Added support for the Hynix HY27US08121A 64MB Flash chip.
[u-boot-openmoko/mini2440.git] / drivers / net / cs8900.c
blob55ef346340e1f53518c6001b1e2819ecd9e1a085
1 /*
2 * Cirrus Logic CS8900A Ethernet
4 * (C) 2003 Wolfgang Denk, wd@denx.de
5 * Extension to synchronize ethaddr environment variable
6 * against value in EEPROM
8 * (C) Copyright 2002
9 * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
10 * Marius Groeger <mgroeger@sysgo.de>
12 * Copyright (C) 1999 Ben Williamson <benw@pobox.com>
14 * See file CREDITS for list of people who contributed to this
15 * project.
17 * This program is loaded into SRAM in bootstrap mode, where it waits
18 * for commands on UART1 to read and write memory, jump to code etc.
19 * A design goal for this program is to be entirely independent of the
20 * target board. Anything with a CL-PS7111 or EP7211 should be able to run
21 * this code in bootstrap mode. All the board specifics can be handled on
22 * the host.
24 * This program is free software; you can redistribute it and/or modify
25 * it under the terms of the GNU General Public License as published by
26 * the Free Software Foundation; either version 2 of the License, or
27 * (at your option) any later version.
29 * This program is distributed in the hope that it will be useful,
30 * but WITHOUT ANY WARRANTY; without even the implied warranty of
31 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
32 * GNU General Public License for more details.
34 * You should have received a copy of the GNU General Public License
35 * along with this program; if not, write to the Free Software
36 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
39 #include <common.h>
40 #include <command.h>
41 #include "cs8900.h"
42 #include <net.h>
44 #ifdef CONFIG_DRIVER_CS8900
46 #if defined(CONFIG_CMD_NET)
48 #undef DEBUG
50 /* packet page register access functions */
52 #ifdef CS8900_BUS32
53 /* we don't need 16 bit initialisation on 32 bit bus */
54 #define get_reg_init_bus(x) get_reg((x))
55 #else
56 static unsigned short get_reg_init_bus (int regno)
58 /* force 16 bit busmode */
59 volatile unsigned char c;
61 c = CS8900_BUS16_0;
62 c = CS8900_BUS16_1;
63 c = CS8900_BUS16_0;
64 c = CS8900_BUS16_1;
65 c = CS8900_BUS16_0;
67 CS8900_PPTR = regno;
68 return (unsigned short) CS8900_PDATA;
70 #endif
72 static unsigned short get_reg (int regno)
74 CS8900_PPTR = regno;
75 return (unsigned short) CS8900_PDATA;
79 static void put_reg (int regno, unsigned short val)
81 CS8900_PPTR = regno;
82 CS8900_PDATA = val;
85 static void eth_reset (void)
87 int tmo;
88 unsigned short us;
90 /* reset NIC */
91 put_reg (PP_SelfCTL, get_reg (PP_SelfCTL) | PP_SelfCTL_Reset);
93 /* wait for 200ms */
94 udelay (200000);
95 /* Wait until the chip is reset */
97 tmo = get_timer (0) + 1 * CFG_HZ;
98 while ((((us = get_reg_init_bus (PP_SelfSTAT)) & PP_SelfSTAT_InitD) == 0)
99 && tmo < get_timer (0))
100 /*NOP*/;
103 static void eth_reginit (void)
105 /* receive only error free packets addressed to this card */
106 put_reg (PP_RxCTL, PP_RxCTL_IA | PP_RxCTL_Broadcast | PP_RxCTL_RxOK);
107 /* do not generate any interrupts on receive operations */
108 put_reg (PP_RxCFG, 0);
109 /* do not generate any interrupts on transmit operations */
110 put_reg (PP_TxCFG, 0);
111 /* do not generate any interrupts on buffer operations */
112 put_reg (PP_BufCFG, 0);
113 /* enable transmitter/receiver mode */
114 put_reg (PP_LineCTL, PP_LineCTL_Rx | PP_LineCTL_Tx);
117 void cs8900_get_enetaddr (uchar * addr)
119 int i;
120 unsigned char env_enetaddr[6];
121 char *tmp = getenv ("ethaddr");
122 char *end;
124 for (i=0; i<6; i++) {
125 env_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
126 if (tmp)
127 tmp = (*end) ? end+1 : end;
130 /* verify chip id */
131 if (get_reg_init_bus (PP_ChipID) != 0x630e)
132 return;
133 eth_reset ();
134 if ((get_reg (PP_SelfST) & (PP_SelfSTAT_EEPROM | PP_SelfSTAT_EEPROM_OK)) ==
135 (PP_SelfSTAT_EEPROM | PP_SelfSTAT_EEPROM_OK)) {
137 /* Load the MAC from EEPROM */
138 for (i = 0; i < 6 / 2; i++) {
139 unsigned int Addr;
141 Addr = get_reg (PP_IA + i * 2);
142 addr[i * 2] = Addr & 0xFF;
143 addr[i * 2 + 1] = Addr >> 8;
146 if (memcmp(env_enetaddr, "\0\0\0\0\0\0", 6) != 0 &&
147 memcmp(env_enetaddr, addr, 6) != 0) {
148 printf ("\nWarning: MAC addresses don't match:\n");
149 printf ("\tHW MAC address: "
150 "%02X:%02X:%02X:%02X:%02X:%02X\n",
151 addr[0], addr[1],
152 addr[2], addr[3],
153 addr[4], addr[5] );
154 printf ("\t\"ethaddr\" value: "
155 "%02X:%02X:%02X:%02X:%02X:%02X\n",
156 env_enetaddr[0], env_enetaddr[1],
157 env_enetaddr[2], env_enetaddr[3],
158 env_enetaddr[4], env_enetaddr[5]) ;
159 debug ("### Set MAC addr from environment\n");
160 memcpy (addr, env_enetaddr, 6);
162 if (!tmp) {
163 char ethaddr[20];
164 sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
165 addr[0], addr[1],
166 addr[2], addr[3],
167 addr[4], addr[5]) ;
168 debug ("### Set environment from HW MAC addr = \"%s\"\n", ethaddr);
169 setenv ("ethaddr", ethaddr);
175 void eth_halt (void)
177 /* disable transmitter/receiver mode */
178 put_reg (PP_LineCTL, 0);
180 /* "shutdown" to show ChipID or kernel wouldn't find he cs8900 ... */
181 get_reg_init_bus (PP_ChipID);
184 int eth_init (bd_t * bd)
187 /* verify chip id */
188 if (get_reg_init_bus (PP_ChipID) != 0x630e) {
189 printf ("CS8900 Ethernet chip not found?!\n");
190 return 0;
193 eth_reset ();
194 /* set the ethernet address */
195 put_reg (PP_IA + 0, bd->bi_enetaddr[0] | (bd->bi_enetaddr[1] << 8));
196 put_reg (PP_IA + 2, bd->bi_enetaddr[2] | (bd->bi_enetaddr[3] << 8));
197 put_reg (PP_IA + 4, bd->bi_enetaddr[4] | (bd->bi_enetaddr[5] << 8));
199 eth_reginit ();
200 return 0;
203 /* Get a data block via Ethernet */
204 extern int eth_rx (void)
206 int i;
207 unsigned short rxlen;
208 unsigned short *addr;
209 unsigned short status;
211 status = get_reg (PP_RER);
213 if ((status & PP_RER_RxOK) == 0)
214 return 0;
216 status = CS8900_RTDATA; /* stat */
217 rxlen = CS8900_RTDATA; /* len */
219 #ifdef DEBUG
220 if (rxlen > PKTSIZE_ALIGN + PKTALIGN)
221 printf ("packet too big!\n");
222 #endif
223 for (addr = (unsigned short *) NetRxPackets[0], i = rxlen >> 1; i > 0;
224 i--)
225 *addr++ = CS8900_RTDATA;
226 if (rxlen & 1)
227 *addr++ = CS8900_RTDATA;
229 /* Pass the packet up to the protocol layers. */
230 NetReceive (NetRxPackets[0], rxlen);
232 return rxlen;
235 /* Send a data block via Ethernet. */
236 extern int eth_send (volatile void *packet, int length)
238 volatile unsigned short *addr;
239 int tmo;
240 unsigned short s;
242 retry:
243 /* initiate a transmit sequence */
244 CS8900_TxCMD = PP_TxCmd_TxStart_Full;
245 CS8900_TxLEN = length;
247 /* Test to see if the chip has allocated memory for the packet */
248 if ((get_reg (PP_BusSTAT) & PP_BusSTAT_TxRDY) == 0) {
249 /* Oops... this should not happen! */
250 #ifdef DEBUG
251 printf ("cs: unable to send packet; retrying...\n");
252 #endif
253 for (tmo = get_timer (0) + 5 * CFG_HZ; get_timer (0) < tmo;)
254 /*NOP*/;
255 eth_reset ();
256 eth_reginit ();
257 goto retry;
260 /* Write the contents of the packet */
261 /* assume even number of bytes */
262 for (addr = packet; length > 0; length -= 2)
263 CS8900_RTDATA = *addr++;
265 /* wait for transfer to succeed */
266 tmo = get_timer (0) + 5 * CFG_HZ;
267 while ((s = get_reg (PP_TER) & ~0x1F) == 0) {
268 if (get_timer (0) >= tmo)
269 break;
272 /* nothing */ ;
273 if ((s & (PP_TER_CRS | PP_TER_TxOK)) != PP_TER_TxOK) {
274 #ifdef DEBUG
275 printf ("\ntransmission error %#x\n", s);
276 #endif
279 return 0;
282 static void cs8900_e2prom_ready(void)
284 while(get_reg(PP_SelfST) & SI_BUSY);
287 /***********************************************************/
288 /* read a 16-bit word out of the EEPROM */
289 /***********************************************************/
291 int cs8900_e2prom_read(unsigned char addr, unsigned short *value)
293 cs8900_e2prom_ready();
294 put_reg(PP_EECMD, EEPROM_READ_CMD | addr);
295 cs8900_e2prom_ready();
296 *value = get_reg(PP_EEData);
298 return 0;
302 /***********************************************************/
303 /* write a 16-bit word into the EEPROM */
304 /***********************************************************/
306 int cs8900_e2prom_write(unsigned char addr, unsigned short value)
308 cs8900_e2prom_ready();
309 put_reg(PP_EECMD, EEPROM_WRITE_EN);
310 cs8900_e2prom_ready();
311 put_reg(PP_EEData, value);
312 put_reg(PP_EECMD, EEPROM_WRITE_CMD | addr);
313 cs8900_e2prom_ready();
314 put_reg(PP_EECMD, EEPROM_WRITE_DIS);
315 cs8900_e2prom_ready();
317 return 0;
320 #endif /* CONFIG_CMD_NET */
322 #endif /* CONFIG_DRIVER_CS8900 */