4 # This file and its contents are supplied under the terms of the
5 # Common Development and Distribution License ("CDDL"), version 1.0.
6 # You may only use this file in accordance with the terms of version
9 # A full copy of the text of the CDDL should have accompanied this
10 # source. A copy of the CDDL is also available via the Internet at
11 # http://www.illumos.org/license/CDDL.
15 # Copyright (c) 2016 by Delphix. All rights reserved.
18 .
$STF_SUITE/tests
/functional
/cli_root
/zpool_import
/zpool_import.kshlib
22 # It should be possible to rewind a pool beyond a configuration change.
26 # 2. Generate files and remember their md5sum.
27 # 3. Note last synced txg.
28 # 4. Take a snapshot to make sure old blocks are not overwritten.
29 # 5. Perform zpool add/attach/detach/remove operation.
30 # 6. Change device paths if requested and re-import pool.
31 # 7. Overwrite the files.
33 # 9. Verify that we can rewind the pool to the noted txg.
34 # 10. Verify that the files are readable and retain their old data.
37 # This test can fail since nothing guarantees that old MOS blocks aren't
38 # overwritten. Snapshots protect datasets and data files but not the MOS.
39 # sync_some_data_a_few_times interleaves file data and MOS data for a few
40 # txgs, thus increasing the odds that some txgs will have their MOS data
44 verify_runnable
"global"
46 function custom_cleanup
48 set_vdev_validate_skip
0
52 log_onexit custom_cleanup
56 typeset poolcreate
="$1"
58 typeset attachargs
="${3:-}"
59 typeset detachvdev
="${4:-}"
60 typeset removevdev
="${5:-}"
61 typeset finalpool
="${6:-}"
63 typeset poolcheck
="$poolcreate"
65 log_must zpool create
$TESTPOOL1 $poolcreate
67 log_must generate_data
$TESTPOOL1 $MD5FILE
69 # syncing a few times while writing new data increases the odds that MOS
70 # metadata for some of the txgs will survive
71 log_must sync_some_data_a_few_times
$TESTPOOL1
73 txg
=$
(get_last_txg_synced
$TESTPOOL1)
74 log_must zfs snapshot
-r $TESTPOOL1@snap1
77 # Perform config change operations
79 if [[ -n $addvdev ]]; then
80 log_must zpool add
-f $TESTPOOL1 $addvdev
82 if [[ -n $attachargs ]]; then
83 log_must zpool attach
$TESTPOOL1 $attachargs
85 if [[ -n $detachvdev ]]; then
86 log_must zpool detach
$TESTPOOL1 $detachvdev
88 if [[ -n $removevdev ]]; then
89 [[ -z $finalpool ]] &&
90 log_fail
"Must provide final pool status!"
91 log_must zpool remove
$TESTPOOL1 $removevdev
92 log_must wait_for_pool_config
$TESTPOOL1 "$finalpool"
94 if [[ -n $pathstochange ]]; then
96 # Change device paths and re-import pool to update labels
98 sudo zpool
export $TESTPOOL1
99 for dev
in $pathstochange; do
100 log_must
mv $dev "${dev}_new"
101 poolcheck
=$
(echo "$poolcheck" | \
102 sed "s:$dev:${dev}_new:g")
104 sudo zpool import
-d $DEVICE_DIR $TESTPOOL1
107 log_must overwrite_data
$TESTPOOL1 ""
109 log_must zpool
export $TESTPOOL1
111 log_must zpool import
-d $DEVICE_DIR -T $txg $TESTPOOL1
112 log_must check_pool_config
$TESTPOOL1 "$poolcheck"
114 log_must verify_data_md5sums
$MD5FILE
117 log_must zpool destroy
$TESTPOOL1
118 if [[ -n $pathstochange ]]; then
119 for dev
in $pathstochange; do
120 log_must
mv "${dev}_new" $dev
123 # Fast way to clear vdev labels
124 log_must zpool create
-f $TESTPOOL2 $VDEV0 $VDEV1 $VDEV2 $VDEV3 $VDEV4
125 log_must zpool destroy
$TESTPOOL2
130 function test_add_vdevs
132 typeset poolcreate
="$1"
133 typeset addvdevs
="$2"
135 log_note
"$0: pool '$poolcreate', add $addvdevs."
137 test_common
"$poolcreate" "$addvdevs"
140 function test_attach_vdev
142 typeset poolcreate
="$1"
143 typeset attachto
="$2"
144 typeset attachvdev
="$3"
146 log_note
"$0: pool '$poolcreate', attach $attachvdev to $attachto."
148 test_common
"$poolcreate" "" "$attachto $attachvdev"
151 function test_detach_vdev
153 typeset poolcreate
="$1"
154 typeset detachvdev
="$2"
156 log_note
"$0: pool '$poolcreate', detach $detachvdev."
158 test_common
"$poolcreate" "" "" "$detachvdev"
161 function test_attach_detach_vdev
163 typeset poolcreate
="$1"
164 typeset attachto
="$2"
165 typeset attachvdev
="$3"
166 typeset detachvdev
="$4"
168 log_note
"$0: pool '$poolcreate', attach $attachvdev to $attachto," \
169 "then detach $detachvdev."
171 test_common
"$poolcreate" "" "$attachto $attachvdev" "$detachvdev"
174 function test_remove_vdev
176 typeset poolcreate
="$1"
177 typeset removevdev
="$2"
178 typeset finalpool
="$3"
180 log_note
"$0: pool '$poolcreate', remove $removevdev."
182 test_common
"$poolcreate" "" "" "" "$removevdev" "$finalpool"
185 # Make the devices bigger to reduce chances of overwriting MOS metadata.
186 increase_device_sizes $
(( FILE_SIZE
* 4 ))
188 # Part of the rewind test is to see how it reacts to path changes
189 typeset pathstochange
="$VDEV0 $VDEV1 $VDEV2 $VDEV3"
191 log_note
" == test rewind after device addition == "
193 test_add_vdevs
"$VDEV0" "$VDEV1"
194 test_add_vdevs
"$VDEV0 $VDEV1" "$VDEV2"
195 test_add_vdevs
"$VDEV0" "$VDEV1 $VDEV2"
196 test_add_vdevs
"mirror $VDEV0 $VDEV1" "mirror $VDEV2 $VDEV3"
197 test_add_vdevs
"$VDEV0" "raidz $VDEV1 $VDEV2 $VDEV3"
198 test_add_vdevs
"$VDEV0" "log $VDEV1"
199 test_add_vdevs
"$VDEV0 log $VDEV1" "$VDEV2"
201 log_note
" == test rewind after device attach == "
203 test_attach_vdev
"$VDEV0" "$VDEV0" "$VDEV1"
204 test_attach_vdev
"mirror $VDEV0 $VDEV1" "$VDEV0" "$VDEV2"
205 test_attach_vdev
"$VDEV0 $VDEV1" "$VDEV0" "$VDEV2"
207 log_note
" == test rewind after device removal == "
209 # Once we remove a device it will be overlooked in the device scan, so we must
210 # preserve its original path
211 pathstochange
="$VDEV0 $VDEV2"
212 test_remove_vdev
"$VDEV0 $VDEV1 $VDEV2" "$VDEV1" "$VDEV0 $VDEV2"
215 # Path change and detach are incompatible. Detach changes the guid of the vdev
216 # so we have no direct way to link the new path to an existing vdev.
220 log_note
" == test rewind after device detach == "
222 test_detach_vdev
"mirror $VDEV0 $VDEV1" "$VDEV1"
223 test_detach_vdev
"mirror $VDEV0 $VDEV1 mirror $VDEV2 $VDEV3" "$VDEV1"
224 test_detach_vdev
"$VDEV0 log mirror $VDEV1 $VDEV2" "$VDEV2"
226 log_note
" == test rewind after device attach followed by device detach == "
229 # We need to disable vdev validation since once we detach VDEV1, VDEV0 will
230 # inherit the mirror tvd's guid and lose its original guid.
232 set_vdev_validate_skip
1
233 test_attach_detach_vdev
"$VDEV0" "$VDEV0" "$VDEV1" "$VDEV1"
234 set_vdev_validate_skip
0
236 log_pass
"zpool import rewind after configuration change passed."