fix remapping behavior. Remapping is only necessary if we are rendering on the workbe...
[AROS-Contrib.git] / regina / install-sh
blob6b7d9f5ed05245cbf913566be603072a6260f29f
1 #! /bin/sh
3 # install - install a program, script, or datafile
4 # This comes from X11R5 (mit/util/scripts/install.sh).
6 # Copyright 1991 by the Massachusetts Institute of Technology
8 # Permission to use, copy, modify, distribute, and sell this software and its
9 # documentation for any purpose is hereby granted without fee, provided that
10 # the above copyright notice appear in all copies and that both that
11 # copyright notice and this permission notice appear in supporting
12 # documentation, and that the name of M.I.T. not be used in advertising or
13 # publicity pertaining to distribution of the software without specific,
14 # written prior permission. M.I.T. makes no representations about the
15 # suitability of this software for any purpose. It is provided "as is"
16 # without express or implied warranty.
18 # Calling this script install-sh is preferred over install.sh, to prevent
19 # `make' implicit rules from creating a file called install from it
20 # when there is no Makefile.
22 # This script is compatible with the BSD install script, but was written
23 # from scratch. It can only install one file at a time, a restriction
24 # shared with many OS's install programs.
27 # set DOITPROG to echo to test this script
29 # Don't use :- since 4.3BSD and earlier shells don't like it.
31 # Modified 1 Feb 2000 MHES to cater for mkdir -p
33 doit="${DOITPROG-}"
36 # put in absolute paths if you don't have them in your path; or use env. vars.
38 mvprog="${MVPROG-mv}"
39 cpprog="${CPPROG-cp}"
40 chmodprog="${CHMODPROG-chmod}"
41 chownprog="${CHOWNPROG-chown}"
42 chgrpprog="${CHGRPPROG-chgrp}"
43 stripprog="${STRIPPROG-strip}"
44 rmprog="${RMPROG-rm}"
45 mkdirprog="${MKDIRPROG-mkdir}"
47 transformbasename=""
48 transform_arg=""
49 instcmd="$mvprog"
50 chmodcmd="$chmodprog 0755"
51 chowncmd=""
52 chgrpcmd=""
53 stripcmd=""
54 rmcmd="$rmprog -f"
55 mvcmd="$mvprog"
56 mkdircmd="$mkdirprog -p"
57 src=""
58 dst=""
59 dir_arg=""
61 while [ x"$1" != x ]; do
62 case $1 in
63 -c) instcmd="$cpprog"
64 shift
65 continue;;
67 -d) dir_arg=true
68 shift
69 continue;;
71 -m) chmodcmd="$chmodprog $2"
72 shift
73 shift
74 continue;;
76 -o) chowncmd="$chownprog $2"
77 shift
78 shift
79 continue;;
81 -g) chgrpcmd="$chgrpprog $2"
82 shift
83 shift
84 continue;;
86 -s) stripcmd="$stripprog"
87 shift
88 continue;;
90 -t=*) transformarg=`echo $1 | sed 's/-t=//'`
91 shift
92 continue;;
94 -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
95 shift
96 continue;;
98 *) if [ x"$src" = x ]
99 then
100 src=$1
101 else
102 # this colon is to work around a 386BSD /bin/sh bug
104 dst=$1
106 shift
107 continue;;
108 esac
109 done
111 if [ x"$src" = x ]
112 then
113 echo "install: no input file specified"
114 exit 1
115 else
116 true
119 if [ x"$dir_arg" != x ]; then
120 dst=$src
121 src=""
123 if [ -d $dst ]; then
124 instcmd=:
125 else
126 instcmd=mkdir
128 else
130 # Waiting for this to be detected by the "$instcmd $src $dsttmp" command
131 # might cause directories to be created, which would be especially bad
132 # if $src (and thus $dsttmp) contains '*'.
134 if [ -f $src -o -d $src ]
135 then
136 true
137 else
138 echo "install: $src does not exist"
139 exit 1
142 if [ x"$dst" = x ]
143 then
144 echo "install: no destination specified"
145 exit 1
146 else
147 true
150 # If destination is a directory, append the input filename; if your system
151 # does not like double slashes in filenames, you may need to add some logic
153 if [ -d $dst ]
154 then
155 dst="$dst"/`basename $src`
156 else
157 true
161 ## this sed command emulates the dirname command
162 dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
164 # Make sure that the destination directory exists.
165 # this part is taken from Noah Friedman's mkinstalldirs script
167 # Skip lots of stat calls in the usual case.
168 if [ ! -d "$dstdir" ]; then
169 defaultIFS='
171 IFS="${IFS-${defaultIFS}}"
173 oIFS="${IFS}"
174 # Some sh's can't handle IFS=/ for some reason.
175 IFS='%'
176 set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
177 IFS="${oIFS}"
179 pathcomp=''
181 while [ $# -ne 0 ] ; do
182 pathcomp="${pathcomp}${1}"
183 shift
185 if [ ! -d "${pathcomp}" ] ;
186 then
187 $mkdircmd "${pathcomp}"
188 else
189 true
192 pathcomp="${pathcomp}/"
193 done
196 if [ x"$dir_arg" != x ]
197 then
198 $doit $instcmd $dst &&
200 if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
201 if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
202 if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
203 if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
204 else
206 # If we're going to rename the final executable, determine the name now.
208 if [ x"$transformarg" = x ]
209 then
210 dstfile=`basename $dst`
211 else
212 dstfile=`basename $dst $transformbasename |
213 sed $transformarg`$transformbasename
216 # don't allow the sed command to completely eliminate the filename
218 if [ x"$dstfile" = x ]
219 then
220 dstfile=`basename $dst`
221 else
222 true
225 # Make a temp file name in the proper directory.
227 dsttmp=$dstdir/#inst.$$#
229 # Move or copy the file name to the temp name
231 $doit $instcmd $src $dsttmp &&
233 trap "rm -f ${dsttmp}" 0 &&
235 # and set any options; do chmod last to preserve setuid bits
237 # If any of these fail, we abort the whole thing. If we want to
238 # ignore errors from any of these, just make sure not to ignore
239 # errors from the above "$doit $instcmd $src $dsttmp" command.
241 if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
242 if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
243 if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
244 if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
246 # Now rename the file to the real destination.
248 $doit $rmcmd -f $dstdir/$dstfile &&
249 $doit $mvcmd $dsttmp $dstdir/$dstfile
251 fi &&
254 exit 0