1 # Makefile for Vim on Unix and Unix-like systems vim:ts=8:sw=8:tw=78
3 # This Makefile is loosely based on the GNU Makefile conventions found in
6 # Compiling Vim, summary:
11 # Compiling Vim, details:
13 # Edit this file for adjusting to your system. You should not need to edit any
14 # other file for machine specific things!
15 # The name of this file MUST be Makefile (note the uppercase 'M').
17 # 1. Edit this Makefile {{{1
18 # The defaults for Vim should work on most machines, but you may want to
19 # uncomment some lines or make other changes below to tune it to your
20 # system, compiler or preferences. Uncommenting means that the '#' in
21 # the first column of a line is removed.
22 # - If you want a version of Vim that is small and starts up quickly,
23 # you might want to disable the GUI, X11, Perl, ECL, Python and Tcl.
24 # - Uncomment the line with --disable-gui if you have Motif, GTK and/or
25 # Athena but don't want to make gvim (the GUI version of Vim with nice
26 # menus and scrollbars, but makes Vim bigger and startup slower).
27 # - Uncomment --disable-darwin if on Mac OS X but you want to compile a
29 # - Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but
30 # want to disable using X11 libraries. This speeds up starting Vim,
31 # but the window title will not be set and the X11 selection can not
33 # - Uncomment the line "CONF_OPT_XSMP = --disable-xsmp" if you have the
34 # X11 Session Management Protocol (XSMP) library (libSM) but do not
36 # This can speedup Vim startup but Vim loses the ability to catch the
37 # user logging out from session-managers like GNOME and work
39 # - Uncomment one or more of these lines to include an interface;
40 # each makes Vim quite a bit bigger:
41 # --enable-perlinterp for Perl interpreter
42 # --enable-pythoninterp for Python interpreter
43 # --enable-eclinterp for ECL compiler
44 # --enable-rubyinterp for Ruby interpreter
45 # --enable-tclinterp for Tcl interpreter
46 # --enable-cscope for Cscope interface
47 # - Uncomment one of the lines with --with-features= to enable a set of
48 # features (but not the interfaces just mentioned).
49 # - Uncomment the line with --disable-acl to disable ACL support even
50 # though your system supports it.
51 # - Uncomment the line with --disable-gpm to disable gpm support
52 # even though you have gpm libraries and includes.
53 # - Uncomment the line with --disable-sysmouse to disable sysmouse
54 # support even though you have /dev/sysmouse and includes.
55 # - Uncomment one of the lines with CFLAGS and/or CC if you have
56 # something very special or want to tune the optimizer.
57 # - Search for the name of your system to see if it needs anything
59 # - A few versions of make use '.include "file"' instead of 'include
60 # file'. Adjust the include line below if yours does.
62 # 2. Edit feature.h {{{1
63 # Only if you do not agree with the default compile features, e.g.:
64 # - you want Vim to be as vi compatible as it can be
65 # - you want to use Emacs tags files
66 # - you want right-to-left editing (Hebrew)
67 # - you want 'langmap' support (Greek)
68 # - you want to remove features to make Vim smaller
71 # Will first run ./configure with the options in this file. Then it will
72 # start make again on this Makefile to do the compiling. You can also do
73 # this in two steps with:
76 # The configuration phase creates/overwrites auto/config.h and
78 # The configure script is created with "make autoconf". It can detect
79 # different features of your system and act accordingly. However, it is
80 # not correct for all systems. Check this:
81 # - If you have X windows, but configure could not find it or reported
82 # another include/library directory then you wanted to use, you have
83 # to set CONF_OPT_X below. You might also check the installation of
85 # - If you have --enable-gui=motif and have Motif on your system, but
86 # configure reports "checking for location of gui... <not found>", you
87 # have to set GUI_INC_LOC and GUI_LIB_LOC below.
88 # If you changed something, do this to run configure again:
91 # - If you do not trust the automatic configuration code, then inspect
92 # auto/config.h and auto/config.mk, before starting the actual build
93 # phase. If possible edit this Makefile, rather than auto/config.mk --
94 # especially look at the definition of VIMLOC below. Note that the
95 # configure phase overwrites auto/config.mk and auto/config.h again.
96 # - If you get error messages, find out what is wrong and try to correct
97 # it in this Makefile. You may need to do "make reconfig" when you
98 # change anything that configure uses (e.g. switching from an old C
99 # compiler to an ANSI C compiler). Only when auto/configure does
100 # something wrong you may need to change one of the other files. If
101 # you find a clean way to fix the problem, consider sending a note to
102 # the author of autoconf (bug-gnu-utils@prep.ai.mit.edu) or Vim
103 # (Bram@vim.org). Don't bother to do that when you made a hack
104 # solution for a non-standard system.
106 # 4. "make test" {{{1
107 # This is optional. This will run Vim scripts on a number of test
108 # files, and compare the produced output with the expected output.
109 # If all is well, you will get the "ALL DONE" message in the end. If a
110 # test fails you get "TEST FAILURE". See below (search for "/^test").
112 # 5. "make install" {{{1
113 # If the new Vim seems to be working OK you can install it and the
114 # documentation in the appropriate location. The default is
115 # "/usr/local". Change "prefix" below to change the location.
116 # "auto/pathdef.c" will be compiled again after changing this to make
117 # the executable know where the help files are located.
118 # Note that any existing executable is removed or overwritten. If you
119 # want to keep it you will have to make a backup copy first.
120 # The runtime files are in a different directory for each version. You
121 # might want to delete an older version.
122 # If you don't want to install everything, there are other targets:
123 # make installvim only installs Vim, not the tools
124 # make installvimbin only installs the Vim executable
125 # make installruntime installs most of the runtime files
126 # make installrtbase only installs the Vim help and
128 # make installlinks only installs the Vim binary links
129 # make installmanlinks only installs the Vim manpage links
130 # make installmacros only installs the Vim macros
131 # make installtutorbin only installs the Vim tutor program
132 # make installtutor only installs the Vim tutor files
133 # make installspell only installs the spell files
134 # make installtools only installs xxd
135 # If you install Vim, not to install for real but to prepare a package
136 # or RPM, set DESTDIR to the root of the tree.
138 # 6. Use Vim until a new version comes out. {{{1
140 # 7. "make uninstall_runtime" {{{1
141 # Will remove the runtime files for the current version. This is safe
142 # to use while another version is being used, only version-specific
143 # files will be deleted.
144 # To remove the runtime files of another version:
145 # make uninstall_runtime VIMRTDIR=/vim54
146 # If you want to delete all installed files, use:
148 # Note that this will delete files that have the same name for any
149 # version, thus you might need to do a "make install" soon after this.
150 # Be careful not to remove a version of Vim that is still being used!
151 # To find out which files and directories will be deleted, use:
155 ### This Makefile has been successfully tested on many systems. {{{
156 ### Only the ones that require special options are mentioned here.
157 ### Check the (*) column for remarks, listed below.
158 ### Later code changes may cause small problems, otherwise Vim is supposed to
159 ### compile and run without problems.
161 #system: configurations: version (*) tested by:
162 #------------- ------------------------ ------- - ----------
163 #AIX 3.2.5 cc (not gcc) - 4.5 (M) Will Fiveash
164 #AIX 4 cc +X11 -GUI 3.27 (4) Axel Kielhorn
165 #AIX 4.1.4 cc +X11 +GUI 4.5 (5) Nico Bakker
166 #AIX 4.2.1 cc 5.2k (C) Will Fiveash
167 #AIX 4.3.3.12 xic 3.6.6 5.6 (5) David R. Favor
168 #A/UX 3.1.1 gcc +X11 4.0 (6) Jim Jagielski
169 #BeOS PR mwcc DR3 5.0n (T) Olaf Seibert
170 #BSDI 2.1 (x86) shlicc2 gcc-2.6.3 -X11 X11R6 4.5 (1) Jos Backus
171 #BSD/OS 3.0 (x86) gcc gcc-2.7.2.1 -X11 X11R6 4.6c (1) Jos Backus
172 #CX/UX 6.2 cc +X11 +GUI_Mofif 5.4 (V) Kipp E. Howard
173 #DG/UX 5.4* gcc 2.5.8 GUI 5.0e (H) Jonas Schlein
174 #DG/UX 5.4R4.20 gcc 2.7.2 GUI 5.0s (H) Rocky Olive
175 #HP-UX (most) c89 cc 5.1 (2) Bram Moolenaar
176 #HP-UX_9.04 cc +X11 +Motif 5.0 (2) Carton Lao
177 #Irix 6.3 (O2) cc ? 4.5 (L) Edouard Poor
178 #Irix 6.4 cc ? 5.0m (S) Rick Sayre
179 #Irix 6.5 cc ? 6.0 (S) David Harrison
180 #Irix 64 bit 4.5 (K) Jon Wright
181 #Linux 2.0 gcc-2.7.2 Infomagic Motif 4.3 (3) Ronald Rietman
182 #Linux 2.0.31 gcc +X11 +GUI Athena 5.0w (U) Darren Hiebert
183 #LynxOS 3.0.1 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn
184 #LynxOS 3.1.0 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn
185 #NEC UP4800 UNIX_SV 4.2MP cc +X11R6 Motif,Athena4.6b (Q) Lennart Schultz
186 #NetBSD 1.0A gcc-2.4.5 -X11 -GUI 3.21 (X) Juergen Weigert
187 #QNX 4.2 wcc386-10.6 -X11 4.2 (D) G.F. Desrochers
188 #QNX 4.23 Watcom -X11 4.2 (F) John Oleynick
189 #SCO Unix v3.2.5 cc +X11 Motif 3.27 (C) M. Kuperblum
190 #SCO Open Server 5 gcc 2.7.2.3 +X11 +GUI Motif 5.3 (A) Glauber Ribeiro
191 #SINIX-N 5.43 RM400 R4000 cc +X11 +GUI 5.0l (I) Martin Furter
192 #SINIX-Z 5.42 i386 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn
193 #SINIX-Y 5.43 RM600 R4000 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn
194 #Reliant/SINIX 5.44 cc +X11 +GUI 5.5a (I) B. Pruemmer
195 #SNI Targon31 TOS 4.1.11 gcc-2.4.5 +X11 -GUI 4.6c (B) Paul Slootman
196 #Solaris 2.4 (Sparc) cc +X11 +GUI 3.29 (9) Glauber
197 #Solaris 2.4/2.5 clcc +X11 -GUI openwin 3.20 (7) Robert Colon
198 #Solaris 2.5 (sun4m) cc (SC4.0) +X11R6 +GUI (CDE) 4.6b (E) Andrew Large
199 #Solaris 2.5 cc +X11 +GUI Athena 4.2 (9) Sonia Heimann
200 #Solaris 2.5 gcc 2.5.6 +X11 Motif 5.0m (R) Ant. Colombo
201 #Solaris 2.6 gcc 2.8.1 ncursus 5.3 (G) Larry W. Virden
202 #Solaris with -lthread 5.5 (W) K. Nagano
203 #Solaris gcc (b) Riccardo
204 #SunOS 4.1.x +X11 -GUI 5.1b (J) Bram Moolenaar
205 #SunOS 4.1.3_U1 (sun4c) gcc +X11 +GUI Athena 5.0w (J) Darren Hiebert
206 #SUPER-UX 6.2 (NEC SX-4) cc +X11R6 Motif,Athena4.6b (P) Lennart Schultz
207 #Tandem/NSK (c) Matthew Woehlke
208 #Unisys 6035 cc +X11 Motif 5.3 (8) Glauber Ribeiro
209 #ESIX V4.2 cc +X11 6.0 (a) Reinhard Wobst
210 #Mac OS X 10.[23] gcc Carbon 6.2 (x) Bram Moolenaar
215 # (1) Uncomment line below for shlicc2
216 # (2) HPUX with compile problems or wrong digraphs, uncomment line below
217 # (3) Infomagic Motif needs GUI_LIB_LOC and GUI_INC_LOC set, see below.
218 # And add "-lXpm" to MOTIF_LIBS2.
219 # (4) For cc the optimizer must be disabled (use CFLAGS= after running
220 # configure) (symptom: ":set termcap" output looks weird).
221 # (5) Compiler may need extra argument, see below.
222 # (6) See below for a few lines to uncomment
223 # (7) See below for lines which enable the use of clcc
224 # (8) Needs some EXTRA_LIBS, search for Unisys below
225 # (9) Needs an extra compiler flag to compile gui_at_sb.c, see below.
226 # (A) May need EXTRA_LIBS, see below
227 # (B) Can't compile GUI because there is no waitpid()... Disable GUI below.
228 # (C) Force the use of curses instead of termcap, see below.
229 # (D) Uncomment lines below for QNX
230 # (E) You might want to use termlib instead of termcap, see below.
231 # (F) See below for instructions.
232 # (G) Using ncursus version 4.2 has reported to cause a crash. Use the
233 # Sun cursus library instead.
234 # (H) See line for EXTRA_LIBS below.
235 # (I) SINIX-N 5.42 and 5.43 need some EXTRA_LIBS. Also for Reliant-Unix.
236 # (J) If you get undefined symbols, see below for a solution.
237 # (K) See lines to uncomment below for machines with 64 bit pointers.
238 # (L) For Silicon Graphics O2 workstations remove "-lnsl" from auto/config.mk
239 # (M) gcc version cygnus-2.0.1 does NOT work (symptom: "dl" deletes two
240 # characters instead of one).
241 # (N) SCO with decmouse.
242 # (O) LynxOS needs EXTRA_LIBS, see below.
243 # (P) For SuperUX 6.2 on NEC SX-4 see a few lines below to uncomment.
244 # (Q) For UNIXSVR 4.2MP on NEC UP4800 see below for lines to uncomment.
245 # (R) For Solaris 2.5 (or 2.5.1) with gcc > 2.5.6, uncomment line below.
246 # (S) For Irix 6.x with MipsPro compiler, use -OPT:Olimit. See line below.
247 # (T) See ../doc/os_beos.txt.
248 # (U) Must uncomment CONF_OPT_PYTHON option below to disable Python
249 # detection, since the configure script runs into an error when it
250 # detects Python (probably because of the bash shell).
251 # (V) See lines to uncomment below.
252 # (X) Need to use the .include "auto/config.mk" line below
253 # (Y) See line with c89 below
254 # (Z) See lines with cc or c89 below
255 # (a) See line with EXTRA_LIBS below.
256 # (b) When using gcc with the Solaris linker, make sure you don't use GNU
257 # strip, otherwise the binary may not run: "Cannot find ELF".
258 # (c) Add -lfloss to EXTRA_LIBS, see below.
259 # (x) When you get warnings for precompiled header files, run
260 # "sudo fixPrecomps". Also see CONF_OPT_DARWIN below.
264 #DO NOT CHANGE the next line, we need it for configure to find the compiler
265 #instead of using the default from the "make" program.
266 #Use a line further down to change the value for CC.
269 # Change and use these defines if configure cannot find your Motif stuff.
270 # Unfortunately there is no "standard" location for Motif. {{{
271 # These defines can contain a single directory (recommended) or a list of
272 # directories (for when you are working with several systems). The LAST
273 # directory that exists is used.
274 # When changed, run "make reconfig" next!
275 #GUI_INC_LOC = -I/usr/include/Motif2.0 -I/usr/include/Motif1.2
276 #GUI_LIB_LOC = -L/usr/lib/Motif2.0 -L/usr/lib/Motif1.2
277 ### Use these two lines for Infomagic Motif (3)
278 #GUI_INC_LOC = -I/usr/X11R6/include
279 #GUI_LIB_LOC = -L/usr/X11R6/lib
282 ######################## auto/config.mk ######################## {{{1
283 # At this position auto/config.mk is included. When starting from the
284 # distribution it is almost empty. After running auto/configure it contains
285 # settings that have been discovered for your system. Settings below this
286 # include override settings in auto/config.mk!
288 # Note: if auto/config.mk is lost somehow (e.g., because configure was
289 # interrupted), create an empty auto/config.mk file and do "make config".
291 # (X) How to include auto/config.mk depends on the version of "make" you have,
292 # if the current choice doesn't work, try the other one.
294 include auto
/config.mk
295 #.include "auto/config.mk"
300 # Include the configuration choices first, so we can override everything
301 # below. As shipped, this file contains a target that causes to run
302 # configure. Once configure was run, this file contains a list of
303 # make variables with predefined values instead. Thus any second invocation
304 # of make, will build Vim.
306 # CONFIGURE - configure arguments {{{1
307 # You can give a lot of options to configure.
308 # Change this to your desire and do 'make config' afterwards
310 # examples (can only use one!):
311 #CONF_ARGS = --exec-prefix=/usr
312 #CONF_ARGS = --with-vim-name=vim7 --with-ex-name=ex7 --with-view-name=view7
313 #CONF_ARGS = --with-global-runtime=/etc/vim
314 #CONF_ARGS = --with-local-dir=/usr/share
315 #CONF_ARGS = --without-local-dir
317 # Use this one if you distribute a modified version of Vim.
318 CONF_ARGS
= --with-modified-by
="Vim extended"
320 # GUI - For creating Vim with GUI (gvim) (B)
321 # Uncomment this line when you don't want to get the GUI version, although you
322 # have GTK, Motif and/or Athena. Also use --without-x if you don't want X11
324 #CONF_OPT_GUI = --disable-gui
326 # Uncomment one of these lines if you have that GUI but don't want to use it.
327 # The automatic check will use another one that can be found.
328 # Gnome is disabled by default, it may cause trouble.
329 #CONF_OPT_GUI = --disable-gtk-check
330 #CONF_OPT_GUI = --disable-gtk2-check
331 #CONF_OPT_GUI = --enable-gnome-check
332 #CONF_OPT_GUI = --enable-gnome2-check
333 #CONF_OPT_GUI = --disable-motif-check
334 #CONF_OPT_GUI = --disable-athena-check
335 #CONF_OPT_GUI = --disable-nextaw-check
337 # Uncomment one of these lines to select a specific GUI to use.
338 # When using "yes" or nothing, configure will use the first one found: GTK+,
341 # GTK versions that are known not to work 100% are rejected.
342 # Use "--disable-gtktest" to accept them anyway.
344 # GNOME means GTK with Gnome support. If using GTK and --enable-gnome-check
345 # is used then GNOME will automatically be used if it is found. If you have
346 # GNOME, but do not want to use it (e.g., want a GTK-only version), then use
347 # --enable-gui=gtk or leave out --enable-gnome-check.
349 # If the selected GUI isn't found, the GUI is disabled automatically
350 #CONF_OPT_GUI = --enable-gui=gtk
351 #CONF_OPT_GUI = --enable-gui=gtk --disable-gtktest
352 #CONF_OPT_GUI = --enable-gui=gtk2
353 #CONF_OPT_GUI = --enable-gui=gtk2 --disable-gtktest
354 #CONF_OPT_GUI = --enable-gui=gnome
355 #CONF_OPT_GUI = --enable-gui=gnome2
356 #CONF_OPT_GUI = --enable-gui=gnome2 --disable-gtktest
357 #CONF_OPT_GUI = --enable-gui=motif
358 #CONF_OPT_GUI = --enable-gui=motif --with-motif-lib="-static -lXm -shared"
359 #CONF_OPT_GUI = --enable-gui=athena
360 #CONF_OPT_GUI = --enable-gui=nextaw
362 # DARWIN - detecting Mac OS X
363 # Uncomment this line when you want to compile a Unix version of Vim on
364 # Darwin. None of the Mac specific options or files will be used.
365 #CONF_OPT_DARWIN = --disable-darwin
367 # Select the architecture supported. Default is to build for the current
368 # platform. Use "both" for a universal binary. That probably doesn't work
369 # when including Perl, Python, etc.
370 #CONF_OPT_DARWIN = --with-mac-arch=i386
371 #CONF_OPT_DARWIN = --with-mac-arch=ppc
372 #CONF_OPT_DARWIN = --with-mac-arch=both
375 # Uncomment this when you want to include the Perl interface.
376 # The Perl option sometimes causes problems, because it adds extra flags
377 # to the command line. If you see strange flags during compilation, check in
378 # auto/config.mk where they come from. If it's PERL_CFLAGS, try commenting
380 # When you get an error for a missing "perl.exp" file, try creating an emtpy
381 # one: "touch perl.exp".
382 # This requires at least "small" features, "tiny" doesn't work.
383 #CONF_OPT_PERL = --enable-perlinterp
385 # ECL - For creating Vim with ECL interface
386 # Uncomment this when you want to include the ECL interface.
387 CONF_OPT_ECL
= --enable-eclinterp
390 # Uncomment this when you want to include the Python interface.
391 # NOTE: This may cause threading to be enabled, which has side effects (such
392 # as using different libraries and debugging becomes more difficult).
393 # NOTE: Using this together with Perl may cause a crash in initialization.
394 #CONF_OPT_PYTHON = --enable-pythoninterp
397 # Uncomment this when you want to include the Tcl interface.
398 #CONF_OPT_TCL = --enable-tclinterp
399 #CONF_OPT_TCL = --enable-tclinterp --with-tclsh=tclsh8.4
402 # Uncomment this when you want to include the Ruby interface.
403 # Note: you need the development package (e.g., ruby1.9.1-dev on Ubuntu).
404 # CONF_OPT_RUBY = --enable-rubyinterp
405 # CONF_OPT_RUBY = --enable-rubyinterp --with-ruby-command=ruby1.9.1
408 # Uncomment this when you want to include the Lua interface.
409 CONF_OPT_LUA
= --enable-luainterp
410 # Lua installation dir (also in LUA_PREFIX environment variable)
411 #CONF_OPT_LUA_PREFIX = --with-lua-prefix=/usr/local
412 #CONF_OPT_LUA_PREFIX = --with-lua-prefix=/usr
415 # Uncomment this when you want to include the MzScheme interface.
416 #CONF_OPT_MZSCHEME = --enable-mzschemeinterp
417 # PLT/mrscheme/drscheme Home dir; the PLTHOME environment variable also works
418 #CONF_OPT_PLTHOME = --with-plthome=/usr/local/plt
419 #CONF_OPT_PLTHOME = --with-plthome=/usr/local/drscheme
420 #CONF_OPT_PLTHOME = --with-plthome=/home/me/mz
423 # Uncomment this when you want to include the Cscope interface.
424 #CONF_OPT_CSCOPE = --enable-cscope
426 # WORKSHOP - Sun Visual Workshop interface. Only works with Motif!
427 #CONF_OPT_WORKSHOP = --enable-workshop
429 # NETBEANS - NetBeans interface. Only works with Motif, GTK, and gnome.
430 # Motif version must have XPM libraries (see |workshop-xpm|).
431 # Uncomment this when you do not want the netbeans interface.
432 #CONF_OPT_NETBEANS = --disable-netbeans
434 # SNIFF - Include support for SNiFF+.
435 #CONF_OPT_SNIFF = --enable-sniff
437 # MULTIBYTE - To edit multi-byte characters.
438 # Uncomment this when you want to edit a multibyte language.
439 # It's automatically enabled with big features or IME support.
440 # Note: Compile on a machine where setlocale() actually works, otherwise the
441 # configure tests may fail.
442 #CONF_OPT_MULTIBYTE = --enable-multibyte
444 # NLS - National Language Support
445 # Uncomment this when you do not want to support translated messages, even
446 # though configure can find support for it.
447 #CONF_OPT_NLS = --disable-nls
449 # XIM - X Input Method. Special character input support for X11 (Chinese,
450 # Japanese, special symbols, etc). Also needed for dead-key support.
451 # When omitted it's automatically enabled for the X-windows GUI.
452 # HANGUL - Input Hangul (Korean) language using internal routines.
453 # Uncomment one of these when you want to input a multibyte language.
454 #CONF_OPT_INPUT = --enable-xim
455 #CONF_OPT_INPUT = --disable-xim
456 #CONF_OPT_INPUT = --enable-hangulinput
458 # FONTSET - X fontset support for output of languages with many characters.
459 # Uncomment this when you want to output a multibyte language.
460 #CONF_OPT_OUTPUT = --enable-fontset
462 # ACL - Uncomment this when you do not want to include ACL support, even
463 # though your system does support it. E.g., when it's buggy.
464 #CONF_OPT_ACL = --disable-acl
466 # gpm - For mouse support on Linux console via gpm
467 # Uncomment this when you do not want to include gpm support, even
468 # though you have gpm libraries and includes.
469 #CONF_OPT_GPM = --disable-gpm
471 # sysmouse - For mouse support on FreeBSD and DragonFly console via sysmouse
472 # Uncomment this when you do not want do include sysmouse support, even
473 # though you have /dev/sysmouse and includes.
474 #CONF_OPT_SYSMOUSE = --disable-sysmouse
476 # FEATURES - For creating Vim with more or less features
477 # Uncomment one of these lines when you want to include few to many features.
478 # The default is "normal".
479 #CONF_OPT_FEAT = --with-features=tiny
480 #CONF_OPT_FEAT = --with-features=small
481 #CONF_OPT_FEAT = --with-features=normal
482 #CONF_OPT_FEAT = --with-features=big
483 #CONF_OPT_FEAT = --with-features=huge
485 # COMPILED BY - For including a specific e-mail address for ":version".
486 #CONF_OPT_COMPBY = "--with-compiledby=John Doe <JohnDoe@yahoo.com>"
488 # X WINDOWS DISABLE - For creating a plain Vim without any X11 related fancies
489 # (otherwise Vim configure will try to include xterm titlebar access)
490 # Also disable the GUI above, otherwise it will be included anyway.
491 # When both GUI and X11 have been disabled this may save about 15% of the
492 # code and make Vim startup quicker.
493 #CONF_OPT_X = --without-x
495 # X WINDOWS DIRECTORY - specify X directories
496 # If configure can't find you X stuff, or if you have multiple X11 derivatives
497 # installed, you may wish to specify which one to use.
498 # Select nothing to let configure choose.
499 # This here selects openwin (as found on sun).
500 #XROOT = /usr/openwin
501 #CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib
503 # X11 Session Management Protocol support
504 # Vim will try to use XSMP to catch the user logging out if there are unsaved
505 # files. Uncomment this line to disable that (it prevents vim trying to open
506 # communications with the session manager).
507 #CONF_OPT_XSMP = --disable-xsmp
509 # You may wish to include xsmp but use exclude xsmp-interact if the logout
510 # XSMP functionality does not work well with your session-manager (at time of
511 # writing, this would be early GNOME-1 gnome-session: it 'freezes' other
512 # applications after Vim has cancelled a logout (until Vim quits). This
513 # *might* be the Vim code, but is more likely a bug in early GNOME-1.
514 # This disables the dialog that asks you if you want to save files or not.
515 #CONF_OPT_XSMP = --disable-xsmp-interact
517 # COMPILER - Name of the compiler {{{1
518 # The default from configure will mostly be fine, no need to change this, just
519 # an example. If a compiler is defined here, configure will use it rather than
520 # probing for one. It is dangerous to change this after configure was run.
521 # Make will use your choice then -- but beware: Many things may change with
522 # another compiler. It is wise to run 'make reconfig' to start all over
527 # COMPILER FLAGS - change as you please. Either before running {{{1
528 # configure or afterwards. For examples see below.
529 # When using -g with some older versions of Linux you might get a
530 # statically linked executable.
531 # When not defined, configure will try to use -O2 -g for gcc and -O for cc.
535 # Optimization limits - depends on the compiler. Automatic check in configure
536 # doesn't work very well, because many compilers only give a warning for
537 # unrecognized arguments.
538 #CFLAGS = -O -OPT:Olimit=2600
539 #CFLAGS = -O -Olimit 2000
540 #CFLAGS = -O -FOlimit,2000
542 # Often used for GCC: mixed optimizing, lot of optimizing, debugging
543 #CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes
544 #CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wmissing-prototypes
545 #CFLAGS = -g -Wall -Wmissing-prototypes
546 #CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes
547 #CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes
548 #CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes
550 # Use this with GCC to check for mistakes, unused arguments, etc.
551 #CFLAGS = -g -Wall -Wextra -Wmissing-prototypes -Wunreachable-code
552 #PYTHON_CFLAGS_EXTRA = -Wno-missing-field-initializers
553 #MZSCHEME_CFLAGS_EXTRA = -Wno-unreachable-code -Wno-unused-parameter
555 # EFENCE - Electric-Fence malloc debugging: catches memory accesses beyond
556 # allocated memory (and makes every malloc()/free() very slow).
557 # Electric Fence is free (search ftp sites).
558 # You may want to set the EF_PROTECT_BELOW environment variable to check the
559 # other side of allocated memory.
560 # On FreeBSD you might need to enlarge the number of mmaps allowed. Do this
561 # as root: sysctl -w vm.max_proc_mmap=30000
562 #EXTRA_LIBS = /usr/local/lib/libefence.a
564 # PURIFY - remove the # to use the "purify" program (hoi Nia++!)
567 # NBDEBUG - debugging the netbeans interface.
568 #EXTRA_DEFS = -DNBDEBUG
572 # LINT - for running lint
573 # For standard Unix lint
575 LINT_OPTIONS
= -beprxzF
577 # It doesn't work well, crashes on include files and non-ascii characters.
579 #LINT_OPTIONS = +unixlib -weak -macrovarprefixexclude -showfunc -linelen 9999
581 # PROFILING - Uncomment the next two lines to do profiling with gcc and gprof.
582 # Might not work with GUI or Perl.
583 # For unknown reasons adding "-lc" fixes a linking problem with GCC. That's
584 # probably a bug in the "-pg" implementation.
585 # Need to recompile everything after changing this: "make clean" "make".
586 #PROFILE_CFLAGS = -pg -g -DWE_ARE_PROFILING
588 #PROFILE_LIBS = -pg -lc
590 # MEMORY LEAK DETECTION
591 # Requires installing the ccmalloc library.
592 # Configuration is in the .ccmalloc or ~/.ccmalloc file.
593 # Doesn't work very well, since memory linked to from global variables
594 # (in libraries) is also marked as leaked memory.
595 #PROFILE_CFLAGS = -DEXITFREE
596 #PROFILE_LIBS = -lccmalloc
598 #####################################################
599 ### Specific systems, check if yours is listed! ### {{{
600 #####################################################
602 ### Uncomment things here only if the values chosen by configure are wrong.
603 ### It's better to adjust configure.in and "make autoconf", if you can!
604 ### Then send the required changes to configure.in to the bugs list.
606 ### (1) BSD/OS 2.0.1, 2.1 or 3.0 using shared libraries
609 #CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin
611 ### (2) HP-UX with a non-ANSI cc, use the c89 ANSI compiler
612 ### The first probably works on all systems
613 ### The second should work a bit better on newer systems
614 ### The third should work a bit better on HPUX 11.11
615 ### Information provided by: Richard Allen <ra@rhi.hi.is>
616 #CC = c89 -D_HPUX_SOURCE
617 #CC = c89 -O +Onolimit +ESlit -D_HPUX_SOURCE
618 #CC = c89 -O +Onolimit +ESlit +e -D_HPUX_SOURCE
620 ### (2) For HP-UX: Enable the use of a different set of digraphs. Use this
621 ### when the default (ISO) digraphs look completely wrong.
622 ### After changing this do "touch digraph.c; make".
623 #EXTRA_DEFS = -DHPUX_DIGRAPHS
625 ### (2) For HP-UX: 9.04 cpp default macro definition table of 128000 bytes
626 ### is too small to compile many routines. It produces too much defining
627 ### and no space errors.
628 ### Uncomment the following to specify a larger macro definition table.
629 #CFLAGS = -Wp,-H256000
631 ### (2) For HP-UX 10.20 using the HP cc, with X11R6 and Motif 1.2, with
632 ### libraries in /usr/lib instead of /lib (avoiding transition links).
633 ### Information provided by: David Green
635 #CONF_OPT_X = --x-include=$(XROOT)/include/X11R6 --x-libraries=$(XROOT)/lib/X11R6
636 #GUI_INC_LOC = -I/usr/include/Motif1.2
637 #GUI_LIB_LOC = -L/usr/lib/Motif1.2_R6
639 ### (5) AIX 4.1.4 with cc
640 #CFLAGS = -O -qmaxmem=8192
642 ### AIX with c89 (Walter Briscoe)
644 #CPPFLAGS = -D_ALL_SOURCE
646 ### AIX 4.3.3.12 with xic 3.6.6 (David R. Favor)
647 # needed to avoid a problem where strings.h gets included
648 #CFLAGS = -qsrcmsg -O2 -qmaxmem=8192 -D__STR31__
650 ### (W) Solaris with multi-threaded libraries (-lthread):
651 ### If suspending doesn't work properly, try using this line:
652 #EXTRA_DEFS = -D_REENTRANT
654 ### (7) Solaris 2.4/2.5 with Centerline compiler
656 #X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib
659 ### (9) Solaris 2.x with cc (SunPro), using Athena.
660 ### Only required for compiling gui_at_sb.c.
661 ### Symptom: "identifier redeclared: vim_XawScrollbarSetThumb"
662 ### Use one of the lines (either Full ANSI or no ANSI at all)
663 #CFLAGS = $(CFLAGS) -Xc
664 #CFLAGS = $(CFLAGS) -Xs
666 ### Solaris 2.3 with X11 and specific cc
667 #CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib
669 ### Solaris with /usr/ucb/cc (it is rejected by autoconf as "cc")
671 #EXTRA_LIBS = -R/usr/ucblib
673 ### Solaris with Forte Developer and FEAT_SUN_WORKSHOP
674 # The Xpm library is available from http://koala.ilog.fr/ftp/pub/xpm.
676 #XPM_DIR = /usr/local/xpm/xpm-3.4k-solaris
677 #XPM_LIB = -L$(XPM_DIR)/lib -R$(XPM_DIR)/lib -lXpm
678 #XPM_IPATH = -I$(XPM_DIR)/include
679 #EXTRA_LIBS = $(XPM_LIB)
680 #EXTRA_IPATHS = $(XPM_IPATH)
681 #EXTRA_DEFS = -xCC -DHAVE_X11_XPM_H
683 ### Solaris with workshop compilers: Vim is unstable when compiled with
684 # "-fast". Use this instead. (Shea Martin)
685 #CFLAGS = -x02 -xtarget=ultra
687 ### (R) for Solaris 2.5 (or 2.5.1) with gcc > 2.5.6 you might need this:
688 #LDFLAGS = -lw -ldl -lXmu
689 #GUI_LIB_LOC = -L/usr/local/lib
691 ### (8) Unisys 6035 (Glauber Ribeiro)
692 #EXTRA_LIBS = -lnsl -lsocket -lgen
694 ### When builtin functions cause problems with gcc (for Sun 4.1.x)
695 #CFLAGS = -O2 -Wall -traditional -Wno-implicit
697 ### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0)
698 #EXTRA_DEFS = -DDOMAIN
699 #CFLAGS= -O -A systype,bsd4.3
701 ### Coherent 4.2.10 on Intel 386 platform
702 #EXTRA_DEFS = -Dvoid=int
703 #EXTRA_LIBS = -lterm -lsocket
705 ### SCO 3.2, with different library name for terminfo
706 #EXTRA_LIBS = -ltinfo
708 ### UTS2 for Amdahl UTS 2.1.x
710 #EXTRA_LIBS = -lsocket
712 ### UTS4 for Amdahl UTS 4.x
713 #EXTRA_DEFS = -DUTS4 -Xa
715 ### USL for Unix Systems Laboratories (SYSV 4.2)
718 ### RISCos on MIPS without X11
721 ### RISCos on MIPS with X11
724 ### (6) A/UX 3.1.1 with gcc (Jim Jagielski)
725 #CC= gcc -D_POSIX_SOURCE
727 #EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11
729 ### (A) Some versions of SCO Open Server 5 (Jan Christiaan van Winkel)
730 ### Also use the CONF_TERM_LIB below!
733 ### (D) QNX (by G.F. Desrochers)
734 #CFLAGS = -g -O -mf -4
736 ### (F) QNX (by John Oleynick)
737 # 1. If you don't have an X server: Comment out CONF_OPT_GUI and uncomment
738 # CONF_OPT_X = --without-x.
740 # 3. edit auto/config.mk and remove -ldir and -ltermcap from LIBS. It doesn't
741 # have -ldir (does config find it somewhere?) and -ltermcap has at
742 # least one problem so I use termlib.o instead. The problem with
743 # termcap is that it segfaults if you call it with the name of
744 # a non-existent terminal type.
745 # 4. edit auto/config.h and add #define USE_TMPNAM
746 # 5. add termlib.o to OBJ
749 ### (H) for Data general DG/UX 5.4.2 and 5.4R3.10 (Jonas J. Schlein)
752 ### (I) SINIX-N 5.42 or 5.43 RM400 R4000 (also SINIX-Y and SINIX-Z)
753 #EXTRA_LIBS = -lgen -lnsl
754 ### For SINIX-Y this is needed for the right prototype of gettimeofday()
755 #EXTRA_DEFS = -D_XPG_IV
757 ### (I) Reliant-Unix (aka SINIX) 5.44 with standard cc
758 # Use both "-F O3" lines for optimization or the "-g" line for debugging
759 #EXTRA_LIBS = -lgen -lsocket -lnsl -lSM -lICE
760 #CFLAGS = -F O3 -DSINIXN
762 #CFLAGS = -g -DSINIXN
764 ### (P) SCO 3.2.42, with different termcap names for some useful keys DJB
765 #EXTRA_DEFS = -DSCOKEYS -DNETTERM_MOUSE -DDEC_MOUSE -DXTERM_MOUSE -DHAVE_GETTIMEOFDAY
766 #EXTRA_LIBS = -lsocket -ltermcap -lmalloc -lc_s
768 ### (P) SuperUX 6.2 on NEC SX-4 (Lennart Schultz)
769 #GUI_INC_LOC = -I/usr/include
770 #GUI_LIB_LOC = -L/usr/lib
773 ### (Q) UNIXSVR 4.2MP on NEC UP4800 (Lennart Schultz)
774 #GUI_INC_LOC = -I/usr/necccs/include
775 #GUI_LIB_LOC = -L/usr/necccs/lib/X11R6
777 #CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib/X11R6
778 #EXTRA_LIBS = -lsocket -lgen
780 ### Irix 4.0 & 5.2 (Silicon Graphics Machines, __sgi will be defined)
781 # Not needed for Irix 5.3, Ives Aerts reported
782 #EXTRA_LIBS = -lmalloc -lc_s
783 # Irix 4.0, when regexp and regcmp cannot be found when linking:
784 #EXTRA_LIBS = -lmalloc -lc_s -lPW
786 ### (S) Irix 6.x (MipsPro compiler): Uses different Olimit flag:
787 # Note: This newer option style is used with the MipsPro compilers ONLY if
788 # you are compiling an "n32" or "64" ABI binary (use either a -n32
789 # flag or a -64 flag for CFLAGS). If you explicitly use a -o32 flag,
790 # then the CFLAGS option format will be the typical style (i.e.
792 #CFLAGS = -OPT:Olimit=3000 -O
794 ### (S) Irix 6.5 with MipsPro C compiler. Try this as a test to see new
795 # compiler features! Beware, the optimization is EXTREMELY thorough
796 # and takes quite a long time.
797 # Note: See the note above. Here, the -mips3 option automatically
798 # enables either the "n32" or "64" ABI, depending on what machine you
799 # are compiling on (n32 is explicitly enabled here, just to make sure).
800 #CFLAGS = -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush
801 #LDFLAGS= -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush
803 ### (K) for SGI Irix machines with 64 bit pointers ("uname -s" says IRIX64)
804 ### Suggested by Jon Wright <jon@gate.sinica.edu.tw>.
805 ### Tested on R8000 IRIX6.1 Power Indigo2.
806 ### Check /etc/compiler.defaults for your compiler settings.
807 # either (for 64 bit pointers) uncomment the following line
808 #GUI_LIB_LOC = -L/usr/lib64
811 # 2) edit auto/config.mk and delete the -lelf entry in the LIBS line
814 # or (for 32bit pointers) uncomment the following line
816 #GUI_LIB_LOC = -L/usr/lib32
819 # 2) edit auto/config.mk, add -n32 to LDFLAGS
822 #Alternatively: use -o32 instead of -n32.
825 ### (C) On SCO Unix v3.2.5 (and probably other versions) the termcap library,
826 ### which is found by configure, doesn't work correctly. Symptom is the
827 ### error message "Termcap entry too long". Uncomment the next line.
828 ### On AIX 4.2.1 (and other versions probably), libtermcap is reported
829 ### not to display properly.
830 ### after changing this, you need to do "make reconfig".
831 #CONF_TERM_LIB = --with-tlib=curses
833 ### (E) If you want to use termlib library instead of the automatically found
834 ### one. After changing this, you need to do "make reconfig".
835 #CONF_TERM_LIB = --with-tlib=termlib
837 ### (a) ESIX V4.2 (Reinhard Wobst)
838 #EXTRA_LIBS = -lnsl -lsocket -lgen -lXIM -lXmu -lXext
840 ### (c) Tandem/NSK (Matthew Woehlke)
841 #EXTRA_LIBS = -lfloss
843 ### If you want to use ncurses library instead of the automatically found one
844 ### after changing this, you need to do "make reconfig".
845 #CONF_TERM_LIB = --with-tlib=ncurses
847 ### For GCC on MSDOS, the ".exe" suffix will be added.
851 ### (O) For LynxOS 2.5.0, tested on PC.
852 #EXTRA_LIBS = -lXext -lSM -lICE -lbsd
853 ### For LynxOS 3.0.1, tested on PPC
854 #EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu -liberty -lX11
855 ### For LynxOS 3.1.0, tested on PC
856 #EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu
859 ### (V) For CX/UX 6.2 (on Harris/Concurrent NightHawk 4800, 5800). Remove
860 ### -Qtarget if only in a 5800 environment. (Kipp E. Howard)
861 #CFLAGS = -O -Qtarget=m88110compat
864 ##################### end of system specific lines ################### }}}
866 ### Names of the programs and targets {{{1
867 VIMTARGET
= $(VIMNAME
)$(EXEEXT
)
868 EXTARGET
= $(EXNAME
)$(LNKEXT
)
869 VIEWTARGET
= $(VIEWNAME
)$(LNKEXT
)
870 GVIMNAME
= g
$(VIMNAME
)
871 GVIMTARGET
= $(GVIMNAME
)$(LNKEXT
)
872 GVIEWNAME
= g
$(VIEWNAME
)
873 GVIEWTARGET
= $(GVIEWNAME
)$(LNKEXT
)
874 RVIMNAME
= r
$(VIMNAME
)
875 RVIMTARGET
= $(RVIMNAME
)$(LNKEXT
)
876 RVIEWNAME
= r
$(VIEWNAME
)
877 RVIEWTARGET
= $(RVIEWNAME
)$(LNKEXT
)
878 RGVIMNAME
= r
$(GVIMNAME
)
879 RGVIMTARGET
= $(RGVIMNAME
)$(LNKEXT
)
880 RGVIEWNAME
= r
$(GVIEWNAME
)
881 RGVIEWTARGET
= $(RGVIEWNAME
)$(LNKEXT
)
882 VIMDIFFNAME
= $(VIMNAME
)diff
883 GVIMDIFFNAME
= g
$(VIMDIFFNAME
)
884 VIMDIFFTARGET
= $(VIMDIFFNAME
)$(LNKEXT
)
885 GVIMDIFFTARGET
= $(GVIMDIFFNAME
)$(LNKEXT
)
886 EVIMNAME
= e
$(VIMNAME
)
887 EVIMTARGET
= $(EVIMNAME
)$(LNKEXT
)
888 EVIEWNAME
= e
$(VIEWNAME
)
889 EVIEWTARGET
= $(EVIEWNAME
)$(LNKEXT
)
891 ### Names of the tools that are also made {{{1
892 TOOLS
= xxd
/xxd
$(EXEEXT
)
894 ### Installation directories. The defaults come from configure. {{{1
896 ### prefix the top directory for the data (default "/usr/local")
898 # Uncomment the next line to install Vim in your home directory.
901 ### exec_prefix is the top directory for the executable (default $(prefix))
903 # Uncomment the next line to install the Vim executable in "/usr/machine/bin"
904 #exec_prefix = /usr/machine
906 ### BINDIR dir for the executable (default "$(exec_prefix)/bin")
907 ### MANDIR dir for the manual pages (default "$(prefix)/man")
908 ### DATADIR dir for the other files (default "$(prefix)/lib" or
910 # They may be different when using different architectures for the
911 # executable and a common directory for the other files.
913 # Uncomment the next line to install Vim in "/usr/bin"
915 # Uncomment the next line to install Vim manuals in "/usr/share/man/man1"
916 #MANDIR = /usr/share/man
917 # Uncomment the next line to install Vim help files in "/usr/share/vim"
918 #DATADIR = /usr/share
920 ### DESTDIR root of the installation tree. This is prepended to the other
921 # directories. This directory must exist.
924 ### Directory of the man pages
927 ### Vim version (adjusted by a script)
931 ### Location of Vim files (should not need to be changed, and {{{1
932 ### some things might not work when they are changed!)
934 VIMRTDIR
= /vim
$(VIMMAJOR
)$(VIMMINOR
)
939 AUTOSUBDIR
= /autoload
941 FTPLUGSUBDIR
= /ftplugin
943 COMPSUBDIR
= /compiler
945 MACROSUBDIR
= /macros
952 ### VIMLOC common root of the Vim files (all versions)
953 ### VIMRTLOC common root of the runtime Vim files (this version)
954 ### VIMRCLOC compiled-in location for global [g]vimrc files (all versions)
955 ### VIMRUNTIMEDIR compiled-in location for runtime files (optional)
956 ### HELPSUBLOC location for help files
957 ### COLSUBLOC location for colorscheme files
958 ### SYNSUBLOC location for syntax files
959 ### INDSUBLOC location for indent files
960 ### AUTOSUBLOC location for standard autoload files
961 ### PLUGSUBLOC location for standard plugin files
962 ### FTPLUGSUBLOC location for ftplugin files
963 ### LANGSUBLOC location for language files
964 ### COMPSUBLOC location for compiler files
965 ### KMAPSUBLOC location for keymap files
966 ### MACROSUBLOC location for macro files
967 ### TOOLSSUBLOC location for tools files
968 ### TUTORSUBLOC location for tutor files
969 ### SPELLSUBLOC location for spell files
970 ### PRINTSUBLOC location for PostScript files (prolog, latin1, ..)
971 ### SCRIPTLOC location for script files (menu.vim, bugreport.vim, ..)
972 ### You can override these if you want to install them somewhere else.
973 ### Edit feature.h for compile-time settings.
974 VIMLOC
= $(DATADIR
)$(VIMDIR
)
975 VIMRTLOC
= $(DATADIR
)$(VIMDIR
)$(VIMRTDIR
)
977 HELPSUBLOC
= $(VIMRTLOC
)$(HELPSUBDIR
)
978 COLSUBLOC
= $(VIMRTLOC
)$(COLSUBDIR
)
979 SYNSUBLOC
= $(VIMRTLOC
)$(SYNSUBDIR
)
980 INDSUBLOC
= $(VIMRTLOC
)$(INDSUBDIR
)
981 AUTOSUBLOC
= $(VIMRTLOC
)$(AUTOSUBDIR
)
982 PLUGSUBLOC
= $(VIMRTLOC
)$(PLUGSUBDIR
)
983 FTPLUGSUBLOC
= $(VIMRTLOC
)$(FTPLUGSUBDIR
)
984 LANGSUBLOC
= $(VIMRTLOC
)$(LANGSUBDIR
)
985 COMPSUBLOC
= $(VIMRTLOC
)$(COMPSUBDIR
)
986 KMAPSUBLOC
= $(VIMRTLOC
)$(KMAPSUBDIR
)
987 MACROSUBLOC
= $(VIMRTLOC
)$(MACROSUBDIR
)
988 TOOLSSUBLOC
= $(VIMRTLOC
)$(TOOLSSUBDIR
)
989 TUTORSUBLOC
= $(VIMRTLOC
)$(TUTORSUBDIR
)
990 SPELLSUBLOC
= $(VIMRTLOC
)$(SPELLSUBDIR
)
991 PRINTSUBLOC
= $(VIMRTLOC
)$(PRINTSUBDIR
)
992 SCRIPTLOC
= $(VIMRTLOC
)
994 ### Only set VIMRUNTIMEDIR when VIMRTLOC is set to a different location and
995 ### the runtime directory is not below it.
996 #VIMRUNTIMEDIR = $(VIMRTLOC)
998 ### Name of the evim file target.
999 EVIM_FILE
= $(DESTDIR
)$(SCRIPTLOC
)/evim.vim
1000 MSWIN_FILE
= $(DESTDIR
)$(SCRIPTLOC
)/mswin.vim
1002 ### Name of the menu file target.
1003 SYS_MENU_FILE
= $(DESTDIR
)$(SCRIPTLOC
)/menu.vim
1004 SYS_SYNMENU_FILE
= $(DESTDIR
)$(SCRIPTLOC
)/synmenu.vim
1005 SYS_DELMENU_FILE
= $(DESTDIR
)$(SCRIPTLOC
)/delmenu.vim
1007 ### Name of the bugreport file target.
1008 SYS_BUGR_FILE
= $(DESTDIR
)$(SCRIPTLOC
)/bugreport.vim
1010 ### Name of the file type detection file target.
1011 SYS_FILETYPE_FILE
= $(DESTDIR
)$(SCRIPTLOC
)/filetype.vim
1013 ### Name of the file type detection file target.
1014 SYS_FTOFF_FILE
= $(DESTDIR
)$(SCRIPTLOC
)/ftoff.vim
1016 ### Name of the file type detection script file target.
1017 SYS_SCRIPTS_FILE
= $(DESTDIR
)$(SCRIPTLOC
)/scripts.vim
1019 ### Name of the ftplugin-on file target.
1020 SYS_FTPLUGIN_FILE
= $(DESTDIR
)$(SCRIPTLOC
)/ftplugin.vim
1022 ### Name of the ftplugin-off file target.
1023 SYS_FTPLUGOF_FILE
= $(DESTDIR
)$(SCRIPTLOC
)/ftplugof.vim
1025 ### Name of the indent-on file target.
1026 SYS_INDENT_FILE
= $(DESTDIR
)$(SCRIPTLOC
)/indent.vim
1028 ### Name of the indent-off file target.
1029 SYS_INDOFF_FILE
= $(DESTDIR
)$(SCRIPTLOC
)/indoff.vim
1031 ### Name of the option window script file target.
1032 SYS_OPTWIN_FILE
= $(DESTDIR
)$(SCRIPTLOC
)/optwin.vim
1034 ### Name of the ecl lisp file.
1035 SYS_IF_ECL_FILE
= $(DESTDIR
)$(SCRIPTLOC
)/if_ecl.lisp
1037 ### Name of the ecl vim file.
1038 SYS_IF_ECL_VIM_FILE
= $(DESTDIR
)$(SCRIPTLOC
)/if_ecl.vim
1040 # Program to install the program in the target directory. Could also be "mv".
1043 # Program to install the data in the target directory. Cannot be "mv"!
1045 INSTALL_DATA_R
= cp
-r
1047 ### Program to run on installed binary
1050 ### Permissions for binaries {{{1
1053 ### Permissions for man page
1056 ### Permissions for help files
1059 ### Permissions for Perl and shell scripts
1062 ### Permission for Vim script files (menu.vim, bugreport.vim, ..)
1065 ### Permissions for all directories that are created
1068 ### Permissions for all other files that are created
1071 # Where to copy the man and help files from
1072 HELPSOURCE
= ..
/runtime
/doc
1074 # Where to copy the script files from (menu, bugreport)
1075 SCRIPTSOURCE
= ..
/runtime
1077 # Where to copy the colorscheme files from
1078 COLSOURCE
= ..
/runtime
/colors
1080 # Where to copy the syntax files from
1081 SYNSOURCE
= ..
/runtime
/syntax
1083 # Where to copy the indent files from
1084 INDSOURCE
= ..
/runtime
/indent
1086 # Where to copy the standard plugin files from
1087 AUTOSOURCE
= ..
/runtime
/autoload
1089 # Where to copy the standard plugin files from
1090 PLUGSOURCE
= ..
/runtime
/plugin
1092 # Where to copy the ftplugin files from
1093 FTPLUGSOURCE
= ..
/runtime
/ftplugin
1095 # Where to copy the macro files from
1096 MACROSOURCE
= ..
/runtime
/macros
1098 # Where to copy the tools files from
1099 TOOLSSOURCE
= ..
/runtime
/tools
1101 # Where to copy the tutor files from
1102 TUTORSOURCE
= ..
/runtime
/tutor
1104 # Where to copy the spell files from
1105 SPELLSOURCE
= ..
/runtime
/spell
1107 # Where to look for language specific files
1108 LANGSOURCE
= ..
/runtime
/lang
1110 # Where to look for compiler files
1111 COMPSOURCE
= ..
/runtime
/compiler
1113 # Where to look for keymap files
1114 KMAPSOURCE
= ..
/runtime
/keymap
1116 # Where to look for print resource files
1117 PRINTSOURCE
= ..
/runtime
/print
1119 # If you are using Linux, you might want to use this to make vim the
1120 # default vi editor, it will create a link from vi to Vim when doing
1121 # "make install". An existing file will be overwritten!
1122 # When not using it, some make programs can't handle an undefined $(LINKIT).
1123 #LINKIT = ln -f -s $(DEST_BIN)/$(VIMTARGET) $(DESTDIR)/usr/bin/vi
1124 LINKIT
= @echo
>/dev
/null
1127 ### GRAPHICAL USER INTERFACE (GUI). {{{1
1128 ### 'configure --enable-gui' can enable one of these for you if you did set
1129 ### a corresponding CONF_OPT_GUI above and have X11.
1130 ### Override configures choice by uncommenting all the following lines.
1131 ### As they are, the GUI is disabled. Replace "NONE" with "ATHENA" or "MOTIF"
1132 ### for enabling the Athena or Motif GUI.
1133 #GUI_SRC = $(NONE_SRC)
1134 #GUI_OBJ = $(NONE_OBJ)
1135 #GUI_DEFS = $(NONE_DEFS)
1136 #GUI_IPATH = $(NONE_IPATH)
1137 #GUI_LIBS_DIR = $(NONE_LIBS_DIR)
1138 #GUI_LIBS1 = $(NONE_LIBS1)
1139 #GUI_LIBS2 = $(NONE_LIBS2)
1140 #GUI_INSTALL = $(NONE_INSTALL)
1141 #GUI_TARGETS = $(NONE_TARGETS)
1142 #GUI_MAN_TARGETS= $(NONE_MAN_TARGETS)
1143 #GUI_TESTTARGET = $(NONE_TESTTARGET)
1144 #GUI_BUNDLE = $(NONE_BUNDLE)
1146 # Without a GUI install the normal way.
1147 NONE_INSTALL
= install_normal
1150 GTK_SRC
= gui.c gui_gtk.c gui_gtk_x11.c pty.c gui_gtk_f.c \
1152 GTK_OBJ
= objects
/gui.o objects
/gui_gtk.o objects
/gui_gtk_x11.o \
1153 objects
/pty.o objects
/gui_gtk_f.o \
1155 GTK_DEFS
= -DFEAT_GUI_GTK
$(NARROW_PROTO
)
1156 GTK_IPATH
= $(GUI_INC_LOC
)
1157 GTK_LIBS_DIR
= $(GUI_LIB_LOC
)
1159 GTK_LIBS2
= $(GTK_LIBNAME
)
1160 GTK_INSTALL
= install_normal install_gui_extra
1161 GTK_TARGETS
= installglinks
1162 GTK_MAN_TARGETS
= yes
1163 GTK_TESTTARGET
= gui
1167 MOTIF_SRC
= gui.c gui_motif.c gui_x11.c pty.c gui_beval.c \
1168 gui_xmdlg.c gui_xmebw.c
1169 MOTIF_OBJ
= objects
/gui.o objects
/gui_motif.o objects
/gui_x11.o \
1170 objects
/pty.o objects
/gui_beval.o \
1171 objects
/gui_xmdlg.o objects
/gui_xmebw.o
1172 MOTIF_DEFS
= -DFEAT_GUI_MOTIF
$(NARROW_PROTO
)
1173 MOTIF_IPATH
= $(GUI_INC_LOC
)
1174 MOTIF_LIBS_DIR
= $(GUI_LIB_LOC
)
1176 MOTIF_LIBS2
= $(MOTIF_LIBNAME
) -lXt
1177 MOTIF_INSTALL
= install_normal install_gui_extra
1178 MOTIF_TARGETS
= installglinks
1179 MOTIF_MAN_TARGETS
= yes
1180 MOTIF_TESTTARGET
= gui
1184 ### Use Xaw3d to make the menus look a little bit nicer
1188 ### When using Xaw3d, uncomment/comment the following lines to also get the
1189 ### scrollbars from Xaw3d.
1190 #ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c
1191 #ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \
1192 # objects/pty.o objects/gui_beval.o objects/gui_at_fs.o
1193 #ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) \
1194 # -Dvim_scrollbarWidgetClass=scrollbarWidgetClass \
1195 # -Dvim_XawScrollbarSetThumb=XawScrollbarSetThumb
1196 ATHENA_SRC
= gui.c gui_athena.c gui_x11.c pty.c gui_beval.c \
1197 gui_at_sb.c gui_at_fs.c
1198 ATHENA_OBJ
= objects
/gui.o objects
/gui_athena.o objects
/gui_x11.o \
1199 objects
/pty.o objects
/gui_beval.o \
1200 objects
/gui_at_sb.o objects
/gui_at_fs.o
1201 ATHENA_DEFS
= -DFEAT_GUI_ATHENA
$(NARROW_PROTO
)
1203 ATHENA_IPATH
= $(GUI_INC_LOC
)
1204 ATHENA_LIBS_DIR
= $(GUI_LIB_LOC
)
1205 ATHENA_LIBS1
= $(XAW_LIB
)
1207 ATHENA_INSTALL
= install_normal install_gui_extra
1208 ATHENA_TARGETS
= installglinks
1209 ATHENA_MAN_TARGETS
= yes
1210 ATHENA_TESTTARGET
= gui
1214 NEXTAW_LIB
= -lneXtaw
1216 NEXTAW_SRC
= gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c
1217 NEXTAW_OBJ
= objects
/gui.o objects
/gui_athena.o objects
/gui_x11.o \
1218 objects
/pty.o objects
/gui_beval.o objects
/gui_at_fs.o
1219 NEXTAW_DEFS
= -DFEAT_GUI_ATHENA
-DFEAT_GUI_NEXTAW
$(NARROW_PROTO
)
1221 NEXTAW_IPATH
= $(GUI_INC_LOC
)
1222 NEXTAW_LIBS_DIR
= $(GUI_LIB_LOC
)
1223 NEXTAW_LIBS1
= $(NEXTAW_LIB
)
1225 NEXTAW_INSTALL
= install_normal install_gui_extra
1226 NEXTAW_TARGETS
= installglinks
1227 NEXTAW_MAN_TARGETS
= yes
1228 NEXTAW_TESTTARGET
= gui
1231 ### (J) Sun OpenWindows 3.2 (SunOS 4.1.x) or earlier that produce these ld
1232 # errors: ld: Undefined symbol
1233 # _get_wmShellWidgetClass
1234 # _get_applicationShellWidgetClass
1235 # then you need to get patches 100512-02 and 100573-03 from Sun. In the
1236 # meantime, uncomment the following GUI_X_LIBS definition as a workaround:
1237 #GUI_X_LIBS = -Bstatic -lXmu -Bdynamic -lXext
1238 # If you also get cos, sin etc. as undefined symbols, try uncommenting this
1240 #EXTRA_LIBS = /usr/openwin/lib/libXmu.sa -lm
1243 PHOTONGUI_SRC
= gui.c gui_photon.c pty.c
1244 PHOTONGUI_OBJ
= objects
/gui.o objects
/gui_photon.o objects
/pty.o
1245 PHOTONGUI_DEFS
= -DFEAT_GUI_PHOTON
1247 PHOTONGUI_LIBS_DIR
=
1248 PHOTONGUI_LIBS1
= -lph
-lphexlib
1250 PHOTONGUI_INSTALL
= install_normal install_gui_extra
1251 PHOTONGUI_TARGETS
= installglinks
1252 PHOTONGUI_MAN_TARGETS
= yes
1253 PHOTONGUI_TESTTARGET
= gui
1257 CARBONGUI_SRC
= gui.c gui_mac.c
1258 CARBONGUI_OBJ
= objects
/gui.o objects
/gui_mac.o objects
/pty.o
1259 CARBONGUI_DEFS
= -DFEAT_GUI_MAC
-fno-common
-fpascal-strings \
1260 -Wall
-Wno-unknown-pragmas \
1261 -mdynamic-no-pic
-pipe
1262 CARBONGUI_IPATH
= -I.
-Iproto
1263 CARBONGUI_LIBS_DIR
=
1264 CARBONGUI_LIBS1
= -framework Carbon
1266 CARBONGUI_INSTALL
= install_macosx
1268 CARBONGUI_MAN_TARGETS
=
1269 CARBONGUI_TESTTARGET
= gui
1270 CARBONGUI_BUNDLE
= gui_bundle
1271 APPDIR
= $(VIMNAME
).app
1272 CARBONGUI_TESTARG
= VIMPROG
=..
/$(APPDIR
)/Contents
/MacOS
/$(VIMTARGET
)
1275 ALL_GUI_SRC
= gui.c gui_gtk.c gui_gtk_f.c gui_motif.c gui_xmdlg.c gui_xmebw.c gui_athena.c gui_gtk_x11.c gui_x11.c gui_at_sb.c gui_at_fs.c pty.c
1276 ALL_GUI_PRO
= gui.pro gui_gtk.pro gui_motif.pro gui_xmdlg.pro gui_athena.pro gui_gtk_x11.pro gui_x11.pro gui_w16.pro gui_w32.pro gui_photon.pro
1280 ### Command to create dependencies based on #include "..."
1281 ### prototype headers are ignored due to -DPROTO, system
1282 ### headers #include <...> are ignored if we use the -MM option, as
1283 ### e.g. provided by gcc-cpp.
1284 ### Include FEAT_GUI to get gependency on gui.h
1285 ### Need to change "-I /<path>" to "-isystem /<path>" for GCC 3.x.
1286 CPP_DEPEND
= $(CC
) -I
$(srcdir) -M
$(CPP_MM
) \
1287 `echo "$(DEPEND_CFLAGS)" $(DEPEND_CFLAGS_FILTER)`
1290 # This is for cproto 3 patchlevel 8 or below
1291 # __inline, __attribute__ and __extension__ are not recognized by cproto
1292 # G_IMPLEMENT_INLINES is to avoid functions defined in glib/gutils.h.
1293 #NO_ATTR = -D__inline= -D__inline__= -DG_IMPLEMENT_INLINES \
1294 # -D"__attribute__\\(x\\)=" -D"__asm__\\(x\\)=" \
1295 # -D__extension__= -D__restrict="" \
1296 # -D__gnuc_va_list=char -D__builtin_va_list=char
1299 # This is for cproto 3 patchlevel 9 or above (currently 4.6, 4.7g)
1300 # __inline and __attribute__ are now recognized by cproto
1301 # -D"foo()=" is not supported by all compilers so do not use it
1304 # maybe the "/usr/bin/cc -E" has to be adjusted for some systems
1305 # This is for cproto 3.5 patchlevel 3:
1306 # PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR)
1308 # Use this for cproto 3 patchlevel 6 or below (use "cproto -V" to check):
1309 # PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR)
1311 # Use this for cproto 3 patchlevel 7 or above (use "cproto -V" to check):
1312 PROTO_FLAGS
= -m
-M__ARGS
-d
-E
"$(CPP)" $(NO_ATTR
)
1315 ################################################
1316 ## no changes required below this line ##
1317 ################################################
1322 .SUFFIXES
: .c .o .pro
1324 PRE_DEFS
= -Iproto
$(DEFS
) $(GUI_DEFS
) $(GUI_IPATH
) $(CPPFLAGS
) $(EXTRA_IPATHS
)
1325 POST_DEFS
= $(X_CFLAGS
) $(LUA_CFLAGS
) $(MZSCHEME_CFLAGS
) $(PERL_CFLAGS
) $(ECL_CFLAGS
) $(PYTHON_CFLAGS
) $(TCL_CFLAGS
) $(RUBY_CFLAGS
) $(EXTRA_DEFS
)
1327 ALL_CFLAGS
= $(PRE_DEFS
) $(CFLAGS
) $(PROFILE_CFLAGS
) $(POST_DEFS
)
1329 # Exclude $CFLAGS for osdef.sh, for Mac 10.4 some flags don't work together
1331 OSDEF_CFLAGS
= $(PRE_DEFS
) $(POST_DEFS
)
1333 LINT_CFLAGS
= -DLINT
-I.
$(PRE_DEFS
) $(POST_DEFS
) -Dinline
= -D__extension__
= -Dalloca
=alloca
1335 LINT_EXTRA
= -DUSE_SNIFF
-DHANGUL_INPUT
-D
"__attribute__(x)="
1337 DEPEND_CFLAGS
= -DPROTO
-DDEPEND
-DFEAT_GUI
$(LINT_CFLAGS
)
1339 # If you have problems with flags that cproto doesn't support, and you are
1340 # using GNU make, you can try using the other line to filter out arguments.
1341 #PFLAGS = $(PROTO_FLAGS) -DPROTO $(filter -D% -I%, $(LINT_CFLAGS))
1342 PFLAGS
= $(PROTO_FLAGS
) -DPROTO
$(LINT_CFLAGS
)
1344 ALL_LIB_DIRS
= $(GUI_LIBS_DIR
) $(X_LIBS_DIR
)
1345 ALL_LIBS
= $(GUI_LIBS1
) $(GUI_X_LIBS
) $(GUI_LIBS2
) $(X_PRE_LIBS
) $(X_LIBS
) $(X_EXTRA_LIBS
) $(LIBS
) $(EXTRA_LIBS
) $(LUA_LIBS
) $(MZSCHEME_LIBS
) $(PERL_LIBS
) $(PYTHON_LIBS
) $(TCL_LIBS
) $(RUBY_LIBS
) $(PROFILE_LIBS
) $(ECL_LIBS
)
1348 DEST_BIN
= $(DESTDIR
)$(BINDIR
)
1349 DEST_VIM
= $(DESTDIR
)$(VIMLOC
)
1350 DEST_RT
= $(DESTDIR
)$(VIMRTLOC
)
1351 DEST_HELP
= $(DESTDIR
)$(HELPSUBLOC
)
1352 DEST_COL
= $(DESTDIR
)$(COLSUBLOC
)
1353 DEST_SYN
= $(DESTDIR
)$(SYNSUBLOC
)
1354 DEST_IND
= $(DESTDIR
)$(INDSUBLOC
)
1355 DEST_AUTO
= $(DESTDIR
)$(AUTOSUBLOC
)
1356 DEST_PLUG
= $(DESTDIR
)$(PLUGSUBLOC
)
1357 DEST_FTP
= $(DESTDIR
)$(FTPLUGSUBLOC
)
1358 DEST_LANG
= $(DESTDIR
)$(LANGSUBLOC
)
1359 DEST_COMP
= $(DESTDIR
)$(COMPSUBLOC
)
1360 DEST_KMAP
= $(DESTDIR
)$(KMAPSUBLOC
)
1361 DEST_MACRO
= $(DESTDIR
)$(MACROSUBLOC
)
1362 DEST_TOOLS
= $(DESTDIR
)$(TOOLSSUBLOC
)
1363 DEST_TUTOR
= $(DESTDIR
)$(TUTORSUBLOC
)
1364 DEST_SPELL
= $(DESTDIR
)$(SPELLSUBLOC
)
1365 DEST_SCRIPT
= $(DESTDIR
)$(SCRIPTLOC
)
1366 DEST_PRINT
= $(DESTDIR
)$(PRINTSUBLOC
)
1367 DEST_MAN_TOP
= $(DESTDIR
)$(MANDIR
)
1369 # We assume that the ".../man/xx/man1/" directory is for latin1 manual pages.
1370 # Some systems use UTF-8, but these should find the ".../man/xx.UTF-8/man1/"
1372 # FreeBSD uses ".../man/xx.ISO8859-1/man1" for latin1, use that one too.
1373 DEST_MAN
= $(DEST_MAN_TOP
)$(MAN1DIR
)
1374 DEST_MAN_FR
= $(DEST_MAN_TOP
)/fr
$(MAN1DIR
)
1375 DEST_MAN_FR_I
= $(DEST_MAN_TOP
)/fr.ISO8859-1
$(MAN1DIR
)
1376 DEST_MAN_FR_U
= $(DEST_MAN_TOP
)/fr.UTF-8
$(MAN1DIR
)
1377 DEST_MAN_IT
= $(DEST_MAN_TOP
)/it
$(MAN1DIR
)
1378 DEST_MAN_IT_I
= $(DEST_MAN_TOP
)/it.ISO8859-1
$(MAN1DIR
)
1379 DEST_MAN_IT_U
= $(DEST_MAN_TOP
)/it.UTF-8
$(MAN1DIR
)
1380 DEST_MAN_PL
= $(DEST_MAN_TOP
)/pl
$(MAN1DIR
)
1381 DEST_MAN_PL_I
= $(DEST_MAN_TOP
)/pl.ISO8859-2
$(MAN1DIR
)
1382 DEST_MAN_PL_U
= $(DEST_MAN_TOP
)/pl.UTF-8
$(MAN1DIR
)
1383 DEST_MAN_RU
= $(DEST_MAN_TOP
)/ru.KOI8-R
$(MAN1DIR
)
1384 DEST_MAN_RU_U
= $(DEST_MAN_TOP
)/ru.UTF-8
$(MAN1DIR
)
1386 # BASIC_SRC: files that are always used
1387 # GUI_SRC: extra GUI files for current configuration
1388 # ALL_GUI_SRC: all GUI files for Unix
1390 # SRC: files used for current configuration
1391 # TAGS_SRC: source files used for make tags
1392 # TAGS_INCL: include files used for make tags
1393 # ALL_SRC: source files used for make depend and make lint
1446 SRC
= $(BASIC_SRC
) $(GUI_SRC
) $(HANGULIN_SRC
) $(LUA_SRC
) $(MZSCHEME_SRC
) \
1447 $(PERL_SRC
) $(PYTHON_SRC
) $(TCL_SRC
) $(RUBY_SRC
) \
1448 $(SNIFF_SRC
) $(WORKSHOP_SRC
) $(WSDEBUG_SRC
) $(ECL_SRC
)
1450 TAGS_SRC
= *.c
*.
cpp if_perl.xs
1452 EXTRA_SRC
= hangulin.c if_lua.c if_mzsch.c auto
/if_perl.c if_perlsfio.c \
1453 if_python.c if_tcl.c if_ruby.c if_sniff.c gui_beval.c \
1454 workshop.c wsdebug.c integration.c netbeans.c if_ecl.c
1456 # All sources, also the ones that are not configured
1457 ALL_SRC
= $(BASIC_SRC
) $(ALL_GUI_SRC
) $(EXTRA_SRC
)
1459 # Which files to check with lint. Select one of these three lines. ALL_SRC
1460 # checks more, but may not work well for checking a GUI that wasn't configured.
1461 # The perl sources also don't work well with lint.
1462 LINT_SRC
= $(BASIC_SRC
) $(GUI_SRC
) $(HANGULIN_SRC
) $(ECL_SRC
) $(PYTHON_SRC
) $(TCL_SRC
) \
1463 $(SNIFF_SRC
) $(WORKSHOP_SRC
) $(WSDEBUG_SRC
) $(NETBEANS_SRC
)
1465 #LINT_SRC = $(ALL_SRC)
1466 #LINT_SRC = $(BASIC_SRC)
1476 objects
/ex_cmds2.o \
1477 objects
/ex_docmd.o \
1479 objects
/ex_getln.o \
1483 objects
/hardcopy.o \
1486 objects
/if_cscope.o \
1487 objects
/if_xcmdsrv.o \
1503 objects
/popupmnu.o \
1504 objects
/quickfix.o \
1586 # Resources used for the Mac are in one directory.
1587 RSRC_DIR
= os_mac_rsrc
1589 PRO_MANUAL
= os_amiga.pro os_msdos.pro os_win16.pro os_win32.pro \
1590 os_mswin.pro os_beos.pro os_vms.pro os_riscos.pro
$(PERL_PRO
)
1592 # Default target is making the executable and tools
1593 all: $(VIMTARGET
) $(TOOLS
) languages
$(GUI_BUNDLE
)
1597 # Run configure with all the setting from above.
1599 # Note: auto/config.h doesn't depend on configure, because running configure
1600 # doesn't always update auto/config.h. The timestamp isn't changed if the
1601 # file contents didn't change (to avoid recompiling everything). Including a
1602 # dependency on auto/config.h would cause running configure each time when
1603 # auto/config.h isn't updated. The dependency on auto/config.mk should make
1604 # sure configure is run when it's needed.
1606 config auto
/config.mk
: auto
/configure config.mk.in config.h.in
1607 GUI_INC_LOC
="$(GUI_INC_LOC)" GUI_LIB_LOC
="$(GUI_LIB_LOC)" \
1608 CC
="$(CC)" CPPFLAGS
="$(CPPFLAGS)" CFLAGS
="$(CFLAGS)" \
1609 LDFLAGS
="$(LDFLAGS)" $(CONF_SHELL
) srcdir="$(srcdir)" \
1610 .
/configure
$(CONF_OPT_GUI
) $(CONF_OPT_X
) $(CONF_OPT_XSMP
) \
1611 $(CONF_OPT_DARWIN
) $(CONF_OPT_PERL
) $(CONF_OPT_PYTHON
) \
1612 $(CONF_OPT_TCL
) $(CONF_OPT_RUBY
) $(CONF_OPT_NLS
) \
1613 $(CONF_OPT_CSCOPE
) $(CONF_OPT_MULTIBYTE
) $(CONF_OPT_INPUT
) \
1614 $(CONF_OPT_OUTPUT
) $(CONF_OPT_GPM
) $(CONF_OPT_WORKSHOP
) \
1615 $(CONF_OPT_SNIFF
) $(CONF_OPT_FEAT
) $(CONF_TERM_LIB
) \
1616 $(CONF_OPT_COMPBY
) $(CONF_OPT_ACL
) $(CONF_OPT_NETBEANS
) \
1617 $(CONF_ARGS
) $(CONF_OPT_MZSCHEME
) $(CONF_OPT_PLTHOME
) \
1618 $(CONF_OPT_LUA
) $(CONF_OPT_LUA_PREFIX
) \
1619 $(CONF_OPT_SYSMOUSE
) $(CONF_OPT_ECL
)
1621 # Use "make reconfig" to rerun configure without cached values.
1622 # When config.h changes, most things will be recompiled automatically.
1623 # Invoke $(MAKE) to run config with the empty auto/config.mk.
1624 # Invoke $(MAKE) to build all with the filled auto/config.mk.
1625 reconfig
: scratch
clean
1626 $(MAKE
) -f Makefile config
1627 $(MAKE
) -f Makefile
all
1629 # Run autoconf to produce auto/configure.
1631 # - DO NOT RUN autoconf MANUALLY! It will overwrite ./configure instead of
1632 # producing auto/configure.
1633 # - autoconf is not run automatically, because a patch usually changes both
1634 # configure.in and auto/configure but can't update the timestamps. People
1635 # who do not have (the correct version of) autoconf would run into trouble.
1637 # Two tricks are required to make autoconf put its output in the "auto" dir:
1638 # - Temporarily move the ./configure script to ./configure.save. Don't
1639 # overwrite it, it's probably the result of an aborted autoconf.
1640 # - Use sed to change ./config.log to auto/config.log in the configure script.
1641 # Autoconf 2.5x (2.59 at least) produces a few more files that we need to take
1643 # - configure.lineno: has the line numbers replaced with $LINENO. That
1644 # improves patches a LOT, thus use it instead (until someone says it doesn't
1645 # work on some system).
1646 # - autom4te.cache directory is created and not cleaned up. Delete it.
1647 # - Uses ">config.log" instead of "./config.log".
1649 if
test ! -f configure.save
; then mv configure configure.save
; fi
1651 sed
-e
's+>config.log+>auto/config.log+' -e
's+\./config.log+auto/config.log+' configure
> auto
/configure
1652 chmod
755 auto
/configure
1653 mv
-f configure.save configure
1654 -rm -rf autom4te.cache
1655 -rm -f auto
/config.status auto
/config.cache
1657 # Re-execute this Makefile to include the new auto/config.mk produced by
1658 # configure Only used when typing "make" with a fresh auto/config.mk.
1660 $(MAKE
) -f Makefile
all
1663 # The normal command to compile a .c file to its .o file.
1664 CCC
= $(CC
) -c
-I
$(srcdir) $(ALL_CFLAGS
)
1667 # Link the target for normal use or debugging.
1668 # A shell script is used to try linking without unneccesary libraries.
1669 $(VIMTARGET
): auto
/config.mk objects
$(OBJ
) version.c version.h
1670 $(CCC
) version.c
-o objects
/version.o
1671 @LINK
="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \
1672 -o $(VIMTARGET) $(OBJ) objects/version.o $(ALL_LIBS)" \
1673 MAKE
="$(MAKE)" sh
$(srcdir)/link.sh
1675 xxd
/xxd
$(EXEEXT
): xxd
/xxd.c
1676 cd xxd
; CC
="$(CC)" CFLAGS
="$(CPPFLAGS) $(CFLAGS)" \
1679 # Build the language specific files if they were unpacked.
1680 # Generate the converted .mo files separately, it's no problem if this fails.
1682 @if
test -n
"$(MAKEMO)" -a
-f
$(PODIR
)/Makefile
; then \
1684 CC
="$(CC)" $(MAKE
) prefix=$(DESTDIR
)$(prefix); \
1686 -@if
test -n
"$(MAKEMO)" -a
-f
$(PODIR
)/Makefile
; then \
1687 cd
$(PODIR
); CC
="$(CC)" $(MAKE
) prefix=$(DESTDIR
)$(prefix) converted
; \
1690 # Update the *.po files for changes in the sources. Only run manually.
1692 cd
$(PODIR
); CC
="$(CC)" $(MAKE
) prefix=$(DESTDIR
)$(prefix) update-po
1694 # Generate function prototypes. This is not needed to compile vim, but if
1695 # you want to use it, cproto is out there on the net somewhere -- Webb
1697 # When generating os_amiga.pro, os_msdos.pro and os_win32.pro there will be a
1698 # few include files that can not be found, that's OK.
1700 proto
: $(PRO_AUTO
) $(PRO_MANUAL
)
1702 ### Would be nice if this would work for "normal" make.
1703 ### Currently it only works for (Free)BSD make.
1704 #$(PRO_AUTO): $$(*F).c
1705 # cproto $(PFLAGS) -DFEAT_GUI $(*F).c > $@
1707 # Always define FEAT_GUI. This may generate a few warnings if it's also
1708 # defined in auto/config.h, you can ignore that.
1710 cproto
$(PFLAGS
) -DFEAT_GUI
$< > proto
/$@
1711 echo
"/* vim: set ft=c : */" >> proto
/$@
1713 os_amiga.pro
: os_amiga.c
1714 cproto
$(PFLAGS
) -DAMIGA
-UHAVE_CONFIG_H
-DBPTR
=char
* $< > proto
/$@
1715 echo
"/* vim: set ft=c : */" >> proto
/$@
1717 os_msdos.pro
: os_msdos.c
1718 cproto
$(PFLAGS
) -DMSDOS
-UHAVE_CONFIG_H
$< > proto
/$@
1719 echo
"/* vim: set ft=c : */" >> proto
/$@
1721 os_win16.pro
: os_win16.c
1722 cproto
$(PFLAGS
) -DWIN16
-UHAVE_CONFIG_H
$< > proto
/$@
1723 echo
"/* vim: set ft=c : */" >> proto
/$@
1725 os_win32.pro
: os_win32.c
1726 cproto
$(PFLAGS
) -DWIN32
-UHAVE_CONFIG_H
$< > proto
/$@
1727 echo
"/* vim: set ft=c : */" >> proto
/$@
1729 os_mswin.pro
: os_mswin.c
1730 cproto
$(PFLAGS
) -DWIN16
-DWIN32
-UHAVE_CONFIG_H
$< > proto
/$@
1731 echo
"/* vim: set ft=c : */" >> proto
/$@
1733 os_beos.pro
: os_beos.c
1734 cproto
$(PFLAGS
) -D__BEOS__
-UHAVE_CONFIG_H
$< > proto
/$@
1735 echo
"/* vim: set ft=c : */" >> proto
/$@
1737 os_vms.pro
: os_vms.c
1738 # must use os_vms_conf.h for auto/config.h
1739 mv auto
/config.h auto
/config.h.save
1740 cp os_vms_conf.h auto
/config.h
1741 cproto
$(PFLAGS
) -DVMS
-UFEAT_GUI_ATHENA
-UFEAT_GUI_NEXTAW
-UFEAT_GUI_MOTIF
-UFEAT_GUI_GTK
$< > proto
/$@
1742 echo
"/* vim: set ft=c : */" >> proto
/$@
1744 mv auto
/config.h.save auto
/config.h
1746 # if_perl.pro is special: Use the generated if_perl.c for input and remove
1747 # prototypes for local functions.
1748 if_perl.pro
: auto
/if_perl.c
1749 cproto
$(PFLAGS
) -DFEAT_GUI auto
/if_perl.c | sed
"/_VI/d" > proto
/$@
1755 # Note: tags is made for the currently configured version, can't include both
1756 # Motif and Athena GUI
1757 # You can ignore error messages for missing files.
1759 $(TAGPRG
) $(TAGS_SRC
) $(TAGS_INCL
)
1761 # Make a highlight file for types. Requires Exuberant ctags and awk
1763 types.vim
: $(TAGS_SRC
) $(TAGS_INCL
)
1764 ctags
--c-kinds
=gstu
-o-
$(TAGS_SRC
) $(TAGS_INCL
) |\
1765 awk
'BEGIN{printf("syntax keyword Type\t")}\
1766 {printf("%s ", $$1)}END{print ""}' > $@
1768 # Execute the test scripts. Run these after compiling Vim, before installing.
1769 # This doesn't depend on $(VIMTARGET), because that won't work when configure
1770 # wasn't run yet. Restart make to build it instead.
1772 # This will produce a lot of garbage on your screen, including a few error
1773 # messages. Don't worry about that.
1774 # If there is a real error, there will be a difference between "test.out" and
1775 # a "test99.ok" file.
1776 # If everything is alright, the final message will be "ALL DONE". If not you
1777 # get "TEST FAILURE".
1780 $(MAKE
) -f Makefile
$(VIMTARGET
)
1781 -if
test -n
"$(MAKEMO)" -a
-f
$(PODIR
)/Makefile
; then \
1782 cd
$(PODIR
); $(MAKE
) -f Makefile
check VIM
=..
/$(VIMTARGET
); \
1784 -if
test $(VIMTARGET
) != vim
-a
! -r vim
; then \
1785 ln
-s
$(VIMTARGET
) vim
; \
1787 cd testdir
; $(MAKE
) -f Makefile
$(GUI_TESTTARGET
) VIMPROG
=..
/$(VIMTARGET
) $(GUI_TESTARG
)
1790 cd testdir
; $(MAKE
) -f Makefile
clean
1791 if
test -d
$(PODIR
); then \
1792 cd
$(PODIR
); $(MAKE
) checkclean
; \
1795 install: $(GUI_INSTALL
)
1797 install_normal
: installvim installtools
$(INSTALL_LANGS
) install-icons
1799 install_gui_extra
: installgtutorbin
1801 installvim
: installvimbin installtutorbin \
1802 installruntime installlinks installmanlinks
1805 # Avoid overwriting an existing executable, somebody might be running it and
1806 # overwriting it could cause it to crash. Deleting it is OK, it won't be
1807 # really deleted until all running processes for it have exited. It is
1808 # renamed first, in case the deleting doesn't work.
1810 # If you want to keep an older version, rename it before running "make
1813 installvimbin
: $(VIMTARGET
) $(DESTDIR
)$(exec_prefix) $(DEST_BIN
)
1814 -if
test -f
$(DEST_BIN
)/$(VIMTARGET
); then \
1815 mv
-f
$(DEST_BIN
)/$(VIMTARGET
) $(DEST_BIN
)/$(VIMNAME
).
rm; \
1816 rm -f
$(DEST_BIN
)/$(VIMNAME
).
rm; \
1818 $(INSTALL_PROG
) $(VIMTARGET
) $(DEST_BIN
)
1819 $(STRIP
) $(DEST_BIN
)/$(VIMTARGET
)
1820 chmod
$(BINMOD
) $(DEST_BIN
)/$(VIMTARGET
)
1821 # may create a link to the new executable from /usr/bin/vi
1824 # Long list of arguments for the shell script that installs the manual pages
1826 INSTALLMANARGS
= $(VIMLOC
) $(SCRIPTLOC
) $(VIMRCLOC
) $(HELPSOURCE
) $(MANMOD
) \
1827 $(VIMNAME
) $(VIMDIFFNAME
) $(EVIMNAME
)
1829 # Install most of the runtime files
1830 installruntime
: installrtbase installmacros installtutor installspell
1832 # install the help files; first adjust the contents for the final location
1833 installrtbase
: $(HELPSOURCE
)/vim
.1 $(DEST_VIM
) $(DEST_RT
) \
1834 $(DEST_HELP
) $(DEST_PRINT
) $(DEST_COL
) $(DEST_SYN
) $(DEST_IND
) \
1835 $(DEST_FTP
) $(DEST_AUTO
) $(DEST_AUTO
)/xml
$(DEST_PLUG
) \
1836 $(DEST_TUTOR
) $(DEST_SPELL
) $(DEST_COMP
)
1837 -$(SHELL
) .
/installman.sh
install $(DEST_MAN
) "" $(INSTALLMANARGS
)
1838 @echo generating help
tags
1839 # Generate the help tags with ":helptags" to handle all languages.
1840 -@cd
$(HELPSOURCE
); $(MAKE
) VIMEXE
=$(DEST_BIN
)/$(VIMTARGET
) vimtags
1842 files
=`ls *.txt tags`; \
1843 files
="$$files `ls *.??x tags-?? 2>/dev/null || true`"; \
1844 $(INSTALL_DATA
) $$files $(DEST_HELP
); \
1846 chmod
$(HELPMOD
) $$files
1847 $(INSTALL_DATA
) $(HELPSOURCE
)/*.pl
$(DEST_HELP
)
1848 chmod
$(SCRIPTMOD
) $(DEST_HELP
)/*.pl
1849 # install the menu files
1850 $(INSTALL_DATA
) $(SCRIPTSOURCE
)/menu.vim
$(SYS_MENU_FILE
)
1851 chmod
$(VIMSCRIPTMOD
) $(SYS_MENU_FILE
)
1852 $(INSTALL_DATA
) $(SCRIPTSOURCE
)/synmenu.vim
$(SYS_SYNMENU_FILE
)
1853 chmod
$(VIMSCRIPTMOD
) $(SYS_SYNMENU_FILE
)
1854 $(INSTALL_DATA
) $(SCRIPTSOURCE
)/delmenu.vim
$(SYS_DELMENU_FILE
)
1855 chmod
$(VIMSCRIPTMOD
) $(SYS_DELMENU_FILE
)
1856 # install the evim file
1857 $(INSTALL_DATA
) $(SCRIPTSOURCE
)/mswin.vim
$(MSWIN_FILE
)
1858 chmod
$(VIMSCRIPTMOD
) $(MSWIN_FILE
)
1859 $(INSTALL_DATA
) $(SCRIPTSOURCE
)/evim.vim
$(EVIM_FILE
)
1860 chmod
$(VIMSCRIPTMOD
) $(EVIM_FILE
)
1861 # install the bugreport file
1862 $(INSTALL_DATA
) $(SCRIPTSOURCE
)/bugreport.vim
$(SYS_BUGR_FILE
)
1863 chmod
$(VIMSCRIPTMOD
) $(SYS_BUGR_FILE
)
1864 # install the example vimrc files
1865 $(INSTALL_DATA
) $(SCRIPTSOURCE
)/vimrc_example.vim
$(DEST_SCRIPT
)
1866 chmod
$(VIMSCRIPTMOD
) $(DEST_SCRIPT
)/vimrc_example.vim
1867 $(INSTALL_DATA
) $(SCRIPTSOURCE
)/gvimrc_example.vim
$(DEST_SCRIPT
)
1868 chmod
$(VIMSCRIPTMOD
) $(DEST_SCRIPT
)/gvimrc_example.vim
1869 # install the file type detection files
1870 $(INSTALL_DATA
) $(SCRIPTSOURCE
)/filetype.vim
$(SYS_FILETYPE_FILE
)
1871 chmod
$(VIMSCRIPTMOD
) $(SYS_FILETYPE_FILE
)
1872 $(INSTALL_DATA
) $(SCRIPTSOURCE
)/ftoff.vim
$(SYS_FTOFF_FILE
)
1873 chmod
$(VIMSCRIPTMOD
) $(SYS_FTOFF_FILE
)
1874 $(INSTALL_DATA
) $(SCRIPTSOURCE
)/scripts.vim
$(SYS_SCRIPTS_FILE
)
1875 chmod
$(VIMSCRIPTMOD
) $(SYS_SCRIPTS_FILE
)
1876 $(INSTALL_DATA
) $(SCRIPTSOURCE
)/ftplugin.vim
$(SYS_FTPLUGIN_FILE
)
1877 chmod
$(VIMSCRIPTMOD
) $(SYS_FTPLUGIN_FILE
)
1878 $(INSTALL_DATA
) $(SCRIPTSOURCE
)/ftplugof.vim
$(SYS_FTPLUGOF_FILE
)
1879 chmod
$(VIMSCRIPTMOD
) $(SYS_FTPLUGOF_FILE
)
1880 $(INSTALL_DATA
) $(SCRIPTSOURCE
)/indent.vim
$(SYS_INDENT_FILE
)
1881 chmod
$(VIMSCRIPTMOD
) $(SYS_INDENT_FILE
)
1882 $(INSTALL_DATA
) $(SCRIPTSOURCE
)/indoff.vim
$(SYS_INDOFF_FILE
)
1883 chmod
$(VIMSCRIPTMOD
) $(SYS_INDOFF_FILE
)
1884 $(INSTALL_DATA
) $(SCRIPTSOURCE
)/optwin.vim
$(SYS_OPTWIN_FILE
)
1885 chmod
$(VIMSCRIPTMOD
) $(SYS_OPTWIN_FILE
)
1886 $(INSTALL_DATA
) $(SCRIPTSOURCE
)/if_ecl.lisp
$(SYS_IF_ECL_FILE
)
1887 $(INSTALL_DATA
) $(SCRIPTSOURCE
)/if_ecl.vim
$(SYS_IF_ECL_VIM_FILE
)
1888 # install the print resource files
1889 cd
$(PRINTSOURCE
); $(INSTALL_DATA
) *.ps
$(DEST_PRINT
)
1890 cd
$(DEST_PRINT
); chmod
$(FILEMOD
) *.ps
1891 # install the colorscheme files
1892 cd
$(COLSOURCE
); $(INSTALL_DATA
) *.vim README.txt
$(DEST_COL
)
1893 cd
$(DEST_COL
); chmod
$(HELPMOD
) *.vim README.txt
1894 # install the syntax files
1895 cd
$(SYNSOURCE
); $(INSTALL_DATA
) *.vim README.txt
$(DEST_SYN
)
1896 cd
$(DEST_SYN
); chmod
$(HELPMOD
) *.vim README.txt
1897 # install the indent files
1898 cd
$(INDSOURCE
); $(INSTALL_DATA
) *.vim README.txt
$(DEST_IND
)
1899 cd
$(DEST_IND
); chmod
$(HELPMOD
) *.vim README.txt
1900 # install the standard autoload files
1901 cd
$(AUTOSOURCE
); $(INSTALL_DATA
) *.vim README.txt
$(DEST_AUTO
)
1902 cd
$(DEST_AUTO
); chmod
$(HELPMOD
) *.vim README.txt
1903 cd
$(AUTOSOURCE
)/xml
; $(INSTALL_DATA
) *.vim
$(DEST_AUTO
)/xml
1904 cd
$(DEST_AUTO
)/xml
; chmod
$(HELPMOD
) *.vim
1905 # install the standard plugin files
1906 cd
$(PLUGSOURCE
); $(INSTALL_DATA
) *.vim README.txt
$(DEST_PLUG
)
1907 cd
$(DEST_PLUG
); chmod
$(HELPMOD
) *.vim README.txt
1908 # install the ftplugin files
1909 cd
$(FTPLUGSOURCE
); $(INSTALL_DATA
) *.vim README.txt logtalk.dict
$(DEST_FTP
)
1910 cd
$(DEST_FTP
); chmod
$(HELPMOD
) *.vim README.txt
1911 # install the compiler files
1912 cd
$(COMPSOURCE
); $(INSTALL_DATA
) *.vim README.txt
$(DEST_COMP
)
1913 cd
$(DEST_COMP
); chmod
$(HELPMOD
) *.vim README.txt
1915 installmacros
: $(DEST_VIM
) $(DEST_RT
) $(DEST_MACRO
)
1916 $(INSTALL_DATA_R
) $(MACROSOURCE
)/* $(DEST_MACRO
)
1917 chmod
$(DIRMOD
) `find $(DEST_MACRO) -type d -print`
1918 chmod
$(FILEMOD
) `find $(DEST_MACRO) -type f -print`
1919 chmod
$(SCRIPTMOD
) $(DEST_MACRO
)/less.sh
1920 # When using CVS some CVS directories might have been copied.
1921 cvs
=`find $(DEST_MACRO) \( -name CVS -o -name AAPDIR \) -print`; \
1922 if
test -n
"$$cvs"; then \
1926 # install the tutor files
1927 installtutorbin
: $(DEST_VIM
)
1928 $(INSTALL_DATA
) vimtutor
$(DEST_BIN
)/$(VIMNAME
)tutor
1929 chmod
$(SCRIPTMOD
) $(DEST_BIN
)/$(VIMNAME
)tutor
1931 installgtutorbin
: $(DEST_VIM
)
1932 $(INSTALL_DATA
) gvimtutor
$(DEST_BIN
)/$(GVIMNAME
)tutor
1933 chmod
$(SCRIPTMOD
) $(DEST_BIN
)/$(GVIMNAME
)tutor
1935 installtutor
: $(DEST_RT
) $(DEST_TUTOR
)
1936 -$(INSTALL_DATA
) $(TUTORSOURCE
)/README
* $(TUTORSOURCE
)/tutor
* $(DEST_TUTOR
)
1937 chmod
$(HELPMOD
) $(DEST_TUTOR
)/*
1939 # Install the spell files, if they exist. This assumes at least the English
1940 # spell file is there.
1941 installspell
: $(DEST_VIM
) $(DEST_RT
) $(DEST_SPELL
)
1942 if
test -f
$(SPELLSOURCE
)/en.latin1.spl
; then \
1943 $(INSTALL_DATA
) $(SPELLSOURCE
)/*.spl
$(SPELLSOURCE
)/*.sug
$(SPELLSOURCE
)/*.vim
$(DEST_SPELL
); \
1944 chmod
$(HELPMOD
) $(DEST_SPELL
)/*.spl
$(DEST_SPELL
)/*.sug
$(DEST_SPELL
)/*.vim
; \
1947 # install helper program xxd
1948 installtools
: $(TOOLS
) $(DESTDIR
)$(exec_prefix) $(DEST_BIN
) \
1949 $(TOOLSSOURCE
) $(DEST_VIM
) $(DEST_RT
) $(DEST_TOOLS
) \
1950 $(INSTALL_TOOL_LANGS
)
1951 if
test -f
$(DEST_BIN
)/xxd
$(EXEEXT
); then \
1952 mv
-f
$(DEST_BIN
)/xxd
$(EXEEXT
) $(DEST_BIN
)/xxd.
rm; \
1953 rm -f
$(DEST_BIN
)/xxd.
rm; \
1955 $(INSTALL_PROG
) xxd
/xxd
$(EXEEXT
) $(DEST_BIN
)
1956 $(STRIP
) $(DEST_BIN
)/xxd
$(EXEEXT
)
1957 chmod
$(BINMOD
) $(DEST_BIN
)/xxd
$(EXEEXT
)
1958 -$(SHELL
) .
/installman.sh xxd
$(DEST_MAN
) "" $(INSTALLMANARGS
)
1960 # install the runtime tools
1961 $(INSTALL_DATA_R
) $(TOOLSSOURCE
)/* $(DEST_TOOLS
)
1962 # When using CVS some CVS directories might have been copied.
1963 cvs
=`find $(DEST_TOOLS) \( -name CVS -o -name AAPDIR \) -print`; \
1964 if
test -n
"$$cvs"; then \
1967 -chmod
$(FILEMOD
) $(DEST_TOOLS
)/*
1968 # replace the path in some tools
1969 perlpath
=`./which.sh perl` && sed
-e
"s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE
)/efm_perl.pl
>$(DEST_TOOLS
)/efm_perl.pl
1970 awkpath
=`./which.sh nawk` && sed
-e
"s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE
)/mve.awk
>$(DEST_TOOLS
)/mve.awk
; if
test -z
"$$awkpath"; then \
1971 awkpath
=`./which.sh gawk` && sed
-e
"s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE
)/mve.awk
>$(DEST_TOOLS
)/mve.awk
; if
test -z
"$$awkpath"; then \
1972 awkpath
=`./which.sh awk` && sed
-e
"s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE
)/mve.awk
>$(DEST_TOOLS
)/mve.awk
; fi
; fi
1973 -chmod
$(SCRIPTMOD
) `grep -l "^#!" $(DEST_TOOLS)/*`
1975 # install the language specific files for tools, if they were unpacked
1976 install-tool-languages
:
1977 -$(SHELL
) .
/installman.sh xxd
$(DEST_MAN_FR
) "-fr" $(INSTALLMANARGS
)
1978 -$(SHELL
) .
/installman.sh xxd
$(DEST_MAN_FR_I
) "-fr" $(INSTALLMANARGS
)
1979 -$(SHELL
) .
/installman.sh xxd
$(DEST_MAN_FR_U
) "-fr.UTF-8" $(INSTALLMANARGS
)
1980 -$(SHELL
) .
/installman.sh xxd
$(DEST_MAN_IT
) "-it" $(INSTALLMANARGS
)
1981 -$(SHELL
) .
/installman.sh xxd
$(DEST_MAN_IT_I
) "-it" $(INSTALLMANARGS
)
1982 -$(SHELL
) .
/installman.sh xxd
$(DEST_MAN_IT_U
) "-it.UTF-8" $(INSTALLMANARGS
)
1983 -$(SHELL
) .
/installman.sh xxd
$(DEST_MAN_PL
) "-pl" $(INSTALLMANARGS
)
1984 -$(SHELL
) .
/installman.sh xxd
$(DEST_MAN_PL_I
) "-pl" $(INSTALLMANARGS
)
1985 -$(SHELL
) .
/installman.sh xxd
$(DEST_MAN_PL_U
) "-pl.UTF-8" $(INSTALLMANARGS
)
1986 -$(SHELL
) .
/installman.sh xxd
$(DEST_MAN_RU
) "-ru" $(INSTALLMANARGS
)
1987 -$(SHELL
) .
/installman.sh xxd
$(DEST_MAN_RU_U
) "-ru.UTF-8" $(INSTALLMANARGS
)
1989 # install the language specific files, if they were unpacked
1990 install-languages
: languages
$(DEST_LANG
) $(DEST_KMAP
)
1991 -$(SHELL
) .
/installman.sh
install $(DEST_MAN_FR
) "-fr" $(INSTALLMANARGS
)
1992 -$(SHELL
) .
/installman.sh
install $(DEST_MAN_FR_I
) "-fr" $(INSTALLMANARGS
)
1993 -$(SHELL
) .
/installman.sh
install $(DEST_MAN_FR_U
) "-fr.UTF-8" $(INSTALLMANARGS
)
1994 -$(SHELL
) .
/installman.sh
install $(DEST_MAN_IT
) "-it" $(INSTALLMANARGS
)
1995 -$(SHELL
) .
/installman.sh
install $(DEST_MAN_IT_I
) "-it" $(INSTALLMANARGS
)
1996 -$(SHELL
) .
/installman.sh
install $(DEST_MAN_IT_U
) "-it.UTF-8" $(INSTALLMANARGS
)
1997 -$(SHELL
) .
/installman.sh
install $(DEST_MAN_PL
) "-pl" $(INSTALLMANARGS
)
1998 -$(SHELL
) .
/installman.sh
install $(DEST_MAN_PL_I
) "-pl" $(INSTALLMANARGS
)
1999 -$(SHELL
) .
/installman.sh
install $(DEST_MAN_PL_U
) "-pl.UTF-8" $(INSTALLMANARGS
)
2000 -$(SHELL
) .
/installman.sh
install $(DEST_MAN_RU
) "-ru" $(INSTALLMANARGS
)
2001 -$(SHELL
) .
/installman.sh
install $(DEST_MAN_RU_U
) "-ru.UTF-8" $(INSTALLMANARGS
)
2002 -$(SHELL
) .
/installml.sh
install "$(GUI_MAN_TARGETS)" \
2003 $(DEST_MAN_FR
) $(INSTALLMLARGS
)
2004 -$(SHELL
) .
/installml.sh
install "$(GUI_MAN_TARGETS)" \
2005 $(DEST_MAN_FR_I
) $(INSTALLMLARGS
)
2006 -$(SHELL
) .
/installml.sh
install "$(GUI_MAN_TARGETS)" \
2007 $(DEST_MAN_FR_U
) $(INSTALLMLARGS
)
2008 -$(SHELL
) .
/installml.sh
install "$(GUI_MAN_TARGETS)" \
2009 $(DEST_MAN_IT
) $(INSTALLMLARGS
)
2010 -$(SHELL
) .
/installml.sh
install "$(GUI_MAN_TARGETS)" \
2011 $(DEST_MAN_IT_I
) $(INSTALLMLARGS
)
2012 -$(SHELL
) .
/installml.sh
install "$(GUI_MAN_TARGETS)" \
2013 $(DEST_MAN_IT_U
) $(INSTALLMLARGS
)
2014 -$(SHELL
) .
/installml.sh
install "$(GUI_MAN_TARGETS)" \
2015 $(DEST_MAN_PL
) $(INSTALLMLARGS
)
2016 -$(SHELL
) .
/installml.sh
install "$(GUI_MAN_TARGETS)" \
2017 $(DEST_MAN_PL_I
) $(INSTALLMLARGS
)
2018 -$(SHELL
) .
/installml.sh
install "$(GUI_MAN_TARGETS)" \
2019 $(DEST_MAN_PL_U
) $(INSTALLMLARGS
)
2020 -$(SHELL
) .
/installml.sh
install "$(GUI_MAN_TARGETS)" \
2021 $(DEST_MAN_RU
) $(INSTALLMLARGS
)
2022 -$(SHELL
) .
/installml.sh
install "$(GUI_MAN_TARGETS)" \
2023 $(DEST_MAN_RU_U
) $(INSTALLMLARGS
)
2024 if
test -n
"$(MAKEMO)" -a
-f
$(PODIR
)/Makefile
; then \
2025 cd
$(PODIR
); $(MAKE
) prefix=$(DESTDIR
)$(prefix) LOCALEDIR
=$(DEST_LANG
) \
2026 INSTALL_DATA
=$(INSTALL_DATA
) FILEMOD
=$(FILEMOD
) install; \
2028 if
test -d
$(LANGSOURCE
); then \
2029 $(INSTALL_DATA
) $(LANGSOURCE
)/README.txt
$(LANGSOURCE
)/*.vim
$(DEST_LANG
); \
2030 chmod
$(FILEMOD
) $(DEST_LANG
)/README.txt
$(DEST_LANG
)/*.vim
; \
2032 if
test -d
$(KMAPSOURCE
); then \
2033 $(INSTALL_DATA
) $(KMAPSOURCE
)/README.txt
$(KMAPSOURCE
)/*.vim
$(DEST_KMAP
); \
2034 chmod
$(FILEMOD
) $(DEST_KMAP
)/README.txt
$(DEST_KMAP
)/*.vim
; \
2037 # install the icons for KDE, if the directory exists and the icon doesn't.
2038 ICON48PATH
= $(DESTDIR
)$(DATADIR
)/icons
/hicolor
/48x48
/apps
2039 ICON32PATH
= $(DESTDIR
)$(DATADIR
)/icons
/locolor
/32x32
/apps
2040 ICON16PATH
= $(DESTDIR
)$(DATADIR
)/icons
/locolor
/16x16
/apps
2041 KDEPATH
= $(HOME
)/.kde
/share
/icons
2043 if
test -d
$(ICON48PATH
) -a
-w
$(ICON48PATH
) \
2044 -a
! -f
$(ICON48PATH
)/gvim.png
; then \
2045 $(INSTALL_DATA
) $(SCRIPTSOURCE
)/vim48x48.png
$(ICON48PATH
)/gvim.png
; \
2047 if
test -d
$(ICON32PATH
) -a
-w
$(ICON32PATH
) \
2048 -a
! -f
$(ICON32PATH
)/gvim.png
; then \
2049 $(INSTALL_DATA
) $(SCRIPTSOURCE
)/vim32x32.png
$(ICON32PATH
)/gvim.png
; \
2051 if
test -d
$(ICON16PATH
) -a
-w
$(ICON16PATH
) \
2052 -a
! -f
$(ICON16PATH
)/gvim.png
; then \
2053 $(INSTALL_DATA
) $(SCRIPTSOURCE
)/vim16x16.png
$(ICON16PATH
)/gvim.png
; \
2057 $(HELPSOURCE
)/vim
.1 $(MACROSOURCE
) $(TOOLSSOURCE
):
2058 @echo Runtime files not found.
2059 @echo You need to unpack the runtime archive before running
"make install".
2062 $(DESTDIR
)$(exec_prefix) $(DEST_BIN
) \
2063 $(DEST_VIM
) $(DEST_RT
) $(DEST_HELP
) \
2064 $(DEST_PRINT
) $(DEST_COL
) $(DEST_SYN
) $(DEST_IND
) $(DEST_FTP
) \
2065 $(DEST_LANG
) $(DEST_KMAP
) $(DEST_COMP
) \
2066 $(DEST_MACRO
) $(DEST_TOOLS
) $(DEST_TUTOR
) $(DEST_SPELL
) \
2067 $(DEST_AUTO
) $(DEST_AUTO
)/xml
$(DEST_PLUG
):
2068 -$(SHELL
) .
/mkinstalldirs
$@
2071 # create links from various names to vim. This is only done when the links
2072 # (or executables with the same name) don't exist yet.
2073 installlinks
: $(GUI_TARGETS
) \
2074 $(DEST_BIN
)/$(EXTARGET
) \
2075 $(DEST_BIN
)/$(VIEWTARGET
) \
2076 $(DEST_BIN
)/$(RVIMTARGET
) \
2077 $(DEST_BIN
)/$(RVIEWTARGET
) \
2080 installglinks
: $(DEST_BIN
)/$(GVIMTARGET
) \
2081 $(DEST_BIN
)/$(GVIEWTARGET
) \
2082 $(DEST_BIN
)/$(RGVIMTARGET
) \
2083 $(DEST_BIN
)/$(RGVIEWTARGET
) \
2084 $(DEST_BIN
)/$(EVIMTARGET
) \
2085 $(DEST_BIN
)/$(EVIEWTARGET
) \
2088 installvimdiff
: $(DEST_BIN
)/$(VIMDIFFTARGET
)
2089 installgvimdiff
: $(DEST_BIN
)/$(GVIMDIFFTARGET
)
2091 $(DEST_BIN
)/$(EXTARGET
):
2092 cd
$(DEST_BIN
); ln
-s
$(VIMTARGET
) $(EXTARGET
)
2094 $(DEST_BIN
)/$(VIEWTARGET
):
2095 cd
$(DEST_BIN
); ln
-s
$(VIMTARGET
) $(VIEWTARGET
)
2097 $(DEST_BIN
)/$(GVIMTARGET
):
2098 cd
$(DEST_BIN
); ln
-s
$(VIMTARGET
) $(GVIMTARGET
)
2100 $(DEST_BIN
)/$(GVIEWTARGET
):
2101 cd
$(DEST_BIN
); ln
-s
$(VIMTARGET
) $(GVIEWTARGET
)
2103 $(DEST_BIN
)/$(RVIMTARGET
):
2104 cd
$(DEST_BIN
); ln
-s
$(VIMTARGET
) $(RVIMTARGET
)
2106 $(DEST_BIN
)/$(RVIEWTARGET
):
2107 cd
$(DEST_BIN
); ln
-s
$(VIMTARGET
) $(RVIEWTARGET
)
2109 $(DEST_BIN
)/$(RGVIMTARGET
):
2110 cd
$(DEST_BIN
); ln
-s
$(VIMTARGET
) $(RGVIMTARGET
)
2112 $(DEST_BIN
)/$(RGVIEWTARGET
):
2113 cd
$(DEST_BIN
); ln
-s
$(VIMTARGET
) $(RGVIEWTARGET
)
2115 $(DEST_BIN
)/$(VIMDIFFTARGET
):
2116 cd
$(DEST_BIN
); ln
-s
$(VIMTARGET
) $(VIMDIFFTARGET
)
2118 $(DEST_BIN
)/$(GVIMDIFFTARGET
):
2119 cd
$(DEST_BIN
); ln
-s
$(VIMTARGET
) $(GVIMDIFFTARGET
)
2121 $(DEST_BIN
)/$(EVIMTARGET
):
2122 cd
$(DEST_BIN
); ln
-s
$(VIMTARGET
) $(EVIMTARGET
)
2124 $(DEST_BIN
)/$(EVIEWTARGET
):
2125 cd
$(DEST_BIN
); ln
-s
$(VIMTARGET
) $(EVIEWTARGET
)
2127 # Create links for the manual pages with various names to vim. This is only
2128 # done when the links (or manpages with the same name) don't exist yet.
2130 INSTALLMLARGS
= $(VIMNAME
) $(VIMDIFFNAME
) $(EVIMNAME
) \
2131 $(EXNAME
) $(VIEWNAME
) $(RVIMNAME
) $(RVIEWNAME
) \
2132 $(GVIMNAME
) $(GVIEWNAME
) $(RGVIMNAME
) $(RGVIEWNAME
) \
2133 $(GVIMDIFFNAME
) $(EVIEWNAME
)
2136 -$(SHELL
) .
/installml.sh
install "$(GUI_MAN_TARGETS)" \
2137 $(DEST_MAN
) $(INSTALLMLARGS
)
2139 uninstall: uninstall_runtime
2140 -rm -f
$(DEST_BIN
)/$(VIMTARGET
)
2141 -rm -f
$(DEST_BIN
)/vimtutor
2142 -rm -f
$(DEST_BIN
)/gvimtutor
2143 -rm -f
$(DEST_BIN
)/$(EXTARGET
) $(DEST_BIN
)/$(VIEWTARGET
)
2144 -rm -f
$(DEST_BIN
)/$(GVIMTARGET
) $(DEST_BIN
)/$(GVIEWTARGET
)
2145 -rm -f
$(DEST_BIN
)/$(RVIMTARGET
) $(DEST_BIN
)/$(RVIEWTARGET
)
2146 -rm -f
$(DEST_BIN
)/$(RGVIMTARGET
) $(DEST_BIN
)/$(RGVIEWTARGET
)
2147 -rm -f
$(DEST_BIN
)/$(VIMDIFFTARGET
) $(DEST_BIN
)/$(GVIMDIFFTARGET
)
2148 -rm -f
$(DEST_BIN
)/$(EVIMTARGET
) $(DEST_BIN
)/$(EVIEWTARGET
)
2149 -rm -f
$(DEST_BIN
)/xxd
$(EXEEXT
)
2151 # Note: the "rmdir" will fail if any files were added after "make install"
2153 -$(SHELL
) .
/installman.sh
uninstall $(DEST_MAN
) "" $(INSTALLMANARGS
)
2154 -$(SHELL
) .
/installman.sh
uninstall $(DEST_MAN_FR
) "" $(INSTALLMANARGS
)
2155 -$(SHELL
) .
/installman.sh
uninstall $(DEST_MAN_FR_I
) "" $(INSTALLMANARGS
)
2156 -$(SHELL
) .
/installman.sh
uninstall $(DEST_MAN_FR_U
) "" $(INSTALLMANARGS
)
2157 -$(SHELL
) .
/installman.sh
uninstall $(DEST_MAN_IT
) "" $(INSTALLMANARGS
)
2158 -$(SHELL
) .
/installman.sh
uninstall $(DEST_MAN_IT_I
) "" $(INSTALLMANARGS
)
2159 -$(SHELL
) .
/installman.sh
uninstall $(DEST_MAN_IT_U
) "" $(INSTALLMANARGS
)
2160 -$(SHELL
) .
/installman.sh
uninstall $(DEST_MAN_PL
) "" $(INSTALLMANARGS
)
2161 -$(SHELL
) .
/installman.sh
uninstall $(DEST_MAN_PL_I
) "" $(INSTALLMANARGS
)
2162 -$(SHELL
) .
/installman.sh
uninstall $(DEST_MAN_PL_U
) "" $(INSTALLMANARGS
)
2163 -$(SHELL
) .
/installman.sh
uninstall $(DEST_MAN_RU
) "" $(INSTALLMANARGS
)
2164 -$(SHELL
) .
/installman.sh
uninstall $(DEST_MAN_RU_U
) "" $(INSTALLMANARGS
)
2165 -$(SHELL
) .
/installml.sh
uninstall "$(GUI_MAN_TARGETS)" \
2166 $(DEST_MAN
) $(INSTALLMLARGS
)
2167 -$(SHELL
) .
/installml.sh
uninstall "$(GUI_MAN_TARGETS)" \
2168 $(DEST_MAN_FR
) $(INSTALLMLARGS
)
2169 -$(SHELL
) .
/installml.sh
uninstall "$(GUI_MAN_TARGETS)" \
2170 $(DEST_MAN_FR_I
) $(INSTALLMLARGS
)
2171 -$(SHELL
) .
/installml.sh
uninstall "$(GUI_MAN_TARGETS)" \
2172 $(DEST_MAN_FR_U
) $(INSTALLMLARGS
)
2173 -$(SHELL
) .
/installml.sh
uninstall "$(GUI_MAN_TARGETS)" \
2174 $(DEST_MAN_IT
) $(INSTALLMLARGS
)
2175 -$(SHELL
) .
/installml.sh
uninstall "$(GUI_MAN_TARGETS)" \
2176 $(DEST_MAN_IT_I
) $(INSTALLMLARGS
)
2177 -$(SHELL
) .
/installml.sh
uninstall "$(GUI_MAN_TARGETS)" \
2178 $(DEST_MAN_IT_U
) $(INSTALLMLARGS
)
2179 -$(SHELL
) .
/installml.sh
uninstall "$(GUI_MAN_TARGETS)" \
2180 $(DEST_MAN_PL
) $(INSTALLMLARGS
)
2181 -$(SHELL
) .
/installml.sh
uninstall "$(GUI_MAN_TARGETS)" \
2182 $(DEST_MAN_PL_I
) $(INSTALLMLARGS
)
2183 -$(SHELL
) .
/installml.sh
uninstall "$(GUI_MAN_TARGETS)" \
2184 $(DEST_MAN_PL_U
) $(INSTALLMLARGS
)
2185 -$(SHELL
) .
/installml.sh
uninstall "$(GUI_MAN_TARGETS)" \
2186 $(DEST_MAN_RU
) $(INSTALLMLARGS
)
2187 -$(SHELL
) .
/installml.sh
uninstall "$(GUI_MAN_TARGETS)" \
2188 $(DEST_MAN_RU_U
) $(INSTALLMLARGS
)
2189 -rm -f
$(DEST_MAN
)/xxd
.1
2190 -rm -f
$(DEST_MAN_FR
)/xxd
.1 $(DEST_MAN_FR_I
)/xxd
.1 $(DEST_MAN_FR_U
)/xxd
.1
2191 -rm -f
$(DEST_MAN_IT
)/xxd
.1 $(DEST_MAN_IT_I
)/xxd
.1 $(DEST_MAN_IT_U
)/xxd
.1
2192 -rm -f
$(DEST_MAN_PL
)/xxd
.1 $(DEST_MAN_PL_I
)/xxd
.1 $(DEST_MAN_PL_U
)/xxd
.1
2193 -rm -f
$(DEST_MAN_RU
)/xxd
.1 $(DEST_MAN_RU_U
)/xxd
.1
2194 -rm -f
$(DEST_HELP
)/*.txt
$(DEST_HELP
)/tags $(DEST_HELP
)/*.pl
2195 -rm -f
$(DEST_HELP
)/*.??x
$(DEST_HELP
)/tags-??
2196 -rm -f
$(SYS_MENU_FILE
) $(SYS_SYNMENU_FILE
) $(SYS_DELMENU_FILE
)
2197 -rm -f
$(SYS_BUGR_FILE
) $(EVIM_FILE
) $(MSWIN_FILE
)
2198 -rm -f
$(DEST_SCRIPT
)/gvimrc_example.vim
$(DEST_SCRIPT
)/vimrc_example.vim
2199 -rm -f
$(SYS_FILETYPE_FILE
) $(SYS_FTOFF_FILE
) $(SYS_SCRIPTS_FILE
)
2200 -rm -f
$(SYS_INDOFF_FILE
) $(SYS_INDENT_FILE
)
2201 -rm -f
$(SYS_FTPLUGOF_FILE
) $(SYS_FTPLUGIN_FILE
)
2202 -rm -f
$(SYS_OPTWIN_FILE
)
2203 -rm -f
$(DEST_COL
)/*.vim
$(DEST_COL
)/README.txt
2204 -rm -f
$(DEST_SYN
)/*.vim
$(DEST_SYN
)/README.txt
2205 -rm -f
$(DEST_IND
)/*.vim
$(DEST_IND
)/README.txt
2206 -rm -rf
$(DEST_MACRO
)
2207 -rm -rf
$(DEST_TUTOR
)
2208 -rm -rf
$(DEST_SPELL
)
2209 -rm -rf
$(DEST_TOOLS
)
2210 -rm -rf
$(DEST_LANG
)
2211 -rm -rf
$(DEST_KMAP
)
2212 -rm -rf
$(DEST_COMP
)
2213 -rm -f
$(DEST_PRINT
)/*.ps
2214 -rmdir
$(DEST_HELP
) $(DEST_PRINT
) $(DEST_COL
) $(DEST_SYN
) $(DEST_IND
)
2215 -rm -rf
$(DEST_FTP
)/*.vim
$(DEST_FTP
)/README.txt
2216 -rm -f
$(DEST_AUTO
)/*.vim
$(DEST_AUTO
)/README.txt
$(DEST_AUTO
)/xml
/*.vim
2217 -rm -f
$(DEST_PLUG
)/*.vim
$(DEST_PLUG
)/README.txt
2218 -rmdir
$(DEST_FTP
) $(DEST_AUTO
)/xml
$(DEST_AUTO
) $(DEST_PLUG
) $(DEST_RT
)
2219 # This will fail when other Vim versions are installed, no worries.
2222 # Clean up all the files that have been produced, except configure's.
2223 # We support common typing mistakes for Juergen! :-)
2224 clean celan
: testclean
2225 -rm -f
*.o objects
/* core
$(VIMTARGET
).core
$(VIMTARGET
) vim xxd
/*.o
2226 -rm -f
$(TOOLS
) auto
/osdef.h auto
/pathdef.c auto
/if_perl.c
2227 -rm -f conftest
* *~ auto
/link.sed
2229 -rm -rf mzscheme_base.c
2230 if
test -d
$(PODIR
); then \
2231 cd
$(PODIR
); $(MAKE
) prefix=$(DESTDIR
)$(prefix) clean; \
2234 # Make a shadow directory for compilation on another system or with different
2238 shadow
: runtime pixmaps
2240 cd
$(SHADOWDIR
); ln
-s ..
/*.
[ch
] ..
/*.in ..
/*.sh ..
/*.xs ..
/*.xbm ..
/toolcheck ..
/proto ..
/po ..
/vimtutor ..
/gvimtutor ..
/mkinstalldirs .
2241 mkdir
$(SHADOWDIR
)/auto
2242 cd
$(SHADOWDIR
)/auto
; ln
-s ..
/..
/auto
/configure .
2243 cd
$(SHADOWDIR
); rm -f auto
/link.sed
2244 cp Makefile configure
$(SHADOWDIR
)
2245 rm -f
$(SHADOWDIR
)/auto
/config.mk
$(SHADOWDIR
)/config.mk.
dist
2246 cp config.mk.
dist $(SHADOWDIR
)/auto
/config.mk
2247 cp config.mk.
dist $(SHADOWDIR
)
2248 mkdir
$(SHADOWDIR
)/xxd
2249 cd
$(SHADOWDIR
)/xxd
; ln
-s ..
/..
/xxd
/*.
[ch
] ..
/..
/xxd
/Make
* .
2250 if
test -d
$(RSRC_DIR
); then \
2252 ln
-s ..
/infplist.xml .
; \
2253 ln
-s ..
/$(RSRC_DIR
) ..
/os_mac.rsr.hqx ..
/dehqx.py .
; \
2255 mkdir
$(SHADOWDIR
)/testdir
2256 cd
$(SHADOWDIR
)/testdir
; ln
-s ..
/..
/testdir
/Makefile \
2257 ..
/..
/testdir
/vimrc.unix \
2258 ..
/..
/testdir
/*.in \
2259 ..
/..
/testdir
/*.vim \
2260 ..
/..
/testdir
/*.ok .
2262 # Link needed for doing "make install" in a shadow directory.
2266 # Link needed for doing "make" using GTK in a shadow directory.
2270 # Update the synmenu.vim file with the latest Syntax menu.
2271 # This is only needed when runtime/makemenu.vim was changed.
2272 menu
: .
/vim ..
/runtime
/makemenu.vim
2273 .
/vim
-u ..
/runtime
/makemenu.vim
2275 # Start configure from scratch
2277 -rm -f auto
/config.status auto
/config.cache config.log auto
/config.log
2278 -rm -f auto
/config.h auto
/link.log auto
/link.sed auto
/config.mk
2280 cp config.mk.
dist auto
/config.mk
2282 distclean: clean scratch
2287 @echo Making the distribution has to be done in the top directory
2291 cp Makefile Makefile~
2292 sed
-e
'/\#\#\# Dependencies/q' < Makefile
> tmp_make
2293 @for i in
$(ALL_SRC
) ; do \
2295 echo
`echo "$$i" | sed -e 's/[^ ]*\.c$$/objects\/\1.o/'`": $$i" `\
2297 grep '^# .*"\./.*\.h"' |\
2298 sort -t'"' -u +1 -2 |\
2299 sed -e 's/.*"\.\/\(.*\)".*/\1/'\
2302 mv tmp_make Makefile
2306 cp Makefile Makefile~
2307 sed
-e
'/\#\#\# Dependencies/q' < Makefile
> tmp_make
2308 -for i in
$(ALL_SRC
); do echo
$$i; \
2309 $(CPP_DEPEND
) $$i | \
2310 sed
-e
's+^\([^ ]*\.o\)+objects/\1+' >> tmp_make
; done
2311 mv tmp_make Makefile
2313 # Run lint. Clean up the *.ln files that are sometimes left behind.
2315 $(LINT
) $(LINT_OPTIONS
) $(LINT_CFLAGS
) $(LINT_EXTRA
) $(LINT_SRC
)
2318 # Check dosinst.c with lint.
2320 $(LINT
) $(LINT_OPTIONS
) -DWIN32
-DUNIX_LINT dosinst.c
2323 ###########################################################################
2328 auto
/if_perl.c
: if_perl.xs
2329 $(PERL
) -e
'unless ( $$] >= 5.005 ) { for (qw(na defgv errgv)) { print "#define PL_$$_ $$_\n" }}' > $@
2330 $(PERL
) $(PERLLIB
)/ExtUtils
/xsubpp
-prototypes
-typemap \
2331 $(PERLLIB
)/ExtUtils
/typemap if_perl.xs
>> $@
2333 auto
/osdef.h
: auto
/config.h osdef.sh osdef1.h.in osdef2.h.in
2334 CC
="$(CC) $(OSDEF_CFLAGS)" srcdir=$(srcdir) sh
$(srcdir)/osdef.sh
2336 QUOTESED
= sed
-e
's/[\\"]/\\&/g' -e
's/\\"/"/' -e
's/\\";$$/";/'
2337 auto
/pathdef.c
: Makefile auto
/config.mk
2339 -@echo
'/* pathdef.c */' > $@
2340 -@echo
'/* This file is automatically created by Makefile' >> $@
2341 -@echo
' * DO NOT EDIT! Change Makefile only. */' >> $@
2342 -@echo
'#include "vim.h"' >> $@
2343 -@echo
'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' |
$(QUOTESED
) >> $@
2344 -@echo
'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' |
$(QUOTESED
) >> $@
2345 -@echo
'char_u *all_cflags = (char_u *)"$(CC) -c -I$(srcdir) $(ALL_CFLAGS)";' |
$(QUOTESED
) >> $@
2346 -@echo
'char_u *all_lflags = (char_u *)"$(CC) $(ALL_LIB_DIRS) $(LDFLAGS) -o $(VIMTARGET) $(ALL_LIBS) ";' |
$(QUOTESED
) >> $@
2347 -@echo
'char_u *compiled_user = (char_u *)"' | tr
-d
$(NL
) >> $@
2348 -@if
test -n
"$(COMPILEDBY)"; then \
2349 echo
"$(COMPILEDBY)" | tr
-d
$(NL
) >> $@
; \
2350 else ((logname
) 2>/dev
/null || whoami
) | tr
-d
$(NL
) >> $@
; fi
2352 -@echo
'char_u *compiled_sys = (char_u *)"' | tr
-d
$(NL
) >> $@
2353 -@if
test -z
"$(COMPILEDBY)"; then hostname | tr
-d
$(NL
) >> $@
; fi
2355 -@sh
$(srcdir)/pathdef.sh
2357 # All the object files are put in the "objects" directory. Since not all make
2358 # commands understand putting object files in another directory, it must be
2359 # specified for each file separately.
2364 objects
/buffer.o
: buffer.c
2365 $(CCC
) -o
$@ buffer.c
2367 objects
/charset.o
: charset.c
2368 $(CCC
) -o
$@ charset.c
2370 objects
/diff.o
: diff.c
2373 objects
/digraph.o
: digraph.c
2374 $(CCC
) -o
$@ digraph.c
2376 objects
/edit.o
: edit.c
2379 objects
/eval.o
: eval.c
2382 objects
/ex_cmds.o
: ex_cmds.c
2383 $(CCC
) -o
$@ ex_cmds.c
2385 objects
/ex_cmds2.o
: ex_cmds2.c
2386 $(CCC
) -o
$@ ex_cmds2.c
2388 objects
/ex_docmd.o
: ex_docmd.c
2389 $(CCC
) -o
$@ ex_docmd.c
2391 objects
/ex_eval.o
: ex_eval.c
2392 $(CCC
) -o
$@ ex_eval.c
2394 objects
/ex_getln.o
: ex_getln.c
2395 $(CCC
) -o
$@ ex_getln.c
2397 objects
/fileio.o
: fileio.c
2398 $(CCC
) -o
$@ fileio.c
2400 objects
/fold.o
: fold.c
2403 objects
/getchar.o
: getchar.c
2404 $(CCC
) -o
$@ getchar.c
2406 objects
/hardcopy.o
: hardcopy.c
2407 $(CCC
) -o
$@ hardcopy.c
2409 objects
/hashtab.o
: hashtab.c
2410 $(CCC
) -o
$@ hashtab.c
2412 objects
/gui.o
: gui.c
2415 objects
/gui_at_fs.o
: gui_at_fs.c
2416 $(CCC
) -o
$@ gui_at_fs.c
2418 objects
/gui_at_sb.o
: gui_at_sb.c
2419 $(CCC
) -o
$@ gui_at_sb.c
2421 objects
/gui_athena.o
: gui_athena.c
2422 $(CCC
) -o
$@ gui_athena.c
2424 objects
/gui_beval.o
: gui_beval.c
2425 $(CCC
) -o
$@ gui_beval.c
2427 objects
/gui_gtk.o
: gui_gtk.c
2428 $(CCC
) -o
$@ gui_gtk.c
2430 objects
/gui_gtk_f.o
: gui_gtk_f.c
2431 $(CCC
) -o
$@ gui_gtk_f.c
2433 objects
/gui_gtk_x11.o
: gui_gtk_x11.c
2434 $(CCC
) -o
$@ gui_gtk_x11.c
2436 objects
/gui_motif.o
: gui_motif.c
2437 $(CCC
) -o
$@ gui_motif.c
2439 objects
/gui_xmdlg.o
: gui_xmdlg.c
2440 $(CCC
) -o
$@ gui_xmdlg.c
2442 objects
/gui_xmebw.o
: gui_xmebw.c
2443 $(CCC
) -o
$@ gui_xmebw.c
2445 objects
/gui_x11.o
: gui_x11.c
2446 $(CCC
) -o
$@ gui_x11.c
2448 objects
/gui_photon.o
: gui_photon.c
2449 $(CCC
) -o
$@ gui_photon.c
2451 objects
/gui_mac.o
: gui_mac.c
2452 $(CCC
) -o
$@ gui_mac.c
2454 objects
/hangulin.o
: hangulin.c
2455 $(CCC
) -o
$@ hangulin.c
2457 objects
/if_cscope.o
: if_cscope.c
2458 $(CCC
) -o
$@ if_cscope.c
2460 objects
/if_xcmdsrv.o
: if_xcmdsrv.c
2461 $(CCC
) -o
$@ if_xcmdsrv.c
2463 objects
/if_lua.o
: if_lua.c
2464 $(CCC
) -o
$@ if_lua.c
2466 objects
/if_mzsch.o
: if_mzsch.c
$(MZSCHEME_EXTRA
)
2467 $(CCC
) -o
$@
$(MZSCHEME_CFLAGS_EXTRA
) if_mzsch.c
2470 $(MZSCHEME_MZC
) --c-mods mzscheme_base.c
++lib scheme
/base
2472 objects
/if_perl.o
: auto
/if_perl.c
2473 $(CCC
) -o
$@ auto
/if_perl.c
2475 objects
/if_perlsfio.o
: if_perlsfio.c
2476 $(CCC
) -o
$@ if_perlsfio.c
2478 objects
/if_ecl.o
: if_ecl.c
2479 $(CCC
) -o
$@ if_ecl.c
2481 objects
/if_python.o
: if_python.c
2482 $(CCC
) -o
$@
$(PYTHON_CFLAGS_EXTRA
) if_python.c
2484 objects
/if_ruby.o
: if_ruby.c
2485 $(CCC
) -o
$@ if_ruby.c
2487 objects
/if_sniff.o
: if_sniff.c
2488 $(CCC
) -o
$@ if_sniff.c
2490 objects
/if_tcl.o
: if_tcl.c
2491 $(CCC
) -o
$@ if_tcl.c
2493 objects
/integration.o
: integration.c
2494 $(CCC
) -o
$@ integration.c
2496 objects
/main.o
: main.c
2499 objects
/mark.o
: mark.c
2502 objects
/memfile.o
: memfile.c
2503 $(CCC
) -o
$@ memfile.c
2505 objects
/memline.o
: memline.c
2506 $(CCC
) -o
$@ memline.c
2508 objects
/menu.o
: menu.c
2511 objects
/message.o
: message.c
2512 $(CCC
) -o
$@ message.c
2514 objects
/misc1.o
: misc1.c
2515 $(CCC
) -o
$@ misc1.c
2517 objects
/misc2.o
: misc2.c
2518 $(CCC
) -o
$@ misc2.c
2520 objects
/move.o
: move.c
2523 objects
/mbyte.o
: mbyte.c
2524 $(CCC
) -o
$@ mbyte.c
2526 objects
/normal.o
: normal.c
2527 $(CCC
) -o
$@ normal.c
2529 objects
/ops.o
: ops.c
2532 objects
/option.o
: option.c
2533 $(CCC
) -o
$@ option.c
2535 objects
/os_beos.o
: os_beos.c
2536 $(CCC
) -o
$@ os_beos.c
2538 objects
/os_qnx.o
: os_qnx.c
2539 $(CCC
) -o
$@ os_qnx.c
2541 objects
/os_macosx.o
: os_macosx.c
2542 $(CCC
) -o
$@ os_macosx.c
2544 objects
/os_mac_conv.o
: os_mac_conv.c
2545 $(CCC
) -o
$@ os_mac_conv.c
2547 objects
/os_unix.o
: os_unix.c
2548 $(CCC
) -o
$@ os_unix.c
2550 objects
/pathdef.o
: auto
/pathdef.c
2551 $(CCC
) -o
$@ auto
/pathdef.c
2553 objects
/py_config.o
: $(PYTHON_CONFDIR
)/config.c
2554 $(CCC
) -o
$@
$(PYTHON_CONFDIR
)/config.c \
2555 -I
$(PYTHON_CONFDIR
) -DHAVE_CONFIG_H
-DNO_MAIN
2557 objects
/py_getpath.o
: $(PYTHON_CONFDIR
)/getpath.c
2558 $(CCC
) -o
$@
$(PYTHON_CONFDIR
)/getpath.c \
2559 -I
$(PYTHON_CONFDIR
) -DHAVE_CONFIG_H
-DNO_MAIN \
2560 $(PYTHON_GETPATH_CFLAGS
)
2562 objects
/pty.o
: pty.c
2565 objects
/popupmnu.o
: popupmnu.c
2566 $(CCC
) -o
$@ popupmnu.c
2568 objects
/quickfix.o
: quickfix.c
2569 $(CCC
) -o
$@ quickfix.c
2571 objects
/regexp.o
: regexp.c
2572 $(CCC
) -o
$@ regexp.c
2574 objects
/screen.o
: screen.c
2575 $(CCC
) -o
$@ screen.c
2577 objects
/search.o
: search.c
2578 $(CCC
) -o
$@ search.c
2580 objects
/spell.o
: spell.c
2581 $(CCC
) -o
$@ spell.c
2583 objects
/syntax.o
: syntax.c
2584 $(CCC
) -o
$@ syntax.c
2586 objects
/tag.o
: tag.c
2589 objects
/term.o
: term.c
2595 objects
/undo.o
: undo.c
2598 objects
/window.o
: window.c
2599 $(CCC
) -o
$@ window.c
2601 objects
/workshop.o
: workshop.c
2602 $(CCC
) -o
$@ workshop.c
2604 objects
/wsdebug.o
: wsdebug.c
2605 $(CCC
) -o
$@ wsdebug.c
2607 objects
/netbeans.o
: netbeans.c
2608 $(CCC
) -o
$@ netbeans.c
2611 @echo The name of the makefile MUST be
"Makefile" (with capital M
)!!!!
2613 ###############################################################################
2614 ### MacOS X installation
2616 ### This installs a runnable Vim.app in $(prefix)
2618 REZ
= /Developer
/Tools
/Rez
2619 RESDIR
= $(APPDIR
)/Contents
/Resources
2620 VERSION
= $(VIMMAJOR
).
$(VIMMINOR
)
2623 M4FLAGSX
= $(M4FLAGS
) -DAPP_EXE
=$(VIMNAME
) -DAPP_NAME
=$(VIMNAME
) \
2624 -DAPP_VER
=$(VERSION
)
2626 install_macosx
: gui_bundle
2627 # Remove the link to the runtime dir, don't want to copy all of that.
2628 -rm $(RESDIR
)/vim
/runtime
2629 $(INSTALL_DATA_R
) $(APPDIR
) $(DESTDIR
)$(prefix)
2630 # Generate the help tags file now, it won't work with "make installruntime".
2631 -@
srcdir=`pwd`; cd
$(HELPSOURCE
); $(MAKE
) VIMEXE
=$$srcdir/$(VIMTARGET
) vimtags
2632 # Install the runtime files. Recursive!
2633 -mkdir
-p
$(DESTDIR
)$(prefix)/$(RESDIR
)/vim
/runtime
2634 # -mkdir $(DESTDIR)$(prefix)/$(APPDIR)/bin
2635 srcdir=`pwd`; $(MAKE
) -f Makefile installruntime \
2636 VIMEXE
=$$srcdir/$(VIMTARGET
) \
2637 prefix=$(DESTDIR
)$(prefix)/$(RESDIR
)$(VIMDIR
) \
2638 exec_prefix=$(DESTDIR
)$(prefix)/$(APPDIR
)/Contents \
2639 BINDIR
=$(DESTDIR
)$(prefix)/$(APPDIR
)/Contents
/MacOS \
2640 VIMLOC
=$(DESTDIR
)$(prefix)/$(RESDIR
)$(VIMDIR
) \
2641 VIMRTLOC
=$(DESTDIR
)$(prefix)/$(RESDIR
)$(VIMDIR
)/runtime
2642 # Put the link back.
2643 ln
-s
`pwd`/..
/runtime
$(RESDIR
)/vim
2644 # Copy rgb.txt, Mac doesn't always have X11
2645 $(INSTALL_DATA
) $(SCRIPTSOURCE
)/rgb.txt
$(DESTDIR
)$(prefix)/$(RESDIR
)/vim
/runtime
2646 # TODO: Create the vimtutor and/or gvimtutor application.
2648 gui_bundle
: $(RESDIR
) bundle-dir bundle-executable bundle-info bundle-resource \
2654 bundle-dir
: $(APPDIR
)/Contents
$(VIMTARGET
)
2655 # Make a link to the runtime directory, so that we can try out the executable
2656 # without installing it.
2657 mkdir
-p
$(RESDIR
)/vim
2658 -ln
-s
`pwd`/..
/runtime
$(RESDIR
)/vim
2660 bundle-executable
: $(VIMTARGET
)
2661 mkdir
-p
$(APPDIR
)/Contents
/MacOS
2662 cp
$(VIMTARGET
) $(APPDIR
)/Contents
/MacOS
/$(VIMTARGET
)
2664 bundle-info
: bundle-dir
2665 @echo
"Creating PkgInfo"
2666 @echo
-n
"APPLVIM!" > $(APPDIR
)/Contents
/PkgInfo
2667 @echo
"Creating Info.plist"
2668 m4
$(M4FLAGSX
) infplist.xml
> $(APPDIR
)/Contents
/Info.plist
2670 bundle-resource
: bundle-dir bundle-rsrc
2671 cp
-f
$(RSRC_DIR
)/*.icns
$(RESDIR
)
2673 ### Classic resources
2674 # Resource fork (in the form of a .rsrc file) for Classic Vim (Mac OS 9)
2675 # This file is also required for OS X Vim.
2676 bundle-rsrc
: os_mac.rsr.hqx
2677 @echo
"Creating resource fork"
2680 mv gui_mac.rsrc.rsrcfork
$(RESDIR
)/$(VIMNAME
).rsrc
2682 # po/Make_osx.pl says something about generating a Mac message file
2683 # for Ukrananian. Would somebody using Mac OS X in Ukranian
2684 # *really* be upset that Carbon Vim was not localised in
2687 #bundle-language: bundle-dir po/Make_osx.pl
2688 # cd po && perl Make_osx.pl --outdir ../$(RESDIR) $(MULTILANG)
2689 bundle-language
: bundle-dir
2692 -$(SHELL
) .
/mkinstalldirs
$(APPDIR
)/Contents
/MacOS
2693 -$(SHELL
) .
/mkinstalldirs
$(RESDIR
)/English.lproj
2696 ###############################################################################
2697 ### (automatically generated by 'make depend')
2699 objects
/buffer.o
: buffer.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2700 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2701 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2703 objects
/charset.o
: charset.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2704 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2705 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2707 objects
/diff.o
: diff.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2708 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2709 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2711 objects
/digraph.o
: digraph.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2712 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2713 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2715 objects
/edit.o
: edit.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2716 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2717 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2719 objects
/eval.o
: eval.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2720 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2721 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2723 objects
/ex_cmds.o
: ex_cmds.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2724 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2725 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2727 objects
/ex_cmds2.o
: ex_cmds2.c vim.h auto
/config.h feature.h os_unix.h \
2728 auto
/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2729 regexp.h gui.h gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h \
2730 globals.h farsi.h arabic.h version.h
2731 objects
/ex_docmd.o
: ex_docmd.c vim.h auto
/config.h feature.h os_unix.h \
2732 auto
/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2733 regexp.h gui.h gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h \
2734 globals.h farsi.h arabic.h
2735 objects
/ex_eval.o
: ex_eval.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2736 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2737 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2739 objects
/ex_getln.o
: ex_getln.c vim.h auto
/config.h feature.h os_unix.h \
2740 auto
/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2741 regexp.h gui.h gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h \
2742 globals.h farsi.h arabic.h
2743 objects
/fileio.o
: fileio.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2744 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2745 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2747 objects
/fold.o
: fold.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2748 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2749 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2751 objects
/getchar.o
: getchar.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2752 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2753 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2755 objects
/hardcopy.o
: hardcopy.c vim.h auto
/config.h feature.h os_unix.h \
2756 auto
/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2757 regexp.h gui.h gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h \
2758 globals.h farsi.h arabic.h version.h
2759 objects
/hashtab.o
: hashtab.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2760 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2761 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2763 objects
/if_cscope.o
: if_cscope.c vim.h auto
/config.h feature.h os_unix.h \
2764 auto
/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2765 regexp.h gui.h gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h \
2766 globals.h farsi.h arabic.h if_cscope.h
2767 objects
/if_xcmdsrv.o
: if_xcmdsrv.c vim.h auto
/config.h feature.h os_unix.h \
2768 auto
/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2769 regexp.h gui.h gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h \
2770 globals.h farsi.h arabic.h version.h
2771 objects
/main.o
: main.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2772 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2773 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2774 arabic.h farsi.c arabic.c
2775 objects
/mark.o
: mark.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2776 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2777 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2779 objects
/memfile.o
: memfile.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2780 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2781 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2783 objects
/memline.o
: memline.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2784 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2785 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2787 objects
/menu.o
: menu.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2788 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2789 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2791 objects
/message.o
: message.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2792 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2793 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2795 objects
/misc1.o
: misc1.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2796 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2797 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2799 objects
/misc2.o
: misc2.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2800 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2801 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2803 objects
/move.o
: move.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2804 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2805 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2807 objects
/mbyte.o
: mbyte.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2808 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2809 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2811 objects
/normal.o
: normal.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2812 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2813 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2815 objects
/ops.o
: ops.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h ascii.h \
2816 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
2817 proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
2818 objects
/option.o
: option.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2819 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2820 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2822 objects
/os_unix.o
: os_unix.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2823 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2824 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2826 objects
/pathdef.o
: auto
/pathdef.c .
/vim.h .
/auto
/config.h .
/feature.h .
/os_unix.h \
2827 .
/auto
/osdef.h .
/ascii.h .
/keymap.h .
/term.h .
/macros.h .
/option.h \
2828 .
/structs.h .
/regexp.h .
/gui.h .
/gui_beval.h proto
/gui_beval.pro \
2829 .
/ex_cmds.h .
/proto.h .
/globals.h .
/farsi.h .
/arabic.h
2830 objects
/popupmnu.o
: popupmnu.c vim.h auto
/config.h feature.h os_unix.h \
2831 auto
/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2832 regexp.h gui.h gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h \
2833 globals.h farsi.h arabic.h
2834 objects
/quickfix.o
: quickfix.c vim.h auto
/config.h feature.h os_unix.h \
2835 auto
/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2836 regexp.h gui.h gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h \
2837 globals.h farsi.h arabic.h
2838 objects
/regexp.o
: regexp.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2839 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2840 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2842 objects
/screen.o
: screen.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2843 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2844 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2846 objects
/search.o
: search.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2847 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2848 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2850 objects
/spell.o
: spell.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2851 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2852 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2854 objects
/syntax.o
: syntax.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2855 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2856 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2858 objects
/tag.o
: tag.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h ascii.h \
2859 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
2860 proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
2861 objects
/term.o
: term.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2862 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2863 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2865 objects
/ui.o
: ui.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h ascii.h \
2866 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
2867 proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
2868 objects
/undo.o
: undo.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2869 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2870 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2872 objects
/version.o
: version.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2873 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2874 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2876 objects
/window.o
: window.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2877 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2878 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2880 objects
/gui.o
: gui.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h ascii.h \
2881 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
2882 proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
2883 objects
/gui_gtk.o
: gui_gtk.c gui_gtk_f.h vim.h auto
/config.h feature.h os_unix.h \
2884 auto
/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2885 regexp.h gui.h gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h \
2886 globals.h farsi.h arabic.h ..
/pixmaps
/stock_icons.h
2887 objects
/gui_gtk_f.o
: gui_gtk_f.c vim.h auto
/config.h feature.h os_unix.h \
2888 auto
/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2889 regexp.h gui.h gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h \
2890 globals.h farsi.h arabic.h gui_gtk_f.h
2891 objects
/gui_motif.o
: gui_motif.c vim.h auto
/config.h feature.h os_unix.h \
2892 auto
/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2893 regexp.h gui.h gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h \
2894 globals.h farsi.h arabic.h gui_xmebw.h ..
/pixmaps
/alert.xpm \
2895 ..
/pixmaps
/error.xpm ..
/pixmaps
/generic.xpm ..
/pixmaps
/info.xpm \
2896 ..
/pixmaps
/quest.xpm gui_x11_pm.h ..
/pixmaps
/tb_new.xpm \
2897 ..
/pixmaps
/tb_open.xpm ..
/pixmaps
/tb_close.xpm ..
/pixmaps
/tb_save.xpm \
2898 ..
/pixmaps
/tb_print.xpm ..
/pixmaps
/tb_cut.xpm ..
/pixmaps
/tb_copy.xpm \
2899 ..
/pixmaps
/tb_paste.xpm ..
/pixmaps
/tb_find.xpm \
2900 ..
/pixmaps
/tb_find_next.xpm ..
/pixmaps
/tb_find_prev.xpm \
2901 ..
/pixmaps
/tb_find_help.xpm ..
/pixmaps
/tb_exit.xpm \
2902 ..
/pixmaps
/tb_undo.xpm ..
/pixmaps
/tb_redo.xpm ..
/pixmaps
/tb_help.xpm \
2903 ..
/pixmaps
/tb_macro.xpm ..
/pixmaps
/tb_make.xpm \
2904 ..
/pixmaps
/tb_save_all.xpm ..
/pixmaps
/tb_jump.xpm \
2905 ..
/pixmaps
/tb_ctags.xpm ..
/pixmaps
/tb_load_session.xpm \
2906 ..
/pixmaps
/tb_save_session.xpm ..
/pixmaps
/tb_new_session.xpm \
2907 ..
/pixmaps
/tb_blank.xpm ..
/pixmaps
/tb_maximize.xpm \
2908 ..
/pixmaps
/tb_split.xpm ..
/pixmaps
/tb_minimize.xpm \
2909 ..
/pixmaps
/tb_shell.xpm ..
/pixmaps
/tb_replace.xpm \
2910 ..
/pixmaps
/tb_vsplit.xpm ..
/pixmaps
/tb_maxwidth.xpm \
2911 ..
/pixmaps
/tb_minwidth.xpm
2912 objects
/gui_xmdlg.o
: gui_xmdlg.c vim.h auto
/config.h feature.h os_unix.h \
2913 auto
/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2914 regexp.h gui.h gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h \
2915 globals.h farsi.h arabic.h
2916 objects
/gui_xmebw.o
: gui_xmebw.c vim.h auto
/config.h feature.h os_unix.h \
2917 auto
/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2918 regexp.h gui.h gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h \
2919 globals.h farsi.h arabic.h gui_xmebwp.h gui_xmebw.h
2920 objects
/gui_athena.o
: gui_athena.c vim.h auto
/config.h feature.h os_unix.h \
2921 auto
/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2922 regexp.h gui.h gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h \
2923 globals.h farsi.h arabic.h gui_at_sb.h gui_x11_pm.h \
2924 ..
/pixmaps
/tb_new.xpm ..
/pixmaps
/tb_open.xpm ..
/pixmaps
/tb_close.xpm \
2925 ..
/pixmaps
/tb_save.xpm ..
/pixmaps
/tb_print.xpm ..
/pixmaps
/tb_cut.xpm \
2926 ..
/pixmaps
/tb_copy.xpm ..
/pixmaps
/tb_paste.xpm ..
/pixmaps
/tb_find.xpm \
2927 ..
/pixmaps
/tb_find_next.xpm ..
/pixmaps
/tb_find_prev.xpm \
2928 ..
/pixmaps
/tb_find_help.xpm ..
/pixmaps
/tb_exit.xpm \
2929 ..
/pixmaps
/tb_undo.xpm ..
/pixmaps
/tb_redo.xpm ..
/pixmaps
/tb_help.xpm \
2930 ..
/pixmaps
/tb_macro.xpm ..
/pixmaps
/tb_make.xpm \
2931 ..
/pixmaps
/tb_save_all.xpm ..
/pixmaps
/tb_jump.xpm \
2932 ..
/pixmaps
/tb_ctags.xpm ..
/pixmaps
/tb_load_session.xpm \
2933 ..
/pixmaps
/tb_save_session.xpm ..
/pixmaps
/tb_new_session.xpm \
2934 ..
/pixmaps
/tb_blank.xpm ..
/pixmaps
/tb_maximize.xpm \
2935 ..
/pixmaps
/tb_split.xpm ..
/pixmaps
/tb_minimize.xpm \
2936 ..
/pixmaps
/tb_shell.xpm ..
/pixmaps
/tb_replace.xpm \
2937 ..
/pixmaps
/tb_vsplit.xpm ..
/pixmaps
/tb_maxwidth.xpm \
2938 ..
/pixmaps
/tb_minwidth.xpm
2939 objects
/gui_gtk_x11.o
: gui_gtk_x11.c vim.h auto
/config.h feature.h os_unix.h \
2940 auto
/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2941 regexp.h gui.h gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h \
2942 globals.h farsi.h arabic.h gui_gtk_f.h ..
/runtime
/vim32x32.xpm \
2943 ..
/runtime
/vim16x16.xpm ..
/runtime
/vim48x48.xpm
2944 objects
/gui_x11.o
: gui_x11.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2945 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2946 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2947 arabic.h ..
/runtime
/vim32x32.xpm ..
/runtime
/vim16x16.xpm \
2948 ..
/runtime
/vim48x48.xpm
2949 objects
/gui_at_sb.o
: gui_at_sb.c vim.h auto
/config.h feature.h os_unix.h \
2950 auto
/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2951 regexp.h gui.h gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h \
2952 globals.h farsi.h arabic.h gui_at_sb.h
2953 objects
/gui_at_fs.o
: gui_at_fs.c vim.h auto
/config.h feature.h os_unix.h \
2954 auto
/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2955 regexp.h gui.h gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h \
2956 globals.h farsi.h arabic.h gui_at_sb.h
2957 objects
/pty.o
: pty.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h ascii.h \
2958 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
2959 proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
2960 objects
/hangulin.o
: hangulin.c vim.h auto
/config.h feature.h os_unix.h \
2961 auto
/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2962 regexp.h gui.h gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h \
2963 globals.h farsi.h arabic.h
2964 objects
/if_lua.o
: if_lua.c vim.h auto
/config.h feature.h os_unix.h \
2965 auto
/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2966 regexp.h gui.h gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h \
2967 globals.h farsi.h arabic.h
2968 objects
/if_mzsch.o
: if_mzsch.c vim.h auto
/config.h feature.h os_unix.h \
2969 auto
/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2970 regexp.h gui.h gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h \
2971 globals.h farsi.h arabic.h if_mzsch.h
2972 objects
/if_perl.o
: auto
/if_perl.c .
/vim.h .
/auto
/config.h .
/feature.h .
/os_unix.h \
2973 .
/auto
/osdef.h .
/ascii.h .
/keymap.h .
/term.h .
/macros.h .
/option.h \
2974 .
/structs.h .
/regexp.h .
/gui.h .
/gui_beval.h proto
/gui_beval.pro \
2975 .
/ex_cmds.h .
/proto.h .
/globals.h .
/farsi.h .
/arabic.h
2976 objects
/if_perlsfio.o
: if_perlsfio.c vim.h auto
/config.h feature.h os_unix.h \
2977 auto
/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2978 regexp.h gui.h gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h \
2979 globals.h farsi.h arabic.h
2980 objects
/if_python.o
: if_python.c vim.h auto
/config.h feature.h os_unix.h \
2981 auto
/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2982 regexp.h gui.h gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h \
2983 globals.h farsi.h arabic.h
2984 objects
/if_tcl.o
: if_tcl.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2985 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2986 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2988 objects
/if_ruby.o
: if_ruby.c vim.h auto
/config.h feature.h os_unix.h auto
/osdef.h \
2989 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2990 gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2992 objects
/if_sniff.o
: if_sniff.c vim.h auto
/config.h feature.h os_unix.h \
2993 auto
/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2994 regexp.h gui.h gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h \
2995 globals.h farsi.h arabic.h os_unixx.h
2996 objects
/gui_beval.o
: gui_beval.c vim.h auto
/config.h feature.h os_unix.h \
2997 auto
/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2998 regexp.h gui.h gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h \
2999 globals.h farsi.h arabic.h
3000 objects
/workshop.o
: workshop.c auto
/config.h integration.h vim.h feature.h \
3001 os_unix.h auto
/osdef.h ascii.h keymap.h term.h macros.h option.h \
3002 structs.h regexp.h gui.h gui_beval.h proto
/gui_beval.pro ex_cmds.h \
3003 proto.h globals.h farsi.h arabic.h version.h workshop.h
3004 objects
/wsdebug.o
: wsdebug.c
3005 objects
/integration.o
: integration.c vim.h auto
/config.h feature.h os_unix.h \
3006 auto
/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
3007 regexp.h gui.h gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h \
3008 globals.h farsi.h arabic.h integration.h
3009 objects
/netbeans.o
: netbeans.c vim.h auto
/config.h feature.h os_unix.h \
3010 auto
/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
3011 regexp.h gui.h gui_beval.h proto
/gui_beval.pro ex_cmds.h proto.h \
3012 globals.h farsi.h arabic.h version.h