usr/src/uts/Makefile

   1 #
   2 # CDDL HEADER START
   3 #
   4 # The contents of this file are subject to the terms of the
   5 # Common Development and Distribution License (the "License").
   6 # You may not use this file except in compliance with the License.
   7 #
   8 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
   9 # or http://www.opensolaris.org/os/licensing.
  10 # See the License for the specific language governing permissions
  11 # and limitations under the License.
  12 #
  13 # When distributing Covered Code, include this CDDL HEADER in each
  14 # file and include the License file at usr/src/OPENSOLARIS.LICENSE.
  15 # If applicable, add the following below this CDDL HEADER, with the
  16 # fields enclosed by brackets "[]" replaced with your own identifying
  17 # information: Portions Copyright [yyyy] [name of copyright owner]
  18 #
  19 # CDDL HEADER END
  20 #
  21 #
  22 # Copyright (c) 1989, 2010, Oracle and/or its affiliates. All rights reserved.
  23 # Copyright 2012 Nexenta Systems, Inc. All rights reserved.
  24 #
  25 # include global definitions
  26 include ../Makefile.master
  27
  28 #
  29 # List of architectures to build as part of the standard build.
  30 #
  31 # Some of these architectures are built in parallel (see i386_PARALLEL and
  32 # sparc_PARALLEL). This requires building some parts first before parallel build
  33 # can start. Platform make files know what should be built as a prerequisite for
  34 # the parallel build to work. The i386_PREREQ and sparc_PREREQ variables tell
  35 # which platform directory to enter to start making prerequisite dependencies.
  36 #
  37 sparc_ARCHITECTURES = sun4v sun4u sparc
  38
  39 i386_ARCHITECTURES = i86pc i86xpv intel
  40
  41 #
  42 # For i386 all architectures can be compiled in parallel.
  43 #
  44 # intel/Makefile knows how to build prerequisites needed for parallel build.
  45 #
  46 i386_PREREQ = intel
  47 i386_PARALLEL = $(i386_ARCHITECTURES)
  48
  49 #
  50 # For sparc all architectures can be compiled in parallel.
  51 #
  52 # sun4/Makefile knows how to build prerequisites needed for parallel build.
  53 # can start.
  54 #
  55 sparc_PREREQ = sun4
  56 sparc_PARALLEL = $(sparc_ARCHITECTURES)
  57
  58 #
  59 # Platforms defined in $(MACH)_PARALLEL are built in parallel. DUMMY is placed
  60 # at the end in case $(MACH)_PARALLEL is empty to prevent everything going in
  61 # parallel.
  62 #
  63 .PARALLEL: $($(MACH)_PARALLEL) DUMMY
  64
  65 #
  66 # For build prerequisites we use a special target which is constructed by adding
  67 # '.prereq' suffix to the $(MACH)_PREREQ.
  68 #
  69 PREREQ_TARGET = $($(MACH)_PREREQ:%=%.prereq)
  70
  71
  72 def             :=      TARGET= def
  73 all             :=      TARGET= all
  74 install         :=      TARGET= install
  75 install_h       :=      TARGET= install_h
  76 clean           :=      TARGET= clean
  77 clobber         :=      TARGET= clobber
  78 clobber_h       :=      TARGET= clobber
  79 lint            :=      TARGET= lint
  80 clean.lint      :=      TARGET= clean.lint
  81 check           :=      TARGET= check
  82 modlist         :=      TARGET= modlist
  83 modlist         :=      NO_STATE= -K $$MODSTATE$$$$
  84
  85 .KEEP_STATE:
  86
  87 def all lint: all_h $(PMTMO_FILE) $($(MACH)_ARCHITECTURES)
  88
  89 install: all_h install_dirs $(PMTMO_FILE) $($(MACH)_ARCHITECTURES)
  90
  91 install_dirs:
  92         @cd ..; pwd; $(MAKE) rootdirs
  93         @pwd
  94
  95 #
  96 # Rule to build prerequisites. The left part of the pattern will match
  97 # PREREQ_TARGET.
  98 #
  99 # The location of the Makefile is determined by strippinng '.prereq' suffix from
 100 # the target name. We add '.prereq' suffix to the target passed to the child
 101 # Makefile so that it can distinguish prerequisite build from the regular one.
 102 #
 103 #
 104 %.prereq:
 105         @cd $(@:%.prereq=%); pwd; $(MAKE) $(NO_STATE) $(TARGET).prereq
 106
 107 #
 108 # Rule to build architecture files. Build all required prerequisites and then
 109 # build the rest (potentially in parallel).
 110 #
 111 $($(MACH)_ARCHITECTURES): $(PREREQ_TARGET) FRC
 112         @cd $@; pwd; $(MAKE) $(NO_STATE) $(TARGET)
 113
 114 $(PMTMO_FILE) pmtmo_file: $(PATCH_MAKEUP_TABLE)
 115         @if [ -z "$(PATCH_MAKEUP_TABLE)" ] ; then \
 116                 echo 'ERROR: $$(PATCH_MAKEUP_TABLE) not set' \
 117                     'in environment' >&2 ; \
 118                 exit 1 ; \
 119         fi
 120         RELEASE="$(RELEASE)" MACH="$(MACH)" \
 121             $(CTFCVTPTBL) -o $(PMTMO_FILE) $(PATCH_MAKEUP_TABLE)
 122
 123 #
 124 # The following is the list of directories which contain Makefiles with
 125 # targets to install header file. The machine independent headers are
 126 # installed by invoking the Makefile in the directory containing the
 127 # header files. Machine and architecture dependent headers are installed
 128 # by invoking the main makefile for that architecture/machine which,
 129 # in turn, is responsible for invoking the Makefiles which install headers.
 130 # It is done this way so as not to assume that all of the header files in
 131 # the architecture/machine dependent subdirectories are in completely
 132 # isomorphic locations.
 133 #
 134 COMMON_HDRDIRS= common/avs \
 135                 common/c2 \
 136                 common/des \
 137                 common/fs \
 138                 common/gssapi \
 139                 common/idmap \
 140                 common/klm \
 141                 common/inet \
 142                 common/inet/ipf/netinet \
 143                 common/inet/kssl \
 144                 common/inet/nca \
 145                 common/inet/sockmods/netpacket \
 146                 common/io/bpf/net \
 147                 common/io/fibre-channel/fca/qlc \
 148                 common/ipp \
 149                 common/net \
 150                 common/netinet \
 151                 common/nfs \
 152                 common/pcmcia/sys \
 153                 common/rpc \
 154                 common/rpcsvc \
 155                 common/sharefs \
 156                 common/smb \
 157                 common/smbsrv \
 158                 common/sys \
 159                 common/vm
 160
 161
 162 #
 163 # Subset of COMMON_HDRDIRS in which at least one header is generated
 164 # at runtime (e.g., rpcgen), and in which "make clean" should run.
 165 # Other directories should be included here, but do not yet have the
 166 # necessary Makefile support (make clean).  See 6414855.
 167 #
 168 DYNHDRDIRS =    common/avs \
 169                 common/gssapi \
 170                 common/idmap \
 171                 common/io/fibre-channel/fca/qlc \
 172                 common/klm \
 173                 common/rpc \
 174                 common/rpcsvc \
 175                 common/sys
 176
 177 sparc_HDRDIRS= sun/sys
 178 i386_HDRDIRS= i86pc/vm i86xpv/vm
 179
 180 HDRDIRS= $(COMMON_HDRDIRS) $($(MACH)_HDRDIRS)
 181 install_h check: $(HDRDIRS) $($(MACH)_ARCHITECTURES)
 182
 183 $(HDRDIRS): FRC
 184         @cd $@; pwd; $(MAKE) $(TARGET)
 185
 186 # ensures that headers made by rpcgen and others are available in uts source
 187 # for kernel builds to reference without building install_h
 188 #
 189 all_h: FRC
 190         @cd common/sys; pwd; $(MAKE) $@
 191         @cd common/rpc; pwd; $(MAKE) $@
 192         @cd common/rpcsvc; pwd; $(MAKE) $@
 193         @cd common/gssapi; pwd; $(MAKE) $@
 194         @cd common/idmap; pwd; $(MAKE) $@
 195         @cd common/klm; pwd; $(MAKE) $@
 196
 197 clean clobber: $($(MACH)_ARCHITECTURES) $(DYNHDRDIRS)
 198         @if [ '$(PATCH_BUILD)' != '#' ] ; then \
 199                 echo $(RM) $(PMTMO_FILE) ; \
 200                 $(RM) $(PMTMO_FILE) ; \
 201         fi
 202
 203 # testing convenience
 204 clobber_h: $(DYNHDRDIRS)
 205
 206 clean.lint modlist: $($(MACH)_ARCHITECTURES)
 207
 208 #
 209 # Cross-reference customization: build a cross-reference over all of
 210 # the supported architectures.  Although there's no correct way to set
 211 # the include path (since we don't know what architecture is the one
 212 # the user will be interested in), it's historically been set to
 213 # mirror the $(XRDIRS) list, and that works kinda sorta okay.
 214 #
 215 XRDIRS = $(sparc_ARCHITECTURES) $(i386_ARCHITECTURES) sun4 sfmmu        \
 216         sun common
 217
 218 XRINCDIRS = $(XRDIRS)
 219
 220 cscope.out tags: FRC
 221         $(XREF) -x $@
 222
 223 FRC: