9348 mii: duplicate 'const' declaration specifier

[unleashed.git] / usr / src / uts / common / io / power.c

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 * Copyright 2011 Joyent, Inc.  All rights reserved.
 * Copyright 2011 Nexenta Systems, Inc.  All rights reserved.
 */

/*
 *      Power Button Driver
 *
 *      This driver handles interrupt generated by the power button on
 *      platforms with "power" device node which has "button" property.
 *      Currently, these platforms are:
 *
 *              ACPI-enabled x86/x64 platforms
 *              Ultra-5_10, Ultra-80, Sun-Blade-100, Sun-Blade-150,
 *              Sun-Blade-1500, Sun-Blade-2500,
 *              Sun-Fire-V210, Sun-Fire-V240, Netra-240
 *
 *      Only one instance is allowed to attach.  In order to know when
 *      an application that has opened the device is going away, a new
 *      minor clone is created for each open(9E) request.  There are
 *      allocations for creating minor clones between 1 and 255.  The ioctl
 *      interface is defined by pbio(7I) and approved as part of
 *      PSARC/1999/393 case.
 */

#include <sys/types.h>
#include <sys/conf.h>
#include <sys/ddi.h>
#include <sys/sunddi.h>
#include <sys/ddi_impldefs.h>
#include <sys/cmn_err.h>
#include <sys/errno.h>
#include <sys/modctl.h>
#include <sys/open.h>
#include <sys/stat.h>
#include <sys/poll.h>
#include <sys/pbio.h>
#include <sys/sysevent/eventdefs.h>
#include <sys/sysevent/pwrctl.h>

#if defined(__sparc)
#include <sys/machsystm.h>
#endif

#ifdef  ACPI_POWER_BUTTON

#include <sys/acpi/acpi.h>
#include <sys/acpica.h>

#else

#include <sys/epic.h>
/*
 * Some #defs that must be here as they differ for power.c
 * and epic.c
 */
#define EPIC_REGS_OFFSET        0x00
#define EPIC_REGS_LEN           0x82


/*
 * This flag, which is set for platforms,  that have EPIC processor
 * to process power button interrupt, helps in executing platform
 * specific code.
 */
static char     hasEPIC = B_FALSE;
#endif  /* ACPI_POWER_BUTTON */

/*
 * Maximum number of clone minors that is allowed.  This value
 * is defined relatively low to save memory.
 */
#define POWER_MAX_CLONE 256

/*
 * Minor number is instance << 8 + clone minor from range 1-255; clone 0
 * is reserved for "original" minor.
 */
#define POWER_MINOR_TO_CLONE(minor) ((minor) & (POWER_MAX_CLONE - 1))

/*
 * Power Button Abort Delay
 */
#define ABORT_INCREMENT_DELAY   10

/*
 * FWARC 2005/687: power device compatible property
 */
#define POWER_DEVICE_TYPE "power-device-type"

/*
 * Driver global variables
 */
static void *power_state;
static int power_inst = -1;

static hrtime_t power_button_debounce = MSEC2NSEC(10);
static hrtime_t power_button_abort_interval = 1.5 * NANOSEC;
static int      power_button_abort_presses = 3;
static int      power_button_abort_enable = 1;
static int      power_button_enable = 1;

static int      power_button_pressed = 0;
static int      power_button_cancel = 0;
static int      power_button_timeouts = 0;
static int      timeout_cancel = 0;
static int      additional_presses = 0;

/*
 * Function prototypes
 */
static int power_attach(dev_info_t *, ddi_attach_cmd_t);
static int power_detach(dev_info_t *, ddi_detach_cmd_t);
static int power_getinfo(dev_info_t *, ddi_info_cmd_t, void *, void **);
static int power_open(dev_t *, int, int, cred_t *);
static int power_close(dev_t, int, int, cred_t *);
static int power_ioctl(dev_t, int, intptr_t, int, cred_t *, int *);
static int power_chpoll(dev_t, short, int, short *, struct pollhead **);
#ifndef ACPI_POWER_BUTTON
static uint_t power_high_intr(caddr_t);
#endif
static uint_t power_soft_intr(caddr_t);
static uint_t power_issue_shutdown(caddr_t);
static void power_timeout(caddr_t);
static void power_log_message(void);

/*
 * Structure used in the driver
 */
struct power_soft_state {
        dev_info_t      *dip;           /* device info pointer */
        kmutex_t        power_mutex;    /* mutex lock */
        kmutex_t        power_intr_mutex; /* interrupt mutex lock */
        ddi_iblock_cookie_t soft_iblock_cookie; /* holds interrupt cookie */
        ddi_iblock_cookie_t high_iblock_cookie; /* holds interrupt cookie */
        ddi_softintr_t  softintr_id;    /* soft interrupt id */
        uchar_t         clones[POWER_MAX_CLONE]; /* array of minor clones */
        int             monitor_on;     /* clone monitoring the button event */
                                        /* clone 0 indicates no one is */
                                        /* monitoring the button event */
        pollhead_t      pollhd;         /* poll head struct */
        int             events;         /* bit map of occured events */
        int             shutdown_pending; /* system shutdown in progress */
#ifdef  ACPI_POWER_BUTTON
        boolean_t       fixed_attached; /* true means fixed is attached */
        boolean_t       gpe_attached;   /* true means GPE is attached */
        ACPI_HANDLE     button_obj;     /* handle to device power button */
#else
        ddi_acc_handle_t power_rhandle; /* power button register handle */
        uint8_t         *power_btn_reg; /* power button register address */
        uint8_t         power_btn_bit;  /* power button register bit */
        boolean_t       power_regs_mapped; /* flag to tell if regs mapped */
        boolean_t       power_btn_ioctl; /* flag to specify ioctl request */
#endif
};

static void power_gen_sysevent(struct power_soft_state *);

#ifdef  ACPI_POWER_BUTTON
static int power_attach_acpi(struct power_soft_state *softsp);
static void power_detach_acpi(struct power_soft_state *softsp);
static UINT32 power_acpi_fixed_event(void *ctx);
#else
static int power_setup_regs(struct power_soft_state *softsp);
static void power_free_regs(struct power_soft_state *softsp);
#endif  /* ACPI_POWER_BUTTON */

/*
 * Configuration data structures
 */
static struct cb_ops power_cb_ops = {
        power_open,             /* open */
        power_close,            /* close */
        nodev,                  /* strategy */
        nodev,                  /* print */
        nodev,                  /* dump */
        nodev,                  /* read */
        nodev,                  /* write */
        power_ioctl,            /* ioctl */
        nodev,                  /* devmap */
        nodev,                  /* mmap */
        nodev,                  /* segmap */
        power_chpoll,           /* poll */
        ddi_prop_op,            /* cb_prop_op */
        NULL,                   /* streamtab */
        D_MP | D_NEW,           /* Driver compatibility flag */
        CB_REV,                 /* rev */
        nodev,                  /* cb_aread */
        nodev                   /* cb_awrite */
};

static struct dev_ops power_ops = {
        DEVO_REV,               /* devo_rev, */
        0,                      /* refcnt */
        power_getinfo,          /* getinfo */
        nulldev,                /* identify */
        nulldev,                /* probe */
        power_attach,           /* attach */
        power_detach,           /* detach */
        nodev,                  /* reset */
        &power_cb_ops,          /* cb_ops */
        (struct bus_ops *)NULL, /* bus_ops */
        NULL,                   /* power */
        ddi_quiesce_not_supported,      /* devo_quiesce */
};

static struct modldrv modldrv = {
        &mod_driverops,         /* Type of module.  This one is a driver */
        "power button driver",  /* name of module */
        &power_ops,             /* driver ops */
};

static struct modlinkage modlinkage = {
        MODREV_1,
        (void *)&modldrv,
        NULL
};

/*
 * These are the module initialization routines.
 */

int
_init(void)
{
        int error;

        if ((error = ddi_soft_state_init(&power_state,
            sizeof (struct power_soft_state), 0)) != 0)
                return (error);

        if ((error = mod_install(&modlinkage)) != 0)
                ddi_soft_state_fini(&power_state);

        return (error);
}

int
_fini(void)
{
        int error;

        if ((error = mod_remove(&modlinkage)) == 0)
                ddi_soft_state_fini(&power_state);

        return (error);
}

int
_info(struct modinfo *modinfop)
{
        return (mod_info(&modlinkage, modinfop));
}

/*ARGSUSED*/
static int
power_getinfo(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg,
    void **result)
{
        struct power_soft_state *softsp;

        if (power_inst == -1)
                return (DDI_FAILURE);

        switch (infocmd) {
        case DDI_INFO_DEVT2DEVINFO:
                if ((softsp = ddi_get_soft_state(power_state, power_inst))
                    == NULL)
                        return (DDI_FAILURE);
                *result = (void *)softsp->dip;
                return (DDI_SUCCESS);

        case DDI_INFO_DEVT2INSTANCE:
                *result = (void *)(uintptr_t)power_inst;
                return (DDI_SUCCESS);

        default:
                return (DDI_FAILURE);
        }
}

static int
power_attach(dev_info_t *dip, ddi_attach_cmd_t cmd)
{
        struct power_soft_state *softsp;

        switch (cmd) {
        case DDI_ATTACH:
                break;
        case DDI_RESUME:
                return (DDI_SUCCESS);
        default:
                return (DDI_FAILURE);
        }

        /*
         * If the power node doesn't have "button" property, quietly
         * fail to attach.
         */
        if (ddi_prop_exists(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
            "button") == 0)
                return (DDI_FAILURE);

        if (power_inst != -1)
                return (DDI_FAILURE);

        power_inst = ddi_get_instance(dip);

        if (ddi_soft_state_zalloc(power_state, power_inst) != DDI_SUCCESS)
                return (DDI_FAILURE);

        if (ddi_create_minor_node(dip, "power_button", S_IFCHR,
            (power_inst << 8) + 0, "ddi_power_button", 0) != DDI_SUCCESS)
                return (DDI_FAILURE);

        softsp = ddi_get_soft_state(power_state, power_inst);
        softsp->dip = dip;

#ifdef  ACPI_POWER_BUTTON
        (void) power_attach_acpi(softsp);
#else
        if (power_setup_regs(softsp) != DDI_SUCCESS) {
                cmn_err(CE_WARN, "power_attach: failed to setup registers");
                goto error;
        }

        if (ddi_get_iblock_cookie(dip, 0,
            &softsp->high_iblock_cookie) != DDI_SUCCESS) {
                cmn_err(CE_WARN, "power_attach: ddi_get_soft_iblock_cookie "
                    "failed.");
                goto error;
        }
        mutex_init(&softsp->power_intr_mutex, NULL, MUTEX_DRIVER,
            softsp->high_iblock_cookie);

        if (ddi_add_intr(dip, 0, &softsp->high_iblock_cookie, NULL,
            power_high_intr, (caddr_t)softsp) != DDI_SUCCESS) {
                cmn_err(CE_WARN, "power_attach: failed to add high-level "
                    " interrupt handler.");
                mutex_destroy(&softsp->power_intr_mutex);
                goto error;
        }
#endif  /* ACPI_POWER_BUTTON */

        if (ddi_get_soft_iblock_cookie(dip, DDI_SOFTINT_LOW,
            &softsp->soft_iblock_cookie) != DDI_SUCCESS) {
                cmn_err(CE_WARN, "power_attach: ddi_get_soft_iblock_cookie "
                    "failed.");
                mutex_destroy(&softsp->power_intr_mutex);
                ddi_remove_intr(dip, 0, NULL);
                goto error;
        }

        mutex_init(&softsp->power_mutex, NULL, MUTEX_DRIVER,
            (void *)softsp->soft_iblock_cookie);

        if (ddi_add_softintr(dip, DDI_SOFTINT_LOW, &softsp->softintr_id,
            NULL, NULL, power_soft_intr, (caddr_t)softsp) != DDI_SUCCESS) {
                cmn_err(CE_WARN, "power_attach: failed to add soft "
                    "interrupt handler.");
                mutex_destroy(&softsp->power_mutex);
                mutex_destroy(&softsp->power_intr_mutex);
                ddi_remove_intr(dip, 0, NULL);
                goto error;
        }

        ddi_report_dev(dip);

        return (DDI_SUCCESS);

error:
#ifdef  ACPI_POWER_BUTTON
        /*
         * detach ACPI power button
         */
        power_detach_acpi(softsp);
#else
        power_free_regs(softsp);
#endif  /* ACPI_POWER_BUTTON */
        ddi_remove_minor_node(dip, "power_button");
        ddi_soft_state_free(power_state, power_inst);
        return (DDI_FAILURE);
}

/*ARGSUSED*/
/*
 * This driver doesn't detach.
 */
static int
power_detach(dev_info_t *dip, ddi_detach_cmd_t cmd)
{
        /*
         * Since the "power" node has "reg" property, as part of
         * the suspend operation, detach(9E) entry point is called.
         * There is no state to save, since this register is used
         * by OBP to power off the system and the state of the
         * power off is preserved by hardware.
         */
        return ((cmd == DDI_SUSPEND) ? DDI_SUCCESS :
            DDI_FAILURE);
}


#ifndef ACPI_POWER_BUTTON
/*
 * Handler for the high-level interrupt.
 */
static uint_t
power_high_intr(caddr_t arg)
{
        struct power_soft_state *softsp = (struct power_soft_state *)arg;
        ddi_acc_handle_t hdl = softsp->power_rhandle;
        uint8_t         reg;

        hrtime_t tstamp;
        static hrtime_t o_tstamp = 0;
        static hrtime_t power_button_tstamp = 0;
        static int power_button_cnt;

        if (softsp->power_regs_mapped) {
                mutex_enter(&softsp->power_intr_mutex);

                /* Check if power button interrupt is delivered by EPIC HW */
                if (hasEPIC) {
                        /* read isr - first issue command */
                        EPIC_WR(hdl, softsp->power_btn_reg,
                            EPIC_ATOM_INTR_READ);
                        /* next, read the reg */
                        EPIC_RD(hdl, softsp->power_btn_reg, reg);

                        if (reg & EPIC_FIRE_INTERRUPT) {  /* PB pressed */
                                /* clear the interrupt */
                                EPIC_WR(hdl, softsp->power_btn_reg,
                                    EPIC_ATOM_INTR_CLEAR);
                        } else {
                                if (!softsp->power_btn_ioctl) {
                                        mutex_exit(&softsp->power_intr_mutex);
                                        return (DDI_INTR_CLAIMED);
                                }
                                softsp->power_btn_ioctl = B_FALSE;
                        }
                } else {
                        reg = ddi_get8(hdl, softsp->power_btn_reg);
                        if (reg & softsp->power_btn_bit) {
                                reg &= softsp->power_btn_bit;
                                ddi_put8(hdl, softsp->power_btn_reg, reg);
                                (void) ddi_get8(hdl, softsp->power_btn_reg);
                        } else {
                                if (!softsp->power_btn_ioctl) {
                                        mutex_exit(&softsp->power_intr_mutex);
                                        return (DDI_INTR_CLAIMED);
                                }
                                softsp->power_btn_ioctl = B_FALSE;
                        }
                }
                mutex_exit(&softsp->power_intr_mutex);
        }

        tstamp = gethrtime();

        /* need to deal with power button debounce */
        if (o_tstamp && (tstamp - o_tstamp) < power_button_debounce) {
                o_tstamp = tstamp;
                return (DDI_INTR_CLAIMED);
        }
        o_tstamp = tstamp;

        power_button_cnt++;

        mutex_enter(&softsp->power_intr_mutex);
        power_button_pressed++;
        mutex_exit(&softsp->power_intr_mutex);

        /*
         * If power button abort is enabled and power button was pressed
         * power_button_abort_presses times within power_button_abort_interval
         * then call abort_sequence_enter();
         */
        if (power_button_abort_enable) {
                if (power_button_abort_presses == 1 ||
                    tstamp < (power_button_tstamp +
                    power_button_abort_interval)) {
                        if (power_button_cnt == power_button_abort_presses) {
                                mutex_enter(&softsp->power_intr_mutex);
                                power_button_cancel += power_button_timeouts;
                                power_button_pressed = 0;
                                mutex_exit(&softsp->power_intr_mutex);
                                power_button_cnt = 0;
                                abort_sequence_enter("Power Button Abort");
                                return (DDI_INTR_CLAIMED);
                        }
                } else {
                        power_button_cnt = 1;
                        power_button_tstamp = tstamp;
                }
        }

        if (!power_button_enable)
                return (DDI_INTR_CLAIMED);

        /* post softint to issue timeout for power button action */
        if (softsp->softintr_id != NULL)
                ddi_trigger_softintr(softsp->softintr_id);

        return (DDI_INTR_CLAIMED);
}
#endif  /* ifndef ACPI_POWER_BUTTON */

/*
 * Handle the softints....
 *
 * If only one softint is posted for several button presses, record
 * the number of additional presses just incase this was actually not quite
 * an Abort sequence so that we can log this event later.
 *
 * Issue a timeout with a duration being a fraction larger than
 * the specified Abort interval inorder to perform a power down if required.
 */
static uint_t
power_soft_intr(caddr_t arg)
{
        struct power_soft_state *softsp = (struct power_soft_state *)arg;

        if (!power_button_abort_enable)
                return (power_issue_shutdown(arg));

        mutex_enter(&softsp->power_intr_mutex);
        if (!power_button_pressed) {
                mutex_exit(&softsp->power_intr_mutex);
                return (DDI_INTR_CLAIMED);
        }

        /*
         * Schedule a timeout to do the necessary
         * work for shutdown, only one timeout for
         * n presses if power button was pressed
         * more than once before softint fired
         */
        if (power_button_pressed > 1)
                additional_presses += power_button_pressed - 1;

        timeout_cancel = 0;
        power_button_pressed = 0;
        power_button_timeouts++;
        mutex_exit(&softsp->power_intr_mutex);
        (void) timeout((void(*)(void *))power_timeout,
            softsp, NSEC_TO_TICK(power_button_abort_interval) +
            ABORT_INCREMENT_DELAY);

        return (DDI_INTR_CLAIMED);
}

/*
 * Upon receiving a timeout the following is determined:
 *
 * If an  Abort sequence was issued, then we cancel all outstanding timeouts
 * and additional presses prior to the Abort sequence.
 *
 * If we had multiple timeouts issued and the abort sequence was not met,
 * then we had more than one button press to power down the machine. We
 * were probably trying to issue an abort. So log a message indicating this
 * and cancel all outstanding timeouts.
 *
 * If we had just one timeout and the abort sequence was not met then
 * we really did want to power down the machine, so call power_issue_shutdown()
 * to do the work and schedule a power down
 */
static void
power_timeout(caddr_t arg)
{
        struct power_soft_state *softsp = (struct power_soft_state *)arg;
        static int first = 0;

        /*
         * Abort was generated cancel all outstanding power
         * button timeouts
         */
        mutex_enter(&softsp->power_intr_mutex);
        if (power_button_cancel) {
                power_button_cancel--;
                power_button_timeouts--;
                if (!first) {
                        first++;
                        additional_presses = 0;
                }
                mutex_exit(&softsp->power_intr_mutex);
                return;
        }
        first = 0;

        /*
         * We get here if the timeout(s) have fired and they were
         * not issued prior to an abort.
         *
         * If we had more than one press in the interval we were
         * probably trying to issue an abort, but didnt press the
         * required number within the interval. Hence cancel all
         * timeouts and do not continue towards shutdown.
         */
        if (!timeout_cancel) {
                timeout_cancel = power_button_timeouts +
                    additional_presses;

                power_button_timeouts--;
                if (!power_button_timeouts)
                        additional_presses = 0;

                if (timeout_cancel > 1) {
                        mutex_exit(&softsp->power_intr_mutex);
                        cmn_err(CE_NOTE, "Power Button pressed "
                            "%d times, cancelling all requests",
                            timeout_cancel);
                        return;
                }
                mutex_exit(&softsp->power_intr_mutex);

                /* Go and do the work to request shutdown */
                (void) power_issue_shutdown((caddr_t)softsp);
                return;
        }

        power_button_timeouts--;
        if (!power_button_timeouts)
                additional_presses = 0;
        mutex_exit(&softsp->power_intr_mutex);
}

#ifdef ACPI_POWER_BUTTON
static void
do_shutdown(void)
{
        proc_t *initpp;

        /*
         * If we're still booting and init(1) isn't set up yet, simply halt.
         */
        mutex_enter(&pidlock);
        initpp = prfind(P_INITPID);
        mutex_exit(&pidlock);
        if (initpp == NULL) {
                extern void halt(char *);
                halt("Power off the System");   /* just in case */
        }

        /*
         * else, graceful shutdown with inittab and all getting involved
         */
        psignal(initpp, SIGPWR);
}
#endif

static uint_t
power_issue_shutdown(caddr_t arg)
{
        struct power_soft_state *softsp = (struct power_soft_state *)arg;

        mutex_enter(&softsp->power_mutex);
        softsp->events |= PB_BUTTON_PRESS;
        if (softsp->monitor_on != 0) {
                mutex_exit(&softsp->power_mutex);
                pollwakeup(&softsp->pollhd, POLLRDNORM);
                pollwakeup(&softsp->pollhd, POLLIN);
                power_gen_sysevent(softsp);
                return (DDI_INTR_CLAIMED);
        }

        if (!softsp->shutdown_pending) {
                cmn_err(CE_WARN, "Power off requested from power button or "
                    "SC, powering down the system!");
                softsp->shutdown_pending = 1;
                do_shutdown();

                /*
                 * Wait a while for "do_shutdown()" to shut down the system
                 * before logging an error message.
                 */
                (void) timeout((void(*)(void *))power_log_message, NULL,
                    100 * hz);
        }
        mutex_exit(&softsp->power_mutex);

        return (DDI_INTR_CLAIMED);
}

static void
power_gen_sysevent(struct power_soft_state *softsp)
{
        nvlist_t *attr_list = NULL;
        int err;
        char pathname[MAXPATHLEN];
        char hid[9] = "\0";

        /* Allocate and build sysevent attribute list */
        err = nvlist_alloc(&attr_list, NV_UNIQUE_NAME_TYPE, DDI_NOSLEEP);
        if (err != 0) {
                cmn_err(CE_WARN,
                    "cannot allocate memory for sysevent attributes\n");
                return;
        }

#ifdef ACPI_POWER_BUTTON
        /* Only control method power button has HID */
        if (softsp->gpe_attached) {
                (void) strlcpy(hid, "PNP0C0C", sizeof (hid));
        }
#endif

        err = nvlist_add_string(attr_list, PWRCTL_DEV_HID, hid);
        if (err != 0) {
                cmn_err(CE_WARN,
                    "Failed to add attr [%s] for %s/%s event",
                    PWRCTL_DEV_HID, EC_PWRCTL, ESC_PWRCTL_POWER_BUTTON);
                nvlist_free(attr_list);
                return;
        }

        (void) ddi_pathname(softsp->dip, pathname);
        err = nvlist_add_string(attr_list, PWRCTL_DEV_PHYS_PATH, pathname);
        if (err != 0) {
                cmn_err(CE_WARN,
                    "Failed to add attr [%s] for %s/%s event",
                    PWRCTL_DEV_PHYS_PATH, EC_PWRCTL, ESC_PWRCTL_POWER_BUTTON);
                nvlist_free(attr_list);
                return;
        }

        /* Generate/log sysevent */
        err = ddi_log_sysevent(softsp->dip, DDI_VENDOR_SUNW, EC_PWRCTL,
            ESC_PWRCTL_POWER_BUTTON, attr_list, NULL, DDI_NOSLEEP);
        if (err != DDI_SUCCESS) {
                cmn_err(CE_WARN,
                    "cannot log sysevent, err code %x\n", err);
        }

        nvlist_free(attr_list);
}

/*
 * Open the device.
 */
/*ARGSUSED*/
static int
power_open(dev_t *devp, int openflags, int otyp, cred_t *credp)
{
        struct power_soft_state *softsp;
        int clone;

        if (otyp != OTYP_CHR)
                return (EINVAL);

        if ((softsp = ddi_get_soft_state(power_state, power_inst)) ==
            NULL)
                return (ENXIO);

        mutex_enter(&softsp->power_mutex);
        for (clone = 1; clone < POWER_MAX_CLONE; clone++)
                if (!softsp->clones[clone])
                        break;

        if (clone == POWER_MAX_CLONE) {
                cmn_err(CE_WARN, "power_open: No more allocation left "
                    "to create a clone minor.");
                mutex_exit(&softsp->power_mutex);
                return (ENXIO);
        }

        *devp = makedevice(getmajor(*devp), (power_inst << 8) + clone);
        softsp->clones[clone] = 1;
        mutex_exit(&softsp->power_mutex);

        return (0);
}

/*
 * Close the device.
 */
/*ARGSUSED*/
static  int
power_close(dev_t dev, int openflags, int otyp, cred_t *credp)
{
        struct power_soft_state *softsp;
        int clone;

        if (otyp != OTYP_CHR)
                return (EINVAL);

        if ((softsp = ddi_get_soft_state(power_state, power_inst)) ==
            NULL)
                return (ENXIO);

        clone = POWER_MINOR_TO_CLONE(getminor(dev));
        mutex_enter(&softsp->power_mutex);
        if (softsp->monitor_on == clone)
                softsp->monitor_on = 0;
        softsp->clones[clone] = 0;
        mutex_exit(&softsp->power_mutex);

        return (0);
}

/*ARGSUSED*/
static  int
power_ioctl(dev_t dev, int cmd, intptr_t arg, int mode, cred_t *cred_p,
    int *rval_p)
{
        struct power_soft_state *softsp;
        int clone;

        if ((softsp = ddi_get_soft_state(power_state, power_inst)) ==
            NULL)
                return (ENXIO);

        clone = POWER_MINOR_TO_CLONE(getminor(dev));
        switch (cmd) {
        case PB_BEGIN_MONITOR:
                mutex_enter(&softsp->power_mutex);
                if (softsp->monitor_on) {
                        mutex_exit(&softsp->power_mutex);
                        return (EBUSY);
                }
                softsp->monitor_on = clone;
                mutex_exit(&softsp->power_mutex);
                return (0);

        case PB_END_MONITOR:
                mutex_enter(&softsp->power_mutex);

                /*
                 * If PB_END_MONITOR is called without first
                 * calling PB_BEGIN_MONITOR, an error will be
                 * returned.
                 */
                if (!softsp->monitor_on) {
                        mutex_exit(&softsp->power_mutex);
                        return (ENXIO);
                }

                /*
                 * This clone is not monitoring the button.
                 */
                if (softsp->monitor_on != clone) {
                        mutex_exit(&softsp->power_mutex);
                        return (EINVAL);
                }
                softsp->monitor_on = 0;
                mutex_exit(&softsp->power_mutex);
                return (0);

        case PB_GET_EVENTS:
                mutex_enter(&softsp->power_mutex);
                if (ddi_copyout((void *)&softsp->events, (void *)arg,
                    sizeof (int), mode) != 0) {
                        mutex_exit(&softsp->power_mutex);
                        return (EFAULT);
                }

                /*
                 * This ioctl returned the events detected since last
                 * call.  Note that any application can get the events
                 * and clear the event register.
                 */
                softsp->events = 0;
                mutex_exit(&softsp->power_mutex);
                return (0);

        /*
         * This ioctl is used by the test suite.
         */
        case PB_CREATE_BUTTON_EVENT:
#ifdef  ACPI_POWER_BUTTON
                (UINT32)power_acpi_fixed_event((void *)softsp);
#else
                if (softsp->power_regs_mapped) {
                        mutex_enter(&softsp->power_intr_mutex);
                        softsp->power_btn_ioctl = B_TRUE;
                        mutex_exit(&softsp->power_intr_mutex);
                }
                (void) power_high_intr((caddr_t)softsp);
#endif  /* ACPI_POWER_BUTTON */
                return (0);

        default:
                return (ENOTTY);
        }
}

/*ARGSUSED*/
static int
power_chpoll(dev_t dev, short events, int anyyet,
    short *reventsp, struct pollhead **phpp)
{
        struct power_soft_state *softsp;

        if ((softsp = ddi_get_soft_state(power_state, power_inst)) == NULL)
                return (ENXIO);

        mutex_enter(&softsp->power_mutex);
        *reventsp = 0;
        if (softsp->events)
                *reventsp = POLLRDNORM|POLLIN;
        else {
                if (!anyyet)
                        *phpp = &softsp->pollhd;
        }
        mutex_exit(&softsp->power_mutex);

        return (0);
}

static void
power_log_message(void)
{
        struct power_soft_state *softsp;

        if ((softsp = ddi_get_soft_state(power_state, power_inst)) == NULL) {
                cmn_err(CE_WARN, "Failed to get internal state!");
                return;
        }

        mutex_enter(&softsp->power_mutex);
        softsp->shutdown_pending = 0;
        cmn_err(CE_WARN, "Failed to shut down the system!");
        mutex_exit(&softsp->power_mutex);
}

#ifdef  ACPI_POWER_BUTTON
/*
 *
 */
/*ARGSUSED*/
static ACPI_STATUS
acpi_device(ACPI_HANDLE obj, UINT32 nesting, void *context, void **rv)
{

        *((ACPI_HANDLE *)context) = obj;
        return (AE_OK);
}

/*
 *
 */
static ACPI_HANDLE
probe_acpi_pwrbutton()
{
        ACPI_HANDLE obj = NULL;

        (void) AcpiGetDevices("PNP0C0C", acpi_device, (void *)&obj, NULL);
        return (obj);
}

static UINT32
power_acpi_fixed_event(void *ctx)
{

        mutex_enter(&((struct power_soft_state *)ctx)->power_intr_mutex);
        power_button_pressed++;
        mutex_exit(&((struct power_soft_state *)ctx)->power_intr_mutex);

        /* post softint to issue timeout for power button action */
        if (((struct power_soft_state *)ctx)->softintr_id != NULL)
                ddi_trigger_softintr(
                    ((struct power_soft_state *)ctx)->softintr_id);

        return (AE_OK);
}

/*ARGSUSED*/
static void
power_acpi_notify_event(ACPI_HANDLE obj, UINT32 val, void *ctx)
{
        if (val == 0x80)
                (void) power_acpi_fixed_event(ctx);
}

/*
 *
 */
static int
power_probe_method_button(struct power_soft_state *softsp)
{
        ACPI_HANDLE button_obj;

        button_obj = probe_acpi_pwrbutton();
        softsp->button_obj = button_obj;        /* remember obj */
        if ((button_obj != NULL) &&
            (AcpiInstallNotifyHandler(button_obj, ACPI_DEVICE_NOTIFY,
            power_acpi_notify_event, (void*)softsp) == AE_OK))
                return (1);
        return (0);
}

/*
 *
 */
static int
power_probe_fixed_button(struct power_soft_state *softsp)
{
        ACPI_TABLE_FADT *fadt;

        if (AcpiGetTable(ACPI_SIG_FADT, 1, (ACPI_TABLE_HEADER **) &fadt) !=
            AE_OK)
                return (0);

        if ((fadt->Flags & ACPI_FADT_POWER_BUTTON) == 0) {
                if (AcpiInstallFixedEventHandler(ACPI_EVENT_POWER_BUTTON,
                    power_acpi_fixed_event, (void *)softsp) == AE_OK)
                        return (1);
        }
        return (0);
}


/*
 *
 */
static int
power_attach_acpi(struct power_soft_state *softsp)
{

        /*
         * If we've attached anything already, return an error
         */
        if ((softsp->gpe_attached) || (softsp->fixed_attached))
                return (DDI_FAILURE);

        /*
         * attempt to attach both a fixed-event handler and a GPE
         * handler; remember what we got
         */
        softsp->fixed_attached = (power_probe_fixed_button(softsp) != 0);
        softsp->gpe_attached = (power_probe_method_button(softsp) != 0);

        /*
         * If we've attached anything now, return success
         */
        if ((softsp->gpe_attached) || (softsp->fixed_attached))
                return (DDI_SUCCESS);

        return (DDI_FAILURE);
}

/*
 *
 */
static void
power_detach_acpi(struct power_soft_state *softsp)
{
        if (softsp->gpe_attached) {
                if (AcpiRemoveNotifyHandler(softsp->button_obj,
                    ACPI_DEVICE_NOTIFY, power_acpi_notify_event) != AE_OK)
                        cmn_err(CE_WARN, "!power: failed to remove Notify"
                            " handler");
        }

        if (softsp->fixed_attached) {
                if (AcpiRemoveFixedEventHandler(ACPI_EVENT_POWER_BUTTON,
                    power_acpi_fixed_event) != AE_OK)
                        cmn_err(CE_WARN, "!power: failed to remove Power"
                            " Button handler");
        }
}

#else
/*
 * Code for platforms that have EPIC processor for processing power
 * button interrupts.
 */
static int
power_setup_epic_regs(dev_info_t *dip, struct power_soft_state *softsp)
{
        ddi_device_acc_attr_t   attr;
        uint8_t *reg_base;

        attr.devacc_attr_version = DDI_DEVICE_ATTR_V0;
        attr.devacc_attr_endian_flags = DDI_STRUCTURE_LE_ACC;
        attr.devacc_attr_dataorder = DDI_STRICTORDER_ACC;
        if (ddi_regs_map_setup(dip, 0, (caddr_t *)&reg_base,
            EPIC_REGS_OFFSET, EPIC_REGS_LEN, &attr,
            &softsp->power_rhandle) != DDI_SUCCESS) {
                return (DDI_FAILURE);
        }

        softsp->power_btn_reg = reg_base;
        softsp->power_regs_mapped = B_TRUE;

        /* Clear power button interrupt first */
        EPIC_WR(softsp->power_rhandle, softsp->power_btn_reg,
            EPIC_ATOM_INTR_CLEAR);

        /* Enable EPIC interrupt for power button single press event */
        EPIC_WR(softsp->power_rhandle, softsp->power_btn_reg,
            EPIC_ATOM_INTR_ENABLE);

        /*
         * At this point, EPIC interrupt processing is fully initialised.
         */
        hasEPIC = B_TRUE;
        return (DDI_SUCCESS);
}

/*
 *
 * power button register definitions for acpi register on m1535d
 */
#define M1535D_PWR_BTN_REG_01           0x1
#define M1535D_PWR_BTN_EVENT_FLAG       0x1

static int
power_setup_m1535_regs(dev_info_t *dip, struct power_soft_state *softsp)
{
        ddi_device_acc_attr_t   attr;
        uint8_t *reg_base;

        attr.devacc_attr_version = DDI_DEVICE_ATTR_V0;
        attr.devacc_attr_endian_flags = DDI_STRUCTURE_LE_ACC;
        attr.devacc_attr_dataorder = DDI_STRICTORDER_ACC;
        if (ddi_regs_map_setup(dip, 0, (caddr_t *)&reg_base, 0, 0, &attr,
            &softsp->power_rhandle) != DDI_SUCCESS) {
                return (DDI_FAILURE);
        }
        softsp->power_btn_reg = &reg_base[M1535D_PWR_BTN_REG_01];
        softsp->power_btn_bit = M1535D_PWR_BTN_EVENT_FLAG;
        softsp->power_regs_mapped = B_TRUE;
        return (DDI_SUCCESS);
}

/*
 * MBC Fire/SSI Interrupt Status Register definitions
 */
#define FIRE_SSI_ISR                    0x0
#define FIRE_SSI_INTR_ENA               0x8
#define FIRE_SSI_SHUTDOWN_REQ           0x4

static int
power_setup_mbc_regs(dev_info_t *dip, struct power_soft_state *softsp)
{
        ddi_device_acc_attr_t   attr;
        uint8_t *reg_base;
        ddi_acc_handle_t hdl;
        uint8_t reg;

        attr.devacc_attr_version = DDI_DEVICE_ATTR_V0;
        attr.devacc_attr_endian_flags = DDI_STRUCTURE_LE_ACC;
        attr.devacc_attr_dataorder = DDI_STRICTORDER_ACC;
        if (ddi_regs_map_setup(dip, 0, (caddr_t *)&reg_base, 0, 0, &attr,
            &softsp->power_rhandle) != DDI_SUCCESS) {
                return (DDI_FAILURE);
        }
        softsp->power_btn_reg = &reg_base[FIRE_SSI_ISR];
        softsp->power_btn_bit = FIRE_SSI_SHUTDOWN_REQ;
        hdl = softsp->power_rhandle;
        /*
         * Clear MBC Fire Power Button interrupt, if set.
         */
        reg = ddi_get8(hdl, softsp->power_btn_reg);
        if (reg & softsp->power_btn_bit) {
                reg &= softsp->power_btn_bit;
                ddi_put8(hdl, softsp->power_btn_reg, reg);
                (void) ddi_get8(hdl, softsp->power_btn_reg);
        }
        /*
         * Enable MBC Fire Power Button interrupt.
         */
        reg = ddi_get8(hdl, &reg_base[FIRE_SSI_INTR_ENA]);
        reg |= FIRE_SSI_SHUTDOWN_REQ;
        ddi_put8(hdl, &reg_base[FIRE_SSI_INTR_ENA], reg);

        softsp->power_regs_mapped = B_TRUE;

        return (DDI_SUCCESS);
}

/*
 * Setup register map for the power button
 * NOTE:- we only map registers for platforms if
 * the OBP power device has any of the following
 * properties:
 *
 * a) Boston:  power-device-type set to "SUNW,mbc"
 * b) Seattle: power-device-type set to "SUNW,pic18lf65j10"
 * c) Chalupa: compatible set to "ali1535d+-power"
 *
 * Cases (a) and (b) are defined in FWARC 2005/687.
 * If none of the above conditions are true, then we
 * do not need to map in any registers, and this
 * function can simply return DDI_SUCCESS.
 */
static int
power_setup_regs(struct power_soft_state *softsp)
{
        char    *binding_name;
        char    *power_type = NULL;
        int     retval = DDI_SUCCESS;

        softsp->power_regs_mapped = B_FALSE;
        softsp->power_btn_ioctl = B_FALSE;
        binding_name = ddi_binding_name(softsp->dip);
        if (ddi_prop_lookup_string(DDI_DEV_T_ANY, softsp->dip,
            DDI_PROP_DONTPASS, POWER_DEVICE_TYPE,
            &power_type) == DDI_PROP_SUCCESS) {
                if (strcmp(power_type, "SUNW,mbc") == 0) {
                        retval = power_setup_mbc_regs(softsp->dip, softsp);
                } else if (strcmp(power_type, "SUNW,pic18lf65j10") == 0) {
                        retval = power_setup_epic_regs(softsp->dip, softsp);
                } else {
                        cmn_err(CE_WARN, "unexpected power-device-type: %s\n",
                            power_type);
                        retval = DDI_FAILURE;
                }
                ddi_prop_free(power_type);
        } else if (strcmp(binding_name, "ali1535d+-power") == 0) {
                retval = power_setup_m1535_regs(softsp->dip, softsp);
        }

        /*
         * If power-device-type does not exist AND the binding name is not
         * "ali1535d+-power", that means there is no additional HW and hence
         * no extra processing is necessary. In that case, retval should still
         * be set to its initial value of DDI_SUCCESS.
         */
        return (retval);
}

static void
power_free_regs(struct power_soft_state *softsp)
{
        if (softsp->power_regs_mapped)
                ddi_regs_map_free(&softsp->power_rhandle);
}
#endif  /* ACPI_POWER_BUTTON */