include/configs/sbc8560.h

   1 /*
   2  * (C) Copyright 2002,2003 Motorola,Inc.
   3  * Xianghua Xiao <X.Xiao@motorola.com>
   4  *
   5  * (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>.
   6  * Added support for Wind River SBC8560 board
   7  *
   8  * See file CREDITS for list of people who contributed to this
   9  * project.
  10  *
  11  * This program is free software; you can redistribute it and/or
  12  * modify it under the terms of the GNU General Public License as
  13  * published by the Free Software Foundation; either version 2 of
  14  * the License, or (at your option) any later version.
  15  *
  16  * This program is distributed in the hope that it will be useful,
  17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  * GNU General Public License for more details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program; if not, write to the Free Software
  23  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  24  * MA 02111-1307 USA
  25  */
  26
  27 /* mpc8560ads board configuration file */
  28 /* please refer to doc/README.mpc85xx for more info */
  29 /* make sure you change the MAC address and other network params first,
  30  * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
  31  */
  32
  33 #ifndef __CONFIG_H
  34 #define __CONFIG_H
  35
  36 /* High Level Configuration Options */
  37 #define CONFIG_BOOKE            1       /* BOOKE                        */
  38 #define CONFIG_E500             1       /* BOOKE e500 family            */
  39 #define CONFIG_MPC85xx          1       /* MPC8540/MPC8560              */
  40 #define CONFIG_MPC85xx_REV1     1       /* MPC85xx Rev 1.0 chip         */
  41
  42
  43 #define CONFIG_CPM2             1       /* has CPM2 */
  44 #define CONFIG_SBC8560          1       /* configuration for SBC8560 board */
  45
  46 /* XXX flagging this as something I might want to delete */
  47 #define CONFIG_MPC8560ADS       1       /* MPC8560ADS board specific    */
  48
  49 #define CONFIG_TSEC_ENET                /* tsec ethernet support        */
  50 #undef  CONFIG_PCI                      /* pci ethernet support         */
  51 #undef  CONFIG_ETHER_ON_FCC             /* cpm FCC ethernet support     */
  52
  53 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
  54
  55 #define CONFIG_ENV_OVERWRITE
  56
  57 /* Using Localbus SDRAM to emulate flash before we can program the flash,
  58  * normally you need a flash-boot image(u-boot.bin), if so undef this.
  59  */
  60 #undef CONFIG_RAM_AS_FLASH
  61
  62 #if defined(CONFIG_PCI_66)              /* some PCI card is 33Mhz only  */
  63   #define CONFIG_SYS_CLK_FREQ   66000000/* sysclk for MPC85xx           */
  64 #else
  65   #define CONFIG_SYS_CLK_FREQ   33000000/* most pci cards are 33Mhz     */
  66 #endif
  67
  68 /* below can be toggled for performance analysis. otherwise use default */
  69 #define CONFIG_L2_CACHE                     /* toggle L2 cache          */
  70 #undef  CONFIG_BTB                          /* toggle branch predition  */
  71 #undef  CONFIG_ADDR_STREAMING               /* toggle addr streaming    */
  72
  73 #define CONFIG_BOARD_EARLY_INIT_F 1         /* Call board_early_init_f  */
  74
  75 #undef  CFG_DRAM_TEST                       /* memory test, takes time  */
  76 #define CFG_MEMTEST_START       0x00200000  /* memtest region */
  77 #define CFG_MEMTEST_END         0x00400000
  78
  79 #if (defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET) || \
  80      defined(CONFIG_PCI) && defined(CONFIG_ETHER_ON_FCC) || \
  81      defined(CONFIG_TSEC_ENET) && defined(CONFIG_ETHER_ON_FCC))
  82 #error "You can only use ONE of PCI Ethernet Card or TSEC Ethernet or CPM FCC."
  83 #endif
  84
  85 /*
  86  * Base addresses -- Note these are effective addresses where the
  87  * actual resources get mapped (not physical addresses)
  88  */
  89 #define CFG_CCSRBAR_DEFAULT     0xff700000      /* CCSRBAR Default      */
  90
  91 #if XXX
  92   #define CFG_CCSRBAR           0xfdf00000      /* relocated CCSRBAR    */
  93 #else
  94   #define CFG_CCSRBAR           0xff700000      /* default CCSRBAR      */
  95 #endif
  96 #define CFG_CCSRBAR_PHYS        CFG_CCSRBAR     /* physical addr of CCSRBAR */
  97 #define CFG_IMMR                CFG_CCSRBAR     /* PQII uses CFG_IMMR   */
  98
  99 #define CFG_DDR_SDRAM_BASE      0x00000000      /* DDR is system memory  */
 100 #define CFG_SDRAM_BASE          CFG_DDR_SDRAM_BASE
 101 #define CFG_SDRAM_SIZE          512             /* DDR is 512MB */
 102 #define SPD_EEPROM_ADDRESS      0x55            /*  DDR DIMM */
 103
 104 #undef  CONFIG_DDR_ECC                          /* only for ECC DDR module      */
 105 #undef  CONFIG_SPD_EEPROM                       /* Use SPD EEPROM for DDR setup */
 106
 107 #if defined(CONFIG_MPC85xx_REV1)
 108   #define CONFIG_DDR_DLL                        /* possible DLL fix needed      */
 109 #endif
 110
 111 #undef CONFIG_CLOCKS_IN_MHZ
 112
 113 #if defined(CONFIG_RAM_AS_FLASH)
 114   #define CFG_LBC_SDRAM_BASE    0xfc000000      /* Localbus SDRAM */
 115   #define CFG_FLASH_BASE        0xf8000000      /* start of FLASH 8M  */
 116   #define CFG_BR0_PRELIM        0xf8000801      /* port size 8bit */
 117   #define CFG_OR0_PRELIM        0xf8000ff7      /* 8MB Flash            */
 118 #else /* Boot from real Flash */
 119   #define CFG_LBC_SDRAM_BASE    0xf8000000      /* Localbus SDRAM */
 120   #define CFG_FLASH_BASE        0xff800000      /* start of FLASH 8M    */
 121   #define CFG_BR0_PRELIM        0xff800801      /* port size 8bit      */
 122   #define CFG_OR0_PRELIM        0xff800ff7      /* 8MB Flash            */
 123 #endif
 124 #define CFG_LBC_SDRAM_SIZE      64              /* LBC SDRAM is 64MB    */
 125
 126 /* local bus definitions */
 127 #define CFG_BR1_PRELIM          0xe4001801      /* 64M, 32-bit flash */
 128 #define CFG_OR1_PRELIM          0xfc000ff7
 129
 130 #define CFG_BR2_PRELIM          0x00000000      /* CS2 not used */
 131 #define CFG_OR2_PRELIM          0x00000000
 132
 133 #define CFG_BR3_PRELIM          0xf0001861      /* 64MB localbus SDRAM  */
 134 #define CFG_OR3_PRELIM          0xfc000cc1
 135
 136 #if defined(CONFIG_RAM_AS_FLASH)
 137   #define CFG_BR4_PRELIM        0xf4001861      /* 64M localbus SDRAM */
 138 #else
 139   #define CFG_BR4_PRELIM        0xf8001861      /* 64M localbus SDRAM */
 140 #endif
 141 #define CFG_OR4_PRELIM          0xfc000cc1
 142
 143 #define CFG_BR5_PRELIM          0xfc000801      /* 16M CS5 misc devices */
 144 #if 1
 145   #define CFG_OR5_PRELIM        0xff000ff7
 146 #else
 147   #define CFG_OR5_PRELIM        0xff0000f0
 148 #endif
 149
 150 #define CFG_BR6_PRELIM          0xe0001801      /* 64M, 32-bit flash */
 151 #define CFG_OR6_PRELIM          0xfc000ff7
 152 #define CFG_LBC_LCRR            0x00030002      /* local bus freq       */
 153 #define CFG_LBC_LBCR            0x00000000
 154 #define CFG_LBC_LSRT            0x20000000
 155 #define CFG_LBC_MRTPR           0x20000000
 156 #define CFG_LBC_LSDMR_1         0x2861b723
 157 #define CFG_LBC_LSDMR_2         0x0861b723
 158 #define CFG_LBC_LSDMR_3         0x0861b723
 159 #define CFG_LBC_LSDMR_4         0x1861b723
 160 #define CFG_LBC_LSDMR_5         0x4061b723
 161
 162 /* just hijack the MOT BCSR def for SBC8560 misc devices */
 163 #define CFG_BCSR                ((CFG_BR5_PRELIM & 0xff000000)|0x00400000)
 164 /* the size of CS5 needs to be >= 16M for TLB and LAW setups */
 165
 166 #define CONFIG_L1_INIT_RAM
 167 #define CFG_INIT_RAM_LOCK       1
 168 #define CFG_INIT_RAM_ADDR       0x70000000      /* Initial RAM address  */
 169 #define CFG_INIT_RAM_END        0x4000          /* End of used area in RAM */
 170
 171 #define CFG_GBL_DATA_SIZE       128             /* num bytes initial data */
 172 #define CFG_GBL_DATA_OFFSET     (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 173 #define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
 174
 175 #define CFG_MONITOR_LEN         (256 * 1024)    /* Reserve 256 kB for Mon */
 176 #define CFG_MALLOC_LEN          (128 * 1024)    /* Reserved for malloc */
 177
 178 /* Serial Port */
 179 #undef  CONFIG_CONS_ON_SCC                      /* define if console on SCC */
 180 #undef  CONFIG_CONS_NONE                        /* define if console on something else */
 181
 182 #define CONFIG_CONS_INDEX       1
 183 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 184 #define CFG_NS16550
 185 #define CFG_NS16550_SERIAL
 186 #define CFG_NS16550_REG_SIZE    1
 187 #define CFG_NS16550_CLK         1843200 /* get_bus_freq(0) */
 188 #define CONFIG_BAUDRATE         9600
 189
 190 #define CFG_BAUDRATE_TABLE  \
 191         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 192
 193 #define CFG_NS16550_COM1        ((CFG_BR5_PRELIM & 0xff000000)+0x00700000)
 194 #define CFG_NS16550_COM2        ((CFG_BR5_PRELIM & 0xff000000)+0x00800000)
 195
 196 /* Use the HUSH parser */
 197 #define CFG_HUSH_PARSER
 198 #ifdef  CFG_HUSH_PARSER
 199 #define CFG_PROMPT_HUSH_PS2 "> "
 200 #endif
 201
 202 /*
 203  * I2C
 204  */
 205 #define CONFIG_FSL_I2C          /* Use FSL common I2C driver */
 206 #define CONFIG_HARD_I2C         /* I2C with hardware support*/
 207 #undef  CONFIG_SOFT_I2C                 /* I2C bit-banged */
 208 #define CFG_I2C_SPEED           400000  /* I2C speed and slave address  */
 209 #define CFG_I2C_SLAVE           0x7F
 210 #define CFG_I2C_NOPROBES        {0x69}  /* Don't probe these addrs */
 211 #define CFG_I2C_OFFSET          0x3000
 212
 213 #define CFG_PCI_MEM_BASE        0xC0000000
 214 #define CFG_PCI_MEM_PHYS        0xC0000000
 215 #define CFG_PCI_MEM_SIZE        0x10000000
 216
 217 #if defined(CONFIG_TSEC_ENET)           /* TSEC Ethernet port */
 218
 219 #  define CONFIG_NET_MULTI      1
 220 #  define CONFIG_MII            1       /* MII PHY management           */
 221 #  define CONFIG_MPC85xx_TSEC1
 222 #  define CONFIG_MPC85xx_TSEC1_NAME     "TSEC0"
 223 #  define TSEC1_PHY_ADDR        25
 224 #  define TSEC1_PHYIDX          0
 225 /* Options are: TSEC0 */
 226 #  define CONFIG_ETHPRIME               "TSEC0"
 227
 228 #elif defined(CONFIG_ETHER_ON_FCC)      /* CPM FCC Ethernet */
 229
 230   #undef  CONFIG_ETHER_NONE             /* define if ether on something else */
 231   #define CONFIG_ETHER_ON_FCC2          /* cpm FCC ethernet support     */
 232   #define CONFIG_ETHER_INDEX    2       /* which channel for ether  */
 233
 234   #if (CONFIG_ETHER_INDEX == 2)
 235     /*
 236      * - Rx-CLK is CLK13
 237      * - Tx-CLK is CLK14
 238      * - Select bus for bd/buffers
 239      * - Full duplex
 240      */
 241     #define CFG_CMXFCR_MASK     (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
 242     #define CFG_CMXFCR_VALUE    (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
 243     #define CFG_CPMFCR_RAMTYPE  0
 244     #define CFG_FCC_PSMR        (FCC_PSMR_FDE)
 245
 246   #elif (CONFIG_ETHER_INDEX == 3)
 247     /* need more definitions here for FE3 */
 248   #endif                                /* CONFIG_ETHER_INDEX */
 249
 250   #define CONFIG_MII                    /* MII PHY management */
 251   #define CONFIG_BITBANGMII             /* bit-bang MII PHY management  */
 252   /*
 253    * GPIO pins used for bit-banged MII communications
 254    */
 255   #define MDIO_PORT     2               /* Port C */
 256   #define MDIO_ACTIVE   (iop->pdir |=  0x00400000)
 257   #define MDIO_TRISTATE (iop->pdir &= ~0x00400000)
 258   #define MDIO_READ     ((iop->pdat &  0x00400000) != 0)
 259
 260   #define MDIO(bit)     if(bit) iop->pdat |=  0x00400000; \
 261                         else    iop->pdat &= ~0x00400000
 262
 263   #define MDC(bit)      if(bit) iop->pdat |=  0x00200000; \
 264                         else    iop->pdat &= ~0x00200000
 265
 266   #define MIIDELAY      udelay(1)
 267
 268 #endif
 269
 270 /*-----------------------------------------------------------------------
 271  * FLASH and environment organization
 272  */
 273
 274 #define CFG_FLASH_CFI           1       /* Flash is CFI conformant              */
 275 #define CFG_FLASH_CFI_DRIVER    1       /* Use the common driver                */
 276 #if 0
 277 #define CFG_FLASH_USE_BUFFER_WRITE 1    /* use buffered writes (20x faster)     */
 278 #define CFG_FLASH_PROTECTION            /* use hardware protection              */
 279 #endif
 280 #define CFG_MAX_FLASH_SECT      64      /* max number of sectors on one chip    */
 281 #define CFG_MAX_FLASH_BANKS     1       /* max number of memory banks           */
 282
 283 #undef  CFG_FLASH_CHECKSUM
 284 #define CFG_FLASH_ERASE_TOUT    200000          /* Timeout for Flash Erase (in ms)      */
 285 #define CFG_FLASH_WRITE_TOUT    50000           /* Timeout for Flash Write (in ms)      */
 286
 287 #define CFG_MONITOR_BASE        TEXT_BASE       /* start of monitor     */
 288
 289 #if 0
 290 /* XXX This doesn't work and I don't want to fix it */
 291 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
 292   #define CFG_RAMBOOT
 293 #else
 294   #undef  CFG_RAMBOOT
 295 #endif
 296 #endif
 297
 298 /* Environment */
 299 #if !defined(CFG_RAMBOOT)
 300   #if defined(CONFIG_RAM_AS_FLASH)
 301     #define CFG_ENV_IS_NOWHERE
 302     #define CFG_ENV_ADDR        (CFG_FLASH_BASE + 0x100000)
 303     #define CFG_ENV_SIZE        0x2000
 304   #else
 305     #define CFG_ENV_IS_IN_FLASH 1
 306     #define CFG_ENV_SECT_SIZE   0x20000 /* 128K(one sector) for env */
 307     #define CFG_ENV_ADDR        (CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE)
 308     #define CFG_ENV_SIZE        0x2000 /* CFG_ENV_SECT_SIZE */
 309   #endif
 310 #else
 311   #define CFG_NO_FLASH          1       /* Flash is not usable now      */
 312   #define CFG_ENV_IS_NOWHERE    1       /* Store ENV in memory only     */
 313   #define CFG_ENV_ADDR          (CFG_MONITOR_BASE - 0x1000)
 314   #define CFG_ENV_SIZE          0x2000
 315 #endif
 316
 317 #define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=192.168.0.251:/tftpboot ip=192.168.0.105:192.168.0.251::255.255.255.0:sbc8560:eth0:off console=ttyS0,9600"
 318 /*#define CONFIG_BOOTARGS      "root=/dev/ram rw console=ttyS0,115200"*/
 319 #define CONFIG_BOOTCOMMAND      "bootm 0xff800000 0xffa00000"
 320 #define CONFIG_BOOTDELAY        5       /* -1 disable autoboot */
 321
 322 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
 323 #define CFG_LOADS_BAUD_CHANGE   1       /* allow baudrate change        */
 324
 325
 326 /*
 327  * BOOTP options
 328  */
 329 #define CONFIG_BOOTP_BOOTFILESIZE
 330 #define CONFIG_BOOTP_BOOTPATH
 331 #define CONFIG_BOOTP_GATEWAY
 332 #define CONFIG_BOOTP_HOSTNAME
 333
 334
 335 /*
 336  * Command line configuration.
 337  */
 338 #include <config_cmd_default.h>
 339
 340 #define CONFIG_CMD_PING
 341 #define CONFIG_CMD_I2C
 342
 343 #if defined(CONFIG_PCI)
 344     #define CONFIG_CMD_PCI
 345 #endif
 346
 347 #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
 348     #define CONFIG_CMD_MII
 349 #endif
 350
 351 #if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
 352     #undef CONFIG_CMD_ENV
 353     #undef CONFIG_CMD_LOADS
 354 #endif
 355
 356
 357 #undef CONFIG_WATCHDOG                  /* watchdog disabled            */
 358
 359 /*
 360  * Miscellaneous configurable options
 361  */
 362 #define CFG_LONGHELP                    /* undef to save memory         */
 363 #define CFG_PROMPT      "SBC8560=> " /* Monitor Command Prompt  */
 364 #if defined(CONFIG_CMD_KGDB)
 365   #define CFG_CBSIZE    1024            /* Console I/O Buffer Size      */
 366 #else
 367   #define CFG_CBSIZE    256             /* Console I/O Buffer Size      */
 368 #endif
 369 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 370 #define CFG_MAXARGS     16              /* max number of command args   */
 371 #define CFG_BARGSIZE    CFG_CBSIZE      /* Boot Argument Buffer Size    */
 372 #define CFG_LOAD_ADDR   0x1000000       /* default load address */
 373 #define CFG_HZ          1000            /* decrementer freq: 1 ms ticks */
 374
 375 /*
 376  * For booting Linux, the board info and command line data
 377  * have to be in the first 8 MB of memory, since this is
 378  * the maximum mapped by the Linux kernel during initialization.
 379  */
 380 #define CFG_BOOTMAPSZ           (8 << 20) /* Initial Memory map for Linux */
 381
 382 /*
 383  * Internal Definitions
 384  *
 385  * Boot Flags
 386  */
 387 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH */
 388 #define BOOTFLAG_WARM   0x02            /* Software reboot              */
 389
 390 #if defined(CONFIG_CMD_KGDB)
 391   #define CONFIG_KGDB_BAUDRATE  230400  /* speed to run kgdb serial port */
 392   #define CONFIG_KGDB_SER_INDEX 2       /* which serial port to use */
 393 #endif
 394
 395 /*Note: change below for your network setting!!! */
 396 #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
 397 #  define CONFIG_ETHADDR        00:01:af:07:9b:8a
 398 #  define CONFIG_HAS_ETH1
 399 #  define CONFIG_ETH1ADDR       00:01:af:07:9b:8b
 400 #  define CONFIG_HAS_ETH2
 401 #  define CONFIG_ETH2ADDR       00:01:af:07:9b:8c
 402 #endif
 403
 404 #define CONFIG_SERVERIP         192.168.0.131
 405 #define CONFIG_IPADDR           192.168.0.105
 406 #define CONFIG_GATEWAYIP        0.0.0.0
 407 #define CONFIG_NETMASK          255.255.255.0
 408 #define CONFIG_HOSTNAME         SBC8560
 409 #define CONFIG_ROOTPATH         /home/ppc
 410 #define CONFIG_BOOTFILE         pImage
 411
 412 #endif  /* __CONFIG_H */