usr/src/uts/common/io/mr_sas/ld_pd_map.h

   1 /*
   2  * ld_pd_map.h
   3  *
   4  * Solaris MegaRAID device driver for SAS2.0 controllers
   5  * Copyright (c) 2008-2012, LSI Logic Corporation.
   6  * All rights reserved.
   7  *
   8  * Version:
   9  * Author:
  10  *              Swaminathan K S
  11  *              Arun Chandrashekhar
  12  *              Manju R
  13  *              Rasheed
  14  *              Shakeel Bukhari
  15  */
  16
  17 #ifndef _LD_PD_MAP
  18 #define _LD_PD_MAP
  19 #include <sys/scsi/scsi.h>
  20 #include "fusion.h"
  21
  22 struct mrsas_instance;  /* This will be defined in mr_sas.h */
  23
  24 /* raid->write_mode; raid->read_ahead; dcmd->state */
  25 /* Write through */
  26 #define WRITE_THROUGH                           0
  27 /* Delayed Write */
  28 #define WRITE_BACK                              1
  29
  30 /* SCSI CDB definitions */
  31 #define READ_6          0x08
  32 #define READ_16         0x88
  33 #define READ_10         0x28
  34 #define READ_12         0xA8
  35 #define WRITE_16        0x8A
  36 #define WRITE_10        0x2A
  37
  38 /* maximum disks per array */
  39 #define MAX_ROW_SIZE                            32
  40 /* maximum spans per logical drive */
  41 #define MAX_SPAN_DEPTH                          8
  42 #define MEGASAS_LOAD_BALANCE_FLAG               0x1
  43 #define MR_DEFAULT_IO_TIMEOUT   20
  44
  45
  46 union desc_value {
  47         U64 word;
  48         struct {
  49                 U32 low;
  50                 U32 high;
  51         } u1;
  52 };
  53
  54 typedef struct _LD_LOAD_BALANCE_INFO
  55 {
  56     U8      loadBalanceFlag;
  57     U8      reserved1;
  58     U16     raid1DevHandle[2];
  59     U16     scsi_pending_cmds[2];
  60     U64     last_accessed_block[2];
  61 } LD_LOAD_BALANCE_INFO, *PLD_LOAD_BALANCE_INFO;
  62
  63 #pragma pack(1)
  64 typedef struct _MR_FW_RAID_MAP_ALL {
  65         MR_FW_RAID_MAP raidMap;
  66         MR_LD_SPAN_MAP ldSpanMap[MAX_LOGICAL_DRIVES - 1];
  67 } MR_FW_RAID_MAP_ALL;
  68
  69 /*
  70  * Raid Context structure which describes MegaRAID specific IO Parameters
  71  * This resides at offset 0x60 where the SGL normally starts in MPT IO Frames
  72  */
  73 typedef struct _MPI2_SCSI_IO_VENDOR_UNIQUE {
  74         U8 nsegType;            /* 0x00 nseg[7:4], Type[3:0] */
  75         U8 resvd0;              /* 0x01 */
  76         U16 timeoutValue;       /* 0x02 -0x03 */
  77         U8 regLockFlags;        /* 0x04 */
  78         U8 reservedForHw1;      /* 0x05 */
  79         U16 ldTargetId;         /* 0x06 - 0x07 */
  80         U64 regLockRowLBA;      /* 0x08 - 0x0F */
  81         U32 regLockLength;      /* 0x10 - 0x13 */
  82         U16 nextLMId;           /* 0x14 - 0x15 */
  83         U8 extStatus;           /* 0x16 */
  84         U8 status;              /* 0x17 status */
  85         U8 RAIDFlags;           /* 0x18 resvd[7:6], ioSubType[5:4], */
  86                                 /* resvd[3:1], preferredCpu[0] */
  87         U8 numSGE;              /* 0x19 numSge; not including chain entries */
  88         U16 configSeqNum;       /* 0x1A -0x1B */
  89         U8 spanArm;             /* 0x1C span[7:5], arm[4:0] */
  90         U8 resvd2[3];           /* 0x1D-0x1f */
  91 } MPI2_SCSI_IO_VENDOR_UNIQUE, MPI25_SCSI_IO_VENDOR_UNIQUE;
  92
  93 #define RAID_CTX_SPANARM_ARM_SHIFT      (0)
  94 #define RAID_CTX_SPANARM_ARM_MASK       (0x1f)
  95
  96 #define RAID_CTX_SPANARM_SPAN_SHIFT     (5)
  97 #define RAID_CTX_SPANARM_SPAN_MASK      (0xE0)
  98
  99
 100 /*
 101  * RAID SCSI IO Request Message
 102  * Total SGE count will be one less
 103  * than  _MPI2_SCSI_IO_REQUEST
 104  */
 105 typedef struct _MPI2_RAID_SCSI_IO_REQUEST
 106 {
 107         uint16_t                DevHandle;                      /* 0x00 */
 108         uint8_t                 ChainOffset;                    /* 0x02 */
 109         uint8_t                 Function;                       /* 0x03 */
 110         uint16_t                Reserved1;                      /* 0x04 */
 111         uint8_t                 Reserved2;                      /* 0x06 */
 112         uint8_t                 MsgFlags;                       /* 0x07 */
 113         uint8_t                 VP_ID;                          /* 0x08 */
 114         uint8_t                 VF_ID;                          /* 0x09 */
 115         uint16_t                Reserved3;                      /* 0x0A */
 116         uint32_t                SenseBufferLowAddress;          /* 0x0C */
 117         uint16_t                SGLFlags;                       /* 0x10 */
 118         uint8_t                 SenseBufferLength;              /* 0x12 */
 119         uint8_t                 Reserved4;                      /* 0x13 */
 120         uint8_t                 SGLOffset0;                     /* 0x14 */
 121         uint8_t                 SGLOffset1;                     /* 0x15 */
 122         uint8_t                 SGLOffset2;                     /* 0x16 */
 123         uint8_t                 SGLOffset3;                     /* 0x17 */
 124         uint32_t                SkipCount;                      /* 0x18 */
 125         uint32_t                DataLength;                     /* 0x1C */
 126         uint32_t                BidirectionalDataLength;        /* 0x20 */
 127         uint16_t                IoFlags;                        /* 0x24 */
 128         uint16_t                EEDPFlags;                      /* 0x26 */
 129         uint32_t                EEDPBlockSize;                  /* 0x28 */
 130         uint32_t                SecondaryReferenceTag;          /* 0x2C */
 131         uint16_t                SecondaryApplicationTag;        /* 0x30 */
 132         uint16_t                ApplicationTagTranslationMask;  /* 0x32 */
 133         uint8_t                 LUN[8];                         /* 0x34 */
 134         uint32_t                Control;                        /* 0x3C */
 135         Mpi2ScsiIoCdb_t         CDB;                            /* 0x40 */
 136         MPI2_SCSI_IO_VENDOR_UNIQUE RaidContext;                 /* 0x60 */
 137         Mpi2SGEIOUnion_t        SGL; /* 0x80 */
 138 } MPI2_RAID_SCSI_IO_REQUEST, MPI2_POINTER PTR_MPI2_RAID_SCSI_IO_REQUEST,
 139 Mpi2RaidSCSIIORequest_t, MPI2_POINTER pMpi2RaidSCSIIORequest_t;
 140
 141 /*
 142  * define region lock types
 143  */
 144 typedef enum    _REGION_TYPE {
 145         REGION_TYPE_UNUSED      = 0,    /* lock is currently not active */
 146         REGION_TYPE_SHARED_READ = 1,    /* shared lock (for reads) */
 147         REGION_TYPE_SHARED_WRITE = 2,
 148         REGION_TYPE_EXCLUSIVE   = 3     /* exclusive lock (for writes) */
 149 } REGION_TYPE;
 150
 151
 152 #define DM_PATH_MAXPATH         2
 153 #define DM_PATH_FIRSTPATH       0
 154 #define DM_PATH_SECONDPATH      1
 155
 156 /* declare valid Region locking values */
 157 typedef enum _REGION_LOCK {
 158         REGION_LOCK_BYPASS              = 0,
 159         /* for RAID 6 single-drive failure */
 160         REGION_LOCK_UNCOND_SHARED_READ  = 1,
 161         REGION_LOCK_UNCOND_SHARED_WRITE = 2,
 162         REGION_LOCK_UNCOND_SHARED_OTHER = 3,
 163         REGION_LOCK_UNCOND_SHARED_EXCLUSIVE = 0xFF
 164 } REGION_LOCK;
 165
 166
 167 struct mrsas_init_frame2 {
 168         uint8_t cmd;                            /* 00h */
 169         uint8_t reserved_0;                     /* 01h */
 170         uint8_t cmd_status;                     /* 02h */
 171
 172         uint8_t reserved_1;                     /* 03h */
 173         uint32_t reserved_2;                    /* 04h */
 174
 175         uint32_t context;                       /* 08h */
 176         uint32_t pad_0;                         /* 0Ch */
 177
 178         uint16_t flags;                         /* 10h */
 179         uint16_t reserved_3;                    /* 12h */
 180         uint32_t data_xfer_len;                 /* 14h */
 181
 182         uint32_t queue_info_new_phys_addr_lo;   /* 18h */
 183         uint32_t queue_info_new_phys_addr_hi;   /* 1Ch */
 184         uint32_t queue_info_old_phys_addr_lo;   /* 20h */
 185         uint32_t queue_info_old_phys_addr_hi;   /* 24h */
 186         uint64_t        driverversion;          /* 28h */
 187         uint32_t reserved_4[4];                 /* 30h */
 188 };
 189
 190
 191 /*
 192  * Request descriptor types
 193  */
 194 #define MPI2_REQ_DESCRIPT_FLAGS_LD_IO           0x7
 195 #define MPI2_REQ_DESCRIPT_FLAGS_MFA             0x1
 196 #define MPI2_REQ_DESCRIPT_FLAGS_NO_LOCK         0x2
 197
 198 #define MPI2_REQ_DESCRIPT_FLAGS_TYPE_SHIFT      1
 199
 200
 201 /*
 202  * MPT RAID MFA IO Descriptor.
 203  */
 204 typedef struct _MR_RAID_MFA_IO_DESCRIPTOR {
 205         uint32_t        RequestFlags : 8;
 206         uint32_t        MessageAddress1 : 24;   /* bits 31:8 */
 207         uint32_t        MessageAddress2;        /* bits 61:32 */
 208 } MR_RAID_MFA_IO_REQUEST_DESCRIPTOR,
 209 *PMR_RAID_MFA_IO_REQUEST_DESCRIPTOR;
 210
 211 /* union of Request Descriptors */
 212 typedef union _MRSAS_REQUEST_DESCRIPTOR_UNION
 213 {
 214         MPI2_DEFAULT_REQUEST_DESCRIPTOR         Default;
 215         MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR   HighPriority;
 216         MPI2_SCSI_IO_REQUEST_DESCRIPTOR         SCSIIO;
 217         MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR     SCSITarget;
 218         MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR      RAIDAccelerator;
 219         MR_RAID_MFA_IO_REQUEST_DESCRIPTOR       MFAIo;
 220         U64 Words;
 221 } MRSAS_REQUEST_DESCRIPTOR_UNION;
 222
 223 #pragma pack()
 224
 225 enum {
 226         MRSAS_SCSI_VARIABLE_LENGTH_CMD          = 0x7F,
 227         MRSAS_SCSI_SERVICE_ACTION_READ32        = 0x9,
 228         MRSAS_SCSI_SERVICE_ACTION_WRITE32       = 0xB,
 229         MRSAS_SCSI_ADDL_CDB_LEN                 = 0x18,
 230         MRSAS_RD_WR_PROTECT                     = 0x20,
 231         MRSAS_EEDPBLOCKSIZE                     = 512
 232 };
 233
 234
 235 #define IEEE_SGE_FLAGS_ADDR_MASK        (0x03)
 236 #define IEEE_SGE_FLAGS_SYSTEM_ADDR      (0x00)
 237 #define IEEE_SGE_FLAGS_IOCDDR_ADDR      (0x01)
 238 #define IEEE_SGE_FLAGS_IOCPLB_ADDR      (0x02)
 239 #define IEEE_SGE_FLAGS_IOCPLBNTA_ADDR   (0x03)
 240 #define IEEE_SGE_FLAGS_CHAIN_ELEMENT    (0x80)
 241 #define IEEE_SGE_FLAGS_END_OF_LIST      (0x40)
 242
 243
 244 U8 MR_ValidateMapInfo(MR_FW_RAID_MAP_ALL *map, PLD_LOAD_BALANCE_INFO lbInfo);
 245 U16 MR_CheckDIF(U32, MR_FW_RAID_MAP_ALL *);
 246 U8 MR_BuildRaidContext(struct mrsas_instance *, struct IO_REQUEST_INFO *,
 247     MPI2_SCSI_IO_VENDOR_UNIQUE *, MR_FW_RAID_MAP_ALL *);
 248
 249 #endif /* _LD_PD_MAP */