remove obstack support
[uclibc-ng.git] / Rules.mak
blobf3c3d7a339fd6585a6e235a18459bc18ee57f8b6
1 # Rules.mak for uClibc
3 # Copyright (C) 2000-2008 Erik Andersen <andersen@uclibc.org>
5 # Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball.
8 # make nano-doc
9 # FOO = bar -- recursively expanded variable. Value is remebered verbatim.
10 # If it contains references to other variables, these references
11 # are expanded whenever this variable is _substituted_.
12 # FOO := bar -- simply expanded variable. Right hand is expanded when
13 # the variable is _defined_. Therefore faster than =.
14 # FOO ?= bar -- set a value only if it is not already set
15 # (behaves as =, not :=).
16 # FOO += bar -- append; if FOO is not defined, acts like = (not :=).
19 # check for proper make version
20 ifneq ($(findstring x3.7,x$(MAKE_VERSION)),)
21 $(error Your make is too old $(MAKE_VERSION). Go get at least 3.80)
22 endif
24 #-----------------------------------------------------------
25 # This file contains rules which are shared between multiple
26 # Makefiles. All normal configuration options live in the
27 # file named ".config". Don't mess with this file unless
28 # you know what you are doing.
30 clean_targets := clean realclean distclean \
31 objclean-y headers_clean-y CLEAN_utils
32 noconfig_targets := menuconfig config nconfig \
33 oldaskconfig silentoldconfig oldconfig allnoconfig allyesconfig \
34 alldefconfig randconfig defconfig savedefconfig listnewconfig \
35 olddefconfig \
36 xconfig gconfig update-po-config mconf qconf gconf nconf conf \
37 release dist tags help
40 #-----------------------------------------------------------
41 # If you are running a cross compiler, you will want to set
42 # 'CROSS_COMPILE' to something more interesting ... Target
43 # architecture is determined by asking the CC compiler what
44 # arch it compiles things for, so unless your compiler is
45 # broken, you should not need to specify TARGET_ARCH.
47 # Most people will set this stuff on the command line, i.e.
48 # make CROSS_COMPILE=arm-linux-
49 # will build uClibc for 'arm'.
50 # CROSS is still supported for backward compatibily only
52 CROSS_COMPILE ?= $(CROSS)
54 CC = $(CROSS_COMPILE)gcc
55 AR = $(CROSS_COMPILE)ar
56 LD = $(CROSS_COMPILE)ld
57 NM = $(CROSS_COMPILE)nm
58 OBJDUMP = $(CROSS_COMPILE)objdump
59 STRIPTOOL = $(CROSS_COMPILE)strip
61 INSTALL = install
62 LN = ln
63 RM = rm -f
64 TAR = tar
65 SED = sed
66 AWK = awk
68 STRIP_FLAGS ?= -x -R .note -R .comment
70 # Select the compiler needed to build binaries for your development system
71 HOSTCC = gcc
72 BUILD_CFLAGS = -Os
74 #---------------------------------------------------------
75 # Nothing beyond this point should ever be touched by mere
76 # mortals. Unless you hang out with the gods, you should
77 # probably leave all this stuff alone.
79 # strip quotes
80 qstrip = $(strip $(subst ",,$(1)))
81 #"))
83 # kconfig stuff
84 KCONFIG_CONFIG ?= $(top_builddir).config
85 KCONFIG_CONFIG := $(abspath $(KCONFIG_CONFIG))
86 export KCONFIG_CONFIG
87 KCONFIG_AUTOCONFIG := $(dir $(KCONFIG_CONFIG))include/config/auto.conf
88 export KCONFIG_AUTOCONFIG
89 KCONFIG_TRISTATE := $(dir $(KCONFIG_CONFIG))include/config/tristate.conf
90 export KCONFIG_TRISTATE
91 srctree := $(abspath $(top_srcdir))
92 export srctree
93 KCONFIG_AUTOHEADER := $(dir $(KCONFIG_CONFIG))include/generated/autoconf.h
94 export KCONFIG_AUTOHEADER
95 Kconfig := $(abspath $(top_srcdir)extra/Configs/Config.in)
97 # Pull in the user's uClibc configuration
98 ifeq ($(filter $(noconfig_targets) clean CLEAN_%,$(MAKECMDGOALS)),)
99 -include $(KCONFIG_CONFIG)
100 endif
102 TARGET_ARCH:=$(call qstrip,$(TARGET_ARCH))
103 ifeq ($(TARGET_ARCH),)
104 ARCH ?= $(shell uname -m | $(SED) -e s/i.86/i386/ \
105 -e s/sun.*/sparc/ -e s/sparc.*/sparc/ \
106 -e s/arm.*/arm/ -e s/sa110/arm/ \
107 -e s/nds32.*/nds32/ \
108 -e s/sh.*/sh/ \
109 -e s/s390x/s390/ -e s/parisc.*/hppa/ \
110 -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
111 -e s/xtensa.*/xtensa/ )
112 else
113 ARCH = $(TARGET_ARCH)
114 endif
115 export ARCH
117 # Make certain these contain a final "/", but no "//"s.
118 scrub_path = $(strip $(subst //,/, $(subst ,/, $(call qstrip,$(1)))))
119 TARGET_SUBARCH := $(call qstrip,$(TARGET_SUBARCH))
120 RUNTIME_PREFIX := $(call scrub_path,$(RUNTIME_PREFIX))
121 DEVEL_PREFIX := $(call scrub_path,$(DEVEL_PREFIX))
122 MULTILIB_DIR := $(call scrub_path,$(MULTILIB_DIR))
123 KERNEL_HEADERS := $(call scrub_path,$(KERNEL_HEADERS))
124 export RUNTIME_PREFIX DEVEL_PREFIX KERNEL_HEADERS MULTILIB_DIR
127 # Now config hard core
128 MAJOR_VERSION := 1
129 MINOR_VERSION := 0
130 SUBLEVEL := 20
131 EXTRAVERSION :=
132 VERSION := $(MAJOR_VERSION).$(MINOR_VERSION).$(SUBLEVEL)
133 ABI_VERSION := $(MAJOR_VERSION)
134 ifneq ($(EXTRAVERSION),)
135 VERSION := $(VERSION)$(EXTRAVERSION)
136 endif
137 # Ensure consistent sort order, 'gcc -print-search-dirs' behavior, etc.
138 LC_ALL := C
139 export MAJOR_VERSION MINOR_VERSION SUBLEVEL VERSION ABI_VERSION LC_ALL
141 LIBC := libc
142 SHARED_LIBNAME := $(LIBC).so.$(ABI_VERSION)
144 UCLIBC_LDSO_NAME := ld-uClibc
145 ARCH_NATIVE_BIT := 32
146 ifneq ($(findstring $(TARGET_ARCH) , hppa64 ia64 powerpc64 s390x sparc64 x86_64 ),)
147 UCLIBC_LDSO_NAME := ld64-uClibc
148 ARCH_NATIVE_BIT := 64
149 else
150 ifeq ($(CONFIG_MIPS_N64_ABI),y)
151 UCLIBC_LDSO_NAME := ld64-uClibc
152 ARCH_NATIVE_BIT := 64
153 endif
154 endif
156 UCLIBC_LDSO := $(UCLIBC_LDSO_NAME).so.$(ABI_VERSION)
157 NONSHARED_LIBNAME := uclibc_nonshared.a
158 NONSHARED_LIBPTHREAD := libpthread_nonshared.a
160 libc := $(top_builddir)lib/$(SHARED_LIBNAME)
161 libc.depend := $(top_builddir)lib/$(SHARED_LIBNAME:.$(ABI_VERSION)=)
162 interp := $(top_builddir)lib/interp.os
163 ldso := $(top_builddir)lib/$(UCLIBC_LDSO)
164 headers_dep := $(top_builddir)include/bits/sysnum.h \
165 $(top_builddir)include/bits/uClibc_config.h
166 sub_headers := $(headers_dep)
168 LIBS := $(interp) -L$(top_builddir)lib $(libc:.$(ABI_VERSION)=)
170 # Make sure DESTDIR and PREFIX can be used to install
171 # PREFIX is a uClibcism while DESTDIR is a common GNUism
172 ifndef PREFIX
173 PREFIX = $(DESTDIR)
174 endif
176 ifneq ($(HAVE_SHARED),y)
177 libc :=
178 interp :=
179 ldso :=
180 endif
182 comma:=,
183 space:= #
185 ifeq ($(CROSS_COMPILE),)
186 CROSS_COMPILE=$(call qstrip,$(CROSS_COMPILER_PREFIX))
187 endif
189 # A nifty macro to make testing gcc features easier
190 check_gcc=$(shell \
191 if $(CC) $(1) -S -o /dev/null -xc /dev/null > /dev/null 2>&1; \
192 then echo "$(1)"; else echo "$(2)"; fi)
193 check_as=$(shell \
194 if $(CC) -Wa,$(1) -Wa,-Z -c -o /dev/null -xassembler /dev/null > /dev/null 2>&1; \
195 then echo "-Wa,$(1)"; fi)
196 check_ld=$(shell \
197 if $(CC) $(LDFLAG-fuse-ld) $(CFLAG_-Wl--no-warn-mismatch) -Wl,$(1) $(CFLAG_-nostdlib) -o /dev/null -Wl,-b,binary /dev/null > /dev/null 2>&1; \
198 then echo "$(1)"; fi)
200 # Use variable indirection here so that we can have variable
201 # names with fun chars in them like equal signs
202 define check-tool-var
203 ifeq ($(filter $(clean_targets) CLEAN_%,$(MAKECMDGOALS)),)
204 _v = $(2)_$(3)
205 ifndef $$(_v)
206 $$(_v) := $$(call $(1),$(subst %, ,$(3)))
207 export $$(_v)
208 endif
209 endif
210 endef
212 # Usage: check-gcc-var,<flag>
213 # Check the C compiler to see if it supports <flag>.
214 # Export the variable CFLAG_<flag> if it does.
215 define check-gcc-var
216 $(call check-tool-var,check_gcc,CFLAG,$(1))
217 endef
218 # Usage: check-as-var,<flag>
219 # Check the assembler to see if it supports <flag>. Export the
220 # variable ASFLAG_<flag> if it does (for invoking the assembler),
221 # as well CFLAG_-Wa<flag> (for invoking the compiler driver).
222 define check-as-var
223 $(call check-tool-var,check_as,ASFLAG,$(1))
224 _v = CFLAG_-Wa$(1)
225 export $$(_v) = $$(if $$(ASFLAG_$(1)),-Wa$$(comma)$$(ASFLAG_$(1)))
226 endef
227 # Usage: check-ld-var,<flag>
228 # Check the linker to see if it supports <flag>. Export the
229 # variable LDFLAG_<flag> if it does (for invoking the linker),
230 # as well CFLAG_-Wl<flag> (for invoking the compiler driver).
231 define check-ld-var
232 $(call check-tool-var,check_ld,LDFLAG,$(1))
233 _v = CFLAG_-Wl$(1)
234 export $$(_v) = $$(if $$(LDFLAG_$(1)),-Wl$$(comma)$$(LDFLAG_$(1)))
235 endef
236 # Usage: cache-output-var,<variable>,<shell command>
237 # Execute <shell command> and cache the output in <variable>.
238 define cache-output-var
239 ifndef $(1)
240 $(1) := $$(shell $(2))
241 export $(1)
242 endif
243 endef
246 ARFLAGS:=cr
248 # Note: The check for -nostdlib has to be before all calls to check_ld
249 $(eval $(call check-gcc-var,-nostdlib))
250 $(eval $(call check-gcc-var,-nostartfiles))
251 # deliberately not named CFLAG-fuse-ld since unchecked and from user
252 LDFLAG-fuse-ld := $(filter -fuse-ld=%,$(call qstrip,$(UCLIBC_EXTRA_CFLAGS)))
253 # failed to merge target specific data of file /dev/null
254 # Could use -Wl,--script,$(top_srcdir)extra/scripts/none.lds as well.
255 $(eval $(call check-ld-var,--no-warn-mismatch))
257 $(eval $(call cache-output-var,GCC_VER,$(CC) -dumpversion))
258 GCC_VER := $(subst ., ,$(GCC_VER))
259 GCC_MAJOR_VER ?= $(word 1,$(GCC_VER))
260 GCC_MINOR_VER ?= $(word 2,$(GCC_VER))
262 # Flags in OPTIMIZATION are used only for non-debug builds
264 OPTIMIZATION:=
265 OPTIMIZATION-$(GCC_MAJOR_VER):=
266 OPTIMIZATION-$(GCC_MAJOR_VER).$(GCC_MINOR_VER):=
268 # Use '-Os' optimization if available, else use -O2, allow Config to override
269 $(eval $(call check-gcc-var,-Os))
270 ifneq ($(CFLAG_-Os),)
271 OPTIMIZATION += $(CFLAG_-Os)
272 else
273 $(eval $(call check-gcc-var,-O2))
274 OPTIMIZATION += $(CFLAG_-O2)
275 endif
276 # Use the gcc 3.4 -funit-at-a-time optimization when available
277 $(eval $(call check-gcc-var,-funit-at-a-time))
278 OPTIMIZATION-3.4 += $(CFLAG_-funit-at-a-time)
279 $(eval $(call check-gcc-var,-fstrict-aliasing))
280 OPTIMIZATION += $(CFLAG_-fstrict-aliasing)
282 # CPU_CFLAGS-y contain options which are not warnings,
283 # not include or library paths, and not optimizations.
285 # Why -funsigned-char: I hunted a bug related to incorrect
286 # sign extension of 'char' type for 10 hours straight. Not fun.
287 CPU_CFLAGS-y := -funsigned-char -fno-builtin
289 $(eval $(call check-gcc-var,-fno-asm))
290 CPU_CFLAGS-y += $(CFLAG_-fno-asm)
291 $(eval $(call check-gcc-var,-fmerge-all-constants))
292 CPU_CFLAGS-y += $(CFLAG_-fmerge-all-constants)
294 ifeq ($(UCLIBC_HAS_SOFT_FLOAT),y)
295 ifneq ($(TARGET_ARCH),bfin)
296 ifneq ($(TARGET_ARCH),lm32)
297 ifneq ($(TARGET_ARCH),nios2)
298 ifneq ($(TARGET_ARCH),nds32)
299 ifneq ($(TARGET_ARCH),sh)
300 ifneq ($(TARGET_ARCH),c6x)
301 ifneq ($(TARGET_ARCH),h8300)
302 ifneq ($(TARGET_ARCH),arc)
303 CPU_CFLAGS-y += -msoft-float
304 endif
305 endif
306 endif
307 endif
308 endif
309 endif
310 endif
311 endif
312 endif
314 $(eval $(call check-gcc-var,-std=gnu99))
315 CPU_CFLAGS-y += $(CFLAG_-std=gnu99)
317 CPU_CFLAGS-$(UCLIBC_FORMAT_SHARED_FLAT) += -mid-shared-library
318 CPU_CFLAGS-$(UCLIBC_FORMAT_FLAT_SEP_DATA) += -msep-data
320 CPU_LDFLAGS-$(ARCH_LITTLE_ENDIAN) += -Wl,-EL
321 CPU_LDFLAGS-$(ARCH_BIG_ENDIAN) += -Wl,-EB
323 PICFLAG-y := -fPIC
324 PICFLAG-$(UCLIBC_FORMAT_FDPIC_ELF) := -mfdpic
325 PICFLAG-$(UCLIBC_FORMAT_DSBT_ELF) := -mdsbt -fpic
326 PICFLAG := $(PICFLAG-y)
327 PIEFLAG_NAME:=-fPIE
329 $(eval $(call check-gcc-var,-fdata-sections))
330 $(eval $(call check-gcc-var,-ffunction-sections))
332 # Some nice CPU specific optimizations
333 ifeq ($(TARGET_ARCH),i386)
334 $(eval $(call check-gcc-var,-fomit-frame-pointer))
335 OPTIMIZATION += $(CFLAG_-fomit-frame-pointer)
337 ifeq ($(CONFIG_386)$(CONFIG_486)$(CONFIG_586),y)
338 # TODO: Change this to a gcc version check. This bug
339 # should be fixed with at least gcc-4.3.
340 # Non-SSE capable processor.
341 # NB: this may make SSE insns segfault!
342 # -O1 -march=pentium3, -Os -msse etc are known to be affected.
343 # See http://gcc.gnu.org/bugzilla/show_bug.cgi?id=13685
344 # -m32 is needed if host is 64-bit
345 OPTIMIZATION+=$(call check_gcc,-m32 -mpreferred-stack-boundary=2,)
346 else
347 $(eval $(call check-gcc-var,-mpreferred-stack-boundary=4))
348 OPTIMIZATION += $(CFLAG_-mpreferred-stack-boundary=4)
349 endif
351 # Choice of alignment (please document why!)
352 # -falign-labels: in-line labels
353 # (reachable by normal code flow, aligning will insert nops
354 # which will be executed - may even make things slower)
355 # -falign-jumps: reachable only by a jump
356 # Generic: no alignment at all (smallest code)
357 GCC_FALIGN=$(call check_gcc,-falign-functions=1 -falign-jumps=1 -falign-labels=1 -falign-loops=1,-malign-jumps=1 -malign-loops=1)
358 OPTIMIZATION+=$(GCC_FALIGN)
360 # Putting each function and data object into its own section
361 # allows for kbytes of less text if users link against static uclibc
362 # using ld --gc-sections.
363 # ld 2.18 can't do that (yet?) for shared libraries, so we itself
364 # do not use --gc-sections at shared lib link time.
365 # However, in combination with sections being sorted by alignment
366 # it does result in much reduced padding:
367 # text data bss dec hex
368 # 235319 1472 5992 242783 3b45f old.so
369 # 234104 1472 5980 241556 3af94 new.so
370 # Without -ffunction-sections, all functions will get aligned
371 # to 4 byte boundary by as/ld. This is arguably a bug in as.
372 # It specifies 4 byte align for .text even if not told to do so:
373 # Idx Name Size VMA LMA File off Algn
374 # 0 .text xxxxxxxx 00000000 00000000 xxxxxxxx 2**2 <===!
375 CPU_CFLAGS-y += $(CFLAG_-ffunction-sections) $(CFLAG_-fdata-sections)
376 CPU_LDFLAGS-y += $(CFLAG_-Wl--sort-common)
377 $(eval $(call check-ld-var,--sort-section=alignment))
378 CPU_LDFLAGS-y += $(CFLAG_-Wl--sort-section=alignment)
380 CPU_LDFLAGS-y+=-m32
381 CPU_CFLAGS-y+=-m32
382 endif
384 ifeq ($(TARGET_ARCH),sparc)
385 CPU_CFLAGS-$(CONFIG_SPARC_V7)+=-mcpu=v7
386 CPU_CFLAGS-$(CONFIG_SPARC_V8)+=-mcpu=v8
387 CPU_CFLAGS-$(CONFIG_SPARC_V9)+=-mcpu=v9
388 CPU_CFLAGS-$(CONFIG_SPARC_V9B)+=$(call check_gcc,-mcpu=v9b,-mcpu=ultrasparc)
389 endif
391 ifeq ($(TARGET_ARCH),arm)
392 CPU_CFLAGS-$(ARCH_LITTLE_ENDIAN)+=-mlittle-endian
393 CPU_CFLAGS-$(ARCH_BIG_ENDIAN)+=-mbig-endian
394 endif
396 ifeq ($(TARGET_ARCH),metag)
397 SYMBOL_PREFIX=_
398 CPU_CFLAGS-$(CONFIG_META_1_2)+=
399 CPU_CFLAGS-$(CONFIG_META_2_1)+=-Wa,-mcpu=metac21
400 endif
402 ifeq ($(TARGET_ARCH),mips)
403 OPTIMIZATION+=-mno-split-addresses
404 CPU_CFLAGS-$(CONFIG_MIPS_N64_ABI)+=-mabi=64
405 CPU_CFLAGS-$(CONFIG_MIPS_O32_ABI)+=-mabi=32
406 CPU_CFLAGS-$(CONFIG_MIPS_N32_ABI)+=-mabi=n32
407 CPU_CFLAGS-$(CONFIG_MIPS_NAN_LEGACY)+=$(call check_gcc,-mnan=legacy)
408 CPU_CFLAGS-$(CONFIG_MIPS_NAN_2008)+=$(call check_gcc,-mnan=2008)
409 CPU_LDFLAGS-y += $(CPU_CFLAGS)
410 endif
412 ifeq ($(TARGET_ARCH),nds32)
413 CPU_CFLAGS-$(CONFIG_NDS32_ISA)+=-march=nds32
414 CFLAGS-.os+= -DPIC
415 CFLAGS-.oS+= -DPIC
416 endif
418 ifeq ($(TARGET_ARCH),sh)
419 $(eval $(call check-gcc-var,-mprefergot))
420 OPTIMIZATION += $(CFLAG_-mprefergot)
421 CPU_CFLAGS-$(ARCH_LITTLE_ENDIAN)+=-ml
422 CPU_CFLAGS-$(ARCH_BIG_ENDIAN)+=-mb
423 CPU_CFLAGS-$(CONFIG_SH2)+=-m2
424 CPU_CFLAGS-$(CONFIG_SH3)+=-m3
425 ifeq ($(UCLIBC_HAS_FPU),y)
426 CPU_CFLAGS-$(CONFIG_SH2A)+=-m2a
427 CPU_CFLAGS-$(CONFIG_SH4)+=-m4
428 CPU_CFLAGS-$(CONFIG_SH4A)+=-m4a
429 else
430 CPU_CFLAGS-$(CONFIG_SH2A)+=-m2a-nofpu
431 CPU_CFLAGS-$(CONFIG_SH4)+=-m4-nofpu
432 CPU_CFLAGS-$(CONFIG_SH4A)+=-m4a-nofpu
433 endif
434 endif
436 ifeq ($(TARGET_ARCH),h8300)
437 CPU_CFLAGS-$(CONFIG_H8300H) += -mh -mint32
438 CPU_CFLAGS-$(CONFIG_H8S) += -ms -mint32
439 endif
441 ifeq ($(TARGET_ARCH),cris)
442 CPU_LDFLAGS-$(CONFIG_CRIS)+=-Wl,-mcrislinux
443 CPU_LDFLAGS-$(CONFIG_CRISV32)+=-Wl,-mcrislinux
444 CPU_CFLAGS-$(CONFIG_CRIS)+=-mlinux
445 PICFLAG:=-fpic
446 PIEFLAG_NAME:=-fpie
447 endif
449 ifeq ($(TARGET_ARCH),m68k)
450 # -fPIC is only supported for 68020 and above. It is not supported
451 # for 68000, 68010, or Coldfire.
452 PICFLAG:=-fpic
453 PIEFLAG_NAME:=-fpie
454 endif
456 ifeq ($(TARGET_ARCH),powerpc)
457 # PowerPC can hold 8192 entries in its GOT with -fpic which is more than
458 # enough. Therefore use -fpic which will reduce code size and generates
459 # faster code.
460 PICFLAG:=-fpic
461 PIEFLAG_NAME:=-fpie
462 PPC_HAS_REL16:=$(shell printf "\t.text\n\taddis 11,30,_GLOBAL_OFFSET_TABLE_-.@ha\n" | $(CC) -c -x assembler -o /dev/null - 2> /dev/null && echo -n y || echo -n n)
463 CPU_CFLAGS-$(PPC_HAS_REL16)+= -DHAVE_ASM_PPC_REL16
464 CPU_CFLAGS-$(CONFIG_E500) += "-D__NO_MATH_INLINES"
466 endif
468 ifeq ($(TARGET_ARCH),bfin)
469 SYMBOL_PREFIX=_
470 ifeq ($(UCLIBC_FORMAT_FDPIC_ELF),y)
471 CPU_CFLAGS-y:=-mfdpic
472 CPU_LDFLAGS-y += -Wl,-melf32bfinfd
473 PICFLAG:=-fpic
474 PIEFLAG_NAME:=-fpie
475 endif
476 ifeq ($(UCLIBC_FORMAT_SHARED_FLAT),y)
477 PICFLAG := -mleaf-id-shared-library
478 endif
479 endif
481 ifeq ($(TARGET_ARCH),frv)
482 # Using -pie causes the program to have an interpreter, which is
483 # forbidden, so we must make do with -shared. Unfortunately,
484 # -shared by itself would get us global function descriptors
485 # and calls through PLTs, dynamic resolution of symbols, etc,
486 # which would break as well, but -Bsymbolic comes to the rescue.
487 CPU_LDFLAGS-y += -Wl,-melf32frvfd -Wl,-Bsymbolic
488 endif
490 ifeq ($(strip $(TARGET_ARCH)),avr32)
491 CPU_CFLAGS-$(CONFIG_AVR32_AP7) += -march=ap
492 CPU_CFLAGS-$(CONFIG_LINKRELAX) += -mrelax
493 CPU_LDFLAGS-$(CONFIG_LINKRELAX) += --relax
494 endif
496 ifeq ($(TARGET_ARCH),c6x)
497 PIEFLAG:=
498 CPU_CFLAGS-$(CONFIG_TMS320C64X) += -march=c64x
499 CPU_CFLAGS-$(CONFIG_TMS320C64XPLUS) += -march=c64x+
500 CPU_CFLAGS-$(ARCH_LITTLE_ENDIAN)+=-mlittle-endian
501 CPU_CFLAGS-$(ARCH_BIG_ENDIAN)+=-mbig-endian
502 CPU_LDFLAGS-y += $(CPU_CFLAGS)
503 endif
505 ifeq ($(TARGET_ARCH),arc)
506 CPU_CFLAGS-$(CONFIG_ARC_CPU_700) += -mA7
507 CPU_CFLAGS-$(CONFIG_ARC_CPU_HS) += -mcpu=archs
508 CPU_LDFLAGS-y += $(CPU_CFLAGS) -marclinux
509 endif
511 $(eval $(call check-gcc-var,$(PIEFLAG_NAME)))
512 PIEFLAG := $(CFLAG_$(PIEFLAG_NAME))
513 ifeq ($(PIEFLAG),)
514 PIEFLAG := $(PICFLAG)
515 endif
516 # We need to keep track of both the CC PIE flag (above) as
517 # well as the LD PIE flag (below) because we can't rely on
518 # gcc passing -pie if we used -fPIE. We need to directly use -pie
519 # instead of -Wl,-pie as gcc picks up the wrong startfile/endfile
520 $(eval $(call cache-output-var,LDPIEFLAG,$(CC) -Wl$(comma)--help 2>/dev/null | grep -q -- -pie && echo "-pie"))
522 # Check for --as-needed support in linker
523 ifndef LD_FLAG_ASNEEDED
524 _LD_FLAG_ASNEEDED:=$(shell $(CC) -Wl,--help 2>/dev/null | grep -- --as-needed)
525 ifneq ($(_LD_FLAG_ASNEEDED),)
526 export LD_FLAG_ASNEEDED:=--as-needed
527 endif
528 endif
529 ifndef LD_FLAG_NO_ASNEEDED
530 ifdef LD_FLAG_ASNEEDED
531 export LD_FLAG_NO_ASNEEDED:=--no-as-needed
532 endif
533 endif
534 ifndef CC_FLAG_ASNEEDED
535 ifdef LD_FLAG_ASNEEDED
536 export CC_FLAG_ASNEEDED:=-Wl,$(LD_FLAG_ASNEEDED)
537 endif
538 endif
539 ifndef CC_FLAG_NO_ASNEEDED
540 ifdef LD_FLAG_NO_ASNEEDED
541 export CC_FLAG_NO_ASNEEDED:=-Wl,$(LD_FLAG_NO_ASNEEDED)
542 endif
543 endif
544 link.asneeded = $(if $(CC_FLAG_ASNEEDED),$(if $(CC_FLAG_NO_ASNEEDED),$(CC_FLAG_ASNEEDED) $(1) $(CC_FLAG_NO_ASNEEDED)))
546 # Check for AS_NEEDED support in linker script (binutils>=2.16.1 has it)
547 ifndef ASNEEDED
548 export ASNEEDED:=$(shell $(CC) -Wl,--help 2>/dev/null | grep -q -- --as-needed && echo "AS_NEEDED ( $(UCLIBC_LDSO) )" || echo "$(UCLIBC_LDSO)")
549 endif
551 # Add a bunch of extra pedantic annoyingly strict checks
552 WARNING_FLAGS = -Wstrict-prototypes -Wstrict-aliasing
553 ifeq ($(EXTRA_WARNINGS),y)
554 WARNING_FLAGS += \
555 -Wformat=2 \
556 -Wmissing-noreturn \
557 -Wmissing-format-attribute \
558 -Wmissing-prototypes \
559 -Wmissing-declarations \
560 -Wnested-externs \
561 -Wnonnull \
562 -Wold-style-declaration \
563 -Wold-style-definition \
564 -Wdeclaration-after-statement \
565 -Wshadow \
566 -Wundef
567 endif
568 WARNING_FLAGS += $(WARNING_FLAGS-gcc-$(GCC_MAJOR_VER))
569 $(foreach w,$(WARNING_FLAGS),$(eval $(call check-gcc-var,$(w))))
570 XWARNINGS = $(call qstrip,$(WARNINGS)) $(foreach w,$(WARNING_FLAGS),$(CFLAG_$(w)))
572 CPU_CFLAGS=$(call qstrip,$(CPU_CFLAGS-y))
574 # Save the tested flag in a single variable and force it to be
575 # evaluated just once. Then use that computed value.
576 $(eval $(call check-gcc-var,-fno-stack-protector))
577 SSP_DISABLE_FLAGS ?= $(CFLAG_-fno-stack-protector)
578 ifeq ($(UCLIBC_BUILD_SSP),y)
579 $(eval $(call check-gcc-var,-fno-stack-protector-all))
580 $(eval $(call check-gcc-var,-fstack-protector))
581 $(eval $(call check-gcc-var,-fstack-protector-all))
582 SSP_CFLAGS := $(CFLAG_-fno-stack-protector-all)
583 SSP_CFLAGS += $(CFLAG_-fstack-protector)
584 SSP_ALL_CFLAGS ?= $(CFLAG_-fstack-protector-all)
585 else
586 SSP_CFLAGS := $(SSP_DISABLE_FLAGS)
587 endif
589 # Collect all CFLAGS components
590 CFLAGS := $(XWARNINGS) $(CPU_CFLAGS) $(SSP_CFLAGS) \
591 -nostdinc -I$(top_builddir)include \
592 -I$(top_srcdir)include -include libc-symbols.h \
593 -I$(top_srcdir)libc/sysdeps/linux/$(TARGET_ARCH) \
594 -I$(top_srcdir)libc/sysdeps/linux \
595 -I$(top_srcdir)ldso/ldso/$(TARGET_ARCH) \
596 -I$(top_srcdir)ldso/include -I.
598 # We need this to be checked within libc-symbols.h
599 ifneq ($(HAVE_SHARED),y)
600 CFLAGS += -DSTATIC
601 endif
603 $(eval $(call check-ld-var,--warn-once))
604 $(eval $(call check-ld-var,--sort-common))
605 $(eval $(call check-ld-var,--discard-all))
606 LDFLAGS_NOSTRIP:=$(LDFLAG-fuse-ld) $(CPU_LDFLAGS-y) -shared \
607 -Wl,--warn-common $(CFLAG_-Wl--warn-once) -Wl,-z,combreloc
609 ifeq ($(UCLIBC_BUILD_RELRO),y)
610 LDFLAGS_NOSTRIP+=-Wl,-z,relro
611 endif
613 ifeq ($(UCLIBC_BUILD_NOW),y)
614 LDFLAGS_NOSTRIP+=-Wl,-z,now
615 endif
617 ifeq ($(LDSO_GNU_HASH_SUPPORT),y)
618 # Be sure that binutils support it
619 $(eval $(call check-ld-var,--hash-style=gnu))
620 ifeq ($(LDFLAG_--hash-style=gnu),)
621 ifneq ($(filter-out $(clean_targets) CLEAN_% install_headers headers-y,$(MAKECMDGOALS)),)
622 $(error Your binutils do not support --hash-style option, while you want to use it)
623 endif
624 else
625 LDFLAGS_NOSTRIP += $(CFLAG_-Wl--hash-style=gnu)
626 endif
627 endif
629 ifeq ($(DODEBUG),y)
630 CFLAGS += -O0 -g3 -DDEBUG
631 else
632 CFLAGS += $(OPTIMIZATION)
633 CFLAGS += $(OPTIMIZATION-$(GCC_MAJOR_VER))
634 CFLAGS += $(OPTIMIZATION-$(GCC_MAJOR_VER).$(GCC_MINOR_VER))
635 $(eval $(call check-ld-var,-O2))
636 LDFLAGS_NOSTRIP += $(CFLAG_-Wl-O2)
637 endif
639 LDFLAGS:=$(LDFLAGS_NOSTRIP) -Wl,-z,defs
641 ifeq ($(DOSTRIP),y)
642 LDFLAGS += -Wl,-s
643 else
644 STRIPTOOL := true -Stripping_disabled
645 endif
647 ifneq ($(strip $(UCLIBC_EXTRA_CFLAGS)),"")
648 CFLAGS += $(call qstrip,$(UCLIBC_EXTRA_CFLAGS))
649 endif
650 ifneq ($(strip $(UCLIBC_EXTRA_LDFLAGS)),"")
651 LDFLAGS += $(call qstrip,$(UCLIBC_EXTRA_LDFLAGS))
652 endif
654 ifeq ($(UCLIBC_HAS_STDIO_FUTEXES),y)
655 CFLAGS += -D__USE_STDIO_FUTEXES__
656 endif
658 ifeq ($(UCLIBC_HAS_THREADS),y)
659 ifeq ($(UCLIBC_HAS_THREADS_NATIVE),y)
660 PTNAME := nptl
661 CFLAGS += -DHAVE_FORCED_UNWIND -D_LIBC_REENTRANT
662 else
663 ifeq ($(UCLIBC_HAS_LINUXTHREADS),y)
664 PTNAME := linuxthreads
665 endif
666 endif
667 PTDIR := libpthread/$(PTNAME)
668 # set up system dependencies include dirs (NOTE: order matters!)
669 ifeq ($(UCLIBC_HAS_THREADS_NATIVE),y)
670 PTINC:= -I$(top_builddir)$(PTDIR) \
671 -I$(top_srcdir)$(PTDIR) \
672 $(if $(TARGET_SUBARCH),-I$(top_srcdir)$(PTDIR)/sysdeps/unix/sysv/linux/$(TARGET_ARCH)/$(TARGET_SUBARCH)) \
673 -I$(top_srcdir)$(PTDIR)/sysdeps/unix/sysv/linux/$(TARGET_ARCH) \
674 -I$(top_builddir)$(PTDIR)/sysdeps/$(TARGET_ARCH) \
675 -I$(top_srcdir)$(PTDIR)/sysdeps/$(TARGET_ARCH) \
676 -I$(top_builddir)$(PTDIR)/sysdeps/unix/sysv/linux \
677 -I$(top_srcdir)$(PTDIR)/sysdeps/unix/sysv/linux \
678 -I$(top_srcdir)$(PTDIR)/sysdeps/pthread \
679 -I$(top_srcdir)$(PTDIR)/sysdeps/pthread/bits \
680 -I$(top_srcdir)$(PTDIR)/sysdeps/generic
682 # Test for TLS if NPTL support was selected.
684 GCC_HAS_TLS=$(shell \
685 echo "extern __thread int foo;" | $(CC) -o /dev/null -S -xc - 2>&1)
686 ifneq ($(GCC_HAS_TLS),)
687 gcc_tls_test_fail:
688 @echo "####";
689 @echo "#### Your compiler does not support TLS and you are trying to build uClibc";
690 @echo "#### with NPTL support. Upgrade your binutils and gcc to versions which";
691 @echo "#### support TLS for your architecture. Do not contact uClibc maintainers";
692 @echo "#### about this problem.";
693 @echo "####";
694 @echo "#### Exiting...";
695 @echo "####";
696 @exit 1;
697 endif
698 else
699 PTINC := \
700 -I$(top_srcdir)$(PTDIR)/sysdeps/unix/sysv/linux/$(TARGET_ARCH) \
701 -I$(top_srcdir)$(PTDIR)/sysdeps/$(TARGET_ARCH) \
702 -I$(top_srcdir)$(PTDIR)/sysdeps/unix/sysv/linux \
703 -I$(top_srcdir)$(PTDIR)/sysdeps/pthread \
704 -I$(top_srcdir)$(PTDIR) \
705 -I$(top_srcdir)libpthread
706 endif
707 CFLAGS+=$(PTINC)
708 else
709 PTNAME :=
710 PTINC :=
711 endif
712 CFLAGS += -I$(top_srcdir)libc/sysdeps/linux/common
714 #CFLAGS += -iwithprefix include-fixed -iwithprefix include
715 $(eval $(call cache-output-var,CC_IPREFIX,$(CC) -print-file-name=include))
716 CC_INC := -isystem $(dir $(CC_IPREFIX))include-fixed -isystem $(CC_IPREFIX)
717 CFLAGS += $(CC_INC)
719 CFLAGS += -I$(KERNEL_HEADERS)
721 ifneq ($(DOASSERTS),y)
722 CFLAGS+=-DNDEBUG
723 endif
725 ifeq ($(SYMBOL_PREFIX),_)
726 CFLAGS+=-D__UCLIBC_UNDERSCORES__
727 endif
729 # Keep the check_as from being needlessly executed
730 ifeq ($(UCLIBC_BUILD_NOEXECSTACK),y)
731 $(eval $(call check-as-var,--noexecstack))
732 endif
733 ASFLAGS += $(ASFLAG_--noexecstack)
735 LIBGCC_CFLAGS ?= $(CFLAGS) $(CPU_CFLAGS-y)
736 $(eval $(call cache-output-var,LIBGCC_A,$(CC) $(LIBGCC_CFLAGS) -print-libgcc-file-name))
737 $(eval $(call cache-output-var,LIBGCC_EH,$(CC) $(LIBGCC_CFLAGS) -print-file-name=libgcc_eh.a))
738 # with -O0 we (e.g. lockf) might end up with references to
739 # _Unwind_Resume, so pull in gcc_eh in this case..
740 # with a --disable-shared toolchain, libgcc_eh.a and libgcc.a are combined
741 # in libgcc.a, so check if the printed file exist, before adding to the commandline
742 LIBGCC_EH_FILE := $(shell if [ -f $(LIBGCC_EH) ]; then echo $(LIBGCC_EH); fi)
743 LIBGCC_DIR := $(dir $(LIBGCC_A))
744 LIBGCC := $(LIBGCC_A) $(if $(DODEBUG),$(LIBGCC_EH_FILE))
746 # moved from libpthread/linuxthreads
747 ifeq ($(UCLIBC_CTOR_DTOR),y)
748 SHARED_START_FILES:=$(top_builddir)lib/crti.o $(LIBGCC_DIR)crtbeginS.o
749 SHARED_END_FILES:=$(LIBGCC_DIR)crtendS.o $(top_builddir)lib/crtn.o
750 endif
752 LOCAL_INSTALL_PATH := $(if $(O),$(O)/)install_dir
754 PTHREAD_GENERATE_MANGLE ?= -n "s/^.*@@@name@@@\([^@]*\)@@@value@@@[^0-9Xxa-fA-F-]*\([0-9Xxa-fA-F-][0-9Xxa-fA-F-]*\).*@@@end@@@.*\$$/\#define \1 \2/p"