1 *intro.txt* For Vim version 7.2b. Last change: 2008 Jun 24
4 VIM REFERENCE MANUAL by Bram Moolenaar
7 Introduction to Vim *ref* *reference*
9 1. Introduction |intro|
10 2. Vim on the internet |internet|
12 4. Notation |notation|
13 5. Modes, introduction |vim-modes-intro|
14 6. Switching from mode to mode |mode-switching|
15 7. The window contents |window-contents|
16 8. Definitions |definitions|
18 ==============================================================================
19 1. Introduction *intro*
21 Vim stands for Vi IMproved. It used to be Vi IMitation, but there are so many
22 improvements that a name change was appropriate. Vim is a text editor which
23 includes almost all the commands from the Unix program "Vi" and a lot of new
24 ones. It is very useful for editing programs and other plain text.
25 All commands are given with the keyboard. This has the advantage that you
26 can keep your fingers on the keyboard and your eyes on the screen. For those
27 who want it, there is mouse support and a GUI version with scrollbars and
28 menus (see |gui.txt|).
30 An overview of this manual can be found in the file "help.txt", |help.txt|.
31 It can be accessed from within Vim with the <Help> or <F1> key and with the
32 |:help| command (just type ":help", without the bars or quotes).
33 The 'helpfile' option can be set to the name of the help file, in case it
34 is not located in the default place. You can jump to subjects like with tags:
35 Use CTRL-] to jump to a subject under the cursor, use CTRL-T to jump back.
37 Throughout this manual the differences between Vi and Vim are mentioned in
38 curly braces, like this: {Vi does not have on-line help}. See |vi_diff.txt|
39 for a summary of the differences between Vim and Vi.
41 This manual refers to Vim on various machines. There may be small differences
42 between different computers and terminals. Besides the remarks given in this
43 document, there is a separate document for each supported system, see
46 This manual is a reference for all the Vim commands and options. This is not
47 an introduction to the use of Vi or Vim, it gets a bit complicated here and
48 there. For beginners, there is a hands-on |tutor|. To learn using Vim, read
49 the user manual |usr_toc.txt|.
52 There are many books on Vi that contain a section for beginners. There are
53 two books I can recommend:
55 "Vim - Vi Improved" by Steve Oualline
57 This is the very first book completely dedicated to Vim. It is very good for
58 beginners. The most often used commands are explained with pictures and
59 examples. The less often used commands are also explained, the more advanced
60 features are summarized. There is a comprehensive index and a quick
61 reference. Parts of this book have been included in the user manual
63 Published by New Riders Publishing. ISBN: 0735710015
64 For more information try one of these:
65 http://iccf-holland.org/click5.html
66 http://www.vim.org/iccf/click5.html
68 "Learning the Vi editor" by Linda Lamb and Arnold Robbins
70 This is a book about Vi that includes a chapter on Vim (in the sixth edition).
71 The first steps in Vi are explained very well. The commands that Vim adds are
72 only briefly mentioned. There is also a German translation.
73 Published by O'Reilly. ISBN: 1-56592-426-6.
75 ==============================================================================
76 2. Vim on the internet *internet*
78 *www* *WWW* *faq* *FAQ* *distribution* *download*
79 The Vim pages contain the most recent information about Vim. They also
80 contain links to the most recent version of Vim. The FAQ is a list of
81 Frequently Asked Questions. Read this if you have problems.
83 VIM home page: http://www.vim.org/
84 VIM FAQ: http://vimdoc.sf.net/
85 Downloading: ftp://ftp.vim.org/pub/vim/MIRRORS
88 Usenet News group where Vim is discussed: *news* *usenet*
90 This group is also for other editors. If you write about Vim, don't forget to
93 *mail-list* *maillist*
94 There are several mailing lists for Vim:
96 For discussions about using existing versions of Vim: Useful mappings,
97 questions, answers, where to get a specific version, etc. There are
98 quite a few people watching this list and answering questions, also
99 for beginners. Don't hesitate to ask your question here.
100 <vim-dev@vim.org> *vim-dev* *vimdev*
101 For discussions about changing Vim: New features, porting, patches,
102 beta-test versions, etc.
103 <vim-announce@vim.org> *vim-announce*
104 Announcements about new versions of Vim; also for beta-test versions
105 and ports to different systems. This is a read-only list.
106 <vim-multibyte@vim.org> *vim-multibyte*
107 For discussions about using and improving the multi-byte aspects of
109 <vim-mac@vim.org> *vim-mac*
110 For discussions about using and improving the Macintosh version of
113 See http://www.vim.org/maillist.php for the latest information.
116 - You can only send messages to these lists if you have subscribed!
117 - You need to send the messages from the same location as where you subscribed
118 from (to avoid spam mail).
119 - Maximum message size is 40000 characters.
122 If you want to join, send a message to
123 <vim-subscribe@vim.org>
124 Make sure that your "From:" address is correct. Then the list server will
125 give you help on how to subscribe.
128 For more information and archives look on the Vim maillist page:
129 http://www.vim.org/maillist.php
132 Bug reports: *bugs* *bug-reports* *bugreport.vim*
134 Send bug reports to: Vim bugs <bugs@vim.org>
135 This is not a maillist but the message is redirected to the Vim maintainer.
136 Please be brief; all the time that is spent on answering mail is subtracted
137 from the time that is spent on improving Vim! Always give a reproducible
138 example and try to find out which settings or other things influence the
139 appearance of the bug. Try different machines, if possible. Send me patches
142 It will help to include information about the version of Vim you are using and
143 your setup. You can get the information with this command: >
144 :so $VIMRUNTIME/bugreport.vim
145 This will create a file "bugreport.txt" in the current directory, with a lot
146 of information of your environment. Before sending this out, check if it
147 doesn't contain any confidential information!
149 If Vim crashes, please try to find out where. You can find help on this here:
152 In case of doubt or when you wonder if the problem has already been fixed but
153 you can't find a fix for it, become a member of the vim-dev maillist and ask
154 your question there. |maillist|
157 Since Vim internally doesn't use dates for editing, there is no year 2000
158 problem to worry about. Vim does use the time in the form of seconds since
159 January 1st 1970. It is used for a time-stamp check of the edited file and
160 the swap file, which is not critical and should only cause warning messages.
162 There might be a year 2038 problem, when the seconds don't fit in a 32 bit int
163 anymore. This depends on the compiler, libraries and operating system.
164 Specifically, time_t and the ctime() function are used. And the time_t is
165 stored in four bytes in the swap file. But that's only used for printing a
166 file date/time for recovery, it will never affect normal editing.
168 The Vim strftime() function directly uses the strftime() system function.
169 localtime() uses the time() system function. getftime() uses the time
170 returned by the stat() system function. If your system libraries are year
171 2000 compliant, Vim is too.
173 The user may create scripts for Vim that use external commands. These might
174 introduce Y2K problems, but those are not really part of Vim itself.
176 ==============================================================================
177 3. Credits *credits* *author* *Bram* *Moolenaar*
179 Most of Vim was written by Bram Moolenaar <Bram@vim.org>.
181 Parts of the documentation come from several Vi manuals, written by:
186 The Vim editor is based on Stevie and includes (ideas from) other software,
187 worked on by the people mentioned here. Other people helped by sending me
188 patches, suggestions and giving feedback about what is good and bad in Vim.
190 Vim would never have become what it is now, without the help of these people!
192 Ron Aaron Win32 GUI changes
193 Zoltan Arpadffy work on VMS port
195 Gert van Antwerpen changes for DJGPP on MS-DOS
196 Berkeley DB(3) ideas for swap file implementation
198 Walter Briscoe Makefile updates, various patches
199 Ralf Brown SPAWNO library for MS-DOS
200 Robert Colon many useful remarks
201 Marcin Dalecki GTK+ GUI port, toolbar icons, gettext()
202 Kayhan Demirel sent me news in Uganda
203 Chris & John Downey xvi (ideas for multi-windows version)
204 Henk Elbers first VMS port
205 Daniel Elstner GTK+ 2 port
206 Eric Fischer Mac port, 'cindent', and other improvements
207 Benji Fisher Answering lots of user questions
208 Bill Foster Athena GUI port
209 Google Lets me work on Vim one day a week
210 Loic Grenie xvim (ideas for multi windows version)
211 Sven Guckes Vim promoter and previous WWW page maintainer
212 Darren Hiebert Exuberant ctags
213 Jason Hildebrand GTK+ 2 port
214 Bruce Hunsaker improvements for VMS port
215 Andy Kahn Cscope support, GTK+ GUI port
216 Oezguer Kesim Maintainer of Vim Mailing Lists
217 Axel Kielhorn work on the Macintosh port
218 Steve Kirkendall Elvis
219 Roger Knobbe original port to Windows NT
220 Sergey Laskavy Vim's help from Moscow
221 Felix von Leitner Previous maintainer of Vim Mailing Lists
222 David Leonard Port of Python extensions to Unix
223 Avner Lottem Edit in right-to-left windows
224 Flemming Madsen X11 client-server, various features and patches
225 Microsoft Gave me a copy of DevStudio to compile Vim with
226 Paul Moore Python interface extensions, many patches
227 Katsuhito Nagano Work on multi-byte versions
228 Sung-Hyun Nam Work on multi-byte versions
229 Vince Negri Win32 GUI and generic console enhancements
230 Steve Oualline Author of the first Vim book |frombook|
231 Dominique Pelle figuring out valgrind reports and fixes
232 A.Politz Many bug reports and some fixes
233 George V. Reilly Win32 port, Win32 GUI start-off
234 Stephen Riehm bug collector
235 Stefan Roemer various patches and help to users
236 Ralf Schandl IBM OS/390 port
237 Olaf Seibert DICE and BeBox version, regexp improvements
238 Mortaza Shiran Farsi patches
239 Peter da Silva termlib
240 Paul Slootman OS/2 port
241 Henry Spencer regular expressions
242 Dany St-Amant Macintosh port
244 G. R. (Fred) Walter Stevie
245 Sven Verdoolaege Perl interface
246 Robert Webb Command-line completion, GUI versions, and
248 Ingo Wilken Tcl interface
249 Mike Williams PostScript printing
250 Juergen Weigert Lattice version, AUX improvements, UNIX and
251 MS-DOS ports, autoconf
252 Stefan 'Sec' Zehl Maintainer of vim.org
254 I wish to thank all the people that sent me bug reports and suggestions. The
255 list is too long to mention them all here. Vim would not be the same without
256 the ideas from all these people: They keep Vim alive!
259 In this documentation there are several references to other versions of Vi:
261 Vi "the original". Without further remarks this is the version
262 of Vi that appeared in Sun OS 4.x. ":version" returns
263 "Version 3.7, 6/7/85". Sometimes other versions are referred
264 to. Only runs under Unix. Source code only available with a
265 license. More information on Vi can be found through:
266 http://vi-editor.org [doesn't currently work...]
268 Posix From the IEEE standard 1003.2, Part 2: Shell and utilities.
269 Generally known as "Posix". This is a textual description of
270 how Vi is supposed to work.
271 See |posix-compliance|.
273 Nvi The "New" Vi. The version of Vi that comes with BSD 4.4 and FreeBSD.
274 Very good compatibility with the original Vi, with a few extensions.
275 The version used is 1.79. ":version" returns "Version 1.79
276 (10/23/96)". There has been no release the last few years, although
277 there is a development version 1.81.
278 Source code is freely available.
280 Elvis Another Vi clone, made by Steve Kirkendall. Very compact but isn't
282 The version used is 2.1. It is still being developed. Source code is
285 ==============================================================================
286 4. Notation *notation*
288 When syntax highlighting is used to read this, text that is not typed
289 literally is often highlighted with the Special group. These are items in [],
290 {} and <>, and CTRL-X.
292 Note that Vim uses all possible characters in commands. Sometimes the [], {}
293 and <> are part of what you type, the context should make this clear.
296 [] Characters in square brackets are optional.
298 *count* *[count]* *E489*
299 [count] An optional number that may precede the command to multiply
300 or iterate the command. If no number is given, a count of one
301 is used, unless otherwise noted. Note that in this manual the
302 [count] is not mentioned in the description of the command,
303 but only in the explanation. This was done to make the
304 commands easier to look up. If the 'showcmd' option is on,
305 the (partially) entered count is shown at the bottom of the
306 window. You can use <Del> to erase the last digit (|N<Del>|).
309 ["x] An optional register designation where text can be stored.
310 See |registers|. The x is a single character between 'a' and
311 'z' or 'A' and 'Z' or '"', and in some cases (with the put
312 command) between '0' and '9', '%', '#', or others. The
313 uppercase and lowercase letter designate the same register,
314 but the lowercase letter is used to overwrite the previous
315 register contents, while the uppercase letter is used to
316 append to the previous register contents. Without the ""x" or
317 with """" the stored text is put into the unnamed register.
320 {} Curly braces denote parts of the command which must appear,
321 but which can take a number of different values. The
322 differences between Vim and Vi are also given in curly braces
323 (this will be clear from the context).
326 {char1-char2} A single character from the range char1 to char2. For
327 example: {a-z} is a lowercase letter. Multiple ranges may be
328 concatenated. For example, {a-zA-Z0-9} is any alphanumeric
331 *{motion}* *movement*
332 {motion} A command that moves the cursor. These are explained in
333 |motion.txt|. Examples:
334 w to start of next word
335 b to begin of current word
337 /The<CR> to next occurrence of "The"
338 This is used after an |operator| command to move over the text
339 that is to be operated upon.
340 - If the motion includes a count and the operator also has a
341 count, the two counts are multiplied. For example: "2d3w"
343 - The motion can be backwards, e.g. "db" to delete to the
345 - The motion can also be a mouse click. The mouse is not
346 supported in every terminal though.
347 - The ":omap" command can be used to map characters while an
349 - Ex commands can be used to move the cursor. This can be
350 used to call a function that does some complicated motion.
351 The motion is always characterwise exclusive, no matter
352 what ":" command is used. This means it's impossible to
353 include the last character of a line without the line break
354 (unless 'virtualedit' is set).
355 If the Ex command changes the text before where the operator
356 starts or jumps to another buffer the result is
357 unpredictable. It is possible to change the text further
358 down. Jumping to another buffer is possible if the current
359 buffer is not unloaded.
362 {Visual} A selected text area. It is started with the "v", "V", or
363 CTRL-V command, then any cursor movement command can be used
364 to change the end of the selected text.
365 This is used before an |operator| command to highlight the
366 text that is to be operated upon.
370 <character> A special character from the table below, optionally with
371 modifiers, or a single ASCII character with modifiers.
374 'c' A single ASCII character.
377 CTRL-{char} {char} typed as a control character; that is, typing {char}
378 while holding the CTRL key down. The case of {char} does not
379 matter; thus CTRL-A and CTRL-a are equivalent. But on some
380 terminals, using the SHIFT key will produce another code,
384 'option' An option, or parameter, that can be set to a value, is
385 enclosed in single quotes. See |options|.
388 "command" A reference to a command that you can type is enclosed in
391 *key-notation* *key-codes* *keycodes*
392 These names for keys are used in the documentation. They can also be used
393 with the ":map" command (insert the key name by pressing CTRL-K and then the
394 key you want the name for).
396 notation meaning equivalent decimal value(s) ~
397 -----------------------------------------------------------------------
398 <Nul> zero CTRL-@ 0 (stored as 10) *<Nul>*
399 <BS> backspace CTRL-H 8 *backspace*
400 <Tab> tab CTRL-I 9 *tab* *Tab*
402 <NL> linefeed CTRL-J 10 (used for <Nul>)
403 <FF> formfeed CTRL-L 12 *formfeed*
404 <CR> carriage return CTRL-M 13 *carriage-return*
405 <Return> same as <CR> *<Return>*
406 <Enter> same as <CR> *<Enter>*
407 <Esc> escape CTRL-[ 27 *escape* *<Esc>*
408 <Space> space 32 *space*
409 <lt> less-than < 60 *<lt>*
410 <Bslash> backslash \ 92 *backslash* *<Bslash>*
411 <Bar> vertical bar | 124 *<Bar>*
413 <CSI> command sequence intro ALT-Esc 155 *<CSI>*
414 <xCSI> CSI when typed in the GUI *<xCSI>*
416 <EOL> end-of-line (can be <CR>, <LF> or <CR><LF>,
417 depends on system and 'fileformat') *<EOL>*
419 <Up> cursor-up *cursor-up* *cursor_up*
420 <Down> cursor-down *cursor-down* *cursor_down*
421 <Left> cursor-left *cursor-left* *cursor_left*
422 <Right> cursor-right *cursor-right* *cursor_right*
423 <S-Up> shift-cursor-up
424 <S-Down> shift-cursor-down
425 <S-Left> shift-cursor-left
426 <S-Right> shift-cursor-right
427 <C-Left> control-cursor-left
428 <C-Right> control-cursor-right
429 <F1> - <F12> function keys 1 to 12 *function_key* *function-key*
430 <S-F1> - <S-F12> shift-function keys 1 to 12 *<S-F1>*
436 <PageUp> page-up *page_up* *page-up*
437 <PageDown> page-down *page_down* *page-down*
438 <kHome> keypad home (upper left) *keypad-home*
439 <kEnd> keypad end (lower left) *keypad-end*
440 <kPageUp> keypad page-up (upper right) *keypad-page-up*
441 <kPageDown> keypad page-down (lower right) *keypad-page-down*
442 <kPlus> keypad + *keypad-plus*
443 <kMinus> keypad - *keypad-minus*
444 <kMultiply> keypad * *keypad-multiply*
445 <kDivide> keypad / *keypad-divide*
446 <kEnter> keypad Enter *keypad-enter*
447 <kPoint> keypad Decimal point *keypad-point*
448 <k0> - <k9> keypad 0 to 9 *keypad-0* *keypad-9*
449 <S-...> shift-key *shift* *<S-*
450 <C-...> control-key *control* *ctrl* *<C-*
451 <M-...> alt-key or meta-key *meta* *alt* *<M-*
452 <A-...> same as <M-...> *<A-*
453 <D-...> command-key (Macintosh only) *<D-*
454 <t_xx> key with "xx" entry in termcap
455 -----------------------------------------------------------------------
457 Note: The shifted cursor keys, the help key, and the undo key are only
458 available on a few terminals. On the Amiga, shifted function key 10 produces
459 a code (CSI) that is also used by key sequences. It will be recognized only
460 after typing another key.
462 Note: There are two codes for the delete key. 127 is the decimal ASCII value
463 for the delete key, which is always recognized. Some delete keys send another
464 value, in which case this value is obtained from the termcap entry "kD". Both
465 values have the same effect. Also see |:fixdel|.
467 Note: The keypad keys are used in the same way as the corresponding "normal"
468 keys. For example, <kHome> has the same effect as <Home>. If a keypad key
469 sends the same raw key code as its non-keypad equivalent, it will be
470 recognized as the non-keypad code. For example, when <kHome> sends the same
471 code as <Home>, when pressing <kHome> Vim will think <Home> was pressed.
472 Mapping <kHome> will not work then.
475 Examples are often given in the <> notation. Sometimes this is just to make
476 clear what you need to type, but often it can be typed literally, e.g., with
477 the ":map" command. The rules are:
478 1. Any printable characters are typed directly, except backslash and '<'
479 2. A backslash is represented with "\\", double backslash, or "<Bslash>".
480 3. A real '<' is represented with "\<" or "<lt>". When there is no
481 confusion possible, a '<' can be used directly.
482 4. "<key>" means the special key typed. This is the notation explained in
483 the table above. A few examples:
487 <C-LeftMouse> Control- left mouse click
488 <S-F11> Shifted function key 11
489 <M-a> Meta- a ('a' with bit 8 set)
490 <M-A> Meta- A ('A' with bit 8 set)
491 <t_kd> "kd" termcap entry (cursor down key)
493 If you want to use the full <> notation in Vim, you have to make sure the '<'
494 flag is excluded from 'cpoptions' (when 'compatible' is not set, it already is
497 The <> notation uses <lt> to escape the special meaning of key names. Using a
498 backslash also works, but only when 'cpoptions' does not include the 'B' flag.
500 Examples for mapping CTRL-H to the six characters "<Home>": >
502 :imap <C-H> <lt>Home>
503 The first one only works when the 'B' flag is not in 'cpoptions'. The second
505 To get a literal "<lt>" in a mapping: >
508 For mapping, abbreviation and menu commands you can then copy-paste the
509 examples and use them directly. Or type them literally, including the '<' and
510 '>' characters. This does NOT work for other commands, like ":set" and
513 ==============================================================================
514 5. Modes, introduction *vim-modes-intro* *vim-modes*
516 Vim has six BASIC modes:
518 *Normal* *Normal-mode* *command-mode*
519 Normal mode In Normal mode you can enter all the normal editor
520 commands. If you start the editor you are in this
521 mode (unless you have set the 'insertmode' option,
522 see below). This is also known as command mode.
524 Visual mode This is like Normal mode, but the movement commands
525 extend a highlighted area. When a non-movement
526 command is used, it is executed for the highlighted
527 area. See |Visual-mode|.
528 If the 'showmode' option is on "-- VISUAL --" is shown
529 at the bottom of the window.
531 Select mode This looks most like the MS-Windows selection mode.
532 Typing a printable character deletes the selection
533 and starts Insert mode. See |Select-mode|.
534 If the 'showmode' option is on "-- SELECT --" is shown
535 at the bottom of the window.
537 Insert mode In Insert mode the text you type is inserted into the
538 buffer. See |Insert-mode|.
539 If the 'showmode' option is on "-- INSERT --" is shown
540 at the bottom of the window.
542 Command-line mode In Command-line mode (also called Cmdline mode) you
543 Cmdline mode can enter one line of text at the bottom of the
544 window. This is for the Ex commands, ":", the pattern
545 search commands, "?" and "/", and the filter command,
548 Ex mode Like Command-line mode, but after entering a command
549 you remain in Ex mode. Very limited editing of the
550 command line. |Ex-mode|
552 There are six ADDITIONAL modes. These are variants of the BASIC modes:
554 *Operator-pending* *Operator-pending-mode*
555 Operator-pending mode This is like Normal mode, but after an operator
556 command has started, and Vim is waiting for a {motion}
557 to specify the text that the operator will work on.
559 Replace mode Replace mode is a special case of Insert mode. You
560 can do the same things as in Insert mode, but for
561 each character you enter, one character of the existing
562 text is deleted. See |Replace-mode|.
563 If the 'showmode' option is on "-- REPLACE --" is
564 shown at the bottom of the window.
566 Virtual Replace mode Virtual Replace mode is similar to Replace mode, but
567 instead of file characters you are replacing screen
568 real estate. See |Virtual-Replace-mode|.
569 If the 'showmode' option is on "-- VREPLACE --" is
570 shown at the bottom of the window.
572 Insert Normal mode Entered when CTRL-O given in Insert mode. This is
573 like Normal mode, but after executing one command Vim
574 returns to Insert mode.
575 If the 'showmode' option is on "-- (insert) --" is
576 shown at the bottom of the window.
578 Insert Visual mode Entered when starting a Visual selection from Insert
579 mode, e.g., by using CTRL-O and then "v", "V" or
580 CTRL-V. When the Visual selection ends, Vim returns
582 If the 'showmode' option is on "-- (insert) VISUAL --"
583 is shown at the bottom of the window.
585 Insert Select mode Entered when starting Select mode from Insert mode.
586 E.g., by dragging the mouse or <S-Right>.
587 When the Select mode ends, Vim returns to Insert mode.
588 If the 'showmode' option is on "-- (insert) SELECT --"
589 is shown at the bottom of the window.
591 ==============================================================================
592 6. Switching from mode to mode *mode-switching*
594 If for any reason you do not know which mode you are in, you can always get
595 back to Normal mode by typing <Esc> twice. This doesn't work for Ex mode
596 though, use ":visual".
597 You will know you are back in Normal mode when you see the screen flash or
598 hear the bell after you type <Esc>. However, when pressing <Esc> after using
599 CTRL-O in Insert mode you get a beep but you are still in Insert mode, type
604 Normal Visual Select Insert Replace Cmd-line Ex ~
606 Normal v V ^V *4 *1 R gR : / ? ! Q
607 Visual *2 ^G c C -- : --
608 Select *5 ^O ^G *6 -- -- --
609 Insert <Esc> -- -- <Insert> -- --
610 Replace <Esc> -- -- <Insert> -- --
611 Command-line *3 -- -- :start -- --
612 Ex :vi -- -- -- -- --
617 *1 Go from Normal mode to Insert mode by giving the command "i", "I", "a",
618 "A", "o", "O", "c", "C", "s" or S".
619 *2 Go from Visual mode to Normal mode by giving a non-movement command, which
620 causes the command to be executed, or by hitting <Esc> "v", "V" or "CTRL-V"
621 (see |v_v|), which just stops Visual mode without side effects.
622 *3 Go from Command-line mode to Normal mode by:
623 - Hitting <CR> or <NL>, which causes the entered command to be executed.
624 - Deleting the complete line (e.g., with CTRL-U) and giving a final <BS>.
625 - Hitting CTRL-C or <Esc>, which quits the command-line without executing
627 In the last case <Esc> may be the character defined with the 'wildchar'
628 option, in which case it will start command-line completion. You can
629 ignore that and type <Esc> again. {Vi: when hitting <Esc> the command-line
630 is executed. This is unexpected for most people; therefore it was changed
631 in Vim. But when the <Esc> is part of a mapping, the command-line is
632 executed. If you want the Vi behaviour also when typing <Esc>, use ":cmap
634 *4 Go from Normal to Select mode by:
635 - use the mouse to select text while 'selectmode' contains "mouse"
636 - use a non-printable command to move the cursor while keeping the Shift
637 key pressed, and the 'selectmode' option contains "key"
638 - use "v", "V" or "CTRL-V" while 'selectmode' contains "cmd"
639 - use "gh", "gH" or "g CTRL-H" |g_CTRL-H|
640 *5 Go from Select mode to Normal mode by using a non-printable command to move
641 the cursor, without keeping the Shift key pressed.
642 *6 Go from Select mode to Insert mode by typing a printable character. The
643 selection is deleted and the character is inserted.
645 If the 'insertmode' option is on, editing a file will start in Insert mode.
647 *CTRL-\_CTRL-N* *i_CTRL-\_CTRL-N* *c_CTRL-\_CTRL-N* *v_CTRL-\_CTRL-N*
648 Additionally the command CTRL-\ CTRL-N or <C-\><C-N> can be used to go to
649 Normal mode from any other mode. This can be used to make sure Vim is in
650 Normal mode, without causing a beep like <Esc> would. However, this does not
651 work in Ex mode. When used after a command that takes an argument, such as
652 |f| or |m|, the timeout set with 'ttimeoutlen' applies.
654 *CTRL-\_CTRL-G* *i_CTRL-\_CTRL-G* *c_CTRL-\_CTRL-G* *v_CTRL-\_CTRL-G*
655 The command CTRL-\ CTRL-G or <C-\><C-G> can be used to go to Insert mode when
656 'insertmode' is set. Otherwise it goes to Normal mode. This can be used to
657 make sure Vim is in the mode indicated by 'insertmode', without knowing in
658 what mode Vim currently is.
660 *Q* *mode-Ex* *Ex-mode* *Ex* *EX* *E501*
661 Q Switch to "Ex" mode. This is a bit like typing ":"
662 commands one after another, except:
663 - You don't have to keep pressing ":".
664 - The screen doesn't get updated after each command.
665 - There is no normal command-line editing.
666 - Mappings and abbreviations are not used.
667 In fact, you are editing the lines with the "standard"
668 line-input editing commands (<Del> or <BS> to erase,
669 CTRL-U to kill the whole line).
670 Vim will enter this mode by default if it's invoked as
671 "ex" on the command-line.
672 Use the ":vi" command |:visual| to exit "Ex" mode.
673 Note: In older versions of Vim "Q" formatted text,
674 that is now done with |gq|. But if you use the
675 |vimrc_example.vim| script "Q" works like "gq".
678 gQ Switch to "Ex" mode like with "Q", but really behave
679 like typing ":" commands after another. All command
680 line editing, completion etc. is available.
681 Use the ":vi" command |:visual| to exit "Ex" mode.
684 ==============================================================================
685 7. The window contents *window-contents*
687 In Normal mode and Insert/Replace mode the screen window will show the current
688 contents of the buffer: What You See Is What You Get. There are two
690 - When the 'cpoptions' option contains '$', and the change is within one line,
691 the text is not directly deleted, but a '$' is put at the last deleted
693 - When inserting text in one window, other windows on the same text are not
694 updated until the insert is finished.
695 {Vi: The screen is not always updated on slow terminals}
697 Lines longer than the window width will wrap, unless the 'wrap' option is off
698 (see below). The 'linebreak' option can be set to wrap at a blank character.
700 If the window has room after the last line of the buffer, Vim will show '~' in
701 the first column of the last lines in the window, like this: >
703 +-----------------------+
708 +-----------------------+
710 Thus the '~' lines indicate that the end of the buffer was reached.
712 If the last line in a window doesn't fit, Vim will indicate this with a '@' in
713 the first column of the last lines in the window, like this: >
715 +-----------------------+
720 +-----------------------+
722 Thus the '@' lines indicate that there is a line that doesn't fit in the
725 When the "lastline" flag is present in the 'display' option, you will not see
726 '@' characters at the left side of window. If the last line doesn't fit
727 completely, only the part that fits is shown, and the last three characters of
728 the last line are replaced with "@@@", like this: >
730 +-----------------------+
733 |a very long line that d|
734 |oesn't fit in the wi@@@|
735 +-----------------------+
737 If there is a single line that is too long to fit in the window, this is a
738 special situation. Vim will show only part of the line, around where the
739 cursor is. There are no special characters shown, so that you can edit all
741 {Vi: gives an "internal error" on lines that do not fit in the window}
743 The '@' occasion in the 'highlight' option can be used to set special
744 highlighting for the '@' and '~' characters. This makes it possible to
745 distinguish them from real characters in the buffer.
747 The 'showbreak' option contains the string to put in front of wrapped lines.
750 If the 'wrap' option is off, long lines will not wrap. Only the part that
751 fits on the screen is shown. If the cursor is moved to a part of the line
752 that is not shown, the screen is scrolled horizontally. The advantage of
753 this method is that columns are shown as they are and lines that cannot fit
754 on the screen can be edited. The disadvantage is that you cannot see all the
755 characters of a line at once. The 'sidescroll' option can be set to the
756 minimal number of columns to scroll. {Vi: has no 'wrap' option}
758 All normal ASCII characters are displayed directly on the screen. The <Tab>
759 is replaced with the number of spaces that it represents. Other non-printing
760 characters are replaced with "^{char}", where {char} is the non-printing
761 character with 64 added. Thus character 7 (bell) will be shown as "^G".
762 Characters between 127 and 160 are replaced with "~{char}", where {char} is
763 the character with 64 subtracted. These characters occupy more than one
764 position on the screen. The cursor can only be positioned on the first one.
766 If you set the 'number' option, all lines will be preceded with their
767 number. Tip: If you don't like wrapping lines to mix with the line numbers,
768 set the 'showbreak' option to eight spaces:
769 ":set showbreak=\ \ \ \ \ \ \ \ "
771 If you set the 'list' option, <Tab> characters will not be shown as several
772 spaces, but as "^I". A '$' will be placed at the end of the line, so you can
773 find trailing blanks.
775 In Command-line mode only the command-line itself is shown correctly. The
776 display of the buffer contents is updated as soon as you go back to Command
779 The last line of the window is used for status and other messages. The
780 status messages will only be used if an option is on:
782 status message option default Unix default ~
783 current mode 'showmode' on on
784 command characters 'showcmd' on off
785 cursor position 'ruler' off off
787 The current mode is "-- INSERT --" or "-- REPLACE --", see |'showmode'|. The
788 command characters are those that you typed but were not used yet. {Vi: does
789 not show the characters you typed or the cursor position}
791 If you have a slow terminal you can switch off the status messages to speed
795 If there is an error, an error message will be shown for at least one second
796 (in reverse video). {Vi: error messages may be overwritten with other
797 messages before you have a chance to read them}
799 Some commands show how many lines were affected. Above which threshold this
800 happens can be controlled with the 'report' option (default 2).
802 On the Amiga Vim will run in a CLI window. The name Vim and the full name of
803 the current file name will be shown in the title bar. When the window is
804 resized, Vim will automatically redraw the window. You may make the window as
805 small as you like, but if it gets too small not a single line will fit in it.
806 Make it at least 40 characters wide to be able to read most messages on the
809 On most Unix systems, resizing the window is recognized and handled correctly
812 ==============================================================================
813 8. Definitions *definitions*
815 screen The whole area that Vim uses to work in. This can be
816 a terminal emulator window. Also called "the Vim
818 window A view on a buffer.
820 A screen contains one or more windows, separated by status lines and with the
821 command line at the bottom.
823 +-------------------------------+
824 screen | window 1 | window 2 |
827 |= status line =|= status line =|
831 |==== status line ==============|
833 +-------------------------------+
835 The command line is also used for messages. It scrolls up the screen when
836 there is not enough room in the command line.
838 A difference is made between four types of lines:
840 buffer lines The lines in the buffer. This is the same as the
841 lines as they are read from/written to a file. They
842 can be thousands of characters long.
843 logical lines The buffer lines with folding applied. Buffer lines
844 in a closed fold are changed to a single logical line:
845 "+-- 99 lines folded". They can be thousands of
847 window lines The lines displayed in a window: A range of logical
848 lines with wrapping, line breaks, etc. applied. They
849 can only be as long as the width of the window allows,
850 longer lines are wrapped or truncated.
851 screen lines The lines of the screen that Vim uses. Consists of
852 the window lines of all windows, with status lines
853 and the command line added. They can only be as long
854 as the width of the screen allows. When the command
855 line gets longer it wraps and lines are scrolled to
858 buffer lines logical lines window lines screen lines ~
860 1. one 1. one 1. +-- folded 1. +-- folded
861 2. two 2. +-- folded 2. five 2. five
862 3. three 3. five 3. six 3. six
863 4. four 4. six 4. seven 4. seven
864 5. five 5. seven 5. === status line ===
868 1. aaa 1. aaa 1. aaa 9. cc
869 2. bbb 2. bbb 2. bbb 10. ddd
870 3. ccc ccc ccc 3. ccc ccc ccc 3. ccc ccc c 11. ~
871 4. ddd 4. ddd 4. cc 12. === status line ===
872 5. ddd 13. (command line)
875 ==============================================================================
876 vim:tw=78:ts=8:ft=help:norl: