Makefile.in

   1 # -*- Mode: makefile-gmake; tab-width: 4; indent-tabs-mode: t -*-
   2 #
   3 # This file is part of the LibreOffice project.
   4 #
   5 # This Source Code Form is subject to the terms of the Mozilla Public
   6 # License, v. 2.0. If a copy of the MPL was not distributed with this
   7 # file, You can obtain one at http://mozilla.org/MPL/2.0/.
   8 #
   9
  10 gb_Top_MODULE_CHECK_TARGETS := slowcheck unitcheck subsequentcheck perfcheck uicheck screenshot
  11
  12 .PHONY : check-if-root bootstrap gbuild build build-non-l10n-only build-l10n-only check clean clean-build clean-host test-install distclean distro-pack-install docs download etags fetch get-submodules id install install-gdb-printers install-strip tags debugrun help showmodules translations packageinfo internal.clean $(gb_Top_MODULE_CHECK_TARGETS)
  13
  14 MAKECMDGOALS?=build
  15 build_goal:=$(if $(filter build uicheck,$(MAKECMDGOALS)),build)\
  16  $(if $(filter check,$(MAKECMDGOALS)),unitcheck slowcheck subsequentcheck $(if $(filter Linux, $(shell uname)), uicheck))\
  17  $(filter build-l10n-only build-non-l10n-only debugrun help showmodules translations $(gb_Top_MODULE_CHECK_TARGETS) check packageinfo gbuildtojson,$(MAKECMDGOALS))
  18
  19 SRCDIR := @SRC_ROOT@
  20 BUILDDIR := @BUILDDIR@
  21 COMPILER_PLUGINS := @COMPILER_PLUGINS@
  22 GIT_BUILD := $(if $(wildcard $(SRCDIR)/.git),T)
  23
  24 # Run autogen.sh if needed and force make to restart itself.
  25 # ... but there are several cases where we do not want to run
  26 # autogen.sh:
  27 # 1. if we are building from tarballs, not git checkout (I do not
  28 #    think packagers would ever want that. I certainly do not.)
  29 # 2. if we are making help, clean or distclean, because they do not
  30 #    need updated configuration
  31 ifeq (,$(MAKE_RESTARTS)$(if $(GIT_BUILD),,T)$(if $(filter-out help showmodules clean distclean,$(MAKECMDGOALS)),,T))
  32
  33 # note: this must touch both Makefile and $(BUILDDIR)/Makefile, because make
  34 # may be invoked using either of these paths, and it will restart itself only
  35 # if the updated target is exactly the same path as the Makefile it is using
  36 .PHONY : force-restart
  37 Makefile $(BUILDDIR)/Makefile: $(BUILDDIR)/config_host.mk $(BUILDDIR)/config_host_lang.mk force-restart
  38         @touch $@
  39
  40 # run configure in an environment not polluted by config_host.mk
  41 $(BUILDDIR)/config_host.mk : $(wildcard \
  42                 $(SRCDIR)/autogen.sh \
  43                 $(SRCDIR)/config_host.mk.in \
  44                 $(SRCDIR)/config_host_lang.mk.in \
  45                 $(SRCDIR)/Makefile.in \
  46                 $(SRCDIR)/instsetoo_native/util/openoffice.lst.in \
  47                 $(SRCDIR)/configure.ac \
  48                 $(SRCDIR)/config_host/*.h.in \
  49                 $(SRCDIR)/download.lst \
  50                 $(SRCDIR)/m4/*.m4 \
  51                 $(BUILDDIR)/autogen.input \
  52                 $(BUILDDIR)/autogen.lastrun \
  53                 ) \
  54                 $(shell . $(SRCDIR)/bin/get_config_variables JAVA_HOME && \
  55                         if test -n "$${JAVA_HOME}" -a ! -d "$${JAVA_HOME}/bin"; then echo force-restart; fi)
  56         sh -c $(SRCDIR)/autogen.sh
  57
  58 else # MAKE_RESTARTS
  59
  60 .DEFAULT_GOAL := build
  61
  62 # Nested test is to check if the systemd-detect-virt command doesn't exist or it reports we're not
  63 # in a container:
  64 check-if-root:
  65         @if test ! `uname` = 'Haiku' -a `id -u` = 0; then \
  66                 if test ! -x "$$(command -v systemd-detect-virt)" || ! systemd-detect-virt -c -q; then \
  67                         echo; \
  68                         echo 'Building LibreOffice as root is a very bad idea, use a regular user.'; \
  69                         echo; \
  70                         exit 1; \
  71                 fi \
  72         fi
  73
  74 gb_Side ?= host
  75
  76 include $(BUILDDIR)/config_$(gb_Side).mk
  77
  78 export GMAKE_OPTIONS?=-r$(if $(verbose),,s)$(value $(MAKEFLAGS))
  79
  80 PARALLELISM_OPTION := $(if $(filter-out 0,$(PARALLELISM)),-j $(PARALLELISM),)
  81
  82 IWYU_OPTION := $(if $(IWYU_PATH),-k CC=$(IWYU_PATH) CXX=$(IWYU_PATH),)
  83
  84 # don't want to have a dependency to iwyudummy.generate because it's
  85 # useful to manually edit the generated StaticLibrary_iwyudummy.mk
  86 iwyudummy: bootstrap fetch
  87         $(if $(wildcard $(BUILDDIR)/iwyudummy),,$(error first call "make iwyudummy.generate"))
  88         cd $(BUILDDIR)/iwyudummy && $(MAKE) $(IWYU_OPTION) $(GMAKE_OPTIONS)
  89
  90 iwyudummy.generate:
  91         $(SRCDIR)/bin/gen-iwyu-dummy-lib
  92
  93 #
  94 # Partial Build
  95 #
  96 define gb_Top_GbuildModuleRules
  97 .PHONY: $(1) $(1).build $(1).all $(1).check $(1).clean $(1).showdeliverables $(foreach target,$(gb_Top_MODULE_CHECK_TARGETS),$(1).$(target))
  98 .PHONY: $(1).allbuild $(1).buildall $(1).allcheck $(1).checkall
  99
 100 $(1): bootstrap fetch
 101         cd $(SRCDIR)/$(2) && $$(MAKE) $(IWYU_OPTION) $(PARALLELISM_OPTION) $(GMAKE_OPTIONS)
 102
 103 $(1).build $(1).check $(foreach target,$(gb_Top_MODULE_CHECK_TARGETS),$(1).$(target)): bootstrap fetch
 104         cd $(SRCDIR)/$(2) && $$(MAKE) $(PARALLELISM_OPTION) $(GMAKE_OPTIONS) $$(patsubst $(1).%,%,$$@)
 105
 106 $(1).clean $(1).showdeliverables:
 107         cd $(SRCDIR)/$(2) && $$(MAKE) $(PARALLELISM_OPTION) $(GMAKE_OPTIONS) $$(patsubst $(1).%,%,$$@)
 108
 109 $(1).allbuild $(1).buildall: bootstrap fetch
 110         $$(MAKE) $(PARALLELISM_OPTION) $(IWYU_OPTION) $(GMAKE_OPTIONS) -f $(SRCDIR)/Makefile.gbuild $(WORKDIR)/Module/$(1)
 111
 112 $(1).allcheck $(1).checkall: bootstrap fetch
 113         $$(MAKE) $(PARALLELISM_OPTION) $(IWYU_OPTION) $(GMAKE_OPTIONS) -f $(SRCDIR)/Makefile.gbuild $(WORKDIR)/Module/$(1) $(WORKDIR)/Module/check/$(1) $(WORKDIR)/Module/slowcheck/$(1)
 114
 115 $(1).all:
 116         @echo "'make $(1).all' was renamed to 'make $(1).allcheck' (or use 'make $(1).allbuild' to build without unit tests)"
 117         @exit 42
 118
 119 endef
 120
 121 define gb_Top_GbuildModulesRules
 122 $(foreach m,$(1),$(call gb_Top_GbuildModuleRules,$(notdir $(m)),$(m)))
 123 endef
 124
 125 gbuild_modules := $(patsubst $(SRCDIR)/%/,%,$(dir $(wildcard $(SRCDIR)/*/Module_*.mk $(SRCDIR)/external/*/Module_*.mk)))
 126
 127 gbuild_internal_modules := $(filter-out odk external,$(patsubst $(SRCDIR)/%/,%,$(dir $(wildcard $(SRCDIR)/*/Module_*.mk))))
 128
 129 internal.clean: $(addsuffix .clean,$(gbuild_internal_modules))
 130
 131
 132 $(eval $(call gb_Top_GbuildModulesRules,$(gbuild_modules)))
 133
 134 gbuild_TARGETS := AllLangHelp \
 135         AllLangMoTarget \
 136         AllLangPackage \
 137         AutoInstall \
 138         CliLibrary \
 139         CliNativeLibrary \
 140         CliUnoApi \
 141         CompilerTest \
 142     ComponentTarget \
 143         Configuration \
 144         CppunitTest \
 145         CustomTarget \
 146         Dictionary \
 147         Executable \
 148         Extension \
 149         ExtensionPackage \
 150         ExtensionPackageSet \
 151         ExternalPackage \
 152         ExternalProject \
 153         Gallery \
 154         GeneratedPackage \
 155         InstallModule \
 156         InstallScript \
 157         InternalUnoApi \
 158         Jar \
 159         JunitTest \
 160         Library \
 161         Module \
 162         Package \
 163         PackageSet \
 164         Pagein \
 165         Postprocess \
 166         Pyuno \
 167         PythonTest \
 168         Rdb \
 169         SdiTarget \
 170         StaticLibrary \
 171         UIConfig \
 172         UITest \
 173         UnoApi \
 174         UnpackedTarball \
 175         WinResTarget \
 176         Zip \
 177
 178 # build a generic gbuild target
 179 $(foreach target,$(gbuild_TARGETS),$(target)_% $(foreach module,$(gbuild_modules),$(target)_$(module)/%)) UIConfig_modules/% %.genpatch: bootstrap fetch
 180         $(MAKE) $(PARALLELISM_OPTION) $(GMAKE_OPTIONS) -f $(SRCDIR)/Makefile.gbuild $@
 181
 182 $(gbuild_TARGETS):
 183         $(MAKE) $(PARALLELISM_OPTION) $(GMAKE_OPTIONS) -f $(SRCDIR)/Makefile.gbuild $@
 184
 185 #
 186 # Clean
 187 #
 188 clean: clean-host clean-build
 189
 190 clean-host:
 191         rm -fr $(TESTINSTALLDIR)
 192         rm -fr $(INSTDIR)
 193         rm -fr $(WORKDIR)
 194
 195 clean-build:
 196 ifneq ($(CROSS_COMPILING),)
 197         rm -fr $(INSTDIR_FOR_BUILD)
 198         rm -fr $(WORKDIR_FOR_BUILD)
 199 ifeq ($(OS),ANDROID)
 200         rm -fr $(BUILDDIR)/android/obj
 201         rm -fr $(BUILDDIR)/android/jniLibs
 202         rm -fr $(SRCDIR)/android/source/build
 203         rm -fr $(SRCDIR)/android/source/assets
 204         rm -fr $(SRCDIR)/android/source/assets_fullUI
 205         rm -fr $(SRCDIR)/android/source/assets_strippedUI
 206 endif
 207 endif
 208
 209 include $(SRCDIR)/compilerplugins/Makefile.mk
 210
 211 #
 212 # Distclean
 213 #
 214 distclean : clean compilerplugins-clean
 215         rm -fr \
 216         $(BUILDDIR)/Makefile \
 217         $(BUILDDIR)/aclocal.m4 \
 218         $(BUILDDIR)/autom4te.cache \
 219         $(BUILDDIR)/bin/bffvalidator.sh \
 220         $(BUILDDIR)/bin/odfvalidator.sh \
 221         $(BUILDDIR)/bin/officeotron.sh \
 222         $(BUILDDIR)/config.Build.log \
 223         $(BUILDDIR)/config.Build.warn \
 224         $(BUILDDIR)/config.log \
 225         $(BUILDDIR)/config.status \
 226         $(BUILDDIR)/config.warn \
 227         $(BUILDDIR)/config_build.mk \
 228         $(BUILDDIR)/config_build_lang.mk \
 229         $(BUILDDIR)/config_build \
 230         $(BUILDDIR)/config_host.mk \
 231         $(BUILDDIR)/config_host.mk.stamp \
 232         $(BUILDDIR)/config_host_lang.mk \
 233         $(BUILDDIR)/config_host_lang.mk.stamp \
 234         $(BUILDDIR)/config_host/*.h \
 235         $(BUILDDIR)/configure \
 236         $(BUILDDIR)/hardened_runtime.xcent \
 237         $(BUILDDIR)/instsetoo_native/util/openoffice.lst \
 238         $(BUILDDIR)/solenv/lockfile/autoconf.h \
 239         $(BUILDDIR)/sysui/desktop/macosx/Info.plist \
 240         $(BUILDDIR)/vs-code*.code-workspace*
 241         $(if $(filter WNT,$(OS)),env -i PATH="$$PATH") $(FIND) $(SRCDIR)/solenv/gdb -name \*.pyc -exec rm -f {} \;
 242
 243 #
 244 # custom command
 245 #
 246 cmd:
 247         $(if $(verbose),echo "custom cmd" &&) ( $(cmd) )
 248
 249 #
 250 # Fetch
 251 #
 252 ifneq ($(DO_FETCH_TARBALLS),)
 253 include $(SRCDIR)/Makefile.fetch
 254 fetch: download
 255 fetch: get-submodules
 256
 257 ifneq (,$(wildcard $(SRCDIR)/.git))
 258 get-submodules:
 259 ifneq ($(foreach i,$(GIT_NEEDED_SUBMODULES),$(SRCDIR)/$(i)/.git),$(wildcard $(foreach i,$(GIT_NEEDED_SUBMODULES),$(SRCDIR)/$(i)/.git)))
 260         cd $(SRCDIR) && ./g -f clone
 261 endif
 262 ifeq ($(shell test -d $(SRCDIR)/.git; echo $$?),0)
 263         @cd $(SRCDIR) && ./g -z # make sure the git hooks are in place even if no submodules are needed
 264 endif
 265
 266 else # these sources are from a tarball, so get the other source tarballs
 267 gb_LO_VER := $(shell . $(SRCDIR)/sources.ver && echo $$lo_sources_ver)
 268 $(if $(gb_LO_VER),,$(error Error while retrieving $$lo_sources_ver from $(SRCDIR)/sources.ver))
 269
 270 get-submodules: | download
 271 ifneq ($(foreach i,$(subst helpcontent2,help,$(GIT_NEEDED_SUBMODULES)),$(SRCDIR)/src/libreoffice-$(i)-$(gb_LO_VER)),$(wildcard $(foreach i,$(subst helpcontent2,help,$(GIT_NEEDED_SUBMODULES)),$(SRCDIR)/src/libreoffice-$(i)-$(gb_LO_VER))))
 272         $(foreach i,$(subst helpcontent2,help,$(GIT_NEEDED_SUBMODULES)),\
 273                 $(call fetch_Download_item_unchecked,http://download.documentfoundation.org/libreoffice/src/$(shell echo $(gb_LO_VER) | sed -e "s/\([0-9]*\.[0-9]*\.[0-9]*\).*/\1/"),libreoffice-$(i)-$(gb_LO_VER).tar.xz))
 274         $(SRCDIR)/bin/unpack-sources $(SRCDIR) $(foreach i,$(subst helpcontent2,help,$(GIT_NEEDED_SUBMODULES)),\
 275                 $(TARFILE_LOCATION)/libreoffice-$(i)-$(gb_LO_VER).tar.xz)
 276 endif
 277
 278 endif
 279
 280 else
 281 fetch:
 282         @echo "Automatic fetching of external tarballs is disabled."
 283
 284 endif
 285
 286 #
 287 # Bootstrap
 288 #
 289 bootstrap: check-if-root compilerplugins
 290
 291 #
 292 # Build
 293 #
 294 # Note: this will pipe through all gbuild targets to ... gbuild
 295 #       with some translations like "check"->"unitcheck subsequentcheck uicheck" for historic reasons
 296 #
 297 build: bootstrap fetch $(if $(CROSS_COMPILING),cross-toolset,install-gdb-printers) \
 298     $(if $(filter check,$(MAKECMDGOALS)),$(if $(COMPILER_PLUGINS),$(if $(LODE_HOME),clang-format-check)))
 299         $(MAKE) $(PARALLELISM_OPTION) $(IWYU_OPTION) $(GMAKE_OPTIONS) -f $(SRCDIR)/Makefile.gbuild $(build_goal)
 300 ifeq ($(OS),iOS)
 301         $(MAKE) $(PARALLELISM_OPTION) $(GMAKE_OPTIONS) ios
 302 endif
 303
 304 build-non-l10n-only build-l10n-only check debugrun translations packageinfo $(gb_Top_MODULE_CHECK_TARGETS): build
 305
 306 help showmodules gbuildtojson:
 307         $(MAKE) $(PARALLELISM_OPTION) $(GMAKE_OPTIONS) -f $(SRCDIR)/Makefile.gbuild $@
 308
 309 cross-toolset: bootstrap fetch install-gdb-printers
 310 # fetch again in case there are externals only needed on build platform
 311 ifneq ($(OS),iOS)
 312         $(MAKE) gb_Side=build $(PARALLELISM_OPTION) $(GMAKE_OPTIONS) -f $(BUILDDIR)/Makefile fetch
 313 endif
 314         $(MAKE) gb_Side=build $(PARALLELISM_OPTION) $(GMAKE_OPTIONS) -f $(SRCDIR)/Makefile.gbuild build-tools
 315
 316 install-gdb-printers:
 317 ifneq ($(filter-out WNT MACOSX iOS,$(OS)),)
 318 ifneq ($(INSTDIR_FOR_BUILD),$(INSTDIR))
 319         mkdir -p $(INSTDIR_FOR_BUILD)
 320         $(SRCDIR)/solenv/bin/install-gdb-printers -a $(INSTDIR_FOR_BUILD) -c
 321 endif
 322         mkdir -p $(INSTDIR)
 323         $(SRCDIR)/solenv/bin/install-gdb-printers -a $(INSTDIR) -c
 324 endif
 325
 326
 327 #
 328 # Install
 329 #
 330
 331 define gb_Top_DoInstall
 332 echo "$(1) in $(INSTALLDIR) ..." && \
 333 $(SRCDIR)/solenv/bin/ooinstall $(2) "$(INSTALLDIR)"
 334
 335 endef
 336
 337 ifneq ($(OS),MACOSX)
 338 define gb_Top_InstallFinished
 339 echo && echo "If you want to edit the .ui files with glade first execute:" && \
 340 echo && echo "export GLADE_CATALOG_SEARCH_PATH=$(2)/share/glade" && \
 341 echo && echo "$(1) finished, you can now execute:" && \
 342 echo "$(2)/program/soffice"
 343
 344 endef
 345 else
 346 define gb_Top_InstallFinished
 347 echo && echo "$(1) finished, you can now run: " && \
 348 echo "open $(2)/$(PRODUCTNAME).app" && \
 349 echo "" && \
 350 echo "To debug: gdb $(2)/$(PRODUCTNAME).app/Contents/MacOS/soffice"
 351
 352 endef
 353 endif
 354
 355 ifneq ($(OS),MACOSX)
 356 install:
 357         @$(call gb_Top_DoInstall,Installing,)
 358         @$(call gb_Top_InstallFinished,Installation,$(INSTALLDIR))
 359
 360 install-strip:
 361         @$(call gb_Top_DoInstall,Installing and stripping binaries,--strip)
 362         @$(call gb_Top_InstallFinished,Installation,$(INSTALLDIR))
 363 endif # !MACOSX
 364
 365 test-install: build
 366         @rm -rf $(TESTINSTALLDIR)
 367         @mkdir -p $(TESTINSTALLDIR)
 368 ifeq ($(OS_FOR_BUILD),WNT)
 369         cd $(SRCDIR)/instsetoo_native && $(MAKE) LIBO_TEST_INSTALL=TRUE $(GMAKE_OPTIONS)
 370 else
 371         @$(SRCDIR)/solenv/bin/ooinstall $(TESTINSTALLDIR)
 372 ifeq ($(OS),MACOSX)
 373 #
 374 # Create Resources/*.lproj directories for languages supported by macOS
 375         set -x; for lang in ca cs da de el en es fi fr hr hu id it ja ko ms nl no pl pt pt_PT ro ru sk sv th tr uk vi zh_CN zh_TW; do \
 376                 lproj=$(TESTINSTALLDIR)/$(PRODUCTNAME_WITHOUT_SPACES).app/Contents/Resources/$$lang.lproj; \
 377                 mkdir "$$lproj"; \
 378         done
 379 #
 380 # Remove unnecessary executables in the LibreOfficePython framework
 381         rm -rf $(TESTINSTALLDIR)/$(PRODUCTNAME_WITHOUT_SPACES).app/Contents/Frameworks/LibreOfficePython.framework/Versions/[1-9]*/bin
 382 #
 383 # Remove the python.o object file which is weird and interferes with app store uploading
 384 # And with it removed, presumably the other stuff in the Python lib/python3.3/config-3.3m probably does not make sense either.
 385         rm -rf $(TESTINSTALLDIR)/$(PRODUCTNAME_WITHOUT_SPACES).app/Contents/Frameworks/LibreOfficePython.framework/Versions/[1-9]*/lib/python[1-9]*/config-[1-9]*
 386 #
 387 ifneq ($(ENABLE_MACOSX_SANDBOX),)
 388
 389 # Remove the gengal binary that we hardly need and the shell scripts
 390 # for which code signatures (stored as extended attributes) won't
 391 # survive upload to the App Store anyway. See
 392 # https://developer.apple.com/library/content/documentation/Security/Conceptual/CodeSigningGuide/Procedures/Procedures.html#//apple_ref/doc/uid/TP40005929-CH4-TNTAG201
 393 # We could put the shell scripts somewhere in Resources instead, but
 394 # no 3rd-party code that would be interested in them would look there
 395 # anyway.
 396         rm $(TESTINSTALLDIR)/$(PRODUCTNAME_WITHOUT_SPACES).app/Contents/MacOS/gengal
 397         rm $(TESTINSTALLDIR)/$(PRODUCTNAME_WITHOUT_SPACES).app/Contents/MacOS/unopkg
 398         rm $(TESTINSTALLDIR)/$(PRODUCTNAME_WITHOUT_SPACES).app/Contents/MacOS/unoinfo
 399 endif
 400 #
 401 ifneq ($(MACOSX_CODESIGNING_IDENTITY),)
 402 # Then use the macosx-codesign-app-bundle script
 403         @$(SRCDIR)/solenv/bin/macosx-codesign-app-bundle $(TESTINSTALLDIR)/$(PRODUCTNAME_WITHOUT_SPACES).app
 404 endif
 405 endif
 406 endif
 407         @$(call gb_Top_InstallFinished,Test Installation,$(TESTINSTALLDIR))
 408
 409 mac-app-store-package: test-install
 410 ifneq ($(MACOSX_PACKAGE_SIGNING_IDENTITY),)
 411         rm -rf "$(PRODUCTNAME).app"
 412         mv "$(TESTINSTALLDIR)/$(PRODUCTNAME_WITHOUT_SPACES).app" "$(PRODUCTNAME).app"
 413         productbuild --component "$(PRODUCTNAME).app" /Applications --sign $(MACOSX_PACKAGE_SIGNING_IDENTITY) $(PRODUCTNAME_WITHOUT_SPACES).pkg
 414 else
 415         @echo You did not provide an installer signing identity with --enable-macosx-package-signing
 416         @exit 1
 417 endif
 418
 419 distro-pack-install: install
 420         $(SRCDIR)/bin/distro-install-clean-up
 421         $(SRCDIR)/bin/distro-install-desktop-integration
 422         $(SRCDIR)/bin/distro-install-sdk
 423         $(SRCDIR)/bin/distro-install-file-lists
 424
 425 install-package-%:
 426         $(MAKE) $(GMAKE_OPTIONS) -f $(SRCDIR)/Makefile.gbuild $@
 427
 428 id:
 429         @$(SRCDIR)/solenv/bin/create-ids
 430
 431 tags:
 432         @$(SRCDIR)/solenv/bin/create-tags
 433
 434 etags:
 435         @$(SRCDIR)/solenv/bin/create-tags -e
 436
 437 docs:
 438         @$(SRCDIR)/solenv/bin/mkdocs.sh $(SRCDIR)/docs $(SRCDIR)/solenv/inc/doxygen.cfg
 439
 440 findunusedheaders:
 441         $(SRCDIR)/bin/find-unusedheaders.py
 442
 443 symbols:
 444         rm -fr $(WORKDIR)/symbols/
 445         mkdir -p $(WORKDIR)/symbols/
 446 ifeq ($(OS),WNT)
 447         $(SRCDIR)/bin/symbolstore.py $(WORKDIR)/UnpackedTarball/breakpad/src/tools/windows/dump_syms/Release/dump_syms.exe $(WORKDIR)/symbols/ $(INSTDIR)/program/
 448         $(SRCDIR)/bin/symstore.sh
 449 else
 450         $(SRCDIR)/bin/symbolstore.py $(WORKDIR)/UnpackedTarball/breakpad/src/tools/linux/dump_syms/dump_syms $(WORKDIR)/symbols/ $(INSTDIR)/program/*
 451 endif
 452
 453         cd $(WORKDIR)/symbols/ && zip -r $(WORKDIR)/symbols.zip *
 454
 455 create-mar:
 456         rm -fr $(WORKDIR)/installation/mar/
 457         rm -fr $(WORKDIR)/installation/temp/
 458         mkdir -p $(WORKDIR)/installation/temp/
 459         mkdir -p $(WORKDIR)/installation/mar/
 460         tar -xzf $(WORKDIR)/installation/LibreOfficeDev/archive/install/en-US/LibreOffice* -C $(WORKDIR)/installation/temp/
 461         $(SRCDIR)/bin/update/make_full_update.sh $(WORKDIR)/installation/mar/test.mar $(WORKDIR)/installation/temp/*/
 462
 463 upload-symbols:
 464         $(MAKE) -f $(SRCDIR)/Makefile.gbuild upload-symbols
 465
 466 create-update-info:
 467         $(MAKE) -f $(SRCDIR)/Makefile.gbuild create-update-info
 468
 469 upload-update-info:
 470         $(MAKE) -f $(SRCDIR)/Makefile.gbuild upload-update-info
 471
 472 create-partial-info:
 473         $(MAKE) -f $(SRCDIR)/Makefile.gbuild create-partial-info
 474
 475 dump-deps:
 476         @$(SRCDIR)/bin/module-deps.pl $(if $(verbose),-v) $(MAKE) $(SRCDIR)/Makefile.gbuild
 477
 478 dump-deps-png:
 479         @$(SRCDIR)/bin/module-deps.pl $(if $(verbose),-v) $(MAKE) $(SRCDIR)/Makefile.gbuild | dot -Tpng -o lo.png
 480
 481 dump-deps-sort:
 482         @$(SRCDIR)/bin/module-deps.pl -t $(if $(verbose),-v) $(MAKE) $(SRCDIR)/Makefile.gbuild
 483
 484 clang-format-check:
 485         @$(SRCDIR)/solenv/clang-format/check-last-commit
 486
 487 define gb_Top_GbuildToIdeIntegration
 488 $(1)-ide-integration: gbuildtojson $(if $(filter MACOSX,$(OS_FOR_BUILD)),python3.allbuild)
 489         cd $(SRCDIR) && \
 490                 $(if $(filter MACOSX,$(OS_FOR_BUILD)),PATH="$(INSTROOT_FOR_BUILD)/Frameworks/LibreOfficePython.framework/Versions/Current/bin:$(PATH)") \
 491                 bin/gbuild-to-ide --ide $(1) --make $(MAKE)
 492
 493 endef
 494
 495 $(foreach ide,\
 496         codelite \
 497         vs \
 498         kdevelop \
 499         vim \
 500         qtcreator \
 501         xcode \
 502         eclipsecdt,\
 503 $(eval $(call gb_Top_GbuildToIdeIntegration,$(ide))))
 504
 505 # vscode integration is based on compile_commands.json, which is generated by vim-ide-integration
 506 # the workspace template created by configure doesn't provide advanced/fine grained targets but
 507 # rather supplies some useful settings and basic examples for run/debug configurations
 508 # this target is provided primarily for consistency with the other ide-integrations
 509 vscode-ide-integration: $(BUILDDIR)/vs-code.code-workspace vim-ide-integration
 510
 511 $(BUILDDIR)/vs-code.code-workspace: $(BUILDDIR)/vs-code.code-workspace.template
 512         @test -e $@ || cp $< $@ && \
 513         cmp -s $@ $< || echo "ATTN: $(@F) differs from $(<F), please check yourself for changes"
 514
 515 endif # MAKE_RESTARTS
 516
 517 # vim: set noet sw=4 ts=4: