solenv/gbuild/ExternalProject.mk

   1 # -*- Mode: makefile-gmake; tab-width: 4; indent-tabs-mode: t -*-
   2 #
   3 # This file is part of the LibreOffice project.
   4 #
   5 # This Source Code Form is subject to the terms of the Mozilla Public
   6 # License, v. 2.0. If a copy of the MPL was not distributed with this
   7 # file, You can obtain one at http://mozilla.org/MPL/2.0/.
   8 #
   9
  10 # class ExternalProject
  11
  12 # Handles build of an external project
  13
  14 # Build of an external typically uses three gbuild classes:
  15 # ExternalProject, ExternalPackage or Package, and UnpackedTarball. The
  16 # first step is to prepare sources using UnpackedTarball. The tarball is
  17 # passed to an ExternalProject, which handles the build proper and the
  18 # results are delivered by an ExternalPackage (or Package, again;
  19 # Package is sufficient if no files--e.g., headers--from the unpacked
  20 # tarball need to be delivered.)
  21 #
  22 # An ExternalProject always uses one UnpackedTarball with the same name.
  23 # The dependency structure ensures that any change on a dependency
  24 # of the ExternalProject will cause the UnpackedTarball to be unpacked
  25 # again, so the ExternalProject always does a clean build and is not at
  26 # the mercy of the external's build system's dubious incremental builds.
  27 #
  28 # ExternalProject target
  29 # => ExternalProject state target(s) (these actually build stuff)
  30 #    => UnpackedTarball target (unpack the tarball)
  31 #       => UnpackedTarball prepare target
  32 #          => ExternalProject prepare target
  33 #             => stuff the external depends upon
  34 #
  35 # ExternalProject has no gbuild abstraction for actually building the
  36 # external code, so it is necessary to define rule(s) and recipe(s) to
  37 # handle it. It does not matter if there are several rules handling
  38 # separate phases of the build (e.g., configure, build, install) or if
  39 # the whole build is handled by one rule.
  40 #
  41 # ExternalProject uses two directories during the build: state dir
  42 # serves to keep file targets that mark state of the build progress
  43 # (e.g., "configure done", "build done") and the targets are accessible
  44 # via gb_ExternalProject_get_state_target. It is highly advised to
  45 # register them using gb_ExternalProject_register_targets. The second
  46 # directory is work dir, accessible only from recipes via variable
  47 # $(EXTERNAL_WORKDIR).
  48
  49 $(dir $(call gb_ExternalProject_get_statedir,%))%/.dir :
  50         $(if $(wildcard $(dir $@)),,mkdir -p $(dir $@))
  51
  52 $(dir $(call gb_ExternalProject_get_target,%)).dir :
  53         $(if $(wildcard $(dir $@)),,mkdir -p $(dir $@))
  54
  55 $(call gb_ExternalProject_get_preparation_target,%) :
  56         touch $@
  57
  58 $(call gb_ExternalProject_get_target,%) :
  59         $(call gb_Output_announce,$*,$(true),PRJ,3)
  60         $(call gb_Trace_MakeMark,$*,PRJ)
  61         touch $@
  62
  63 .PHONY : $(call gb_ExternalProject_get_clean_target,%)
  64 $(call gb_ExternalProject_get_clean_target,%) :
  65         $(call gb_Output_announce,$*,$(false),PRJ,3)
  66         $(call gb_Helper_abbreviate_dirs,\
  67                 rm -rf \
  68                         $(call gb_ExternalProject_get_target,$*) \
  69                         $(call gb_ExternalProject_get_statedir,$*) \
  70         )
  71
  72 # Define a new external project, using an unpacked tarball of the same name
  73 #
  74 # gb_ExternalProject_ExternalProject project
  75 define gb_ExternalProject_ExternalProject
  76 $(call gb_ExternalProject_get_target,$(1)) : EXTERNAL_WORKDIR := $(call gb_UnpackedTarball_get_dir,$(1))
  77
  78 $(call gb_ExternalProject_get_preparation_target,$(1)) : $(gb_Module_CURRENTMAKEFILE)
  79 $(call gb_ExternalProject_get_preparation_target,$(1)) :| $(dir $(call gb_ExternalProject_get_target,$(1))).dir
  80 $(call gb_UnpackedTarball_get_preparation_target,$(1)) : $(call gb_ExternalProject_get_preparation_target,$(1))
  81 $(call gb_ExternalProject_get_clean_target,$(1)) : $(call gb_UnpackedTarball_get_clean_target,$(1))
  82 $(call gb_ExternalProject_get_target,$(1)) : $(call gb_UnpackedTarball_get_target,$(1))
  83 $(call gb_ExternalProject_get_target,$(1)) :| $(dir $(call gb_ExternalProject_get_target,$(1))).dir
  84
  85 $$(eval $$(call gb_Module_register_target,$(call gb_ExternalProject_get_target,$(1)),$(call gb_ExternalProject_get_clean_target,$(1))))
  86 $(call gb_Helper_make_userfriendly_targets,$(1),ExternalProject)
  87
  88 endef
  89
  90 # Depend on an unpacked tarball
  91 #
  92 # This is needed to express dependencies on header-only projects, which
  93 # do not have any ExternalProject.
  94 #
  95 # gb_ExternalProject_use_unpacked project unpacked
  96 define gb_ExternalProject_use_unpacked
  97 $(call gb_ExternalProject_get_preparation_target,$(1)) : $(call gb_UnpackedTarball_get_target,$(2))
  98
  99 endef
 100
 101 # Register a target in state directory
 102 #
 103 # This function defines proper dependencies for the target to ensure
 104 # that:
 105 # * the main target is updated if this target is updated
 106 # * this target is updated if the unpacked tarball has changed.
 107 #
 108 # gb_ExternalProject_register_target project target
 109 define gb_ExternalProject_register_target
 110 $(call gb_ExternalProject_get_target,$(1)) : $(call gb_ExternalProject_get_state_target,$(1),$(2))
 111 $(call gb_ExternalProject_get_state_target,$(1),$(2)) : $(call gb_UnpackedTarball_get_target,$(1))
 112 $(call gb_ExternalProject_get_state_target,$(1),$(2)) :| $(dir $(call gb_ExternalProject_get_state_target,$(1),$(2))).dir
 113
 114 endef
 115
 116 # Register several targets at once
 117 #
 118 # gb_ExternalProject_register_targets project target(s)
 119 define gb_ExternalProject_register_targets
 120 $(foreach target,$(2),$(call gb_ExternalProject_register_target,$(1),$(target)))
 121
 122 endef
 123
 124 # Make an external Project depend on another ExternalProject
 125 define gb_ExternalProject_use_external_project
 126 $(call gb_ExternalProject_get_preparation_target,$(1)) : $(call gb_ExternalProject_get_target,$(2))
 127
 128 endef
 129
 130 # call gb_ExternalProject_use_external_projects,project,projects
 131 define gb_ExternalProject_use_external_projects
 132 $(foreach ext,$(2),$(call gb_ExternalProject_use_external_project,$(1),$(ext)))
 133 endef
 134
 135 # Make an ExternalProject depend on an external
 136 #
 137 # this forwards to functions that must be defined in RepositoryExternal.mk.
 138 # $(eval $(call gb_ExternalProject_use_external,library,external))
 139 define gb_ExternalProject_use_external
 140 $(if $(filter undefined,$(origin gb_ExternalProject__use_$(2))),\
 141   $(error gb_ExternalProject_use_external: unknown external: $(2)),\
 142   $(call gb_ExternalProject__use_$(2),$(1)))
 143 endef
 144
 145 define gb_ExternalProject_use_externals
 146 $(foreach external,$(2),$(call gb_ExternalProject_use_external,$(1),$(external)))
 147 endef
 148
 149 # Make an external project depend on a package
 150 #
 151 # This is most useful for depending on output files created by another
 152 # ExternalProject.
 153 #
 154 # gb_ExternalProject_use_package external package
 155 define gb_ExternalProject_use_package
 156 $(call gb_ExternalProject_get_preparation_target,$(1)) : $(call gb_Package_get_target,$(2))
 157
 158 endef
 159
 160 # Make an external project depend on several packages at once
 161 #
 162 # gb_ExternalProject_use_packages external package(s)
 163 define gb_ExternalProject_use_packages
 164 $(foreach package,$(2),$(call gb_ExternalProject_use_package,$(1),$(package)))
 165
 166 endef
 167
 168 # Make an external project depend on a StaticLibrary
 169 #
 170 # Realistically there are some externals that do not have a usable build
 171 # system, and other externals that do may depend on those.
 172 #
 173 # gb_ExternalProject_use_static_libraries external staticlibraries
 174 define gb_ExternalProject_use_static_libraries
 175 $(call gb_ExternalProject_get_preparation_target,$(1)) : \
 176         $(foreach lib,$(2),$(call gb_StaticLibrary_get_target,$(lib)))
 177
 178 endef
 179
 180 # Make an external project depend on a Library
 181 #
 182 # Realistically there are some externals that do not have a usable build
 183 # system, and other externals that do may depend on those.
 184 #
 185 # gb_ExternalProject_use_libraries external libraries
 186 define gb_ExternalProject_use_libraries
 187 ifneq (,$$(filter-out $(gb_Library_KNOWNLIBS),$(2)))
 188 $$(eval $$(call gb_Output_info,currently known libraries are: $(sort $(gb_Library_KNOWNLIBS)),ALL))
 189 $$(eval $$(call gb_Output_error,Cannot link against library/libraries $$(filter-out $(gb_Library_KNOWNLIBS),$(2)). Libraries must be registered in Repository.mk or RepositoryExternal.mk))
 190 endif
 191 ifneq (,$$(filter $$(gb_MERGEDLIBS),$(2)))
 192 $$(eval $$(call gb_Output_error,Cannot link against library/libraries $$(filter $$(gb_MERGEDLIBS),$(2)) because they are merged.))
 193 endif
 194
 195 $(call gb_ExternalProject_get_preparation_target,$(1)) : \
 196         $(foreach lib,$(2),$(call gb_Library_get_target,$(lib)))
 197
 198 endef
 199
 200 # Make an external project depend on a Jar file
 201 #
 202 # gb_ExternalProject_use_jars external jars
 203 define gb_ExternalProject_use_jars
 204 $(call gb_ExternalProject_get_preparation_target,$(1)) : \
 205         $(foreach jar,$(2),$(call gb_Jar_get_target,$(jar)))
 206
 207 endef
 208
 209 # Run a target command
 210 #
 211 # This provides a wrapper that changes to the right directory,
 212 # touches the 'target' if successful and also provides
 213 # the ability to hide the output if there is no failure
 214 # gb_ExternalProject_run,run_target,command,optional_extra_sub_directory,optional_log_filename)
 215 # default log_filename is <run_target>.log
 216 #
 217
 218 define gb_ExternalProject_run
 219 $(if $(findstring YES,$(UNPACKED_IS_BIN_TARBALL)),\
 220         touch $@,
 221 $(call gb_Helper_print_on_error,cd $(EXTERNAL_WORKDIR)/$(3) && \
 222         unset Platform && \
 223         $(if $(WRAPPERS),export $(WRAPPERS) &&) \
 224         $(if $(NMAKE),export $(NMAKE) &&) \
 225         $(gb_COMPILER_SETUP) $(2) && touch $@,$(EXTERNAL_WORKDIR)/$(if $(3),$(3)/,)$(if $(4),$(4),$(1).log))
 226 )
 227 endef
 228
 229 # vim: set noet sw=4 ts=4: