 the elements it defined in a syntax cluster. For Perl, the statements are as
514 :syntax include @Pod <sfile>:p:h/pod.vim
515 :syntax region perlPOD start=/^=head/ end=/^=cut/ contains=@Pod
517 When "=head" is found in a Perl file, the perlPOD region starts. In this
518 region the @Pod cluster is contained. All the items defined as top-level
519 items in the pod.vim syntax files will match here. When "=cut" is found, the
520 region ends and we go back to the items defined in the Perl file.
521 The ":syntax include" command is clever enough to ignore a ":syntax clear"
522 command in the included file. And an argument such as "contains=ALL" will
523 only contain items defined in the included file, not in the file that includes
525 The "<sfile>:p:h/" part uses the name of the current file (<sfile>),
526 expands it to a full path (:p) and then takes the head (:h). This results in
527 the directory name of the file. This causes the pod.vim file in the same
528 directory to be included.
530 ==============================================================================
531 *44.10* Synchronizing
533 Compilers have it easy. They start at the beginning of a file and parse it
534 straight through. Vim does not have it so easy. It must start in the middle,
535 where the editing is being done. So how does it tell where it is?
536 The secret is the ":syntax sync" command. This tells Vim how to figure out
537 where it is. For example, the following command tells Vim to scan backward
538 for the beginning or end of a C-style comment and begin syntax coloring from
541 :syntax sync ccomment
543 You can tune this processing with some arguments. The "minlines" argument
544 tells Vim the minimum number of lines to look backward, and "maxlines" tells
545 the editor the maximum number of lines to scan.
546 For example, the following command tells Vim to look at least 10 lines
547 before the top of the screen: >
549 :syntax sync ccomment minlines=10 maxlines=500
551 If it cannot figure out where it is in that space, it starts looking farther
552 and farther back until it figures out what to do. But it looks no farther
553 back than 500 lines. (A large "maxlines" slows down processing. A small one
554 might cause synchronization to fail.)
555 To make synchronizing go a bit faster, tell Vim which syntax items can be
556 skipped. Every match and region that only needs to be used when actually
557 displaying text can be given the "display" argument.
558 By default, the comment to be found will be colored as part of the Comment
559 syntax group. If you want to color things another way, you can specify a
560 different syntax group: >
562 :syntax sync ccomment xAltComment
564 If your programming language does not have C-style comments in it, you can try
565 another method of synchronization. The simplest way is to tell Vim to space
566 back a number of lines and try to figure out things from there. The following
567 command tells Vim to go back 150 lines and start parsing from there: >
569 :syntax sync minlines=150
571 A large "minlines" value can make Vim slower, especially when scrolling
572 backwards in the file.
573 Finally, you can specify a syntax group to look for by using this command:
575 :syntax sync match {sync-group-name}
576 \ grouphere {group-name} {pattern}
578 This tells Vim that when it sees {pattern} the syntax group named {group-name}
579 begins just after the pattern given. The {sync-group-name} is used to give a
580 name to this synchronization specification. For example, the sh scripting
581 language begins an if statement with "if" and ends it with "fi":
583 if [ --f file.txt ] ; then ~
587 To define a "grouphere" directive for this syntax, you use the following
590 :syntax sync match shIfSync grouphere shIf "\<if\>"
592 The "groupthere" argument tells Vim that the pattern ends a group. For
593 example, the end of the if/fi group is as follows: >
595 :syntax sync match shIfSync groupthere NONE "\<fi\>"
597 In this example, the NONE tells Vim that you are not in any special syntax
598 region. In particular, you are not inside an if block.
600 You also can define matches and regions that are with no "grouphere" or
601 "groupthere" arguments. These groups are for syntax groups skipped during
602 synchronization. For example, the following skips over anything inside {},
603 even if it would normally match another synchronization method: >
605 :syntax sync match xSpecial /{.*}/
607 More about synchronizing in the reference manual: |:syn-sync|.
609 ==============================================================================
610 *44.11* Installing a syntax file
612 When your new syntax file is ready to be used, drop it in a "syntax" directory
613 in 'runtimepath'. For Unix that would be "~/.vim/syntax".
614 The name of the syntax file must be equal to the file type, with ".vim"
615 added. Thus for the x language, the full path of the file would be:
617 ~/.vim/syntax/x.vim ~
619 You must also make the file type be recognized. See |43.2|.
621 If your file works well, you might want to make it available to other Vim
622 users. First read the next section to make sure your file works well for
623 others. Then e-mail it to the Vim maintainer: <maintainer@vim.org>. Also
624 explain how the filetype can be detected. With a bit of luck your file will
625 be included in the next Vim version!
628 ADDING TO AN EXISTING SYNTAX FILE
630 We were assuming you were adding a completely new syntax file. When an existing
631 syntax file works, but is missing some items, you can add items in a separate
632 file. That avoids changing the distributed syntax file, which will be lost
633 when installing a new version of Vim.
634 Write syntax commands in your file, possibly using group names from the
635 existing syntax. For example, to add new variable types to the C syntax file:
637 :syntax keyword cType off_t uint
639 Write the file with the same name as the original syntax file. In this case
640 "c.vim". Place it in a directory near the end of 'runtimepath'. This makes
641 it loaded after the original syntax file. For Unix this would be:
643 ~/.vim/after/syntax/c.vim ~
645 ==============================================================================
646 *44.12* Portable syntax file layout
648 Wouldn't it be nice if all Vim users exchange syntax files? To make this
649 possible, the syntax file must follow a few guidelines.
651 Start with a header that explains what the syntax file is for, who maintains
652 it and when it was last updated. Don't include too much information about
653 changes history, not many people will read it. Example: >
657 " Maintainer: Bram Moolenaar <Bram@vim.org>
658 " Last Change: 2001 Jun 18
659 " Remark: Included by the C++ syntax.
661 Use the same layout as the other syntax files. Using an existing syntax file
662 as an example will save you a lot of time.
664 Choose a good, descriptive name for your syntax file. Use lowercase letters
665 and digits. Don't make it too long, it is used in many places: The name of
666 the syntax file "name.vim", 'filetype', b:current_syntax the start of each
667 syntax group (nameType, nameStatement, nameString, etc).
669 Start with a check for "b:current_syntax". If it is defined, some other
670 syntax file, earlier in 'runtimepath' was already loaded: >
672 if exists("b:current_syntax")
676 To be compatible with Vim 5.8 use: >
680 elseif exists("b:current_syntax")
684 Set "b:current_syntax" to the name of the syntax at the end. Don't forget
685 that included files do this too, you might have to reset "b:current_syntax" if
686 you include two files.
688 If you want your syntax file to work with Vim 5.x, add a check for v:version.
689 See yacc.vim for an example.
691 Do not include anything that is a user preference. Don't set 'tabstop',
692 'expandtab', etc. These belong in a filetype plugin.
694 Do not include mappings or abbreviations. Only include setting 'iskeyword' if
695 it is really necessary for recognizing keywords.
697 To allow users select their own preferred colors, make a different group name
698 for every kind of highlighted item. Then link each of them to one of the
699 standard highlight groups. That will make it work with every color scheme.
700 If you select specific colors it will look bad with some color schemes. And
701 don't forget that some people use a different background color, or have only
702 eight colors available.
704 For the linking use "hi def link", so that the user can select different
705 highlighting before your syntax file is loaded. Example: >
707 hi def link nameString String
708 hi def link nameNumber Number
709 hi def link nameCommand Statement
712 Add the "display" argument to items that are not used when syncing, to speed
713 up scrolling backwards and CTRL-L.
715 ==============================================================================
717 Next chapter: |usr_45.txt| Select your language
719 Copyright: see |manual-copyright| vim:tw=78:ts=8:ft=help:norl: