include/svx/svdsnpv.hxx

   1 /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
   2 /*
   3  * This file is part of the LibreOffice project.
   4  *
   5  * This Source Code Form is subject to the terms of the Mozilla Public
   6  * License, v. 2.0. If a copy of the MPL was not distributed with this
   7  * file, You can obtain one at http://mozilla.org/MPL/2.0/.
   8  *
   9  * This file incorporates work covered by the following license notice:
  10  *
  11  *   Licensed to the Apache Software Foundation (ASF) under one or more
  12  *   contributor license agreements. See the NOTICE file distributed
  13  *   with this work for additional information regarding copyright
  14  *   ownership. The ASF licenses this file to you under the Apache
  15  *   License, Version 2.0 (the "License"); you may not use this file
  16  *   except in compliance with the License. You may obtain a copy of
  17  *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
  18  */
  19
  20 #pragma once
  21
  22 #include <svx/svdpntv.hxx>
  23 #include <svx/svdhlpln.hxx>
  24 #include <svx/svxdllapi.h>
  25 #include <tools/degree.hxx>
  26 #include <o3tl/typed_flags_set.hxx>
  27
  28 /**
  29  * Definition:
  30  *  - snap something means e.g. the mouse pointer or some marked objects in drag can be snapped
  31  *  - snap on something means you can e.g. snap on the grid or on auxiliary lines
  32  *
  33  *
  34  * Basically, we only catch visible elements (borders, helper lines, connectors),
  35  * with the exception of the grid. Likewise, we can only catch visible elements (i.e. connectors).
  36  * We only catch on the grid, if nothing else is close by (magnetic behaviour).
  37  *
  38  * The cursor which is used during creation of objects, while dragging polygon points
  39  * etc. (i.e. the mouse cursor) is always caught on all enabled catch alternatives (max 6).
  40  *
  41  * This is different, when moving selected objects. Instead of one mouse cursor, there are
  42  * four alternatives, which can be caught at the selected objects:
  43  *   1. the logically enclosing frame of every single object
  44  *   2. the logically enclosing frame of all selected objects
  45  *   3. highlighted points of all selected objects (polygon points, ...)
  46  *   4. the connectors of the selected objects
  47  *
  48  * As the first and second case exclude each other (the second is a refinement of the first one)
  49  * three alternatives remain, which are independent from each other. For 6 possible values for the
  50  * caught ones, we would end up with max. 18 different possible combinations!
  51  *
  52  * Therefore, we introduce the following simplifications:
  53  *   1. Connectors only catch on connectors
  54  *
  55  * Only max. 2*5+1 = 11 combinations remain for MoveDrag:
  56  *   1-3.  enclosing frame on grid/border/helper lines
  57  *   4.    enclosing frame on highlighted object points
  58  *   5.    enclosing frame on enclosing frame
  59  *   6-8.  highlighted points on grid/border/helper lines
  60  *   7.    highlighted points on highlighted object points
  61  *   8-10. highlighted points on enclosing frame
  62  *   11.   connectors on connectors
  63  *
  64  * We test for all of these possible 11 combinations in the MouseMove event in the DragMove
  65  * and those with the least need of correction are carried out.
  66  *
  67  * In the Resize() etc. methods we only catch the logically enclosing frame of the highlighted objects.
  68  */
  69
  70 /** Return value for SnapPos() method */
  71 enum class SdrSnap
  72 {
  73     NOTSNAPPED = 0x00,
  74     XSNAPPED   = 0x01,
  75     YSNAPPED   = 0x02
  76 };
  77 namespace o3tl
  78 {
  79     template<> struct typed_flags<SdrSnap> : is_typed_flags<SdrSnap, 3> {};
  80 }
  81
  82 // TODO SdrCrookMode::Stretch is not implemented yet!
  83 enum class SdrCrookMode {
  84     Rotate,
  85     Slant,
  86     Stretch
  87 };
  88
  89
  90 // #114409#-1 Migrate PageOrigin
  91 class ImplPageOriginOverlay;
  92
  93 class SVXCORE_DLLPUBLIC SdrSnapView : public SdrPaintView
  94 {
  95 protected:
  96     // #114409#-1 Migrate PageOrigin
  97     class ImplPageOriginOverlay*            mpPageOriginOverlay;
  98
  99     // #114409#-2 Migrate HelpLine
 100     class ImplHelpLineOverlay*              mpHelpLineOverlay;
 101
 102     Size maMagnSiz;
 103     Fraction maSnapWdtX;
 104     Fraction maSnapWdtY;
 105
 106     sal_uInt16 mnMagnSizPix;
 107     Degree100 mnSnapAngle;
 108     Degree100 mnEliminatePolyPointLimitAngle;
 109
 110     SdrCrookMode meCrookMode;
 111
 112     bool mbSnapEnab : 1;
 113     bool mbGridSnap : 1;
 114     bool mbBordSnap : 1;
 115     bool mbHlplSnap : 1;
 116     bool mbOFrmSnap : 1;
 117     bool mbOPntSnap : 1;
 118     bool mbOConSnap : 1;
 119     bool mbMoveSnapOnlyTopLeft : 1;    //  Special for dialogeditor
 120     bool mbOrtho : 1;
 121     bool mbBigOrtho : 1;
 122     bool mbAngleSnapEnab : 1;
 123     bool mbMoveOnlyDragging : 1;       // only move objects while Resize/Rotate/...
 124     bool mbSlantButShear : 1;          // use slant instead of shear
 125     bool mbCrookNoContortion : 1;      // no contorsion while Crook
 126     bool mbEliminatePolyPoints : 1;
 127
 128 protected:
 129     // #i71538# make constructors of SdrView sub-components protected to avoid incomplete incarnations which may get casted to SdrView
 130     SdrSnapView(
 131         SdrModel& rSdrModel,
 132         OutputDevice* pOut);
 133
 134     virtual ~SdrSnapView() override;
 135
 136 public:
 137     virtual bool IsAction() const override;
 138     virtual void MovAction(const Point& rPnt) override;
 139     virtual void EndAction() override;
 140     virtual void BckAction() override;
 141     virtual void BrkAction() override; // break actions for derived classes e.g. interrupt dragging.
 142     virtual void TakeActionRect(tools::Rectangle& rRect) const override;
 143
 144     void SetSnapGridWidth(const Fraction& rX, const Fraction& rY) { maSnapWdtX=rX; maSnapWdtY=rY; }
 145     const Fraction& GetSnapGridWidthX() const { return maSnapWdtX; }
 146     const Fraction& GetSnapGridWidthY() const { return maSnapWdtY; }
 147
 148     void SetSnapMagnetic(const Size& rSiz) { if (rSiz!=maMagnSiz) { maMagnSiz=rSiz; } }
 149     void SetSnapMagneticPixel(sal_uInt16 nPix) { mnMagnSizPix=nPix; }
 150     sal_uInt16 GetSnapMagneticPixel() const { return mnMagnSizPix; }
 151
 152     // RecalcLogicSnapMagnetic has to be called for every change of OutputDevices and every change of the MapMode!
 153     void RecalcLogicSnapMagnetic(const OutputDevice& rOut) { SetSnapMagnetic(rOut.PixelToLogic(Size(mnMagnSizPix,mnMagnSizPix))); }
 154     void SetActualWin(const OutputDevice* pWin) { SdrPaintView::SetActualWin(pWin); if (pWin!=nullptr) RecalcLogicSnapMagnetic(*pWin); }
 155
 156     // Coordinates referred to the view!
 157     // Returnvalues are SdrSnap::NOTSNAPPED,SdrSnap::XSNAPPED,
 158     // SdrSnap::YSNAPPED or SdrSnap::XYSNAPPED
 159     SdrSnap SnapPos(Point& rPnt, const SdrPageView* pPV) const;
 160     Point GetSnapPos(const Point& rPnt, const SdrPageView* pPV) const;
 161     void CheckSnap(const Point& rPt, tools::Long& nBestXSnap, tools::Long& nBestYSnap, bool& bXSnapped, bool& bYSnapped) const;
 162
 163     // All attitudes to snap are persistent.
 164     bool IsSnapEnabled() const { return mbSnapEnab; }
 165     bool IsGridSnap() const { return mbGridSnap; } // Snap to grid
 166     bool IsBordSnap() const { return mbBordSnap; } // Snap to border
 167     bool IsHlplSnap() const { return mbHlplSnap; } // Snap to auxiliary line
 168     bool IsOFrmSnap() const { return mbOFrmSnap; } // Snap to LogFram from surrounding drawing objects
 169     bool IsOPntSnap() const { return mbOPntSnap; } // Snap to distinct points from surrounding drawing objects
 170     bool IsOConSnap() const { return mbOConSnap; } // Snap to connectors of the drawing objects
 171     void SetSnapEnabled(bool bOn) { mbSnapEnab=bOn; }
 172     void SetGridSnap(bool bOn) { mbGridSnap=bOn; }
 173     void SetBordSnap(bool bOn) { mbBordSnap=bOn; }
 174     void SetHlplSnap(bool bOn) { mbHlplSnap=bOn; }
 175     void SetOFrmSnap(bool bOn) { mbOFrmSnap=bOn; }
 176     void SetOPntSnap(bool bOn) { mbOPntSnap=bOn; }
 177     void SetOConSnap(bool bOn) { mbOConSnap=bOn; }
 178
 179     // Usually every 4 corners of Object-SnapRects are snapped for Move-Dragging.
 180     // The following attitudes e.g. if you only want to snap the left corner on the top (e.g. DialogEditor)
 181     // persistent, Default=FALSE.
 182     void SetMoveSnapOnlyTopLeft(bool bOn) { mbMoveSnapOnlyTopLeft=bOn; }
 183     bool IsMoveSnapOnlyTopLeft() const { return mbMoveSnapOnlyTopLeft; }
 184
 185     // #114409#-1 Migrate PageOrigin
 186     void BegSetPageOrg(const Point& rPnt);
 187     void MovSetPageOrg(const Point& rPnt);
 188     void EndSetPageOrg();
 189     void BrkSetPageOrg();
 190     bool IsSetPageOrg() const { return (nullptr != mpPageOriginOverlay); }
 191
 192     // HitTest. If sal_True, in rnHelpLineNum is the number of the auxiliary line and in rpPv
 193     // the appended PageView.
 194     bool PickHelpLine(const Point& rPnt, short nTol, const OutputDevice& rOut, sal_uInt16& rnHelpLineNum, SdrPageView*& rpPV) const;
 195
 196     // Move of an available auxiliary line. Use nHelpLineNum and pPV from PickHelpLine.
 197     bool BegDragHelpLine(sal_uInt16 nHelpLineNum, SdrPageView* pPV);
 198     // interactive insertion of a new auxiliary line
 199     void BegDragHelpLine(const Point& rPnt, SdrHelpLineKind eNewKind);
 200     PointerStyle GetDraggedHelpLinePointer() const;
 201
 202     // change the type of auxiliary line while dragging
 203     // void SetDraggedHelpLineKind(SdrHelpLineKind eNewKind);
 204     void MovDragHelpLine(const Point& rPnt);
 205     bool EndDragHelpLine();
 206     void BrkDragHelpLine();
 207     bool IsDragHelpLine() const { return (nullptr != mpHelpLineOverlay); }
 208
 209     // SnapAngle is for angles in circle, RotateDragging, ...
 210     // The snapping of an angle is beared down, if it is switched off
 211     // with SetAngleSnapEnabled(sal_False)
 212     // The snapping angles is independent of snapping coordinates
 213     // and so independent of the attitude IsSnapEnabled()
 214     // Only values should be specified for them is applied:
 215     //     36000 modulo nAngle = 0
 216     // Implemented for:
 217     // - Rotate (Dragging)
 218     // - Shear (Dragging)
 219     // - circular arc/-sector/-section angle (Create and Dragging)
 220     // persistent.
 221     void SetAngleSnapEnabled(bool bOn) { mbAngleSnapEnab=bOn; }
 222     bool IsAngleSnapEnabled() const { return mbAngleSnapEnab; }
 223     void SetSnapAngle(Degree100 nAngle) { mnSnapAngle=nAngle; }
 224     Degree100 GetSnapAngle() const { return mnSnapAngle; }
 225
 226     // different effects from Ortho (depending on the context):
 227     // - Create
 228     //   - only lines in 45deg grid
 229     //   - instead of rectangles squares are created
 230     //   - instead of ellipse circles are created
 231     // - Dragging
 232     //   - general Dragging
 233     //     - Move only horizontal, vertical or 45deg
 234     //     - Resize proportional
 235     //     - Mirror: nothing
 236     //     - Shear without Resize
 237     //     - Crook without Resize
 238     //   - move handles
 239     //     - mirror axis only 45deg grid
 240     //   - object-specific Dragging
 241     //     - rectangle corner radius: nothing
 242     //     - circle object angle: nothing
 243     //     - line keeps while Dragging the angle and is only stretched/ contracted
 244     // Default value for Ortho is off. persistent.
 245     void SetOrtho(bool bOn) { mbOrtho=bOn; } // incomplete
 246     bool IsOrtho() const { return mbOrtho; }
 247
 248     // BigOrtho is only relevant if Ortho is switched on.
 249     // Example: rectangle is created and ortho is switched on (--> square)
 250     //   and the Mouse was dragged from zero to the coordinates
 251     //   (80,30). Now there are 2 alternatives to determine the edge length
 252     //   of the square: 30 and 80.
 253     //   The standard Ortho-Function took 30 (every time the smaller length)
 254     //   If BigOrtho is switched on, you get a square with edge length of 80.
 255     // The same also applies to Resize.
 256     // Default value for BigOrtho is on. persistent.
 257     void SetBigOrtho(bool bOn) { mbBigOrtho=bOn; }
 258     bool IsBigOrtho() const { return mbBigOrtho; }
 259
 260     // If MoveOnlyDragging=sal_True only the center of the marked objects is
 261     // transformed when Resize/Rotate/Shear/Mirror/Crook is executed.
 262     // Size, form and rotation angle of the objects are conserved only their positions
 263     // are changed. persistent. Default=FALSE. (ni)
 264     void SetMoveOnlyDragging(bool bOn) { mbMoveOnlyDragging=bOn; }
 265     bool IsMoveOnlyDragging() const { return mbMoveOnlyDragging; }
 266
 267     // Use Slant instead of Shear. persistent. Default=FALSE.
 268     void SetSlantButShear(bool bOn) { mbSlantButShear=bOn; }
 269     bool IsSlantButShear() const { return mbSlantButShear; }
 270
 271     // Don't contort object while Crook. persistent. Default=FALSE. (ni)
 272     void SetCrookNoContortion(bool bOn) { mbCrookNoContortion=bOn; }
 273     bool IsCrookNoContortion() const { return mbCrookNoContortion; }
 274
 275     // Crook-Mode. persistent. Default=SdrCrookMode::Rotate. (ni)
 276     void SetCrookMode(SdrCrookMode eMode) { meCrookMode=eMode; }
 277     SdrCrookMode GetCrookMode() const { return meCrookMode; }
 278
 279     // Special for IBM: While Dragging of a traverse station, it is deleted
 280     // if its adjacent lines are almost a solid line.
 281     void SetEliminatePolyPoints(bool bOn) { mbEliminatePolyPoints=bOn; }
 282     bool IsEliminatePolyPoints() const { return mbEliminatePolyPoints; }
 283     void SetEliminatePolyPointLimitAngle(Degree100 nAngle) { mnEliminatePolyPointLimitAngle=nAngle; }
 284     Degree100 GetEliminatePolyPointLimitAngle() const { return mnEliminatePolyPointLimitAngle; }
 285 };
 286
 287 /* vim:set shiftwidth=4 softtabstop=4 expandtab: */