src/Makefile

   1 # Makefile for Vim on Unix and Unix-like systems        vim:ts=8:sw=8:tw=78
   2 #
   3 # This Makefile is loosely based on the GNU Makefile conventions found in
   4 # standards.info.
   5 #
   6 # Compiling Vim, summary:
   7 #
   8 #       3. make
   9 #       5. make install
  10 #
  11 # Compiling Vim, details:
  12 #
  13 # Edit this file for adjusting to your system. You should not need to edit any
  14 # other file for machine specific things!
  15 # The name of this file MUST be Makefile (note the uppercase 'M').
  16 #
  17 # 1. Edit this Makefile  {{{1
  18 #       The defaults for Vim should work on most machines, but you may want to
  19 #       uncomment some lines or make other changes below to tune it to your
  20 #       system, compiler or preferences.  Uncommenting means that the '#' in
  21 #       the first column of a line is removed.
  22 #       - If you want a version of Vim that is small and starts up quickly,
  23 #         you might want to disable the GUI, X11, Perl, Python and Tcl.
  24 #       - Uncomment the line with --disable-gui if you have Motif, GTK and/or
  25 #         Athena but don't want to make gvim (the GUI version of Vim with nice
  26 #         menus and scrollbars, but makes Vim bigger and startup slower).
  27 #       - Uncomment --disable-darwin if on Mac OS X but you want to compile a
  28 #         Unix version.
  29 #       - Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but
  30 #         want to disable using X11 libraries.  This speeds up starting Vim,
  31 #         but the window title will not be set and the X11 selection can not
  32 #         used.
  33 #       - Uncomment the line "CONF_OPT_XSMP = --without-xsmp" if you have the
  34 #         X11 Session Management Protocol (XSMP) library (libSM) but do not
  35 #         want to use it.
  36 #         This can speedup Vim startup but Vim loses the ability to catch the
  37 #         user logging out from session-managers like GNOME and work
  38 #         could be lost.
  39 #       - Uncomment one or more of these lines to include an interface;
  40 #         each makes Vim quite a bit bigger:
  41 #               --enable-perlinterp     for Perl interpreter
  42 #               --enable-pythoninterp   for Python interpreter
  43 #               --enable-rubyinterp     for Ruby interpreter
  44 #               --enable-tclinterp      for Tcl interpreter
  45 #               --enable-cscope         for Cscope interface
  46 #       - Uncomment one of the lines with --with-features= to enable a set of
  47 #         features (but not the interfaces just mentioned).
  48 #       - Uncomment the line with --disable-acl to disable ACL support even
  49 #         though your system supports it.
  50 #       - Uncomment the line with --disable-gpm to disable gpm support
  51 #         even though you have gpm libraries and includes
  52 #       - Uncomment one of the lines with CFLAGS and/or CC if you have
  53 #         something very special or want to tune the optimizer.
  54 #       - Search for the name of your system to see if it needs anything
  55 #         special.
  56 #       - A few versions of make use '.include "file"' instead of 'include
  57 #         file'.  Adjust the include line below if yours does.
  58 #
  59 # 2. Edit feature.h  {{{1
  60 #       Only if you do not agree with the default compile features, e.g.:
  61 #       - you want Vim to be as vi compatible as it can be
  62 #       - you want to use Emacs tags files
  63 #       - you want right-to-left editing (Hebrew)
  64 #       - you want 'langmap' support (Greek)
  65 #       - you want to remove features to make Vim smaller
  66 #
  67 # 3. "make"  {{{1
  68 #       Will first run ./configure with the options in this file. Then it will
  69 #       start make again on this Makefile to do the compiling. You can also do
  70 #       this in two steps with:
  71 #               make config
  72 #               make
  73 #       The configuration phase creates/overwrites auto/config.h and
  74 #       auto/config.mk.
  75 #       The configure script is created with "make autoconf".  It can detect
  76 #       different features of your system and act accordingly.  However, it is
  77 #       not correct for all systems.  Check this:
  78 #       - If you have X windows, but configure could not find it or reported
  79 #         another include/library directory then you wanted to use, you have
  80 #         to set CONF_OPT_X below.  You might also check the installation of
  81 #         xmkmf.
  82 #       - If you have --enable-gui=motif and have Motif on your system, but
  83 #         configure reports "checking for location of gui... <not found>", you
  84 #         have to set GUI_INC_LOC and GUI_LIB_LOC below.
  85 #       If you changed something, do this to run configure again:
  86 #               make reconfig
  87 #
  88 #       - If you do not trust the automatic configuration code, then inspect
  89 #         auto/config.h and auto/config.mk, before starting the actual build
  90 #         phase. If possible edit this Makefile, rather than auto/config.mk --
  91 #         especially look at the definition of VIMLOC below. Note that the
  92 #         configure phase overwrites auto/config.mk and auto/config.h again.
  93 #       - If you get error messages, find out what is wrong and try to correct
  94 #         it in this Makefile. You may need to do "make reconfig" when you
  95 #         change anything that configure uses (e.g. switching from an old C
  96 #         compiler to an ANSI C compiler). Only when auto/configure does
  97 #         something wrong you may need to change one of the other files. If
  98 #         you find a clean way to fix the problem, consider sending a note to
  99 #         the author of autoconf (bug-gnu-utils@prep.ai.mit.edu) or Vim
 100 #         (Bram@vim.org). Don't bother to do that when you made a hack
 101 #         solution for a non-standard system.
 102 #
 103 # 4. "make test"  {{{1
 104 #       This is optional.  This will run Vim scripts on a number of test
 105 #       files, and compare the produced output with the expected output.
 106 #       If all is well, you will get the "ALL DONE" message in the end.  See
 107 #       below (search for "/^test").
 108 #
 109 # 5. "make install"  {{{1
 110 #       If the new Vim seems to be working OK you can install it and the
 111 #       documentation in the appropriate location. The default is
 112 #       "/usr/local".  Change "prefix" below to change the location.
 113 #       "auto/pathdef.c" will be compiled again after changing this to make
 114 #       the executable know where the help files are located.
 115 #       Note that any existing executable is removed or overwritten.  If you
 116 #       want to keep it you will have to make a backup copy first.
 117 #       The runtime files are in a different directory for each version.  You
 118 #       might want to delete an older version.
 119 #       If you don't want to install everything, there are other targets:
 120 #               make installvim         only installs Vim, not the tools
 121 #               make installvimbin      only installs the Vim executable
 122 #               make installruntime     installs most of the runtime files
 123 #               make installrtbase      only installs the Vim help and
 124 #                                                       runtime files
 125 #               make installlinks       only installs the Vim binary links
 126 #               make installmanlinks    only installs the Vim manpage links
 127 #               make installmacros      only installs the Vim macros
 128 #               make installtutorbin    only installs the Vim tutor program
 129 #               make installtutor       only installs the Vim tutor files
 130 #               make installspell       only installs the spell files
 131 #               make installtools       only installs xxd
 132 #       If you install Vim, not to install for real but to prepare a package
 133 #       or RPM, set DESTDIR to the root of the tree.
 134 #
 135 # 6. Use Vim until a new version comes out.  {{{1
 136 #
 137 # 7. "make uninstall_runtime"  {{{1
 138 #       Will remove the runtime files for the current version.  This is safe
 139 #       to use while another version is being used, only version-specific
 140 #       files will be deleted.
 141 #       To remove the runtime files of another version:
 142 #               make uninstall_runtime VIMRTDIR=/vim54
 143 #       If you want to delete all installed files, use:
 144 #               make uninstall
 145 #       Note that this will delete files that have the same name for any
 146 #       version, thus you might need to do a "make install" soon after this.
 147 #       Be careful not to remove a version of Vim that is still being used!
 148 #       To find out which files and directories will be deleted, use:
 149 #               make -n uninstall
 150 # }}}
 151 #
 152 ### This Makefile has been successfully tested on many systems. {{{
 153 ### Only the ones that require special options are mentioned here.
 154 ### Check the (*) column for remarks, listed below.
 155 ### Later code changes may cause small problems, otherwise Vim is supposed to
 156 ### compile and run without problems.
 157
 158 #system:              configurations:                version (*) tested by:
 159 #-------------        ------------------------       -------  -  ----------
 160 #AIX 3.2.5            cc (not gcc)   -                  4.5  (M) Will Fiveash
 161 #AIX 4                cc             +X11 -GUI          3.27 (4) Axel Kielhorn
 162 #AIX 4.1.4            cc             +X11 +GUI          4.5  (5) Nico Bakker
 163 #AIX 4.2.1            cc                                5.2k (C) Will Fiveash
 164 #AIX 4.3.3.12         xic 3.6.6                         5.6  (5) David R. Favor
 165 #A/UX 3.1.1           gcc            +X11               4.0  (6) Jim Jagielski
 166 #BeOS PR              mwcc DR3                          5.0n (T) Olaf Seibert
 167 #BSDI 2.1 (x86)       shlicc2 gcc-2.6.3 -X11 X11R6      4.5  (1) Jos Backus
 168 #BSD/OS 3.0 (x86)     gcc gcc-2.7.2.1 -X11 X11R6        4.6c (1) Jos Backus
 169 #CX/UX 6.2            cc             +X11 +GUI_Mofif    5.4  (V) Kipp E. Howard
 170 #DG/UX 5.4*           gcc 2.5.8      GUI                5.0e (H) Jonas Schlein
 171 #DG/UX 5.4R4.20       gcc 2.7.2      GUI                5.0s (H) Rocky Olive
 172 #HP-UX (most)         c89 cc                            5.1  (2) Bram Moolenaar
 173 #HP-UX_9.04           cc             +X11 +Motif        5.0  (2) Carton Lao
 174 #Irix 6.3 (O2)        cc             ?                  4.5  (L) Edouard Poor
 175 #Irix 6.4             cc             ?                  5.0m (S) Rick Sayre
 176 #Irix 6.5             cc             ?                  6.0  (S) David Harrison
 177 #Irix 64 bit                                            4.5  (K) Jon Wright
 178 #Linux 2.0            gcc-2.7.2      Infomagic Motif    4.3  (3) Ronald Rietman
 179 #Linux 2.0.31         gcc            +X11 +GUI Athena   5.0w (U) Darren Hiebert
 180 #LynxOS 3.0.1         2.9-gnupro-98r2 +X11 +GUI Athena  5.7.1(O) Lorenz Hahn
 181 #LynxOS 3.1.0         2.9-gnupro-98r2 +X11 +GUI Athena  5.7.1(O) Lorenz Hahn
 182 #NEC UP4800 UNIX_SV 4.2MP  cc        +X11R6 Motif,Athena4.6b (Q) Lennart Schultz
 183 #NetBSD 1.0A          gcc-2.4.5      -X11 -GUI          3.21 (X) Juergen Weigert
 184 #QNX 4.2              wcc386-10.6    -X11               4.2  (D) G.F. Desrochers
 185 #QNX 4.23             Watcom         -X11               4.2  (F) John Oleynick
 186 #SCO Unix v3.2.5      cc             +X11 Motif         3.27 (C) M. Kuperblum
 187 #SCO Open Server 5    gcc 2.7.2.3    +X11 +GUI Motif    5.3  (A) Glauber Ribeiro
 188 #SINIX-N 5.43 RM400 R4000   cc       +X11 +GUI          5.0l (I) Martin Furter
 189 #SINIX-Z 5.42 i386    gcc 2.7.2.3    +X11 +GUI Motif    5.1  (I) Joachim Fehn
 190 #SINIX-Y 5.43 RM600 R4000  gcc 2.7.2.3 +X11 +GUI Motif  5.1  (I) Joachim Fehn
 191 #Reliant/SINIX 5.44   cc             +X11 +GUI          5.5a (I) B. Pruemmer
 192 #SNI Targon31 TOS 4.1.11 gcc-2.4.5   +X11 -GUI          4.6c (B) Paul Slootman
 193 #Solaris 2.4 (Sparc)  cc             +X11 +GUI          3.29 (9) Glauber
 194 #Solaris 2.4/2.5      clcc           +X11 -GUI openwin  3.20 (7) Robert Colon
 195 #Solaris 2.5 (sun4m)  cc (SC4.0)     +X11R6 +GUI (CDE)  4.6b (E) Andrew Large
 196 #Solaris 2.5          cc             +X11 +GUI Athena   4.2  (9) Sonia Heimann
 197 #Solaris 2.5          gcc 2.5.6      +X11 Motif         5.0m (R) Ant. Colombo
 198 #Solaris 2.6          gcc 2.8.1      ncursus            5.3  (G) Larry W. Virden
 199 #Solaris with -lthread                                  5.5  (W) K. Nagano
 200 #Solaris              gcc                                    (b) Riccardo
 201 #SunOS 4.1.x                         +X11 -GUI          5.1b (J) Bram Moolenaar
 202 #SunOS 4.1.3_U1 (sun4c) gcc          +X11 +GUI Athena   5.0w (J) Darren Hiebert
 203 #SUPER-UX 6.2 (NEC SX-4) cc          +X11R6 Motif,Athena4.6b (P) Lennart Schultz
 204 #Tandem/NSK                                                  (c) Matthew Woehlke
 205 #Unisys 6035          cc             +X11 Motif         5.3  (8) Glauber Ribeiro
 206 #ESIX V4.2            cc             +X11               6.0  (a) Reinhard Wobst
 207 #Mac OS X 10.[23]     gcc            Carbon             6.2  (x) Bram Moolenaar
 208 # }}}
 209
 210 # (*)  Remarks: {{{
 211 #
 212 # (1)  Uncomment line below for shlicc2
 213 # (2)  HPUX with compile problems or wrong digraphs, uncomment line below
 214 # (3)  Infomagic Motif needs GUI_LIB_LOC and GUI_INC_LOC set, see below.
 215 #      And add "-lXpm" to MOTIF_LIBS2.
 216 # (4)  For cc the optimizer must be disabled (use CFLAGS= after running
 217 #      configure) (symptom: ":set termcap" output looks weird).
 218 # (5)  Compiler may need extra argument, see below.
 219 # (6)  See below for a few lines to uncomment
 220 # (7)  See below for lines which enable the use of clcc
 221 # (8)  Needs some EXTRA_LIBS, search for Unisys below
 222 # (9)  Needs an extra compiler flag to compile gui_at_sb.c, see below.
 223 # (A)  May need EXTRA_LIBS, see below
 224 # (B)  Can't compile GUI because there is no waitpid()...  Disable GUI below.
 225 # (C)  Force the use of curses instead of termcap, see below.
 226 # (D)  Uncomment lines below for QNX
 227 # (E)  You might want to use termlib instead of termcap, see below.
 228 # (F)  See below for instructions.
 229 # (G)  Using ncursus version 4.2 has reported to cause a crash.  Use the
 230 #      Sun cursus library instead.
 231 # (H)  See line for EXTRA_LIBS below.
 232 # (I)  SINIX-N 5.42 and 5.43 need some EXTRA_LIBS.  Also for Reliant-Unix.
 233 # (J)  If you get undefined symbols, see below for a solution.
 234 # (K)  See lines to uncomment below for machines with 64 bit pointers.
 235 # (L)  For Silicon Graphics O2 workstations remove "-lnsl" from auto/config.mk
 236 # (M)  gcc version cygnus-2.0.1 does NOT work (symptom: "dl" deletes two
 237 #      characters instead of one).
 238 # (N)  SCO with decmouse.
 239 # (O)  LynxOS needs EXTRA_LIBS, see below.
 240 # (P)  For SuperUX 6.2 on NEC SX-4 see a few lines below to uncomment.
 241 # (Q)  For UNIXSVR 4.2MP on NEC UP4800 see below for lines to uncomment.
 242 # (R)  For Solaris 2.5 (or 2.5.1) with gcc > 2.5.6, uncomment line below.
 243 # (S)  For Irix 6.x with MipsPro compiler, use -OPT:Olimit.  See line below.
 244 # (T)  See ../doc/os_beos.txt.
 245 # (U)  Must uncomment CONF_OPT_PYTHON option below to disable Python
 246 #      detection, since the configure script runs into an error when it
 247 #      detects Python (probably because of the bash shell).
 248 # (V)  See lines to uncomment below.
 249 # (X)  Need to use the .include "auto/config.mk" line below
 250 # (Y)  See line with c89 below
 251 # (Z)  See lines with cc or c89 below
 252 # (a)  See line with EXTRA_LIBS below.
 253 # (b)  When using gcc with the Solaris linker, make sure you don't use GNU
 254 #      strip, otherwise the binary may not run: "Cannot find ELF".
 255 # (c)  Add -lfloss to EXTRA_LIBS, see below.
 256 # (x)  When you get warnings for precompiled header files, run
 257 #      "sudo fixPrecomps".  Also see CONF_OPT_DARWIN below.
 258 # }}}
 259
 260
 261 #DO NOT CHANGE the next line, we need it for configure to find the compiler
 262 #instead of using the default from the "make" program.
 263 #Use a line further down to change the value for CC.
 264 CC=
 265
 266 # Change and use these defines if configure cannot find your Motif stuff.
 267 # Unfortunately there is no "standard" location for Motif. {{{
 268 # These defines can contain a single directory (recommended) or a list of
 269 # directories (for when you are working with several systems). The LAST
 270 # directory that exists is used.
 271 # When changed, run "make reconfig" next!
 272 #GUI_INC_LOC = -I/usr/include/Motif2.0 -I/usr/include/Motif1.2
 273 #GUI_LIB_LOC = -L/usr/lib/Motif2.0 -L/usr/lib/Motif1.2
 274 ### Use these two lines for Infomagic Motif (3)
 275 #GUI_INC_LOC = -I/usr/X11R6/include
 276 #GUI_LIB_LOC = -L/usr/X11R6/lib
 277 # }}}
 278
 279 ######################## auto/config.mk ######################## {{{1
 280 # At this position auto/config.mk is included. When starting from the
 281 # distribution it is almost empty. After running auto/configure it contains
 282 # settings that have been discovered for your system. Settings below this
 283 # include override settings in auto/config.mk!
 284
 285 # Note: if auto/config.mk is lost somehow (e.g., because configure was
 286 # interrupted), create an empty auto/config.mk file and do "make config".
 287
 288 # (X) How to include auto/config.mk depends on the version of "make" you have,
 289 #     if the current choice doesn't work, try the other one.
 290
 291 include auto/config.mk
 292 #.include "auto/config.mk"
 293 CClink = $(CC)
 294
 295 #}}}
 296
 297 # Include the configuration choices first, so we can override everything
 298 # below. As shipped, this file contains a target that causes to run
 299 # configure. Once configure was run, this file contains a list of
 300 # make variables with predefined values instead. Thus any second invocation
 301 # of make, will build Vim.
 302
 303 # CONFIGURE - configure arguments {{{1
 304 # You can give a lot of options to configure.
 305 # Change this to your desire and do 'make config' afterwards
 306
 307 # examples (can only use one!):
 308 #CONF_ARGS = --exec-prefix=/usr
 309 #CONF_ARGS = --with-vim-name=vim7 --with-ex-name=ex7 --with-view-name=view7
 310 #CONF_ARGS = --with-global-runtime=/etc/vim
 311
 312 # Use this one if you distribute a modified version of Vim.
 313 #CONF_ARGS = --with-modified-by="John Doe"
 314
 315 # GUI - For creating Vim with GUI (gvim) (B)
 316 # Uncomment this line when you don't want to get the GUI version, although you
 317 # have GTK, Motif and/or Athena.  Also use --without-x if you don't want X11
 318 # at all.
 319 #CONF_OPT_GUI = --disable-gui
 320
 321 # Uncomment one of these lines if you have that GUI but don't want to use it.
 322 # The automatic check will use another one that can be found.
 323 # Gnome is disabled by default, it may cause trouble.
 324 #CONF_OPT_GUI = --disable-gtk-check
 325 #CONF_OPT_GUI = --disable-gtk2-check
 326 #CONF_OPT_GUI = --enable-gnome-check
 327 #CONF_OPT_GUI = --enable-gnome2-check
 328 #CONF_OPT_GUI = --disable-motif-check
 329 #CONF_OPT_GUI = --disable-athena-check
 330 #CONF_OPT_GUI = --disable-nextaw-check
 331
 332 # Uncomment one of these lines to select a specific GUI to use.
 333 # When using "yes" or nothing, configure will use the first one found: GTK+,
 334 # Motif or Athena.
 335 #
 336 # GTK versions that are known not to work 100% are rejected.
 337 # Use "--disable-gtktest" to accept them anyway.
 338 #
 339 # GNOME means GTK with Gnome support.  If using GTK and --enable-gnome-check
 340 # is used then GNOME will automatically be used if it is found.  If you have
 341 # GNOME, but do not want to use it (e.g., want a GTK-only version), then use
 342 # --enable-gui=gtk or leave out --enable-gnome-check.
 343 #
 344 # If the selected GUI isn't found, the GUI is disabled automatically
 345 #CONF_OPT_GUI = --enable-gui=gtk
 346 #CONF_OPT_GUI = --enable-gui=gtk --disable-gtktest
 347 #CONF_OPT_GUI = --enable-gui=gtk2
 348 #CONF_OPT_GUI = --enable-gui=gtk2 --disable-gtktest
 349 #CONF_OPT_GUI = --enable-gui=gnome
 350 #CONF_OPT_GUI = --enable-gui=gnome2
 351 #CONF_OPT_GUI = --enable-gui=gnome2 --disable-gtktest
 352 #CONF_OPT_GUI = --enable-gui=motif
 353 #CONF_OPT_GUI = --enable-gui=motif --with-motif-lib="-static -lXm -shared"
 354 #CONF_OPT_GUI = --enable-gui=athena
 355 #CONF_OPT_GUI = --enable-gui=nextaw
 356
 357 # DARWIN - detecting Mac OS X
 358 # Uncomment this line when you want to compile a Unix version of Vim on
 359 # Darwin.  None of the Mac specific options or files will be used.
 360 #CONF_OPT_DARWIN = --disable-darwin
 361
 362 # Select the architecture supported.  Default is to build for the current
 363 # platform.  Use "both" for a universal binary.  That probably doesn't work
 364 # when including Perl, Python, etc.
 365 #CONF_OPT_DARWIN = --with-mac-arch=i386
 366 #CONF_OPT_DARWIN = --with-mac-arch=ppc
 367 #CONF_OPT_DARWIN = --with-mac-arch=both
 368
 369 # PERL
 370 # Uncomment this when you want to include the Perl interface.
 371 # The Perl option sometimes causes problems, because it adds extra flags
 372 # to the command line.  If you see strange flags during compilation, check in
 373 # auto/config.mk where they come from.  If it's PERL_CFLAGS, try commenting
 374 # the next line.
 375 # When you get an error for a missing "perl.exp" file, try creating an emtpy
 376 # one: "touch perl.exp".
 377 # This requires at least "small" features, "tiny" doesn't work.
 378 #CONF_OPT_PERL = --enable-perlinterp
 379
 380 # PYTHON
 381 # Uncomment this when you want to include the Python interface.
 382 # NOTE: This may cause threading to be enabled, which has side effects (such
 383 # as using different libraries and debugging becomes more difficult).
 384 # NOTE: Using this together with Perl may cause a crash in initialization.
 385 #CONF_OPT_PYTHON = --enable-pythoninterp
 386
 387 # TCL
 388 # Uncomment this when you want to include the Tcl interface.
 389 #CONF_OPT_TCL = --enable-tclinterp
 390 #CONF_OPT_TCL = --enable-tclinterp --with-tclsh=tclsh8.4
 391
 392 # RUBY
 393 # Uncomment this when you want to include the Ruby interface.
 394 #CONF_OPT_RUBY = --enable-rubyinterp
 395
 396 # MZSCHEME
 397 # Uncomment this when you want to include the MzScheme interface.
 398 #CONF_OPT_MZSCHEME = --enable-mzschemeinterp
 399 # PLT/mrscheme/drscheme Home dir; the PLTHOME environment variable also works
 400 #CONF_OPT_PLTHOME  = --with-plthome=/usr/local/plt
 401 #CONF_OPT_PLTHOME  = --with-plthome=/usr/local/drscheme
 402 #CONF_OPT_PLTHOME  = --with-plthome=/home/me/mz
 403
 404 # CSCOPE
 405 # Uncomment this when you want to include the Cscope interface.
 406 #CONF_OPT_CSCOPE = --enable-cscope
 407
 408 # WORKSHOP - Sun Visual Workshop interface.  Only works with Motif!
 409 #CONF_OPT_WORKSHOP = --enable-workshop
 410
 411 # NETBEANS - NetBeans interface. Only works with Motif, GTK, and gnome.
 412 # Motif version must have XPM libraries (see |workshop-xpm|).
 413 # Uncomment this when you do not want the netbeans interface.
 414 #CONF_OPT_NETBEANS = --disable-netbeans
 415
 416 # SNIFF - Include support for SNiFF+.
 417 #CONF_OPT_SNIFF = --enable-sniff
 418
 419 # MULTIBYTE - To edit multi-byte characters.
 420 # Uncomment this when you want to edit a multibyte language.
 421 # It's automatically enabled with big features or IME support.
 422 # Note: Compile on a machine where setlocale() actually works, otherwise the
 423 # configure tests may fail.
 424 #CONF_OPT_MULTIBYTE = --enable-multibyte
 425
 426 # NLS - National Language Support
 427 # Uncomment this when you do not want to support translated messages, even
 428 # though configure can find support for it.
 429 #CONF_OPT_NLS = --disable-nls
 430
 431 # XIM - X Input Method.  Special character input support for X11 (Chinese,
 432 # Japanese, special symbols, etc).  Also needed for dead-key support.
 433 # When omitted it's automatically enabled for the X-windows GUI.
 434 # HANGUL - Input Hangul (Korean) language using internal routines.
 435 # Uncomment one of these when you want to input a multibyte language.
 436 #CONF_OPT_INPUT = --enable-xim
 437 #CONF_OPT_INPUT = --disable-xim
 438 #CONF_OPT_INPUT = --enable-hangulinput
 439
 440 # FONTSET - X fontset support for output of languages with many characters.
 441 # Uncomment this when you want to output a multibyte language.
 442 #CONF_OPT_OUTPUT = --enable-fontset
 443
 444 # ACL - Uncomment this when you do not want to include ACL support, even
 445 # though your system does support it.  E.g., when it's buggy.
 446 #CONF_OPT_ACL = --disable-acl
 447
 448 # gpm - For mouse support on Linux console via gpm
 449 # Uncomment this when you do not want to include gpm support, even
 450 # though you have gpm libraries and includes
 451 #CONF_OPT_GPM = --disable-gpm
 452
 453 # FEATURES - For creating Vim with more or less features
 454 # Uncomment one of these lines when you want to include few to many features.
 455 # The default is "normal".
 456 #CONF_OPT_FEAT = --with-features=tiny
 457 #CONF_OPT_FEAT = --with-features=small
 458 #CONF_OPT_FEAT = --with-features=normal
 459 #CONF_OPT_FEAT = --with-features=big
 460 #CONF_OPT_FEAT = --with-features=huge
 461
 462 # COMPILED BY - For including a specific e-mail address for ":version".
 463 #CONF_OPT_COMPBY = "--with-compiledby=John Doe <JohnDoe@yahoo.com>"
 464
 465 # X WINDOWS DISABLE - For creating a plain Vim without any X11 related fancies
 466 # (otherwise Vim configure will try to include xterm titlebar access)
 467 # Also disable the GUI above, otherwise it will be included anyway.
 468 # When both GUI and X11 have been disabled this may save about 15% of the
 469 # code and make Vim startup quicker.
 470 #CONF_OPT_X = --without-x
 471
 472 # X WINDOWS DIRECTORY - specify X directories
 473 # If configure can't find you X stuff, or if you have multiple X11 derivatives
 474 # installed, you may wish to specify which one to use.
 475 # Select nothing to let configure choose.
 476 # This here selects openwin (as found on sun).
 477 #XROOT = /usr/openwin
 478 #CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib
 479
 480 # X11 Session Management Protocol support
 481 # Vim will try to use XSMP to catch the user logging out if there are unsaved
 482 # files.  Uncomment this line to disable that (it prevents vim trying to open
 483 # communications with the session manager).
 484 #CONF_OPT_XSMP = --disable-xsmp
 485
 486 # You may wish to include xsmp but use exclude xsmp-interact if the logout
 487 # XSMP functionality does not work well with your session-manager (at time of
 488 # writing, this would be early GNOME-1 gnome-session: it 'freezes' other
 489 # applications after Vim has cancelled a logout (until Vim quits).  This
 490 # *might* be the Vim code, but is more likely a bug in early GNOME-1.
 491 # This disables the dialog that asks you if you want to save files or not.
 492 #CONF_OPT_XSMP = --disable-xsmp-interact
 493
 494 # COMPILER - Name of the compiler {{{1
 495 # The default from configure will mostly be fine, no need to change this, just
 496 # an example. If a compiler is defined here, configure will use it rather than
 497 # probing for one. It is dangerous to change this after configure was run.
 498 # Make will use your choice then -- but beware: Many things may change with
 499 # another compiler.  It is wise to run 'make reconfig' to start all over
 500 # again.
 501 #CC = cc
 502 #CC = gcc
 503
 504 # COMPILER FLAGS - change as you please. Either before running {{{1
 505 # configure or afterwards. For examples see below.
 506 # When using -g with some older versions of Linux you might get a
 507 # statically linked executable.
 508 # When not defined, configure will try to use -O2 -g for gcc and -O for cc.
 509 #CFLAGS = -g
 510 #CFLAGS = -O
 511
 512 # Optimization limits - depends on the compiler.  Automatic check in configure
 513 # doesn't work very well, because many compilers only give a warning for
 514 # unrecognized arguments.
 515 #CFLAGS = -O -OPT:Olimit=2600
 516 #CFLAGS = -O -Olimit 2000
 517 #CFLAGS = -O -FOlimit,2000
 518
 519 # Often used for GCC: mixed optimizing, lot of optimizing, debugging
 520 #CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes
 521 #CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wmissing-prototypes
 522 #CFLAGS = -g -Wall -Wmissing-prototypes
 523 #CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes
 524 #CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes
 525 #CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes
 526
 527 # EFENCE - Electric-Fence malloc debugging: catches memory accesses beyond
 528 # allocated memory (and makes every malloc()/free() very slow).
 529 # Electric Fence is free (search ftp sites).
 530 # You may want to set the EF_PROTECT_BELOW environment variable to check the
 531 # other side of allocated memory.
 532 # On FreeBSD you might need to enlarge the number of mmaps allowed.  Do this
 533 # as root: sysctl -w vm.max_proc_mmap=30000
 534 #EXTRA_LIBS = /usr/local/lib/libefence.a
 535
 536 # PURIFY - remove the # to use the "purify" program (hoi Nia++!)
 537 #PURIFY = purify
 538 # }}}
 539
 540 # LINT - for running lint
 541 LINT_OPTIONS = -beprxzF
 542
 543 # PROFILING - Uncomment the next two lines to do profiling with gcc and gprof.
 544 # Might not work with GUI or Perl.
 545 # For unknown reasons adding "-lc" fixes a linking problem with GCC.  That's
 546 # probably a bug in the "-pg" implementation.
 547 # Need to recompile everything after changing this: "make clean" "make".
 548 #PROFILE_CFLAGS = -pg -g -DWE_ARE_PROFILING
 549 #PROFILE_LIBS = -pg
 550 #PROFILE_LIBS = -pg -lc
 551
 552 # MEMORY LEAK DETECTION
 553 # Requires installing the ccmalloc library.
 554 # Configuration is in the .ccmalloc or ~/.ccmalloc file.
 555 # Doesn't work very well, since memory linked to from global variables
 556 # (in libraries) is also marked as leaked memory.
 557 #PROFILE_CFLAGS = -DEXITFREE
 558 #PROFILE_LIBS = -lccmalloc
 559
 560 #####################################################
 561 ###  Specific systems, check if yours is listed!  ### {{{
 562 #####################################################
 563
 564 ### Uncomment things here only if the values chosen by configure are wrong.
 565 ### It's better to adjust configure.in and "make autoconf", if you can!
 566 ### Then send the required changes to configure.in to the bugs list.
 567
 568 ### (1) BSD/OS 2.0.1, 2.1 or 3.0 using shared libraries
 569 ###
 570 #CC = shlicc2
 571 #CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin
 572
 573 ### (2) HP-UX with a non-ANSI cc, use the c89 ANSI compiler
 574 ###     The first probably works on all systems
 575 ###     The second should work a bit better on newer systems
 576 ###     The third should work a bit better on HPUX 11.11
 577 ###     Information provided by: Richard Allen <ra@rhi.hi.is>
 578 #CC = c89 -D_HPUX_SOURCE
 579 #CC = c89 -O +Onolimit +ESlit -D_HPUX_SOURCE
 580 #CC = c89 -O +Onolimit +ESlit +e -D_HPUX_SOURCE
 581
 582 ### (2) For HP-UX: Enable the use of a different set of digraphs.  Use this
 583 ###     when the default (ISO) digraphs look completely wrong.
 584 ###     After changing this do "touch digraph.c; make".
 585 #EXTRA_DEFS = -DHPUX_DIGRAPHS
 586
 587 ### (2) For HP-UX: 9.04 cpp default macro definition table of 128000 bytes
 588 ###     is too small to compile many routines.  It produces too much defining
 589 ###     and no space errors.
 590 ###     Uncomment the following to specify a larger macro definition table.
 591 #CFLAGS = -Wp,-H256000
 592
 593 ### (2) For HP-UX 10.20 using the HP cc, with X11R6 and Motif 1.2, with
 594 ###     libraries in /usr/lib instead of /lib (avoiding transition links).
 595 ###     Information provided by: David Green
 596 #XROOT = /usr
 597 #CONF_OPT_X = --x-include=$(XROOT)/include/X11R6 --x-libraries=$(XROOT)/lib/X11R6
 598 #GUI_INC_LOC = -I/usr/include/Motif1.2
 599 #GUI_LIB_LOC = -L/usr/lib/Motif1.2_R6
 600
 601 ### (5) AIX 4.1.4 with cc
 602 #CFLAGS = -O -qmaxmem=8192
 603
 604 ###     AIX with c89 (Walter Briscoe)
 605 #CC = c89
 606 #CPPFLAGS = -D_ALL_SOURCE
 607
 608 ###     AIX 4.3.3.12 with xic 3.6.6 (David R. Favor)
 609 #       needed to avoid a problem where strings.h gets included
 610 #CFLAGS = -qsrcmsg -O2 -qmaxmem=8192 -D__STR31__
 611
 612 ### (W) Solaris with multi-threaded libraries (-lthread):
 613 ###     If suspending doesn't work properly, try using this line:
 614 #EXTRA_DEFS = -D_REENTRANT
 615
 616 ### (7) Solaris 2.4/2.5 with Centerline compiler
 617 #CC = clcc
 618 #X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib
 619 #CFLAGS = -O
 620
 621 ### (9) Solaris 2.x with cc (SunPro), using Athena.
 622 ###     Only required for compiling gui_at_sb.c.
 623 ###     Symptom: "identifier redeclared: vim_XawScrollbarSetThumb"
 624 ###     Use one of the lines (either Full ANSI or no ANSI at all)
 625 #CFLAGS = $(CFLAGS) -Xc
 626 #CFLAGS = $(CFLAGS) -Xs
 627
 628 ### Solaris 2.3 with X11 and specific cc
 629 #CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib
 630
 631 ### Solaris with /usr/ucb/cc (it is rejected by autoconf as "cc")
 632 #CC         = /usr/ucb/cc
 633 #EXTRA_LIBS = -R/usr/ucblib
 634
 635 ### Solaris with Forte Developer and FEAT_SUN_WORKSHOP
 636 # The Xpm library is available from http://koala.ilog.fr/ftp/pub/xpm.
 637 #CC             = cc
 638 #XPM_DIR                = /usr/local/xpm/xpm-3.4k-solaris
 639 #XPM_LIB                = -L$(XPM_DIR)/lib -R$(XPM_DIR)/lib -lXpm
 640 #XPM_IPATH      = -I$(XPM_DIR)/include
 641 #EXTRA_LIBS     = $(XPM_LIB)
 642 #EXTRA_IPATHS   = $(XPM_IPATH)
 643 #EXTRA_DEFS     = -xCC -DHAVE_X11_XPM_H
 644
 645 ### Solaris with workshop compilers: Vim is unstable when compiled with
 646 # "-fast".  Use this instead. (Shea Martin)
 647 #CFLAGS = -x02 -xtarget=ultra
 648
 649 ### (R) for Solaris 2.5 (or 2.5.1) with gcc > 2.5.6 you might need this:
 650 #LDFLAGS = -lw -ldl -lXmu
 651 #GUI_LIB_LOC = -L/usr/local/lib
 652
 653 ### (8) Unisys 6035 (Glauber Ribeiro)
 654 #EXTRA_LIBS = -lnsl -lsocket -lgen
 655
 656 ### When builtin functions cause problems with gcc (for Sun 4.1.x)
 657 #CFLAGS = -O2 -Wall -traditional -Wno-implicit
 658
 659 ### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0)
 660 #EXTRA_DEFS = -DDOMAIN
 661 #CFLAGS= -O -A systype,bsd4.3
 662
 663 ### Coherent 4.2.10 on Intel 386 platform
 664 #EXTRA_DEFS = -Dvoid=int
 665 #EXTRA_LIBS = -lterm -lsocket
 666
 667 ### SCO 3.2, with different library name for terminfo
 668 #EXTRA_LIBS = -ltinfo
 669
 670 ### UTS2 for Amdahl UTS 2.1.x
 671 #EXTRA_DEFS = -DUTS2
 672 #EXTRA_LIBS = -lsocket
 673
 674 ### UTS4 for Amdahl UTS 4.x
 675 #EXTRA_DEFS = -DUTS4 -Xa
 676
 677 ### USL for Unix Systems Laboratories (SYSV 4.2)
 678 #EXTRA_DEFS = -DUSL
 679
 680 ### RISCos on MIPS without X11
 681 #EXTRA_DEFS = -DMIPS
 682
 683 ### RISCos on MIPS with X11
 684 #EXTRA_LIBS = -lsun
 685
 686 ### (6)  A/UX 3.1.1 with gcc (Jim Jagielski)
 687 #CC= gcc -D_POSIX_SOURCE
 688 #CFLAGS= -O2
 689 #EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11
 690
 691 ### (A)  Some versions of SCO Open Server 5 (Jan Christiaan van Winkel)
 692 ###      Also use the CONF_TERM_LIB below!
 693 #EXTRA_LIBS = -lgen
 694
 695 ### (D)  QNX (by G.F. Desrochers)
 696 #CFLAGS = -g -O -mf -4
 697
 698 ### (F)  QNX (by John Oleynick)
 699 # 1. If you don't have an X server: Comment out CONF_OPT_GUI and uncomment
 700 #    CONF_OPT_X = --without-x.
 701 # 2. make config
 702 # 3. edit auto/config.mk and remove -ldir and -ltermcap from LIBS.  It doesn't
 703 #       have -ldir (does config find it somewhere?) and -ltermcap has at
 704 #       least one problem so I use termlib.o instead.  The problem with
 705 #       termcap is that it segfaults if you call it with the name of
 706 #       a non-existent terminal type.
 707 # 4. edit auto/config.h and add #define USE_TMPNAM
 708 # 5. add termlib.o to OBJ
 709 # 6. make
 710
 711 ### (H)  for Data general DG/UX 5.4.2 and 5.4R3.10 (Jonas J. Schlein)
 712 #EXTRA_LIBS = -lgen
 713
 714 ### (I) SINIX-N 5.42 or 5.43 RM400 R4000 (also SINIX-Y and SINIX-Z)
 715 #EXTRA_LIBS = -lgen -lnsl
 716 ###   For SINIX-Y this is needed for the right prototype of gettimeofday()
 717 #EXTRA_DEFS = -D_XPG_IV
 718
 719 ### (I) Reliant-Unix (aka SINIX) 5.44 with standard cc
 720 #       Use both "-F O3" lines for optimization or the "-g" line for debugging
 721 #EXTRA_LIBS = -lgen -lsocket -lnsl -lSM -lICE
 722 #CFLAGS = -F O3 -DSINIXN
 723 #LDFLAGS = -F O3
 724 #CFLAGS = -g -DSINIXN
 725
 726 ### (P)  SCO 3.2.42, with different termcap names for some useful keys DJB
 727 #EXTRA_DEFS = -DSCOKEYS -DNETTERM_MOUSE -DDEC_MOUSE -DXTERM_MOUSE -DHAVE_GETTIMEOFDAY
 728 #EXTRA_LIBS = -lsocket -ltermcap -lmalloc -lc_s
 729
 730 ### (P)  SuperUX 6.2 on NEC SX-4 (Lennart Schultz)
 731 #GUI_INC_LOC = -I/usr/include
 732 #GUI_LIB_LOC = -L/usr/lib
 733 #EXTRA_LIBS = -lgen
 734
 735 ### (Q) UNIXSVR 4.2MP on NEC UP4800 (Lennart Schultz)
 736 #GUI_INC_LOC = -I/usr/necccs/include
 737 #GUI_LIB_LOC = -L/usr/necccs/lib/X11R6
 738 #XROOT = /usr/necccs
 739 #CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib/X11R6
 740 #EXTRA_LIBS = -lsocket -lgen
 741
 742 ### Irix 4.0 & 5.2 (Silicon Graphics Machines, __sgi will be defined)
 743 # Not needed for Irix 5.3, Ives Aerts reported
 744 #EXTRA_LIBS = -lmalloc -lc_s
 745 # Irix 4.0, when regexp and regcmp cannot be found when linking:
 746 #EXTRA_LIBS = -lmalloc -lc_s -lPW
 747
 748 ### (S) Irix 6.x (MipsPro compiler): Uses different Olimit flag:
 749 # Note: This newer option style is used with the MipsPro compilers ONLY if
 750 #       you are compiling an "n32" or "64" ABI binary (use either a -n32
 751 #       flag or a -64 flag for CFLAGS).  If you explicitly use a -o32 flag,
 752 #       then the CFLAGS option format will be the typical style (i.e.
 753 #       -Olimit 3000).
 754 #CFLAGS = -OPT:Olimit=3000 -O
 755
 756 ### (S) Irix 6.5 with MipsPro C compiler.  Try this as a test to see new
 757 #       compiler features!  Beware, the optimization is EXTREMELY thorough
 758 #       and takes quite a long time.
 759 # Note: See the note above.  Here, the -mips3 option automatically
 760 #       enables either the "n32" or "64" ABI, depending on what machine you
 761 #       are compiling on (n32 is explicitly enabled here, just to make sure).
 762 #CFLAGS = -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush
 763 #LDFLAGS= -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush
 764
 765 ### (K) for SGI Irix machines with 64 bit pointers ("uname -s" says IRIX64)
 766 ###     Suggested by Jon Wright <jon@gate.sinica.edu.tw>.
 767 ###     Tested on R8000 IRIX6.1 Power Indigo2.
 768 ###     Check /etc/compiler.defaults for your compiler settings.
 769 # either (for 64 bit pointers) uncomment the following line
 770 #GUI_LIB_LOC = -L/usr/lib64
 771 # then
 772 # 1) make config
 773 # 2) edit auto/config.mk and delete the -lelf entry in the LIBS line
 774 # 3) make
 775 #
 776 # or (for 32bit pointers) uncomment the following line
 777 #EXTRA_DEFS = -n32
 778 #GUI_LIB_LOC = -L/usr/lib32
 779 # then
 780 # 1) make config
 781 # 2) edit auto/config.mk, add -n32 to LDFLAGS
 782 # 3) make
 783 ###
 784
 785 ### (C)  On SCO Unix v3.2.5 (and probably other versions) the termcap library,
 786 ###      which is found by configure, doesn't work correctly.  Symptom is the
 787 ###      error message "Termcap entry too long".  Uncomment the next line.
 788 ###      On AIX 4.2.1 (and other versions probably), libtermcap is reported
 789 ###      not to display properly.
 790 ### after changing this, you need to do "make reconfig".
 791 #CONF_TERM_LIB = --with-tlib=curses
 792
 793 ### (E)  If you want to use termlib library instead of the automatically found
 794 ###      one.  After changing this, you need to do "make reconfig".
 795 #CONF_TERM_LIB = --with-tlib=termlib
 796
 797 ### (a)  ESIX V4.2 (Reinhard Wobst)
 798 #EXTRA_LIBS = -lnsl -lsocket -lgen -lXIM -lXmu -lXext
 799
 800 ### (c)  Tandem/NSK (Matthew Woehlke)
 801 #EXTRA_LIBS = -lfloss
 802
 803 ### If you want to use ncurses library instead of the automatically found one
 804 ### after changing this, you need to do "make reconfig".
 805 #CONF_TERM_LIB = --with-tlib=ncurses
 806
 807 ### For GCC on MSDOS, the ".exe" suffix will be added.
 808 #EXEEXT = .exe
 809 #LNKEXT = .exe
 810
 811 ### (O)  For LynxOS 2.5.0, tested on PC.
 812 #EXTRA_LIBS = -lXext -lSM -lICE -lbsd
 813 ###      For LynxOS 3.0.1, tested on PPC
 814 #EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu -liberty -lX11
 815 ###      For LynxOS 3.1.0, tested on PC
 816 #EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu
 817
 818
 819 ### (V)  For CX/UX 6.2  (on Harris/Concurrent NightHawk 4800, 5800). Remove
 820 ###      -Qtarget if only in a 5800 environment.  (Kipp E. Howard)
 821 #CFLAGS = -O -Qtarget=m88110compat
 822 #EXTRA_LIBS = -lgen
 823
 824 ##################### end of system specific lines ################### }}}
 825
 826 ### Names of the programs and targets  {{{1
 827 VIMTARGET       = $(VIMNAME)$(EXEEXT)
 828 EXTARGET        = $(EXNAME)$(LNKEXT)
 829 VIEWTARGET      = $(VIEWNAME)$(LNKEXT)
 830 GVIMNAME        = g$(VIMNAME)
 831 GVIMTARGET      = $(GVIMNAME)$(LNKEXT)
 832 GVIEWNAME       = g$(VIEWNAME)
 833 GVIEWTARGET     = $(GVIEWNAME)$(LNKEXT)
 834 RVIMNAME        = r$(VIMNAME)
 835 RVIMTARGET      = $(RVIMNAME)$(LNKEXT)
 836 RVIEWNAME       = r$(VIEWNAME)
 837 RVIEWTARGET     = $(RVIEWNAME)$(LNKEXT)
 838 RGVIMNAME       = r$(GVIMNAME)
 839 RGVIMTARGET     = $(RGVIMNAME)$(LNKEXT)
 840 RGVIEWNAME      = r$(GVIEWNAME)
 841 RGVIEWTARGET    = $(RGVIEWNAME)$(LNKEXT)
 842 VIMDIFFNAME     = $(VIMNAME)diff
 843 GVIMDIFFNAME    = g$(VIMDIFFNAME)
 844 VIMDIFFTARGET   = $(VIMDIFFNAME)$(LNKEXT)
 845 GVIMDIFFTARGET  = $(GVIMDIFFNAME)$(LNKEXT)
 846 EVIMNAME        = e$(VIMNAME)
 847 EVIMTARGET      = $(EVIMNAME)$(LNKEXT)
 848 EVIEWNAME       = e$(VIEWNAME)
 849 EVIEWTARGET     = $(EVIEWNAME)$(LNKEXT)
 850
 851 ### Names of the tools that are also made  {{{1
 852 TOOLS = xxd/xxd$(EXEEXT)
 853
 854 ### Installation directories.  The defaults come from configure. {{{1
 855 #
 856 ### prefix      the top directory for the data (default "/usr/local")
 857 #
 858 # Uncomment the next line to install Vim in your home directory.
 859 #prefix = $(HOME)
 860
 861 ### exec_prefix is the top directory for the executable (default $(prefix))
 862 #
 863 # Uncomment the next line to install the Vim executable in "/usr/machine/bin"
 864 #exec_prefix = /usr/machine
 865
 866 ### BINDIR      dir for the executable   (default "$(exec_prefix)/bin")
 867 ### MANDIR      dir for the manual pages (default "$(prefix)/man")
 868 ### DATADIR     dir for the other files  (default "$(prefix)/lib" or
 869 #                                                 "$(prefix)/share")
 870 # They may be different when using different architectures for the
 871 # executable and a common directory for the other files.
 872 #
 873 # Uncomment the next line to install Vim in "/usr/bin"
 874 #BINDIR   = /usr/bin
 875 # Uncomment the next line to install Vim manuals in "/usr/share/man/man1"
 876 #MANDIR   = /usr/share/man
 877 # Uncomment the next line to install Vim help files in "/usr/share/vim"
 878 #DATADIR  = /usr/share
 879
 880 ### DESTDIR     root of the installation tree.  This is prepended to the other
 881 #               directories.  This directory must exist.
 882 #DESTDIR  = ~/pkg/vim
 883
 884 ### Directory of the man pages
 885 MAN1DIR = /man1
 886
 887 ### Vim version (adjusted by a script)
 888 VIMMAJOR = 7
 889 VIMMINOR = 1
 890
 891 ### Location of Vim files (should not need to be changed, and  {{{1
 892 ### some things might not work when they are changed!)
 893 VIMDIR = /vim
 894 VIMRTDIR = /vim$(VIMMAJOR)$(VIMMINOR)
 895 HELPSUBDIR = /doc
 896 COLSUBDIR = /colors
 897 SYNSUBDIR = /syntax
 898 INDSUBDIR = /indent
 899 AUTOSUBDIR = /autoload
 900 PLUGSUBDIR = /plugin
 901 FTPLUGSUBDIR = /ftplugin
 902 LANGSUBDIR = /lang
 903 COMPSUBDIR = /compiler
 904 KMAPSUBDIR = /keymap
 905 MACROSUBDIR = /macros
 906 TOOLSSUBDIR = /tools
 907 TUTORSUBDIR = /tutor
 908 SPELLSUBDIR = /spell
 909 PRINTSUBDIR = /print
 910 PODIR = po
 911
 912 ### VIMLOC      common root of the Vim files (all versions)
 913 ### VIMRTLOC    common root of the runtime Vim files (this version)
 914 ### VIMRCLOC    compiled-in location for global [g]vimrc files (all versions)
 915 ### VIMRUNTIMEDIR  compiled-in location for runtime files (optional)
 916 ### HELPSUBLOC  location for help files
 917 ### COLSUBLOC   location for colorscheme files
 918 ### SYNSUBLOC   location for syntax files
 919 ### INDSUBLOC   location for indent files
 920 ### AUTOSUBLOC  location for standard autoload files
 921 ### PLUGSUBLOC  location for standard plugin files
 922 ### FTPLUGSUBLOC  location for ftplugin files
 923 ### LANGSUBLOC  location for language files
 924 ### COMPSUBLOC  location for compiler files
 925 ### KMAPSUBLOC  location for keymap files
 926 ### MACROSUBLOC location for macro files
 927 ### TOOLSSUBLOC location for tools files
 928 ### TUTORSUBLOC location for tutor files
 929 ### SPELLSUBLOC location for spell files
 930 ### PRINTSUBLOC location for PostScript files (prolog, latin1, ..)
 931 ### SCRIPTLOC   location for script files (menu.vim, bugreport.vim, ..)
 932 ### You can override these if you want to install them somewhere else.
 933 ### Edit feature.h for compile-time settings.
 934 VIMLOC          = $(DATADIR)$(VIMDIR)
 935 VIMRTLOC        = $(DATADIR)$(VIMDIR)$(VIMRTDIR)
 936 VIMRCLOC        = $(VIMLOC)
 937 HELPSUBLOC      = $(VIMRTLOC)$(HELPSUBDIR)
 938 COLSUBLOC       = $(VIMRTLOC)$(COLSUBDIR)
 939 SYNSUBLOC       = $(VIMRTLOC)$(SYNSUBDIR)
 940 INDSUBLOC       = $(VIMRTLOC)$(INDSUBDIR)
 941 AUTOSUBLOC      = $(VIMRTLOC)$(AUTOSUBDIR)
 942 PLUGSUBLOC      = $(VIMRTLOC)$(PLUGSUBDIR)
 943 FTPLUGSUBLOC    = $(VIMRTLOC)$(FTPLUGSUBDIR)
 944 LANGSUBLOC      = $(VIMRTLOC)$(LANGSUBDIR)
 945 COMPSUBLOC      = $(VIMRTLOC)$(COMPSUBDIR)
 946 KMAPSUBLOC      = $(VIMRTLOC)$(KMAPSUBDIR)
 947 MACROSUBLOC     = $(VIMRTLOC)$(MACROSUBDIR)
 948 TOOLSSUBLOC     = $(VIMRTLOC)$(TOOLSSUBDIR)
 949 TUTORSUBLOC     = $(VIMRTLOC)$(TUTORSUBDIR)
 950 SPELLSUBLOC     = $(VIMRTLOC)$(SPELLSUBDIR)
 951 PRINTSUBLOC     = $(VIMRTLOC)$(PRINTSUBDIR)
 952 SCRIPTLOC       = $(VIMRTLOC)
 953
 954 ### Only set VIMRUNTIMEDIR when VIMRTLOC is set to a different location and
 955 ### the runtime directory is not below it.
 956 #VIMRUNTIMEDIR = $(VIMRTLOC)
 957
 958 ### Name of the evim file target.
 959 EVIM_FILE       = $(DESTDIR)$(SCRIPTLOC)/evim.vim
 960 MSWIN_FILE      = $(DESTDIR)$(SCRIPTLOC)/mswin.vim
 961
 962 ### Name of the menu file target.
 963 SYS_MENU_FILE   = $(DESTDIR)$(SCRIPTLOC)/menu.vim
 964 SYS_SYNMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/synmenu.vim
 965 SYS_DELMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/delmenu.vim
 966
 967 ### Name of the bugreport file target.
 968 SYS_BUGR_FILE   = $(DESTDIR)$(SCRIPTLOC)/bugreport.vim
 969
 970 ### Name of the file type detection file target.
 971 SYS_FILETYPE_FILE = $(DESTDIR)$(SCRIPTLOC)/filetype.vim
 972
 973 ### Name of the file type detection file target.
 974 SYS_FTOFF_FILE  = $(DESTDIR)$(SCRIPTLOC)/ftoff.vim
 975
 976 ### Name of the file type detection script file target.
 977 SYS_SCRIPTS_FILE = $(DESTDIR)$(SCRIPTLOC)/scripts.vim
 978
 979 ### Name of the ftplugin-on file target.
 980 SYS_FTPLUGIN_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugin.vim
 981
 982 ### Name of the ftplugin-off file target.
 983 SYS_FTPLUGOF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugof.vim
 984
 985 ### Name of the indent-on file target.
 986 SYS_INDENT_FILE = $(DESTDIR)$(SCRIPTLOC)/indent.vim
 987
 988 ### Name of the indent-off file target.
 989 SYS_INDOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/indoff.vim
 990
 991 ### Name of the option window script file target.
 992 SYS_OPTWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/optwin.vim
 993
 994 # Program to install the program in the target directory.  Could also be "mv".
 995 INSTALL_PROG    = cp
 996
 997 # Program to install the data in the target directory.  Cannot be "mv"!
 998 INSTALL_DATA    = cp
 999 INSTALL_DATA_R  = cp -r
1000
1001 ### Program to run on installed binary
1002 #STRIP = strip
1003
1004 ### Permissions for binaries  {{{1
1005 BINMOD = 755
1006
1007 ### Permissions for man page
1008 MANMOD = 644
1009
1010 ### Permissions for help files
1011 HELPMOD = 644
1012
1013 ### Permissions for Perl and shell scripts
1014 SCRIPTMOD = 755
1015
1016 ### Permission for Vim script files (menu.vim, bugreport.vim, ..)
1017 VIMSCRIPTMOD = 644
1018
1019 ### Permissions for all directories that are created
1020 DIRMOD = 755
1021
1022 ### Permissions for all other files that are created
1023 FILEMOD = 644
1024
1025 # Where to copy the man and help files from
1026 HELPSOURCE = ../runtime/doc
1027
1028 # Where to copy the script files from (menu, bugreport)
1029 SCRIPTSOURCE = ../runtime
1030
1031 # Where to copy the colorscheme files from
1032 COLSOURCE = ../runtime/colors
1033
1034 # Where to copy the syntax files from
1035 SYNSOURCE = ../runtime/syntax
1036
1037 # Where to copy the indent files from
1038 INDSOURCE = ../runtime/indent
1039
1040 # Where to copy the standard plugin files from
1041 AUTOSOURCE = ../runtime/autoload
1042
1043 # Where to copy the standard plugin files from
1044 PLUGSOURCE = ../runtime/plugin
1045
1046 # Where to copy the ftplugin files from
1047 FTPLUGSOURCE = ../runtime/ftplugin
1048
1049 # Where to copy the macro files from
1050 MACROSOURCE = ../runtime/macros
1051
1052 # Where to copy the tools files from
1053 TOOLSSOURCE = ../runtime/tools
1054
1055 # Where to copy the tutor files from
1056 TUTORSOURCE = ../runtime/tutor
1057
1058 # Where to copy the spell files from
1059 SPELLSOURCE = ../runtime/spell
1060
1061 # Where to look for language specific files
1062 LANGSOURCE = ../runtime/lang
1063
1064 # Where to look for compiler files
1065 COMPSOURCE = ../runtime/compiler
1066
1067 # Where to look for keymap files
1068 KMAPSOURCE = ../runtime/keymap
1069
1070 # Where to look for print resource files
1071 PRINTSOURCE = ../runtime/print
1072
1073 # If you are using Linux, you might want to use this to make vim the
1074 # default vi editor, it will create a link from vi to Vim when doing
1075 # "make install".  An existing file will be overwritten!
1076 # When not using it, some make programs can't handle an undefined $(LINKIT).
1077 #LINKIT = -ln -f -s $(BINDIR)/$(VIMTARGET) /usr/bin/vi
1078 LINKIT = @echo >/dev/null
1079
1080 ###
1081 ### GRAPHICAL USER INTERFACE (GUI).  {{{1
1082 ### 'configure --enable-gui' can enable one of these for you if you did set
1083 ### a corresponding CONF_OPT_GUI above and have X11.
1084 ### Override configures choice by uncommenting all the following lines.
1085 ### As they are, the GUI is disabled.  Replace "NONE" with "ATHENA" or "MOTIF"
1086 ### for enabling the Athena or Motif GUI.
1087 #GUI_SRC        = $(NONE_SRC)
1088 #GUI_OBJ        = $(NONE_OBJ)
1089 #GUI_DEFS       = $(NONE_DEFS)
1090 #GUI_IPATH      = $(NONE_IPATH)
1091 #GUI_LIBS_DIR   = $(NONE_LIBS_DIR)
1092 #GUI_LIBS1      = $(NONE_LIBS1)
1093 #GUI_LIBS2      = $(NONE_LIBS2)
1094 #GUI_INSTALL    = $(NONE_INSTALL)
1095 #GUI_TARGETS    = $(NONE_TARGETS)
1096 #GUI_MAN_TARGETS= $(NONE_MAN_TARGETS)
1097 #GUI_TESTTARGET = $(NONE_TESTTARGET)
1098 #GUI_BUNDLE     = $(NONE_BUNDLE)
1099
1100 # Without a GUI install the normal way.
1101 NONE_INSTALL = install_normal
1102
1103 ### GTK GUI
1104 GTK_SRC         = gui.c gui_gtk.c gui_gtk_x11.c pty.c gui_gtk_f.c \
1105                         gui_beval.c
1106 GTK_OBJ         = objects/gui.o objects/gui_gtk.o objects/gui_gtk_x11.o \
1107                         objects/pty.o objects/gui_gtk_f.o \
1108                         objects/gui_beval.o
1109 GTK_DEFS        = -DFEAT_GUI_GTK $(NARROW_PROTO)
1110 GTK_IPATH       = $(GUI_INC_LOC)
1111 GTK_LIBS_DIR    = $(GUI_LIB_LOC)
1112 GTK_LIBS1       =
1113 GTK_LIBS2       = $(GTK_LIBNAME)
1114 GTK_INSTALL     = install_normal
1115 GTK_TARGETS     = installglinks
1116 GTK_MAN_TARGETS = yes
1117 GTK_TESTTARGET  = gui
1118 GTK_BUNDLE      =
1119
1120 ### Motif GUI
1121 MOTIF_SRC       = gui.c gui_motif.c gui_x11.c pty.c gui_beval.c \
1122                         gui_xmdlg.c gui_xmebw.c
1123 MOTIF_OBJ       = objects/gui.o objects/gui_motif.o objects/gui_x11.o \
1124                         objects/pty.o objects/gui_beval.o \
1125                         objects/gui_xmdlg.o objects/gui_xmebw.o
1126 MOTIF_DEFS      = -DFEAT_GUI_MOTIF $(NARROW_PROTO)
1127 MOTIF_IPATH     = $(GUI_INC_LOC)
1128 MOTIF_LIBS_DIR  = $(GUI_LIB_LOC)
1129 MOTIF_LIBS1     =
1130 MOTIF_LIBS2     = $(MOTIF_LIBNAME) -lXt
1131 MOTIF_INSTALL   = install_normal
1132 MOTIF_TARGETS   = installglinks
1133 MOTIF_MAN_TARGETS = yes
1134 MOTIF_TESTTARGET = gui
1135 MOTIF_BUNDLE    =
1136
1137 ### Athena GUI
1138 ### Use Xaw3d to make the menus look a little bit nicer
1139 #XAW_LIB = -lXaw3d
1140 XAW_LIB = -lXaw
1141
1142 ### When using Xaw3d, uncomment/comment the following lines to also get the
1143 ### scrollbars from Xaw3d.
1144 #ATHENA_SRC     = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c
1145 #ATHENA_OBJ     = objects/gui.o objects/gui_athena.o objects/gui_x11.o \
1146 #                       objects/pty.o objects/gui_beval.o objects/gui_at_fs.o
1147 #ATHENA_DEFS    = -DFEAT_GUI_ATHENA $(NARROW_PROTO) \
1148 #                   -Dvim_scrollbarWidgetClass=scrollbarWidgetClass \
1149 #                   -Dvim_XawScrollbarSetThumb=XawScrollbarSetThumb
1150 ATHENA_SRC      = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c \
1151                         gui_at_sb.c gui_at_fs.c
1152 ATHENA_OBJ      = objects/gui.o objects/gui_athena.o objects/gui_x11.o \
1153                         objects/pty.o objects/gui_beval.o \
1154                         objects/gui_at_sb.o objects/gui_at_fs.o
1155 ATHENA_DEFS     = -DFEAT_GUI_ATHENA $(NARROW_PROTO)
1156
1157 ATHENA_IPATH    = $(GUI_INC_LOC)
1158 ATHENA_LIBS_DIR = $(GUI_LIB_LOC)
1159 ATHENA_LIBS1    = $(XAW_LIB)
1160 ATHENA_LIBS2    = -lXt
1161 ATHENA_INSTALL  = install_normal
1162 ATHENA_TARGETS  = installglinks
1163 ATHENA_MAN_TARGETS = yes
1164 ATHENA_TESTTARGET = gui
1165 ATHENA_BUNDLE   =
1166
1167 ### neXtaw GUI
1168 NEXTAW_LIB = -lneXtaw
1169
1170 NEXTAW_SRC      = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c
1171 NEXTAW_OBJ      = objects/gui.o objects/gui_athena.o objects/gui_x11.o \
1172                         objects/pty.o objects/gui_beval.o objects/gui_at_fs.o
1173 NEXTAW_DEFS     = -DFEAT_GUI_ATHENA -DFEAT_GUI_NEXTAW $(NARROW_PROTO)
1174
1175 NEXTAW_IPATH    = $(GUI_INC_LOC)
1176 NEXTAW_LIBS_DIR = $(GUI_LIB_LOC)
1177 NEXTAW_LIBS1    = $(NEXTAW_LIB)
1178 NEXTAW_LIBS2    = -lXt
1179 NEXTAW_INSTALL  =  install_normal
1180 NEXTAW_TARGETS  =  installglinks
1181 NEXTAW_MAN_TARGETS = yes
1182 NEXTAW_TESTTARGET = gui
1183 NEXTAW_BUNDLE   =
1184
1185 ### (J)  Sun OpenWindows 3.2 (SunOS 4.1.x) or earlier that produce these ld
1186 #        errors:  ld: Undefined symbol
1187 #                     _get_wmShellWidgetClass
1188 #                     _get_applicationShellWidgetClass
1189 # then you need to get patches 100512-02 and 100573-03 from Sun.  In the
1190 # meantime, uncomment the following GUI_X_LIBS definition as a workaround:
1191 #GUI_X_LIBS = -Bstatic -lXmu -Bdynamic -lXext
1192 # If you also get cos, sin etc. as undefined symbols, try uncommenting this
1193 # too:
1194 #EXTRA_LIBS = /usr/openwin/lib/libXmu.sa -lm
1195
1196 # PHOTON GUI
1197 PHOTONGUI_SRC   = gui.c gui_photon.c pty.c
1198 PHOTONGUI_OBJ   = objects/gui.o objects/gui_photon.o objects/pty.o
1199 PHOTONGUI_DEFS  = -DFEAT_GUI_PHOTON
1200 PHOTONGUI_IPATH =
1201 PHOTONGUI_LIBS_DIR =
1202 PHOTONGUI_LIBS1 = -lph -lphexlib
1203 PHOTONGUI_LIBS2 =
1204 PHOTONGUI_INSTALL = install_normal
1205 PHOTONGUI_TARGETS = installglinks
1206 PHOTONGUI_MAN_TARGETS = yes
1207 PHOTONGUI_TESTTARGET = gui
1208 PHOTONGUI_BUNDLE =
1209
1210 # CARBON GUI
1211 CARBONGUI_SRC   = gui.c gui_mac.c
1212 CARBONGUI_OBJ   = objects/gui.o objects/gui_mac.o objects/pty.o
1213 CARBONGUI_DEFS  = -DFEAT_GUI_MAC -fno-common -fpascal-strings \
1214                   -Wall -Wno-unknown-pragmas \
1215                   -mdynamic-no-pic -pipe
1216 CARBONGUI_IPATH = -I. -Iproto
1217 CARBONGUI_LIBS_DIR =
1218 CARBONGUI_LIBS1 = -framework Carbon
1219 CARBONGUI_LIBS2 =
1220 CARBONGUI_INSTALL = install_macosx
1221 CARBONGUI_TARGETS =
1222 CARBONGUI_MAN_TARGETS =
1223 CARBONGUI_TESTTARGET = gui
1224 CARBONGUI_BUNDLE = gui_bundle
1225 APPDIR = $(VIMNAME).app
1226 CARBONGUI_TESTARG = VIMPROG=../$(APPDIR)/Contents/MacOS/$(VIMTARGET)
1227
1228 # All GUI files
1229 ALL_GUI_SRC  = gui.c gui_gtk.c gui_gtk_f.c gui_motif.c gui_xmdlg.c gui_xmebw.c gui_athena.c gui_gtk_x11.c gui_x11.c gui_at_sb.c gui_at_fs.c pty.c
1230 ALL_GUI_PRO  = gui.pro gui_gtk.pro gui_motif.pro gui_xmdlg.pro gui_athena.pro gui_gtk_x11.pro gui_x11.pro gui_w16.pro gui_w32.pro gui_photon.pro
1231
1232 # }}}
1233
1234 ### Command to create dependencies based on #include "..."
1235 ### prototype headers are ignored due to -DPROTO, system
1236 ### headers #include <...> are ignored if we use the -MM option, as
1237 ### e.g. provided by gcc-cpp.
1238 ### Include FEAT_GUI to get gependency on gui.h
1239 ### Need to change "-I /<path>" to "-isystem /<path>" for GCC 3.x.
1240 CPP_DEPEND = $(CC) -I$(srcdir) -M$(CPP_MM) \
1241                 `echo "$(DEPEND_CFLAGS)" $(DEPEND_CFLAGS_FILTER)`
1242
1243 # flags for cproto
1244 #     This is for cproto 3 patchlevel 8 or below
1245 #     __inline, __attribute__ and __extension__ are not recognized by cproto
1246 #     G_IMPLEMENT_INLINES is to avoid functions defined in glib/gutils.h.
1247 NO_ATTR = -D__inline= -D__inline__= -DG_IMPLEMENT_INLINES \
1248           -D"__attribute__\\(x\\)=" -D"__asm__\\(x\\)=" \
1249           -D__extension__= -D__restrict="" \
1250           -D__gnuc_va_list=char -D__builtin_va_list=char
1251
1252 #
1253 #     This is for cproto 3 patchlevel 9 or above (currently 4.6)
1254 #     __inline and __attribute__ are now recognized by cproto
1255 #     -D"foo()=" is not supported by all compilers so do not use it
1256 # NO_ATTR=
1257 #
1258 #     maybe the "/usr/bin/cc -E" has to be adjusted for some systems
1259 # This is for cproto 3.5 patchlevel 3:
1260 # PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR)
1261 #
1262 # Use this for cproto 3 patchlevel 6 or below (use "cproto -V" to check):
1263 # PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR)
1264 #
1265 # Use this for cproto 3 patchlevel 7 or above (use "cproto -V" to check):
1266 PROTO_FLAGS = -m -M__ARGS -d -E"$(CPP)" $(NO_ATTR)
1267
1268
1269 ################################################
1270 ##   no changes required below this line      ##
1271 ################################################
1272
1273 SHELL = /bin/sh
1274
1275 .SUFFIXES:
1276 .SUFFIXES: .c .o .pro
1277
1278 PRE_DEFS = -Iproto $(DEFS) $(GUI_DEFS) $(GUI_IPATH) $(CPPFLAGS) $(EXTRA_IPATHS)
1279 POST_DEFS = $(X_CFLAGS) $(MZSCHEME_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(TCL_CFLAGS) $(RUBY_CFLAGS) $(EXTRA_DEFS)
1280
1281 ALL_CFLAGS = $(PRE_DEFS) $(CFLAGS) $(PROFILE_CFLAGS) $(POST_DEFS)
1282
1283 # Exclude $CFLAGS for osdef.sh, for Mac 10.4 some flags don't work together
1284 # with "-E".
1285 OSDEF_CFLAGS = $(PRE_DEFS) $(POST_DEFS)
1286
1287 LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) -Dinline= -D__extension__= -Dalloca=alloca
1288
1289 LINT_EXTRA = -DUSE_SNIFF -DHANGUL_INPUT -D"__attribute__(x)="
1290
1291 DEPEND_CFLAGS = -DPROTO -DDEPEND -DFEAT_GUI $(LINT_CFLAGS)
1292
1293 PFLAGS = $(PROTO_FLAGS) -DPROTO $(LINT_CFLAGS)
1294
1295 ALL_LIB_DIRS = $(GUI_LIBS_DIR) $(X_LIBS_DIR)
1296 ALL_LIBS = $(GUI_LIBS1) $(GUI_X_LIBS) $(GUI_LIBS2) $(X_PRE_LIBS) $(X_LIBS) $(X_EXTRA_LIBS) $(LIBS) $(EXTRA_LIBS) $(MZSCHEME_LIBS) $(PERL_LIBS) $(PYTHON_LIBS) $(TCL_LIBS) $(RUBY_LIBS) $(PROFILE_LIBS)
1297
1298 # abbreviations
1299 DEST_BIN = $(DESTDIR)$(BINDIR)
1300 DEST_VIM = $(DESTDIR)$(VIMLOC)
1301 DEST_RT = $(DESTDIR)$(VIMRTLOC)
1302 DEST_HELP = $(DESTDIR)$(HELPSUBLOC)
1303 DEST_COL = $(DESTDIR)$(COLSUBLOC)
1304 DEST_SYN = $(DESTDIR)$(SYNSUBLOC)
1305 DEST_IND = $(DESTDIR)$(INDSUBLOC)
1306 DEST_AUTO = $(DESTDIR)$(AUTOSUBLOC)
1307 DEST_PLUG = $(DESTDIR)$(PLUGSUBLOC)
1308 DEST_FTP = $(DESTDIR)$(FTPLUGSUBLOC)
1309 DEST_LANG = $(DESTDIR)$(LANGSUBLOC)
1310 DEST_COMP = $(DESTDIR)$(COMPSUBLOC)
1311 DEST_KMAP = $(DESTDIR)$(KMAPSUBLOC)
1312 DEST_MACRO = $(DESTDIR)$(MACROSUBLOC)
1313 DEST_TOOLS = $(DESTDIR)$(TOOLSSUBLOC)
1314 DEST_TUTOR = $(DESTDIR)$(TUTORSUBLOC)
1315 DEST_SPELL = $(DESTDIR)$(SPELLSUBLOC)
1316 DEST_SCRIPT = $(DESTDIR)$(SCRIPTLOC)
1317 DEST_PRINT = $(DESTDIR)$(PRINTSUBLOC)
1318 DEST_MAN_TOP = $(DESTDIR)$(MANDIR)
1319
1320 # We assume that the ".../man/xx/man1/" directory is for latin1 manual pages.
1321 # Some systems use UTF-8, but these should find the ".../man/xx.UTF-8/man1/"
1322 # directory first.
1323 # FreeBSD uses ".../man/xx.ISO8859-1/man1" for latin1, use that one too.
1324 DEST_MAN = $(DEST_MAN_TOP)$(MAN1DIR)
1325 DEST_MAN_FR = $(DEST_MAN_TOP)/fr$(MAN1DIR)
1326 DEST_MAN_FR_I = $(DEST_MAN_TOP)/fr.ISO8859-1$(MAN1DIR)
1327 DEST_MAN_FR_U = $(DEST_MAN_TOP)/fr.UTF-8$(MAN1DIR)
1328 DEST_MAN_IT = $(DEST_MAN_TOP)/it$(MAN1DIR)
1329 DEST_MAN_IT_I = $(DEST_MAN_TOP)/it.ISO8859-1$(MAN1DIR)
1330 DEST_MAN_IT_U = $(DEST_MAN_TOP)/it.UTF-8$(MAN1DIR)
1331 DEST_MAN_PL = $(DEST_MAN_TOP)/pl$(MAN1DIR)
1332 DEST_MAN_PL_I = $(DEST_MAN_TOP)/pl.ISO8859-2$(MAN1DIR)
1333 DEST_MAN_PL_U = $(DEST_MAN_TOP)/pl.UTF-8$(MAN1DIR)
1334 DEST_MAN_RU = $(DEST_MAN_TOP)/ru.KOI8-R$(MAN1DIR)
1335 DEST_MAN_RU_U = $(DEST_MAN_TOP)/ru.UTF-8$(MAN1DIR)
1336
1337 #            BASIC_SRC: files that are always used
1338 #              GUI_SRC: extra GUI files for current configuration
1339 #          ALL_GUI_SRC: all GUI files for Unix
1340 #
1341 #                  SRC: files used for current configuration
1342 #             TAGS_SRC: source files used for make tags
1343 #            TAGS_INCL: include files used for make tags
1344 #              ALL_SRC: source files used for make depend and make lint
1345
1346 TAGS_INCL = *.h
1347
1348 BASIC_SRC = \
1349         buffer.c \
1350         charset.c \
1351         diff.c \
1352         digraph.c \
1353         edit.c \
1354         eval.c \
1355         ex_cmds.c \
1356         ex_cmds2.c \
1357         ex_docmd.c \
1358         ex_eval.c \
1359         ex_getln.c \
1360         fileio.c \
1361         fold.c \
1362         getchar.c \
1363         hardcopy.c \
1364         hashtab.c \
1365         if_cscope.c \
1366         if_xcmdsrv.c \
1367         main.c \
1368         mark.c \
1369         memfile.c \
1370         memline.c \
1371         menu.c \
1372         message.c \
1373         misc1.c \
1374         misc2.c \
1375         move.c \
1376         mbyte.c \
1377         normal.c \
1378         ops.c \
1379         option.c \
1380         os_unix.c \
1381         auto/pathdef.c \
1382         popupmnu.c \
1383         quickfix.c \
1384         regexp.c \
1385         screen.c \
1386         search.c \
1387         spell.c \
1388         syntax.c \
1389         tag.c \
1390         term.c \
1391         ui.c \
1392         undo.c \
1393         version.c \
1394         window.c \
1395         $(OS_EXTRA_SRC)
1396
1397 SRC =   $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) $(MZSCHEME_SRC) \
1398         $(PERL_SRC) $(PYTHON_SRC) $(TCL_SRC) $(RUBY_SRC) \
1399         $(SNIFF_SRC) $(WORKSHOP_SRC) $(WSDEBUG_SRC)
1400
1401 TAGS_SRC = *.c *.cpp if_perl.xs
1402
1403 EXTRA_SRC = hangulin.c if_mzsch.c auto/if_perl.c if_perlsfio.c \
1404             if_python.c if_tcl.c if_ruby.c if_sniff.c gui_beval.c \
1405             workshop.c wsdebug.c integration.c netbeans.c
1406
1407 # All sources, also the ones that are not configured
1408 ALL_SRC = $(BASIC_SRC) $(ALL_GUI_SRC) $(EXTRA_SRC)
1409
1410 # Which files to check with lint.  Select one of these three lines.  ALL_SRC
1411 # checks more, but may not work well for checking a GUI that wasn't configured.
1412 # The perl sources also don't work well with lint.
1413 LINT_SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) $(PYTHON_SRC) $(TCL_SRC) \
1414         $(SNIFF_SRC) $(WORKSHOP_SRC) $(WSDEBUG_SRC) $(NETBEANS_SRC)
1415 #LINT_SRC = $(SRC)
1416 #LINT_SRC = $(ALL_SRC)
1417
1418 OBJ = \
1419         objects/buffer.o \
1420         objects/charset.o \
1421         objects/diff.o \
1422         objects/digraph.o \
1423         objects/edit.o \
1424         objects/eval.o \
1425         objects/ex_cmds.o \
1426         objects/ex_cmds2.o \
1427         objects/ex_docmd.o \
1428         objects/ex_eval.o \
1429         objects/ex_getln.o \
1430         objects/fileio.o \
1431         objects/fold.o \
1432         objects/getchar.o \
1433         objects/hardcopy.o \
1434         objects/hashtab.o \
1435         $(HANGULIN_OBJ) \
1436         objects/if_cscope.o \
1437         objects/if_xcmdsrv.o \
1438         objects/main.o \
1439         objects/mark.o \
1440         objects/memfile.o \
1441         objects/memline.o \
1442         objects/menu.o \
1443         objects/message.o \
1444         objects/misc1.o \
1445         objects/misc2.o \
1446         objects/move.o \
1447         objects/mbyte.o \
1448         objects/normal.o \
1449         objects/ops.o \
1450         objects/option.o \
1451         objects/os_unix.o \
1452         objects/pathdef.o \
1453         objects/popupmnu.o \
1454         objects/quickfix.o \
1455         objects/regexp.o \
1456         objects/screen.o \
1457         objects/search.o \
1458         objects/spell.o \
1459         objects/syntax.o \
1460         $(SNIFF_OBJ) \
1461         objects/tag.o \
1462         objects/term.o \
1463         objects/ui.o \
1464         objects/undo.o \
1465         objects/window.o \
1466         $(GUI_OBJ) \
1467         $(MZSCHEME_OBJ) \
1468         $(PERL_OBJ) \
1469         $(PYTHON_OBJ) \
1470         $(TCL_OBJ) \
1471         $(RUBY_OBJ) \
1472         $(OS_EXTRA_OBJ) \
1473         $(WORKSHOP_OBJ) \
1474         $(NETBEANS_OBJ) \
1475         $(WSDEBUG_OBJ)
1476
1477 PRO_AUTO = \
1478         buffer.pro \
1479         charset.pro \
1480         diff.pro \
1481         digraph.pro \
1482         edit.pro \
1483         eval.pro \
1484         ex_cmds.pro \
1485         ex_cmds2.pro \
1486         ex_docmd.pro \
1487         ex_eval.pro \
1488         ex_getln.pro \
1489         fileio.pro \
1490         fold.pro \
1491         getchar.pro \
1492         hardcopy.pro \
1493         hashtab.pro \
1494         hangulin.pro \
1495         if_cscope.pro \
1496         if_xcmdsrv.pro \
1497         if_python.pro \
1498         if_ruby.pro \
1499         main.pro \
1500         mark.pro \
1501         memfile.pro \
1502         memline.pro \
1503         menu.pro \
1504         message.pro \
1505         misc1.pro \
1506         misc2.pro \
1507         move.pro \
1508         mbyte.pro \
1509         normal.pro \
1510         ops.pro \
1511         option.pro \
1512         os_unix.pro \
1513         popupmnu.pro \
1514         quickfix.pro \
1515         regexp.pro \
1516         screen.pro \
1517         search.pro \
1518         spell.pro \
1519         syntax.pro \
1520         tag.pro \
1521         term.pro \
1522         termlib.pro \
1523         ui.pro \
1524         undo.pro \
1525         version.pro \
1526         window.pro \
1527         gui_beval.pro \
1528         workshop.pro \
1529         netbeans.pro \
1530         $(ALL_GUI_PRO) \
1531         $(TCL_PRO)
1532
1533 # Resources used for the Mac are in one directory.
1534 RSRC_DIR = os_mac_rsrc
1535
1536 PRO_MANUAL = os_amiga.pro os_msdos.pro os_win16.pro os_win32.pro \
1537         os_mswin.pro os_beos.pro os_vms.pro os_riscos.pro $(PERL_PRO)
1538
1539 # Default target is making the executable and tools
1540 all: $(VIMTARGET) $(TOOLS) languages $(GUI_BUNDLE)
1541
1542 tools: $(TOOLS)
1543
1544 # Run configure with all the setting from above.
1545 #
1546 # Note: auto/config.h doesn't depend on configure, because running configure
1547 # doesn't always update auto/config.h.  The timestamp isn't changed if the
1548 # file contents didn't change (to avoid recompiling everything).  Including a
1549 # dependency on auto/config.h would cause running configure each time when
1550 # auto/config.h isn't updated.  The dependency on auto/config.mk should make
1551 # sure configure is run when it's needed.
1552 #
1553 config auto/config.mk: auto/configure config.mk.in config.h.in
1554         GUI_INC_LOC="$(GUI_INC_LOC)" GUI_LIB_LOC="$(GUI_LIB_LOC)" \
1555                 CC="$(CC)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" \
1556                 LDFLAGS="$(LDFLAGS)" $(CONF_SHELL) srcdir="$(srcdir)" \
1557                 ./configure $(CONF_OPT_GUI) $(CONF_OPT_X) $(CONF_OPT_XSMP) \
1558                 $(CONF_OPT_DARWIN) $(CONF_OPT_PERL) $(CONF_OPT_PYTHON) \
1559                 $(CONF_OPT_TCL) $(CONF_OPT_RUBY) $(CONF_OPT_NLS) \
1560                 $(CONF_OPT_CSCOPE) $(CONF_OPT_MULTIBYTE) $(CONF_OPT_INPUT) \
1561                 $(CONF_OPT_OUTPUT) $(CONF_OPT_GPM) $(CONF_OPT_WORKSHOP) \
1562                 $(CONF_OPT_SNIFF) $(CONF_OPT_FEAT) $(CONF_TERM_LIB) \
1563                 $(CONF_OPT_COMPBY) $(CONF_OPT_ACL)  $(CONF_OPT_NETBEANS) \
1564                 $(CONF_ARGS) $(CONF_OPT_MZSCHEME) $(CONF_OPT_PLTHOME)
1565
1566 # Use "make reconfig" to rerun configure without cached values.
1567 # When config.h changes, most things will be recompiled automatically.
1568 # Invoke $(MAKE) to run config with the empty auto/config.mk.
1569 # Invoke $(MAKE) to build all with the filled auto/config.mk.
1570 reconfig: scratch clean
1571         $(MAKE) -f Makefile config
1572         $(MAKE) -f Makefile all
1573
1574 # Run autoconf to produce auto/configure.
1575 # Note:
1576 # - DO NOT RUN autoconf MANUALLY!  It will overwrite ./configure instead of
1577 #   producing auto/configure.
1578 # - autoconf is not run automatically, because a patch usually changes both
1579 #   configure.in and auto/configure but can't update the timestamps.  People
1580 #   who do not have (the correct version of) autoconf would run into trouble.
1581 #
1582 # Two tricks are required to make autoconf put its output in the "auto" dir:
1583 # - Temporarily move the ./configure script to ./configure.save.  Don't
1584 #   overwrite it, it's probably the result of an aborted autoconf.
1585 # - Use sed to change ./config.log to auto/config.log in the configure script.
1586 # Autoconf 2.5x (2.59 at least) produces a few more files that we need to take
1587 # care of:
1588 # - configure.lineno: has the line numbers replaced with $LINENO.  That
1589 #   improves patches a LOT, thus use it instead (until someone says it doesn't
1590 #   work on some system).
1591 # - autom4te.cache directory is created and not cleaned up.  Delete it.
1592 # - Uses ">config.log" instead of "./config.log".
1593 autoconf:
1594         if test ! -f configure.save; then mv configure configure.save; fi
1595         autoconf
1596         sed -e 's+>config.log+>auto/config.log+' -e 's+\./config.log+auto/config.log+' configure > auto/configure
1597         chmod 755 auto/configure
1598         mv -f configure.save configure
1599         -rm -rf autom4te.cache
1600         -rm -f auto/config.status auto/config.cache
1601
1602 # Re-execute this Makefile to include the new auto/config.mk produced by
1603 # configure Only used when typing "make" with a fresh auto/config.mk.
1604 myself:
1605         $(MAKE) -f Makefile all
1606
1607
1608 # The normal command to compile a .c file to its .o file.
1609 CCC = $(CC) -c -I$(srcdir) $(ALL_CFLAGS)
1610
1611
1612 # Link the target for normal use or debugging.
1613 # A shell script is used to try linking without unneccesary libraries.
1614 $(VIMTARGET): auto/config.mk objects $(OBJ) version.c version.h
1615         $(CCC) version.c -o objects/version.o
1616         @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \
1617                 -o $(VIMTARGET) $(OBJ) objects/version.o $(ALL_LIBS)" \
1618                 MAKE="$(MAKE)" sh $(srcdir)/link.sh
1619
1620 xxd/xxd$(EXEEXT): xxd/xxd.c
1621         cd xxd; CC="$(CC)" CFLAGS="$(CPPFLAGS) $(CFLAGS)" \
1622                 $(MAKE) -f Makefile
1623
1624 # Build the language specific files if they were unpacked.
1625 # Generate the converted .mo files separately, it's no problem if this fails.
1626 languages:
1627         @if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \
1628                 cd $(PODIR); \
1629                 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix); \
1630         fi
1631         -@if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \
1632                 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) converted; \
1633         fi
1634
1635 # Update the *.po files for changes in the sources.  Only run manually.
1636 update-po:
1637         cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) update-po
1638
1639 # Generate function prototypes.  This is not needed to compile vim, but if
1640 # you want to use it, cproto is out there on the net somewhere -- Webb
1641 #
1642 # When generating os_amiga.pro, os_msdos.pro and os_win32.pro there will be a
1643 # few include files that can not be found, that's OK.
1644
1645 proto: $(PRO_AUTO) $(PRO_MANUAL)
1646
1647 ### Would be nice if this would work for "normal" make.
1648 ### Currently it only works for (Free)BSD make.
1649 #$(PRO_AUTO): $$(*F).c
1650 #       cproto $(PFLAGS) -DFEAT_GUI $(*F).c > $@
1651
1652 # Always define FEAT_GUI.  This may generate a few warnings if it's also
1653 # defined in auto/config.h, you can ignore that.
1654 .c.pro:
1655         cproto $(PFLAGS) -DFEAT_GUI $< > proto/$@
1656         echo "/* vim: set ft=c : */" >> proto/$@
1657
1658 os_amiga.pro: os_amiga.c
1659         cproto $(PFLAGS) -DAMIGA -UHAVE_CONFIG_H -DBPTR=char* $< > proto/$@
1660         echo "/* vim: set ft=c : */" >> proto/$@
1661
1662 os_msdos.pro: os_msdos.c
1663         cproto $(PFLAGS) -DMSDOS -UHAVE_CONFIG_H $< > proto/$@
1664         echo "/* vim: set ft=c : */" >> proto/$@
1665
1666 os_win16.pro: os_win16.c
1667         cproto $(PFLAGS) -DWIN16 -UHAVE_CONFIG_H $< > proto/$@
1668         echo "/* vim: set ft=c : */" >> proto/$@
1669
1670 os_win32.pro: os_win32.c
1671         cproto $(PFLAGS) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@
1672         echo "/* vim: set ft=c : */" >> proto/$@
1673
1674 os_mswin.pro: os_mswin.c
1675         cproto $(PFLAGS) -DWIN16 -DWIN32 -UHAVE_CONFIG_H $< > proto/$@
1676         echo "/* vim: set ft=c : */" >> proto/$@
1677
1678 os_beos.pro: os_beos.c
1679         cproto $(PFLAGS) -D__BEOS__ -UHAVE_CONFIG_H $< > proto/$@
1680         echo "/* vim: set ft=c : */" >> proto/$@
1681
1682 os_vms.pro: os_vms.c
1683 # must use os_vms_conf.h for auto/config.h
1684         mv auto/config.h auto/config.h.save
1685         cp os_vms_conf.h auto/config.h
1686         cproto $(PFLAGS) -DVMS -UFEAT_GUI_ATHENA -UFEAT_GUI_NEXTAW -UFEAT_GUI_MOTIF -UFEAT_GUI_GTK $< > proto/$@
1687         echo "/* vim: set ft=c : */" >> proto/$@
1688         rm auto/config.h
1689         mv auto/config.h.save auto/config.h
1690
1691 # if_perl.pro is special: Use the generated if_perl.c for input and remove
1692 # prototypes for local functions.
1693 if_perl.pro: auto/if_perl.c
1694         cproto $(PFLAGS) -DFEAT_GUI auto/if_perl.c | sed "/_VI/d" > proto/$@
1695
1696
1697 notags:
1698         -rm -f tags
1699
1700 # Note: tags is made for the currently configured version, can't include both
1701 #       Motif and Athena GUI
1702 # You can ignore error messages for missing files.
1703 tags TAGS: notags
1704         $(TAGPRG) $(TAGS_SRC) $(TAGS_INCL)
1705
1706 # Make a highlight file for types.  Requires Exuberant ctags and awk
1707 types: types.vim
1708 types.vim: $(TAGS_SRC) $(TAGS_INCL)
1709         ctags --c-kinds=gstu -o- $(TAGS_SRC) $(TAGS_INCL) |\
1710                 awk 'BEGIN{printf("syntax keyword Type\t")}\
1711                         {printf("%s ", $$1)}END{print ""}' > $@
1712
1713 # Execute the test scripts.  Run these after compiling Vim, before installing.
1714 # This doesn't depend on $(VIMTARGET), because that won't work when configure
1715 # wasn't run yet.  Restart make to build it instead.
1716 #
1717 # This will produce a lot of garbage on your screen, including a few error
1718 # messages.  Don't worry about that.
1719 # If there is a real error, there will be a difference between "test.out" and
1720 # a "test99.ok" file.
1721 # If everything is alright, the final message will be "ALL DONE".
1722 #
1723 test check:
1724         $(MAKE) -f Makefile $(VIMTARGET)
1725         -if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \
1726                 cd $(PODIR); $(MAKE) -f Makefile check VIM=../$(VIMTARGET); \
1727         fi
1728         -if test $(VIMTARGET) != vim -a ! -e vim; then \
1729                 ln -s $(VIMTARGET) vim; \
1730         fi
1731         cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) $(GUI_TESTARG)
1732
1733 testclean:
1734         cd testdir; $(MAKE) -f Makefile clean
1735         if test -d $(PODIR); then \
1736                 cd $(PODIR); $(MAKE) checkclean; \
1737         fi
1738
1739 #
1740 # Avoid overwriting an existing executable, somebody might be running it and
1741 # overwriting it could cause it to crash.  Deleting it is OK, it won't be
1742 # really deleted until all running processes for it have exited.  It is
1743 # renamed first, in case the deleting doesn't work.
1744 #
1745 # If you want to keep an older version, rename it before running "make
1746 # install".
1747 #
1748 install: $(GUI_INSTALL)
1749
1750 install_normal: installvim installtools $(INSTALL_LANGS) install-icons
1751
1752 installvim: installvimbin installtutorbin \
1753                 installruntime installlinks installmanlinks
1754
1755 installvimbin: $(VIMTARGET) $(DESTDIR)$(exec_prefix) $(DEST_BIN)
1756         -if test -f $(DEST_BIN)/$(VIMTARGET); then \
1757           mv -f $(DEST_BIN)/$(VIMTARGET) $(DEST_BIN)/$(VIMNAME).rm; \
1758           rm -f $(DEST_BIN)/$(VIMNAME).rm; \
1759         fi
1760         $(INSTALL_PROG) $(VIMTARGET) $(DEST_BIN)
1761         $(STRIP) $(DEST_BIN)/$(VIMTARGET)
1762         chmod $(BINMOD) $(DEST_BIN)/$(VIMTARGET)
1763 # may create a link to the new executable from /usr/bin/vi
1764         -$(LINKIT)
1765
1766 # Long list of arguments for the shell script that installs the manual pages
1767 # for one language.
1768 INSTALLMANARGS = $(VIMLOC) $(SCRIPTLOC) $(VIMRCLOC) $(HELPSOURCE) $(MANMOD) \
1769                 $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME)
1770
1771 # Install most of the runtime files
1772 installruntime: installrtbase installmacros installtutor installspell
1773
1774 # install the help files; first adjust the contents for the final location
1775 installrtbase: $(HELPSOURCE)/vim.1 $(DEST_VIM) $(DEST_RT) \
1776                 $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) \
1777                 $(DEST_FTP) $(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG) \
1778                 $(DEST_TUTOR) $(DEST_SPELL) $(DEST_COMP)
1779         -$(SHELL) ./installman.sh install $(DEST_MAN) "" $(INSTALLMANARGS)
1780         @echo generating help tags
1781 # Generate the help tags with ":helptags" to handle all languages.
1782         -@cd $(HELPSOURCE); $(MAKE) VIMEXE=$(DEST_BIN)/$(VIMTARGET) vimtags
1783         cd $(HELPSOURCE); \
1784                 files=`ls *.txt tags`; \
1785                 files="$$files `ls *.??x tags-?? 2>/dev/null || true`"; \
1786                 $(INSTALL_DATA) $$files  $(DEST_HELP); \
1787                 cd $(DEST_HELP); \
1788                 chmod $(HELPMOD) $$files
1789         $(INSTALL_DATA)  $(HELPSOURCE)/*.pl $(DEST_HELP)
1790         chmod $(SCRIPTMOD) $(DEST_HELP)/*.pl
1791 # install the menu files
1792         $(INSTALL_DATA) $(SCRIPTSOURCE)/menu.vim $(SYS_MENU_FILE)
1793         chmod $(VIMSCRIPTMOD) $(SYS_MENU_FILE)
1794         $(INSTALL_DATA) $(SCRIPTSOURCE)/synmenu.vim $(SYS_SYNMENU_FILE)
1795         chmod $(VIMSCRIPTMOD) $(SYS_SYNMENU_FILE)
1796         $(INSTALL_DATA) $(SCRIPTSOURCE)/delmenu.vim $(SYS_DELMENU_FILE)
1797         chmod $(VIMSCRIPTMOD) $(SYS_DELMENU_FILE)
1798 # install the evim file
1799         $(INSTALL_DATA) $(SCRIPTSOURCE)/mswin.vim $(MSWIN_FILE)
1800         chmod $(VIMSCRIPTMOD) $(MSWIN_FILE)
1801         $(INSTALL_DATA) $(SCRIPTSOURCE)/evim.vim $(EVIM_FILE)
1802         chmod $(VIMSCRIPTMOD) $(EVIM_FILE)
1803 # install the bugreport file
1804         $(INSTALL_DATA) $(SCRIPTSOURCE)/bugreport.vim $(SYS_BUGR_FILE)
1805         chmod $(VIMSCRIPTMOD) $(SYS_BUGR_FILE)
1806 # install the example vimrc files
1807         $(INSTALL_DATA) $(SCRIPTSOURCE)/vimrc_example.vim $(DEST_SCRIPT)
1808         chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/vimrc_example.vim
1809         $(INSTALL_DATA) $(SCRIPTSOURCE)/gvimrc_example.vim $(DEST_SCRIPT)
1810         chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/gvimrc_example.vim
1811 # install the file type detection files
1812         $(INSTALL_DATA) $(SCRIPTSOURCE)/filetype.vim $(SYS_FILETYPE_FILE)
1813         chmod $(VIMSCRIPTMOD) $(SYS_FILETYPE_FILE)
1814         $(INSTALL_DATA) $(SCRIPTSOURCE)/ftoff.vim $(SYS_FTOFF_FILE)
1815         chmod $(VIMSCRIPTMOD) $(SYS_FTOFF_FILE)
1816         $(INSTALL_DATA) $(SCRIPTSOURCE)/scripts.vim $(SYS_SCRIPTS_FILE)
1817         chmod $(VIMSCRIPTMOD) $(SYS_SCRIPTS_FILE)
1818         $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugin.vim $(SYS_FTPLUGIN_FILE)
1819         chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGIN_FILE)
1820         $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugof.vim $(SYS_FTPLUGOF_FILE)
1821         chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGOF_FILE)
1822         $(INSTALL_DATA) $(SCRIPTSOURCE)/indent.vim $(SYS_INDENT_FILE)
1823         chmod $(VIMSCRIPTMOD) $(SYS_INDENT_FILE)
1824         $(INSTALL_DATA) $(SCRIPTSOURCE)/indoff.vim $(SYS_INDOFF_FILE)
1825         chmod $(VIMSCRIPTMOD) $(SYS_INDOFF_FILE)
1826         $(INSTALL_DATA) $(SCRIPTSOURCE)/optwin.vim $(SYS_OPTWIN_FILE)
1827         chmod $(VIMSCRIPTMOD) $(SYS_OPTWIN_FILE)
1828 # install the print resource files
1829         cd $(PRINTSOURCE); $(INSTALL_DATA) *.ps $(DEST_PRINT)
1830         cd $(DEST_PRINT); chmod $(FILEMOD) *.ps
1831 # install the colorscheme files
1832         cd $(COLSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COL)
1833         cd $(DEST_COL); chmod $(HELPMOD) *.vim README.txt
1834 # install the syntax files
1835         cd $(SYNSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_SYN)
1836         cd $(DEST_SYN); chmod $(HELPMOD) *.vim README.txt
1837 # install the indent files
1838         cd $(INDSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_IND)
1839         cd $(DEST_IND); chmod $(HELPMOD) *.vim README.txt
1840 # install the standard autoload files
1841         cd $(AUTOSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_AUTO)
1842         cd $(DEST_AUTO); chmod $(HELPMOD) *.vim README.txt
1843         cd $(AUTOSOURCE)/xml; $(INSTALL_DATA) *.vim $(DEST_AUTO)/xml
1844         cd $(DEST_AUTO)/xml; chmod $(HELPMOD) *.vim
1845 # install the standard plugin files
1846         cd $(PLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_PLUG)
1847         cd $(DEST_PLUG); chmod $(HELPMOD) *.vim README.txt
1848 # install the ftplugin files
1849         cd $(FTPLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_FTP)
1850         cd $(DEST_FTP); chmod $(HELPMOD) *.vim README.txt
1851 # install the compiler files
1852         cd $(COMPSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COMP)
1853         cd $(DEST_COMP); chmod $(HELPMOD) *.vim README.txt
1854
1855 installmacros: $(DEST_VIM) $(DEST_RT) $(DEST_MACRO)
1856         $(INSTALL_DATA_R) $(MACROSOURCE)/* $(DEST_MACRO)
1857         chmod $(DIRMOD) `find $(DEST_MACRO) -type d -print`
1858         chmod $(FILEMOD) `find $(DEST_MACRO) -type f -print`
1859         chmod $(SCRIPTMOD) $(DEST_MACRO)/less.sh
1860 # When using CVS some CVS directories might have been copied.
1861         cvs=`find $(DEST_MACRO) \( -name CVS -o -name AAPDIR \) -print`; \
1862               if test -n "$$cvs"; then \
1863                  rm -rf $$cvs; \
1864               fi
1865
1866 # install the tutor files
1867 installtutorbin: $(DEST_VIM)
1868         $(INSTALL_DATA) vimtutor $(DEST_BIN)/$(VIMNAME)tutor
1869         chmod $(SCRIPTMOD) $(DEST_BIN)/$(VIMNAME)tutor
1870         $(INSTALL_DATA) gvimtutor $(DEST_BIN)/$(GVIMNAME)tutor
1871         chmod $(SCRIPTMOD) $(DEST_BIN)/$(GVIMNAME)tutor
1872
1873 installtutor: $(DEST_RT) $(DEST_TUTOR)
1874         -$(INSTALL_DATA) $(TUTORSOURCE)/README* $(TUTORSOURCE)/tutor* $(DEST_TUTOR)
1875         chmod $(HELPMOD) $(DEST_TUTOR)/*
1876
1877 # Install the spell files, if they exist.  This assumes at least the English
1878 # spell file is there.
1879 installspell: $(DEST_VIM) $(DEST_RT) $(DEST_SPELL)
1880         if test -f $(SPELLSOURCE)/en.latin1.spl; then \
1881           $(INSTALL_DATA) $(SPELLSOURCE)/*.spl $(SPELLSOURCE)/*.sug $(SPELLSOURCE)/*.vim $(DEST_SPELL); \
1882           chmod $(HELPMOD) $(DEST_SPELL)/*.spl $(DEST_SPELL)/*.sug $(DEST_SPELL)/*.vim; \
1883         fi
1884
1885 # install helper program xxd
1886 installtools: $(TOOLS) $(DESTDIR)$(exec_prefix) $(DEST_BIN) \
1887                 $(TOOLSSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_TOOLS) \
1888                 $(INSTALL_TOOL_LANGS)
1889         if test -f $(DEST_BIN)/xxd$(EXEEXT); then \
1890           mv -f $(DEST_BIN)/xxd$(EXEEXT) $(DEST_BIN)/xxd.rm; \
1891           rm -f $(DEST_BIN)/xxd.rm; \
1892         fi
1893         $(INSTALL_PROG) xxd/xxd$(EXEEXT) $(DEST_BIN)
1894         $(STRIP) $(DEST_BIN)/xxd$(EXEEXT)
1895         chmod $(BINMOD) $(DEST_BIN)/xxd$(EXEEXT)
1896         -$(SHELL) ./installman.sh xxd $(DEST_MAN) "" $(INSTALLMANARGS)
1897
1898 # install the runtime tools
1899         $(INSTALL_DATA_R) $(TOOLSSOURCE)/* $(DEST_TOOLS)
1900 # When using CVS some CVS directories might have been copied.
1901         cvs=`find $(DEST_TOOLS) \( -name CVS -o -name AAPDIR \) -print`; \
1902               if test -n "$$cvs"; then \
1903                  rm -rf $$cvs; \
1904               fi
1905         -chmod $(FILEMOD) $(DEST_TOOLS)/*
1906 # replace the path in some tools
1907         perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl
1908         awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \
1909                 awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \
1910                 awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi
1911         -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*`
1912
1913 # install the language specific files for tools, if they were unpacked
1914 install-tool-languages:
1915         -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS)
1916         -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS)
1917         -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS)
1918         -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT) "-it" $(INSTALLMANARGS)
1919         -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS)
1920         -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS)
1921         -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS)
1922         -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS)
1923         -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS)
1924         -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS)
1925         -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS)
1926
1927 # install the language specific files, if they were unpacked
1928 install-languages: languages $(DEST_LANG) $(DEST_KMAP)
1929         -$(SHELL) ./installman.sh install $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS)
1930         -$(SHELL) ./installman.sh install $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS)
1931         -$(SHELL) ./installman.sh install $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS)
1932         -$(SHELL) ./installman.sh install $(DEST_MAN_IT) "-it" $(INSTALLMANARGS)
1933         -$(SHELL) ./installman.sh install $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS)
1934         -$(SHELL) ./installman.sh install $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS)
1935         -$(SHELL) ./installman.sh install $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS)
1936         -$(SHELL) ./installman.sh install $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS)
1937         -$(SHELL) ./installman.sh install $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS)
1938         -$(SHELL) ./installman.sh install $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS)
1939         -$(SHELL) ./installman.sh install $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS)
1940         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1941                 $(DEST_MAN_FR) $(INSTALLMLARGS)
1942         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1943                 $(DEST_MAN_FR_I) $(INSTALLMLARGS)
1944         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1945                 $(DEST_MAN_FR_U) $(INSTALLMLARGS)
1946         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1947                 $(DEST_MAN_IT) $(INSTALLMLARGS)
1948         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1949                 $(DEST_MAN_IT_I) $(INSTALLMLARGS)
1950         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1951                 $(DEST_MAN_IT_U) $(INSTALLMLARGS)
1952         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1953                 $(DEST_MAN_PL) $(INSTALLMLARGS)
1954         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1955                 $(DEST_MAN_PL_I) $(INSTALLMLARGS)
1956         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1957                 $(DEST_MAN_PL_U) $(INSTALLMLARGS)
1958         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1959                 $(DEST_MAN_RU) $(INSTALLMLARGS)
1960         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1961                 $(DEST_MAN_RU_U) $(INSTALLMLARGS)
1962         if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \
1963            cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) LOCALEDIR=$(DEST_LANG) \
1964            INSTALL_DATA=$(INSTALL_DATA) FILEMOD=$(FILEMOD) install; \
1965         fi
1966         if test -d $(LANGSOURCE); then \
1967            $(INSTALL_DATA) $(LANGSOURCE)/README.txt $(LANGSOURCE)/*.vim $(DEST_LANG); \
1968            chmod $(FILEMOD) $(DEST_LANG)/README.txt $(DEST_LANG)/*.vim; \
1969         fi
1970         if test -d $(KMAPSOURCE); then \
1971            $(INSTALL_DATA) $(KMAPSOURCE)/README.txt $(KMAPSOURCE)/*.vim $(DEST_KMAP); \
1972            chmod $(FILEMOD) $(DEST_KMAP)/README.txt $(DEST_KMAP)/*.vim; \
1973         fi
1974
1975 # install the icons for KDE, if the directory exists and the icon doesn't.
1976 ICON48PATH = $(DESTDIR)$(DATADIR)/icons/hicolor/48x48/apps
1977 ICON32PATH = $(DESTDIR)$(DATADIR)/icons/locolor/32x32/apps
1978 ICON16PATH = $(DESTDIR)$(DATADIR)/icons/locolor/16x16/apps
1979 KDEPATH = $(HOME)/.kde/share/icons
1980 install-icons:
1981         if test -d $(ICON48PATH) -a -w $(ICON48PATH) \
1982                 -a ! -f $(ICON48PATH)/gvim.png; then \
1983            $(INSTALL_DATA) $(SCRIPTSOURCE)/vim48x48.png $(ICON48PATH)/gvim.png; \
1984         fi
1985         if test -d $(ICON32PATH) -a -w $(ICON32PATH) \
1986                 -a ! -f $(ICON32PATH)/gvim.png; then \
1987            $(INSTALL_DATA) $(SCRIPTSOURCE)/vim32x32.png $(ICON32PATH)/gvim.png; \
1988         fi
1989         if test -d $(ICON16PATH) -a -w $(ICON16PATH) \
1990                 -a ! -f $(ICON16PATH)/gvim.png; then \
1991            $(INSTALL_DATA) $(SCRIPTSOURCE)/vim16x16.png $(ICON16PATH)/gvim.png; \
1992         fi
1993
1994
1995 $(HELPSOURCE)/vim.1 $(MACROSOURCE) $(TOOLSSOURCE):
1996         @echo Runtime files not found.
1997         @echo You need to unpack the runtime archive before running "make install".
1998         test -f error
1999
2000 $(DESTDIR)$(exec_prefix) $(DEST_BIN) \
2001                 $(DEST_VIM) $(DEST_RT) $(DEST_HELP) \
2002                 $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) $(DEST_FTP) \
2003                 $(DEST_LANG) $(DEST_KMAP) $(DEST_COMP) \
2004                 $(DEST_MACRO) $(DEST_TOOLS) $(DEST_TUTOR) $(DEST_SPELL) \
2005                 $(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG):
2006         -$(SHELL) ./mkinstalldirs $@
2007         -chmod $(DIRMOD) $@
2008
2009 # create links from various names to vim.  This is only done when the links
2010 # (or executables with the same name) don't exist yet.
2011 installlinks: $(GUI_TARGETS) \
2012                         $(DEST_BIN)/$(EXTARGET) \
2013                         $(DEST_BIN)/$(VIEWTARGET) \
2014                         $(DEST_BIN)/$(RVIMTARGET) \
2015                         $(DEST_BIN)/$(RVIEWTARGET) \
2016                         $(INSTALLVIMDIFF)
2017
2018 installglinks: $(DEST_BIN)/$(GVIMTARGET) \
2019                         $(DEST_BIN)/$(GVIEWTARGET) \
2020                         $(DEST_BIN)/$(RGVIMTARGET) \
2021                         $(DEST_BIN)/$(RGVIEWTARGET) \
2022                         $(DEST_BIN)/$(EVIMTARGET) \
2023                         $(DEST_BIN)/$(EVIEWTARGET) \
2024                         $(INSTALLGVIMDIFF)
2025
2026 installvimdiff: $(DEST_BIN)/$(VIMDIFFTARGET)
2027 installgvimdiff: $(DEST_BIN)/$(GVIMDIFFTARGET)
2028
2029 $(DEST_BIN)/$(EXTARGET):
2030         cd $(DEST_BIN); ln -s $(VIMTARGET) $(EXTARGET)
2031
2032 $(DEST_BIN)/$(VIEWTARGET):
2033         cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIEWTARGET)
2034
2035 $(DEST_BIN)/$(GVIMTARGET):
2036         cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMTARGET)
2037
2038 $(DEST_BIN)/$(GVIEWTARGET):
2039         cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIEWTARGET)
2040
2041 $(DEST_BIN)/$(RVIMTARGET):
2042         cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIMTARGET)
2043
2044 $(DEST_BIN)/$(RVIEWTARGET):
2045         cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIEWTARGET)
2046
2047 $(DEST_BIN)/$(RGVIMTARGET):
2048         cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIMTARGET)
2049
2050 $(DEST_BIN)/$(RGVIEWTARGET):
2051         cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIEWTARGET)
2052
2053 $(DEST_BIN)/$(VIMDIFFTARGET):
2054         cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIMDIFFTARGET)
2055
2056 $(DEST_BIN)/$(GVIMDIFFTARGET):
2057         cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMDIFFTARGET)
2058
2059 $(DEST_BIN)/$(EVIMTARGET):
2060         cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIMTARGET)
2061
2062 $(DEST_BIN)/$(EVIEWTARGET):
2063         cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIEWTARGET)
2064
2065 # Create links for the manual pages with various names to vim.  This is only
2066 # done when the links (or manpages with the same name) don't exist yet.
2067
2068 INSTALLMLARGS = $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) \
2069                 $(EXNAME) $(VIEWNAME) $(RVIMNAME) $(RVIEWNAME) \
2070                 $(GVIMNAME) $(GVIEWNAME) $(RGVIMNAME) $(RGVIEWNAME) \
2071                 $(GVIMDIFFNAME) $(EVIEWNAME)
2072
2073 installmanlinks:
2074         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
2075                 $(DEST_MAN) $(INSTALLMLARGS)
2076
2077 uninstall: uninstall_runtime
2078         -rm -f $(DEST_BIN)/$(VIMTARGET)
2079         -rm -f $(DEST_BIN)/vimtutor
2080         -rm -f $(DEST_BIN)/gvimtutor
2081         -rm -f $(DEST_BIN)/$(EXTARGET) $(DEST_BIN)/$(VIEWTARGET)
2082         -rm -f $(DEST_BIN)/$(GVIMTARGET) $(DEST_BIN)/$(GVIEWTARGET)
2083         -rm -f $(DEST_BIN)/$(RVIMTARGET) $(DEST_BIN)/$(RVIEWTARGET)
2084         -rm -f $(DEST_BIN)/$(RGVIMTARGET) $(DEST_BIN)/$(RGVIEWTARGET)
2085         -rm -f $(DEST_BIN)/$(VIMDIFFTARGET) $(DEST_BIN)/$(GVIMDIFFTARGET)
2086         -rm -f $(DEST_BIN)/$(EVIMTARGET) $(DEST_BIN)/$(EVIEWTARGET)
2087         -rm -f $(DEST_BIN)/xxd$(EXEEXT)
2088
2089 # Note: the "rmdir" will fail if any files were added after "make install"
2090 uninstall_runtime:
2091         -$(SHELL) ./installman.sh uninstall $(DEST_MAN) "" $(INSTALLMANARGS)
2092         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR) "" $(INSTALLMANARGS)
2093         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_I) "" $(INSTALLMANARGS)
2094         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_U) "" $(INSTALLMANARGS)
2095         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT) "" $(INSTALLMANARGS)
2096         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_I) "" $(INSTALLMANARGS)
2097         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_U) "" $(INSTALLMANARGS)
2098         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL) "" $(INSTALLMANARGS)
2099         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_I) "" $(INSTALLMANARGS)
2100         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_U) "" $(INSTALLMANARGS)
2101         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU) "" $(INSTALLMANARGS)
2102         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU_U) "" $(INSTALLMANARGS)
2103         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2104                 $(DEST_MAN) $(INSTALLMLARGS)
2105         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2106                 $(DEST_MAN_FR) $(INSTALLMLARGS)
2107         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2108                 $(DEST_MAN_FR_I) $(INSTALLMLARGS)
2109         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2110                 $(DEST_MAN_FR_U) $(INSTALLMLARGS)
2111         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2112                 $(DEST_MAN_IT) $(INSTALLMLARGS)
2113         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2114                 $(DEST_MAN_IT_I) $(INSTALLMLARGS)
2115         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2116                 $(DEST_MAN_IT_U) $(INSTALLMLARGS)
2117         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2118                 $(DEST_MAN_PL) $(INSTALLMLARGS)
2119         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2120                 $(DEST_MAN_PL_I) $(INSTALLMLARGS)
2121         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2122                 $(DEST_MAN_PL_U) $(INSTALLMLARGS)
2123         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2124                 $(DEST_MAN_RU) $(INSTALLMLARGS)
2125         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2126                 $(DEST_MAN_RU_U) $(INSTALLMLARGS)
2127         -rm -f $(DEST_MAN)/xxd.1
2128         -rm -f $(DEST_MAN_FR)/xxd.1 $(DEST_MAN_FR_I)/xxd.1 $(DEST_MAN_FR_U)/xxd.1
2129         -rm -f $(DEST_MAN_IT)/xxd.1 $(DEST_MAN_IT_I)/xxd.1 $(DEST_MAN_IT_U)/xxd.1
2130         -rm -f $(DEST_MAN_PL)/xxd.1 $(DEST_MAN_PL_I)/xxd.1 $(DEST_MAN_PL_U)/xxd.1
2131         -rm -f $(DEST_MAN_RU)/xxd.1 $(DEST_MAN_RU_U)/xxd.1
2132         -rm -f $(DEST_HELP)/*.txt $(DEST_HELP)/tags $(DEST_HELP)/*.pl
2133         -rm -f $(DEST_HELP)/*.??x $(DEST_HELP)/tags-??
2134         -rm -f $(SYS_MENU_FILE) $(SYS_SYNMENU_FILE) $(SYS_DELMENU_FILE)
2135         -rm -f $(SYS_BUGR_FILE) $(EVIM_FILE) $(MSWIN_FILE)
2136         -rm -f $(DEST_SCRIPT)/gvimrc_example.vim $(DEST_SCRIPT)/vimrc_example.vim
2137         -rm -f $(SYS_FILETYPE_FILE) $(SYS_FTOFF_FILE) $(SYS_SCRIPTS_FILE)
2138         -rm -f $(SYS_INDOFF_FILE) $(SYS_INDENT_FILE)
2139         -rm -f $(SYS_FTPLUGOF_FILE) $(SYS_FTPLUGIN_FILE)
2140         -rm -f $(SYS_OPTWIN_FILE)
2141         -rm -f $(DEST_COL)/*.vim $(DEST_COL)/README.txt
2142         -rm -f $(DEST_SYN)/*.vim $(DEST_SYN)/README.txt
2143         -rm -f $(DEST_IND)/*.vim $(DEST_IND)/README.txt
2144         -rm -rf $(DEST_MACRO)
2145         -rm -rf $(DEST_TUTOR)
2146         -rm -rf $(DEST_SPELL)
2147         -rm -rf $(DEST_TOOLS)
2148         -rm -rf $(DEST_LANG)
2149         -rm -rf $(DEST_KMAP)
2150         -rm -rf $(DEST_COMP)
2151         -rm -f $(DEST_PRINT)/*.ps
2152         -rmdir $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND)
2153         -rm -rf $(DEST_FTP)/*.vim $(DEST_FTP)/README.txt
2154         -rm -f $(DEST_AUTO)/*.vim $(DEST_AUTO)/README.txt $(DEST_AUTO)/xml/*.vim
2155         -rm -f $(DEST_PLUG)/*.vim $(DEST_PLUG)/README.txt
2156         -rmdir $(DEST_FTP) $(DEST_AUTO)/xml $(DEST_AUTO) $(DEST_PLUG) $(DEST_RT)
2157 #       This will fail when other Vim versions are installed, no worries.
2158         -rmdir $(DEST_VIM)
2159
2160 # Clean up all the files that have been produced, except configure's.
2161 # We support common typing mistakes for Juergen! :-)
2162 clean celan: testclean
2163         -rm -f *.o objects/* core $(VIMTARGET).core $(VIMTARGET) vim xxd/*.o
2164         -rm -f $(TOOLS) auto/osdef.h auto/pathdef.c auto/if_perl.c
2165         -rm -f conftest* *~ auto/link.sed
2166         -rm -rf $(APPDIR)
2167         if test -d $(PODIR); then \
2168                 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) clean; \
2169         fi
2170
2171 # Make a shadow directory for compilation on another system or with different
2172 # features.
2173 SHADOWDIR = shadow
2174
2175 shadow: runtime pixmaps
2176         mkdir $(SHADOWDIR)
2177         cd $(SHADOWDIR); ln -s ../*.[ch] ../*.in ../*.sh ../*.xs ../*.xbm ../toolcheck ../proto ../vimtutor ../gvimtutor ../mkinstalldirs .
2178         mkdir $(SHADOWDIR)/auto
2179         cd $(SHADOWDIR)/auto; ln -s ../../auto/configure .
2180         cd $(SHADOWDIR); rm -f auto/link.sed
2181         cp Makefile configure $(SHADOWDIR)
2182         rm -f $(SHADOWDIR)/auto/config.mk $(SHADOWDIR)/config.mk.dist
2183         cp config.mk.dist $(SHADOWDIR)/auto/config.mk
2184         cp config.mk.dist $(SHADOWDIR)
2185         mkdir $(SHADOWDIR)/xxd
2186         cd $(SHADOWDIR)/xxd; ln -s ../../xxd/*.[ch] ../../xxd/Make* .
2187         if test -d $(RSRC_DIR); then \
2188                 cd $(SHADOWDIR); \
2189                 ln -s ../infplist.xml .; \
2190                 ln -s ../$(RSRC_DIR) ../os_mac.rsr.hqx ../dehqx.py .; \
2191         fi
2192         mkdir $(SHADOWDIR)/testdir
2193         cd $(SHADOWDIR)/testdir; ln -s ../../testdir/Makefile \
2194                                  ../../testdir/vimrc.unix \
2195                                  ../../testdir/*.in \
2196                                  ../../testdir/unix.vim \
2197                                  ../../testdir/*.ok .
2198
2199 # Link needed for doing "make install" in a shadow directory.
2200 runtime:
2201         -ln -s ../runtime .
2202
2203 # Link needed for doing "make" using GTK in a shadow directory.
2204 pixmaps:
2205         -ln -s ../pixmaps .
2206
2207 # Update the synmenu.vim file with the latest Syntax menu.
2208 # This is only needed when runtime/makemenu.vim was changed.
2209 menu: ./vim ../runtime/makemenu.vim
2210         ./vim -u ../runtime/makemenu.vim
2211
2212 # Start configure from scratch
2213 scrub scratch:
2214         -rm -f auto/config.status auto/config.cache config.log auto/config.log
2215         -rm -f auto/config.h auto/link.log auto/link.sed auto/config.mk
2216         touch auto/config.h
2217         cp config.mk.dist auto/config.mk
2218
2219 distclean: clean scratch
2220         -rm -f tags
2221
2222 dist: distclean
2223         @echo
2224         @echo Making the distribution has to be done in the top directory
2225
2226 mdepend:
2227         -@rm -f Makefile~
2228         cp Makefile Makefile~
2229         sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make
2230         @for i in $(ALL_SRC) ; do \
2231           echo "$$i" ; \
2232           echo `echo "$$i" | sed -e 's/[^ ]*\.c$$/objects\/\1.o/'`": $$i" `\
2233             $(CPP) $$i |\
2234             grep '^# .*"\./.*\.h"' |\
2235             sort -t'"' -u +1 -2 |\
2236             sed -e 's/.*"\.\/\(.*\)".*/\1/'\
2237             ` >> tmp_make ; \
2238         done
2239         mv tmp_make Makefile
2240
2241 depend:
2242         -@rm -f Makefile~
2243         cp Makefile Makefile~
2244         sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make
2245         -for i in $(ALL_SRC); do echo $$i; \
2246                 $(CPP_DEPEND) $$i | \
2247                 sed -e 's+^\([^ ]*\.o\)+objects/\1+' >> tmp_make; done
2248         mv tmp_make Makefile
2249
2250 # Run lint.  Clean up the *.ln files that are sometimes left behind.
2251 lint:
2252         lint $(LINT_OPTIONS) $(LINT_CFLAGS) $(LINT_EXTRA) $(LINT_SRC)
2253         -rm -f *.ln
2254
2255 # Check dosinst.c with lint.
2256 lintinstall:
2257         lint $(LINT_OPTIONS) -DWIN32 -DUNIX_LINT dosinst.c
2258         -rm -f dosinst.ln
2259
2260 ###########################################################################
2261
2262 .c.o:
2263         $(CCC) $<
2264
2265 auto/if_perl.c: if_perl.xs
2266         $(PERL) -e 'unless ( $$] >= 5.005 ) { for (qw(na defgv errgv)) { print "#define PL_$$_ $$_\n" }}' > $@
2267         $(PERL) $(PERLLIB)/ExtUtils/xsubpp -prototypes -typemap \
2268             $(PERLLIB)/ExtUtils/typemap if_perl.xs >> $@
2269
2270 auto/osdef.h: auto/config.h osdef.sh osdef1.h.in osdef2.h.in
2271         CC="$(CC) $(OSDEF_CFLAGS)" srcdir=$(srcdir) sh $(srcdir)/osdef.sh
2272
2273 QUOTESED = sed -e 's/[\\"]/\\&/g' -e 's/\\"/"/' -e 's/\\";$$/";/'
2274 auto/pathdef.c: Makefile auto/config.mk
2275         -@echo creating $@
2276         -@echo '/* pathdef.c */' > $@
2277         -@echo '/* This file is automatically created by Makefile' >> $@
2278         -@echo ' * DO NOT EDIT!  Change Makefile only. */' >> $@
2279         -@echo '#include "vim.h"' >> $@
2280         -@echo 'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' | $(QUOTESED) >> $@
2281         -@echo 'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' | $(QUOTESED) >> $@
2282         -@echo 'char_u *all_cflags = (char_u *)"$(CC) -c -I$(srcdir) $(ALL_CFLAGS)";' | $(QUOTESED) >>  $@
2283         -@echo 'char_u *all_lflags = (char_u *)"$(CC) $(ALL_LIB_DIRS) $(LDFLAGS) -o $(VIMTARGET) $(ALL_LIBS) ";' | $(QUOTESED) >>  $@
2284         -@echo 'char_u *compiled_user = (char_u *)"' | tr -d $(NL) >> $@
2285         -@if test -n "$(COMPILEDBY)"; then \
2286                 echo "$(COMPILEDBY)" | tr -d $(NL) >> $@; \
2287                 else ((logname) 2>/dev/null || whoami) | tr -d $(NL) >> $@; fi
2288         -@echo '";' >> $@
2289         -@echo 'char_u *compiled_sys = (char_u *)"' | tr -d $(NL) >> $@
2290         -@if test -z "$(COMPILEDBY)"; then hostname | tr -d $(NL) >> $@; fi
2291         -@echo '";' >> $@
2292         -@sh $(srcdir)/pathdef.sh
2293
2294 # All the object files are put in the "objects" directory.  Since not all make
2295 # commands understand putting object files in another directory, it must be
2296 # specified for each file separately.
2297
2298 objects:
2299         mkdir objects
2300
2301 objects/buffer.o: buffer.c
2302         $(CCC) -o $@ buffer.c
2303
2304 objects/charset.o: charset.c
2305         $(CCC) -o $@ charset.c
2306
2307 objects/diff.o: diff.c
2308         $(CCC) -o $@ diff.c
2309
2310 objects/digraph.o: digraph.c
2311         $(CCC) -o $@ digraph.c
2312
2313 objects/edit.o: edit.c
2314         $(CCC) -o $@ edit.c
2315
2316 objects/eval.o: eval.c
2317         $(CCC) -o $@ eval.c
2318
2319 objects/ex_cmds.o: ex_cmds.c
2320         $(CCC) -o $@ ex_cmds.c
2321
2322 objects/ex_cmds2.o: ex_cmds2.c
2323         $(CCC) -o $@ ex_cmds2.c
2324
2325 objects/ex_docmd.o: ex_docmd.c
2326         $(CCC) -o $@ ex_docmd.c
2327
2328 objects/ex_eval.o: ex_eval.c
2329         $(CCC) -o $@ ex_eval.c
2330
2331 objects/ex_getln.o: ex_getln.c
2332         $(CCC) -o $@ ex_getln.c
2333
2334 objects/fileio.o: fileio.c
2335         $(CCC) -o $@ fileio.c
2336
2337 objects/fold.o: fold.c
2338         $(CCC) -o $@ fold.c
2339
2340 objects/getchar.o: getchar.c
2341         $(CCC) -o $@ getchar.c
2342
2343 objects/hardcopy.o: hardcopy.c
2344         $(CCC) -o $@ hardcopy.c
2345
2346 objects/hashtab.o: hashtab.c
2347         $(CCC) -o $@ hashtab.c
2348
2349 objects/gui.o: gui.c
2350         $(CCC) -o $@ gui.c
2351
2352 objects/gui_at_fs.o: gui_at_fs.c
2353         $(CCC) -o $@ gui_at_fs.c
2354
2355 objects/gui_at_sb.o: gui_at_sb.c
2356         $(CCC) -o $@ gui_at_sb.c
2357
2358 objects/gui_athena.o: gui_athena.c
2359         $(CCC) -o $@ gui_athena.c
2360
2361 objects/gui_beval.o: gui_beval.c
2362         $(CCC) -o $@ gui_beval.c
2363
2364 objects/gui_gtk.o: gui_gtk.c
2365         $(CCC) -o $@ gui_gtk.c
2366
2367 objects/gui_gtk_f.o: gui_gtk_f.c
2368         $(CCC) -o $@ gui_gtk_f.c
2369
2370 objects/gui_gtk_x11.o: gui_gtk_x11.c
2371         $(CCC) -o $@ gui_gtk_x11.c
2372
2373 objects/gui_motif.o: gui_motif.c
2374         $(CCC) -o $@ gui_motif.c
2375
2376 objects/gui_xmdlg.o: gui_xmdlg.c
2377         $(CCC) -o $@ gui_xmdlg.c
2378
2379 objects/gui_xmebw.o: gui_xmebw.c
2380         $(CCC) -o $@ gui_xmebw.c
2381
2382 objects/gui_x11.o: gui_x11.c
2383         $(CCC) -o $@ gui_x11.c
2384
2385 objects/gui_photon.o: gui_photon.c
2386         $(CCC) -o $@ gui_photon.c
2387
2388 objects/gui_mac.o: gui_mac.c
2389         $(CCC) -o $@ gui_mac.c
2390
2391 objects/hangulin.o: hangulin.c
2392         $(CCC) -o $@ hangulin.c
2393
2394 objects/if_cscope.o: if_cscope.c
2395         $(CCC) -o $@ if_cscope.c
2396
2397 objects/if_xcmdsrv.o: if_xcmdsrv.c
2398         $(CCC) -o $@ if_xcmdsrv.c
2399
2400 objects/if_mzsch.o: if_mzsch.c
2401         $(CCC) -o $@ if_mzsch.c
2402
2403 objects/if_perl.o: auto/if_perl.c
2404         $(CCC) -o $@ auto/if_perl.c
2405
2406 objects/if_perlsfio.o: if_perlsfio.c
2407         $(CCC) -o $@ if_perlsfio.c
2408
2409 objects/if_python.o: if_python.c
2410         $(CCC) -o $@ if_python.c
2411
2412 objects/if_ruby.o: if_ruby.c
2413         $(CCC) -o $@ if_ruby.c
2414
2415 objects/if_sniff.o: if_sniff.c
2416         $(CCC) -o $@ if_sniff.c
2417
2418 objects/if_tcl.o: if_tcl.c
2419         $(CCC) -o $@ if_tcl.c
2420
2421 objects/integration.o: integration.c
2422         $(CCC) -o $@ integration.c
2423
2424 objects/main.o: main.c
2425         $(CCC) -o $@ main.c
2426
2427 objects/mark.o: mark.c
2428         $(CCC) -o $@ mark.c
2429
2430 objects/memfile.o: memfile.c
2431         $(CCC) -o $@ memfile.c
2432
2433 objects/memline.o: memline.c
2434         $(CCC) -o $@ memline.c
2435
2436 objects/menu.o: menu.c
2437         $(CCC) -o $@ menu.c
2438
2439 objects/message.o: message.c
2440         $(CCC) -o $@ message.c
2441
2442 objects/misc1.o: misc1.c
2443         $(CCC) -o $@ misc1.c
2444
2445 objects/misc2.o: misc2.c
2446         $(CCC) -o $@ misc2.c
2447
2448 objects/move.o: move.c
2449         $(CCC) -o $@ move.c
2450
2451 objects/mbyte.o: mbyte.c
2452         $(CCC) -o $@ mbyte.c
2453
2454 objects/normal.o: normal.c
2455         $(CCC) -o $@ normal.c
2456
2457 objects/ops.o: ops.c
2458         $(CCC) -o $@ ops.c
2459
2460 objects/option.o: option.c
2461         $(CCC) -o $@ option.c
2462
2463 objects/os_beos.o: os_beos.c
2464         $(CCC) -o $@ os_beos.c
2465
2466 objects/os_qnx.o: os_qnx.c
2467         $(CCC) -o $@ os_qnx.c
2468
2469 objects/os_macosx.o: os_macosx.c
2470         $(CCC) -o $@ os_macosx.c
2471
2472 objects/os_mac_conv.o: os_mac_conv.c
2473         $(CCC) -o $@ os_mac_conv.c
2474
2475 objects/os_unix.o: os_unix.c
2476         $(CCC) -o $@ os_unix.c
2477
2478 objects/pathdef.o: auto/pathdef.c
2479         $(CCC) -o $@ auto/pathdef.c
2480
2481 objects/py_config.o: $(PYTHON_CONFDIR)/config.c
2482         $(CCC) -o $@ $(PYTHON_CONFDIR)/config.c \
2483                 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN
2484
2485 objects/py_getpath.o: $(PYTHON_CONFDIR)/getpath.c
2486         $(CCC) -o $@ $(PYTHON_CONFDIR)/getpath.c \
2487                 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN \
2488                 $(PYTHON_GETPATH_CFLAGS)
2489
2490 objects/pty.o: pty.c
2491         $(CCC) -o $@ pty.c
2492
2493 objects/popupmnu.o: popupmnu.c
2494         $(CCC) -o $@ popupmnu.c
2495
2496 objects/quickfix.o: quickfix.c
2497         $(CCC) -o $@ quickfix.c
2498
2499 objects/regexp.o: regexp.c
2500         $(CCC) -o $@ regexp.c
2501
2502 objects/screen.o: screen.c
2503         $(CCC) -o $@ screen.c
2504
2505 objects/search.o: search.c
2506         $(CCC) -o $@ search.c
2507
2508 objects/spell.o: spell.c
2509         $(CCC) -o $@ spell.c
2510
2511 objects/syntax.o: syntax.c
2512         $(CCC) -o $@ syntax.c
2513
2514 objects/tag.o: tag.c
2515         $(CCC) -o $@ tag.c
2516
2517 objects/term.o: term.c
2518         $(CCC) -o $@ term.c
2519
2520 objects/ui.o: ui.c
2521         $(CCC) -o $@ ui.c
2522
2523 objects/undo.o: undo.c
2524         $(CCC) -o $@ undo.c
2525
2526 objects/window.o: window.c
2527         $(CCC) -o $@ window.c
2528
2529 objects/workshop.o: workshop.c
2530         $(CCC) -o $@ workshop.c
2531
2532 objects/wsdebug.o: wsdebug.c
2533         $(CCC) -o $@ wsdebug.c
2534
2535 objects/netbeans.o: netbeans.c
2536         $(CCC) -o $@ netbeans.c
2537
2538 Makefile:
2539         @echo The name of the makefile MUST be "Makefile" (with capital M)!!!!
2540
2541 ###############################################################################
2542 ### MacOS X installation
2543 ###
2544 ### This installs a runnable Vim.app in $(prefix)
2545
2546 REZ    = /Developer/Tools/Rez
2547 RESDIR = $(APPDIR)/Contents/Resources
2548 VERSION = $(VIMMAJOR).$(VIMMINOR)
2549
2550 ### Common flags
2551 M4FLAGSX = $(M4FLAGS) -DAPP_EXE=$(VIMNAME) -DAPP_NAME=$(VIMNAME) \
2552                 -DAPP_VER=$(VERSION)
2553
2554 install_macosx: gui_bundle
2555 # Remove the link to the runtime dir, don't want to copy all of that.
2556         -rm $(RESDIR)/vim/runtime
2557         $(INSTALL_DATA_R) $(APPDIR) $(DESTDIR)$(prefix)
2558 # Generate the help tags file now, it won't work with "make installruntime".
2559         -@srcdir=`pwd`; cd $(HELPSOURCE); $(MAKE) VIMEXE=$$srcdir/$(VIMTARGET) vimtags
2560 # Install the runtime files.  Recursive!
2561         -mkdir -p $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime
2562 #       -mkdir $(DESTDIR)$(prefix)/$(APPDIR)/bin
2563         srcdir=`pwd`; $(MAKE) -f Makefile installruntime \
2564                 VIMEXE=$$srcdir/$(VIMTARGET) \
2565                 prefix=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \
2566                 exec_prefix=$(DESTDIR)$(prefix)/$(APPDIR)/Contents \
2567                 BINDIR=$(DESTDIR)$(prefix)/$(APPDIR)/Contents/MacOS \
2568                 VIMLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \
2569                 VIMRTLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR)/runtime
2570 # Put the link back.
2571         ln -s `pwd`/../runtime $(RESDIR)/vim
2572 # Copy rgb.txt, Mac doesn't always have X11
2573         $(INSTALL_DATA) $(SCRIPTSOURCE)/rgb.txt $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime
2574 # TODO: Create the vimtutor application.
2575
2576 gui_bundle: $(RESDIR) bundle-dir bundle-executable bundle-info bundle-resource \
2577         bundle-language
2578
2579 $(RESDIR):
2580         mkdir -p $@
2581
2582 bundle-dir: $(APPDIR)/Contents $(VIMTARGET)
2583 # Make a link to the runtime directory, so that we can try out the executable
2584 # without installing it.
2585         mkdir -p $(RESDIR)/vim
2586         -ln -s `pwd`/../runtime $(RESDIR)/vim
2587
2588 bundle-executable: $(VIMTARGET)
2589         mkdir -p $(APPDIR)/Contents/MacOS
2590         cp $(VIMTARGET) $(APPDIR)/Contents/MacOS/$(VIMTARGET)
2591
2592 bundle-info:  bundle-dir
2593         @echo "Creating PkgInfo"
2594         @echo -n "APPLVIM!" > $(APPDIR)/Contents/PkgInfo
2595         @echo "Creating Info.plist"
2596         m4 $(M4FLAGSX) infplist.xml > $(APPDIR)/Contents/Info.plist
2597
2598 bundle-resource: bundle-dir bundle-rsrc
2599         cp -f $(RSRC_DIR)/*.icns $(RESDIR)
2600
2601 ### Classic resources
2602 # Resource fork (in the form of a .rsrc file) for Classic Vim (Mac OS 9)
2603 # This file is also required for OS X Vim.
2604 bundle-rsrc: os_mac.rsr.hqx
2605         @echo "Creating resource fork"
2606         python dehqx.py $<
2607         rm -f gui_mac.rsrc
2608         mv gui_mac.rsrc.rsrcfork $(RESDIR)/$(VIMNAME).rsrc
2609
2610 # po/Make_osx.pl says something about generating a Mac message file
2611 # for Ukrananian.  Would somebody using Mac OS X in Ukranian
2612 # *really* be upset that Carbon Vim was not localised in
2613 # Ukranian?
2614 #
2615 #bundle-language: bundle-dir po/Make_osx.pl
2616 #       cd po && perl Make_osx.pl --outdir ../$(RESDIR) $(MULTILANG)
2617 bundle-language: bundle-dir
2618
2619 $(APPDIR)/Contents:
2620         -$(SHELL) ./mkinstalldirs $(APPDIR)/Contents/MacOS
2621         -$(SHELL) ./mkinstalldirs $(RESDIR)/English.lproj
2622
2623
2624 ###############################################################################
2625 ### (automatically generated by 'make depend')
2626 ### Dependencies:
2627 objects/buffer.o: buffer.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2628   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2629   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2630   arabic.h version.h
2631 objects/charset.o: charset.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2632   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2633   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2634   arabic.h
2635 objects/diff.o: diff.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2636   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2637   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2638   arabic.h
2639 objects/digraph.o: digraph.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2640   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2641   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2642   arabic.h
2643 objects/edit.o: edit.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2644   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2645   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2646   arabic.h
2647 objects/eval.o: eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2648   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2649   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2650   arabic.h version.h
2651 objects/ex_cmds.o: ex_cmds.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2652   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2653   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2654   arabic.h version.h
2655 objects/ex_cmds2.o: ex_cmds2.c vim.h auto/config.h feature.h os_unix.h \
2656   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2657   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2658   globals.h farsi.h arabic.h version.h
2659 objects/ex_docmd.o: ex_docmd.c vim.h auto/config.h feature.h os_unix.h \
2660   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2661   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2662   globals.h farsi.h arabic.h
2663 objects/ex_eval.o: ex_eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2664   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2665   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2666   arabic.h
2667 objects/ex_getln.o: ex_getln.c vim.h auto/config.h feature.h os_unix.h \
2668   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2669   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2670   globals.h farsi.h arabic.h
2671 objects/fileio.o: fileio.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2672   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2673   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2674   arabic.h
2675 objects/fold.o: fold.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2676   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2677   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2678   arabic.h
2679 objects/getchar.o: getchar.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2680   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2681   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2682   arabic.h
2683 objects/hardcopy.o: hardcopy.c vim.h auto/config.h feature.h os_unix.h \
2684   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2685   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2686   globals.h farsi.h arabic.h version.h
2687 objects/hashtab.o: hashtab.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2688   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2689   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2690   arabic.h
2691 objects/if_cscope.o: if_cscope.c vim.h auto/config.h feature.h os_unix.h \
2692   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2693   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2694   globals.h farsi.h arabic.h if_cscope.h
2695 objects/if_xcmdsrv.o: if_xcmdsrv.c vim.h auto/config.h feature.h os_unix.h \
2696   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2697   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2698   globals.h farsi.h arabic.h version.h
2699 objects/main.o: main.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2700   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2701   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2702   arabic.h farsi.c arabic.c
2703 objects/mark.o: mark.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2704   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2705   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2706   arabic.h
2707 objects/memfile.o: memfile.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2708   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2709   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2710   arabic.h
2711 objects/memline.o: memline.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2712   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2713   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2714   arabic.h
2715 objects/menu.o: menu.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2716   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2717   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2718   arabic.h
2719 objects/message.o: message.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2720   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2721   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2722   arabic.h
2723 objects/misc1.o: misc1.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2724   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2725   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2726   arabic.h version.h
2727 objects/misc2.o: misc2.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2728   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2729   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2730   arabic.h
2731 objects/move.o: move.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2732   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2733   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2734   arabic.h
2735 objects/mbyte.o: mbyte.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2736   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2737   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2738   arabic.h
2739 objects/normal.o: normal.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2740   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2741   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2742   arabic.h
2743 objects/ops.o: ops.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \
2744   keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
2745   proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
2746 objects/option.o: option.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2747   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2748   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2749   arabic.h
2750 objects/os_unix.o: os_unix.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2751   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2752   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2753   arabic.h if_mzsch.h os_unixx.h
2754 objects/pathdef.o: auto/pathdef.c ./vim.h ./auto/config.h ./feature.h ./os_unix.h \
2755   ./auto/osdef.h ./ascii.h ./keymap.h ./term.h ./macros.h ./option.h \
2756   ./structs.h ./regexp.h ./gui.h ./gui_beval.h proto/gui_beval.pro \
2757   ./ex_cmds.h ./proto.h ./globals.h ./farsi.h ./arabic.h
2758 objects/popupmnu.o: popupmnu.c vim.h auto/config.h feature.h os_unix.h \
2759   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2760   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2761   globals.h farsi.h arabic.h
2762 objects/quickfix.o: quickfix.c vim.h auto/config.h feature.h os_unix.h \
2763   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2764   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2765   globals.h farsi.h arabic.h
2766 objects/regexp.o: regexp.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2767   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2768   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2769   arabic.h
2770 objects/screen.o: screen.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2771   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2772   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2773   arabic.h
2774 objects/search.o: search.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2775   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2776   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2777   arabic.h
2778 objects/spell.o: spell.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2779   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2780   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2781   arabic.h
2782 objects/syntax.o: syntax.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2783   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2784   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2785   arabic.h
2786 objects/tag.o: tag.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \
2787   keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
2788   proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
2789 objects/term.o: term.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2790   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2791   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2792   arabic.h
2793 objects/ui.o: ui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \
2794   keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
2795   proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
2796 objects/undo.o: undo.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2797   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2798   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2799   arabic.h
2800 objects/version.o: version.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2801   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2802   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2803   arabic.h version.h
2804 objects/window.o: window.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2805   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2806   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2807   arabic.h
2808 objects/gui.o: gui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \
2809   keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
2810   proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
2811 objects/gui_gtk.o: gui_gtk.c gui_gtk_f.h vim.h auto/config.h feature.h os_unix.h \
2812   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2813   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2814   globals.h farsi.h arabic.h ../pixmaps/stock_icons.h
2815 objects/gui_gtk_f.o: gui_gtk_f.c vim.h auto/config.h feature.h os_unix.h \
2816   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2817   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2818   globals.h farsi.h arabic.h gui_gtk_f.h
2819 objects/gui_motif.o: gui_motif.c vim.h auto/config.h feature.h os_unix.h \
2820   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2821   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2822   globals.h farsi.h arabic.h gui_xmebw.h ../pixmaps/alert.xpm \
2823   ../pixmaps/error.xpm ../pixmaps/generic.xpm ../pixmaps/info.xpm \
2824   ../pixmaps/quest.xpm gui_x11_pm.h ../pixmaps/tb_new.xpm \
2825   ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm \
2826   ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm \
2827   ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \
2828   ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \
2829   ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \
2830   ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \
2831   ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \
2832   ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \
2833   ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \
2834   ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \
2835   ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \
2836   ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \
2837   ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \
2838   ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \
2839   ../pixmaps/tb_minwidth.xpm
2840 objects/gui_xmdlg.o: gui_xmdlg.c vim.h auto/config.h feature.h os_unix.h \
2841   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2842   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2843   globals.h farsi.h arabic.h
2844 objects/gui_xmebw.o: gui_xmebw.c vim.h auto/config.h feature.h os_unix.h \
2845   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2846   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2847   globals.h farsi.h arabic.h gui_xmebwp.h gui_xmebw.h
2848 objects/gui_athena.o: gui_athena.c vim.h auto/config.h feature.h os_unix.h \
2849   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2850   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2851   globals.h farsi.h arabic.h gui_at_sb.h gui_x11_pm.h \
2852   ../pixmaps/tb_new.xpm ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm \
2853   ../pixmaps/tb_save.xpm ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm \
2854   ../pixmaps/tb_copy.xpm ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \
2855   ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \
2856   ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \
2857   ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \
2858   ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \
2859   ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \
2860   ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \
2861   ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \
2862   ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \
2863   ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \
2864   ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \
2865   ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \
2866   ../pixmaps/tb_minwidth.xpm
2867 objects/gui_gtk_x11.o: gui_gtk_x11.c vim.h auto/config.h feature.h os_unix.h \
2868   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2869   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2870   globals.h farsi.h arabic.h gui_gtk_f.h ../runtime/vim32x32.xpm \
2871   ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm
2872 objects/gui_x11.o: gui_x11.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2873   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2874   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2875   arabic.h ../runtime/vim32x32.xpm ../runtime/vim16x16.xpm \
2876   ../runtime/vim48x48.xpm
2877 objects/gui_at_sb.o: gui_at_sb.c vim.h auto/config.h feature.h os_unix.h \
2878   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2879   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2880   globals.h farsi.h arabic.h gui_at_sb.h
2881 objects/gui_at_fs.o: gui_at_fs.c vim.h auto/config.h feature.h os_unix.h \
2882   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2883   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2884   globals.h farsi.h arabic.h gui_at_sb.h
2885 objects/pty.o: pty.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \
2886   keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
2887   proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
2888 objects/hangulin.o: hangulin.c vim.h auto/config.h feature.h os_unix.h \
2889   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2890   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2891   globals.h farsi.h arabic.h
2892 objects/if_mzsch.o: if_mzsch.c vim.h auto/config.h feature.h os_unix.h \
2893   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2894   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2895   globals.h farsi.h arabic.h if_mzsch.h
2896 objects/if_perl.o: auto/if_perl.c ./vim.h ./auto/config.h ./feature.h ./os_unix.h \
2897   ./auto/osdef.h ./ascii.h ./keymap.h ./term.h ./macros.h ./option.h \
2898   ./structs.h ./regexp.h ./gui.h ./gui_beval.h proto/gui_beval.pro \
2899   ./ex_cmds.h ./proto.h ./globals.h ./farsi.h ./arabic.h
2900 objects/if_perlsfio.o: if_perlsfio.c vim.h auto/config.h feature.h os_unix.h \
2901   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2902   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2903   globals.h farsi.h arabic.h
2904 objects/if_python.o: if_python.c vim.h auto/config.h feature.h os_unix.h \
2905   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2906   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2907   globals.h farsi.h arabic.h
2908 objects/if_tcl.o: if_tcl.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2909   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2910   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2911   arabic.h
2912 objects/if_ruby.o: if_ruby.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2913   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2914   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2915   arabic.h version.h
2916 objects/if_sniff.o: if_sniff.c vim.h auto/config.h feature.h os_unix.h \
2917   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2918   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2919   globals.h farsi.h arabic.h os_unixx.h
2920 objects/gui_beval.o: gui_beval.c vim.h auto/config.h feature.h os_unix.h \
2921   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2922   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2923   globals.h farsi.h arabic.h
2924 objects/workshop.o: workshop.c auto/config.h integration.h vim.h feature.h \
2925   os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h \
2926   structs.h regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h \
2927   proto.h globals.h farsi.h arabic.h version.h workshop.h
2928 objects/wsdebug.o: wsdebug.c
2929 objects/integration.o: integration.c vim.h auto/config.h feature.h os_unix.h \
2930   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2931   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2932   globals.h farsi.h arabic.h integration.h
2933 objects/netbeans.o: netbeans.c vim.h auto/config.h feature.h os_unix.h \
2934   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2935   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2936   globals.h farsi.h arabic.h version.h